gino pinto inc. 2020 home winemaking catalog · grifo grape crusher / grape destemmer (stand type /...

1

2020

HOME WINEMAKING

CATALOG

Gino Pinto Inc.

Equipment, Supplies, Accessories, & Bottles For The Home Winemaker

Physical Address: 373 S. White Horse Pike, Hammonton, NJ 08037

Mailing Address: PO Box 72, Hammonton, NJ 08037

Tel: (609)-561-8199 Fax: (609)-561-3429

Web: www.ginopinto.com

Email: [email protected]

2

Gino Pinto Inc. 373 S. White Horse Pike, Hammonton, NJ 08037 Tel 609-561-8199 Fax 609-561-3429

Company Background:

Gino Pinto Inc. is a family owned and operated business which was established in 1968 by Gino Pinto. Gino Pinto Inc.

imports winemaking equipment and supplies from Europe for distribution to its clientele here in the U.S. Gino Pinto Inc.

also sources wine making equipment from domestic manufacturers in the U.S. as well as distributes fresh wine grape

and grape juice from our suppliers in the U.S. and Chile. Gino Pinto Inc. is located in Hammonton, New Jersey.

Terms & Prices: All prices are List FOB Hammonton, NJ . Terms are cash, credit card, or approved check on delivery. Prices are subject to

change without notice.

Shipping: Orders are shipped via UPS or common carrier on a prepaid basis, billed on your invoice.

Damage Or Loss Claims: When you sign for your freight bill be sure to verify the number of cartons received. Any discrepancy or damages must

be signed by the driver at the time of delivery on the freight bill in order to honor the claim.

Returns: Returned merchandise must be authorized by Gino Pinto Inc. and is subject to a 25% restocking fee. Merchandise must

be returned within 30 days of original purchase date.

Customer Pick Up: Please call in 24 hours in advance when picking up large orders.

3


Table of Contents

Parts Section For Equipment And Stainless Steel Tanks 72

Enolmatic Model Bottle Filler Parts 80-82

Enolmatic Tandem Filter Parts 83

Grifo Hobby Wine Filter Parts 84

Grifo Model E3M Bottle Filler Parts 78

Grifo Grape Crusher / Grape Destemmer (Stand Type / DMC,

DMCSI, DMCI) Parts

85-87

Grifo Floor Corker- Parts 89

Marchisio PVC Capsule Heat Shrink Applicator, Bench Model,

110 Volt Parts

88

Marchisio Electric Pump Bronze / Model 20 Type EEM20

Parts

94

Marchisio Ratchet Press Parts 92-93

Marchisio Stainless Steel Tanks-Replacement Parts 73-75

Reber Tomato Processor Parts 96

Sansone Stainless Steel Tanks-Replacement Parts 76-77

Zambelli Hydro 20 to 80 (Water) Press Parts 90-91

Zambelli Red Large Floor Corker Parts 89

Zambelli S.S. Bottle Filler, Model “Hobby 3&5” Parts 79

Zambelli “Tifone T-12” Pump Parts 95

Premium Wine Grapes & Juice For Home Winemakers 97

Fruit Juice For Home Winemakers 98

4


Accessories

Air Vent (Twin Bubble)…….Price $1.50

Air Lock- Hydraulic (Plastic)...Price: $3.50

Auto Siphon For Barrels & Damigiane

• Single stroke action draws a siphon without disturbing sediment.

• Precision designed for smooth, leak-free operation.

• Simple to sanitize, dead easy to use.

• Removable tip prevents siphoning of sediment.

Price: $11.00

Wine Sampler-The Thief

• Unique design allows you to insert a standard hydrometer

directly into The Thief.

• High grade acrylic for excellent clarity.

• Measures 19" in length.

• Simply dip once for a quick sample.

• Just touch the tip to the rim to empty The Thief.

Price: $10.00

Three Piece Wine Sampler (Thief)

This unique Sampler can be broken down into three pieces for easy cleaning.

• 18” long (45 cms)

• BPA Free

Price: $6.95

5


Accessories

Bottle Brush…..Price: $4.50

Carboy Brush ….Price: $6.50

Demijohn Brush

Cat. No.: 00046500 ……....Price: $35.00

Food Grade Hose, 3/4”, per foot…….Price: $5.25

6


Accessories

Food Grade Oil For Hydraulic Press (1 liter) ……....Price: $12.50

Funnel, Capacity 14 cm .… Cat. No.: 54/14-BIM/ Price: $2.25

Funnel, Capacity 22 cm .......Cat. No.: 54/22-BIM/ Price: $4.00

Funnel, Capacity 24 cm .......Cat. No.: 54/24-BIM/ Price: $4.50

Funnel, Capacity 26 cm with filter support.......Cat. No.: 43/26-BIM/ Price: $6.50



Funnel Screen For cm. 26, 30, 35…Cat. No.: 147/12-BIM/ Price: $2.50

Beer & Wine Hydrometer………..…….Price: $7.50

The Mix-Stir

Specially designed for mixing and stirring wine/beer and de-gassing.

• Manufactured in high quality polycarbonate with ABS blades and stainless steel insert.

• The blades act like a turbine for maximum mixing and stirring efficiency.

• The Mix-Stir fits any electric drill (variable speed drill with reversing capacity recom-

mended).

• The Mix-Stir comes standard in a 24" length. It is long enough to be used in large pri-

mary fermenters and barrels.

• The Plastic blades also make it safe to use with glass carboy.

Price: $15.95

7


Accessories

Oak Chips (American), 1LB Bag, …………..Price: $4.50

Oak chips can add attractive oak flavors and aromas to wines. They are espe-

cially useful during red wine fermentations in stabilizing color and moderating

overly vegetal characteristics. Oak chips may be added during or after fermen-

tation. They can be added in loose form to red fermenters or suspended in tanks

via immersible “soaking” bags. The suggested usage rate 4 ounces per 5 gal-

lons. Recommended contact time varies according to particular applications, but

full extraction will usually occur within 8 weeks. Rinse in hot water before use.

WineStix For Carboys – American Oak, 2 per package / Price: $9.95

WineStix For Carboys – French Oak, 2 per package / Price: $12.95

One stick for 5-6 gallons, Good for two seasons, when done with season’s wine

keep the wood wet and scrub with a stainless steel (sanitized) brush; keep wet

and double wrap with plastic stretch wrap and freeze. Thaw and put in the next

wine. This will give 2nd season barrel type extractions and flavors. Available in

different toast levels.

WineStix For Tanks-American Oak, 1 per package / Price: $34.00

WineStix Tank Staves are sized so that one Stave is the dosage for 30 gallons

of wine. Please allow 3 months minimum extraction time to balance the ex-

tractions of short and long grain.

Oak Sticks

8


Accessories

Polypropylene Oak Flavoring Tube For 5 & 6 Gallon Carboys…....Price: $19.95

The flavoring tube is a convenient way to add oak flavors to your wine.

Measurements: 0.930” Diameter x 16” Long

Polypropylene is the same material used in the manufacturing of baby bottles and is a wine friendly material.

Polypropylene Oak Flavoring Tube For 15 Gallon Damigiane, 30 & 59 Gallon Barrels…....Price: $25.95

The flavoring tube is a convenient way to add oak flavors to your wine.

Measurements: 1.495” Diameter x 21” Long

Polypropylene is the same material used in the manufacturing of baby bottles and is a wine friendly material.

Sulfur Burning Holder ………………….......Price: $35.00

The Sulfur Burning Holder is a perforated stainless steel tube and is 1.388” OD X 4” long. It’s made from 304 stainless

steel with a welded end plug. It’s suspended on an 24” Aluminum Rod and held with a solid rubber bung.

The sulfur disc or strip is placed in the tube where it burns. Drippings are contained within the tube.

Jet Carboy & Bottle Washer…....Price: $10.99

The Jet Carboy and Bottle Washer is your best solution for cleaning any size bottle or carboy. Attach washer to a

laundry tub faucet and washer is ready to work for you by directing a powerful stream of water from your faucet

into the vessel you wish to clean.

An adapter is available to fit your kitchen faucet by removing aerator and attaching adapter and washer.

9


Accessories

Siphon Kit……………………...Price: $14.00

Shrink Capsules (Each)…………….Price: $0.10

Plastic Wine Bottle Rack…………..Price: $5.95

Stainless Steel Must Plunger

With a 10 inch diameter disc and 48 inch (1”OD) handle

Price: $75.00

10


Accessories

Sulfur Stick………………..………Price: $2.00

Testing Tube…………………….… Price: $3.25

Titrator Accessory Pack, #A-0053………Price: $18.00

Vino o meter………..………………...Price: $5.95 A simple and quick way to check your alcohol level in your dry wines.

Strainer …………………...………Price: $2.50

11


Barrels

American Oak

World Cooperage, Traditional Series, American Oak Barrel, 200 Liter (53 Gallons)

Price: $450.00

• Medium Plus Char Level

• Diameter Of Head: 54cm

• Circumference Of Head: 170cm

• Diameter Of Belly: 65cm

• Circumference Of Belly : 204cm

• Barrel Height: 89cm

• Diameter Of Bung Hole: 50mm

• Capacity: 53 gallons

World Cooperage’s traditional series offers a classic barrel for your winemaking needs. This barrel is the world’s best

value thanks to the amazingly consistent and well-rounded oak character it imparts during aging.

American Oak

World Cooperage, Traditional Series, American Oak Barrel, 225 Liter (59 Gallons)

Price: $495.00

• Medium OR Medium Plus Char Level








American Oak

American Oak

STOCKING Medium Plus Char Level

STOCKING Medium & Medium Plus

Char Level

12


Barrels

Hybrid-French / American Oak

World Cooperage, Traditional Series, Hybrid - French / American Oak Barrel,

225 Liter (59 Gallons)

Price: $625.00

• Medium Char Level







• French Oak Heads And American Oak Staves


World Cooperage’s traditional series offers a classic barrel for your winemaking needs. This barrel is the world’s best

value thanks to the amazingly consistent and well-rounded oak character it imparts during aging.

French Oak

World Cooperage, Traditional Series, French Oak Barrel, 225 Liter (59 Gallons)

Price: $995.00

• Medium Char Level








STOCKING Medium

Char Level

French Oak

Hybrid-French / American Oak

STOCKING Medium

Char Level

13


Barrels

American Oak

TW Boswell, American Oak, Soleil Barrel, Special Reserve, 225 Liter (59 Gallons)

Price: $625.00

• Special Reserve wood is 36 month seasoned, extra-fine grain oak.

• Medium Plus Char Level

• Sensory Attributes: Caramel, Confectionary, Sweet Mid-Palate, Toast, Tropical

Fruit, Vanilla

• Pairs well with Chardonnay and ripe jammy reds.








American Oak

STOCKING Medium Plus Char Level

14


Whiskey Barrels / Used

Used Whiskey (Bourbon) Barrel, American Oak, 200 Liter (53 Gallons)

• Diameter Of Belly: 24”

• Diameter Of Head: 22-¼”

• Barrel Height: 35”

• Weight: Approximately 105 lbs


• Bung Hole: 2”

Used Whiskey (Bourbon) Barrel / Call For Quote

15


Barrel Accessories

Silicone Barrel Bungs Silicone Barrel Bungs, Zeta Style, Z-50 / Price: $9.50

For Barrel

Hole Ø

Reference Ø At

Bottom

Ø At

Top

Height Ø Flange

50 mm Z-50 45 mm 54 mm 30 mm 69 mm

Silicone Barrel Bungs, Fermentation Style, F-19 / Price: $9.50

For Barrel

Hole Ø

Reference Ø At

Bottom

Ø At

Top

Height

48 mm F-19 45 mm 54 mm 54 mm

Chrome Spigots Chrome Spigot, 12 mm / Cat. No.: 00056650 / Price: $26.50

Chrome Spigot, 16 mm / Cat. No.: 00056660 / Price: $32.00

Spigots

Wooden Spigots Wooden Spigot #2 / Cat. No.: 00056270 / Price: $9.50

Wooden Spigot #3 / Cat. No.: 00056275 / Price: $10.00




16


Barrel Accessories

Drilled Rubber Stopper #3 …....………..……… Price: $1.50

Drilled Rubber Stopper #6 …....………..……… Price: $1.75

Drilled Rubber Stopper #6 ½ ….……….……… Price: $1.75

Drilled Rubber Stopper #7 …….……….………Price: $1.75

Drilled Rubber Stopper #7 ½ …….………….… Price: $1.75

Drilled Rubber Stopper #8 ½ ………….…….… Price: $2.00

Drilled Rubber Stopper #9 ½ .…….....…………. Price: $2.50

Drilled Rubber Stopper #10 ……...….………… Price: $3.00

Drilled Rubber Stopper #10½ .…..….….……… Price: $3.00

Drilled Rubber Stopper #11 ...….…..……...…… Price: $3.00

Drilled Rubber Stopper #11 ½ .....…..………...… Price: $4.00

Drilled Rubber Stoppers

Solid Rubber Stoppers

Solid Rubber Stopper #6 …....……..……...…… Price: $1.75

Solid Rubber Stopper #6 ½ ……..…………...…Price: $1.75

Solid Rubber Stopper #7 …….……………...… Price: $1.75



Solid Rubber Stopper #10 .……...…….……..… Price: $3.00

Solid Rubber Stopper #10 ½ .……..…………… Price: $3.00

Solid Rubber Stopper #11 …….…..…………… Price: $3.00

Notes:

• #11 stopper fits the Bunghole (2” Diameter) of a Kelvin Cooperage 200, 225, 228, & 300 Liter Barrel.

• #8 stopper fits the Bunghole (1.5” Diameter) of a Kelvin Cooperage 95 Liter Barrel.

• #7 stopper fits a 3, 5, and 6 gallon carboy.

• #10 ½ stopper fits the airlock hole in a Marchisio stainless steel tank floating lid.

17


Barrel Racks

Move more barrels, cut handling time, utilize air space, save floor space, and prevent product damage with the use of

portable steel barrel racks (powder coat paint). These portable steel barrel racks come in a variety of configurations

that include single and stackable barrel systems as well as two and four barrel systems. Made in the U.S.A. with 16

gauge Steel and ¼" flat bar. Powder coated.

Double Barrel Racks

Double Barrel Rack, 7” With 4 Cross Bars, For 53 Gallon Barrels And Up-Burgundy Color

Price: $150.00

Cat. No.: BR24-BUR

REFURBISHED -Double Barrel Rack, 7” With 4 Cross Bars, For 53 Gallon Barrels And Up-Burgundy Color

Price: $135.00

Cat. No.: BR24-BUR-REFURB

18

Gino Pinto Inc.

Double Barrel Rack, 7” With 4 Cross Bars, For 30 gallon Barrels-Burgundy Color

Price: $135.00

Cat. No.: BRS24-BUR

Reversible Barrel Rack, Holds 30 gallon or 53 Gallon And Up / Price: $120.00

Cat. No.: BR01-BUR

19

Gino Pinto Inc.

Wine Bottles

Bordeaux Style, Model #CWA-017, 750 ML, Antique Green

12 Count Case / Price: $12.50

Bordeaux Style, Model #CWBL-017, 750 ML, Blue


20

Gino Pinto Inc.

Wine Bottles

Bordeaux Style, Model Ecova Optima, 750 ML, Flint

Weight: 390g, Height: 300mm

12 Count Case.…….….... Price: $12.50

(Reference #: 6841WB / SCG)

Bordeaux Style, Model #CW-027, 750 ML, Flint

12 Count Case.…….….... Price: $12.50

21

Gino Pinto Inc.

Wine Bottles



Bordeaux Style, Model #CWF-028, 750 ML, Frosted Glass


22

Gino Pinto Inc.

Wine Bottles



Bordeaux Style, Model #CWG-3266, 750 ML, Dark Green


23

Gino Pinto Inc.

Wine Bottles

Bordeaux Style, Tapered Bottle, Model #CWA-0118, 750 ML, Antique Green


Bordeaux Style, Deep Punt, Tapered Bottle, Model #CWA-0128, 750 ML, Dark Green


24

Gino Pinto Inc.

Wine Bottles

Burgundy Style, Model #CWA-033, 750 ML, Antique Green


Burgundy Style, Model #CWD-033, 750 ML, Dead Leaf


25


Wine Bottles

Burgundy Style, Model #CWF-033, 750 ML, Flint


26


Wine Bottles



Bordeaux Style, Model #CW-024, 375 ML, Flint (Clear)


27


Wine Bottles





28


Wine Bottles

Hock Style, Model #CWA-0119, 750 ML, Antique Green


Hock Style, Model #CW-0219, 750 ML, Flint


29


Wine Bottles

Hock Style, Model #CWBL-0119, 750 ML, Blue


Opera Bottle, 500 ML, Flint (Clear)


30


Wine Bottles

Ice Wine Style, Model #CW-021, 375 ML, Flint (Clear)


Ice Wine Style, Model #CWA-011, 375 ML, Antique Green


31


Wine Bottles


Bordeaux Style, Model #CW-0316, 1.5 Liter Bottle With Cork Finish, Dark Green

Bordeaux Style, Model #CW-0326, 1.5 Liter Bottle With Cork Finish, Flint


32


Wine Bottles

Spumante Style, Model “SP. TE ASTI SE 13 78.8 FC29 AG”, 750 ML, Dark Green


Notes:

1. The pressure rating on this bottle is 7 bar max continuous pressure and 10 bar max peak pressure.

2. The cork size recommended for this bottle is 30.5 mm x 48 mm with 2 Bevels.

3. The crown cap size recommended for this bottle is a 29 mm crown cap.

4. Imported from Italy-Ver

33


Large Format Bottles

Dama Romagna, 5 Liter, Screw Top, Mezzo Bianco (Half Flint)

6 Count / Price: $29.00

Each / Price: $5.45 Cat. No: SAIDA_DR_TV35_5L_MB

Caps For Bottles

Each / Price: $0.15

Capacity Liters Closure Color Weight (gr) Diameter (mm) Height (mm)

5 Screw Top (TVB35) MB 1250 179.4 348

Costolata, 1 Liter, Mechanical Top, Bianco (Flint)

15 Count/Price: $20.50 Cat. No: SAIDA_COST_T.MECC_1L_B

Mechanical Tops For Bottles

Each / Price: $0.20

Capacity Liters Closure Color Weight (gr) Diameter (mm) Height (mm)

1 Mechanical Top B 470 87.8 308

34


Large Format Bottles

2 LITER, GREEN BOTTLE, SCREW TOP, MODEL DOPPIO LITRO TV

15 COUNT (PLASTIC SHRINK WRAPPED) / PRICE: $19.95

SCREW CAPS INCLUDED

2 LITER, FLINT BOTTLE, SCREW TOP, MODEL DOPPIO LITRO TV

15 COUNT (PLASTIC SHRINK WRAPPED) / PRICE: $19.95

SCREW CAPS INCLUDED

35


Bottles

5 Liter Magnum Bottle, Dark Green

5 Liter Magnum Bottle, Dark Green, Each / Price: $12.25

1 Liter Chianti Bottle

Each / Price: $2.95

Case of 18 Bottles (Shrink Wrapped) / $49.50 ($2.75 Each)

36

Bottle Fillers


Zambelli “Hobby 3” Bottle Filler, Stainless Steel Body With three stainless steel spouts.

Cat. No. 7623/H / Price: $395.00

• Dimensions (mm) - 410 x 490 x 560 (h)

• Bottles per hour - 275

• Weight (kg) - 7.5

Zambelli “Hobby 5” Bottle Filler, Stainless Steel Body With five stainless steel spouts.

Cat. No. 7624/H / Price: $495.00

• Dimensions (mm) - 670 x 490 x 560 (h)

• Bottles per hour - 390

• Weight (kg) - 10.5

Bottle Fillers-Accessories

Siphon Bulb For Zambelli “Hobby” Bottle Filler

Cat. No. SBZHF / Price: $17.50

37

Bottle Fillers

Enolmatic / Electric Automatic Bottle Filler


The Enolmatic is the only vacuum filler coupling small size and easy operations with professional features and performance. Hourly

filling rate is about 250 bottles per hour. This unit is the ideal equipment for filling wine. Other liquids such as oil, spirits, liquor, tomato

sauce, and fruit juices, can also be filled with the proper additional kit. The filler is constructed of top quality food grade materials and

is reliable. A carboy, barrel or demijohn can be placed below the Enolmatic filler for up to 13 feet (4 meters). The filler is practical and

you can adjust the filling level just once and it remains as default value, adjust the filling speed, and you can use Enolmatic with every

type and size of bottle. Enolmatic Bottle Filler…………………………...Price: $395.00

Enolmatic Technical Specifications

Production WINE: about 250 bottles per hour

OIL: about 150 bottles per hour

LIQUORS: about 200 bottles per hour

Dimensions 200 x 400 x 400 mm

Weight 4 kg

Power Supply 110V (220V-60Hz available upon request)

Bottle Features (with standard nozzle)

Neck Inner Diameter from 16 mm up to 28 mm

Bottle Height from 250 mm up to 330

mm

Bottle Fillers-Enolmatic Accessories

Tandem Vacuum Filter For Enolmatic

The Tandem vacuum filter for the Enolmatic is designed to operate

with the filler performing filtering and bottling at the same time. The

vacuum operating mode allows you to maintain product quality and

avoid spoilage and waste. The product is always handled in the most

natural way throughout the process.

Tandem Vacuum Filter For Enolmatic, (Filter Cartridge Not Included).

Price: $195.00

38


Bottle Fillers-Enolmatic Accessories

Demi John Kit For Enolmatic

Filtering Cartridges For Wine For Enolmatic

Enolmatic Filter Cartridge, Micron Size (.2), Ultra Fine Filter For White Wine……….Price: $85.00

Enolmatic Filter Cartridge, Micron Size (.5), Extra Fine Filter For White Wine………Price: $85.00

Enolmatic Filter Cartridge, Micron Size (1), Fine Filter For Red Wine..…………….Price: $85.00

Enolmatic Filter Cartridge, Micron Size (5) , Medium To Coarse Filter For Red Wine….Price: $85.00

Enolsan Detergent And Disinfectant For Filter Cartridges

Bottle ……………....Price: $19.95

For racking wine from one demijohn or carboy to another. Two different sizes are supplied for filling 34 or 54 liters

demijohns. Demi John Kit For Enolmatic………..Price: $45.00

39


Bottle Washing

Avvinatore Bottle Rinser-Table Model (Stands Alone)

Cat. No.: 00046820 / Price $23.50

Bottle Tree Drainer-Holds 80 Bottles

Price $23.50

40


PVC Capsule Heat Shrink Applicator, Bench Model

Cat. No.: 0055200 / Price: $180.00

Bottle Finishing

PVC Capsule Heat Shrink Applicator, Hand Held, Stainless Steel

Cat. No.: 00055400 / Price: $280.00

41


Damigiane

Damigiane With Narrow Mouth, Weaved Casing And Spigot

25 Liter With Weaved Casing And Spigot, (6.6 Gallons)……………….. Price: $49.95

54 Liter With Weaved Casing And Spigot, (14.25 Gallons) …………….. Price: $69.95

Damigiane With Narrow Mouth, Plastic Casing And NO Spigot

10 Liter With Plastic Casing And No Spigot, (2.6 Gallons)……………….. Price: $17.00

25 Liter With Plastic Casing And No Spigot, (6.6 Gallons)……………….. Price: $28.50

34 Liter With Plastic Casing And No Spigot, (8.8 Gallons) ...……………... Price: $39.50

54 Liter With Plastic Casing And No Spigot, (14.25 Gallons) …………….. Price: $43.50

Damigiane With Wide Mouth, Plastic Casing And NO Spigot

10 Liter With Wide Mouth, Plastic Casing And No Spigot, (2.64 Gallons) … Price: $18.25

Carboys

3, 5 & 6 Gallon Carboys

3-Gallon Carboy …………………. Price: $23.00

5-Gallon Carboy …………………. Price: $26.00

6-Gallon Carboy …………….…….Price: $29.00

42


Chemicals & Additives

Acid Blend, 3 oz ...Price: $3.50 / Acid blend is commonly used to increase the acidity of a must. Usage Varies.

Ascorbic Acid, 2 oz …Price: $3.50 / Ascorbic acid is used as an anti-oxidant in grape must and wine.

Bentonite, 4 oz …Price: $2.75 / A very fine clay used as a fining or clarifying agent in wine. Use 2 ½ tsp, mixed well in hot water.

Campden Tablets, 2 oz (approximately 100 tablets)…Price: $4.50 / Tablets used in winemaking to sanitize equipment and add free SO2

to the must or wine. When crushed and dissolved, they provide sulfur dioxide (SO2) in a convenient form. Tablets are made with Potassium

Metabisulfite. Tablets must be crushed to use. For sanitizing bottles and other equipment, use two crushed tablets dissolved in 1 gallon of

water. For adding to must, use one crushed and dissolved tablet per gallon of must and wait 12 hours before adding yeast. 1 tablet per

gallon =30 ppm SO2.

Calcium Carbonate, 1 pound…Price: $3.00 / Lowers acidity in wine. Use 5/8 teaspoon per gallon to lower acidity .15%. Use before

fermentation. Do not reduce acid more than .30%.

Citric Acid, 1 pound…Price: $4.95 / Citric acid is added to wines to increase acidity and is best added after all signs of fermentation

have disappeared.

Citric Acid, 2 oz …Price: $2.50 / Citric acid is added to wines to increase acidity and is best added after all signs of fermentation have

disappeared.

Fermax Yeast Nutrient, 4 oz ...Price: $3.50 / Fermax is a premium nutrient containing diammonium phosphate, dipotassium phosphate,

magnesium sulfate and autolyzed yeast. This yeast energizer acts as a food for the yeast and promotes rapid starting and complete fer-

mentation. Use: 1 teaspoon per gallon of wine.

Gelatin, 200 Bloom, 2 oz …Price: $2.50 / Fining agent for wine. Effectively removes excess tannins and coloring particles from wine.

Usage: 1/2 teaspoon per 5 gallons. Dissolve in ½ cup water, let stand, then add.

Malic Acid, 1 pound…Price: $5.50 / Malic acid is used to increase acid in wine juice. Use prior to fermentation.

One Step Cleanser, 8 oz, Pail…Price: $5.50 / One Step Cleanser is the only no-rinse cleanser that uses active oxygen to do its work.

Does not contain chlorine, bisulfate, organic compounds or phosphates. Simply add 1 tablespoon One Step per gallon of cold or warm wa-

ter and dissolve. Rinse or soak equipment and bottles with the One Step solution and use. For best results, insure that you have a 30 sec-

ond contact time with the One Step solution. Perfect for stainless steel tanks as One Step Cleanser will not harm metal surfaces.

Pectic Enzyme, 0.5 fluid oz …Price: $3.00 / A liquid that is added to crushed fruit to increase juice extraction. Also used during fermen-

tation to eliminate pectin hazes. Pectic enzyme increases juice yields from fruits by breaking down cellular structure. Also acts as a clarifi-

er, and is used to clear hazes caused by residual pectins. Use: Add 1/4 teaspoon per 6 US gallons of wine.

Potassium Metabisulfite, 1 pound …Price: $5.25 / Potassium Metabisulfite is a common wine or must additive, in which it forms sul-

fur dioxide gas (SO2). This both prevents most wild microorganisms from growing, and it acts as a potent antioxidant, protecting both the

color and delicate flavors of wine. It can be used for sanitizing equipment and the must from which wine is to be made.

43


Chemicals & Additives... Continued

Potassium Sorbate, 1.5 oz …Price: $2.50 / Potassium Sorbate is a wine stabilizer that should be used in conjunction with Campden or

its active ingredient, Potassium Metabisulfite. In other words, it works better with sulfites present than without, and it works better than

sulfites alone. Potassium Sorbate disrupts the reproductive cycle of yeast. Yeasts present are unable to reproduce and their population

slowly diminishes through attrition. Potassium Sorbate is added in the amount of 1/2 teaspoon per gallon of wine. Sorbic Acid results and

stabilizes the wine. Usually the crushed Campden and Potassium Sorbate are dissolved in a cup or two of the wine to be stabilized and

stirred thoroughly. Allow the stirred wine to sit a few moments and look for small white lumps of undissolved powder. If present, continue

stirring until the wine is clear without any undissolved lumps. This is then added to the larger batch and stirred in well with a sanitized

glass rod or wooden dowel. Once a wine is stabilized it can be sweetened if desired.

Sparkolloid Powder, 1 oz….Price: $2.50 / Sparkolloid is used as a fining (clearing) agent. Use: Dissolve 1 tbsp in 1 cup ( 8 fl oz.) of

boiling water for 5 minutes. Add mixture to 6 U.S. gallons of wine. Stir gently. Allow wine to settle for approximately a week, then rack.

Tartaric Acid, 3 oz …Price: $7.50 / Tartaric acid added to wine adjusts the acidity level and pH levels. If the acidity is too low and the

pH level too high, the wine becomes unstable and susceptible to spoilage through bacterial growth.

Yeast D-47, 5 grams …Price: $.95 / Recommended for making wines from white varieties such as Chardonnay and rosé wines. An excel-

lent choice for producing mead, however be sure to supplement with yeast nutrients, especially usable nitrogen. An excellent choice for

dry whites, blush wines and residual sugar wines.

Yeast EC-1118, 5 grams …Price: $.95 / The EC-1118 strain is recommended for all types of wines, including sparkling, and late harvest

wines and cider. It may also be used to restart stuck fermentations. An excellent choice for champagnes and late harvest wines. Also a

very good choice for dry whites.

Yeast K1-V1116, 5 grams …Price: $.95 / The K1V-1116 strain tends to express the freshness of white grape varieties such as Sauvi-

gnon Blanc, Chenin Blanc and Seyval. The natural fresh fruit aromas are retained longer than with other standard yeast strains. Fruit

wines and wines made from concentrates poor in nutrient balance benefit from the capacity of K1V-1116 to adapt to difficult fermentation

conditions. Restarts stuck fermentations. Highly recommended for dry whites, aged reds, and late harvest wines.

Yeast RC-212, 5 grams …Price: $.95 / RC 212 is recommended for red varieties where full extraction is desired. Lighter red varieties

also benefit from the improved extraction while color stability is maintained throughout fermentation and aging. Aromas of ripe berry and

fruit are emphasized while respecting pepper and spicy notes. An excellent choice for both young & aged red wines.

Yeast 71B-1122, 5 grams …Price: $.95 / The 71B is used primarily for young wines such as vin nouveau and has been found to be very

suitable for ice wine, blush and residual sugar whites.

Super-Kleer K.C., 2.2 oz …Price: $4.50 / Super-Kleer K.C. is a two stage wine and beer clarifying kit. Contains two pre-mixed pouches

of kieselsol and chitosan.

44


Corkers

Grifo - Green Italian Floor Corker

Cat. No.: 00047800 / Price: $85.00

Marchisio - Small Floor Corker

Cat. No.: 00047850 / Price: $65.00

Zambelli - Large Red Floor Corker

Cat. No.: 7522/F / Price: $125.00

45

Corks


Note on cork sizes.

#8 and #9 corks refer to the diameter of the cork.

#9 corks have a diameter between 23.5 mm and 24 mm.

#8 corks have a diameter between 22 mm and 23 mm.

Natural Corks- are made from a solid piece of cork.

Amorim Acquamark Natural Cork (Colmated)

Cat. No. ARCO0903106

Body Dimensions: (Ø x H): 24 mm x 45 mm

#9 Cork Size

Price: Quantity 1000 -$169.00


Agglomerated Corks- Agglomerated corks are made from cork granules that are held together by a special cork epoxy.

1+1 Agglomerated consists of the body being made from cork granules and both discs or ends being made of all

natural cork.

Amorim Twin Top B BWC Stopper (1+1 Agglomerated)

Cat. No. ARCO0903108

Body Dimensions: (Ø x H): 23.5 mm x 44 mm

#9 Cork Size



All Agglomerated With Grape Logo

Cat. No. TSU00361P

Body Dimensions: (Ø x H): 23 mm x 42 mm

#8 Cork Size



46

Corks


Barrel Corks

Barrel Cork Price: $2.25 Each

Synthetic Corks- are made from polymer resins.

Expancork From LaBrenta (EMULA Series)

Expancork is LaBrenta’s patented flagship product. The outside structure of the cork allows the same atmosphere of

an traditional natural product, while the synthetic material ensures optimal preservation of the wine. Expancork is

suitable for bottling still and sparkling wines with a medium-long storage period.

Size (22.5 mm x 42 mm), Cream Color With Grape Logo

#8 Cork Size



Black Plastic T-Top Cork With Synthetic Body

Cat. No. TSP000250

Head Dimensions:

(Ø x H): 29 x 9 mm

Body Dimensions:

(Ø x H): 19.5 x 20 mm


47


Fermentation Tubs-Red Plastic

Description Size Price

Red Plastic Fermentation Tub With Out Lid 110 Liter $36.00







Capacity lt. Weight kg. A (mm) B (mm) C (mm) D (mm) H (mm)

110 4 800 730 95 680 300

225 6 860 790 115 675 550

350 8.8 940 870 125 720 710

500 11.2 1045 970 80 840 815

700 17.6 1160 1095 95 940 895

1000 28 1340 1240 175 1110 950

Dimensions For Fermentation Tubs

48


Fermentation Tub Options & Accessories

Description Size Price

Red Plastic Lid For Fermentation Tub 300 Liter $22.50



Lids For Fermentation Tub

Plastic Spigot, 7 ¾“

Cat. No.: 20/1-BIL

Price: $20.00

Screen For Fermentation Tub

Cat. No.: 17-BIL / Price: $8.50

49


Plastic Barrels (FUSTINO A BOTTICELLA) -White

White Plastic Barrel (50 Liter)…Cat. No.: 97/050-N / Price: $38.00

White Plastic Barrel (100 Liter) ..Cat. No.: 97/100-N / Price: $62.50

Fermentation Tubs-White Plastic

White Plastic Fermentation Tub (50 Liter) With Lid

Cat. No.: 19/050N / Price: $30.50

White Plastic Fermentation Tub 100 Liter) With Lid

Cat. No.: 19/100N / Price: $40.50

50


Fermenter-Conical

FastFerment’s 7.9 gallon conical fermenter eliminates racking and transferring by doing primary and secondary fermentation in one

vessel.

Easy & Efficient-The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary

fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80%

of the time & labor needed to make a batch of beer or wine compared to traditional methods. With less equipment, clean up is easy.

Premium-FastFerment is a professional system for the average Homebrewer & Winemaker. The conical design limits exposure to oxygen

& allows for yeast harvesting. The end result is consistent high quality batches of beer & wine.

Benefits Over Traditional Conicals-The downfall of other conical fermenters is that you have to ferment the product with the valve

closed and then the sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the

sediment out the bottom. This results in two main issues:

1. You need to time the flushing of the sediment perfectly to ensure minimal loss of product.

2. As the sediment is flushed out, there will always be yeast and the sediment hazes that float up into the product remaining in the unit.

Why Use FastFerment?

1. Guaranteed Consistent Batches

2. Primary & Secondary Fermentation in the Same Container

3. No Transfers & No Racking - 80% Less Work

4. Better Quality Product with No Sediment Contamination

5. Increased Sanitation with Less Contamination

6. Less Oxygen Exposure

Ability to Harvest Yeast & Save for Reuse

New Features and Benefits

1. Easy Cleaning and Batch Stirring - 6" (15cm) removable screw top

2. Total Capacity 7.9 US Gallons/ 30 Litres - Made for 5 - 7 Gallon batches with blow offs

3. Easy Wall Mounting System - Mounts to standard 16" (40cm) wall studs

4. 33% Bigger Valve for Increased Flow Rate - 1" (2.5cm) Bottom valve compared vs. 3/4" (2cm)

5. Collection Ball for Yeast Harvesting - Save $100's & harvest your Yeast Strains!

6. Temperature Monitoring Capabilities- ThermoWell included - Thermometer Available.

Kit Contents

1. One 7.9 US Gallon / 30 Litre Conical Fermenter

2. 6" (15cm) Screw Top, Grommet & Airlock

3. Bottom Collection Ball For Harvesting Yeast

4. 1" Union Teflon Valve and fittings

5. Wall Mounts (2), Mounting Bolts & Anchors (4)

6. 1/2" (1.25cm) PVC Hose (2' /60cm) & Hose Clamp

7. Permanent Thermowell for Temperature Monitoring

8. Instructions

Cat. No.: 41310 / Price: $99.99

51


Fermenter-Conical (Continued)

FastFerment 7.9 gallon conical fermenter (continued)

Specifications

1. Made with HDPE: Food Grade

2. 7.9 US Gallons (30 liters)

3. 1” (2.5cm) Teflon Seated Union Valve

4. 6” (15cm) Removable Screw Top Lid http://www.fastbrewing.com/products/fastferment#

Stand / Price: $34.99

Options:

Thermometer / Price: $19.99

Carrying Strap / Price: $14.99

Additional Collection Ball / Price: $19.99

Sample Port / Price: $14.99

http://www.fastbrewing.com/products/fastferment

52


Grifo Hobby Wine Filters

Filters-20x20 cm

Sizing A Filter -Generally each 20x20 cm filter pad will filter between 10 to 15 gallons of wine before needing to be

changed. A 10 plate, 20x20 cm filter will run between 100 and 150 gallons depending on the wine before you need to

change the pads.

Grifo Hobby 6 Plate Filter With Pump, 20x20 cm

• 0.2 Square Meter Surface

• 6 Plates

• Dimensions: 420mm x 300mm x 340mm (h)

• Weight: 16kg

• Production 60 to 200 Liters Per Hour

• 20 x20 Size Plate Filters

• 0.5 Hp Motor

• 110 Volt, 60 Hz

Cat. No.: FCH6 / Price: $395.00

Grifo Hobby 10 Plate Filter With Pump, 20x20 cm

• 0.4 Square Meter Surface

• 10 Plates

• Dimensions: 590mm x 300mm x 340mm (h)

• Weight: 21kg

• Production 120 to 300 Liters Per Hour

• 20 x20 Size Plate Filters

• 0.5 Hp Motor

• 110 Volt, 60 Hz

Cat. No.: FCH10 / Price: $425.00

53


Model Application Price Per 25 Count Package

XE675 Sterilizing $25.00

XE280 Fine Clarifying $22.00

XE90 Medium Clarifying $20.00

XE50 Coarse Clarifying $20.00

Filter Sheets, 20x20 cm (8”x8”)

Model MIN RANGE MAX

XE 675 0.4 0.2 0.6

XE 280 0.5 1 1.5

XE 90 4 5 9

XE 50 6 9 15

Typical particle retention values of XE Model in Microns (um)

54


Grifo Fruit Crushers (Stand Type)

Grifo Small Hand Powered Fruit Crusher With Stainless Steel Hopper- Model PIP

• Hopper size: 430x360 mm

• Nylon rollers

• Stainless Steel Knives

• Stainless Steel Hopper

• Hourly production: 135 to 235 kg

• Weight: 15kg

Cat.# PIP / Price: $275.00

Grifo Hand Powered Fruit Crusher With Stainless Steel Hopper- Model PIG


• Nylon rollers



• Hourly production: 300 to 500 kg

• Weight: 26kg

Cat.# PIG / Price: $365.00

55


Grifo Fruit Crushers (Stand Type)

Grifo Motorized Fruit Crusher With Stainless Steel Hopper- Model PIGMO



• Nylon rollers


• Electric Motor, 110 volt, 1 hp

• Hourly production: 1500 kg

• Weight: 35 kg

Cat. No. PIGMO / Price: $595.00

56


Grifo Grape Crushers (Stand Type)

Grifo Small Hand Powered Grape Crusher With Painted Steel Hopper- Model PP


• Nylon rollers 220 mm

• Painted Steel Hopper

• Hourly production: 500/700 kg

• Weight: 20 kg

Cat. No. PP / Price: $195.00

Grifo Large Hand Powered Grape Crusher With Painted Steel Hopper-Model PG





• Weight: 26 kg

Cat. No. PG / Price: $225.00

57



Grifo Small Hand Powered Grape Crusher With Stainless Steel Hopper-Model PPI





• Weight: 20 kg

Cat. No. PPI / Price: $265.00

Grifo Large Hand Powered Grape Crusher With Stainless Steel Hopper-Model PGI





• Weight: 26 kg

Cat. No. PGI / Price: $325.00

58



Grifo Motorized Grape Crusher With Painted Steel Hopper- Model PM





• Weight: 35 kg

Cat. No. PM / Price: $475.00

Grifo Motorized Grape Crusher With Stainless Steel Hopper- Model PMI






• Weight: 35 kg

Cat. No. PMI / Price: $575.00

59


Grifo Grape Crushers / Grape Destemmer (Stand Type)

Grifo Hand Powered Grape Crusher/Grape Destemmer With Painted Steel Hopper And Painted Steel Body- Model DMA


• Nylon Rollers 220 mm



• Weight: 39 kg

Cat. No. DMA / Price: $395.00

Grifo Hand Powered Grape Crusher/Grape Destemmer With Stainless Steel Hopper And Painted Steel Body- Model DMASI





• Weight: 39 kg

Cat. No. DMASI / Price: $525.00

Same style as the DMA pictured above

only with a stainless steel hopper and

painted steel body.

60



Grifo Hand Powered Grape Crusher/Grape Destemmer With Stainless Steel Hopper & Stainless Steel Body- Model DMAI





• Weight: 39 kg

Cat. No. DMAI / Price: $595.00

Grifo Motorized Grape Crusher / Grape Destemmer With Painted Steel Hopper And Painted Steel Body- Model DMC



• Painted Steel Hopper & Body



• Weight: 54 kg

Cat. No. DMC / Price: $650.00

61



Grifo Semi Stainless Steel Metal Motorized Grape Crusher/De-Stemmer With Stainless Steel Hopper And Painted Steel

Body- Model DMCSI



• 110 Volt, 1 hp motor

• Hourly production 1500 kg

• Weight: 54 kg

Cat. No. DMCSI / Price: $895.00

Grifo ALL Stainless Steel Metal Motor Powered Grape Crusher/De-Stemmer With Stainless Steel Hopper And Stainless

Steel Body- Model DMCI



• 110 Volt, 1 hp motor

• Hourly production 1500 kg

• Weight: 54 kg

Cat. No.: DMCI / Price: $1,195.00

62


Grifo Grape Crusher / Grape Destemmer- Accessories

Painted Metal Stand For Grape Crusher / Grape Destemmer

Cat. No.: CAV / $200.00

Stainless Steel Metal Stand For Grape Crusher / Grape Destemmer

Cat. No.: CAVI / $270.00

63

Presses


Zambelli Multi Use Press

• Cage Size (cm): 20 x 24

• Cage Capacity (Liters): 9.5

• Dimensions (cm): 45 x 45 x 70

• Weight (kg): 12

Cat.# Multi Use Press / Price: $230.00

“Eggplant Press”

• Cage Diameter (cm): 14

• Cage Capacity (Liters): 0.65

• Height Of Press Without Screw (cm): 21.5

• Dimensions of Base (cm): 22.5 x 17.5

• Weight (kg): 3

Cat.# 00013560 / Price: $65.00

64

Presses


Model Diameter Cage Price

TR30 30 $425.00

TR35 35 $495.00

TR40 40 $590.00

TR45 45 $750.00

TR50 50 $895.00

TR55 55 $1,125.00

Marchisio Manual Wooden Ratchet Press With Painted Metal Basin

• Painted Steel Basin

• With Two Wooden Half Moons And 6 Wooden Heels

• Wooden Cage

• Welded Steel Blade Connects Cage Rings To Prevent Cage Deformation

65


Presses

Marchisio Hydraulic Press With Wooden Cage & Painted Metal Base On Wheels

• Painted Steel Basin

• With Two Wooden Half Moons And 6 Wooden Heels

• Working Pressure: 400 atm

• On 3 Wheels

• Wooden Cage

Model Cage

Screw

Cage Lt. Total Height

mm.

Price

TIC45 45 85 1515 $1,950.00

TIC50 50 130 1710 $2,025.00

TIC55 55 170 1800 $2,195.00

TIC60 60 220 1885 $2,650.00

66


Water Presses

The water press enables very high yields in the extraction of juice from apples, grapes, and fruit. The press uses a

bladder that creates uniform pressure towards the outer cage of the press throughout it’s whole length.

Model

Cage

Capacity

Liters

Cage

Dimension

Ø D x E mm.

Dimensions

A x B mm.

C

mm.

Weight

kg

Working

Pressure

Hydro 20 20 270x390 540x830 300 15 4

Hydro 40 40 340x480 650x980 350 20 4

Hydro 80 80 420x580 700x1150 400 36 3

67


Water Press

Model

Name

Cage

Dimension

mm

Cage

Capacity

Liters

Overall

Dimensions

mm

Weight

kg

Price

Hydro 20 270 x 390 20 540 x 830 15 $850.00

Hydro 40 340 x 480 40 650 x 980 20 $1,050.00

Hydro 80 420 x 580 80 700 x 1150 36 $1,395.00

Water Press (Bladder) With Aluminum Cage And Painted Metal Basin

Water Press (Bladder) With Stainless Steel Cage And Stainless Steel Basin

Model

Name

Cage

Dimension

mm

Cage

Capacity

Liters

Overall

Dimensions

mm

Weight

kg

Price

Hydro 40 Inox 340 x 480 40 650 x 980 20 $1,595.00

Hydro 80 Inox 420 x 580 80 700 x 1150 36 $2,050.00

68


Pumps

Marchisio Electric Pump Bronze / Model 20 Type EEM20

• Outlet 3/4”

• Power 0.5 Hp / 110 Volt

• RPM 2800

• Overall Dimensions 248 x 120 x 172 mm

• Weight 5.8 kg

• “TIPO EEM20”

Cat. No.: 00020200 / Price: $145.00

69

Gino Pinto Inc. 373 S. White Horse Pike, Hammonton, NJ 08037 Tel 609-561-8199 Fax 609-561-3429 Gino Pinto Inc. 373 S. White Horse Pike, Hammonton, NJ 08037 Tel 609-561-8199 Fax 609-561-3429

MARCHISIO Stainless Steel Tanks

Marchisio Variable Capacity Tanks, Pneumatic Floater, Flat Bottom, Stand, Model SPA, Stainless Steel (AISI 304)

Models SPA100B (100 liter, short style), SPA150 (150 liter), SPA200B (200 liter, short style), SPA300 (300 liter)

Tank Pricing Includes:

• Pneumatic floater (floating lid)

• Gasket (seal)

• Plastic security valve

• Stainless steel hand pump with gauge

• Partial drain with spigot

• Stand

Cat. No Capacity L. Ø mm h mm F mm V mm Spigot Capacity Gal. Price

SPA100A_SPIG 100 Liters (Taller Style) 400 1000 1 0.7 ½” 26 $370.00

SPA100B_SPIG 100 Liters (Shorter Style) 500 600 1 0.7 ½” 26 $375.00

SPA150B_SPIG 150 Liters 500 900 1 0.7 ½” 26 $425.00

SPA200A_SPIG 200 Liters (Taller Style) 500 1200 1 0.7 ½” 52 $465.00

SPA200B_SPIG 200 Liters (Shorter Style) 650 650 1 0.7 ¾” 52 $515.00

SPA250B_SPIG 250 Liters 650 850 1 0.7 ¾” 66 $555.00

SPA300_SPIG 300 Liters 650 1000 1 0.7 ¾” 79 $585.00

Tank Diagram

Complete With:

1 Pneumatic floater (floating lid)

2 Gasket (seal)

3 Plastic security valve

4 Stainless steel hand pump with gauge

5 Partial drain with spigot

7 Stand

7

Note: Add approximately 15” for the height of the stand.

F

V

70


MARCHISIO Stainless Steel Tanks

Marchisio Variable Capacity Tanks, Pneumatic Floater, Flat Bottom, Stand, Model SPA, Stainless Steel (AISI 304)

Models SPA400A (400 liter, tall style), SPA400B (400 liter, short style), SPA500 (500 liter), SPA700 (700 liter), SPA1000

(1,000 liter)

Tank Pricing Includes:

• Pneumatic floater (floating lid)

• Gasket (seal)

• Plastic security valve

• Stainless steel hand pump with gauge

• Partial drain with 1½” tri-clamp butterfly valve (includes clamp and gasket)

Cat. No Capacity L. Ø mm h mm F mm V mm Valve Capacity Gal. Price

SPA400A-TRI (Tall Style) 400 Liters 650 1300 1 0.7 1½” Tri-clamp Butterfly 105 $710.00

SPA400B-TRI (Short Style) 400 Liters 800 900 1 0.7 1½” Tri-clamp Butterfly 105 $740.00

SPA500-TRI 500 Liters 800 1100 1 0.7 1½” Tri-clamp Butterfly 132 $765.00

Tank Diagram

Complete With:

1 Pneumatic floater (floating lid)

2 Gasket (seal)

3 Plastic security valve

4 Stainless steel hand pump with gauge

5 Partial drain with 1½” tri-clamp butterfly valve

7 Stand

The stand adds around 14” to the height of the tank.

7

71


Tomato Processor

Reber Tomato Processor N. 5 - Model 9103 N Compact table top

model, with 0.40 hp motor, 110 volt, 60 Hz, gear reduction drive,

cast iron body and auger with a food grade baked epoxy finish.

The tomato bowl is aluminum with a nylon tomato pusher.

Cat. No.: 9103 N / Price: $395.00

Adaptor For Grated Cheese For Reber Tomato Processor N. 5 - Model 9103 N

Cat. No.: 8900 N / Price: $99.00

Bench For Tomato Processor For Reber Tomato Processor N. 5 - Model 9103 N

Cat. No.: 8750 N / Price: $115.00

Adaptor For Sausage For Reber Tomato Processor N. 5 - Model 9103 N

Cat. No.: 8811 N / Price: $99.00

72


Gino Pinto Inc.

2020

HOME WINEMAKING CATALOG

PARTS FOR EQUIPMENT

AND

STAINLESS STEEL TANKS

73


Marchisio Stainless Steel Hand Pump With Gauge & Hook / Cat. No.: PM00010/ Price: $43.00

Marchisio Stainless Steel Tanks-Replacement Parts

Pressure Gauge For Marchisio Hand Pump / Cat. No.: PGHP/ Price: $19.00

Brass Knob For Hand Pump / Cat. No.: BKN/ Price: $7.25

Item Cat. No. Price DN KG

Chrome Plated Spigot 3/8” G (BSPP) SSS3/8 $14.00 3/8” 0.15



Note: The thread that screws into the tank is GAS (BSPP).

The outer diameter of the threaded male end is 16.62 mm (0.65”) for the 3/8” spigot.

The outer diameter of the threaded male end 20.95 mm (0.82”) for the 1/2” spigot.

The outer diameter of the threaded male end is 26.44 mm (1.04”) for the 3/4” spigot.

74


Marchisio Plastic Air Vent / Cat. No.: 20130 / Price: $16.00

Note: The height of the air lock with the nut is 118 mm.

Item Cat. No. DM Ø Price

Stainless Steel Tank Stand BI50 50 $94.00



Item Cat. No. Price

Vinyl Gasket 400 mm CA40 $27.00








MARCHISIO TANKS-GASKETS (SEALS)


75



Item Cat. No. DM Ø mm Price

Stainless Steel Tank Lid (Complete), Fits 100A GPC40 400 $148.00

Stainless Steel Tank Lid (Complete), Fits 100B, 150, 200A GPC50 500 $160.00

Stainless Steel Tank Lid (Complete), Fits 200B, 250, 300 GPC65 650 $195.00

Stainless Steel Tank Lid (Complete), Fits 400B, 500, 600, 700 GPC80 800 $235.00

Item Cat. No. DM Ø mm Price

Stainless Steel Tank Lid (Simple), Fits 100A GP40 400 $67.00

Stainless Steel Tank Lid (Simple), Fits 100B, 150, 200A GP50 500 $74.00

Stainless Steel Tank Lid (Simple), Fits 200B, 250, 300 GP65 650 $105.00

Stainless Steel Tank Lid (Simple), Fits 400B, 500, 600, 700 GP80 800 $135.00

Simple is just the lid WITHOUT gasket (seal), airlock, & hand pump.

Complete WITH the lid, gasket (seal), airlock, & hand pump.

Stainless Steel Tank Parts

Clear Flexible Tubing 5/16” Inside Diameter / Cat. No.: BSG5602 / Price Per Foot: $1.50

Note: This tubing is used to connect the stainless steel hand pump to the gasket for all variable capacity tanks.

76


SANSONE Stainless Steel Tank-Replacement Parts

½” Spigot (Rubinetto Salvagoccia)

Cat. No.: RUB-12-A303 / Price: $25.00

1” Spigot (Rubinetto Salvagoccia)

Cat. No.: RUB-1-A303 / Price: $42.00

Plastic Air Vent For Sansone Tanks

Cat. No.: SANPAV / Price: $16.00

77


SANSONE Stainless Steel Tank-Replacement Parts

SANSONE TANKS-GASKETS (SEALS)

Tank

Capacity

Liters

Tank Code Ø of gasket in mm.

(MARKED ON BAG)

Gasket

Cat. No.

Price

100 B0100SAL-F 455 SAN-CA455 $28.75

150 B0150SAL-F 520 SAN-CA520 $30.00

200 B0200SAL-F 570 SAN-CA570 $30.50

550 CA550 $30.25

300 B0300SAL-F 635 SAN-CA635 $31.25

400 B0400SAL-F 695 SAN-CA695 $32.00

500 B0500SAL-F 735 SAN-CA735 $32.50

750 B0750SAL-F 790 SAN-CA790 $33.50

1000 B01000SAL-F 930 SAN-CA930 $36.25

Metal Insert For Sansone Tank Seal

Cat. No.: MISTS / Price: $0.75

*NOTE: In April of 2018 Sansone changed the diameter of the lid for the 100 and 200 liter tanks. The new lids are smaller in width than

the older lids.

Diameter of 100 liter new lid: 17-3/8”- recommended gasket is the Sansone 455 mm gasket.

Diameter of 100 liter old lid: 17-15/16”- recommended gasket is the MARCHISIO 500 mm gasket.

Diameter of 200 liter new lid: 21-3/4”- recommended gasket is the Sansone 570 mm gasket.

Diameter of 200 liter old lid: 22-3/16”- recommended gasket is the MARCHISIO 600 mm gasket.

In order to receive the right gasket for your particular lid please measure the diameter of the lid.

Metal Snap Clip For Sansone Tank Seal

Cat. No.: MSCSTS / Price: $0.35

Metal Clip For Sansone Dust Cover

Cat. No.: MSCDC / Price: $0.45

* Note: a 550 mm gasket will fit

the Sansone 200 Liter tank and

can be substituted for a 570

mm gasket.

78

Bottle Fillers-Parts


Grifo Model E3M Bottle Filler Parts

Gum Rubber Gasket For Spout

Cat. No.: GS / Price: $1.20

79


Zambelli Stainless Steel Bottle Filler, Model “Hobby 3 ” & “Hobby 5” Parts

POS DESCRIPTION PRICE

1 Cover (Specify Model-3 or 5 Spout) Call

2 Inlet Pipe Call

3 Tank (Specify Model-3 or 5 Spout) Call

4 Closing Valve Call

5 Pipe For Spouts With Caps (Specify Model-3 or 5 Spout) Call

6 Spring Call

7 Tightener For Springs (Specify Model-3 or 5 Spout) Call

8 Bottle Rack For 3 Spout Filler (Code: 1143R00186) $32.00

8 Bottle Rack For 5 Spout Filler (Code: 1143R00187) $38.00

9 Spouts Call

10 Cap For Spouts $1.25

11 Float Call

12 Gasket $2.50

13 Drain Tap Call

14 Knob Call

Siphon Bulb For Zambelli “Hobby” Filler

Cat. No.: SBZHF / Price: $17.50

Complete Float-Position #11, #4, #2

Cat. No.: HFCFL / Price: $95.00

Position 10

Cap For Spout Position 12

Spout Gasket

80


Enolmatic Model Bottle Filler Parts Note: See the next page for pricing on nozzle parts.

Position 2.01-Gasket For Vessel Cover

Complete Vessel Cover Plus

Float

POS CODE DESCRIPTION PRICE

Enolmatic Body Parts

2.01 Gasket For Vessel Cover $5.00

4.15 400-0178-000 Enolmatic Vessel $22.00

4.07 910-0040-000 Complete Vessel Cover Plus Float $27.50

81


Enolmatic Model Bottle Filler Parts (Nozzle) -Continued


Enolmatic Nozzle Parts

2.02 520-0052-020 O-Ring, 1.78 x 8.73 Silicone (Red) $0.55

2.06 520-0031-000 O-Ring M, 008020 2 x 8 Silicone (White) $0.75

4.20 520-0044-000 Red Silicone Cone For Wine Nozzle $3.15

4.06 400-0170-000 Nozzle End Piece $2.50

910-0051-000 Complete Enolmatic Nozzle For Wine With Bracket & Spring $49.50

910-0042-000 Complete Enolmatic Nozzle For Wine $32.50

Note: Part Position 4.03 is not available as an individual item. The complete nozzle must be purchased.

For further reference see the parts blowup and description table below. When ordering parts

please use the position numbers above.

Pos. 4.20-Red Silicone

Cone For Wine Nozzle

Pos. 2.02-O-Ring

1.78 x 8.73

Silicone (Red)

Pos. 2.06-O-Ring M

008020 2 x 8

Silicone (White)

Complete Enolmatic Nozzle For

Wine With Bracket & Spring Complete Enolmatic

Nozzle For Wine

82


Enolmatic Model Bottle Filler Parts-continued


Enolmatic Motor Parts

048.022MO 500-0197-000 P15 Pump Piston Lip Gasket $5.00

785.022 500-0199-000 P15 Pump Head Membrane $4.40

Not Pictured 500-0206-000 P15 Vacuum Pump Silencer With Fitting $6.90

524UL/CSA Complete Vacuum Pump P15, 110 Volt, 60 hz $155.00

Enolmatic Motor Technical Drawing

P15 Pump Piston Lip Gasket

83


Tandem Filter (For Enolmatic)- Parts


Tandem Filter-Parts

1023 910-0051-000 Complete Tandem Filter Housing Cover $58.00

425 400-0188-000 Filter Cap O-Ring Holder $5.00

215 520-0040-000 Filter Cap Silicon O-Ring 100 x 4 $5.65

Filter Cap Silicon O-Ring 100 x 4

Filter Cap O-Ring Holder

84


Grifo Hobby Wine Filter, 6 (Model FCH6) & 10 (Model FCH10) Plate, 20x20 cm, Parts


1 Wheel-3 Arm Call

2 End Black Plate 20x20cm DX $10.00

3 End Black Plate 20x20cm SX $10.00

4 Central Gaskets (Tan Color) $1.05

5 End (Terminal) Gaskets (Tan Color) $1.05

6 Pressure Gauge (Manometer) $43.75

7 Painted Metal Plate Call

8 Tray For Filter Call

9 Inside White Plate 20x20cm $10.00

10 Handle Call

11 Threaded Tie For 6 Plate Call

12 Threaded Tie For 10 Plate Call

13 3/4” Plastic Elbow Call

85


Grifo Grape Crusher / Grape Destemmer (Stand Type / DMC, DMCSI, DMCI) Parts

Code POS DESCRIPTION PRICE

SP-DMC-007 7 Nylon Gear For Loading Hopper $8.75

SP-DMC-015A 15A Auger, Painted Metal, Length 420mm $43.75

SP-DMC-015B 15B Auger, Stainless Steel, Length 420mm $56.00

SP-DMC-017 17 Inclined Support For Auger (Butterfly) $3.75

SP-DMC-019 19 Inclined Support For Auger (Butterfly) $3.75

IMPORTANT NOTE: This parts blow up is from an earlier manual prior to the one released in 2016. Position numbers will not match that manual.

86


Grifo Grape Crusher / Grape Destemmer (Stand Type Type / DMC, DMCSI, DMCI) Parts-Continued


IMPORTANT NOTE: The style of switches (On/Off &

Emergency Stop) have changed over the years. In order

to ensure you get the correct switch we recommend you

send us a picture noting the manufacturer number.

Pos. 22B

Pictured

Older style switches pictured

to the left.

POS DESCRIPTION PRICE CODE

18A Stainless Steel Grate (DMC, DMCSI, DMCI) Call

19 8 x 100 MA screw Call

20 Engine Attachment Call

21 Emergency shut off Switch (Check Style) $25.00

22A Switch CE With Mushroom Hp 1 (Check Style) Call

22B 110V ON /OFF Switch $27.50 SP-DMC-037A

23 Electric Motor 1 Hp, 110V, 60Hz, 110V Plug $205.00 SP-DMC-031D

24 Cable With Plug Call

25 Aluminum Engine Pulley Call

26 V Belt $7.50

27 8 x 25 MA screw Call

28 Motor Plate Call

29 Screw Belt Tensioner 8x50 MA Call

30 Machine Housing Call

31 Plastic Stoppers Call

32 Tree (Specify Painted Or S.S)

87


Grifo Grape Crusher / Grape Destemmer (Stand Type Type / DMC, DMCSI, DMCI) Parts-Continued

POS DESCRIPTION PRICE CODE

SP-DMC-016 Chain FOR DMA, DMC, DMCI, DMCSI, DMS $8.25

33 Large Roller Gear Call

34 Small Roller Gear Call

35 Roller Supports (Specify Painted Or S.S) Call

36 Left Roller 220mm $30.00

37 Right Roller 220mm $30.00

38 Torque Rolls Call

39 Destemmer Steel Shaft Pulley Call

40 Crown Gear $13.75

41 8 MA Cage Nut Call

42 Pinion Call

43 Bearing Support Holder $7.50

44 52 x 20 x 15 Bearing $7.50

46A Destemmer Shaft Painted Metal $62.00

46B Destemmer Shaft Stainless Steel $98.00


88


PVC Capsule Heat Shrink Applicator, Bench Model, 110 Volt Parts


1 Base Call

2 Cradle For Bottle Call

3 Bottle Call

4 External Protection Grate Call

5 Internal Protection Cover Call

6 Heating Coil $27.00

7 Hinge Pin For Cradle Call

8 Height Adjustment Slot Call

9 Cradle Call

10 On-Off Switch $27.50

11 Fuse $1.25

12 Cable With Plug Call

89


Zambelli - Large Floor Corker Parts

Replacement Nickel Jaws For Zambelli Large Floor Corker

(Comes in 4 Pieces-2 of each pictured below)

Cat. No.: RJZRLFC / Price: $36.00

Grifo - Italian Floor Corker Parts

Replacement Brass Jaws For Grifo Floor Corker (Comes in 4 Pieces)

Cat. No.: SP-TG-001 / Price: $21.00

90


Zambelli Hydro 20 to 80 (Water) Press Parts (specify model when ordering). POS DESCRIPTION PRICE

1 AIR RELIEF VALVE, 1/4” GAS $12.50

2 LOCKING CRANK CALL

3 COVER CALL

4 TOP LOCKNUT IN S.S. CALL

5 WASHER IN S.S. CALL

6 GROMMET CALL

7 TOP FLANGE 1 CALL

8 TOP FLANGE 2 CALL

9 MEMBRANE See pg. 72

10 GROMMET CALL


12 CAGE CALL

13 CENTRAL SHAFT CALL


16 LOWER FLANGE CALL

17 COLLECTING BASE CALL

18 LOWER LOCKNUT IN S.S. CALL

19 FF ELBOW CALL

20 CONNECTING DISTANCE PIPE CALL

21 LEG BOLT CALL

22 PRESSURE GAUGE $31.50

23 EMPYTING TAP CALL

24 CONNECTING BLOCK CALL

25 SAFETY VALVE CALL

26 FAST CONNECTION SWIFT CALL

27 GASKET FOR FAST CONNECTION CALL

28 FAST CONNECTION FOR HOSE NIPPLE CALL

29 SUPPORTING LEG CALL

30 RUBBER CAP FOR SUPPORTING LEG CALL

Position 1-Air Relief Valve, 1/4” GAS. Zambelli hydro presses

sizes 20 through 80 all take a 1/4” GAS air relief valve.

A 1/4” GAS measures 13.15 mm (.51”) diameter for the male

threaded part of the valve.

Hydro 20 /40 Locking Crank (Position #2) / Cat. No.: ZHLC20-40 / Price: $40.50

Hydro 80 /160 Locking Crank (Position #2), (Zambelli Code 1188R00165)/ Cat. No.: ZHLC80-160 / Price: $44.00

*Note:

• The locking crank for the Hydro 20 and Hydro 40 are the same. The hole on the top cover that the central shaft goes through

measures 20 cm for both a Hydro 20 and 40. The threaded central shaft for the Hydro 20/40 is size M20 which is a metric meas-

urement.

• The locking crank for the Hydro 80 is larger. The Hydro 80 and Hydro 160 use the same locking crank. The threaded central shaft

for the Hydro 80/160 is size M24.

91


Zambelli Hydro 20 to 80 (Water) Press Parts (specify model when ordering).

Nylon Internal Sack (Recommended) For Zambelli Hydro Models (Water Presses)

Nylon Internal Sack For 20 Liter Water Press (Approximately 21.5” H x 18” W laying flat) / Price: $42.00

Nylon Internal Sack For 40 Liter Water Press (Approximately 26.5” H x 23.5” W laying flat) / Price: $46.00

Nylon Internal Sack For 80 Liter Water Press (Approximately 30” H x 30” W laying flat) / Price: $58.00

Plastic External Cover (Recommended) For Zambelli Hydro Models (Water Presses)

Plastic External Cover For 20 Liter Water Press / Price: $19.00



Replacement Bladder (Membrane) For Zambelli Hydro Models

Replacement Bladder (Recommended) For 20 Liter Water Press / Price: $138.00



Diagram For 20 Liter Bladder



92


Marchisio Ratchet Press Parts

Important: specify model and cage diameter when ordering replacement parts.

Cat.# Description Cage Ø (cm) Price

00012489 Ratchet Pins For Ø 20 Press 20 $12.50








Ratchet Pins (Pawls), Set Of Two, For Wooden & Stainless Steel Ratchet Presses

Wooden Blocks, Set Of Six, For Wooden & Stainless Steel Ratchet Presses


00012366 Wooden Blocks For Ø 20 Press 20 $15.00









MLP20 Locking Pins For Ø 20 Press 20 $20.00








Cage Locking Pins, Set, For Wooden & Stainless Steel Ratchet Presses

93


Marchisio Ratchet Press Parts-Continued

Important: specify model and cage diameter when ordering replacement parts.

Pair Of Half Moons, Set, For Wooden & Stainless Steel Ratchet Presses


00012351 Pair Of Half Moons For Ø 20 Press 20 $22.50








Complete And Threaded Ratcheting Mechanism, For Wooden & Stainless Steel Ratchet Presses


00012421 Complete And Threaded Ratcheting Mechanism For Ø 20 Press 20 $162.00








94


Marchisio Electric Pump Bronze / Model 20 Type EEM20 Parts


8 Counter flange Gasket $4.50

12 O-Ring $7.50

13 Impellor (Bronze) $16.25

25 Straight Fitting $18.75

26 Curved Fitting $18.75

67 Seal $6.25

68 Motor Seal $6.25

Straight Fitting

Curved Fitting

Bronze Impeller

Complete rebuild kit for Marchisio Electric

Pump Bronze / Model 20 Type EEM20

Includes:

Part#8: Counter Flange Gasket

Part #12: O-Ring

Part #67: Seal

Part#68: Motor Seal

Price: $24.50

95


Zambelli Tifone T-12 Pump Without By Pass (FLANGED)- Parts

Rebuild Kit For Zambelli Tifone T-12, Without By-Pass (Includes All Part Listed Below), Impeller Not Included

Part # T.12 02 - Clip For Zambelli Tifone T-12, Without By-Pass

Part # T.12 03A - Seal For Zambelli Tifone T-12, Without By-Pass

Part # T.12 03B - Seal For Zambelli Tifone T-12, Without By-Pass

Part # T.12 06 - Gasket For Zambelli Tifone T-12, Without By-Pass

Part # T.12 06 - Gasket For Zambelli Tifone T-12, Without By-Pass

Cat. No.: 1188R00027 / Price: $27.50

Replacement Impeller For Zambelli Tifone Pump Model T-12, Without By-Pass, Part # T12 10

(Referenced Above In Diagram), Con Mozzo (With Hub), Neoprene (EPDM) For Wine

Cat. No.: GN/12EPDM/CM/ Price: $65.00

Pump Model Diameter

Ø

Shaft

Ø

Impeller Depth

Of Rubber

Impeller Depth

Total

# Of

Fins

Material

T-12 55 11.5 30.2 53.2 8 EPDM

Dimensions For Zambelli Tifone Pump Impellers In mm

Impeller has

a steel hub.

96


Drip Pan

Reber Tomato Processor Parts- Specify model when ordering.

1 Electric Motor

2 Reduction Flange For 1.50 hp takes code 1014 L9 1014 L 1016 L

Reduction Gear Cover Gasket 1032 A 1041 A

3 Small Gear N. 3 Machine has gears 3 & 5 only 1025 A $4.75

4 Twin (Double) Gear 1020 SER $25.00

5 Gear With Hub N. 3 Machine has gears 3 & 5 only 1024 A $12.50

5a Reduction Gear Cap 1035 A (Red) or

1037 A (Black W Bleed)

1035 A (Red) or

1037 A (Black W Bleed)

6 Reduction Gear Cover 1015 L 1017 L

7 Pestle 2005 A 3003 A

8 Funnel 5000 N 5100 N $38.00 $32.00

9 Tomato Squeezer 2000 L 3000 L

10 Auger (Propeller) 2001 P 3001 P $28.00 $28.00

11 Filter Cone 5303 N 5503 N $32.00 $22.00

12 Drip Pan 5600 N 5700 N $35.25 $33.00

13 Coupling Pin With Spring 2002 MA 3005 MA

14 Gear Cover Seal Exterior 1027 A 1030 A $6.00 $4.50

15 Base 1051 MA 1052 MA

16 Splash Guard (not shown) 5603 L 5703 L $19.00 $14.00

Funnel Gasket 5005 A 5105 A

Hydraulic Oil 1073 A $11.50 1073 A $11.50

CODE

POS DESCRIPTION NOTES N. 5 Models N. 3 Model Price Price

CODE

Filter Cone

Funnel

Spray Guard

Auger

97


Premium Wine Grapes & Juice For Home Winemakers

Gino Pinto Inc. distributes a wide variety of grapes through our growers in California. California grapes are world-

renowned. Varieties of white grape that are available include: Albarino, Chardonnay, French Colombard, Gewurztramin-

er, Malvasia Bianca, Muscat Alexandria, Muscat Canelli, Sauvignon Blanc, Pinot Grigio, Riesling, Thompson Seedless,

and Viognier.

Reds include: Barbera, Black Malvasia, Cabernet Franc, Cabernet Sauvignon, Carignane, Grenache, Malbec, Merlot,

Mourvedre, Nebbiolo, Petite Syrah, Petite Verdot, Pinot Noir, Pinotage, Ruby Cabernet, Sangiovese, Syrah, Tempranillo,

and Zinfandel.

Also offered in the Fall are California and Italian varietal grape juice packed in 6 gallon buckets for winemakers who

want to avoid grape crushing and pressing.

California Wine Grapes & Juice (Available Each Fall)

Gino Pinto Inc. also sources grapes from the Curico Valley in Chile. Available Chilean fresh red grape varieties include:

Cabernet Franc, Cabernet Sauvignon, Merlot, Syrah, Malbec, Pinot Noir, Petite Verdot, and Carmenere. Available Chilean

fresh white grape varieties include: Chardonnay, Pinot Grigio, Sauvignon Blanc, and Viognier.

Chilean juices packed in 6 gallon buckets available in red are: Cabernet Franc, Cabernet Sauvignon, Cab./Merlot Blend,

Merlot, Syrah, Malbec, Pinot Noir, Petite Verdot, and Carmenere. Whites offered are Chardonnay, Muscat, Pinot Grigio,

Sauvignon Blanc, Riesling, and Viognier.

Chilean Wine Grapes & Juice (Available Each Spring)

South African Wine Grapes & Juice (Available Each Spring)

Gino Pinto Inc. imports grapes from the Breede River Valley (Pinotage) and Stellenbosch (Cabernet Sauvignon, Syrah,

and Barbera) areas of South Africa. These areas are in the Western Cape Region and are known for world class wine.

South African juice packed in 6 gallon buckets in red include: Barbera, Cabernet Sauvignon, Merlot, Pinotage, and Shi-

raz. Whites include: Chardonnay, Chenin Blanc, Pinto Grigio, Sauvignon Blanc, and Semillon.

98


Fruit Juice For Home Winemakers

Each Spring and Fall we offer “Natural Select” Fruit Juice for home winemaking in 6 gallon buckets.

Experiment with new flavors and unique blends. An ideal solution for winemakers looking to make fruit wines.

Perfect as a varietal or blending partner.

• 100% Natural Juice. 100% Natural Flavor

• 22° Brix base with acidity between .80% to 1.00%

• Complete and immediately ready to begin the fermentation process

• Prefiltered for predictable yield

Juices include: Apple, Blackberry, Blackcurrant, Blueberry, Cherry (Tart), Concord, Cranberry, Elderberry, Mango,

Dragon Fruit, Peach, Pear, Pineapple, Plum, Raspberry, and Strawberry.

gino pinto inc. 2020 home winemaking catalog · grifo grape crusher / grape destemmer (stand type /...

Documents