geometric dimensioning and tolerance
TRANSCRIPT
![Page 1: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/1.jpg)
Geometric Dimensioning and Tolerance
- Harshada Gurav.
![Page 2: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/2.jpg)
Introduction to ASME Y14.5 – 2009
• It is a standard published by American Society of Mechanical Engineers (ASME) and is considered the authoritative guideline for the design language of geometric dimensioning and tolerance (GD&T).
• The International System of Units (SI) is featured in this Standard
![Page 3: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/3.jpg)
ANSI/ASME Y14.5
Responsibility for Maintenance of the Standard Shifted ANSI → ASME after the 1994 Version
![Page 4: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/4.jpg)
Example
![Page 5: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/5.jpg)
Tolerances of Form
• Form tolerances control straightness, flatness, circularity, and cylindricity.
• Form tolerances are applicable to single (individual) features, elements of single features, or features of size.
![Page 6: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/6.jpg)
Straightness
• Straightness is a condition where an element of a surface, or derived median line, is a straight line. It is applied in the view where the elements to be controlled are represented by a straight line.
![Page 7: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/7.jpg)
Flatness
• Flatness is the condition of a surface or derived median plane having all elements in one plane.
![Page 8: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/8.jpg)
Circularity or Roundness• Circularity is a condition of a surface where– for a feature other than a sphere, all points of the
surface intersected by any plane perpendicular to an axis or spine (curved line) are equidistant from that axis or spine
– for a sphere, all points of the surface intersected by any plane passing through a common center are equidistant from that center.
![Page 9: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/9.jpg)
Cylindricity
• Cylindricity is a condition of a surface of revolution in which all points of the surface are equidistant from a common axis.
![Page 10: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/10.jpg)
Tolerances of Orientation
• An orientation tolerance controls parallel, perpendicular, and all other angular relationships.
• There are three orientation relationships and three symbols to define those relationships.– Angularity– Parallelism– Perpendicularity
![Page 11: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/11.jpg)
Angularity
• Angularity is the condition of a surface, feature’s center plane, or feature’s axis at any specified angle from a datum plane or datum axis.
![Page 12: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/12.jpg)
Parallelism• Parallelism is the condition of a surface or
feature’s center plane, equidistant at all points from a datum plane; or a feature’s axis, equidistant along its length from one or more datum planes or datum axis.
![Page 13: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/13.jpg)
Perpendicularity
• Perpendicularity is the condition of a surface, feature’s center plane, or feature’s axis at a right angle to a datum plane or datum axis.
![Page 14: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/14.jpg)
Tolerances of Location• It Includes position, concentricity, and
symmetry
Symmetry• Symmetrical relationships may be
controlled using either positional, profile, or symmetry tolerances.
![Page 15: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/15.jpg)
Position• Position is the location of one or more features of
size relative to one another or to one or more datums.
![Page 16: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/16.jpg)
Concentricity• Concentricity is a tolerance that controls the
central axis of the referenced feature, to a datum axis.
![Page 17: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/17.jpg)
Tolerances of Profile
• A profile tolerance may be applied to an entire part, multiple features, individual surfaces, or to individual profiles taken at various cross sections through a part.
• There are two types– Line profile– surface profile
![Page 18: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/18.jpg)
Line profile
• Each line element tolerance zone established by the profile of a line tolerance requirement is two-dimensional (an area) and the tolerance zone is normal to the true profile of the feature at each line element.
![Page 19: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/19.jpg)
surface profile
• The surface profile tolerance is three dimensional (a volume), extending along the length and width (or circumference) of the considered feature or features.
![Page 20: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/20.jpg)
Tolerances of Runout
• Runout is a tolerance used to control the functional relationship of one or more features to a datum axis established from a datum feature specified at RMB (Regardless of Material Boundary).
• TYPES OF RUNOUT TOLERANCES– Circular Runout– Total Runout
![Page 21: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/21.jpg)
Circular Runout• Circular runout provides control of circular
elements of a surface. The tolerance is applied independently at each circular measuring position as the part is rotated the full angular extent of the surface about the simulated datum axis.
![Page 22: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/22.jpg)
Total Runout
• Total runout provides control of all surface elements. The tolerance is applied simultaneously to all circular and profile measuring positions as the part is rotated 360 about the datum axis.⁰
![Page 23: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/23.jpg)
GD&T – Form & Profile
INDIVIDUAL (No Datum Reference)
INDIVIDUAL or RELATED FEATURES
GEOMETRIC CHARACTERISTIC CONTROLS
TYPE OFFEATURE
TYPE OFTOLERANCE CHARACTERISTIC SYMBOL
FLATNESS
STRAIGHTNESS
CIRCULARITY
CYLINDRICITY
LINE PROFILE
SURFACE PROFILE
FORM
PROFILE
14 characteristics that may be controlled
![Page 24: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/24.jpg)
GD&T – Orient, RunOut, Location
RELATED FEATURES (Datum Reference Required)
GEOMETRIC CHARACTERISTIC CONTROLS
TYPE OFFEATURE
TYPE OFTOLERANCE CHARACTERISTIC SYMBOL
SYMMETRY
PERPENDICULARITY
ANGULARITY
PARALLELISM
CIRCULAR RUNOUT
TOTAL RUNOUT
CONCENTRICITY
POSITION
ORIENTATION
RUNOUT
LOCATION
14 characteristics that may be controlled
![Page 25: Geometric dimensioning and tolerance](https://reader033.vdocuments.us/reader033/viewer/2022061618/55cdf5e4bb61eb831b8b4846/html5/thumbnails/25.jpg)