M60

Getting connected with your device

LEGAL INFORMATION

Copyright © 2016 TOZED CORPORATION.

All rights reserved.

We reserve the right to amend the technical parameters of the user manual. We

will improve this user manual and adjust the printing errors in time without

notification in advance.

Knowing the appearance and key functions of your device

1.Left Key 7.Call History 13.Delete

2.Direction Key 8.Configuration 14.Number Key

3.Select Key 9.Volume Up 15.Quick Key

4.Screen 10.Volume Down 16.Microphone

5.Right Key 11.Power On/Off 17.Handfree Key

6.Contact 12.Mute 18.Dial Key

Connecting your device

To start using your device, connect your device as the following

schematic diagram.

Note: ❶ means computer that should be connected with M60 by

network cable.

❷ means DC adaptor.

❸ means wireless devices (e.g. phone, pad, laptop)

Install SIM: push the SIM from SIM slot. After hearing a “click”

sound, the SIM card is fixed right.

Configuring your PC

The following steps shows how to configure the Internet protocol in Windows10

system for WIFI connection.

1. Go to Control Panel and find Network and Internet, and then go into

Network and Sharing Centre. Select Change adapter settings.

2. Find Wireless Network Connection and right click it, and then click

Properties. In WiFi Properties, double-click Internet Protocol Version

4(TCP/IPv4), or select Internet Protocol Version 4(TCP/IPv4) and then

click Properties.

3. Select Obtain an IP address automatically, and Obtain DNS server

address automatically. Click OK to confirm.

Wireless connection

Method 1: Normal Connect

Select the SSID on computer or mobile phone and click Connect. After inputting

password, the WiFi can be used (default SSID and password can be seen on M60

sticker).

Method 2: WPS Connect

PC: Select the SSID on computer and click Connect as above. Press WPS

Connect in M60 WPS Setting menu, and then your computer will connect to the

SSID automatically without inputting password.

Mobile Phone: Press WPS Connect in M60 WPS Setting menu, and then

operate phone WLAN Menu Advanced Settings WPS connection. The

phone will connect with the SSID automatically without inputting password.

Note: If need to use WPS Connect, please first switch on the WPS function as

follows: WPS Setting WPS Switch Switch on Save. Then the WPS can

be seen on idle screen. Switch off to disable WPS feature.

Router Function menu on M60 device

Top level

menu

Secondary

menu

Remark

Router

Function

WiFi Status Show WiFi status

WiFi Setting SSID, WPS Setting menu, etc.

DHCP Settings local IP, DHCP switch, Advanced Setting

Standby status

Network signal strength

Battery label

WIFI signal

Current network type 4G

Calling forward open

Connect power supply

Missing calls

In charging

VoLTE active (if no, VoIP active)

Web configuration

The device supports standard internet cable or WLAN wireless way to connect with

computer or wireless devices. No matter what way to connect, please make sure to

set the mode: obtain IP address as automatically.

Please enter “192.168.8.1” in the IE browser after the computer obtain the IP

address. Then inputting username and password to access WEB UI. Router’s

default username is "user", and password can be seen on device sticker. For logging

into the WEB UI, proposed browsers are as follows:

● at least IE 7.0 ● at least Firefox 3.0

● at least Safari 4.0 ● at least Opera 10.0

● at least Chrome 10.0

Main features

1. Main features on phone menu

1) Voice Call

Calls

Dial

Method#1. Pick up the handset or press the Handfree

Key, then dial the number and wait for a few seconds or

press the “ ”key.

Method#2. Dial the number then press the “ ”key.

Method#3.pick up the handset and dial the number, and

then press the “ ”key.

Answer When receive a call, the phone will ring, pick up the

handset or press the Handfree Key to answer the call.

Call options When you are in a call, press the Volume Up or Volume

Down Key to change the volume.

Press the Mute Key so that other side cannot hear your

voice, press Mute Key again to cancel mute.

Call setting In idle screen, press Configuration Key Select Call

Setting.

2) Call History

Press Call History Key to enter the Call History Menu as follows.

Top level menu Secondary menu Remark

Call History

Call sent Sent call list

Call missed Missed call list

Call received Received call list

Erase calls Delete call history

3) Contact

Press Contact Key to enter the Contact menu as follows.

Top level menu Secondary menu Remark

Contact

Browse Browse contacts

Add Create contacts

Search Search contacts

Delete All Delete all contacts

Memory Space Contacts details

4) Configuration

Press Configuration Key to enter the Contact menu as follows.

Top level menu Secondary menu Remark

Configuration

LCD setting Setting backlight

Sound setting Set volume, ring type, ring

volume etc.

Time setting Set update time and time format

Network setting Select Network and set APN

Call setting Sip config, Auth config, call

wait etc.

Security PIN setting and factory reset

5) Router functions

Top level menu Secondary menu Remark

Router functions

WiFi status WiFi Status

WiFi setting Set SSID, password, WPS

setting etc.

DHCP setting Setting local IP, DHCP

switch, senior setting

6) System Info

Top level menu Secondary menu

System Info

Software Version

Voice status

Hardware Info

Model Version

Battery

MAC Address

Running time

Mobile Counter

7) Quick Dial

M60 provides 8 quick keys to make quick dial. Before using this function,

please setting quick key number as follows.

* If you have not set quick key number before, you can press the Quick Key

input the number press Left Key to save.

* If you want edit the quick key number that you have already set before, please

press Configuration Key Select Call Setting Select Quick Dial Select

the quick key that you want to edit. You can press Delete Key to delete the

number and set a new number.

2. Main features on WEB UI

1) Port Forwarding

Log into the WEB UI. Select Port Forwarding in Firewall Settings menu,

and then set port forwarding.

2) DDNS Settings

Log into the WEB UI. Select DDNS Settings in Route Function menu, and

then set DDNS parameters.

Warning and notice

Do not insert SIM card when the device is powered up. Please power off the

phone if long time non use the phone.

Use original power adapter and battery, or accessories that authorized by

Tozed, otherwise it may damage the device or cause dangerous.

Do not put the phone in the sunlight or high temperature place, it may cause

explosion due to high temperature of battery.

Some electronic devices will disturb electromagnetic field. Keep your

device away from TV, radio or other electronic devices to have best

performance.

Do not attempt to dismantle your device. It will make you void your

warranty.

The device is for indoor only. Do not use it outside.

Customer Service

Hotline: 117 100 100

Email: techsupport@dialog.lk

General Office

Dialog Broadband Networks (Pvt) Ltd. (PV 261)

No. 475, Union Place, Colombo 02

Sri Lanka

Tel +94 117 100 100 / FAX + 94 117 100 701

www.dialog.lk