gfz gnss infrastructure and the global reference station ... · sutm ulab unsa wind voim wuh2 kit3...
TRANSCRIPT
The word mark may be omitted when using partner logos
Headline: Font: Verdana fett Fontsize: optional Fontcolour: Helmholtz blue (R-0, G-88, B-156 or C-100, M-50, Y-0, K-18 ) Body copy: Font: Verdana Fontsize:optional Fontcolour: Black Caption Font: Verdana kursiv, Fontsize: freigestellt, Fontcolour: Helmholtz blue (R-0, G-88, B-156 or C -100, M-50, Y-0, K-18 )
GFZ GNSS Infrastructure and the
Global Reference Station Network
M. Ramatschi, C. Hohmann, M. Bradke
Hardware development
Installation Examples
The global GNSS station network operated by GFZ serves since the foundation of the GFZ for investigation of global, scientific questions in different areas, and is an essential part of the scientific infrastructure of the GFZ. For this purpose, generations of hardware setups have been developed to ensure a continuous data logging with real time capabilities. This poster gives an overview of the developments of the last decade. All layouts shown here are driven by the same, linux based, GNSS station software.
Global Network
Map of the GNSS installations operated by GFZ. Stations contributing data to the IGS (International GNSS Service) are highlighted in it‘s context to available IGS station worlwide.
GSS reference station layout as introduced in 2007. 19“ rack with power supply, switchbox, off the shelf receiver, VPN router, 2 PC‘s (cold redundant) and Monitor / keyboard tray. Power consumption ca. 60 Watt (monitor off). It is the existing standard.
tinyPC and later tinyPC/2, a versatile low power PC with switching capabilities, can easily be combined with all sorts of GNSS receiver types and met sensors.
tinyPC/3, the same PC hardware as tinyPC/2, but including a Javad OEM receiver. Low power (5 Watt typ.) with wide temperature range -40°C ...+85°C). This setup is recommended for campaign mode installations.
tinyPC/4, using two hot redundant PC modules as in tinyPC/2, this receiver setup combines a high end Javad OEM receiver (Jvad TRE-3), switchboard and a GSM router. Still low power (15 Watt) with extended temperature range (-35°C ... +75°C). All modules are easily exchanged by means of a complex motherboard. This setup will be the future standard for the GFZ IGS Reference station network.
Permanent installation of a GNSS antenna /met sensor in Ny Ålesund / Spitsbergen. It is a roof top installation with a steel mast, the barrel shape construction acting as a thermal insulation.
Campaign mode installation for GNSS reflectrometry monitoring the water level of the Dead Sea. tinyPC/3 inside a sheltering box (unventilated) with solar panel.
The author likes to say thank you to all ‘on site’ contacts for their support. Even highly automated systems with sophisticated remote control capabilities need hands on care from time to time…
−180˚
−180˚
−150˚
−150˚
−120˚
−120˚
−90˚
−90˚
−60˚
−60˚
−30˚
−30˚
0˚
0˚
30˚
30˚
60˚
60˚
90˚
90˚
120˚
120˚
150˚
150˚
180˚
180˚
−90˚ −90˚
−60˚ −60˚
−30˚ −30˚
0˚ 0˚
30˚ 30˚
60˚ 60˚
90˚ 90˚
GFZ SITES 2018
ACRG
BIK0
JOG2
LPGS
MIZU
POTS
RIO2
SCUB
SGOC
SUTM
ULAB
UNSA VOIM WIND
WUH2
ZWE2
KIT3
NYA2
OBE4 URUM
UTQI
PMO1
TASH
OUS2
IGS Tracking NetworkGFZ SitesGGSP GFZ SitesPBO GFZ SitesDESERVE GFZ Sites
IGS workshop 2018, Wuhan/China