GettingStarted GuideFLIR Bxxx seriesFLIR Txxx series

© 2011, FLIR Systems, Inc. All rights reserved worldwide.4Publ. no. 1558790, rev. 008

EN-USEN-US EnglishA14 Hand strap.Rear viewFront view

A1 Touch screen LCD.A2 Cover for the SD memory card slot.A3 Zoom button. B1 Laser pointer button: Push to acti-A4 Stylus pen. Note: Push down the vate the laser pointer.

stylus pen firmly into its holder when B2 Preview/Save button: Push and holdnot in use. down the Preview/Save button for

A5 Camera button: Switch between the more than 1 second to save aninfrared camera and the digital cam- image. Push briefly to preview anera. image and link additional anno-

A6 Joystick: Move up/down or left/right tations to the image.to navigate on menus, in dialog B3 Focus button: Move left/right toboxes, and in the image archive. manually focus the camera. Push toPush to confirm choices. autofocus the camera.

A7 A/M button: Push to switch between B4 Attachment point for the neck strap.automatic and manual adjustment B5 Video lamp.modes. Push and hold down for B6 Digital camera lens.more than 1 second to perform a B7 Release button for additional infra-non-uniformity correction. red lenses.

A8 Measure button: Push to dis- B8 Laser pointer.play/hide measurement tools. B9 Infrared lens.

A9 Info button: Push to display/hide B10 Lens cap for the infrared lens.image information on the screen.

A10 Setup button: Push to display/hidethe setup menu.

A11 Archive button: Push to open/closethe image gallery.

A12 Mode button: Push to display/hidethe mode selector.

A13 On/Off button: Push to turn on/turnoff the camera.

© 2011, FLIR Systems, Inc. All rights reserved worldwide. 19Publ. no. 1558790, rev. 008

EN-US English

Choosing palette and temperatureConnectorsrange: To change the color palette andthe object temperature range, push theSetup button (A10) and use the joystick.Focusing the camera: To focus manu-ally, move the Focus button (B3) left/right.To autofocus the camera, push and re-lease the center of the Focus button (B3).Auto-adjusting the image:• To manually adjust the image, push

the A/M button (A7) to display M in thetop right corner of the screen, then usethe joystick.C1 To connect a headset to the camera

• To automatically adjust the image,to record and listen to voice anno-push the A/M button (A7) to display A.tations, use a headset cable and

this socket. Choosing mode: Push the Mode buttonC2 To connect a video monitor to the (A12) to choose between various modes

camera, use a CVBS (composite of operation:video) cable and this socket. • Camera mode:This is the most com-C3 To connect a computer to the cam- monly used operation mode of theera to move images and files to and camera. You select this mode to savefrom the camera, use a USB Mini-B an infrared image to the SD memorycable and this socket. card. If you push the Preview/SaveC4 To connect an external USB device button, the documentation toolbar willto the camera, use a USB-A cable be displayed.and this socket. • Video mode: If you select this mode,

you can record video clips with theProcedurescamera. You start and stop the re-Changing the language: To change the cording by pushing the Preview/Savelanguage, do the following: button.

1. Push the Setup button (A10). • Simultaneous mode: If you select this2. Move the joystick (A6) right to go to mode, and push and hold down the

the Regional tab. Preview/Save button (B2) for more3. Move the joystick (A6) down to select than 1 second, the camera will auto-

Language. matically save a digital photo at the4. Push the joystick (A6), then move the same time as it saves the infrared

joystick up/down to select your image.language. • Program mode: If you select this

5. Push the joystick (A6) to confirm your mode, you can periodically save im-choice. ages at a specified time interval.

6. Push the Setup button (A10) to leave • Panorama mode: If you select thisthe set-up mode. mode, you can create large images by

stitching normal images together.

© 2011, FLIR Systems, Inc. All rights reserved worldwide.20Publ. no. 1558790, rev. 008

EN-US English

To save an image: Push and hold downthe Preview/Save button (B2) for morethan 1 second to save an image. Pushbriefly to preview an image and linkadditional annotations to the image.To keep in mind:

• When closing a menu, use the samebutton that you used to open it.

• Blank objects may appear as warm orcold in the camera due to reflections ofother objects.

• Avoid direct sunlight on the details thatyou are inspecting.

• Various types of faults, such as thosein a building’s construction, may resultin the same type of infrared images.

• Correctly analyzing an infrared imagerequires professional knowledge aboutthe application.

Note: See the documentation on the CD-ROM for further information on camerafunctionality, applications, the theory ofthermography, and thermographicmeasurement techniques.

© 2011, FLIR Systems, Inc. All rights reserved worldwide. 21Publ. no. 1558790, rev. 008