get to know go hang it! progo+hang+it!+instructi… · b d f a e c removable level - snaps o˜ and...
TRANSCRIPT
B
D
F
A
E
C
REMOVABLE LEVEL - Snaps o� and sets on the top edge of your frame to level your pictures.
REMOVABLE PUSH PIN - Used to mark nail holes through the HOOKS (see �g. E.) when hanging pictures with wire hangers.
MAGNEKEYS - Remove and insert into the notch of our SINGLE-NOTCH PRECISION HANGERS, sawtooth or D-ring hangers to perfectly mark your nail holes.
CENTER BUTTON - Telescopes and extends the base of the unit for wire-hanging pictures. Simply push the button and pull.
BUILT-IN HOOKS - Used to suspend wire hanger pictures on the wall where desired. Insert the PUSH PIN into the guide holes to mark where your nails go.
SILICONE LATCH - Keeps the removable hardware case, with 85 pieces of picture- hanging hardware, attached to the unit.
GET TO KNOW GO HANG IT! PROA
B
C
D
E
F
© Aacraft, Inc. Georgetown, Texas. All rights reserved. Go Hang It! is a trademark of Aacraft, Inc. Patent pending. MADE IN CHINA
12 Single-Notch Precision Hanger
24 Self-Tapping Screws
10 Picture Hooks (10 lb)
8 Picture Hooks (20 lb)
4 Picture Hooks (30 lb)
10 Nails 1.7x25
10 Nails 2.0x30
6 D-Hooks
8 FT Hanging Wire (fits 10 lb Hooks)
HARDWARE ESSENTIALS INCLUDED
SAWTOOTH
PUSH PUSH
1
2
3
4
SAWTOOTH/D-RING PICTURE HANGING
INSERT MAGNEKEYSRemove the MAGNEKEYS and insert into sawtooth, D-Ring, or our SINGLE-NOTCH PRECISION HANGERS.
1 EXTEND & HOOKPress CENTER BUTTON to extend thebase. Suspend the frame wire on the BUILT-IN HOOKS, then position and LEVELpicture. Use the two, outer HOOKS for heavier frames and the single HOOK for lighter frames.
MARK HOLESPressing �rmly against the wall, remove your frame from the HOOKS . Locate the removable PUSH PIN (located beneath the LEVEL) and mark nail holes through the HOOK guide holes.
2LEVEL & MARK HOLESPlace removable LEVEL on top edge of the frame. Position and level frame on wall, then �rmly push directly over hangers to mark your nail holes.
INSTALL HARDWARELocate the marks on the wall made by MAGNEKEYS. Install nails straight into the wall marks.
HANG YOUR PICTURE
3
4
INSTALL HARDWARELocate the marks on the wall made by thePUSH PIN. Install picture hook hardware.
HANG YOUR PICTURE
WIRE PICTURE HANGING
See it in action atGoHangIt.com
@gohangit @go.hang.it.
Works with most picture hanging hardware.
Suggested weight limits:Nails in wood studs - 50 lbsNails in drywall - 10 lbs
!
D-RING