gibidi - 2011/2012 catalogue
DESCRIPTION
2011/2012 GIBIDI general catalogueTRANSCRIPT
2011CREATIVE AUTOMATIONS CATALOGUE
A COLONAnd so, the colon in the discourse is the best way moment and then gives it the green light with more
to say that GI.BI.DI. wanted to pause for a drive and enthusiasm.
moment and reflect - on ourselves and our world - Because after the colon comes an empty page on
and we came to the conclusion that we wanted to which GI.BI.DI. intends to write its success story -
be even more GI.BI.DI. than before. all in the future (and as you can see, here there is
Because the colon pauses the discourse for a no full stop, precisely because it doesn't end here).
Not just a full stop.
It's trendy to exaggerate.
A colon, no less!
None of all this.
Exaggeration is not our style.
But modernisation is, and how.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
INSTALLOIOThe alphabet of GIBIDI becomes wealthy of a new paragraph:
the two points with a smile of satisfaction.
The translation is easy: the two points are the sign of the continuous movement of
GIBIDI research, always open to the future.
A “new paragraph” for which there are no full stop. Then comes the smile.
Without the two points, it would only stay alone a sad parenthesis; with the two
points, it shows the satisfaction of the GIBIDI' installers and, another reason for the
end user to choose GIBIDI. A smile that, obviously, displays the satisfaction
of GIBIDI’ installers knowing all its qualities.
The ones who are able to guarantee it to their customers, so that they will be
well happy to also recommend GIBIDI, its two points, and the radiant smile
of their installers.
AJ00470Shimmed pinion147 mm/s Z = 16 M 4
20
PASS
sliding gates
PASS1220
PASS1230
PASS1240
PASS1820
PASS1830
PASS1840
PASS2500
Foundation plate not included
95012...936
36
36
36
36
36
36
560
560
560
560
560
560
560
1
92512...91
92512A...91
95018...91
95518...91
95518A...91
940251380 VAC three-phase without control unit
1
1
1
1
1
1
1
* 102For the technical specifications of the control units see page
Accessories
Reversible PASS kit
EN
EN
AJ91112/34 m drawn steel rack C40, M4 (30x12) galvanised and perforated (over 600 Kg), complete with 12 spacer pins (price by the metre)
Recommended control unit:61000 (F1/T - only for 94025)See page 98
A90812PPair of magnets for additional limit switches for SL and PASS
AJ92190Foundation plate for SL and PASS
AJ00290In the event of a power failure or by means of an emergency control, it automatically releases the motor making it reversible for “manual” opening of the gate.Irreversibility is restored when the power is restored
AJ00580Fast pinion160 mm/sZ = 18 M 4
AJ00910“L” support to be weldedfor limit switch magnets
CodePieces
per pallet KgPackage
Pieces
With SC230 control unit*, deceleration and anti-crushing functions
With SC230 control unit*, deceleration and anti-crushing functions
Without control unit
Without control unit
With SC230 control unit*
With SC230 control unit*
17
SL 400 - 800 KIT30 4201
30
30
30
30
420
420
420
420
1
1
1
1
30 4201
30 4201
30 4201
30 4201
30 4201
Kit SL 430
Kit SL 830
Kit SL 430
Kit SL 830
Kit SL 440
Kit SL 840
Kit SL 440
Kit SL 840
Kit SL 844
Kit SL 844
K431/08/Z1
K831/08/Z1
K431/08/F1
K831/08/F1
K440/08/F1
K840/08/F1
K440/08/Z1
K840/08/Z1
K844/08/F1
K844/08/Z1
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1A
1C
1A
1C
1B
1D
1B
1D
1E
1E
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
6
6
6
6
1x
1x
1x
1x
1x
1x
1x
1x
1x
5
5
5
6
6
6
6
6
6
7
7
7
7
7
Complete flashlight Radio receiver board
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF 180
AJ75800Warning plate
76542 3
2
1
2
666
5
EN
EN
EN
EN
EN
EN
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
4 guide to reading
Name of product or series
Pieces per package
Pieces per pallet
Pallet weight
Product identification label for the kits
Product name
Product code
Some simple advice and tips for easy reading of the 2010 price list
The kit contents correspond to the products indicated with the numbered label
A word on key encoding(see page 5)
Product EN 12453 ready
5
IMPORTANT NOTE
GI.BI.DI. uses cylinders with standard European Profile key on all its key selectors, electric locks and operator unlocking devices. This novelty allows
integrating all the keys usable on your automated system into one single key; you can even use the same key for your entrance door and pedestrian gate
(first check the brand and model you have).
This is possible because of the 10 key encoding codes available (01/02/03/04/05/06/07/08/09/10).
HOW TO ORDER?
It's dead easy! Step 1: Decide which encoding code you want to use, for example 03.
Step 2: Decide which devices you want to install and integrate, for example, a key selector and a 12 VDC electric lock.
Step 3: Find the code of the device you want to purchase, for example, the DCS100 selector (AU01940) and a 12 VDC electric lock (AJ000612).
To place the order, just indicate the encoding code next to the product code, for example:
AU01940/03 - 1 key selector DCS100
AJ000612 - 1 12 VDC electric lock
AJ00650/03 - 1 half-cylinder encoded with 3 keys
CAUTION!
The electric locks are supplied without cylinder and keys, so remember to also order the specific cylinder together with the electric lock.
In all cases where the encoding code is not indicated, or a generic one is requested, GI.BI.DI. will provide the most available one. You can also choose this
option for all the automation kits that include key selectors. All the products where personalised encoding can be requested will be marked with a symbol in
the price list (orange with an image of a key).
Make sure that you indicate the key encoding code after the product code!
personalised key
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
6 technologies
REVERSE
H2O-FREE
REVERSE is a well-tried mechanical technology GI.BI.DI. has been using for over 30 years.
REVERSE allows constructing hydraulic actuators without lock, making manual emergency
manoeuvres much easier. All this thanks to the special control valves integrated in a hydraulic
distribution system which sends the oil directly to the tank.
With REVERSE manual emergency manoeuvres are guaranteed!
H2O-FREE is an exclusive GI.BI.DI. technology for hydraulic systems which guarantees
reliability over time. H2O-FREE is a special vacuum system for actuators providing perfect
operator seal.
This technology allows making all our products to the highest quality standards.
The advantages of the H2O-FREE technology can be seen even after many years;
the vacuum system prevents air heat exchange and hence possible formation of condensate
with the result that the hydraulic efficiency of the actuators is guaranteed over time.
With H2O-FREE everything is ready and controlled for extended used.
DRIVE-BY
EASYLOG
MANAGER
The new DRIVE-BY technology allows easier control of all the aspects of automation.
Thanks to DRIVE-BY the exact position of the automated device with respect to the gateway
can be determined using simple inductive and/or mechanical sensors. With DRIVE-BY the
automated device configuration remains stable over time and in any atmospheric condition.
The new standardisation protocol of the GI.BI.DI. electronic control systems allows very easily
and quickly making the connections and testing the systems. EASYLOG also facilitates access
to the entire range of GI.BI.DI. electronic products In fact, thanks to EASYLOG, it will be even
easier to use any GI.BI.DI. product, since the operating logic, adjustments and test systems
have been standardised and simplified.
With EASYLOG it is a piece of cake to adapt the automation system to your needs!
This is the new standard protocol for programming and managing devices. It allows the user to
customize and manage the installations, but above all to make them exclusive to the installer.
The utilisation of the software for PC allows the user to create a complete database of all the
installations.
Thanks to MANAGER it will also be possible to increase the security level of the whole system.
A solution offered to carry out professional installations of the highest level that can be easily managed.
7product index
SLIDING GATES
SWING GATES
ROLLING SHUTTERS
OVERHEAD AND SECTIONAL DOORS
BARRIERS
CONTROL UNITS
RISING BOLLARDS
ACCESSORIES
8
22
62
48
68
90
76
110
page
page
page
page
page
page
page
page
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
SL
PASS
Irreversible electromechanical gearmotors for sliding gates
Irreversible electromechanical gearmotors for sliding gates
10
18
page
page
SLIDING GATES
GUIDE TO SELECTION
Sliding gates Electromechanical
Residential use
Heavy use
Maximum weight800 Kg
SL800
Maximum weight1,200 Kg
PASS
Maximum weight1,800 Kg
PASS
Maximum weight2,500 Kg
PASS
Maximum weight400 Kg
Maximum weight500 Kg
Maximum weight300 Kg
SL400
SL300
SL200
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
8
10
Kg
0 100 200 300 400 500
2
4
6
m
SL 200 - 300
torque regulation
Technical data
maximum leaf weight
speed
maximum torque
nominal torque
use
operating temperature
power absorbed
degree of protection
frequency of use
thermal switch
operator weight
type of oil
cancelli scorrevoli
heavy
SL344
500 Kg
100W
IP55
-20°C +60°C
-
6 Nm
12 Nm
ALBIDA EP2 grease
8 Kg
90%
24 Vdc
200 mm/s - Z = 16 M 4
electronic
Application diagram
SL 244 SL 344
Dimensions
motor power supply
residential
SL244
300 Kg
100W
IP55
-20°C +60°C
-
6 Nm
9 Nm
ALBIDA EP2 grease
7 Kg
50%
24 Vdc
150 mm/s - Z = 16 M 4
electronic
200 mm
27
1 m
m
322 mm
415 mm
415 mm
10 sliding gates
speed regulation YESYES
11
SL 200 - 300Irreversible
electromechanical
gearmotors
for sliding gates
The newest range of electromechanical motors for For people who want to open and close their gate
sliding gates of small and medium size (from fast, this is the right choice. Thanks to the built-in
300 to 500 Kg), suitable for residential use. control unit SC24, it is possible to adjust force and
Extremely easy to install, with the possibility of speed of movement easily, including deceleration
adjustments on the horizontal and vertical axis. in opening and closing.
Gears are manufactured completely in steel and It is also possible to install the optional battery kit
bronze making them silent and reliable over time. directly to the motor to allow the gate opening and
Moreover the technology in the 24 Vdc system closing even in the event of a power cut.
allow’s the user to obtain the highest level of SL: technology, practicality and design in a single
safety, as provided in the EN 12453 standards. product!
Battery kit(optional)
Mechanical parts made ofsteel and bronze-aluminium
Unlocking device
Embeddedcontrol unit
Die-cast aluminiumstructure
Led batterystatus message
Hall-effect sensorsto read limit switch magnets
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
cancelli scorrevoli12 sliding gates
CodePieces
per pallet KgPackage
Pieces
Accessories
SL344
Foundation plate not included
With SC24 control unit*, deceleration and anti-crushing functions 97404...430 26011B EN
SL244 With SC24 control unit*, deceleration and anti-crushing functions1A EN
AJ91112/34 m drawn steel rack C40, M4 (30x12) galvanised and perforated(over 600 Kg), complete with 12 spacer pins (price by the metre)
AJ91111Rack (V6) in Nylon fibre with steel core and module 4 fastening slot (leafs up to 600 Kg - by the metre)
SL 200 - 300
* 103For the technical specifications of the control unit see page
AJ00605Battery case to be fitted on the gearmotor
AJ92190Foundation plate for SL and PASS
A90702PSpare key for SL unlocking device
AJ0060624 V battery charger boardfor AJ00605 - See page 104
AJ00600Unlocking device withpersonalised key.Ask for key encoding.
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00910“L” support to be weldedfor limit switch magnets
97204...430 2501
13
Pieces per pallet
PackagePieces
SL 200 - 300 KITCodeKg
Complete flashlight Radio receiver board
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF 180
AJ75800Warning plate
76542 3
As well as the operators the kit contains:1
2
1
2
666
5
30 3051
30 3051
Kit SL 244
Kit SL 244
K244/08/F1
K244/08/Z1
1x
1x
1x 1x
1x
1x
1x
1x 1x
1x
1x1A
1A
2 3
3
4
4
5 6
6
7 EN
EN
30
30
335
335
1
1
Kit SL 344
Kit SL 344
K344/08/F1
K344/08/Z1
1x
1x
1x 1x
1x
1x
1x
1x1B
1B
2 3
3
4
4
1x 1x
1x
5 6
6
7 EN
EN
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
ALBIDA EP2 grease
Kg
0 200 400 600 800 1000
2
4
6
8
10
m
14 sliding gates
SL 400 - 800residential heavy heavy
SL420 / 430 / 440 SL820 / 830 / 840 SL824 / 844
400 Kg 800 Kg 800 Kg
300W 300W 100W
IP55 IP55 IP55
-20°C +60°C -20°C +60°C -20°C +60°C
110°C 140°C -
10 Nm
8 Nm
22 Nm
15 Nm
12 Nm
6 Nm
ATF Dextron III ATF Dextron III
11 Kg 11 Kg 11 Kg
30% 60% 90%
230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc
147 mm/s - Z = 16 M 4 147 mm/s - Z = 16 M 4 147 mm/s - Z = 16 M 4
electronic electronic electronic
Application diagram
SL420/430/440 SL 820/830/840/824/844
Dimensions
322 mm 200 mm
27
1 m
m
10
0 m
m
torque regulation
Technical data
maximum leaf weight
speed
maximum torque
nominal torque
use
operating temperature
power absorbed
degree of protection
frequency of use
thermal switch
operator weight
type of oil
motor power supply
speed regulation - - YES
15
SL 400 - 800Irreversible
electromechanical
gearmotors
for sliding gates
A complete range of 24 VDC and 230 VAC EN 12453 standards, and for the 24 VDC versions
gearmotors for gates of small and medium size it is even easier.
and weight (from 400 Kg to 800 Kg) suitable for The heat-treated steel reduction gear of the SL800
residential or condominium use, with or without series is in oil bath making it silent and reliable
control unit. over time.
The versions with control unit incorporated The unlocking device for manual manoeuvres is
(equipped with all the dedicated inputs for the easy to access and also available in the version
safety devices) are fast and easy to install and with European Profile personalised key (optional).
allow regulating deceleration during opening and For the 24 VDC version you can also install the
closing and the anti-crushing force and thresholds. optional battery kit, which allows opening and
It is hence easy to adapt the system to meet the closing also in the event of a blackout.
Mechanical partsmade of steel
Unlocking device (also available with optional European Profile cylinder)
Die-cast aluminium structure
Gears and motor in oil bath
Optional battery charger cover
Hall-effect sensorsto read limit switch magnets
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
16
SL 400 - 800
* 102 and 103For the technical specifications of the control units see pages
SL420
SL844
SL430
SL440
SL820
SL830
SL840
SL824
Foundation plate not included
With SC230 control unit*, deceleration and anti-crushing functions
With SC230 control unit*, deceleration and anti-crushing functions
Without control unit
Without control unit
With SC230 control unit*
With SC230 control unit*
Without control unit
With SC24 control unit*, deceleration and anti-crushing functions
96004...930 3501
96408...430 3501
96504...930 3501
96404...930 3501
96008...930 3501
96508...930 3501
96408...930 3501
96008...430 3501
1A
1B
1C
1D
1E
sliding gates
Accessories
EN
EN
EN
AJ91112/34 m drawn steel rack C40, M4 (30x12) galvanised and perforated (over 600 Kg), complete with 12 spacer pins (price by the metre)
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00605Battery case to be fitted on the gearmotor
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ00608
AJ00860 - See page 10524 V battery charger boardfor
AJ0060624 V battery charger boardfor AJ00605 - See page 104
AJ91111Rack (V6) in Nylon fibre with steel core and module 4 fastening slot (leafs up to 600 Kg - by the metre)
AJ00480Shimmed pinion147 mm/s Z = 16 M 4
AJ92190Foundation plate for SL and PASS
A90812PPair of magnets for additional limit switches for SL and PASS
A90702PSpare key for SL unlocking device
AJ00600Unlocking device withpersonalised key.Ask for key encoding.
AJ00590
160 mm/sZ = 18 M 4
Fast pinionAJ00910“L” support to be weldedfor limit switch magnets
CodePieces
per pallet KgPackage
Pieces
17
SL 400 - 800 KIT30 4201
30
30
30
30
420
420
420
420
1
1
1
1
30 4201
30 4201
30 4201
30 4201
30 4201
Kit SL 430
Kit SL 830
Kit SL 430
Kit SL 830
Kit SL 440
Kit SL 840
Kit SL 440
Kit SL 840
Kit SL 844
Kit SL 844
K431/08/Z1
K831/08/Z1
K431/08/F1
K831/08/F1
K440/08/F1
K840/08/F1
K440/08/Z1
K840/08/Z1
K844/08/F1
K844/08/Z1
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1A
1C
1A
1C
1B
1D
1B
1D
1E
1E
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
6
6
6
6
1x
1x
1x
1x
1x
1x
1x
1x
1x
5
5
5
6
6
6
6
6
6
7
7
7
7
7
Complete flashlight Radio receiver board
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF 180
AJ75800Warning plate
76542 3
2
1
2
666
5
EN
EN
EN
EN
EN
EN
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Kg
0 1200 1400 1600 1800 2000 2200 2400 2600
8
10
12
14
16
18
20
m
18 sliding gates
PASSheavy heavy heavy
PASS1220 / 1230 / 1240 PASS1820 / 1830 / 1840 PASS2500
1,200 Kg
-
1,800 Kg
-
2,500 Kg
-
700W 700W 750W
IP55 IP55 IP55
-20°C +60°C -20°C +60°C -20°C +60°C
140°C 140°C 140°C
50 Nm
30 Nm
60 Nm
40 Nm
90 Nm
70 Nm
ARNICA 68 ARNICA 68 ARNICA 68
15 Kg 15 Kg 15 Kg
90% 60% 70%
230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 380 Vac/three-phase
147 mm/s - Z = 16 M 4 147 mm/s - Z = 16 M 4 147 mm/s - Z = 16 M 4
mechanical/electronic mechanical/electronic mechanical
Application diagram
PASS1220/30/40 PASS1820/30/40 PASS2500
Dimensions
29
4 m
m140 mm
240 mm
10
0 m
m
64
,5 m
m
246 mm
316 mm
torque regulation
Technical data
maximum leaf weight
speed
maximum torque
nominal torque
use
operating temperature
power absorbed
degree of protection
frequency of use
thermal switch
operator weight
type of oil
motor power supply
speed regulation
19
PASSA complete range of 230 VAC and 380 VAC three- EN 12453 standards.
phase gearmotors for gates of large size and weight The reduction gear with heat-treated steel gears
(from 1,200 Kg to 2,500 Kg) suitable for heavy use, and the double-plate clutch are in oil bath making it
with or without control unit. silent and reliable over time.
The versions with control unit incorporated The unlocking device for manual manoeuvres is
(equipped with all the dedicated inputs for the safety easy to access and comes with a personalised key.
devices) are fast and easy to install and allow The kit for automatic reversibility in the event of an
regulating deceleration during opening and closing emergency can be installed on these models (as
and the anti-crushing force and thresholds. required by the safety standards for area
It is hence easy to adapt the system to meet the evacuation).
Irreversible
electromechanical
gearmotors
for sliding gates
Gears and double-plate clutch in oil bath
Mechanical parts made of heat-treated steeland ductile cast iron
Die-cast aluminium structureUnlocking device with personalised key
Hall-effect sensorsto read limit switch magnets
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
AJ00470Shimmed pinion147 mm/s Z = 16 M 4
20
PASS
sliding gates
PASS1220
PASS1230
PASS1240
PASS1820
PASS1830
PASS1840
PASS2500
Foundation plate not included
95012...936
36
36
36
36
36
36
560
560
560
560
560
560
560
1
92512...91
92512A...91
95018...91
95518...91
95518A...91
940251380 VAC three-phase without control unit
1
1
1
1
1
1
1
* 102For the technical specifications of the control units see page
Accessories
Reversible PASS kit
EN
EN
AJ91112/34 m drawn steel rack C40, M4 (30x12) galvanised and perforated (over 600 Kg), complete with 12 spacer pins (price by the metre)
Recommended control unit:61000 (F1/T - only for 94025)See page 98
A90812PPair of magnets for additional limit switches for SL and PASS
AJ92190Foundation plate for SL and PASS
AJ00290In the event of a power failure or by means of an emergency control, it automatically releases the motor making it reversible for “manual” opening of the gate.Irreversibility is restored when the power is restored
AJ00580Fast pinion160 mm/sZ = 18 M 4
AJ00910“L” support to be weldedfor limit switch magnets
CodePieces
per pallet KgPackage
Pieces
With SC230 control unit*, deceleration and anti-crushing functions
With SC230 control unit*, deceleration and anti-crushing functions
Without control unit
Without control unit
With SC230 control unit*
With SC230 control unit*
21
PASSInstallation example
Gearmotor See page 20
1 6542 3
AU02700Plastic flashlight covers
AU02710Board + lamp
AU02000Pair of wall-mounted photocellsDCF180
AU01940Wall-mounted key selectorDCS100
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU029102-channel receiver board
AJ91112/3
20RackSee page
7
2
1
2
66
5
7
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
BL230
BL240
TOP
ART
FLOOR
GROUND
28
24
32
36
44
40
page
page
page
page
page
page
SWING GATES
230 Vac linear electromechanical operators for swing gates
24 Vdc linear electromechanical operators for swing gates
230 Vac linear hydraulic operators for swing gates
230 Vac and 24 Vdc electromechanical operators with articulated arm for swing gates
230 Vac and 24 Vdc underground hydraulic operators for swing gates
230 Vac and 24 Vdc underground electromechanical operators for swing gates
GUIDE TO SELECTION
Swing gates
Hydraulic
Residential use
Residential use
Heavy use
Leaves up to 3,5 mLinear TOP
Leaves up to 3 mUnderground FLOOR
Leaves up to 6 mLinear TOP
Leaves up to 3 m
Leaves up to 3,5 m
Angular
Underground
ART
GROUND
Angular
Underground
Linear Leaves up to 3,5 m BL240
Leaves up to 3 m
Leaves up to 3,5 m
ART
GROUND
BL230Leaves up to 5 m
Leaves up to 3,5 m BL240
Linear
Heavy use
Electromechanical
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Kg
0 100 200 300 400
1
2
3
4
5
m
24 swing gates
BL240
limit switch
Technical data
maximum thrust force
nominal force
rod speed
irreversible automated devices
maximum rod stroke
use heavy
BL240
operating temperature
power absorbed
degree of protection
frequency of use
maximum leaf length
thermal switch
2000 N
1200 N
100W
IP44
3.5 m *
-20°C +60°C
-
320 mm
operator weight
YES
8.2 Kg
40%
24 Vdc
20 mm/s
2 - opening and closing limit switches
motor power supply
Application diagram
Recommended application Application limit
Installation positions
C1C DBAß
109 x 151BL240 140120110° 730 90
109 x 151BL240 140140100° 730 90
109 x 151
109 x 151
BL240
BL240
150
125
150
140
90°
90°
731
725
100
100
Dimensions
C
C1
A
d1 D ≥
90
B > 60+d1 for β = 90° B ≥ 140 for β = 110°
Electric lock
85
mm
7
8 m
m
897 mm
10
9 m
m
740 mm
15
1 m
m
* ** by proper control unit: BA24
in case of application on panelled / hollow-core leaves or longer than 2,5 m, we suggest the use of an electric lock
force regulation
speed regulation
electronic
YES **
25
Adjustable opening and closing double-reading electrical limit switches
Body in anodised aluminium
Emergency unlocking device
Lead nut in bronze-aluminium
Mechanicallimit stops
Protected worm screwin rolled steel
Max. stroke 320 mm
BL240 is the electromechanical operator in 24 Vdc The operator is equipped with opening and closing
with a solid structure, its absolute irreversibility limit switches, that can be easily adjusted and
assures locking of gate leaves up to 2,5 m, mechanical stops, allowing a very good control of
without using the electric lock. the anti – crushing and deceleration to conform to
The gears, the worm screw and the lead nut are the EN12453 standards. The unlocking device for
made of high resistance materials to give quiet the manual opening and closing of the gate is
operation and durability. easy to use.
Irreversible linear
electromechanical
operator for swing gates
BL240
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ0060824 V battery charger boardfor AJ00860 - See page 105
AJ00511Foundation plate to be welded
26 swing gates
BL240BL2401 2 opening and closing limit switches 1540050 4101
Recommended control unitAccessories
For 1 or 2 motorsAS05590 (BA24)See page 95
EN
CodePieces
per pallet KgPackage
Pieces
12 Vdc 128
Electric lockSee page
27
BL240 KIT
7
3
2
6
7
1
7
1
7
Kit BL240
Kit BL240
15 2751
15 2751 K240/08/Z1
K240/08/F12x
2x
1x
1x
1x 1x
1x
1x
1x
1x 1x
1x
1
1
2
2
3 4
4
5
5
6 7
7
1x 8
87653 42
AJ75800Warning plate
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF180
AS05590BA24 control unit Complete flashlight Radio receiver board
EN
EN
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
28 swing gates
BL230heavy heavy
BL230
3000 N
2200 N
200W
IP53
3.5 m *
-20°C +60°C
140°C
380 mm
YES YES
11 Kg
40%
230 Vac - 50/60 Hz
16 mm/s
2 - opening and closing limit switches 2 - opening and closing limit switches
Application diagram
Recommended application
Installation positions Dimensions
Electric lock
* in case of application on panelled / hollow-core leaves or longer than 2,5 m, we suggest the use of an electric lock** by proper control unit: BA230
electronic electronic
limit switch
Technical data
maximum thrust force
nominal force
rod speed
irreversible automated devices
maximum rod stroke
use
operating temperature
power absorbed
degree of protection
frequency of use
maximum leaf length
thermal switch
operator weight
motor power supply
force regulation
speed regulation YES ** YES **
C1C DBAß
139 X 197
139 X 197
139 X 197
BL230
BL233
BL233
BL233
200
240
200
220
240
180
90°
90°
110°
860
872
870
139 X 19718018090° 740 120
150
150
120
BL230
139 X 197150130110° 740 90
139 x 197BL230 16017090° 740 120
C
B
A D
C1 841 mm
19
7 m
m
77
mm
13
9 m
m
70
mm
761 mm (C)
961 mm
19
7 m
m
77
mm
13
9 m
m
70
mm
max 841 mm (C)
BL230
Kg
0 100 200 300 500400
1
2
3
4
5
m
BL230
Kg
0 100 200 300 500400
1
2
3
4
5
m
BL233 BL233
Application limit
230 Vac - 50/60 Hz
3000 N
2200 N
200W
IP53
5 m *
-20°C +60°C
140°C
500 mm
11,3 Kg
40%
16 mm/s
BL233
29
BL230
Unlocking device with European Profile personalised key
Adjustable opening and closing limit switches
Body in anodised aluminium
Lead nut in bronze-aluminium and worm screw in rolled steel
Maximum stroke 500 mm
Preassembled cable
BL230 is a 230 VAC electromechanical operator and lead nut in bronze-aluminium guarantee
with a solid structure designed to automate large absolutely silent operation and a long life. Easy
or blind doors (excellent wind resistance) for electrical connections thanks to the prewired
condominium use. cable, including easy-to-adjust opening and closing
The absolute irreversibility assures and guarantees limit switches.
locking leaves of up to 2.5 m without the use of an The unlocking device for manual manoeuvres with
electric lock. European Profile personalised key is easy to
The steel gears with worm screw in rolled steel access and use.
Irreversible linear
electromechanical
operator for swing gates
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
For 1 motorAS05060 (BA 100)See page 94
For 1 or 2 motors
See page AS04180 (F4 PLUS)
92
For 1 or 2 motorsAS05580 (BA 230)See page 93
12 Vdc 128
Electric lockSee page
AJ00511Foundation plate to be welded
30 swing gates
BL230BL2301 2 opening and closing limit switches - Stroke 380 mm
2 opening and closing limit switches - Stroke 500 mm
1320012 1321
Recommended control unitsAccessories
CodePieces
per pallet KgPackage
Pieces
135 13300121BL233
31
BL230 KIT
7
3
2
6
7
1
7
1
7
Kit BL230
Kit BL230
Kit BL230
Kit BL230
9
9
231
231
1
1
9
9
231
231
1
1
K232/08/Z1
K236/09/Z1
K232/08/F1
K236/09/F1
2x
2x
2x
2x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1
1
1
1
2A
2B
2A
2B
3
3
4
4
4
4
5
5
5
5
6
6
7
7
7
7
1x
1x
8
8
AJ75800Warning plate
8
7653 42A 2B
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF180
AS04180F4 PLUS control unit
AS05580BA 230 control unit Complete flashlight Radio receiver board
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Kg
0 100 200 300 400 500 600
1
2
3
4
5
6
m
291 391
441
32 swing gates
TOPresidential heavy heavy residential heavy heavy
TOP291 TOP391 TOP441 TOP291/S TOP391/S TOP441/S
3000 N
2500 N
4500 N
3000 N
4500 N
3000 N
2200 N
1500 N
3000 N
2200 N
3000 N
2200 N
170W 190W 190W 170W 190W 190W
IP65 IP65 IP65 IP65 IP65 IP65
3.5 m * 4.5 m * 6.0 m * 3.5 m * 4.5 m * 6.0 m *
-20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C
100°C 100°C 100°C 100°C 100°C 100°C
290 mm 290 mm 440 mm 290 mm 290 mm 440 mm
7.7 Kg 8.7 Kg 10 Kg 7.7 Kg 8.7 Kg 10 Kg
30% 50% 50% 30% 55% 55%
230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz
10 mm/s 10 mm/s 10 mm/s 20 mm/s 20 mm/s 20 mm/s
hydraulic
YES **
hydraulic
YES **
hydraulic
YES **
hydraulic
YES **
hydraulic
YES **
hydraulic
YES **
Application diagram
TOP291 TOP391 TOP441 = BAC Limit
Installation positions
C1C D CuBAß
90 x 90
90 x 90
90 x 90
90 x 90
TOP391
TOP391
TOP441
TOP441
130
110
205
175
130
110
205
175
90°
110°
90°
110°
950
950
1.235
1.235
100
95
115
110
260
260
410
410
81 x 81TOP291 110110110° 900 95 260
81 x 81TOP291 13013090° 900 100 260
C
C1
Cu
DF
F>80mm
E>55mm
B
AE
ß
Dimensions
910 mm
81 x
81 m
m
67 x
67 m
mTOP 291
960 mm
90 x
90 m
m
67 x
67 m
mTOP 391
1.250 mm
90 x
90 m
m
67 x
67 m
mTOP 441
Electric lock
* in case of application on panelled / hollow-core leaves or longer than 2,5 m, we suggest the use of an electric lock** by proper control unit: BA230
operator weight
Technical data
maximum thrust force
nominal force
rod speed
maximum rod stroke
use
operating temperature
power absorbed
degree of protection
frequency of use
maximum leaf length
thermal switch
motor power supply
force regulation
speed regulation
33
TOP
Emergency unlocking device
Body in drawn anodised aluminium
Force adjusting valves
Coupling bracket with ball joint
Stainless steel tie-rods
The TOP series range is suitable for any type of EN 12453 standards.
installation and for both residential and heavy use The models are available in three versions: Always
for leaves up to 6 m. The streamlined design and Released (SLAC): in manual manoeuvres the leaf
absolutely silent operation make the operator is not slowed down by the presence of the piston.
suitable for any type of gate. Always Locked (BAC): the piston assures excellent
The vacuum hydraulic circuit prevents air heat hold and can be released simply by acting on the
exchange and hence possible formation of unlocking device, also available with European
condensate, thus guaranteeing hydraulic efficiency Profile personalised key (optional).
of the piston over time. Always released during opening and always locked
The opening and closing force can be regulated by during closing (SLA-BA): ideal for large leafs
means of the overpressure valves for the highest where locking when opened is required (wind
level of safety against crushing as required by the resistance).
Linear
hydraulic operators
for swing gates
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Recommended control units:AS04180 (F4 PLUS)AS05580 (BA 230)AS05060 (BA 100)See pages 92 - 93 - 94
34 swing gates
TOPTOP291
TOP291/S
TOP291
TOP291/S
TOP291
TOP291/S
TOP391
TOP391/S
TOP391
TOP391/S
TOP391
TOP391/S
TOP441
TOP441/S
TOP441
TOP441/S
TOP441
TOP441/S
29200
29200/S
29201
29201/S
29204
29204/S
39200
39200/S
39201
39201/S
39204
39204/S
44200
44200/S
44201
44201/S
44204
44204/S
1 20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
174
174
174
174
174
174
194
194
194
194
194
194
220
220
220
220
220
220
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BACSLACSLA/BA
=
=
Always Locked during opening and closingAlways Released during opening and closingAlways Released during opening/Locked Open
=
Accessories
AJ00490Unlocking device with personalised key. Ask for key encoding.
AJ00500Rear fastening plate for TOP391 - 441
AJ00510
TOP291Rear fastening plate for
AJ00520
TOP291 - 391 - 441Front bracket fastening plate for
AJ00560Adaptation kit to change from MODO position to TOP position
BAC, leafs up to 2.0 m
BAC, leafs up to 2.0 m, fast version
SLAC, leafs up to 3.5 m
SLAC, leafs up to 3.5 m, fast version
SLA/BA, leafs up to 3.5 m
SLA/BA, leafs up to 3.5 m, fast version
BAC, leafs up to 2.0 m
BAC, leafs up to 2.0 m, fast version
SLAC, leafs up to 4.5 m
SLAC, leafs up to 4.5 m, fast version
SLA/BA, leafs up to 4.5 m
SLA/BA, leafs up to 4.5 m, fast version
BAC, leafs up to 2.5 m
BAC, leafs up to 2.5 m, fast version
SLAC, leafs up to 6.0 m
SLAC, leafs up to 6.0 m, fast version
SLA/BA, leafs up to 6.0 m
SLA/BA, leafs up to 6.0 m, fast version
*
*
*
*
*
*
*
*
*
*
*
*
* The SLAC and SLA/BA versions require use of an electric lock
CodePieces
per pallet KgPackage
Pieces
12 Vdc 128
Electric lockSee page
35
TOP KIT
7
3
2
6
7
1
7
1
7
Kit TOP291
Kit TOP291
Kit TOP291
Kit TOP291
20
20
340
340
1
1
20
20
340
340
1
1
K291/08/Z1
K292/09/Z1
K291/08/F1
K292/09/F1
2x
2x
2x
2x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1
1
1
1
2A
2B
2A
2B
3
3
4
4
4
4
5
5
5
5
6
6
7
7
7
7
1x
1x
8
8
AJ75800Warning plate
8
7653 42A 2B
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
AU02000Pair of wall-mounted photocellsDCF180
AS04180F4 PLUS control unit
AS05580BA 230 control unit Complete flashlight Radio receiver board
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Kg
0 100 200 300 400
1
2
3
4
5
m
36
ART
swing gates
Application diagram
Recommended application Application limit
residential
ART5000
200W
IP53
3 m *
-20°C +60°C
140°C
250 Nm
200 Nm
11.1 Kg
30%
230 Vac - 50/60 Hz
7.8°/s
2 - opening and closing
YES
heavy
ART5024
100W
IP53
3 m *
-20°C +60°C
-
250 Nm
200 Nm
11.1 Kg
40%
24 Vdc
5.6°/s
2 - opening and closing
YES
Installation positions and Dimensions
709mm
100m
m
135m
m
315mm 589mm 135 315mm 170
40m
m
135m
m90° 130°75mm
20m
m
Electric lock
* in case of application on panelled / hollow-core leaves or longer than 2,5 m, we suggest the use of an electric lock** by proper control unit: BA230 for ART5000, BA24 for ART5024
electronic
YES **
electronic
YES **
Technical data
shaft rotation speed
maximum torque
use
power absorbed
degree of protection
frequency of use
motor power supply
limit switch
nominal torque
irreversible automated devices
operating temperature
maximum leaf length
thermal switch
operator weight
torque regulation
speed regulation
37
ART
Unlocking device
Built-in opening and closing double-reading limit switches
Articulated arm in die-cast aluminium
The ART series allows installation also in particular wall mounting the device with the key selector
conditions, for example, where there are large function).
pillars. In the 24 Vdc version it can be integrated with the
The special fastening plate makes installation fast optional battery kit which allows opening and
and easy. closing the gate even in the event of a blackout,
ART incorporates the opening and closing limit as well as achieving the highest level of safety
switches and the unlocking device for emergency against crushing as required by the EN 12453
manoeuvres (an accessory is also available for standards.
Electromechanical
operators
with articulated
arm for swing gates
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
38
ART
swing gates
Accessories
ART5024
Articulated arm not included
30524With opening and closing limit switches 30 3381
ART5000 30510With opening and closing limit switches 30 33811A
1B
Recommend control unitsfor ART 5000:AS04180 (F4 PLUS)AS05580 (BA 230)AS05060 (BA 100)See pages 92 - 93 - 94
Recommend control unitfor ART 5024:AS05590 (BA 24)See page 95
Electric lock12 Vdc (ART5000)24 Vdc (ART5024)See page 128
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ00608
for AJ00860 - See page 10524 V battery charger board
AJ50139Long reinforced articulated arm for large pillars (600 x 540 mm)
AJ30900Articulated arm 425 x 460 mm
AJ00311ART external unlocking device kit, also with key selector function
EN
CodePieces
per pallet KgPackage
Pieces
39
ART 5000 KIT
1 1 8
88
8
7
4
3 32
Kit ART5000
Kit ART5000
Kit ART5000
Kit ART5000
K351/08/F1
K351/08/Z1
K355/09/F1
K355/09/Z1
12 5261
12 5261
12 5261
12 5261
2x
2x
2x
2x
1x
1x
1x
1x
2x
2x
2x
2x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1A
1A
1A
1A
2A
2A
2C
2C
3
3
3
3
4
4
5
5
5
5
6
6
6
6
7
7
1x
1x
1x
1x
1x
1x
8
8
8
8
9
9
2A
98
AU02000Pair of wall-mounted photocellsDCF180
AJ75800Warning plate
AU01940Wall-mounted key selectorDCS100
7
23 64 52B 2C
AS05580 (per ART 5000)BA 230 control unit
AS04180F4 PLUS control unit
(per ART 5000) AS05590 (per ART 5024)BA 24 control unit
AJ30900Articulated arms
AU03000DOMINO radio controlDTS4334 - 433 MHzComplete flashlight Radio receiver board
Kit ART5024
Kit ART5024
K354/08/F1
K354/08/Z1
12 5261
12 5261
2x
2x
2x
2x
1x 1x
1x
1x
1x
1x1B
1B
3
3
4 5
5
6
6
7 1x
1x
1x8
8
9
1x
1x
2B
2B
EN
EN
Pieces per pallet
PackagePieces CodeKg
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Kg
0 100 200 300 400
1
2
3
4
5
m
500 600
40 swing gates
GROUND
Application diagram Installation positions
GROUND 624 GROUND 610
180 m
m 85 m
m
4 51 m m
4 0 m4 m
345 m m
360m m
200 m
m
~ 400 mm
0~ 50
mm
Ø 3 mm5
* in case of application on panelled / hollow-core leaves or longer than 2,5 m, we suggest the use of an electric lock** by proper control unit: BA230 for GROUND610, BA24 for GROUND624
Electric lock
Technical data
use
power absorbed
degree of protection
frequency of use
maximum leaf length
thermal switch
maximum leaf weight
operator weight
operating temperature
maximum torque
nominal torque
leaf rotation speed
maximum leaf rotation
motor power supply
residential heavy
GROUND610 GROUND624
400W 150W
IP67 IP67
3.5 m * 3.5 m *
150°C -
600 Kg 600 Kg
12 Kg 12 Kg
30% 40%
230 Vac - 50/60 Hz 24 Vdc
-20°C +60°C -20°C +60°C
600 Nm 450 Nm
400 Nm 300 Nm
7°/s 7°/s
135° 135°
torque regulation electronic electronic
speed regulation YES ** YES **
The electromechanical underground operator is GROUND is equipped with a new emergency
available either in the 24Vdc or 230Vac, for the unlocking device with personalized key and
automation of gates up to 3,5 m. With the European profile cylinder; it allows the user also to
adjustable built-in limit switches it is possible to obtain openings up to 135°, making it a unique
manage the deceleration easily and with the safety product in its field.
devices install a system that complies with the EN Strong, simple, reliable, but above all: GIBIDI.
12453 standards.
41
GROUNDUnderground
electromechanical
operator
for swing gates
Mechanical parts made ofsteel, bronze-aluminiumand ductile cast iron
Structure in die-cast aluminium
Unlocking device with European profile cylinder
Built-in adjustable double-reading
limit switches with hall-effect sensors
Maximum leaf rotation 135°
Unlocking handle
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ0060824 V battery charger boardfor AJ00860 - See page 105
42 swing gates
GROUNDGROUND 610 200101A
GROUND 624 200241B
35 4201
35 4201
230 Vac operator with limit switches
24 Vdc operator with limit switches
Electric lock12 Vdc (GROUND610)24 Vdc (GROUND624)See page 128
Accessories
Recommend control unitsfor GROUND 610:AS05580 (BA 230)AS05060 (BA 100)See pages 93 - 94
Recommend control unitfor per GROUND 624:AS05590 (BA 24)See page 95
Lever and rod groups not included
AJ49100Self-supporting foundation box in steel, with cataphoresis finish,cover included (16 pcs. per pallet, 240 Kg)
AJ00740Rod group with outlet shaft lever
AJ00720Right external release levers group
AJ00730Left external release levers group
AJ00680Double European profile cylinder for unlocking GROUND
EN
AJ00730
External
Internal
AJ0072090°
AJ00730
External
Internal
AJ00720
90°/135°
CodePieces
per pallet KgPackage
Pieces
43
GROUND KIT
2 3
1110
4
9
7 86
The Kit is delivered in separate packages
1
2
5
6
1
2
4 43 3
9
10 10
Code
Kit GROUND610
Kit GROUND624
Kit GROUND610
Kit GROUND624
K610/08/Z1
K624/08/Z1
K610/08/F1
K624/08/F1
2x
2x
2x
2x
2x
2x
2x
2x
1x
1x
1x
1x
2x
2x
2x
2x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1A
1B
1A
1B
2
2
2
2
3
3
3
3
4
4
4
4
5A
5B
5A
5B
6
6
7
7
7
7
1x 1x 1x 1x
1x 1x
1x 1x
1x 1x 1x 1x
8 9 10 11
8 10
8 10
8 9 10 11
AS05590(for GROUND 624)BA 24 control unit
AJ00740Rod group with outlet shaft lever
AJ49100Self-supporting foundation box in in steel, with cataphoresis finish
AU03000DOMINO radio controlDTS4334 - 433 MHzComplete flashlight Radio receiver board
AJ00720Right external release levers group with personalized cylinderAJ00730Left external release levers group with personalized cylinder
AS05580(for GROUND 610)BA 230 control unit
5B5A
AU02000Pair of wall-mounted photocellsDCF180
AU01940Wall-mounted key selectorDCS100
AJ75800Warning plate
EN
EN
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
44 swing gates
FLOOR
Application diagram
ø 40 mmcables
ø 70 mm pin
ø 60-80 mm drainage
22
9m
m
19
8m
m
413mm 328mm
Installation positions
Electric lock
* In case of application on panelled / hollow-core leaves or longer than 2,0 m, we suggest the use of an electric lock
Technical data
use
power absorbed
degree of protection
frequency of use
maximum leaf length
thermal switch
maximum leaf weight
operator weight
operating temperature
maximum torque
nominal torque
leaf rotation speed
maximum leaf rotation
motor power supply
torque regulation
speed regulation
EN
heavy heavy
FLOOR830
190W
IP67
3,0 m * 3,0 m *
100°C
600 Kg
15 Kg
40%
230 Vac - 50/60 Hz
-20°C +60°C
300 Nm
220 Nm
7°/s
180°
hydraulic
YES
FLOOR824
80%
120W
IP67
300 Nm
220 Nm
hydraulic
YES
7°/s
180°
-20°C +60°C
100°C -
600 Kg
15 Kg
24 Vdc
Kg.
mt.
FLOOR 830-824 = BAC Limit
0 100 200 300 400
1
2
3
4
5
500 600
45
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
FLOOR, available either in the 230Vac You can also adjust the opening and closing
(FLOOR830) or 24Vdc (FLOOR824), is installed speed, and use the Hall effect limit switches
underground so that it is invisible and does not (optional).
alter the gate aesthetics. For every model you The unlocking device for emergency manoeuvres
have only one version that allows opening the leaf in the event of a blackout is easy to access and
up to 180°. The new GIBIDI technology allows can be used either on the inside or outside
making the operator reversible or irreversible with of the gate.
a little few manoeuvres. The overpressure valves The foundation box, with self-lubricating bushing is
for force regulation during opening and closing, fully self-supporting and allows installing the
and the 24Vdc technology, allow achieving the operator without having to remove the leaf
highest level of safety against crushing, as from the gate.
required by the EN 12453 standards.
Underground
hydraulic
operator
for swing gates
FLOOR
Optional limit switches
Unlockingdevice
6 tension rods in steel
Body and cylinderin anodised aluminium
New device forreversibility selection
Speedregulatingvalves
Output shaftin treated steel
Practical and fast fastening
Forceregulating
valves
New capfor unlockingdevice access
New fixing systemfor cover
46 swing gates
FLOOR
Accessories
CodePieces
per palletPackage
Pieces Kg
FLOOR 830 813001A
FLOOR 824 81324
30 4701
30 4701
230 Vac operator*
24 Vdc operator*1B
* Locked or reversible selectable on the operator
Recommended control units for FLOOR 830:
AS04180(F4 PLUS)
Recommended control units for FLOOR 824:
AS05590(BA24)
AS05580(BA 230)
AS05060(BA 100)
AJ49000Self-supporting foundation box in black cataphoresisCover included (24 pieces per pallet, 356 Kg)
AJ00550Stainless steel cover forfoundation box
AJ0061212 Vdc electric lock
AJ0062424 Vdc electric lock
AJ01400Limit switches
AJ01410Limit switch adaptator forAJ01400 for F4 plus and BA 100
AJ75800Warning plate
AU02000Pair of wall-mounted photocellsDCF180
AU01940Wall-mounted key selectorDCS100
47
FLOOR KITCode
As well as the operators the kit contains:1
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
The kit is delivered in separate packages
Kit FLOOR830
Kit FLOOR830 K800/08/Z1
K800/08/F12x
2x
2x
2x
1x
1x
1x 1x
1x
1x
1x
1x1A
1A
2
2
4A
4A
5
4
6
6
7
7
8 1x 1x
1x
9 10
9
Kit FLOOR824
Kit FLOOR824 K824/08/Z1
K824/08/F12x
2x
2x
2x
1x
1x
1x 1x
1x
1x
1x
1x1B
1B
2
2
4B
4B
5
4
6
6
7
7
8 1x 1x
1x
9 10
9
2x
2x
3
3
2 75 64A 4B3
98 10
1
2 3
1
23
5
4
8
9 9
AJ49000Self-supporting foundationbox in black cataphoresis
AU03000DOMINO radio controlDTS4334 - 433 MHzComplete flashlight Radio receiver board
AS04180 (for FLOOR 830)F4 PLUS control unit
AS05590 (for FLOOR 824)BA 24 control unit
AJ01400Limit switches
GECO LUX
AUTOBOX
MODO500
Automated drive unit for overhead and sectional doors
Irreversible electromechanical operators for counterweight overhead doors
Hydraulic operators for counterweight overhead doors
50
54
58
page
page
page
OVERHEAD AND SECTIONAL DOORS
GUIDE TO SELECTION
Sectional doors
Overhead doors
Electromechanical
Hydraulic
LinearResidential useElectromechanical
Heavy use
Heavy use
Linear
Angular
Angular
Maximum210 m door
GECO LUX
2Maximum 7 m doorAngular AUTOBOX
2Maximum 7 m door
Maximum210 m door
AUTOBOX
MODO500
GECO LUX
Residential use
Maximum210 m door
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
50
GECO LUXTechnical data
use residential residential
GECO60 GECO80
maximum thrust
nominal thrust
600 N
500 N
800 N
700 N
power absorbed 80W 80W
degree of protection IP40 IP40
operating temperature -10°C +55°C -10°C +55°C
operator weight 19.1 Kg 19.1 Kg
frequency of use 30% 30%
built-in courtesy light YES - 40W YES - 40W
door width 3.5 m 4.5 m
door height 2.4 m 2.4 m
automatic closing YES YES
maximum speed 16 mm/s 12 mm/s
deceleration functions YES YES
maximum stroke 2,800 mm 2,800 mm
Application diagram
GECO 60 LUX GECO 80 LUX
door width (m)
door
hei
ght (
m)
0 1 2 3 4 5
1
2
3
Dimensions
3.560 mm
20
0 m
m
114
,5 m
m
2.800 mm
290 mm
40
mm
24 Vdc 24 Vdcmotor power supply
thrust regulation electronic electronic
overhead doors sectional doors
51
GECO LUXDesigned for easy installation on sectional or The unlocking device for emergency manoeuvres
overhead doors, this automated device allows is incorporated and can be connected to the door
achieving high movement speed with deceleration handle.
during opening and closing. The optional battery kit allows opening and closing
40W courtesy light incorporated and electronically the door even in the event of a blackout.
controllable anti-crushing safety device to achieve
a high level of safety as required by the EN 12453
standards.
Automated
drive unit
for overhead
and sectional doors
Adjustable opening and closing limit switches
Electronics incorporated
40W courtesy light
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
52
GECO LUXKIT GECO 60 K020/08/F11 The kit includes: 1 GECO LUX 60 electromechanical automated device for
overhead and sectional doors, including an electronic control unit, 433 MHz receiver, 1 Rolling Code remote control and accessories for fastening to the door Arm for counterweight overhead doors (AJ00303) not included
The kit includes: 1 GECO LUX 80 electromechanical automated device for overhead and sectional doors, including an electronic control unit, 433 MHz receiver, 1 Rolling Code remote control and accessories for fastening to the doorArm for counterweight overhead doors (AJ00303) not included
* Pallet dimensions: 170 x 80 cm
24 478*1
KIT GECO 80 K030/08/F11 24 478*1
For the technical specifications of the control unit see page 106
Accessories
AJ00303Arm for counterweight doors
AJ00301Extension kit for railL = 1000 mm
AJ00300External unlocking device kit for GECO
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ00863Battery charger cable kit
overhead doors sectional doors
CodePieces
per palletPackage
Pieces Kg
53
GECO LUX
1
2
35
4
5
1 2
AU02700Plastic flashlight covers
3
AU02724Board + lamp
AJ00303 Arm for counterweight overhead doors
54
AU02000Pair of wall-mounted photocellsDCF 180
AU01940Wall-mounted key selectorDCS100
GearmotorSee page 52
Installation example for counterweight overhead door
AU03000DOMINO radio controlDTS4334 - 433 MHzincluded in the kit
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
54
AUTOBOX
built-in courtesy light
Technical data
maximum torque
nominal torque
leaf rotation speed
limit switch
use residential heavy
AUTOBOX3000 AUTOBOX3024
operating temperature
power absorbed
degree of protection
frequency of use
maximum leaf surface
thermal switch
250 Nm
200 Nm
250 Nm
200 Nm
200W 100W
IP40 IP40
27 m 27 m
-20°C +60°C -20°C +60°C
140°C -
operator weight
2 - opening and closing 2 - opening and closing
8.6 Kg 8.6 Kg
30% 40%
230 Vac - 50/60 Hz 24 Vdc
7.8°/s 5.6°/s
YES YES
126 mm
32
5 m
m
110 mm
50
mm
Single-motor application
Application diagram
2m
0 1 2 3 4 5 6 7
1
2
3
4
door
wid
th (
m)
AUTOBOX 3024 AUTOBOX 3000
Dimensions
motor power supply
torque regulation electronic electronic
counterweight overhead doors
55
AUTOBOX
Courtesy light
Body in anodised aluminium
Gears in steel and bronze-aluminium
Unlocking device
Built-in opening and closing double-reading limit switches
The ideal product for counterweight overhead Thanks to the wide range of control units,
doors for both residential and condominium use. the force and deceleration during opening
Elegant and compact, easy to install, equipped and closing can be regulated to achieve the
with courtesy light and opening and closing limit highest level of safety against crushing as
switches integrated. required by the EN 12453 standards.
The new reinforced mechanics makes it extremely It is even easier for the 24 VDC version on which
robust, silent and reliable over time. Unlocking the optional battery kit can be installed, which
device for emergency manoeuvres integrated with allows opening and closing the door even in the
possibility of connecting it to the door handle. event of a blackout.
Irreversible
electromechanical
operators for
counterweight
overhead doors
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
56
AUTOBOXAUTOBOX 3000
AUTOBOX 3024
2 opening and closing limit switches
2 opening and closing limit switches
50300
50300...4
1
1
30
30
278
278
1
1
Recommended control unit for AUTOBOX 3000:AS05060 (BA 100)See page 94
Recommended control unit for AUTOBOX 3024:AS05030 (BSC 24)See page 96
Accessories
AJ00370Installation kit for 1 motor with straight armSide member 2000 mm
AJ00380Installation kit for 2 motorswith straight armSide member 2000 mm
AJ00391Installation kit for 1 motor with curved armSide member 2000 mm
AJ00401Installation kit for 2 motors with curved armSide member 2000 mm
AJ00861Unlocking device kit for manual manoeuvres from the outside
AJ009001 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00860IP55 case for batteries and boards complete with battery fastening brackets
AJ0060824 V battery charger boardfor AJ00860 - See page 105
EN
counterweight overhead doors
CodePieces
per palletPackage
Pieces Kg
57
AUTOBOXInstallation example
2
88
1
7
4
3
87
AU02000Pair of wall-mounted photocellsDCF 180
AU01940Wall-mounted key selectorDCS100
1
Recommended control unit for AUTOBOX 3000:AS05060 (BA 100)See page 94
2 2
Installation kitSee page 56
3
Recommended control unit for AUTOBOX 3024:AS05030 (BSC 24)See page 96
OperatorSee page 56
64 5
AU02700Plastic flashlight covers
AU02710 / AU02724Board + lamp
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU029102-channel receiver board
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
58
MODO500Technical data
use heavy
MODO500
power absorbed
degree of protection
frequency of use
thermal switch
200W
IP55
100°C
operator weight 12 Kg
40%
230 Vac - 50/60 Hz
operating temperature -20°C +60 C
maximum torque
nominal torque
leaf rotation speed
maximum leaf rotation
torque regulation
maximum leaf surface
320 Nm
220 Nm
9°/s
190°
hydraulic
210 m
195 mm
90 mm
40
5 m
m
90 mm
DimensionsApplication diagram
2m
0 2 4 6 8 10 12
1
2
3
4
5
door
leng
th (
m)
MODO500
motor power supply
counterweight overhead doors
59
MODO500
Heat-treated steel propeller shaft
Unlocking device for emergency manoeuvres
Force adjusting valves
Body in anodised aluminium
The conventional hydraulic operator for residential device for emergency manoeuvres incorporated.
and condominium overhead doors. A complete, silent and reliable operator MODO500
Heat-treated steel propeller shaft for a longer life, is the right choice for a special installation
overpressure valves for force regulation, unlocking
Hydraulic operator
for counterweight
overhead doors
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
BACSLAC
= Always Locked during opening and closingAlways Released during opening and closing=
60
MODO500MODO 500 500011
MODO 500 500021
24
24
1
1
2BAC, 10 mmaximum surface
SLAC, maximum surface 2 10 m
308
308*
* The SLAC version requires the use of an electric lock
12 Vdc 128
Electric lockSee page
Recommended control unit:AS05060 (BA 100)See page 94
AJ0001Installation kit for 1 motorwith straight arm and one pair of side members - height 2.5 m
AJ00041Installation kit for 2 motors with curved arm and two pairs of side members - height 2.5 m
AJ00031Installation kit for 1 motor with curved arm and one pair of side members - height 2.5 m
AJ0002Installation kit for 2 motors with straight arm and two pairs of side members - height 2.5 m
Accessories
counterweight overhead doors
CodePieces
per palletPackage
Pieces Kg
61
MODO500
2
88
1
7
4
3
Installation example
8
AU02000Pair of wall-mounted photocellsDCF180
2 31 764 5
Recommended control unit:AS05060 (BA 100)See page 94
Installation kitSee page 60
GearmotorSee page 60
AU02700Plastic flashlight covers
AU02710Board + lamp
AU01940Wall-mounted key selectorDCS100
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU029102-channel receiver board
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
ROLLING SHUTTERS
MPS64pageCentral gearmotors for rolling shutters
GUIDE TO SELECTION
Lifting power 120 kg
Shutters Electromechanical Residential use
MPS120
Lifting power 160 kg MPS160
Lifting power 180 kg MPS240
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
64 gearmotors for rolling shutters
MPS230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz
MPS 120 MPS 160 MPS 240
200/220 mm 200/220 mm 240 mm
4 min 4 min 4 min
460 W 630 W 630 W
120 Kg 160Kg 180 Kg
7 Kg 8 Kg 9 Kg
60 mm 60 mm 76 mm
120 Nm 155 Nm 210 Nm
5/6 5/6 5/6
2.2 A 2.7A 2.7 A
10 10 8
absorbed current
tube rolling
motor power supply
lifting power
power absorbed
limit switch range
thermal cut out
Technical data
motor torque
operator weight
no. RPM
ring gear
230 Vac - 50/60 Hz
MPS 120E
200/220 mm
4 min
460 W
120 Kg
8 Kg
60 mm
110 Nm
5/6
2.2 A
10
230 Vac - 50/60 Hz
MPS 160E
200/220 mm
4 min
630 W
160Kg
9 Kg
60 mm
145 Nm
5/6
2.7A
10
230 Vac - 50/60 Hz
MPS 240E
240 mm
4 min
630 W
180 Kg
10 Kg
76 mm
200 Nm
5/6
2.7 A
8
electro-brake NO YES NO YES NO YES
MPS 120 MPS 160 MPS 240
330 mm
350 mm
Ø6
0 m
m
Ø2
00
mm
330 mm
380 mm
Ø6
0 m
m
Ø2
00
mm
330 mm
380 mm
Ø7
6 m
m
Ø2
40
mm
Dimensions
65
MPS
Mechanical partsmade of steel
Structure in aluminium
Adjustable built-inlimit switches
A series of central gearmotors for rolling shutters The electro - brake kit can be easily installed.
with built-in limit switch. The operator is totally built in aluminium die-cast
Power and reliability in one product. with the gear body made of steel.
Central gearmotors
for rolling shutters
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
66 gearmotors for rolling shutters
MPS
MPS240
MPS16040 3451
22 2231
MPS12040 3051* 230 Vac gearmotor for 120 kg shutters, with limit switches, ring gear Ø 200 mm, tube Ø 60 mm
MPS 240
MPS 160
MPS 120
* 230 Vac gearmotor for 160 kg shutters, with limit switches, ring gear Ø 200 mm, tube Ø 60 mm
230 Vac gearmotor for 180 kg shutters, with limit switches, ring gear Ø 240 mm, tube Ø 76 mm
* Box includes: no.1 adapter Ø 220 mm, no.1 pipe Ø 42 mm, no.1 pipe Ø 48 mm and 4 m of electric cable.
MPS240E
MPS160E40 3851
22 2451
MPS120E40 3451* 230 Vac gearmotor for 120 kg shutters, with limit switches and electro-brake, ring gear Ø 200 mm, tube Ø 60 mm
MPS 240E
MPS 160E
MPS 120E
* 230 Vac gearmotor for 160 kg shutters, with limit switches and electro-brake, ring gear Ø 200 mm, tube Ø 60 mm
230 Vac gearmotor for 180 kg shutters, with limit switches and electro-brake, ring gear Ø 240 mm, tube Ø 76 mm
Accessories
KEF01Electro-brake kit with manual release device forMPS120 - MPS 160 - MPS240
SBC01Armoured aluminium box to be built-in with lock, push button and electro-brake release device
SBC04Armoured box for wall mounting with electro-brake release device and personalised key selector
SBC02Aluminium box to be built-in with lock, push button, alarm input switch and electro-brake release device
SBC03Aluminium key selector for wall mounting with electro-brake release device
AS05190Control unit with built-in radio receiver
1
1
1
1
1
1
Recommended control unit
€CodePieces
per palletPackage
Pieces Kg
284,00
201,00
193,00
326,00
244,00
239,00
AU03000DOMINO radio controlDTS4334 - 433 MHz
AS05190Control unit with built-in radio receiver
67
MPSExample of rolling shutter installation
1 2 3
AU02700Plastic flashlight covers
AU02720Board + lamp
5 64
AU02000Pair of wall-mounted photocellsDCF180
Selector / Electro-brakeunlocking deviceSee page 66
GearmotorSee page 66
1
23
5
4
5
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
BARRIERS
Electromechanical barriers 70page
BARR500
GUIDE TO SELECTION
Barriers
Heavy use
Residential useElectromechanical
Electromechanical
BARR526
Max boom leanght 6 m
Max boom leanght 3 m
Max boom leanght 3 m
BARR524
BARR524
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
70 electromechanical barriers
BARR500Technical data
limit switch
use heavy
BARR524
operating temperature
maximum power absorbed
degree of protection
frequency of use
thermal switch
150W
IP55
-20°C +60°C
-
operator weight
2 - opening and closing
45 Kg
50%
24 Vdc
torque regulation
rod length
opening time
2,00/6,00 m
5 s
anti-crushing safety device
electronic
YES ( )with conductive edge
motor power supply
heavy
BARR526
200W
IP55
-20°C +60°C
-
2 - opening and closing
45 Kg
60%
24 Vdc
2,00/3,00 m
1,8 s
electronic
YES ( )with conductive edge
The BARR500 are supplied in the right version.To modify the version and balancing, see the instructions booklet.
Dimensions
355 mm
140 mm
850
mm
1220
mm
1117
mm
210 mm
325 mm
L 2000 ÷
= 6000 mm
71
BARR500Electromechanical barriers The new 24 V electromechanical automatic possibility to install conductive edges and
barriers, for heavy use, for the easy management signalling lights for an easy adaptation to
of aluminium booms up to 6 m with high opening EN 12453 standards.
speed. With a modern design and new technological
Deceleration during opening and closing, solutions, BARR500 is GIBIDI new proposal.
Steel treated with cataphoresis
Led signallinglights setting
Incandescentsignalling lights setting
Boom in anodized aluminium
Security device setting
Control unitcase
Release deviceeasy to use
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
72 electromechanical barriers
BARR500
BARR 544 11524D-S.2C1 8 375124 Vdc with control unit BR 24 EN
BARR 546 11524VD-S.2C8 375124 Vdc with control unit BR 24, fast version EN
BARR 524 11524D-S.21 8 360124 Vdc without control unit EN1
1
BARR 526 11524VD-S.28 360124 Vdc without control unit, fast version EN1
Boom accessories Dimensions 100x66
AB13000Boom 100x66x2290 mm.in aluminium. L=2m.red adhesive stripsand caps provided
AB13010Boom 100x66x3290 mm.in aluminium. L=3m.red adhesive stripsand caps provided
AB13020Boom 100x66x4290 mm.in aluminium. L=4m.red adhesive stripsand caps provided
AB13030Boom 100x66x6000 mm.in aluminium. L=5,7m.red adhesive stripsand caps provided
AJ01130Kit for articulated boom.Boom dimensions 100x66 mm.It is not advisable to use it with the fast version
AJ01310Boom joint 100x66 mm
AJ01050Pendulum articulated support for 100x66 mm boomTo use with code AJ01140
AJ01140Joint cover complete of boom cap. It is recommended for the installation of lights and edge
AJ01160Kit lights for boom 3 m,with connector and cap.To use with code AJ01140
AJ01180Kit lights for boom 6 m,with connector and cap.To use with code AJ01140
AJ01270Kit 8K2 edge for boom 2 m.To use with code AJ01140
AJ01280Kit 8K2 edge for boom 3 m.To use with code AJ01140
AJ01290Kit 8K2 edge for boom 4 m.To use with code AJ01140
AJ01300Kit 8K2 edge for boom 6 m.To use with code AJ01140
AJ01150Kit lights for boom 2 m,with connector and cap.To use with code AJ01140
AJ01170Kit lights for boom 4 m,with connector and cap.To use with code AJ01140
CodePieces
per pallet KgPackage
Pieces
Boom joint not included.
Balancing spring not included (see page 74).
73
BARR500
Common Accessories
Boom Accessories Dimensions 80x40
AB13040Boom 80x40x2290 mmin aluminium. L=2m red adesive strips provided
AB13050Boom 80x40x3290 mmin aluminium. L=3m red adesive strips provided
AB13060Boom 80x40x4290 mmin aluminium. L=4m red adesive strips provided
AB13070Boom 80x40x6290 mmin aluminium. L=6m red adesive strips provided
AJ01010Boom joint 80x40 mm
AJ01260Painted pendulum. Articulated support for boom 80x40 mm
AJ009001 1,9 Ah battery (12 V)2 batteries are required for 24 V
AJ0060824 V battery charger for AJ00860 - See page 105
AJ00860IP55 case for batteriesand boards, complete of battery fastening brackets
AJ01060Flashing light groupincluding a LED 24 Vdc flashing light card
AJ01100Kit for fastening other accessories
AJ01040Foundation plate
AJ01030Unloking device withpersonalised key Ask for key encoding.
AJ01080Fan for the case of the barrier control unit
AJ01020Painted fork supportfor both types of boom
11106Movable aluminium rack2 meter module.It is not advisable to use itwith the fast version
VEGACamera for platesreading systemSee page 130
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
74
BARR500
OPTIONALS AVAILABLE FOR BOOM OUTLINE 100x66 mm
OPTIONALS AVAILABLE FOR BOOM OUTLINE 80x40 mm
Boom lenght (m)
Boom lenght (m)
3
3
3.5
3.5
4
4
4.5
4.5
5
5
5.5
5.5
6
6
2
2
2.5
2.5
Choice of the Spring
Type of Spring
Code
Boom
Boom Lights+
Boom Edge+
Boom Edge Lights+ +
Boom End Foot+
Boom End Foot Lights+ +
Boom End Foot Edge+ +
Boom End Foot Edge Lights+ + +
Boom Rack +
Boom Rack Lights+ +
Boom Rack End Foot + +
Boom Rack End Foot Lights+ + +
Articulated boom
Articulated boom Lights +
Articulated boom Edge +
Articulated boom Edge Lights + +
Articulated boom End Foot +
Articulated boom End Foot Lights + +
Articulated boom End Foot Edge Lights + + +
Boom Edge+
Boom End Foot+ Edge +
Boom Rack +
Boom End Foot+
Boom Rack End Foot+ +
Boom
electromechanical barriers
A B C D E F
AJ01210
1400N 3100N 4300N 5700N 7400N 8500N
AJ01220 AJ01230 AJ01240 AJ01250 AJ01330
E
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B B
B
B
B
B
B
B
B
B
BB
B
BB
CC
C
C
C
C
C
C
D
D
D
DD
DD
DD
E
E
E
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BB
B
B
B
B
B
B
B
B
B
B
B
B
B
B
BB
B
B
BB
BB
B
B
B
B
B
B
B
B
B
B
B
B
BB
C
CC
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
DD
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
EE
E
F
FF
F
F
F
F
F
EE
E
E
E
EE
E
EE
E
EE
E
75
Installation example
BARR500
18
3
25
7
8
4
21 2 221
AJ01140Joint cover complete of boom cap
BarrierSee page 72
AJ01310Boom joint 100x66 mm
Lights for boom 100x66See page 72
Bom for barrier 100x66See page 72
Spring for boom 100x66Balancing spring for boom,see page 74
Boom supports 100x66See pages 72-73
4 87655
AJ01040Foundation plate
AU02000Pair of synchronized photocellsDCF180
AU01940Wall-mounted key selectorDCS100
AU03000DOMINO transmitterDTS4334 - 433 MHz
AU029102 Ch receiver
AJ01060Flashing light groupcomplete of a LED 24 Vdc flashing light card
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
3
RISING BOLLARDS
TOUCHE 100
TOUCHE 200
230 Vac hydraulic automatic rising bollards
230 Vac hydraulic automatic rising bollards
78
84
page
page
GUIDE TO SELECTION
Rising bollards Heavy useHydraulic
Ø 275 mm
Ø 120 mm
TOUCHE200
TOUCHE100
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
78 hydraulic rising bollards
TOUCHE 100Technical data
degree of protection
use heavy
TOUCHE120
resistance to breaking
operating pressure
power absorbed
resistance to impact without deformation
frequency of use
opening time
600W
2000 J
25000 J
10 bar
operator weight
IP67
176 Kg
40%
230 Vac - 50/60 Hz
cylinder thickness
closing time
cylinder stroke 700 mm
operating temperature
10 mm
-20°C +60°C
motor power supply
10 s
15 s
heavy
600W
2000 J
25000 J
10 bar
7 s
IP67
130 Kg
40%
230 Vac - 50/60 Hz
11 s
500 mm
10 mm
-20°C +60°C
TOUCHE122
Dimensions
460 mm
660 mm
Ø 400 mm
7 m
m
Ø 127 mm
thickness 10 mm
TOU
CH
E 1
20 =
700
mm
TOU
CH
E 1
22 =
500
mm
TOU
CH
E 1
20 =
128
5 m
mTO
UC
HE
122
= 1
085
mm
TOU
CH
E 1
20 =
198
5 m
mTO
UC
HE
122
= 1
585
mm
Ø 420 mm
Ø 350 mm
Ø 406 mm
50
m m
Ø 100 mm
30
0 m
m
10
m m
20x5 mm
TOU
CH
E 1
20 =
123
5 m
mTO
UC
HE
122
= 1
035
mm
TOU
CH
E 1
20 =
128
5 m
mTO
UC
HE
122
= 1
085
mm
79
TOUCHE 100
Steel S235JRwith
cataphoresisfinish
Steel S235JRwith cataphoresis
finish
Cover in Aluminium
Sensor for presence detection
Led signallingLights
Releasedevice withCustomizedkey
Hydraulic rising bollards The new line of small-size automatic rising better esthetical quality is requested, providing a
bollards (230 Vac hydraulic) with cylinder strong anti-breakthrough capacity.
Ø120 mm, that assures maximum security and TOUCHE 100 includes the anti-rising safety device
practicality. in presence of objects or persons on the rising
Suitable for every kind of installation for which a bollard, LED signal lights.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
80 hydraulic rising bollards
TOUCHE 120impact resistance without deformation 2,000 J
Impact resistance of the rising bollard without deformation
with a certain energy means that after the crash the
bollard continues working without undergoing damages to
the structure and the manoeuvre devices.
Impact mass-speed-energy diagram
MASS (Kg) 2,000 J 25,000 J
600 2.58 m/s 9.3 Km/h1000 2.00 m/s 7.2 Km/h1400 1.69 m/s 6.1 Km/h1800 1.49 m/s 5.4 Km/h2200 1.35 m/s 4.9 Km/h
2600 1.24 m/s 4.5 Km/h3000 1.15 m/s 4.2 Km/h3400 1.08 m/s 3.9 Km/h3800 1.03 m/s 3.7 Km/h4200 0.98 m/s 3.5 Km/h4600 0.93 m/s 3.4 Km/h5000 0.89 m/s 3.2 Km/h5400 0.86 m/s 3.1 Km/h5800 0.83 m/s 3.0 Km/h6200 0.80 m/s 2.9 Km/h6600 0.78 m/s 2.8 Km/h7000 0.76 m/s 2.7 Km/h7400 0.74 m/s 2.6 Km/h7800 0.72 m/s 2.6 Km/h8200 0.70 m/s 2.5 Km/h8600 0.68 m/s 2.5 Km/h9000 0.67 m/s 2.4 Km/h9400 0.65 m/s 2.3 Km/h9800 0.64 m/s 2.3 Km/h10200 0.63 m/s 2.3 Km/h10600 0.61 m/s 2.2 Km/h11000 0.60 m/s 2.2 Km/h11400 0.59 m/s 2.1 Km/h11800 0.58 m/s 2.1 Km/h12200 0.57 m/s 2.1 Km/h12600 0.56 m/s 2.0 Km/h13000 0.55 m/s 2.0 Km/h13400 0.55 m/s 2.0 Km/h13800 0.54 m/s 1.9 Km/h14200 0.53 m/s 1.9 Km/h14600 0.52 m/s 1.9 Km/h15000 0.52 m/s 1.9 Km/h
9.13 m/s 32.9 Km/h7.07 m/s 25.5 Km/h5.98 m/s 21.5 Km/h5.27 m/s 19.0 Km/h4.77 m/s 17.2 Km/h
4.39 m/s 15.8 Km/h4.08 m/s 14.7 Km/h3.83 m/s 13.8 Km/h3.63 m/s 13.1 Km/h3.45 m/s 12.4 Km/h3.30 m/s 11.9 Km/h3.16 m/s 11.4 Km/h3.04 m/s 11.0 Km/h2.94 m/s 10.6 Km/h2.84 m/s 10.2 Km/h2.75 m/s 9.9 Km/h2.67 m/s 9.6 Km/h2.60 m/s 9.4 Km/h2.53 m/s 9.1 Km/h2.47 m/s 8.9 Km/h2.41 m/s 8.7 Km/h2.36 m/s 8.5 Km/h2.31 m/s 8.3 Km/h2.26 m/s 8.1 Km/h2.21 m/s 8.0 Km/h2.17 m/s 7.8 Km/h2.13 m/s 7.7 Km/h
2.09 m/s 7.5 Km/h
2.06 m/s 7.4 Km/h2.02 m/s 7.3 Km/h1.99 m/s 7.2 Km/h1.96 m/s 7.1 Km/h1.93 m/s 7.0 Km/h1.90 m/s 6.9 Km/h1.88 m/s 6.8 Km/h1.85 m/s 6.7 Km/h1.83 m/s 6.6 Km/h
TOUCHE 120impact resistance with deformation 25,000 J
Impact resistance of the rising bollard with deformation
with a certain energy means that after the crash the
bollard cannot work and undergoes damages to the
structure and the manoeuvre devices.
IMPACT RESISTANCE TEST
TOUCHE 100
81
IMPACT RESISTANCE WITHOUT DEFORMATION 2,000 J
MASS (kg)
SP
EE
D (
km/h
)
IMPACT RESISTANCE WITH DEFORMATION 25,000 J
4
5
10
9
8
6
7
0 1500 3000 4500 6000 7500 9000 10500 12000 13500 15000
1
2
3
MASS (Kg)MODEL
865 Kg
1000 Kg
1300 Kg
1500 Kg
2200 Kg
3500 Kg
7500 Kg
15000 Kg
30000 Kg
MASS (kg)
SP
EE
D (
km/h
)
20
25
30
35
0 1500 3000 4500 6000 7500 9000 10500 12000 13500 15000
5
10
15
TOUCHE 100
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
82 hydraulic rising bollards
TOUCHE 100TOUCHE 120 11230 V hydraulic rising bollard - Ø 120 mm - h. 700 mm1
CodePieces
per palletPackage
Pieces Kg
TOUCHE 122 11230 V hydraulic rising bollard - Ø 120 mm - h. 500 mm1
AccessoriesRecommended control unit:
AJ85300External casing for TOUCHE 120
AJ85350External casing for TOUCHE 122
AS05530LED flashing management and anti-crushing safety management control unit for TOUCHE
AU02600Control unit case
For 1 or 2 motorsAS05580 (BA 230)See page 93
85001176
85701130
83
Installation example
TOUCHE 100
External casing for TOUCHE 100See page 82
TOUCHE 100 operator230 Vac See page 82
2 3
AU01940Wall-mounted key selectorDCS100
8
1
AU02000Pair of wall-mounted photocellsDCF180
9 10 11 12
AU02070 Green LED light24 Vdc/Vac IP54•
AU02060 Red LED light24 Vdc/Vac IP54•
AU01970 Plastic spacer cover to integrate 2 photocells and a selector or to create a traffic light
48134/220V 230 Vac metal detector
48134 24 Vdc metal detector
13
Recommendedcontrol unit:AS05580 (BA 230)See page 93
654
AU02700Plastic flashlight covers
AU02710Board + lamp
7
AU029102-channel receiver board
AU03000DOMINO radio controlDTS4334 - 433 MHz
10
11
12 9
5 6
8
4
1313
1
2
9
AS05530LED flashing management and anti-crushing safety management control unit for TOUCHE
VEGACamera for platesreading systemSee page 130
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
84 hydraulic rising bollards
TOUCHE 200Technical data
Dimensions
degree of protection
operating temperature
motor power supply
frequency of use
power absorbed
operator weight
use
resistance to breaking
operating pressure
resistance to impact without deformation
opening time
cylinder thickness
closing time
cylinder stroke
heavy heavy heavy heavy
TOUCHE275 TOUCHE276 TOUCHE277 TOUCHE278
600W 600W 600W 600W
15000 J 15000 J 15000 J 15000 J
350000 J 350000 J 350000 J 350000 J
10 bar 10 bar 10 bar 10 bar
10 s with single control unit 7 s with double control unit 7 s with single control unit 5 s with double control unit
IP67 IP67 IP67 IP67
340 Kg 340 Kg 240 Kg 240 Kg
40% 40% 40% 40%
230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz
15 s with single control unit 10 s withdouble control unit 11 s with single control unit 7 s withdouble control unit
700 mm 700 mm 500 mm 500 mm
10 mm 10 mm 10 mm 10 mm
-20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C
83
0 m
m
63
0 m
m
530 mm
730 mm
Ø 273 mm
thickness 10 mm
10
mm
TOU
CH
E 2
75-2
76 =
700
mm
TOU
CH
E 2
77-2
78 =
500
mm
TOU
CH
E 2
75-2
76 =
214
0mm
TOU
CH
E 2
77-2
78 =
174
0mm
TOU
CH
E 2
75-2
76 =
144
0mm
TOU
CH
E 2
77-2
78 =
124
0mm
600x500 mm
300
mm
530x430 mm
Ø 1 00 mm
570x470 mm
50
mm
590x490 mm
580 mm
480 mm
TOU
CH
E 2
75-2
76 =
139
0mm
TOU
CH
E 2
77-2
78 =
119
0mm
TOU
CH
E 2
75-2
76 =
144
0mm
TOU
CH
E 2
77-2
78 =
124
0mm
85
The new line of safety automatic rising bollards areas with heavy traffic.
(230Vac hydraulic) with diameter 275 mm and TOUCHE 200 includes the anti-rising safety device
thickness 10 mm, that provide the strongest in presence of objects or persons on the rising
anti-breakthrough capacity. bollard, LED signal lights.
Its high rising speed also allows installation in
TOUCHE 200Hydraulic rising bollards
Steel S235JRwith
cataphoresisfinish
Steel S235JRwith cataphoresis
finish
Cover inAluminium
Sensor for presence detection Led signalling
Lights
Releasedevice withCustomizedkey
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
86 hydraulic rising bollards
TOUCHE 200
TOUCHE 275impact resistance without deformation 15,000 J
Impact resistance of the rising bollard without deformation
with a certain energy means that after the crash the
bollard continues working without undergoing damages to
the structure and the manoeuvre devices.
Impact mass-speed-energy diagram
MASS (Kg) 15,000 J 350,000 J
600 7.07 m/s 25.5 Km/h1000 5.48 m/s 19.7 Km/h1400 4.63 m/s 16.7 Km/h1800 4.08 m/s 14,7 Km/h2200 3.69 m/s 13.3 Km/h
2600 3.40 m/s 12.2 Km/h3000 3.16 m/s 11.4 Km/h3400 2.97 m/s 10.7 Km/h3800 2.81 m/s 10.1 Km/h4200 2.67 m/s 9.6 Km/h4600 2.55 m/s 9.2 Km/h5000 2.45 m/s 8.8 Km/h5400 2.36 m/s 8.5 Km/h5800 2.27 m/s 8.2 Km/h6200 2.20 m/s 7.9 Km/h6600 2.13 m/s 7.7 Km/h7000 2.07 m/s 7.5 Km/h7400 2.01 m/s 7.2 Km/h7800 1.96 m/s 7.1 Km/h8200 1.91 m/s 6.9 Km/h8600 1.87 m/s 6.7 Km/h9000 1.83 m/s 6.6 Km/h9400 1.79 m/s 6.4 Km/h9800 1.75 m/s 6.3 Km/h10200 1.71 m/s 6.2 Km/h10600 1.68 m/s 6.1 Km/h11000 1.65 m/s 5.9 Km/h11400 1.62 m/s 5.8 Km/h11800 1.59 m/s 5.7 Km/h12200 1.57 m/s 5.6 Km/h12600 1.54 m/s 5.6 Km/h13000 1.52 m/s 5.5 Km/h13400 1.50 m/s 5.4 Km/h13800 1.47 m/s 5.3 Km/h14200 1.45 m/s 5.2 Km/h14600 1.43 m/s 5.2 Km/h15000 1.41 m/s 5.1 Km/h
34.16 m/s 123.0 Km/h26.46 m/s 95.2 Km/h22.36 m/s 80.5 Km/h19.72 m/s 71.0 Km/h17.84 m/s 64.2 Km/h
16.41 m/s 59.1 Km/h15.28 m/s 55.0 Km/h14.35 m/s 51.7 Km/h13.57 m/s 48,9 Km/h12.91 m/s 46.5 Km/h12.34 m/s 44.4 Km/h11.83 m/s 42.6 Km/h11.39 m/s 41.0 Km/h10.99 m/s 39.5 Km/h10.63 m/s 38.3 Km/h10.30 m/s 37.1 Km/h10.00 m/s 36.0 Km/h9.73 m/s 35.0 Km/h9.47 m/s 34.1 Km/h9.24 m/s 33.3 Km/h9.02 m/s 32.5 Km/h8.82 m/s 31.7 Km/h8.63 m/s 31.1 Km/h8.45 m/s 30.4 Km/h8.28 m/s 29.8 Km/h8.13 m/s 29.3 Km/h7.98 m/s 28.7 Km/h
7.84 m/s 28.2 Km/h
7.70 m/s 27.7 Km/h7.57 m/s 27.3 Km/h7.45 m/s 26.8 Km/h7.34 m/s 26.4 Km/h7.23 m/s 26.0 Km/h7.12 m/s 25.6 Km/h7.02 m/s 25.3 Km/h6.92 m/s 24.9 Km/h6.83 m/s 24.6 Km/h
TOUCHE 275impact resistance with deformation 350,000 J
Impact resistance of the rising bollard with deformation
with a certain energy means that after the crash the
bollard cannot work and undergoes damages to the
structure and the manoeuvre devices.
IMPACT RESISTANCE TEST
87
TOUCHE 200
IMPACT RESISTANCE WITHOUT DEFORMATION 15,000 J
MASS (kg)
SP
EE
D (
km/h
)
IMPACT RESISTANCE WITH DEFORMATION 350,000 J
5
0 1500 3000 4500 6000 7500 9000 10500 12000 13500 15000
MASS (Kg)MODEL
865 Kg
1000 Kg
1300 Kg
1500 Kg
2200 Kg
3500 Kg
7500 Kg
15000 Kg
30000 Kg
MASS (kg)
SP
EE
D (
km/h
)
80
100
120
140
0 1500 3000 4500 6000 7500 9000 10500 12000 13500 15000
20
40
60
10
15
20
25
30
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
88 hydraulic rising bollards
TOUCHE 200
Accessories
CodePieces
per palletPackage
Pieces Kg
TOUCHE 275
TOUCHE 277
TOUCHE 276
TOUCHE 278
1
1
1
1
1
1
1
1
230 V hydraulic rising bollard - Ø 275 mm - h. 700 mm
230 V hydraulic rising bollard - Ø 275 mm - h. 500 mm
230 V hydraulic rising bollard with double control unit - Ø 275 mm - h. 700 mm
230 V hydraulic rising bollard with double control unit - Ø 275 mm - h. 500 mm
1
1
1
1
Recommended control unit:
AJ85400External casing for TOUCHE 275 - 276
AJ85450External casing for TOUCHE 277 - 278
AS05530LED flashing management and anti-crushing safety management control unit for TOUCHE
AU02600Control unit case
Per 1 o 2 motoriAS05580 (BA 230)See page 93
85101
85501
85201
85601
340
240
340
240
89
TOUCHE 200Installation example
3
10
11
12 9
5 6
8
4
1313
1
2
9
AS05530LED flashing management and anti-crushing safety management control unit for TOUCHE
AJ85400External casing for TOUCHE 200See page 8888
TOUCHE 200 operator230 VacSee page
21
Recommendedcontrol unit:AS05580 (BA 230)See page 93
654
AU02700Plastic flashlight covers
AU02710Board + lamp
7
AU029102-channel receiver board
AU03000DOMINO radio controlDTS4334 - 433 MHz
AU01940Wall-mounted key selectorDCS100
8
AU02000Pair of wall-mounted photocellsDCF180
9 10 11 12
AU02070 Green LED light24 Vdc/Vac IP54•
AU02060 Red LED light24 Vdc/Vac IP54•
AU01970 Plastic spacer cover to integrate 2 photocells and a selector or to create a traffic light
48134/220V 230 Vac metal detector
48134 24 Vdc metal detector
13
VEGACamera for platesreading systemSee page 130
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
CONTROL
F4 PLUS1-2 motors - 230 Vac 92page
BA 2301-2 motors - 230 Vac 93page
BA 1001 motor - 230 Vac 94page
BA 241-2 motors - 24 Vdc 95page
BSC 241 motor - 24 Vdc 96page
F1/T1 motor - 380 Vac/T 98page
CL 100100pageonly for courtesy light or electromagnet
TL 100101pageonly for traffic lights
SR 10099page1 MPS motor - 230 Vac
SC 230102pagefor 230 Vac SL and PASS only
SC 24103pagefor 24 Vdc SL only
CB 24104pagefor 24 Vdc SL only
CB 25105pagefor 24 Vdc motors
BR 2497pagefor 24 Vdc BARR500 only
GECO LUX106pagefor GECO LUX only
GUIDE TO SELECTION
Gates
Control units
380 Vac
1 motor
1 or 2 motors
230 VacF4 PLUS
BA230
BA100
1 motor24 Vdc BR24Barriers
1 motor
1 or 2 motors
24 Vdc
BSC24
BA24
1 motor230 Vac SR100Rolling shutters
Control
24 Vdc
230 Vac
230 Vac
1 motor F1T
1 or 2 traffic lights
1 or 2 traffic lights
courtesy light
TL100
TL100
CL100
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
92
F4 PLUS
control
F4 PLUS Control unit AS04180
Code
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
TOP291 - TOP391 - TOP441 - FLOOR810 - BL230 - ART5000
YES
-
Trimmers and DIP-switches
4 inputs
-
1
220-230 Vac
1 or 2 at 230 Vac 3W (maximum 700W)
PASS1220 - PASS1820 - SL420 - SL820 ( )also double sliding gate
MODO500 - AUTOBOX3000
-
YES
MPS 120 - MPS 120E - MPS 160 - MPS 160E - MPS 240 - MPS 240E
-
YES
-
To find out about the other functions, see the table on page 108
230V
ac 4
0W M
AX
1 2 3 4 5 6 7 8
M2
MO
TO
R
CL
OS
E
LAM
P
LAM
P
MO
TO
R
OP
EN
MO
TO
RC
LO
SE
MO
TO
RC
OM
MO
TO
R
OP
EN
MO
TO
RC
OM
M1
EA
RTH
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
9 10 11 12
EA
RTH
28 29
PE
D
FCA
M1
STO
P
FCA
M2
FCC
M2
PH
OTO
CO
M
FCC
M1
STA
RT
CO
M
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
CO
M E
L
EL
12Va
c
GN
D
AN
T
24Va
c
0Vac
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
93
BA 230 EN 12453 friendly
BA 230 Control unit
Code
TOP291 - TOP391 - TOP441 - FLOOR810 - GROUND610 - BL230 - ART5000
YES - also 2 separate ones
-
Digital
4 inputs
YES
2
220-230 Vac
1 or 2 at 230 Vac 3W (maximum 700W)
PASS1220 - PASS1820 - SL420 - SL820 (also double sliding gate)
MODO500 - AUTOBOX3000
-
YES
YES
YESI
To find out about the other functions, see the table on page 108
33 34
GN
D
AN
T
FCA
M1
STO
P
FCA
M2
FCC
M2
PH
OTO
2
FCC
M1
CO
M
20 21 22 23 24 25 26 27 28 29 30 31 32
STA
RT
PE
D
CO
STA
PH
OTO
1
EA
RTH
EA
RTH
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
1 2 3 4
230V
ac 4
0W M
AX
5 6 7 8 9 10 11 12
LAM
P
LAM
P M2
MO
TO
RC
OM
MO
TO
R
OP
EN
MO
TO
RC
LO
SE
MO
TO
RC
OM
M1
MO
TO
RC
LO
SE
MO
TO
R
OP
EN
24V
cc 3
W M
AX
13 14 15 16 17 18 19
SP
IA
SP
IA
+24V
cc
CO
M E
L
EL1
12V
cc
EL2
12V
cc
+SA
FETY
0Vac
+24V
cc
RIS
ERVA
MPS 120 - MPS 120E - MPS 160 - MPS 160E - MPS 240 - MPS 240E
TOUCHE120 -TOUCHE275
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
AS05580
94
BA 100
control
BA 100 Control unit AS05060
Code
EN 12453 friendly
TOP291 - TOP391 - TOP441 - FLOOR810 - GROUND610 - BL230 - ART5000
YES
-
Trimmers and DIP-switches
2 inputs
YES
2
220-230 Vac
1 at 230 Vac (2 in parallel only - maximum 700W))
-
MODO500 - AUTOBOX3000
-
NO
YES
YES
To find out about the other functions, see the table on page 108
EA
RTH
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
1 2 3 4
EA
RTH
30 31
GN
D
AN
T
230V
ac 4
0W M
AX
5 6 7 8 9 10 11
LIG
HT
LIG
HT
MO
TO
R
OP
EN
MO
TO
RC
LO
SE
MO
TO
RC
OM
M
230V
ac 4
0W M
AX
LAM
P
LAM
P
STO
P
FCA
FCC
PH
OTO
1
CO
M
STA
RT
19 20 21 22 23 24
CO
M
25 26 27 28 29
PH
OTO
2
CO
M
CO
STA
CO
M E
L
EL
12V
cc
24Va
c 3W
MA
X
12 13 14 15 16 17 18C
OM
SP
IA
24Va
c
0Vac
+SA
FETY
24Va
c
MPS 120 - MPS 120E - MPS 160 - MPS 160E - MPS 240 - MPS 240E
-
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
95
BA 24
BA 24 Control unit
Code
EN 12453 friendly
BL240 - GROUND624 - ART5024
SL824 ( )also double sliding gate
AUTOBOX3024
BARR500 (also double barrier)
YES - also 2 separate ones
YES
Digital
4 inputs
YES
2
220-230 Vac
1 or 2 at 24 Vdc with limit switch (maximum 150W)
YES
YES
YES
To find out about the other functions, see the table on page 108
-
-
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
30 31
GN
D
AN
T
MO
TO
R
CL
OS
EM
OT
OR
OP
EN
AC
AC
CB
24
24V
cc 1
0W M
AX
4 5 6 7 8 9 10
LAM
P
LAM
P
1 2 3
M1 2M
SK
SK
MO
TO
R
CL
OS
EM
OT
OR
OP
EN
FCA
M1
STO
P
FCA
M2
FCC
M2
PH
OTO
2
FCC
M1
CO
M
18 19 20 21 22 23 24 25 26 27 28 29
STA
RT
PE
D
RIS
ER
VA
CO
STA
PH
OTO
1
24V
cc 3
W M
AX
11 12 13 14 15 16 17
+24V
cc
CO
M E
L
EL1
24V
cc
EL2
24V
cc
+SA
FETY
SP
IA
CO
M0V
cc
+24V
cc
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
AS05590
1 2
GN
D
AN
T
STA
RT
STO
P
PH
OTO
CO
STA
CO
M
OP
T
3 4 5 6 7 8
24V
cc 1
0W M
AX
CO
M
LAM
P
19 20 21 22 2316 17 18
24Va
c
0Vac
CB
24
SK
SK
LIG
HT
SP
IA24
Vcc
3W
MA
X
24V
cc 1
0W M
AX
MO
TO
R
CL
OS
E
MO
TO
RO
PE
N
9 10 11 12 13 14 15
M
FCA
FCC
+24V
cc
+SA
FETY
CO
M
+24V
cc
96
BSC 24
control
BSC 24 Control unit AS05030
Code
EN 12453 friendly
-
-
YES
Trimmers and DIP-switches
2 inputs
YES
1
220-230 Vac
1 at 24 Vdc with limit switch (2 in parallel only - maximum 100W)
-
AUTOBOX3024
-
-
YES
YES
To find out about the other functions, see the table on page 108
-
-
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Electric lock
Swing gates
Limit switch
Pedestrian
Rising bollards
Rolling shutters
Barriers
Motors
97
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Electric lock
Swing gates
Limit switch
Pedestrian
Rising bollards
Rolling shutters
Barriers
Motors
BR 24
BR 24 Control unit
Code
EN 12453 friendly
-
-
-
BARR500
-
YES
Digital
2 inputs
YES
1
220-230 Vac
1 at 24 Vdc with limit switch (maximum 150W)
-
YES
YES
To find out about the other functions, see the table on page 108
-
-
MO
TO
R
CL
OS
EM
OT
OR
OP
EN
0Vac
24Va
cC
B2
4
24V
cc 1
0W M
AX
LAM
P
LAM
P
M
SK
SK
4 5 6 7 81 2 3 38 39
GN
D
AN
T
9 10 11 12
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
LIG
HT
LIG
HT
13 14 15
CO
M
NC
NO
16 17 18
CO
M
NC
NO
19 20 21 22 23
SP
IA
SP
IA24
Vcc
3W
MA
X
+24V
cc
0Vcc
PH
TE
ST
CO
M
OP
T2
27 28 29 30 31 32 3324 25 26
STO
P
CLO
SE
FCC
SA
F. D
EV.
PH
OTO
1
FCA
STA
RT
OP
EN
CO
M
RIS
ER
VA
34 35 36 37
+24V
cc
SY
NC
AC
C.
SY
NC
0Vcc
OP
T2
AS05560
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
98 control
230V
ac 4
0W M
AX
LAM
P
LAM
P
18 19 20
NE
UTR
AL
23
0 V
ac
PH
AS
E T
38
0 V
ac
21 22 23
PH
AS
E S
38
0 V
ac
PH
AS
E R
38
0 V
ac
27 28 29 30 31 32
GN
D
AN
T
M
25 26 27
R
S
T
FCA
STO
P
CO
STA
FCC
CO
M
1 2 3 4 5 6 7 8 9 10 11 12 13
STA
RT
CO
M
PH
OTO
14 15 16 17
LED
EL
12V
cc
CO
M E
L
24Va
c
12Va
c
0Vac
EA
RTH
F1/T
F1/T
F1/T
Control unit with door-block switch
Control unit without door-block switch
61000
62000
Code
-
PASS2500/380
-
-
-
-
Trimmers and DIP-switches
2
YES
1
380 Vac + N
1 at 380 Vac three-phase (maximum 800W)
-
-
-
To find out about the other functions, see the table on page 109
-
-
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
99
SR 100 Control unit for shutters AS05190
Code
SR 100
Built-in radio
-
YES
YES, with edge
Trimmers and DIP-switches
Selectable on the edge
YES
1
220-230 Vac
1 at 230 Vac (maximum 700W)
-
-
-
MPS 120 - MPS 120E - MPS 160 - MPS 160E - MPS 240 - MPS 240E
-
-
-
To find out about the other functions, see the table on page 109
17 18
GN
D
AN
T
10 11 12 13 14 15 165 6 7 8 91 2 3 4
EA
RTH
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
230V
ac 4
0W M
AX
LAM
P
LAM
P
MO
TO
R
OP
EN
MO
TO
RC
LO
SE
MO
TO
RC
OM
M
PH
OTO
CO
M
G_O
P
+24V
dc
EA
RTH
G_C
L
STA
RT
SA
F
Power supply
Overhead doors
Sliding gates
Swing gates
Anti-crushing safety device
Safety device input
Photocell input
Force regulation
Deceleration functions
Programming
Limit switch
Rising bollards
Rolling shutters
Barriers
Motors
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
100 control
CL 100 Courtesy light board (DRR2000 plastic case not included) AS05200
Code
CL 100
Built-in radio
Control
Rolling shutters
Rising bollards
YES
-
-
Trimmers and DIP-switches
-
-
-
12/24 V ac/dc
Courtesy light or electromagnet
YES
YES
YES
YES
YES
-
-
L230
1 2 3
L / S
S12
/24
L12
/24
LUX
4 5 6 7 8
+ 12
/24
CO
M
- 12
/24
STA
RT
V_A
UX
9 10 11 12 13
NO
V_A
UX
NC
CO
M
CO
UR
TES
YLI
GH
T
MAGNETICLOCK
Swing gates
Power supply
Sliding gates
Overhead doors
Barriers
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Force regulation
Deceleration functions
101
TL 100 Traffic light control AS05180
Code
TL 100Control
YES
-
-
Trimmers and DIP-switches
YES
-
YES (command)
220-230 Vac
Traffic lights
YES
YES
YES
YES
YES
-
-
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
1 2 3 4
24Va
c
24Va
c - C
OM
FCA
5 6 7 8 9 10
FCA
IN_1
IN_1
IN_2
IN_2
C_1
11 12 13 14 15 16
R_1
V_1
C_2
R_2
V_2
Built-in radio
Power supply
Overhead doors
Sliding gates
Swing gates
Anti-crushing safety device
Safety device input
Photocell input
Force regulation
Deceleration functions
Programming
Limit switch
Rising bollards
Rolling shutters
Barriers
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
102 control
20 21
GN
D
AN
T
NE
UTR
AL
23
0 V
ac
PH
AS
E2
30
Va
c
1 2
230V
ac 4
0W M
AX
3 4 5 6 7
M
MO
TO
R
CL
OS
E
LAM
P
LAM
P
MO
TO
R
OP
EN
MO
TO
RC
OM
STO
P
PH
OTO
CO
M
CO
STA
STA
RT
8 9 10 11 12 13
PE
D
14 15 16 17 18 19
24Va
c
24Va
c 3W
MA
X
+SA
FETY
GN
D
SP
IA
+12V
cc
IND
UC
TIVE
SE
NSO
R
24Va
c
SC 230 for 230 Vac SL and PASS only
-
-
YES
Trimmers and DIP switches
2
YES
1
220-230 Vac
1 at 230 Vac with limit switch (maximum 700W)
SL and PASS at 230 Vac
-
-
YES
YES
YES
To find out about the other functions, see the table on page 109
-
-
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Electric lock
Swing gates
Limit switch
Pedestrian
Rising bollards
Rolling shutters
Barriers
Motors
SC 230
SC 230
A90763P
A90764P
Code
Complete control unit for PASS 1200 - 1800
Complete control unit for SL 400 - 800
103
22 23
GN
D
AN
T
STA
RT
STO
P
CO
STA
CO
M
8 9 10 11 12 13 14
PH
OTO
PE
D
1 2 3 4 5 6 7
24V
cc 1
0W M
AX
CO
M
24Va
c
0Vac
CB
24
SK
SK
SP
IA24
Vcc
3W
MA
X
LAM
P
15 16 17 18 19 20 21
MO
TO
R
CL
OS
E
MO
TO
RO
PE
N
M
+24V
cc
+SA
FETY
FCC
FCA
CO
M0V
ac
+24V
cc
SC 24 for 24 Vdc SL only
-
SL at 24 Vdc
-
-
-
YES
Trimmers and DIP-switches
2
YES
1
220-230 Vac
1 at 24 Vdc with limit switch (maximum 100W)
YES
YES
YES
To find out about the other functions, see the table on page 109
-
-
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Electric lock
Swing gates
Limit switch
Pedestrian
Rising bollards
Rolling shutters
Barriers
Motors
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
SC24 A90707P
Code
Complete control unit for SL at 24 Vdc
104 control
CB 24 for 24 Vdc SL only
-
-
-
-
-
-
-
24 Vac
Battery charger at 24 Vdc
SL at 24 Vdc
-
-
24 Vdc max 6,5 Ah
-
-
-
-
12
/24
V
0V
ac
LA
MP
GN
D
+S
K
1 2 3 4 5
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Built-in radio
Swing gates
Limit switch
Batteries
Rising bollards
Rolling shutters
Barriers
Control
CB 24
ACCESSORIES
ACCESSORIES
24 V battery charger board for AJ00605
Battery case to be fitted on the gearmotor
1 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00606
AJ00605
AJ00900
Code
Code
Code
1
1
1
Package Pcs.
Package Pcs.
Package Pcs.
105
CB 25 for 24 Vdc motors
YES
YES
YES
YES
-
-
-
-
-
-
24 Vac
Battery charger at 24 Vdc
24 Vdc max 6,5 Ah
-
-
-
-
24
Va
c
0V
ac
LA
MP
GN
D
+S
K
12345
Anti-crushing safety device
Safety device input
Photocell input
Power supply
Overhead doors
Force regulation
Deceleration functions
Programming
Sliding gates
Built-in radio
Swing gates
Limit switch
Batteries
Rising bollards
Rolling shutters
Barriers
Control
CB 25
ACCESSORIES
ACCESSORIES
24 V battery charger board for AJ00860
IP55 case for batteries and boards complete with battery fastening brackets
1 1.9 Ah battery (12 V)2 batteries are required for 24V
AJ00608
AJ00860
AJ00900
Code
Code
Code
1
1
1
Package Pcs.
Package Pcs.
Package Pcs.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
106 control
GECO LUX for GECO LUX only
-
-
YES
Trimmers and DIP-switches
2
-
1
220-230 Vac
1 at 24 Vdc (maximum 80W - for GECO LUX only)
-
GECO LUX 60 and 80
-
-
YES
YES
To find out about the other functions, see the table on page 109
-
-
Swing gates
Electric lock
Anti-crushing safety device
Programming
Limit switch
Safety device input
Photocell input
Power supply
Motors
Sliding gates
Overhead doors
Barriers
Pedestrian
Rolling shutters
Rising bollards
Force regulation
Deceleration functions
7 6 5 4 3 2 1
RX TX
LAM
P
STA
RT
STO
P
EM
ER
GN
D
+24V
cc
PH
OTO
OPTIONALBATTERY
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
108 control
photocell input
courtesy light output
automatic reclosing
closing photocell
stop input
limit switches input
edge input
motor RPM sensor input
plug-in receiver
receiver on board
LED inputs signalling
flashing light output
motors power supply
no. motors
accessories power supply
safety devices power supply
start input
pedestrian input
warning light output
12 Vdc electric lock output
24 Vdc electric lock output
safety devices test output
step-by-step
step-by-step with stop
condominium
EN 12453 friendly
dead man
Pre-flashing
hammer stroke
fast reclosing
opening photocell
torque regulation
decelerations
anti-crushing
hydraulic lock retention
operating time extension
manoeuvre counting
password
maintenance signalling
battery kit (optional)
limit switch amperometric stop
Function table F4 PLUS BA 100BA 230 BA 24 BSC 24
KEY: C = Edge / A = Amperometric / * = Single input
230 Vac 230 Vac 230 Vac 24 Vdc 24 Vdc
2 2 1 2 1
1
4 2 4 24
1 1 22
1 1
2
2
C C A/C A/C
24 Vac 24 Vdc 24 Vac 24 Vdc 24 Vdc
24 Vdc 24 Vac 24 Vdc 24 Vdc
BR 24
24 Vdc
1
1
2
A/C
24 Vdc
photocell input
courtesy light output
automatic reclosing
closing photocell
stop input
limit switches input
edge input
motor RPM sensor input
plug-in receiver
receiver on board
LED inputs signalling
flashing light output
motors power supply
no. motors
accessories power supply
safety devices power supply
start input
pedestrian input
warning light output
12 Vdc electric lock output
24 Vdc electric lock output
safety devices test output
step-by-step
step-by-step with stop
condominium
EN 12453 friendly
dead man
Pre-flashing
hammer stroke
fast reclosing
opening photocell
torque regulation
decelerations
anti-crushing
hydraulic lock retention
operating time extension
manoeuvre counting
password
maintenance signalling
battery kit (optional)
limit switch amperometric stop
Function table
109
SR 100SL and PASSwith SC 230
230 Vac 230 Vac
1 1
1 1
*
*
2
C C
24 Vdc
GECO 60/80
24 Vdc
1
1
2
A
24 Vdc24 Vac
24 Vac
SL with SC 24
24 Vdc
1
1
2
A/C
24 Vdc
24 Vdc
F1T
380 Vac three-phase
1
1
1
2
C
12/24 Vac
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Various accessories
DSL
DRR
DC
DG
DS
Flashlight
Receiver case
Photocells - Selectors - LED lights - Posts
60 Ø Photocells - 60 Ø Selectors - Posts
Safety devices
page
page
page
page
PRGPRG System
MANAGER System
page
page
page
page
ACCESSORIES
126
128
116
118
120
124
112
114
MANAGER
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
112 accessories
PRG
Radio receivers - Frequency 433 MHz
Remote controls - Frequency 433 MHz
DTS 4334Rolling Code remote control, black, 4 channels, frequency 433 MHz, with key ring and Velcro fastening included
DRS 43344-channel receiver for DRR 1000, DRR 2000 cases and DSL 2000 flashing light (outdoor use)
DTS 4334Rolling Code remote control, black, 4 channels, frequency 433 MHz
DRS 43322-channel plug-in receiver for control units
BLISTER ACCESSORYSet of 3 coloured covers for DTS 4334 + key ring and Velcro fastening
Package Pieces 1 Package Pieces 1
Code AU02810 Code AU02910
Package Pieces 1 Package Pieces 40 Package Pieces 1
Code AU03000 Code AU0400 Code AU04000
Dominates any type of system with the ease of a With the nifty accessories you can personalise
simple gesture that touches an object of high your remote control in your favourite colour, in
design. DOMINO is reliable and user-friendly with fact, the covers are easily interchangeable in just
its ergonomic small (but not too small) buttons. a few seconds.
You can attach it to your key ring or secure it in DOMINO: the modern way of using the most
your car using the fastening system included in advanced safety devices
the blister pack.
actual dimensions 43x43 mm
113
DOMINO
interchangeable covers
thickness 11 mm
easy maintenance
ergonomic buttons
IP40
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
DCT 300TRANSPONDER (Fixed Code) transmission device.See page 122
114
MANAGERDTC 4334Rolling Code remote control, two-colour black-grey, 4 channels, frequency 433 MHz, with key ring and Velcro fastening included.
Radio receivers - Frequency 433 MHz
Accessories
Remote controls - Frequency 433 MHz
Programmer
DRC 43344-channel receiver for DRR 1000, DRR 2000 cases and DSL 2000 flashing light (outdoor use).
DRC 43322-channel plug-in receiver for control units.
MANAGERProgrammer that allows the complete management of all the installations made with the MANAGER series devices
1Package Pieces
Code AU02820
1Package Pieces
Code AU02930
1Package Pieces
Code AS05150
DCD 100Keyboard for the activation up to 9 channels dialling up to 1000 customized codes.See page 122
DCX 100TRANSPONDER receiver for DCT 100, DCT 200, DCT300and DCT400. See page 122
accessories
DCT 100TRANSPONDER (Rolling Code)transmission device.See page 122
DCT 200TRANSPONDER (Rolling Code)transmission device.See page 122
Code AU03035
20Package Pieces
Code AU03040
20Package Pieces
Code AU03030
20Package Pieces
DCT 400TRANSPONDER (Fixed Code) CARD transmission device.See page 122
Package Pieces 1
Code AU02100
1Package Pieces
Code AU05000Code AU03070
20Package Pieces
DTC 4334Rolling Code remote control, two-colour black-grey, 4 channels, frequency 433 MHz.
BLISTER ACCESSORYSet of 3 coloured covers for DTC 4334 + key ring and Velcro fastening
1Package Pieces
Code AU03010
40Package Pieces
Code AU0410
1Package Pieces
Code AU04000
115
MANAGERThe programmer easy to use that allows the The system programming is done in WIRELESS
complete management of all the installations made technology.
with MANAGER series devices. MANAGER allows the user to program transmitting
The possibility to manage the system by PC and receiving devices both at radio frequency and
makes it easy to use and flexible. at transponder and to manage functionality,
The solution offered by GIBIDI to all customers customization, authorisation, modification and also
who want to make the installation their own the innovatory system anti-cloning always in safety
domain. modality (ROLLING-CODE).
MANAGER System
MANAGER 1.0
apriultimo progetto
chiudifinestra iniziale
apriprogetto esistente
creanuovo progetto
MANAGER 1.0
apriultimo progetto
chiudifinestra iniziale
apriprogetto esistente
creanuovo progetto
MANAGER 1.0
apriultimo progetto
chiudifinestra iniziale
apriprogetto esistente
creanuovo progetto
Code self-replacement
Code self-learning
User protection
Installer protection
Anti-cloning
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
116
DSL
accessories
Installation example
CAUTION: DSL2000 does not include the light board + bulb, which must be ordered separately
pillar-mountedwall-mounted rotating base
Accessories
DSL230A
AU02710
230 Vac fixed-light board + bulb
DSL2000
AU02700 Plastic flashlight covers
DSL230B
AU02720
230 Vac intermittent-light board + bulb
DSL024A
AU02724
24 Vdc fixed-light board + bulb
DSL230LControl unit LED 230 VacAU02610
DSL024LControl unit LED 24 VdcAU02624
AU028104-channel 433 MHz radio receiver
AU028204-channel 433 MHz radio receiver. It can work only with the MANAGER system
70187Antenna with cable 4 mFrequency 433 MHz
117
DSL
external protective cover
seal
coloured cover
IP55
flashlight board housing
receiver board housing
antenna base housing for wall-mounted device
antenna base housing for pillar-mounted device
base with cable conduit and seal
Kit contents
Yet another joy of modern technology and If you decide to use the built-in radio receiver, you
intelligent design applied to a flashlight. can store the transmitters simply by using the
Thanks to its modularity and extremely easy controls on the case.
installation, the radio receiver and antenna are DSL: the new hallmark of your automatic gate.
quickly integrated into one single product.
All you have to do is choose the type of flashlight
and your product is complete.
System
for external
flashlight
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
118
DRR
accessories
Installation example
pillar-mountedwall-mounted rotating base
AU028204-channel 433 MHz radioreceiver. It can work only with the MANAGER system
DRR1000
AU02800
Outdoor case for 4-channel receiver
AU028104-channel 433 MHzradio receiver
70187Antenna with cable 4 mFrequency 433 MHz
Accessories
DRR2000Outdoor case for receiverAU02600
119
DRR
screw caps
IP55
receiver board housing
seal
antenna base housing for wall-mounted device
antenna base housing for pillar-mounted device
base with cable conduit and seal
Kit contents
A new case for radio receivers suitable for outdoor The kit includes an adapter to install the outdoor
installation. antenna directly on the case.
Thanks to the extreme modularity, it can be wall- A new design for a simple and functional product.
mounted or pillar-mounted.
Outdoor
case for
radio receiver
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
120
DC
accessories
Code
DCF180
DCF180D
DCF180DB
DCB100
Pair of synchronised photocells, 180° rotation (12/24 Vdc/Vac), maximum range 30 m • IP54
Pair of synchronised digital photocells (maximum 16 pairs), 180° rotation (12/24 Vdc/Vac), maximum range 30 m • IP54
Pair of synchronised digital photocells, 180° rotation (12/24 Vdc/Vac) with battery-powered transmitter (batteries included), maximum range 20 m • IP54
Spare battery kit for DCF180DB (AU02020)3 V - 1100 mA/h
AU02000
AU02010
AU02020
AU01990
1
1
1
1
PackagePieces
The key selectors must be ordered asking for the specific code. The following 10 encoding codes are available:
01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10
To order a selector with relative key encoding code you need to indicate the product code followed by the encoding code.Example: DCS100 with encoding code 03 - order AU01940/03For more information on encoding see page 5
CodePackage
Pieces
DCS100
DCS200
DCS300
Wall-mounted key selector and DCA series columns + 3 keys • IP54
Wall-mounted key selector and DCA series columns with LED light + 3 keys • IP54
Wall-mounted key selector battery-powered via radio and DCA series columns + 3 keys • IP54
AU01940
AU01950
AU01960
1
1
1
121
DCThe new range of GIBIDI accessories, posts, and easy installation.
photocells and wall-mounted key selectors. A modular system that allows easy setting up and
A range designed to be adaptable to any kind of maintenance.
installation or aesthetic requirement, The perfect solution to complete your automatic
a patented system that includes technology, design entrance
Posts
Photocells
Key selectors
Light
easy maintenance
aluminium posts
european profile cylinder
fastening rails
spacer coverfor modularity
180° rotation
modularity
IP54
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
122 accessories
DCCode
Code
DCX100
DCD100
TRANSPONDER receiver for DCT 100, DCT 200, DCT300 and DCT400.Enabling distance 0÷20 mm at 125 KHz. Radio transmission on frequency 433 MHz. Power supply 12/24 Vdc - ac. It can be customized only with the MANAGER System • IP54
Keyboard for the activation up to 9 channels dialling up to 1000 customized codes.Radio transmission on frequency 433 MHz. Power supply 12/24 Vdc - ac or 7,2 V battery.It can be customized only with the MANAGER system • IP54
AU05000
AU02100
1
1
CodePackage Pcs.
DCT200
DCT300
DCT400
DCT100
TRANSPONDER (Rolling Code) transmission device.Enabling frequency 125 KHz. Packets of 20 pcs., without plastic case.It can be customized only with the MANAGER system
TRANSPONDER (Fixed Code) transmission device.Enabling frequency 125 KHz. Packets of 20 pcs., without plastic case.It can be customized only with the MANAGER system
TRANSPONDER (Fixed Code) CARD transmission device.Enabling frequency 125 KHz. Packets of 20 pcs. It can be customized only with the MANAGER system
TRANSPONDER (Rolling Code) transmission device. Enabling frequency 125 KHz. Packets of 20 pcs., without plastic case, to insert into DOMINO remote control. It can be customized only with the MANAGER system
AU03030
AU03035
AU03070
AU03040
20
20
20
20
Package Pcs.
Package Pcs.
DCB200 Battery kit for DCD100 (AU02100)7,2 V - 1100 mA/h
AU019951
123
DCL100 Yellow LED light24 Vdc/Vac • IP54(usable as flashlight)
AU02050
Code
1
Package Pcs.
DCL200 Red LED light24 Vdc/Vac • IP54
AU02060
Code
1
Package Pcs.
DC
DCL300 Green LED light24 Vdc/Vac • IP54
AU02070
Code
1
Package Pcs.
DCL400 LED courtesy light24 Vdc/Vac • IP54
AU02090
Code
1
Package Pcs.
DCA100 Plastic spacer cover to integrate 2 photocells and a selector or to create a traffic light
AU01970
Code
4
Package Pcs.
Code
DCA110-1
DCA110-2
DCA055-1
Aluminium posts H = 110 cm for one DCF photocell, DCS selector or DCL lights
Aluminium posts H = 110 cm for two DCF photocells, DCS selector or DCL lights
Aluminium posts H = 55 cm for one DCF photocell,DCL lights
70400
70410
70420
2
2
2
DCA200 Foundation plate for DCA and DGA columns
AU01980
Code
2
Package Pcs.
A
B
A
B
C
C
Package Pcs.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
124 accessories
DG
Galvanised case to be built in or welded for DGS100 and DGF100
70176
Code
1
Package Pcs.
Code
DGA110-1
DGA110-2
DGA055-1
Aluminium posts H = 110 cm for one DGF photocell, DGS selector
Aluminium posts H = 110 cm for two DGF photocells,DGS selector
Aluminium posts H = 55 cm for one DGF photocell
70300
70310
70320
2
2
2
Package Pcs.
Plastic case to be built in for DGS100 and DGF100
A90777P
Code
1
Package Pcs.
DGF100 Pair of 60 Ø built-in photocells (12/24 VDC/VAC), maximum range 30 m • IP54
DGF200 Pair of wall-mounted photocells (12/24 VDC/VAC), maximum range 30 m • IP54
AU01900
Code
1
Package Pcs.
AU01910
Code
1
Package Pcs.
DGS100 60 Ø built-in key selector with European Profile cylinder + 3 keysIP54
DGS200 Wall-mounted key selector with European Profile cylinder + 3 keysIP54
AU01920
Code
1
Package Pcs.
AU01930
Code
1
Package Pcs.
A
B
A
B
C
C
Posts
Photocells
Key selectors
125
DGThe range of GIBIDI accessories, posts, photocells A modular system that allows easy setting up and
and built-in or wall-mounted selectors. maintenance.
A range that can be adapted to any kind of Another solution to complete your automatic
installation requirement, that includes technology entrance.
and ease of installation.
easy maintenance
aluminium posts
european profile cylinder
fastening rails
modularity
IP54
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
126
DS
accessories
8K2 conductive edges
DSG40 Conductive rubber edgeH=40 in rolls of 12 m
70600
Code
1
Package Pcs.
DSA200 Aluminium strip for conductiveedge L=2 m
70620
Code
6
Package Pcs.
DSK40 Kit to make up 6 frames H=40.The kit is composed of 6 connectorswith 8K2 resistor, 6 connectors with 3 m cable 3 m, 12 caps, 1 bottle of glue, 1 bottle of primer
70660
Code
1
Package Pcs.
DSF200 Conductive edge with complete 8K2 resistor H=40 - L= 2 m
70650
Code
1
Package Pcs.
DSF150 Conductive edge with complete 8K2 resistor H=40 - L= 1.5 m
70630
Code
1
Package Pcs.
DSF180 Conductive edge with complete 8K2resistor H=40 - L= 1.8 m
70640
Code
1
Package Pcs.
DSC80 Control board for 8K2 edges, EN 12978 certified • IP55
AS05080
Code
1
Package Pcs.
DSC70 Control board for 8K2 edges, IP55
AS05070
Code
1
Package Pcs.
127
DSDSM150 Mechanical rubber frame with
aluminium rail - L=1.5 mDSM170 Mechanical rubber frame with
aluminium rail - L=1.7 m
70212
Code
1
Package Pcs.
70192
Code
1
Package Pcs.
mechanical rubber edges
DSM200 Mechanical rubber frame with aluminium rail - L=2 m
70193
Code
1
Package Pcs.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
128 accessories
ACCESSORIES
24 Vdc electric lock for swing gates without cylinder and plate
AJ00624
Code
1
Package Pcs.
12 Vdc electric lock for swing gates without cylinder and plate
AJ00612
Code
1
Package Pcs.
Left/right leaf lock
AJ00862
Code
1
Package Pcs.
Counterbushing for horizontal mounting
AJ70164
Code
1
Package Pcs.
Ground plate for vertical mounting
AJ70163
Code
1
Package Pcs.
European Profile half-cylinder for electric locks, selectors and unlocking devices + 3 keys
AJ00650
Code
1
Package Pcs.
220 Vac metal detector
48134/220V
Code
1
Package Pcs.
24 Vdc metal detector
48134
Code
1
Package Pcs.
Automatic gate plate
AJ75800
Code
1
Package Pcs.
129EN 12453 test instruments
TEST INSTRUMENTS
BLUE FORCE. Test instrument in case. Complete with Bluetooth interface for PC.BLUE FORCE software. LED display.
SPEED FORCE. Test instrument in case. Complete with serial-USB interface for PC.BLUE FORCE software. LED display.Adapter cable
Linear extension cable of 30 to 50 cm
Angular extension cable of 1.25 to 2.50 m.
EXTREME CASE. Instrument carrying case. Military certification C-4150-J, IP 67, ATA.Shockproof and complete with linear accessory, float and thermal switch.
Annual calibration service with calibration certificate
50V001B
50V001T
50V003
50V004
50V0011
Code
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
130 accessories
Automatic Number Plate ReaderVEGA Access• All in one System:
camera, analyser, IR illuminator;
• Embedded solution: OCR Software on board;
• All european Countries on board;
• Worldwide Countries available;
• Black/White list management;
• Range of action: 3.5 m width - 6 m distance;
• Storage: SD Memory up to 32 GB;
• Ethernet interface for supervised architecture.
Technical features
System
Digital Camera
Range of Action
Digital I/O
Communication
Dimensions & Power supply
CPU
Image Sensor
Distance
Input
Ethernet 10/100Mbps
Operating Temp.
Operating System
Illuminator
Storage
Optics
Width
Output
RS 485
Operating Humid.
Storage Humid.
Dimensions
Weight
Protection Level
Power Consumpt.
Storage Temp.
ARM Freescale 256 MB DDR2
B/W CCD 1300x1000 pixel
Up to 6 m
1 Optoisolated Input
TCP, UDP, FTP, HTTP, DHCP
-10° to 55°C (-40°C to 55°C available on request)
Embedded TOS (Tattile Operating System)
IR 850 nm - according to EN 60825-1
SD Cards up to 32 GB (50,000 users)
CS Mount Lens
Up to 3.5 m
2 Relè Output
1 line half duplex baud rate 1200:115200
10 to 90% non cond.
10 to 90% non cond.
123 x 109 x 400 mm (W x H x L)
3 Kg
Weatherproof standard IP66 according to EN 60529
24 Vdc +/- 10%, 6W
-20 to 65°C
Software features
OCR
Recognition
User interface
Communication
Country
ANPR Software
Interface
PC/Serverfunctioning
Types
Sensitivity
Configuration
Parking SWManagement
Data transmission
Data messagecustomization
Results
Results
Permission
Colour
All European Countries - Worldwide Countries available
Proprietary Plate Number Recognition Software
Graphical toolbar menu interface - Web browser interface
FTP Client vs. Remote FTP Server(s) for Images and Data Download. Alternatively: transmission of commands to VEGA anddata from VEGA through the TCP/IP socket.Fully configurable addressing table according to results.
IR-Reflective number plate models
Configurable gain, shutter & stobe
Easy LAN connection and configuration via Integrated Web Server,login and password protected
Images and Data transmission to PC station with Software installed (Tattile’s Application)
Ethernet
String syntax fully configurable for integration with access controlsystems or third party software
Number Plate Character string and/or Image (JPG compressed)
Read, Not_Read, No_Plate (triggered mode only)
Administrator, Operator and Guest levels
Monochromatic, 256 grey levels
131
Access Control SoftwareTattile Gate Master• User Friendly Interface;
• Scalable & Flexible System;
• Microsoft technologies;
• .NET Platform based;
• Personalized Users/Vehicles Info;
• Individual Access Authorizations;
• Unlimited Gates Number;
• Data report and Statistics.
Access Authorizations Personalized User/Vehicle Info
Alarm Management Report and Statistic
• Black/White list Management
• Personal and shared Authorizations
• Scheduling by:
- Time: Monthly, Daily, Hourly
- Position: Employeee, Supplier, Guest
- Authorization:
Permanent or Temporary
• Unauthorized transit:
- Wrong Gate
- Not matching Vehicles/Users
- Max time allowed
• Not read/matching Number Plates
• Parking overbooking
• Data Driver
• Photo Driver
• License Plate Number
• Vehicles Information
• Access Authorizations
• Access R
• Transit Information:
- Date
- Hour
- Barrier Number
- License Plate
• Datasheet export facility
eport
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
132 merchandising
133merchandising
Brochure totem
AIC5721
Code
1
Package Pcs.
Demo Gates
On request the demo gate unit can be customised.
DEMOGATE
Code
1
Package Pcs.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
134 merchandising
Cap
Sweatshirt (XL)
Sweatshirt (XXL)
AIC6250
Code
1
Package Pcs.
AIC6365
AIC6366
Code
Code
1
1
Package Pcs.
Package Pcs.
T-Shirt (L)
T-Shirt (XL)
T-Shirt (XXL)
AIC6362
AIC6363
AIC6364
Code
Code
Code
1
1
1
Package Pcs.
Package Pcs.
Package Pcs.
135merchandising
Pens in 5 different colours
AIC6308
Code
1
Package Pcs.
Badge tie
AIC6255
Code
1
Package Pcs.
Paper bag
AIC6390
Code
1
Package Pcs.
C R E AT I V E AU TO M AT I O N S C ATA LO G U E 2 0 1 1
Enforcement field defective for faults of design, material or manufacturing which can be These general conditions discipline all the present and future sales ascribed to GI.BI.DI., except faults deriving from tampering or facts contracts between the parties, except possible dispensations agreed in caused by the same purchaser as wrong installation, modifications or writing in detail. Possible general conditions of the purchaser will not find reparations made without GI.BI.DI. authorizations, use, maintenance or enforcement to the future relationships between the parties if they are not conservation not correct. accepted explicitly in writing. The acceptation on behalf of the purchaser Possible reparations / substitutions do not extend guarantee’s duration. of GI.BI.DI. offer or order confirmation, no matter how done, implies the You must consider excluded from guarantee the use of control board enforcement of these general conditions to the sales contract. equipments and/or control and safety accessories not made by GI.BI.DI., The offers done by GI.BI.DI. agents and trade auxiliaries are not binding feeding tension’s irregularities, use different from what expected or any until they are confirmed by the same company. other cause that cannot be ascribed to GI.BI.DI. These faults’ verification
lies exclusively within the competence of GI.BI.DI. technicians. Except Prices and payments (Export) GI.BI.DI. malice or heavy fault, this one is not answerable for direct, It is understood that the listed prices are ex works, including packaging, indirect and/or consequential damages deriving to the purchaser from end except single orders for amounts less than Euro 1.600,00 will be charged products (as, for instance, damages for non - use of supplied goods, on of a fixed cost of Euro 80,00, debited in the invoice. GI.BI.DI. reserve the behalf of the purchaser and/or the end user).right to modify his own price list at any time giving communication to the The guarantee above mentioned takes up and substitutes law guarantees purchaser. The prices have to be understood without VAT. GI.BI.DI. have for irregularities and conformities, and excludes any other possible right - starting from payment’s expiry, without necessity of meeting with GI.BI.DI. responsibility anyway caused by supplied goods; in particular arrears - to the arrears interests in accordance with the interest tax the purchaser will not able to claim compensation for damage, price imposed by E.C.B. to its main refinancing operations, increased by 8 reduction or contract resolution.percentage points. In case of delays in payments, GI.BI.DI. have right, The purchaser looses guarantee right if he is in order with payments. besides the remedy above mentioned, to suspend the supplies in Possible claims will have to be made in writing, at expiry penalty, within a progress until outstanding payments’ punctual fulfilment. The purchaser maximum term of 8 days from products’ receiving date for quality faults or has no right to suspend payments, not even in case of objections referring not conformity that the purchaser could note as soon as he receives to supplied products. goods; within 8 days from the discovery of hidden faults or not conformity. If the payment has to be done - completely or partially - after the delivery, When the guarantee is expired, you will be not able to put forward a claim products continue to belong to GI.BI.DI. until the moment of price’s towards GI.BI.DI. Goods shall be forwarded to GI.BI.DI. with transport complete payment. cost charged to the purchaser and they will send back ex-works
Orders and deliveries WarningsThe orders will be accepted, by order confirmation, only if sent in writing. The safety and reliability of the systems is warranties by the integral use of Delivery terms are understood indicative in favour of GI.BI.DI. and GI.BI.DI. components and by observing good working practices and the however with an adequate margin of tolerance. Any responsibility of laws in force. We therefore decline any responsibility due to a lack of GI.BI.DI. is excluded for consequential damages deriving from advanced respect for these conditions. GI.BI.DI. is not responsible for failure to or delayed delivery, total or partial. observe good working practice in the fabrication of the frames to automate
and their possible alteration due to use. GI.BI.DI. production must be Guarantee solely destined to the use for which it was designed. Any other use is GI.BI.DI. guarantee the performances of its own manufacturing products therefore considered to be improper and therefore dangerous. GI.BI.DI. only and exclusively with regard to uses, destinations, applications, etc. reservs the right to modify the technical data without prior notice explicitly indicated. The guarantee is intended to be applied only to depending on the product development.GI.BI.DI. components and thus not to the whole project or installation in which they are included. Any other use has to be considered improper and Applicable law - Judiciary concernedtherefore dangerous. In the case the purchaser intends products above All contracts disciplined by the present general conditions are regulated mentioned to sale, it will be his own burden and responsibility to let know to by Italian Law. For every dispute concerning or anyway connected to the his buyers the indications in object. contracts to which the present general conditions are applied GI.BI.DI. It is expected the reparation or substitution, at GI.BI.DI. choice, of Judiciary is exclusively concerned; however the last one wil have authority products that within 30 months from production date would be considered to act at the purchaser Judiciary.
The data and the images provided in this publication are merely indicative, and can be changed at any moment.
136 contractual conditions
GI.BI.DI. S.r.l.
Via Abetone Brennero, 177/B
46025 Poggio Rusco (MN) - ITALY
Tel. +39.0386.52.20.11
Fax +39.0386.52.20.31
w w w . g i b i d i . c o m we
b e
ditio
n