gildemeister nef ct 60 en - maschinen-kistner.de · 2015-12-10 · hydraulic three-jaw chuck ø 315...
TRANSCRIPT
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
GILDEMEISTER NEF CT 60
LIST OF CONTENTS
Machine info …………………………………………………….……………………………..………………………………………..…..……………….
Equipment ……………………………………………………………………………………………………..………………………………………….………
Technical data …………………………………………………………………………………..……………………………..….……………..………. Machine pictures …………………………………………………………………………………………………………………………….……….
Floor plan …………………………………………………………………………………………………………………..………………………………….…...
Transport data ……………………………………………………………………….…………………………………………………………..……….
3 4 5 7 9 11
GILDEMEISTER NEF CT 60 | | 2
2
MACHINE INFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
Distance between centers
GILDEMEISTER NEF CT 60 |
1x Hydraulic three-jaw chuck ø 315 mm
1x Hydraulic four-jaw chuck
1x Hydraulic two-jaw chuck
2x Steady rests 30-190 mm and 170-260 mm
1x Set VDI – tool holder
1x Chip conveyor
1x Set of tool holders incl. tools
Various sets of jaws
Operating manual / Documentation
Machine parameters on CD
| 4
EQUIPMENT
GILDEMEISTER NEF CT 60 |
| 5
TECHNISCHE DATEN
Turning diameter
Swing-ø over bed
Swing-ø over cross slide Bed
Height of centers over bed guideway
Bed width Slides
Slide lenght
Slide width
Transerval / longitudinal distance Spindle – clamping means
Spindle size, flat flange
Spindle bore
Chuck diameter
Spindle-ø in front bearing Drive
Drive power
Max. torque on the main spindle
Speed range, infinitely variable Feed
Z-feed screw-ø / slope
X-feed screw-ø / slope
Z-feed force 100% DC
X-feed force 100% DC
Z-rapid traverse / feed rate
X-rapid traverse / feed rate Tailstock
Tailstock, quill diameter
Tailstock, centre sleeve stroke
Tailstock pressure, max.
Tailstock, quill holder
GILDEMEISTER NEF CT 60 |
| 6
Turning lenght
Machine weight, net
Machine lenght x width x height
Revolver with auxiliary drive
12-slots turret with 6 driven tool holders and 6 for normal tool holders according to DIN 69880. This tool holder can also be mounted in the position for driven tools.
GILDEMEISTER NEF CT 60 |
MACHINE PICTURES
| 7 GILDEMEISTER NEF CT 60 |
| 8 GILDEMEISTER NEF CT 60 |
FLOOR PLAN
| 9 GILDEMEISTER NEF CT 60 |
| 10 GILDEMEISTER NEF CT 60 |
TRANSPORT DATA
| 11 GILDEMEISTER NEF CT 60 |
Thank you very much for your interest