geotechnical drilling rig specifications - works.go.ug · €€€€€mud pump pressure, minimum...
TRANSCRIPT
GEOTECHNICAL DRILLING RIG SPECIFICATIONS
Date 24.07.2018
Weight of equipment , 6,500kg
Accessories for Drilling Rig
Note:
2) All items quoted under this specifications must be supplied as specified.
3) Items mentioned under consummables in 3.3 must be quotated and supplied seperately.
Flexibility of Drilling Rig: Fast and easy changes between wireline coring, flush rotary drilling
and auger drilling, providing excellent flexibility from one drilling platform to another.
Core, rotary and auger drilling packages.
Core drilling depth, minimum 175m
Rotary drilling depth, minimum 175m
Auger drilling depth, minimum 150m
Pull back capacity, minimum 55kN
Mud pump pressure, minimum 60 bars
Diesel Engine
Specification of Drilling Rig
Maximum hole size, minimum 175mm
Recommended rod size, minimum 76.1mm
Drill rod diameter, 89mm (minimum depth of 175m) - for flush rotary drilling package
Hollow stem augers diameter, 114mm, 127mm, 140mm and 168mm respectively
(minimum depth of 150m) for auger drilling package
NQ, HQ, PQ, and SQ core bits
Description: 1 No. Surface GEOTECHNICAL drilling rig, mounted on a BRAND NEW two axles
WHEELED DIESEL ENGINE trailer/truck complete with accessories as specified and operator's
mannual written in ENGLISH.
Centralizer (rod guide)
1) All drill rods of diameters 76.1mm and 89mm and augers of sizes 114mm, 127mm, 140mm and
168 must be supplied up to minimum total lengths of 175m, 175m and 150m respectively.
Safety cage
1000 mm mast dump for improved positioning on rough terrain
Rod clamps
63.5kg Standard Penetration Test (SPT) auto hammer
Sampling tubes
Flush rotary bits/wireline core bits/augers
Drill rod diameter, 76.1mm (minimum depth of 175m) - for wireline core drilling package
Drill rod storage, for 30 pieces
Mud pump pressure, minimum 60 bars
GEOTECHNICAL DRILLING RIG SPECIFICATIONS
Date : 23/07/2018
1.0
Hole Depth Meters Hole Depth U.S
Core drilling
NQ / NQ2” / NV / NV2” 350 m 1,150 ft
HQ / HV 220 m 710 ft
PQ / PV 575 ft
SQ 90 m 290 ft
Minimum Hole diameter 175 mm (6.9 in) 575 ft
Minimum Hole diameter 168 mm (6.7 in) 493 ft
Minimum depth capacity 175 m 575 ft
Recommended minimum hole size 115 mm 4.5 in
Maximum hole size 168 mm 5 in
Recommended minimum rod size 76.1 mm 3 in
1.1 PRIME MOVERMetric U.S.
Standard
Fuel
Fuel Consumption
Minimum Power 53 kW @ 2.300 rpm 71 hp @ 2,300 rpm
Electrical Circut
Fuel Tank Capacity 60 llitres 16 gal
1.2
Metric U.S.
Engine
Fuel
Fuel Consumption 223 g/kWh
Minimum Power 72,4 kW @ 2.300 rpm 94 hp @ 2,300 rpm
Electrical Circut 12VFuel Tank Capacity 60 litres 16 gal
225 g/kWh
DEUTZ D914 L04 air cooled engine, COM III, 4 cylinder
Diesel
DRILLING DEPTH GUIDELINES
Flush rotary drilling Package
Auger drilling Package
Wireline core drilling package
175 m minimum (Recommended)
175 m (Recommended)
150 m (Recommended)
12V
DEUTZ BF4L914 air cooled engine, COM II, 4 cylinder turbocharged
PRIME MOVER FOR HIGHER AMBIENT TEMPERATURE
Diesel
1.3 ROTARY HEAD Metric U.S.
Low Gear
3,560 - 723 lb-ft /
52 - 265 rpm
High Gear
1,368 - 265 lb-ft /
140 - 708 rpm
Bore - Inside Diameter 62 mm 2.44 in
Flushing Head - Inside Diameter 22 mm 0.87 in
Rotation Motors
Top Drive Flange
Hydraulic Motor at Max / Min Displacement, Diesel
Engine at 2200 rpm
Gear Ratio 1st - 7.68 : 1 2nd - 2.92 : 1Rotary Head Carriage with Side Shift
1.4 ROTARY HEAD Metric U.S.
Low Gear 6,540 Nm / 39 rpm
4,824 lb-ft / 39
rpm
High Gear 320 Nm / 800 rpm 236 lb-ft / 800 rpm
Bore - Inside Diameter 52 mm 2 in
Flushing Head - Inside Diameter 24 mm 1 in
Rotation Motors
Parker V12-80 + Danfoss TMT
315
Top Drive Flange 2 3/8” API Reg PIN
Gear Ratio 4.047:1
Distance From Drilling Line to Chain 435 mm 17.12 in
Rotary Head Carriage with Side Shift
1.5 HYDRAULIC SYSTEM
Metric U.S.
Primary Pump
Parker bent axis, fixed
displacement
Minimum Flow 66 lpm @ 2,200 rpm
17.5 gpm @ 2,200
rpm
Minimum Pressure 250 bar 3,626 psi
Secondary Pump Cassappa gear pump
Minimum Flow 59 lpm @ 2,200 rpm
15.5 gpm @ 2,200
rpm
Minimum Flow (2nd) 48 lpm @ 2,200 rpm
12.5 gpm @ 2,200
rpm
Minimum Pressure 175 bar 2,538 psi hp
Oil Tank Capacity 200 litres 53 gal
Danfoss - variable / reversible with pressure remote
2 3/8” API Reg PIN
4,880 - 980 Nm / 52-265 rpm
1,855 - 360 Nm / 140 - 708 rpm
1.6
Metric U.S.
Feed Stroke 4000 mm 13.2 ft
Feed Speed Normal / fast
Up 12.5/31 m/min 41/101 ft/ min
Down 18/51 m/min 59/167 ft/min
Pull down force 34 kN 7,673 lbf
Pull Back Force 55 kN 12,364 lbf
Drilling Inclination
Mast Dump 1000 mm 3.3 ft
Minimum Rod Length 3000 mm 10 ft
1.7 MAIN WINCHMetric U.S.
Line Pull 30 kN 6,744 lbf
Line Speed - Bare Drum 29 m/min 95 ft/min
Line Speed - Full Drum 36 m/min 118 ft/min
Cable Length, 14 mm 35 m 114.8 ft
1.8 ROD CLAMPSMetric U.S.
Minimum Diameter 220 mm 8.6 in
Minimum Clamping Capacity 175 kN 4,500 lbf
Minimum Breaking Torque 20,5 kNm 15,120 lb ft
CENTRALIZER - ROD GUIDE
Exchangeable Inserts for Rods
1.9 UNDERCARRIAGEU.S.
Type
Max. Driving Speed 1.5 km/hr 1 mph
Axis Distance 1715 mm 67.5 in
Minimum Ground Pressure 0,053 MPa 7.7 psi
Climbing Capacity 60% (approx. 30°)
Two axle wheel Trailer Mounted
Metric
45° off horizontal to 90° vertical down
56, 76, 89, 114, 127, 140, 168, 193, 220 mm (Choose required
sizes)
DRILL MAST AND FEED SYSTEM WITH FEED CYLINDER
2.0
Metric U.S.
Minimum Rod Pull 2 x 3 m (6 m) 20 ft
Fitted onto Standard Mast to Pull 6 m Rod
Rod Storage 30 pieces of 76 mm (3 in) rods
Towing Hook on Rear of Rig
2.1
Metric U.S.
Undercarriage
Width 1900 mm 74.8 in
Pad Width 300 mm 11.8 in
Weight 1035 kg 2280 lb
STANDARD PENETRATION TEST (SPT)
Hammer Weight 63.4 kg 140 lb
Drop Stroke 760 mm 30 in
Total Weight 180 kg 397 lb
With Rotary Head
Height 2784 mm 109.5 in
Width 1950 mm 76.6 in
Mast Length 6700 mm 263.5 in
Complete Height 7970 mm 313.5 in
2.2 OTHER ACCESSORIES
Steel Casing pipes, 10 pieces 3m long, 168mm dia.
Steel Casing pipes, 10 pieces 3m long, 140mm dia.
Steel Casing pipes, 10 pieces 3m long, 127mm dia.
2.3 Rock Coring System
Core barrel type A, 1 Piece 76mm
Core barrel type A, 1 Piece 89mm
Core barrel type C, 1 Piece 114mm
Core rods type A, 3m long, 20 Pieces 76mm
Core rods type B, 3m long, 20 Pieces 89mm (HQ)
Core rods type C, 3m long, 20 Pieces 114mm (PQ)
Core bits, type A, 25 Pieces 76mm
Core bits, type B, 25 Pieces 89mm
Core bits, type C, 25 Pieces 114mm
WEIGHT AND MEASUREMENTS
MAST EXTENSION FOR LONGER ROD PULL
GEOTECHNICAL DRILLING RIG SPECIFICATIONS (CONT'D)
2.4 WIRELINE WINCHMetric U.S.
Line Pull - Bare Drum 6,5 kN 1461 lbf
Line Pull - Full Drum 4,0 kN 90 lbf
Line Speed - Bare Drum 100 m/min 327 ft/min
Line Speed - Full Drum 200 m/min 656 ft/min
Cable Length 5 mm 350 m 1150 ft
MUD PUMP DP100
Metric U.S.
Continuous Flow 90 l/min 23.7 gpm
Pressure 30 bar 435 psi
2.5 MUD PUMP Metric U.S.
Continuous Flow 130 l/min 34 gpm
Pressure 60 bar 870 psi
FMC PUMP L0918
Metric U.S.
Flow 100 l/min 26 gpm
Pressure 45 bar 652 psi
2.6
Metric U.S.
Impact Rate 1-30 bpm
Travel Length 762 mm 30 in
Hammer Weight Brazil 63,5 kg 140 lb
OIL LINE LUBRICATOR FOR DTH DRILLING
Metric U.S.
Tank Capacity 10 l 2.7 gal
2.7 HIGH TEMPERATURE OIL COOLER
2.8 NIGHT LIGHTSNo. of Pieces 4
2.9
Jaw Plates For Coring BQ™ / BW
(Choose Required Sizes)
HQ™/HW
PW
3.0 MIST PUMPMetric U.S.
Flow 30 l/min 8 gpmPressure 200 bar 2,900 psi
STANDARD PENETRATION TEST (SPT) AUTO HAMMER
JAW BODY FOR CLAMP AND BREAK OUT FOR CORING
NQ™/NW (recommended)
Upgraded Oil Cooler For Ambient Temperatures Over 35°C (95°F)
3.1 ACCESSORIES
Auxiliary Work Vice
Remote Control
Auxiliary Diesel Filling Pump
Instrument Vandal Covers
Rubber Crawler Pads
Tool Box
Environmental Oil In Hydraulic System
3.2 CENTRALIZER - ROD GUIDE
Exchangeable Inserts for Rods
With necessary set of tools for basic maintenance
and lubrication
76, 89, 114, 127, 140, 168, 193, 220 mm (All are
required sizes)
Full set (76 pcs)
180 mm wide, 220 mm long, 120 mm deep clamp,
rotating mounting base and separate rod support
work bracket
Radio remote control for driving
Electric powered diesel filling pump
Lockable covers for control panels and
instruments
3.3
Diamond Impregnated Auger Drill Bits:
114mm dia. - 20 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
Tungsten Carbide Core Bits: Diamond Impregnated PDC Core Bits:
76mm dia. - 10 pieces 76mm dia. - 10 pieces
89mm dia. - 10 pieces 89mm dia. - 10 pieces
114mm dia. - 10 pieces 114mm dia. - 10 pieces
127mm dia. - 5 pieces 127mm dia. - 5 pieces
140mm dia. - 5 pieces 140mm dia. - 5 pieces
168mm dia. - 5 pieces 168mm dia. - 5 pieces
Diamond Impregnated PDC Core Bits:
76mm dia. - 10 pieces
89mm dia. - 10 pieces
114mm dia. - 10 pieces
127mm dia. - 5 pieces
140mm dia. - 5 pieces
168mm dia. - 5 pieces
Tungsten Carbide Core Bits:
76mm dia. - 10 pieces
89mm dia. - 10 pieces
114mm dia. - 10 pieces
127mm dia. - 5 pieces
140mm dia. - 5 pieces
168mm dia. - 5 pieces
Tugnsten Carbide Drill Bits:
76mm dia. - 20 pieces
89mm dia. - 20 pieces
114mm dia. - 20 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
SUPPLIES OF CONSUMMABLES (ADDITIONAL REQUIREMENTS)
Tungsten Carbide Auger Drill bits:
114mm dia. - 10 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
Hollow Stem Auger Section 1.5m long:
114mm dia. - 30 pieces
127mm dia. - 20 pieces
140mm dia. - 20 pieces
168mm dia. - 10 pieces
Diamond Impregnated PDC Core Bits:
76mm dia. - 10 pieces
89mm dia. - 10 pieces
114mm dia. - 10 pieces
127mm dia. - 5 pieces
140mm dia. - 5 pieces
168mm dia. - 5 pieces
Tungsten Carbide Drill Bits:
76mm dia. - 20 pieces
89mm dia. - 20 pieces
114mm dia. - 20 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
Diamond Impregnated Drill Bits:
76mm dia. - 20 pieces
89mm dia. - 20 pieces
114mm dia. - 20 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
Hollow Stem Lead Auger Section:
127mm dia. - 5 pieces
140mm dia. - 5 pieces
168mm dia. - 5 pieces
168mm dia. -5 pieces
Soil Sampling Tool:
Split Spoon Soil sampler - 5 Pieces
Geotechnical API Steel Casing Pipes 3m long:
127mm dia. - 5 pieces
140mm dia. - 5 pieces
168mm dia. - 5 pieces
Geotechnical Drill Rods 3m long:
76mm dia. - 20 pieces
89mm dia. - 20 pieces
114mm dia. - 20 pieces
127mm dia. - 10 pieces
140mm dia. - 10 pieces
168mm dia. - 10 pieces
Auger Drive Components:
Auger Drive Components:
HSA Drive Cap 2 3/8” API Reg PIN - 5 Pieces
Auger Connector Rod Pin 2 3/8” - 100 Pieces
Auger Drive Components:
Auger Connectors (threaded type) - 5pieces
Lifting Components:
Lifting bails ( externally threaded type) - 5 pieces
Lifting Components:
Lifting bails ( internally threaded type) - 5 pieces
Top Drive Flange 2 3/8” API Reg PIN - 5 Pieces
Drill rig spindle - 1 Piece
Geotechnical drill rod adaptors (female socket):
76.1mm - 50 pieces
89mm - 50 pieces
Geotechnical drill rod adaptors (male socket):
76.1mm - 50 pieces
89mm - 50 pieces
Geotechnical drill rod adaptors (nipple):
76.1mm - 50 pieces
89mm - 50 pieces
Geotechnical drill rod spanners:
76.1mm - 5 pieces
89mm - 5 pieces
114mm - 5 pieces
127mm - 5 pieces
140mm - 5 pieces
168mm - 5 pieces
Geotechnical drill rod spanners:
76.1mm - 5 pieces
89mm - 5 pieces
114mm - 5 pieces
127mm - 5 pieces
140mm - 5 pieces
168mm - 5 pieces
Geotechnical drill rod chain spanners:
76.1mm - 10 pieces
89mm - 10 pieces
114mm - 10 pieces
127mm - 10 pieces
140mm - 10 pieces
168mm - 10 pieces