geological branches a-basic geology:- b-connected branches:- c- applied geology:-

1

1. Geology

Geology = Earth Science

What is the meaning of geology ?

Geology is the study of Earth, includes, Chemical and Physical Properties, Earth Creation, Inner and Outer Processes Affected it,

Since Its Creation To Present Day.

2

Geological Branches

A-Basic geology:- B-Connected Branches:- C- Applied Geology:-

1- Crystallography . 1- Geochemistry. 1-Economic Geology.

2- Mineralogy. 2- Geophysics. 2-Engineering Geology.

3- Petrology . 3-Geomorpholpgy. 3-Petroleum Geology.

4- Paleontology . 4-Structural Geology. 4-Hydrogeology.

5- Stratigraphy . 5-Photogeology. 5-Mining geology.

6- Dynamic geology . 6-Oceanography. 6-Agricultural geology.

7- Historical geology . 7- Field geology. 22 7-Miltary geology.

8-Glacial geology.

9-Volcanology.

10-Cosmic geology.

11-Geodesy.

The relationship between geology and other sciences

1-Physics ----------- Geophysics ---------- 1-Gravity Method. 2-Magnetic Method. 3-Seismology. 4-Electrical Method.

2-Biology --------------- Paleontology ------Remaining of Animals and Botanical.

3- Chemistry ----------- Geochemistry.

4-Engineering ---------- Engineering geology.

2

3

History of Geology

1-Humorous 600 B C :-He put an idea about the shape of Earth and he descript the earth as a disc surround by water.

2-Aresto 384-322 B C :-He is provided that the Earth is a ball by scientific method . by observation he is noticed that, the matter collection is to the same center .

3-Herodotus 424-484 B C:-The first scientist who noticed the remaining of Botany and Animals on the mountains of earth crust , which is prove that the present mountains were oceans surfaces in the deep past..

4-Khalelo 1546-1642 C :- He is Provided the motion of earth around its axis is from west to east .

5-William Smith 1769-1839 C :-He is the first scientist whose established stratigraphy and correlation by its contents of fossils and he was drawing a geological map for e England in 1845 .

History of geology- Arab scientists

1-Ibin Siena died 1049 :-The first one who is established the geology and studied also the minerals .

2-Al Bairony died 1271 :-He is described an expensive crystals minerals in scientific methods .

3-Alrazi died 1369 :-He is divided the minerals into six groups in his book (secrets of the secrets) .

Other scientist such as Jahith Takishkhandy Sarkhasy et .

3

4

The site of Earth within Galaxy (Milky Way)

SUN

Earth

Mercury

Venus

MarsJupiterSaturn

Uranus

NeptuneP

luto

88 D

1.88Y

225D

11.86Y

29.46Y

82.02Y

164,8Y

247.7Y

D = DayY = Year

364.25 D

4

5

Hypothesis of Earth Creation and Global System 1-Buffoon Ht 1707-1788 (France) :-The first scientist, which is put an idea for the source of earth in his book, (The Natural History). The idea is the present global system results from very hard attack between the sun and one of big solar mass, then many big masses are separated and swimming in Space to different distances around the sun controlled by Sun gravity.

2-Kants Ht 1755 (German) :-This hypothesis proposed that the whole solar system was consist of very much of small solid parts swimming in the global system in high speed. This parts were collected together by gravity with high heating due to attachment between it, which result very hot gases (NEBULA) rotated around together in great speed. This conditions gives a hot gas rings and by the, out of center force forming our Sun system.

3-Nebular or Lab Lass Ht 1796 France:-The solar system in the beginning ( NEBULA) was occupied about four sizes of the solar

system. With time, there are heating loss ,contraction which results rotation with high speed around (NEBULA) axis .at same

time the out of center force makes a cycle with irregular out line which results a big masses named the solar system. later

the contraction of masses with continuous cooling and rotation makeup the solar system.

4-Other hypothesis:- a-Planetesimal hypothesis (Chamberlin- and Moulton American- Geologist 1905).

b-Gaseous Tidal Ht (Jemis and Jeffery 1929).

New theories in origin of solar system

1-The Nuclear Explosions Theory 1931:-This Theory suggests that, a part of Global Space is composed of Dense Gases (Protogalaxy). With time these gases collects together to form ( Nuclear Cells). So at same time Great explosions is happened for global bodies which is separated it faraway from its original space to form (Global Galaxy). After that the Gases are began cooling with space reduction and rotation, then finally a new birth for solar Galaxy in space, before about 10-13 Billion years ,while Gases condensation is create about 250 million years ago.

2-Great Gas Cloud Theory 1942 -1948:-In the beginning the Sun and Stars were as Global cloud consist of Gases and dust. it is condensed by stars light pressure, dust and gases gravity forces. This conditions lead to create rotation state to form (Primary Nuclei), The remanent clouds stays in the center forming the Sun. Later this theory considered the Electromagnetic force is played as important agent in global system.

5

6

Earth Creation

Since 6 Billions years , the Earth was separated from Sun. So by rotation , continuous cooling ,the mass of gas became Ball-shape covered by solid crust called (Earth crust ), while the inner of Earth still in Fusion state.

There are four stages at Earth Creation:-

1-Anhydric Period:-In this period the elements consists Earth differentiated into three zones ( Gases and liquids Earth crust, Mantle and Core) depend on gravity, rotate around Earth,( mass of gases and liquids are the outer shall) as :- a-Gases and Liquids zone. b-Silicate-Sulfides zone--------Outer part (Earth crust). c-Iron- Nickel zone-------------Inner part (Mantle and core).

-The cooling time of Earth crust is take about 900-1000 million years.

. 2-Oceanic Period( water Basins):-This period of Rains fall is due to the critical Temperature of water, which is form water Vapor, then Rainfall within about 300- 400 million years.

3-Contraction Period:- A big water Basins such as oceans seas are the result of continuous cooling for earth crust, association with mountains building within about 1000 -1700 million years.

4-Continintal Drift period:- There are many evidence says that, the Dry parts of earth (Crust) was connect in the ancient time. Then by Earth Dynamic (Hypogene Processes) the crust moves along the fusion zone of Earth (upper part of mantle-Asthenosphere) which is result sedimentary basins due to the big Oceanic sediment.

Conclusions:-

a-The Earth crust and air cover were buildup at first stage. b-The water cover was buildup at second stage. c-The ancients evidence of life is before 2500 million years.

7

Nature of EarthA-Dimensions of Earth :-

1-The polar Radius =6357 kilometre .

2-Equator Radius =6378 kilometre .

3-Polar Circumference = 6357 km x 2 x 22 ÷ 7 = 40 009 kilometre .

4-Equator Circumference = 6378 km x 2 x 22 ÷ 7 = 40 077 kilometre .

5-Area of earth surface = 510 000 000 square kilometre.

7-Dry area of earth surface = 29,22% = 149 000 000 square kilometre.

8-Water area of earth surface = 70.78% = 361 000 000 square kilometre.

9-highest point of dry area at earth surface = 8848 metre (Everest mountains crest).

10-Avverage of earth surface = 840 metre.

11-deeper point of ocean = 11033 metre (Mariana trench).

12-Average of ocean deep = 3808 metre.

Equator

Polar Dimension

7

88

Crust

Upper Mantle

Lower Mantle

Upper Core

Lower Core

sailSima

Conrad Discontinuity

Mantle

Moho Discontinuity

Core

(AsthenoSphere(

Gutenberg Discontinuity

(Mesosphere)

Peridotite Rocks

Pallasite Rocks ()

5 - 60 km

35 - 2900 km

2900 - 6370 km

Crust

Lower Mantle

Upper Core

Lowe Core

Sima

Mantle

Moho Discontinuity

Gutenberg Discontinuity (peridotite=Fe)

5 - 60 km

Core

Upper Mantle

Peridotite Rocks


Mantle Density = 4.53 gm/cm3

Core Density= 10.7gm /cm3

Earth Crust Density= 2.85 gm/cm3

0 C

870 C

2 200 C

6 000 C

Fe = 90%

Ni = 10%

C R O S S

S E C T I O N

I N

E A R T H

C R O S S

S E C T I O N

I N

E A R T H

sial

Iron+Ni

6370 km

2900 km

8

9

Earth Covers 1-Atmosphere cover. 2-Hydrosphere cover.

3-Biosphere cover. 4-Lithosphere cover.

1-Atmosphere cover :-It is Air cover, surrounding Earth. Its thickness about 316 km . atmosphere is consist of many Gases like :-

a- N2 about 78%

b- O2 about 21%

c- Ar about 0.93

d- CO2 about 0.03%

e- H2 about 0.011

99.124% About 35 PPM are inactive Gasses such as Neon, Helium and Ozone are present in Atmosphere .

1-Atmosphere Cover:-Atmosphere cover is divided into:-

A-Troposphere layer :-

1- Elevation of Troposphere layer is about 8 - 18 km .

2- Temperature is decreasing about 6 C every 1 km

rising

3-This layer is consist of homogenous gases, water

vapour, CO2 and dust .

B-stratosphere layer :-

1- The second layer with elevation about 50- 80 km .

2- The lower part of this Layer is (50 km) named

Ozone layer .

3- Stratosphere temperature is increase to 35 C with

no storm.

4- Stratospheric Pressure is 0.5 mm mercury (1/1520) of Normal Pressure.

C-Ionosphere Layer:- 1- The elevation is about 80 – 316 km 2- the Ionization is due to the affects of the Cosmic and Ultra violent Rays, so it is good Conductor for Electricity. 3- Many of (Meteors and Meteorites)are Burn with Traffic in this Layer. 4- This Layer is Good medium to cross Radio and Wireless Waves.

D-Exosphere layer :-

The highest layer in the Atmosphere ,so it is extend as far as entrance of outer space .

Meteor:-

It is Solid, Small masses swimming in the space, but when it

falls on the Earth it called (Meteorites).

9

10

2- Hydrosphere Cover:-

Hydrosphere is consist of Oceans, Seas, Lakes, Rivers and Ground Water.

The Water of Oceans, Seas Contains (Constant Weight) 35 gram per letter of different Salts, commonly of Sodium

Chloride type (NaCl).

Rivers Water:-contains generally less than 1 gram per letter Salts commonly of calcium bicarbonate and calcium

carbonate Water type.

Ground water:-quality of ground water depends on the ground water source, host Rocks and the migration of the ground

water. Ground water contains a wide variety of salts. Ground water may be Fresh water ( less than 1 gram per letter)

or Saline water (More than 10 gram per letter).

3-Biosphere Cover:- Biosphere:-It is not true Cover. It is consist of Animals and Botany Creatures which deals with Hydrosphere, Atmosphere

and the upper part of Lithosphere cover. Biosphere plays important rule in the difference changes on Earth Crust.

4- Lithosphere Cover:-

The thickness of Lithosphere (Earth Crust) is from 5 km in the Oceans to 60 km in the Mountain regions.

The Wells drilling operations in the Earth Crust still about 10 km depth. Earth Crust consist of Sedimentary, Igneous and metamorphic Rocks, covered by Soil in many regions of Earth.

The Soil is a Result of Disintegrate ,Erode of all kinds of Rocks with different thickness depend upon many factors.

The Rocky layers of Earth Crust are found below Soil and it is divided into tow Layers depend on Minerals consist it:-

10

1111Sima Layer

Sial Layer


Moho discontinuity

Earth Crust – sial and Sima Layer

Sial Layer:-It is the upper part of Earth crust .Its thickness between 2-15 km, Density about 2.8gm /cm3 .

Sail is consist of light colours Granitic Rocks ( Aluminium Silicate).

Sial Layer is thick at Land while it is thin or absent at Oceans.

Sima Layer:-It is the lower part of Earth Crust. Its thickness about 20-25 km, Density about 3.4gm /cm3 . Sima consist of Magnesium

Silicate. The upper part of this layer is Crystalline but the lower part is uncrystalline (classy texture).

Conrad Discontinuity:- Interference zone which is separated between Sial and Sima.

Sea Level

11

12

Earth Bottom

The Seismology:-The Seismology is good method to know the consists of Earth Bottom.

Moho (Yugoslavian Scientist) is the first one who notice Difference in Earth Layers by using the Primary and Secondary Waves.

The Waves behaviour are changed at depth about 35km, this means changes in properties of rocks Called Moho Discontinuity.

Moho Discontinuity:-it is an imaginary limited zone separated between earth crust and mantle at depth between 35-50 km

(depends on its position in different Continents).

Earth Mantle

The information about the mantle is get by geophysical methods, since the increasing of seismologic waves speed is leading to collection of

Ferric-magnesium which is mean dark colour rocks. Mantle thickness is about 2650 km.

Scientists are identified two Layers:-

Upper Layer (Peridotite):-The Density is about 3.4 gm/cm3 consist of Basic or Ultra basic Igneous Rocks with more Dark Colure.

Lower Layer (Pallasite):-It is consist of basic Minerals and Ferric Metals.

Earth Core (Centro Sphere)

The Thickness of Core is about 3600 km. The Core consist of Ferric about 90%, Nickel about 10%. Scientists collects information about the core of Earth by indirect methods by way of seismological waves and Meteor, meteorites analysis which

are fall on Land from time to time. The analysis of Meteor and Meteorites shows Ferric, Nickel and some Chromium and Cobalt Metals

Some Specialists divided Core of earth into:-

1- Outer Core (fusion). 2- Inner Core (Solid).

12

13

1- Crystal:- Crystal is Sold body, homogenous in chemical compound, particular by Crystalline Planes.

The Minerals are creation Naturally in Earth Crust by way of (crystallization).

Amorphous:- it is no crystalline minerals, unstable chemical compound , unstable crystalline building, without chemical Formula.

Uncrystalline or Glassy Materials without geometric arrangement are not minerals.

Usually minerals are combined together forming Rocks.

Some minerals are Native like Gold, Diamond, Silver, Sulphur, Cupper, Graphite and Platinum.

Conclusion:- The earth crust is consist of:-

1- Crystals.

2- Minerals.

3- Rocks.

Earth Crust Consists

The Oxygen percentage about 50% .It is not free, but chemically Combined with Another Elements

to form element oxides. Since Si is at second order, the expectation SiO2 is the most existence ,Then AlO, FeO CaO and so on. Usually more of Metallic oxide is combined with silicon oxide to form Silicate Materials like Potassium, Aluminium, Silicate(KAl2SiO8) and Magnesium, Silicate(MgSiO3).These minerals are Naturally Crystalline with out human made and named (Minerals). The Minerals are find in Nature as free or Minerals consist rocks. Minerals are creating from Atoms in Geometric Arrangement which is differentiate every one of Minerals.

O=46.60

Si=27.7

A=l8.10

Fe=5.00

Ca=3.60

Na=2.80

K=2.60

Mg=2.10

Others=1.5

100%

Average of Elements consists Earth Crust as Weight% are:-

13

14

Outer Properties Of Crystals

The properties of Crystal are depend on:-

1-Crystal Faces:-The Crystals have regular outer planes named (Crystal Faces) A .

2- Crystal Angles:- a-The angle between two neighbor faces is named (Edge Angle) B .

b-The angle between three neighbor faces is named (Solid Angle) C .

c-The angle between two faces is (Interfacial Angle), It can measured by two perpendicular columns on

neighbor and 0pp0site faces C .

3-Crystal Form:- It means groups of Crystals are similar in shape, Area and its Crystal situation. The Crystal can be form of one

shape of faces named (Simple Form) or many shapes named (Compound Form).

Outer Properties Of Crystals

The properties of Crystal are depend on:-

1-Crystal Faces:-The Crystals have regular outer planes named (Crystal Faces) A .

2- Crystal Angles:- a-The angle between two neighbor faces is named (Edge Angle) B .

b-The angle between three neighbor faces is named (Solid Angle) C .

c-The angle between two faces is (Interfacial Angle), It can measured by two perpendicular columns on

neighbor and 0pp0site faces C .

3-Crystal Form:- It means groups of Crystals are similar in shape, Area and its Crystal situation. The Crystal can be form of one

shape of faces named (Simple Form) or many shapes named (Compound Form).

Interfacial Angle

Face

B - Edges Angle C - Solid Angle

Closed Crystal

Open Crystal

Faces and angle of crystals

A B

CA - Faces

14

15

Elements Of Symmetry

1-Plane Of Symmetry:- Plane is divided the Crystal into equals half, each of half is mirror picture for other. This plane Is called

Plane of Symmetry.

1-Plane Of Symmetry:- Plane is divided the Crystal into equals half, each of half is mirror picture for other. This plane Is called

Plane of Symmetry.

1-Plane Of Symmetry

2-Axis Of Symmetry

3-Center Of Symmetry

4-Inversion Axis Of Symmetry

A-1

A-5

A-2

A-7

A-6

A-3BB

BB

C

C

C

C

Planes of symmetry in Sodium chloride Crystal (NaCl)

A

AA

A

4-Crystal Symmetry:- It means many of Faces, Edges and Angles are arranged around An Axis.

The Axis must be pass by Center of Crystal. This arrangements is called Crystal Symmetry. The Core of Symmetry is Repetition of this Faces, Edges and Angles many times according to constant Low.

A-4

15

16

2-AxisOf Symmetry

Axis:- It is an imaginary line pass by crystal center, that is means, If the crystal is rotated around this line (360 degree), face, edge and any line

will repeated twice or more.

2-AxisOf Symmetry

Axis:- It is an imaginary line pass by crystal center, that is means, If the crystal is rotated around this line (360 degree), face, edge and any line

will repeated twice or more.

3-fold axis (Triad) 2-fold axis (Diad) 4-fold axis (Tetrad) 6-fold axis (Hexad)

3-Center Of SymmetryIt is an imaginary, Central point into Crystal. The distance between faces , edges, and angles in certain side is equal to the other in opposite side.

4-Inversion Axis Of symmetry

This element collects between rotation symmetry and Inversion through the center of crystal . If the crystal has double inversion at rotation axis, it needs crystal rotation for(180 )firstly, then inversion every face, edge, or surface in crystal through symmetry center until the crystal takes its situation in vacancy. This Axis is called (Two-fold inversion) or(2). So for (3) , (4) and (6).

Extraction

Elements of symmetry are:- 1- Plane of symmetry. 2- Axis of symmetry. 3- Center of symmetry. 4- Inversion axis of symmetry.

16

17

Crystal Systems:- The Crystals are divided into two classes:-

A- Depend on the Axis lengths of Crystal and the Axial Angles between (α, β, γ ). B- Depend on the grad of Symmetry elements in the Crystal.

On the basis of (A and B) above, the Crystal systems divided into (seven-7) systems:-

1- Cubic System. 2-Tetragonal System. 3-Hexagonal System. 4-Trigonal System.

5-Orthorhombic System. 6-Monoclinic System. 7-Triclinic system.

c-

c+

b+b-

a-

a+Axial Cross

21

3

1,2,3-Axial Angles

1= α Angle2=β Angle3 =γ Angle

Crystallographic Axes

Crystallographic Axes are imaginary, three lines into Crystal, intersects at Crystal Center in point named (Axial Cross).

17

18

1-Cubic System A-Crystallographic axis 1-Three-Equals axis and Perpendicular on each others

B-Elements of Symmetry

1-Axis of Symmetry=13(3Tetrad-4 Triad-6 Diad).

2-Planes of Symmetry=9

3-Center of Symmetry=availab

1-Cubic System A-Crystallographic axis 1-Three-Equals axis and Perpendicular on each others

B-Elements of Symmetry

1-Axis of Symmetry=13(3Tetrad-4 Triad-6 Diad).

2-Planes of Symmetry=9

3-Center of Symmetry=availab

6 Diad

12-Face

a= b =c Mineral Crystals are:-1-Diamond-C 2-Halite- NaCl 3-Galena- PbS 4-Fluorite-CaF2

5-Garnet (Mg,Fe,Ca)3Si3O12(OH)6-Sodalite-Na8(Al6Si6O24)Cl2

a

b

c

a - b - cCrystallographic Axis

3 Tetrad

4 TriadConstruction unit

Sodalite Crystal

2-Tetragonal System A-Crystallographic Axis:-Three axis (two are equals, perpendicular on each other, while the third is longer or shorter and perpendicular on the

two equals Axis.

B-Elements Symmetry:- 1-Axis of Symmetry= 5 Axis(1-Tetrad,4-Diad). 2-Planes of Symmetry= 5 3-Center of Symmetry=available.

2-Tetragonal System A-Crystallographic Axis:-Three axis (two are equals, perpendicular on each other, while the third is longer or shorter and perpendicular on the

two equals Axis.

B-Elements Symmetry:- 1-Axis of Symmetry= 5 Axis(1-Tetrad,4-Diad). 2-Planes of Symmetry= 5 3-Center of Symmetry=available.

Mineral Crystals are:- 1-Zircon-ZrSiO4 2-Rutile-Tio2

3-Cassiterite- SnO4

90

90

Zircon CrystalConstruction Unit

Crystallographic Axis

A = b ≠ c

ab

c

c

o

18

19

3-Hexagonal System A-Crystallographic Axis:-Four Axis (Three are equal, The Angle between each two equal Axis is 120 . Fourth axis is Longer or

Shorter and perpendicular the plane of three equal Axis.

B-Elements of Symmetry:-

1-Axis of Symmetry= 7Axis(1-Hexad, 6-Diad).

2-Plane of Symmetry= 7

3-Center of Symmetry= available

3-Hexagonal System A-Crystallographic Axis:-Four Axis (Three are equal, The Angle between each two equal Axis is 120 . Fourth axis is Longer or

Shorter and perpendicular the plane of three equal Axis.

B-Elements of Symmetry:-

1-Axis of Symmetry= 7Axis(1-Hexad, 6-Diad).

2-Plane of Symmetry= 7

3-Center of Symmetry= available

Mineral Crystals are:- 1-Quartz- SiO2 2-Apatite-Ca5(PO4)3 (OH,F,Cl) 3-Nepheline-(Na3(Na,k)(Al4Si4)O16 4-Beryl

a

a

a

b

b

a=a=a≠b

Construction unit

�7-Axis

4-Trigonal System

The Trigonal system is like Hexagonal System except:- a-Three equal axis and fourth axis is longer or shorter. a-One Axis of Symmetry ( 1- Triad ). b-Non existence any horizontal planes of Symmetry.

Mineral Crystals are:- 1-Calcite- CaCO3 2-Corundum-Al2O3

3-Hematite-Fe2O3 4- Dolomite- (CaMg)CO3

4 axis

19

20

5- Orthorhombic System

A-Crystallographic Axis:- B-Elements of Symmetry:-

1- Three unequal Axis. 1- Axis of Symmetry = 3 (Diad).

2- The Axis are perpendicular 2- Planes of Symmetry = 3

each other. 3- Center of Symmetry=available.

5- Orthorhombic System


1- Three unequal Axis. 1- Axis of Symmetry = 3 (Diad).

2- The Axis are perpendicular 2- Planes of Symmetry = 3

each other. 3- Center of Symmetry=available.

ba

c

Crystallographic AxisConstruction Unit

a ≠ b ≠ c

Sulfur Crystal

S

Mineral Crystals are:- 1-Topaz-Al2(SiO4)(OH,F)2 2-Anhydrite-CaSO4 3-Sulfur – S 4-Andalusite-Al2SiO5 5-Olivine- (FeMg)SiO4 6-Barite-BaSO4

Anhydrite Crystal Caso4

20

21


1-Three unequal axis. 2-Two axis intersects (a and c) at oblique or inclined angle ( β ). 1-Axis of symmetry = 1 ( Diad )

3- Third axis (b) is perpendicular plane of (a and c axes). conformable with (b) Axis

2-Plane of symmetry = 1

pass by (a and c) Axis.

3-Center of symmetry =available.


1-Three unequal axis. 2-Two axis intersects (a and c) at oblique or inclined angle ( β ). 1-Axis of symmetry = 1 ( Diad )

3- Third axis (b) is perpendicular plane of (a and c axes). conformable with (b) Axis

2-Plane of symmetry = 1

pass by (a and c) Axis.

3-Center of symmetry =available.

C

b

a

β90�

Crystallographic Axis Construction UnitOrthoclase Crystal

A≠ b≠ c

:Mineral Crystals are-1-Orthoclase-KAlSi3O8

2-Gypsum-CaSO4 2H2O3-Mica-Si(K,Al,Fe,Mg)4O10OH4-Talc-Al4Si)8O20(OH)(4

5-Hornblende- (Ca,Mg,Fe,Al)(OH)2 (Si,Al)4O11

β

7-Triclinic System

A-Crystallographic Axis B- Element of Symmetry:-

1-Three unequal axis. 1-Axis of symmetry =absent

2-Unperpendicular axis. 2-Plane of symmetry =absent

3-Center of symmetry = available

7-Triclinic System

A-Crystallographic Axis B- Element of Symmetry:-

1-Three unequal axis. 1-Axis of symmetry =absent

2-Unperpendicular axis. 2-Plane of symmetry =absent

3-Center of symmetry = available

a

c

b

A ≠ b≠ cOblique Angle

Minerals Crystals are:-1-Albite - NaAlSi3O8

6-Anorthite-CaAl2Si2O8 Plagioclase:-(2-Oligoclase) (3-Andesene) (4-Labrodorite) (5-Bitonite)

6-Monoclinic System

21

22

The Minerals

Minerals:-It is natural substance, solid, homogenous with systematic atomic building with particular chemical compound. Minerals creation:-There are different sources and manner of minerals creation. The minerals study is important to understand minerals accumulation, economic metals and ores deposits. Minerals creation is divided into three sources:-

1- minerals creation of magma:- 1- Magma:-It is Fusion Rocks, Viscose, Dense, High Temperature for degree It is allow to Movement of Elements consist it. Magma is available sub earth crust. But when Magma is moving up at Earth Surface through cracks, Fishers or Volcanic activities, its fusion of Rocky is called - Lava

Most Minerals consist Earth crust are result of Magma or Lava Hardening.

The eight(8) Elements ( O, Si, Al, Fe, Mg, Ca, Na, k ) are compose about 99% of Magma. While Volatiles Materials (Wat Vap, CO2, Cl, F, S etc) are compose 1% .

1-Magma Hardening is start with:- A- Silicates Minerals. B- Oxides Minerals. C-Sulfides Minerals.

A- Silicate Minerals:- 1- Plagioclase (Na, Ca)AlS3iO8 2-Olivine (Fe, Mg)SiO4 3- Pyroxene (Ca, Al, Fe, Mg)Si2O6

4-Amphibole(Ca ,Al, Fe, Mg)Si8O22 5-Mica K,Al,Fe,Mg)(Si4O10)(OH) 6-Orthoclase KAlSi3O8 7-Quartz SiO2

B- Oxide Minerals:- 1-Magnetite Fe3O4 2-Chromite FeCr2O4 3-Hematite Fe2O3 4-Quartz SiO2

C- Sulfide Minerals:- 1-Galena PbS 2-Pyrite FeS2 3-Chalcppyrite CuFeS2

The Minerals

Minerals:-It is natural substance, solid, homogenous with systematic atomic building with particular chemical compound. Minerals creation:-There are different sources and manner of minerals creation. The minerals study is important to understand minerals accumulation, economic metals and ores deposits. Minerals creation is divided into three sources:-

1- minerals creation of magma:- 1- Magma:-It is Fusion Rocks, Viscose, Dense, High Temperature for degree It is allow to Movement of Elements consist it. Magma is available sub earth crust. But when Magma is moving up at Earth Surface through cracks, Fishers or Volcanic activities, its fusion of Rocky is called - Lava

Most Minerals consist Earth crust are result of Magma or Lava Hardening.

The eight(8) Elements ( O, Si, Al, Fe, Mg, Ca, Na, k ) are compose about 99% of Magma. While Volatiles Materials (Wat Vap, CO2, Cl, F, S etc) are compose 1% .

1-Magma Hardening is start with:- A- Silicates Minerals. B- Oxides Minerals. C-Sulfides Minerals.

A- Silicate Minerals:- 1- Plagioclase (Na, Ca)AlS3iO8 2-Olivine (Fe, Mg)SiO4 3- Pyroxene (Ca, Al, Fe, Mg)Si2O6

4-Amphibole(Ca ,Al, Fe, Mg)Si8O22 5-Mica K,Al,Fe,Mg)(Si4O10)(OH) 6-Orthoclase KAlSi3O8 7-Quartz SiO2

B- Oxide Minerals:- 1-Magnetite Fe3O4 2-Chromite FeCr2O4 3-Hematite Fe2O3 4-Quartz SiO2

C- Sulfide Minerals:- 1-Galena PbS 2-Pyrite FeS2 3-Chalcppyrite CuFeS2

22

23

2-Minerals creation of solutions:- Solutions divided into:- A-Surface solutions. B-Underground Solutions.

A- Surface Solution:-Oceans, Seas, (Saline Water) Lakes, and Rivers.1- Evaporation of Solutions (High T) = Crystalline Minerals. (Depend on Solubility Product of Ions which is consist Minerals).

CaCO3 MgCO3

K2CO3

Na2CO3

CaSO4 MgSO4 k2SO4 Na2SO4 CaCl2

MgCl2

KCl NaCl

2-Minerals creation of solutions:- Solutions divided into:- A-Surface solutions. B-Underground Solutions.

A- Surface Solution:-Oceans, Seas, (Saline Water) Lakes, and Rivers.1- Evaporation of Solutions (High T) = Crystalline Minerals. (Depend on Solubility Product of Ions which is consist Minerals).

CaCO3 MgCO3

K2CO3

Na2CO3

CaSO4 MgSO4 k2SO4 Na2SO4 CaCl2

MgCl2

KCl NaCl

2- Exchange Reaction Between Solutions:- Sometimes Two solutions to be opposite , So reaction together, resulting specialist Minerals:- CaSO4+BaCO3 CaCO3(Calcite) + BaSO4 (Barite)

3-Creatures Affected On Solutions:-Some Animals and Plants in Seas Extracts certain dissolved Ions to Build their Skeleton, Bone, Shell :- a-Coral-Extracts CaCO3-Building Oyster, Sponges, Shells. b- Foraminifera - Extracts Si –Shell Building. c- Bacteria – Absorbed Fe and S oxides. All these Creations after Dead may be consist a create quantities of detriatal sediments in Sea Floor.

Crystalline Minerals (Evaporative Salts)

B-Under ground SolutionsThe underground Solutions divided into:-

1-Hydrothermal Solutions:- This Solutions are remaining of Magma Crystallization, very hot, high pressure and saturated with dissolved Oxides, Sulfides, Carbonate and so on. It is moving up faraway from its source through deep zones of Earth crust. During that It loss the temperature and pressure gradually resulting hydrothermal Deposits which are divided into three type depend on Temperature and Pressure.

a-Hypothermal Deposits:- 500 - 300 C High pressure(deep zone) example

-Wolframite (Fe,Mn)WO4 -Molybdenite MoS2 -Cassiterite SnO2

b-Mesothermal Deposits :- 300 – 200 C Medium Pressure (Medium zone) example

-Calcite CaCO3 -Barite BaSO4 -Galena PbS -Sphalerite ZnS

C-Epithermal Deposits:- 50 – 0 C Low Pressure (shallow zone) example

-Quartz SiO2 -Calcite CaCO3 -Stibnite SbS2 -Opal Sio2 -Cinnabar HgS Flourite CaF2 Marcasite fes2

B-Under ground SolutionsThe underground Solutions divided into:-

1-Hydrothermal Solutions:- This Solutions are remaining of Magma Crystallization, very hot, high pressure and saturated with dissolved Oxides, Sulfides, Carbonate and so on. It is moving up faraway from its source through deep zones of Earth crust. During that It loss the temperature and pressure gradually resulting hydrothermal Deposits which are divided into three type depend on Temperature and Pressure.

a-Hypothermal Deposits:- 500 - 300 C High pressure(deep zone) example

-Wolframite (Fe,Mn)WO4 -Molybdenite MoS2 -Cassiterite SnO2

b-Mesothermal Deposits :- 300 – 200 C Medium Pressure (Medium zone) example

-Calcite CaCO3 -Barite BaSO4 -Galena PbS -Sphalerite ZnS

C-Epithermal Deposits:- 50 – 0 C Low Pressure (shallow zone) example

-Quartz SiO2 -Calcite CaCO3 -Stibnite SbS2 -Opal Sio2 -Cinnabar HgS Flourite CaF2 Marcasite fes2

Solu

bilit

y P

rodu

ct

23

24

2-Evaporation of Assistant Dissolved Gas

Underground Solutions contains dissolved CO2 Gas as a result of Rainfall.

This is result H2CO3 (weak Carbonic Acid), Which is dissolved Limestone and to form Calcium Bicarbonate Ca (HCO3)2.The later is

Chemically unstable. So It is escape CO2 Gas and come back to Calcium Carbonate.

CaCO3+H2O+CO2 Ca(HCO3)2 (Deposited Calcium Bicarbonate) (1)

Ca(HCO3)2 CO2+H2O+CaCO3 (Deposited Calcite) (2)

This phenomena is clear in Rainy, Cavities and Limestone Regions, Since Limestone is Deposit in Conical Shape as above

Equation, Named:- Stalactite and Stalagmite.

24

Hot Spring

Travertine CaCO3

Cave

Mountain

Stalactite

Stalagmite

Hot Body

Water Table

Aquifer

24

25

3-Minerals Creation of Gases

After Minerals Crystallization of Magma and Minerals Deposition of Hydrothermal Solutions, The remaining Solution ( 1% 0f Magma) becomes enrichment with Volatiles and Gases ( Water Vapor, Cl, CO2, F, S, B ) The later try to escape from Magma under suitable conditions like Pressure decreasing through Joints, Faults and rock pores. The Volatiles and Gases may be Reacted together or with surrounding different Rocks to form a new Minerals

NEW MINERALS:-

Volatile Compound) SnF2 + 2H2O (Cassiterite) SnO2 + 4HF

Some times, Limestone affected by Hydrofluoric Acid (HF)

4HF + 2CaCO3 (Fluorite)2CaF2 + 2H2O + 2CO2

Another Minerals:- Tourmaline (Sl,B,Al,Fe,Mg,Na,O) Solution Rich Boron

Topaz Al2(SiO4)C(F, OH)2 Solution Rich Floured

When the Gases are near Earth Surface, they are try to escape through Volcanic Activities to form Sulfur S, Halite NaCl etc

3-Minerals Creation of Gases

After Minerals Crystallization of Magma and Minerals Deposition of Hydrothermal Solutions, The remaining Solution ( 1% 0f Magma) becomes enrichment with Volatiles and Gases ( Water Vapor, Cl, CO2, F, S, B ) The later try to escape from Magma under suitable conditions like Pressure decreasing through Joints, Faults and rock pores. The Volatiles and Gases may be Reacted together or with surrounding different Rocks to form a new Minerals

NEW MINERALS:-

Volatile Compound) SnF2 + 2H2O (Cassiterite) SnO2 + 4HF

Some times, Limestone affected by Hydrofluoric Acid (HF)

4HF + 2CaCO3 (Fluorite)2CaF2 + 2H2O + 2CO2

Another Minerals:- Tourmaline (Sl,B,Al,Fe,Mg,Na,O) Solution Rich Boron

Topaz Al2(SiO4)C(F, OH)2 Solution Rich Floured

When the Gases are near Earth Surface, they are try to escape through Volcanic Activities to form Sulfur S, Halite NaCl etc

25

2626

Minerals Creation Of Gas

Minerals Creation Of Solutions Minerals Creation Of Magma

A-VolatilesCassiterite (SnO2)

B-Another Minerals Tourmaline – Topaz

C-Through Volcanic S - NaCl

A-Surface Solutions (Oceans, Seas, Lakes):- 1-Crystalline Minerals (Evaporation) Calcite(CaCO3) Gypsum(CaSO4)2H2O

2-Exchage Reaction (Special Minerals) Barite(BaSO4)

3-Creature Affected 1-Coral (Extract – CaCO3) 2-Foraminefra (Extract – Si) 3-Bacteria (Absorbed –Fe – S)

B-Underground Solution:- 1-Hydrothermal Solutions

a-Hypothermal Solutions (Walframi Fe,Mn)WO4 - Cassiterite (SnO4)

b-Mesothermal Solutions Galena- PbS – Sphalarite – ZnS

c-Epithermal Solutions Quartz- SiO2 – Cinnabar- FeS2

2-Evaporation Of Assistant Dissolved Gas Stalactite – Stalagmite CaCO3

A-Magma Hardening:-

1-Sillicate Minerals Plagioclase(Na-Ca)AlSi3O8 Olivine(Fe- Mg)SiO4 Quartz(SiO2 – Mica

2-Oxide Minerals

Magnetite(Fe3O4) Chromite(FeCr2)O4

3-Sulfide Minerals

Galena (PbS) – Pyrite(FeS2)

B.-Lava Hardening. Obsidian (Complex Rocks)

26

27

A-Physical Properties of Minerals

It Means the Natural Properties of Minerals which is divided into:-

1-0ptical Properties:- Include Properties depend on Light such as Color, Play of Colors, Luminescence, Streak, Transparency, Luster, Tarnish.

2-Cohesive Properties:- Depend on Cohesion and Strength of Minerals such as Hardness, Cleavage, Parting and Fracture.

3-Electrical and Magnetic Properties:- Like Pyroelectricity, Piezoelectricity, Paramagnetic, Diamagnetic.

4-Specefic Gravity.

5-Thermal Properties:- Like Fusion Degree.

6-Sense properties:- Depend on Senses like Taste, Perfume and Contact.

A-Physical Properties of Minerals

It Means the Natural Properties of Minerals which is divided into:-

1-0ptical Properties:- Include Properties depend on Light such as Color, Play of Colors, Luminescence, Streak, Transparency, Luster, Tarnish.

2-Cohesive Properties:- Depend on Cohesion and Strength of Minerals such as Hardness, Cleavage, Parting and Fracture.

3-Electrical and Magnetic Properties:- Like Pyroelectricity, Piezoelectricity, Paramagnetic, Diamagnetic.

4-Specefic Gravity.

5-Thermal Properties:- Like Fusion Degree.

6-Sense properties:- Depend on Senses like Taste, Perfume and Contact.

1- Optical Properties

A-Color:- It is the first physical properties which is noticed in the Field, so it can be divided into.

1-Constant Colors:- Gold and Sulfur (Metallic yellow), Malachite (Green) Cinnabar (Red).

2-Variable Colors:- Pure Quartz (Transparent), Impure Quartz (Rose, Smoky).

B-Play of Colors:- Some Minerals have different Colors through rotated it, because of light scattering, So Diamond is Good example. Another

Mineral show Silky Waves with rotation like Satin spar (one type of Gypsum).

C-Luminescence:- Some Minerals gives Light Radiation when it subject to Heat, X rays, Ultraviolent Rays, Fraction and Electrical Energy. The

light Radiation Color is different of the Mineral Color. When Radiation disappears with affected stopping the phenomena is

called (Fluorescence) Which is derive from Fluorite Minerals (CaF2). If Radiation Color stays during affected stopping,

Phenomena is called (Phosphorescence).

D-Streak:- It is Mineral Powder resulting from fraction on Streak Plane. Many Minerals have Streak Color different of Original Color, Such as

Pyrite(FeS2) is Yellow, while its Streak is Black. Chromite Mineral is Black Color, While the Streak is Brown color.

1- Optical Properties

A-Color:- It is the first physical properties which is noticed in the Field, so it can be divided into.

1-Constant Colors:- Gold and Sulfur (Metallic yellow), Malachite (Green) Cinnabar (Red).

2-Variable Colors:- Pure Quartz (Transparent), Impure Quartz (Rose, Smoky).

B-Play of Colors:- Some Minerals have different Colors through rotated it, because of light scattering, So Diamond is Good example. Another

Mineral show Silky Waves with rotation like Satin spar (one type of Gypsum).

C-Luminescence:- Some Minerals gives Light Radiation when it subject to Heat, X rays, Ultraviolent Rays, Fraction and Electrical Energy. The

light Radiation Color is different of the Mineral Color. When Radiation disappears with affected stopping the phenomena is

called (Fluorescence) Which is derive from Fluorite Minerals (CaF2). If Radiation Color stays during affected stopping,

Phenomena is called (Phosphorescence).

D-Streak:- It is Mineral Powder resulting from fraction on Streak Plane. Many Minerals have Streak Color different of Original Color, Such as

Pyrite(FeS2) is Yellow, while its Streak is Black. Chromite Mineral is Black Color, While the Streak is Brown color.

E-Transparency:- It is depend on mineral ability to pass light such as:-. 1-Galena, Gold, Pyrite are Opaque Minerals. 2-Pure Quartz, calcite, Gypsum layers are Semi Transparence. 3-Pure Muscovite is Transparence.F-Luster:-This optical property depends on amount and kind of reflected light on Minerals. 1-Metalic luster--Gold , Silver , Galena , Pyrite. 2-Nonmetalic Luster:- 1-Glassy Luster – Likes normal Glass. 2-Adamantine – likes Diamond luster. 3-Pearly Luster, like Pearl luster – Talc and Mica minerals. 4-Silky Luster, One of Gypsum Kinds. 5-Earthy Luster, Likes Clay minerals Kaolin.G-Tarnish:-Some minerals have different COLORS on mineral surface, as a result of outer layer analysis such as, Cupper, Bornite minerals.

Notice:- In tarnish case the original color is found only at new broken of mineral surface.

E-Transparency:- It is depend on mineral ability to pass light such as:-. 1-Galena, Gold, Pyrite are Opaque Minerals. 2-Pure Quartz, calcite, Gypsum layers are Semi Transparence. 3-Pure Muscovite is Transparence.F-Luster:-This optical property depends on amount and kind of reflected light on Minerals. 1-Metalic luster--Gold , Silver , Galena , Pyrite. 2-Nonmetalic Luster:- 1-Glassy Luster – Likes normal Glass. 2-Adamantine – likes Diamond luster. 3-Pearly Luster, like Pearl luster – Talc and Mica minerals. 4-Silky Luster, One of Gypsum Kinds. 5-Earthy Luster, Likes Clay minerals Kaolin.G-Tarnish:-Some minerals have different COLORS on mineral surface, as a result of outer layer analysis such as, Cupper, Bornite minerals.

Notice:- In tarnish case the original color is found only at new broken of mineral surface.27

28

2-Cohesive The Cohesive Properties are Depend On Cohesion and Mineral Elasticity, Which is result of Ionic arrangement Strength. It is divided into:-

A -Hardness:- It is a degree of Mineral Resistance for Scratch, Scrape, fragment and Corrosion. Moh s Scale of Hardness

1-Talc Al4(Si8O20)(OH)4 Human skin

2-Gypsum CaSO4 2(H2O)

3-Calcite CaCO3 Finger nail

4-Flourite CaF2

5-Apatite Ca5(Po3)4(OH,F,Cl) Kitchen knife

6-Orthoclase KAlSi3O8 Window Glass 7-Quartz SiO2

8-Topaz Al2(SiO4)C(F,OH)2 Steel File

9-Corundum Al2O3 (Yakut in Arabic)

10-Diamond C

2-Cohesive The Cohesive Properties are Depend On Cohesion and Mineral Elasticity, Which is result of Ionic arrangement Strength. It is divided into:-

A -Hardness:- It is a degree of Mineral Resistance for Scratch, Scrape, fragment and Corrosion. Moh s Scale of Hardness

1-Talc Al4(Si8O20)(OH)4 Human skin

2-Gypsum CaSO4 2(H2O)

3-Calcite CaCO3 Finger nail

4-Flourite CaF2

5-Apatite Ca5(Po3)4(OH,F,Cl) Kitchen knife

6-Orthoclase KAlSi3O8 Window Glass 7-Quartz SiO2

8-Topaz Al2(SiO4)C(F,OH)2 Steel File

9-Corundum Al2O3 (Yakut in Arabic)

10-Diamond C

B-Cleavage:-Many Minerals are easy cleave in systematic directions named (cleavage Planes) the Later is always parallel to Mineral Crystal face at weak point.

C-Parting:-Likes Cleavage but it is in depend on Mineral Crystal Face or Weak point, So it is a result of outer Natural factors after Minerals Consisting like Pressure and Tension.

D-Fracture:- It is a Mineral Surface Shape which is result of mineral broken at non cleavage Plane. So there are many types of Fracture

Planes like Conchoidal, Flat,Unflat, Toothed, Earthy.

B-Cleavage:-Many Minerals are easy cleave in systematic directions named (cleavage Planes) the Later is always parallel to Mineral Crystal face at weak point.

C-Parting:-Likes Cleavage but it is in depend on Mineral Crystal Face or Weak point, So it is a result of outer Natural factors after Minerals Consisting like Pressure and Tension.

D-Fracture:- It is a Mineral Surface Shape which is result of mineral broken at non cleavage Plane. So there are many types of Fracture

Planes like Conchoidal, Flat,Unflat, Toothed, Earthy.

28

29

3-Electrical and Magnetic Properties

A- Electrical properties:-1- Some minerals are good electric conductor like Graphite (C), some of oxides minerals (Hematite - Fe2O3) and

Sulfide Minerals (Galena – PbS).

2-Most Minerals are bad or Non Electric Conductor.

3-Some Minerals becomes charged with Electricity in case of Heating. This phenomena called (Pyroelectricity). Tourmaline Mineral is good

example which is use in temperature Measurement result from Bombs Explosion.

4-Quartz Mineral is charged with Electricity under direct Pressure (Piezoelectricity). It is useful phenomena for Industry of Radio and

wireless Instruments.

B-Magnetic Properties

Some Minerals have ability to pull a magnet while another's are Repulsive a Magnet.

A- Paramagnetic Minerals:- It is the Minerals which are Pull or Attractive Magnet like Magnetite (Fe3O4) – Hematite (Fe2O3)

B-Diamagnetic Minerals:- It is the Minerals which are Repulsive a Magnet like Quartz (SiO2) – Calcite(CaCO3) – Zircon(ZrSiO4) .

These Properties are used in Geophysical Explorations for some Metallic Ore Deposits like Fe, Ni Ores.

4-Specific Gravity:-

Mineral Weight in Air

Specific Gravity = X Solution Density

Mineral Weight in Air – Mineral Weight in Solution

Specific Gravity is constant for the minerals at constant temperature and chemical condition.

.

B-Magnetic Properties

Some Minerals have ability to pull a magnet while another's are Repulsive a Magnet.

A- Paramagnetic Minerals:- It is the Minerals which are Pull or Attractive Magnet like Magnetite (Fe3O4) – Hematite (Fe2O3)

B-Diamagnetic Minerals:- It is the Minerals which are Repulsive a Magnet like Quartz (SiO2) – Calcite(CaCO3) – Zircon(ZrSiO4) .

These Properties are used in Geophysical Explorations for some Metallic Ore Deposits like Fe, Ni Ores.

4-Specific Gravity:-

Mineral Weight in Air

Specific Gravity = X Solution Density

Mineral Weight in Air – Mineral Weight in Solution

Specific Gravity is constant for the minerals at constant temperature and chemical condition.

. 29

30

5- Thermal Properties:- Fusion is The Important Property to identified Minerals Which have different Fusion Temperature as:-

(Stepenite - 525C) (Halite – 800C) (Silver – 960C) (Gold – 1062C) (Quartz – 1650 1700C) (Platinum – 1755C).

Some Minerals change directly to Gas with out pass in Fusion state like Arsenic

6-Sense Properties:- This Property is depend on Many Senses like Feel or Tough, Taste and Perfume as:-

1-Talc Mineral Al4(Si8O20)(OH)4 Fatty or Soapy Tough.

2-Halite Mineral NaCl Salty Taste.

3-Pyrite Mineral FeS2 With Heating – Sulfur perfume.

5- Thermal Properties:- Fusion is The Important Property to identified Minerals Which have different Fusion Temperature as:-

(Stepenite - 525C) (Halite – 800C) (Silver – 960C) (Gold – 1062C) (Quartz – 1650 1700C) (Platinum – 1755C).

Some Minerals change directly to Gas with out pass in Fusion state like Arsenic

6-Sense Properties:- This Property is depend on Many Senses like Feel or Tough, Taste and Perfume as:-

1-Talc Mineral Al4(Si8O20)(OH)4 Fatty or Soapy Tough.

2-Halite Mineral NaCl Salty Taste.

3-Pyrite Mineral FeS2 With Heating – Sulfur perfume.

B-Chemical properties of Minerals The Minerals are Consist of (Major Elements – High Percentage) and (Trace Elements – Very Low Percentage). The Detection of Minerals Composition are by Methods of:-

A-Qualitative Method:- It is Quick method to detects major elements by Flame Color which is reflect Element Type.

B- Quantitative Method:-It Means Detection the Percentage of Elements which are Consist Minerals by many Physical and Chemical methods:-

1-Chemical Methods:-

a-Volumetric Method. b-Gravimetric Method.

2-Phsical Methods:- a-Spectrographic Method. b-X – Ray Fluorescence. c-Electron Microprobe.

B-Chemical properties of Minerals The Minerals are Consist of (Major Elements – High Percentage) and (Trace Elements – Very Low Percentage). The Detection of Minerals Composition are by Methods of:-


B- Quantitative Method:-It Means Detection the Percentage of Elements which are Consist Minerals by many Physical and Chemical methods:-

1-Chemical Methods:-

a-Volumetric Method. b-Gravimetric Method.


30

31

B-Chemical properties of Minerals

The Minerals are Consist of (Major Elements – High Percentage) and (Trace Elements – Very Low Percentage). The Detection of Minerals Composition are by Methods of:-


B- Quantitative Method:-It Means detection the percentage of elements which are consist minerals by many physical and chemical methods:-

1-Chemical Methods:- a -Volumetric Method. b-Gravimetric Method.


B-Chemical properties of Minerals

The Minerals are Consist of (Major Elements – High Percentage) and (Trace Elements – Very Low Percentage). The Detection of Minerals Composition are by Methods of:-


B- Quantitative Method:-It Means detection the percentage of elements which are consist minerals by many physical and chemical methods:-

1-Chemical Methods:- a -Volumetric Method. b-Gravimetric Method.


Crystal Chemistry of Minerals

It is depend on relationship between chemical composition and atomic building for mineral. The crystal chemistry science is divided into:-

1-Co – Ordination Number. 2-Chemical Bonds.

3-Polymorphism. 4-Isomorphism. 5-Pseudomorphism.

The First and Second Properties (1 – 2) are study at Inorganic Physical Chemistry while others ( 3 – 4 - 5 ) are Explain now:-

3-Polymorphism:- It Means More of one Crystal Shape are Crystallized from Same Substance, such as Diamond and Graphite are

Consist of Carbone ( C ) but Diamond is Crystallized in Cubic System, While Graphite is Crystallized in Hexagonal System, So there are

difference in all Physical Properties like Colors , Hardness and Specific Gravity. Calcite and Aragonite are Consist of CaCO3 (Calcite (Trigonal) (Aragonite – Orthorhombic). Quartz and Tredemite are consist of SiO2 (Quartz – Trigonal), (Tredemite – Orthorhombic).

Note:-Two Minerals are Similar named Dimorphism, Three Are Trimorphism etc.

Crystal Chemistry of Minerals

It is depend on relationship between chemical composition and atomic building for mineral. The crystal chemistry science is divided into:-

1-Co – Ordination Number. 2-Chemical Bonds.

3-Polymorphism. 4-Isomorphism. 5-Pseudomorphism.

The First and Second Properties (1 – 2) are study at Inorganic Physical Chemistry while others ( 3 – 4 - 5 ) are Explain now:-

3-Polymorphism:- It Means More of one Crystal Shape are Crystallized from Same Substance, such as Diamond and Graphite are

Consist of Carbone ( C ) but Diamond is Crystallized in Cubic System, While Graphite is Crystallized in Hexagonal System, So there are

difference in all Physical Properties like Colors , Hardness and Specific Gravity. Calcite and Aragonite are Consist of CaCO3 (Calcite (Trigonal) (Aragonite – Orthorhombic). Quartz and Tredemite are consist of SiO2 (Quartz – Trigonal), (Tredemite – Orthorhombic).

Note:-Two Minerals are Similar named Dimorphism, Three Are Trimorphism etc.

31

32

4-Isomorphism:-It means two minerals are different in chemical composition and similar in crystal shape. It is series of minerals which is create through replacement between two atoms almost are equals radius like sodium (Na) and calcium (Ca) to consist a Plagioclase Series. It Crystallized in Triclinic system.

Plagioclase Series is different in chemical composition, So it has graduation of physical properties at two end sides.

5-Pseudomorphism:- It means mineral has constant atomic building and chemical composition while its outer shape like another mineral

such as Pyrite(FeS2) may be change to the Gothite Mineral(FeO2) but the later is still has the same outer shape of Pyrite.

4-Isomorphism:-It means two minerals are different in chemical composition and similar in crystal shape. It is series of minerals which is create through replacement between two atoms almost are equals radius like sodium (Na) and calcium (Ca) to consist a Plagioclase Series. It Crystallized in Triclinic system.

Plagioclase Series is different in chemical composition, So it has graduation of physical properties at two end sides.

5-Pseudomorphism:- It means mineral has constant atomic building and chemical composition while its outer shape like another mineral

such as Pyrite(FeS2) may be change to the Gothite Mineral(FeO2) but the later is still has the same outer shape of Pyrite.

Plagioclase Series Albite % Anorthite %

1-Albite 2-Oligoclase 3-Andesine 4-Labrodorite 5-Betonite 6-Anorthite

100 - 90 90 – 70 70 – 50 50 – 30 30 – 10 10 - 0

0 -10 10 – 30 30 – 50 50 -70 70 – 90 90 - 100

NaAlSi3O8

CaAl2SI2O8

Classification of Minerals:-There are many kinds of Classification:-

A-Economic Classification :- It depend on Economic Value of Mineral like Diamond, Gold, Platinum and Silver, Cupper and Lead, Zinc.

B-Crystal Chemistry:-like Chemical Bonds, Co-Ordination Number and Isomorphism.C-Similar Basic Ions:-Depend on Basic Ions Consist Minerals such as:- 1-Minerals Group contains Iron (Fe):- (Hematite-Fe2O3) (Magnetite Fe3O4) (Pyrite-FeS2) (Limonite-FeO(OH)nH2O. 2-Minerals Group contains Cupper (Cu):- (Chalcopyrite-CuFeS2) (Borenite- Cu5FeS4) (Anargite-Cu3AsS4) (Chalcosite Cu2S). 3-Minerals Group contain Lead (Pb):- (Galena-PbS)

4- The best Classification for Minerals is depend on (Kind of Acidic Ions) of J.D.Dana an American Scientist, So Minerals are Classify

into Oxides, Sulphates, carbonates, Phosphates etc.

Note:-More than 2000 Minerals are Known yet.

Classification of Minerals:-There are many kinds of Classification:-

A-Economic Classification :- It depend on Economic Value of Mineral like Diamond, Gold, Platinum and Silver, Cupper and Lead, Zinc.

B-Crystal Chemistry:-like Chemical Bonds, Co-Ordination Number and Isomorphism.C-Similar Basic Ions:-Depend on Basic Ions Consist Minerals such as:- 1-Minerals Group contains Iron (Fe):- (Hematite-Fe2O3) (Magnetite Fe3O4) (Pyrite-FeS2) (Limonite-FeO(OH)nH2O. 2-Minerals Group contains Cupper (Cu):- (Chalcopyrite-CuFeS2) (Borenite- Cu5FeS4) (Anargite-Cu3AsS4) (Chalcosite Cu2S). 3-Minerals Group contain Lead (Pb):- (Galena-PbS)

4- The best Classification for Minerals is depend on (Kind of Acidic Ions) of J.D.Dana an American Scientist, So Minerals are Classify

into Oxides, Sulphates, carbonates, Phosphates etc.

Note:-More than 2000 Minerals are Known yet.

32

33

J.D.Dana Classification of Minerals

1-Native Elements (Minerals) Group:- a-Metallic Minerals:- Gold Au Platinum Pt Cupper Cu Silver Ag.

b-Semi Metallic Minerals:- Bismuth Bi Arsenic As c-Nonmetallic Minerals:- Diamond C Graphite C Sulfur S .

2-Sulfide Minerals Group:- Galena PbS Pyrite FeS2 Chalcopyrite CuFeS Sphalerite ZnS Marcasite FeS2 Arsenopyrite FeAsS Mobidnite MoS2 .

3-Oxides and Hydroxides Minerals Group:- a-Oxides (Anhydrous):- Corundum Al2O3 Hematite Fe2O3 MagnetiteFe3O4

b-Oxides (Hydrous):- Limonite FeO.OH.nH2O Opal SiO2.nH2O . b-Hydroxides:- Gibbsite Al(OH)2 Brosite Mg(OH)2 .

4- Halides Minerals Group:- Halite NaCl Fluorite CaF2 Atacamite Cu2(OH)8.

J.D.Dana Classification of Minerals

1-Native Elements (Minerals) Group:- a-Metallic Minerals:- Gold Au Platinum Pt Cupper Cu Silver Ag.

b-Semi Metallic Minerals:- Bismuth Bi Arsenic As c-Nonmetallic Minerals:- Diamond C Graphite C Sulfur S .

2-Sulfide Minerals Group:- Galena PbS Pyrite FeS2 Chalcopyrite CuFeS Sphalerite ZnS Marcasite FeS2 Arsenopyrite FeAsS Mobidnite MoS2 .

3-Oxides and Hydroxides Minerals Group:- a-Oxides (Anhydrous):- Corundum Al2O3 Hematite Fe2O3 MagnetiteFe3O4

b-Oxides (Hydrous):- Limonite FeO.OH.nH2O Opal SiO2.nH2O . b-Hydroxides:- Gibbsite Al(OH)2 Brosite Mg(OH)2 .

4- Halides Minerals Group:- Halite NaCl Fluorite CaF2 Atacamite Cu2(OH)8.

5-Carbonate Minerals Group:- Calcite CaCO3 Dolomite CaMg(CO3) Aragonite CaCO3 Magnesite MgCO3 Weatherite BaCO3

6-Sulphate Minerals Group:- a- Anhydrous:- Anhydrite CaSO4 Barite BaSO4 Selestite SrSO4 .

b-Hydrous:- Gypsum CaSO42H2O Malanterite FeSO47H2O .

7-Phosphate Minerals Group:- Apatite Ca5(F,Cl,OH)(PO4)3 . Monosite (Ce,La,Th)PO4 Vanadenite Pb5Cl(AsVO4)3 .

8-Silicat Minerals Group:- It is the Biggest Group (consists about 90% of Earth Crust). Olivine (Fe,Mg) SiO2 Hemomorphite Zn4(Si2O7)(OH)2.H2O Wilstonite CaSiO3 Beryl Be3AlSi6O18 Anstatite Mg2Si2O6

Tromolite Ca2Mg3Si8O22(OH)2 Muscovite KAl2(AlSi2O10)(OH)2 Clay Minerals (about – 120 Minerals) Talc (Si4O10)(OH)2

Quartz SiO2 Orthoclase KAlSi3O8 Plagioclase (Na,Ca)Al2Si3O8

5-Carbonate Minerals Group:- Calcite CaCO3 Dolomite CaMg(CO3) Aragonite CaCO3 Magnesite MgCO3 Weatherite BaCO3

6-Sulphate Minerals Group:- a- Anhydrous:- Anhydrite CaSO4 Barite BaSO4 Selestite SrSO4 .

b-Hydrous:- Gypsum CaSO42H2O Malanterite FeSO47H2O .

7-Phosphate Minerals Group:- Apatite Ca5(F,Cl,OH)(PO4)3 . Monosite (Ce,La,Th)PO4 Vanadenite Pb5Cl(AsVO4)3 .

8-Silicat Minerals Group:- It is the Biggest Group (consists about 90% of Earth Crust). Olivine (Fe,Mg) SiO2 Hemomorphite Zn4(Si2O7)(OH)2.H2O Wilstonite CaSiO3 Beryl Be3AlSi6O18 Anstatite Mg2Si2O6

Tromolite Ca2Mg3Si8O22(OH)2 Muscovite KAl2(AlSi2O10)(OH)2 Clay Minerals (about – 120 Minerals) Talc (Si4O10)(OH)2

Quartz SiO2 Orthoclase KAlSi3O8 Plagioclase (Na,Ca)Al2Si3O8

33

34

ROCKS

Rocks:- It is a Solid substance Consist of one Mineral or Mixture of Minerals.

Earth crust is Consist of:- 1-Igneous Rocks. 2-Sedimentary Rocks. 3-Metamorphic Rocks.

ROCKS

Rocks:- It is a Solid substance Consist of one Mineral or Mixture of Minerals.

Earth crust is Consist of:- 1-Igneous Rocks. 2-Sedimentary Rocks. 3-Metamorphic Rocks.

Igne

ous

Ro

cks

Weathering-ErosionTransportation

Sediments

Lithification

Sedimentary

R

ocks

Met

amor

phis

m

Metam

orphic

Rocks Rocks Cycle

MagmaFusion Crystallization

34

35

Oxi

des

16

12

8

4 50 55 60 65 70

Al2O3

SiO2

Na2OMgO

CaO

1- The right part of a side figure( 1 )is show Rocks Rich in Si,Al,Na,K which means Rocks contains (Orthoclase KAlSi3O8), (Plagioclase rich in sodium NaAlSi3O8) with little of Ca Plagioclase named (Acidic Rocks) which are light color and low density. The excess of SiO2 is forming Quartz (with very little of ferromagnesium minerals). 2-The Rocks at Wright figure( 2 ) are rich In Ca,Mg, and Fe but they are poor in K,Na and relatively in Si, So this means rocks contains (Plagioclase rich in calcium CaAl2Si2O8), (ferro magnesium minerals, olivine (Fe, Mg)2SiO4

, Pyroxene group like Augite(Ca(Mg,Fe,Al)AlSi2O6) No Quartz. This rocks named (Basic Rocks) which are blackish color and high density. 3- zone between 1and 2 are (Inter mediate Rocks) which are represent mixed of 1 and 2 Rocks. 4-Ultrabasic Rocks.

12 34

C-Melt Crystallization:-There are relationship between SiO2% and other oxides:- Increasing of Na2O and K2O increasing SiO2

Decreasing of CaO, MgO and FeO

No relationship with Al2O3

K2O

FeO+Fe2O3

1-Igneous Rocks

It is create by Rocky Melting Harding with high temperature. (It named Primary Rocks because of all the Rocks are derive from it).

-Magma:- When Harding is below earth surface.

-Lava:- When Harding is over earth surface. A-Properties of Igneous Rocks:-

1-In general it is crystalline rocks.

2-It is not contain Fossils.

3-No indication of strata shape.

B-Chemical and Mineral Composition of Igneous Rocks Oxides Percentage%

1-Sio2 40-752-Al2O3 10-203-FeO 1-104-Fe2O3 1-105-MgO 1-10 6-CaO 1-107-K2O 1-68-Na2O 1-6

35

36

Effect of physical factors on Magma Crystallization

The Scientist N.L Bowen was explained The Crystallization of Minerals from Magma according to a certain sequence as:-

Plagioclase Rich in Ca Olivine (Fw,Mg)Sio2

Pyroxene (Augite) (Ca(Mg,Fe,Al)AlSi2O6) Hornblende (Ca,Mg,Fe,Al)(OH)2 ((Si,Al)4 O11) Plagioclase Rich in Na Biotite (Mg,Fe)(OH)2(AlSi3O10

Orthoclase (KAlSi3O8) Muscovite K2Al4(Si6Al2O2)(OH,F)4

Quartz SiO2

Olivine in non continue series is unstable, that when the condition of olivine is change like temperature decreasing, pyroxene is start

crystalline as a result of reaction between olivine and magma and Hornblende to biotite.

Anorthite in continue series is start to change by replacement of Na in place of Ca (with replacement of Si in place of Al ) to form

Plagioclase rich in Na instead of Plagioclase rich in Ca which results two kinds of rocks from (parent Magma) by way of (Differentiation):-

A-acidic Rocks. B- Basic Rocks.

M a g m a

First Crystalline Minerals

Continue Series Disc

ontin

ue S

erie

s

Temperature D

ecreasing

36

37

D-Classification of Igneous Rocks

Porphyritic texture:-Coarse and fine crystals in the same rocks. Pumice:-Classy texture with fine spaces as a result of gas escape.

Acidic Rocks Light Color-Low Density

Intermediate Rocks Basic RocksBlackish Color-Light Density

Granite

Rhyolite

Obsidian

Granodiorite

Dacite

Diorite

Andesite

Gabbro

Basalt

O r t h o c l a s e

Q u a r t z

P l a g I o c l a s e (KAlSi3O8)

Ferromagnesium Minerals

(SiO2)

(Na,Ca)AlSi3O8)

Olivine

Pyroxene

Amphibole

Ultra basic Rocks

Coarse Grains Texture

Fine Grains Texture

Glassy Texture

0%

50%

100%

Biotite Mica

37

38

Igneous Rocks Existence in Earth Crust

1-Plutonic Rocks:-It is Exist in Deep regions of Earth Crust, So it is reflect slow cooling and stable Pressure, Which is result big, equal and good arrangement crystals (Coarse Grains Texture), Such as Granite, Diorite and Gabbro. This Rocks are Present in Earth

Crust as very large Masses called (Batholith). These Masses consist Parts of Rocky and Alep Mountains for Hundreds kilometers Long, Tens kilometers Width and Unknown Depth.

2-Hypabyssal Rocks:- It is Exist in intermediate Deep Regions of Earth Crust, As a result of Magma Intrusive through Earth Layers. The Texture of these Rocks is Fine to Moderate like Rhyolite, Dacite, Andesite and Basalt. Hypabyssal Rocks are present in Dikes shape (Mass of Igneous Rocks are result of Magma up lifting through, vertical or oblique Fissures and Cracks).

Thickness of Dikes are many centimeters' to Tens meters . Or as Sill Shape (Parallel to Layers). So it is Exist as a Small

Dome named (Lacolith) with Diameter about Many Meters to Many kilometers, While Reverse Dome is Named (Lapolith) and Arciform

Saddle Shape Named (Phocolith).

3-Volcanic Rocks:- Igneous Rocks are Hardening on Earth Surface, As a result to flow of Lava through Volcanic Activity or through Cracks and Joints. The Texture of Volcanic Rocks are Glassy or Microscopic Crystals because of Sudden Cooling of Magna.

Note:-a-Rocks contains Fine and Coarse Grains are Named Porphyritic Texture.

b-Pumice is Volcanic Rock with Fine Spaces as a result of Gas Escape.

Igneous Rocks Existence in Earth Crust

1-Plutonic Rocks:-It is Exist in Deep regions of Earth Crust, So it is reflect slow cooling and stable Pressure, Which is result big, equal and good arrangement crystals (Coarse Grains Texture), Such as Granite, Diorite and Gabbro. This Rocks are Present in Earth

Crust as very large Masses called (Batholith). These Masses consist Parts of Rocky and Alep Mountains for Hundreds kilometers Long, Tens kilometers Width and Unknown Depth.

2-Hypabyssal Rocks:- It is Exist in intermediate Deep Regions of Earth Crust, As a result of Magma Intrusive through Earth Layers. The Texture of these Rocks is Fine to Moderate like Rhyolite, Dacite, Andesite and Basalt. Hypabyssal Rocks are present in Dikes shape (Mass of Igneous Rocks are result of Magma up lifting through, vertical or oblique Fissures and Cracks).

Thickness of Dikes are many centimeters' to Tens meters . Or as Sill Shape (Parallel to Layers). So it is Exist as a Small

Dome named (Lacolith) with Diameter about Many Meters to Many kilometers, While Reverse Dome is Named (Lapolith) and Arciform

Saddle Shape Named (Phocolith).

3-Volcanic Rocks:- Igneous Rocks are Hardening on Earth Surface, As a result to flow of Lava through Volcanic Activity or through Cracks and Joints. The Texture of Volcanic Rocks are Glassy or Microscopic Crystals because of Sudden Cooling of Magna.

Note:-a-Rocks contains Fine and Coarse Grains are Named Porphyritic Texture.

b-Pumice is Volcanic Rock with Fine Spaces as a result of Gas Escape.

38

39

Shapes of Igneous Masses

39

B a t h o l i t h

Lacolith

Lapolith

Phacolith

Sill DikeVolcano

39

40

2-Sedimentary Rocks

Sedimentary Rocks:-It is Covers about 3 / 4 of Earth Crust. The last quarter is cover by igneous and metamorphic rocks. It is represented by:-

1- Sedimentary Rocks are represent by stratification (Many Layers) , Which reflect color, Thickness and minerals for each layer. 2-It is contain fossils (remaining of creatures). 3-Some Times it is Compose of particular Minerals like Halite (NaCl), Coal (C), Phosphates(PO4) and Petroleum. A- Sedimentary Processes:- Four Processes are lead to creation of Sedimentary Rocks:-

1-Weathering. 2-Transportation. 3-Deposition. 4-Diagenesis.

1- Weathering:- a- Wind. b- Water (Fresh, Saline). C-Glacial. d-Creatures.

2- Transportation:-The products of Weathering are Transport far away to Deposition Regions. The Transportation take place by:- a-River Water. b- Wind. c-Glacial.

The Transportation is stay continuous with stability of Transportation condition such as wind and river velocity.

2-Sedimentary Rocks

Sedimentary Rocks:-It is Covers about 3 / 4 of Earth Crust. The last quarter is cover by igneous and metamorphic rocks. It is represented by:-

1- Sedimentary Rocks are represent by stratification (Many Layers) , Which reflect color, Thickness and minerals for each layer. 2-It is contain fossils (remaining of creatures). 3-Some Times it is Compose of particular Minerals like Halite (NaCl), Coal (C), Phosphates(PO4) and Petroleum. A- Sedimentary Processes:- Four Processes are lead to creation of Sedimentary Rocks:-

1-Weathering. 2-Transportation. 3-Deposition. 4-Diagenesis.

1- Weathering:- a- Wind. b- Water (Fresh, Saline). C-Glacial. d-Creatures.

2- Transportation:-The products of Weathering are Transport far away to Deposition Regions. The Transportation take place by:- a-River Water. b- Wind. c-Glacial.

The Transportation is stay continuous with stability of Transportation condition such as wind and river velocity.

3-Deposition:-The Transportated Materials are Deposit by either:-

a- Mechanical Deposition:- It is a result of changing for some mechanical agents like decrease of wind, current velocity, which result Clastics or Mechanical Deposits such as gravel, sand silt and clay.

b-Chemical Deposition:- Some of transported materials are deposit in liquid or colloidal state by many chemical methods. So the Deposition

may be result of reaction between different transported solutions such as:-

1- Transported Solutions. Na2CO3 + CaCl2 CaCO3 + 2NaCl

2-Transported Solutions with Gas. 2Fe+2 + 1 /2O2 + 2H2O Fe2O3 + 4H+ 3-Gas Escape of Solutions. Ca(HCO3)2 CaCO3 + H2O + CO2

All these Deposits are called Chemical Deposits or Non Clastics Deposits. Like limestone, dolomite, gypsum and halite.

c-Organic Deposition:- Some creatures are build their bodies of dissolved or colloidal which presents in water, So after death , These creatures are buried as Organic Deposits such as:- 1-Calcite (Oysters and corals are build their bodies of CaCO3). (Organic Calcite Rock). 2-Chert (Quartz is fine crystals). 3-Coal ( Remaining of vegetable with heat and pressure). 4-Iron and Sulfur (Bacteria is play as assistant agent in deposition of some ores).

40

41

4-Diagenesis:-It is all processes which affects in sediments through and after deposition but before hardening under normal conditions,

Which leads to change in Texture and Minerals Consists as:-

a- Cementation:- By cohesive materials like sand grains:- sand (SiO2) + calcite (Caco3 ) or FeO sand stone.

b-Compaction:- Here sediments are subject to Pressure like:- Clay Sediments Shale Stone

c-Recrystallization:- Growth of fine grains to coarse grains without changing in chemical components like:-

Lime Sediments coarse limestone

d-Replacement:- It means replacement of Ion instead of other like:- Mg CaCO3 (Ca,Mg)CO3 Dolostone.

e-Dissolving:- Rainfall (H2O) + CO2 H2CO3 H2CO3 + CaCO3 Ca(HCO3)2

4-Diagenesis:-It is all processes which affects in sediments through and after deposition but before hardening under normal conditions,

Which leads to change in Texture and Minerals Consists as:-

a- Cementation:- By cohesive materials like sand grains:- sand (SiO2) + calcite (Caco3 ) or FeO sand stone.

b-Compaction:- Here sediments are subject to Pressure like:- Clay Sediments Shale Stone

c-Recrystallization:- Growth of fine grains to coarse grains without changing in chemical components like:-

Lime Sediments coarse limestone

d-Replacement:- It means replacement of Ion instead of other like:- Mg CaCO3 (Ca,Mg)CO3 Dolostone.

e-Dissolving:- Rainfall (H2O) + CO2 H2CO3 H2CO3 + CaCO3 Ca(HCO3)2

Pressure

Growth

Replacement

B-location of Deposition:-Deposition is either on continent, named Continental Deposits or in the marines, named Marine Deposits.

1- Marine Deposits: Most of marine sediments are carry by rivers (millions tens of sediments yearly) The size of these sediments are between Boulders deposits (64 – 256 mm) to Silt deposits(1 / 16 – 1 / 256mm). The factor control deposition processes is (Sorting Power) which is present in migration water. The Sorting Power plays important role in the sediment distribution so that the big sediments are first deposit, Then the smallest and smallest.

Marine sediments divided into two kinds depend on site of these sediments:-

a- Littoral (Tidal zone):- This zone is controlled by action of sea waves and tide. The sediments is:- boulders, pebbles and coarse sand.

b- Neritic (Shallow-water zone) :- This zone is to extend off shore about 200 M depth. The sediments is:- Small gravel, sands and silt.

B-location of Deposition:-Deposition is either on continent, named Continental Deposits or in the marines, named Marine Deposits.

1- Marine Deposits: Most of marine sediments are carry by rivers (millions tens of sediments yearly) The size of these sediments are between Boulders deposits (64 – 256 mm) to Silt deposits(1 / 16 – 1 / 256mm). The factor control deposition processes is (Sorting Power) which is present in migration water. The Sorting Power plays important role in the sediment distribution so that the big sediments are first deposit, Then the smallest and smallest.

Marine sediments divided into two kinds depend on site of these sediments:-

a- Littoral (Tidal zone):- This zone is controlled by action of sea waves and tide. The sediments is:- boulders, pebbles and coarse sand.

b- Neritic (Shallow-water zone) :- This zone is to extend off shore about 200 M depth. The sediments is:- Small gravel, sands and silt.

2-Continental Deposits:-Continental deposits are include all the sediments of, wind, rivers, lakes and glaciers:-41

a- Wind Deposits:-1- Sand Dunes:- It is a result of weakness in wind power.

2- Talus Deposits:- It is accumulation of rock fragments at edges of highland and mountains.

b- River Deposits:-1- Riverbed deposits:- Gravel, sand and clay as a result of reducing at river velocity.

2- Flood Plains Deposits:- Like flood plain of Djilas and Forat river and delta (Delta of neel river). They are consist of

gravel, sand and Clay.

c- Lakes Deposits:-1-Fresh lakes deposits:- Like river de41posits.

2- Saline Lakes Deposits:- As a result of evaporation of lake water , different salts of chemical deposits are forming.

d-Glaciers deposit:- Different large and small materials (Loading Deposits) are present in frozen river (Glaciers) with very slow motion.

When glaciers are dissolving, suddenly loading deposits are forming.

2-Continental Deposits:-Continental deposits are include all the sediments of, wind, rivers, lakes and glaciers:-41






c- Lakes Deposits:-1-Fresh lakes deposits:- Like river de41posits.




2-Continental Deposits:-Continental deposits are include all the sediments of, wind, rivers, lakes and glaciers:-






c- Lakes Deposits:-1-Fresh lakes deposits:- Like river deposits.




2-Continental Deposits:-Continental deposits are include all the sediments of, wind, rivers, lakes and glaciers:-






c- Lakes Deposits:-1-Fresh lakes deposits:- Like river deposits.



When glaciers are dissolving, suddenly loading deposits are forming. 41

42

C-Texture of Sedimentary Rocks

Sediments and sedimentary rocks are consist of units named fragment grains or crystals. The description of these units called Texture.

Description is include:-1-Surface Feature of Grains:- Some grains are Shining and smooth, but another appears Score and pits.

2-Shape Of Grains:- It is Depend on roundness and sphericity. Some grains are angular, While anthers are

without angle, So between these two kinds all the grains are present.

For the Sphericity the Grains may be as Cylindrical Sphericity, Tablet Sphericity and Razor Shape .

3- Grains Size:- Many Scales are Known such as:-1- The sediment is called Sorted when all grains are equal.

2-The sediment is called Badly Sorted when grains are between large and small.

C-Texture of Sedimentary Rocks

Sediments and sedimentary rocks are consist of units named fragment grains or crystals. The description of these units called Texture.

Description is include:-1-Surface Feature of Grains:- Some grains are Shining and smooth, but another appears Score and pits.

2-Shape Of Grains:- It is Depend on roundness and sphericity. Some grains are angular, While anthers are

without angle, So between these two kinds all the grains are present.

For the Sphericity the Grains may be as Cylindrical Sphericity, Tablet Sphericity and Razor Shape .

3- Grains Size:- Many Scales are Known such as:-1- The sediment is called Sorted when all grains are equal.

2-The sediment is called Badly Sorted when grains are between large and small.

1-Boulders > 256mm2-Gravels 256 – 2mm3-Sand 2 – 1 /16mm4-Silt 1 /16 – 1 / 2565-Clay < 256mm

Clastics (Mechanical) Of

Sedimentary Rocks

D-Primary Structure Of Sedimentary Rocks The primary structure of sedimentary rocks are forming through Sedimentation Processes, As a result of natural conditions which are control rocks forming. There is difference between primary structures and secondary structures, That the later are formed by different forces after the deposition of sedimentary rocks like folds, joints and faults. There are many kinds of primary structures such as:-

1-Stratification:-Sedimentary rocks consist of sequence layers, So every layer has :-

a- Thickness:- (Many centimeter is named Lamina – Many or hundreds meter is named Layer). Layer thickness is depend on volume,

nature of sediments and sedimentation environment. Some times sedimentary body is deposited as lens, tongue. b- Bedding Planes:- (Two parallel planes are on and under the layer).2-False or Cross Bedding:- One layer is consist of Many Lamina with different dip, As a result of changing in the strength of Current , Wind direction, which is reflect the original environment at sedimentation time.

3-Ripple Marks:- It is clear at recent sediments of beach , as a result of wave Current and sand flats of desert.

4-Mud Cracks:-Mud is loss water by sun heat, Which is lead to shrink, and to crack of mud in hexagonal sides shapes. Sometimes cracks are fill with sand or limestone deposit, So the later may be work cementing material. This criteria is useful to know ancient environment.

D-Primary Structure Of Sedimentary Rocks The primary structure of sedimentary rocks are forming through Sedimentation Processes, As a result of natural conditions which are control rocks forming. There is difference between primary structures and secondary structures, That the later are formed by different forces after the deposition of sedimentary rocks like folds, joints and faults. There are many kinds of primary structures such as:-

1-Stratification:-Sedimentary rocks consist of sequence layers, So every layer has :-

a- Thickness:- (Many centimeter is named Lamina – Many or hundreds meter is named Layer). Layer thickness is depend on volume,

nature of sediments and sedimentation environment. Some times sedimentary body is deposited as lens, tongue. b- Bedding Planes:- (Two parallel planes are on and under the layer).2-False or Cross Bedding:- One layer is consist of Many Lamina with different dip, As a result of changing in the strength of Current , Wind direction, which is reflect the original environment at sedimentation time.

3-Ripple Marks:- It is clear at recent sediments of beach , as a result of wave Current and sand flats of desert.

4-Mud Cracks:-Mud is loss water by sun heat, Which is lead to shrink, and to crack of mud in hexagonal sides shapes. Sometimes cracks are fill with sand or limestone deposit, So the later may be work cementing material. This criteria is useful to know ancient environment. 42

43

E-Classification Of Sedimentary Rocks

43

Grains Size Sediments Rock Name

> 256 mm Boulders Conglomerate Breccia

2 – 256mm Gravels Conglomerate Breccia

2 – 1 /16 mm Sand Sandstone

1 /16 – 1 /256 Silt (50%Sand+50%Clay)

Siltstone

< 1 /256mm Clay Clay stone

Kinds Of Sedimentary Rocks

Texture

Chemical Composition Rock Name

Clastic or Non Clastic

CaCO3

(Ca,Mg)CO3

LimestoneDolostone

Non Clastic CaSO4 2H2ONaCl

GypsumHalite

Organic or Biological

CaCO3

SiO2 fine GrainsRemaining of Vegetable

Organic LstChertCoal

Mechanical Or Clastic Sedimentary RocksChemical And Organic Sedimentary Rocks

Chem

ical

Coal Forming Stages :-

Plants Remaining in Swamps for a long Time Beat Lignite

Anthracite Bituminous

Heat and Pressure

Heat and Pressure for a Long TimeMore Heat and Pressure For a Longer Time

Bury

43

44

Metamorphic RocksMetamorphism:-

It is chemical, physical and mineralogical changes which is occur on original rocks. Igneous, Sedimentary and even metamorphic rocks).

When these rocks are subjected to heating or pressure or both., The metamorphic rocks becomes stable under new conditions. All the metamorphism processes are happened in solid state with assistant of hydrothermal solutions which are present in Rock pores.

Sed

imen

tary

R

ocks

Classification of Metamorphic Rocks

Increasing at Temperature and Pressure

Foliated Metamorphic Rocks

Non Foliated Rocks

44

45

Dynamic Geology Geological observations shows very slow changes in the earth by comparative with human life, But we can notice this changes in different

geological methods. The energy is responsible for all changes in earth. there are two source for energy:-

A- Solar Energy (Outer Source):- It is the major source of energy on earth surface, Which is affected on atmosphere, hydrosphere and biosphere covers. The solar energy on oceans, seas and lakes leads to water evaporation, Then rains, Ice fall, flowage to the rivers, Then the sediment will be transported and deposited. The rivers and wind are transport weathered rocks to the sedimentary basins and seas as transported sediments. Also solar energy is the reason of bioactivity through plant cover, sea creatures.

B-Earth Bottom (Inner Source):- Some scientists believes that, the source of heat which is drive convection current in mantle and core is both original heat from the planets formation and heat from the decay of radioactive isotopes. The position of these hot sources forms a hot zones

leading to rise and down convection current, So the result is horizontal movements in the rock cover (Lithosphere), Which consist of many Plates float on the lower mantle (Asthenosphere). When two plates are moving toward each other it named (Convergent Plate Boundary) ,and two plates are moving a part, (Divergent Plate Boundary) and when two plates move horizontally parallel each other it named (Transform Plates Boundary).

The Energy is play continues changing in Earth Crust through two kinds of processes:- 1-Epigene Processes. 2-Hypogene Processes.

1-Epigene Processes (External Processes)-:

It is a reaction result of all processes between atmosphere, hydrosphere and biosphere with earth crust. These processes leads to formation of earth shape by different topographic (relief) phenomenon by-:

A-Weathering. B-Erosion. C-Transportation. D-Deposition.A- Weathering:- It is all the processes leads to disintegrate rocks into small parts.

1 -Mechanical Weathering:-It means Disintegrate of rocks with out changing in mineralogical composition. a- Change in Temperature:- Daily or seasonally change in temperature leads to expansion and shrinking (Contraction) of rocks, Which is

leads to Rocks Exfoliation. b-Unloading:- It means removing of layers weight from one layer, which is result sheeting of layers with some cracks, then easy to

disintegrate . c-Bioactivity:- Roots of Plant between the rock cracks is lead to disintegrate of rocks.

45

46

b-Carbonation:-It means reaction between CO2 (Atmosphere) with Rain Water to Consist H2CO3 as :-

CO2 + 2H2O H2CO3 + H2O

Carbonic Acid reacts with Rocks contain Alkaline (Oxides of Sodium, Potassium and Calcium).

H2CO3 +CaCO3 Ca(HCO3) (Soluble in Water)

This reaction leads to disintegrate of Bicarbonate Rocks to form Caves with beautiful Formation of Stalactite and Stalagmite.

c- Hydration:-Union between Water and Some Minerals to form Hydrate Minerals.

KAlSi3O8 + 2H2O + CO2 AlSi2O5 + 4SiO2 + KCO3

Orthoclase Kaolinite Sand

The Reaction result is show Resource of Kaolinite and Sand.

Another Reaction between Anhydrite and Water:-

CaSO4 + 2H2O CaSO4.2H2O

Anhydrite Gypsum

d-Dissolving and Organic Agents:- Some Minerals Dissolved in Surface or Ground Water, So water of Creature is increase Rocks

Humidity, Thus all these agents leads to Disintegrate of Rocks

2-Chemical Weathering:-It is true reaction between hydrosphere and atmosphere with lithosphere by assistance of mechanical weathering (heat, secretion of creatures). The chemical weathering means analysis of rocks to another minerals may be different of original minerals as-:

a-Oxidation:- Most minerals consist rocks are contain Iron like pyroxene, olivine, So oxidation of these minerals leads to Iron oxide on their surface (Red or Black color). This phenomenon is clear at desert region and called (Desert Varnish) like-:

FeS2 + 2O2 S + FeSO4 (Ferris Sulfate is well Dissolved in water.

46

47

Weathering Products and Soil Formation Mechanical and chemical weathering plays together to break and integrate all the rocks. The weathering products may be stay or

transported to other region as:-

1- Mechanical Weathering is Dominant at Polar and Desert Region.

2- At moderate regions, chemical weathering is dominant at summer while mechanical weathering is dominant at winter.

Example :- Granite is plutonic rock, It is Consist of ( Quartz + Orthoclase + Plagioclase + Little amount of Biotite and Muscovite + Trace

amount of Zircon and Apatite).

a- Quartz, Biotite and Muscovite are Resistance Minerals.

b- Orthoclase is analysis by (Carbonation or Hydration) into

1- Colloidal Silicate + Potassium Salt Dissolved in Water.

2- Remaining of Clay Minerals.

c- Iron and Magnesium Minerals

1-Colloidal Silicate + Some of Iron and Magnesium dissolved in Water.

2-Remaining of Clay Minerals.

Boulders and Soil are Weathering Products in very Large regions on Earth Surface.

Chemical Weathering

Chemical Weathering

B-Erosion:-It is mean rocks disintegrate (Weathering), transportation of weathering products and Deposition of these weathered materials. Erosion is play either destructive or constructive agent……… How?

Agents of Erosion :- 1-Wind Action. 2-Surface Water Action 3-Seas Action.. 4-Glacierse Action.

1-Wind Action : It is depend on wind velocity. when the velocity at high speed, It is carry maximum load of weathered materials to

different distance (Deflation) especially at dry Regions. here the wind action is Destructive, So by wind Abrasion.

a- Destructive Wind Action:-Differential erosion in the soft and hard of sequence layers are forming many geomorphologic

Phenomenon like:-

1- Mesa:-It is local platform surrounding by gentle slope figure1A . 2- Butte:- It is an isolated platform surrounding by step slope figure1B.

3- Mushroom:- It is an reverse half dome with neck figure I C . 4- Oasis:- It is a desert depression by wind action.

47

4848

A-Mesa

B-Butte

C- Mushroom

Figure 1 Some of Geomorphologic Phenomenon by Wind Action

48

49

B-Constructive wind action:-

Wind Action becomes constructive due to the losing of wind velocity. So the load of wind (different detrital Rocks)

descend on the land to form either:-

1-Unsteable Phenomenon like Ripple Mark Figure 2 A .

2-Steable Phenomenon like Sand Dunes and Loss Deposits Figure 2 B.

49

Wind direction at sand flats of desert

Waves current direction at sea beach

R i p p l e M a r k s

Figure 2 A

49

50

Wind Wa rd Slope

Eddy Current

Lee Slope

Wind Direction

Faster Wind

Slower Wind

10 �30 �

S a n d D u n e F o r m i n g

Sand Dunes Forming is a result of reducing at wind velocity. Sand dues are growth around small part (Gravel or Sand) called Nucleus. Some times it moves to another place with wind direction by way of Sand Dunes Migration. Dunes highest is between (few – many Tens) feet.

Loess Deposits :- It is very fine grains (Dust) of quartz, mica, calcite and feldspar with reddish yellow, suspended in air for a long distance, Then it is descend on earth surface by gravity or rainfall. The typical formation is Loess Area in France.

There are many kinds of Sand Dunes Figure 3 :-

Figure 2 B

50

51

1- Barchan (Crescentic) Dunes

4-Star Dunes

2—Transvers Dunes 3-Longitudinal Dunes

5-Seif Dunes 6-U-Shape Dunes

Iraqi Sand DunesWest of Beji – TikreetEast of NajafWest of SamawaWest of Nasiriyah Figure 3 Types of Sand Dunes 51

52

2-Surface Water Action

Surface Water action is include :-

a-Rains:- It is rains fall on earth surface in different quantities. It is depending on:-

1- How many meter, the land is above sea level?.

2- How much far away of sea?.

b- Torrent:- When the rains are fall on the high lands, torrent is shovel a lot of detriatal

materials to form deep waterway (Canyons) .

c-Water of Ice melt:- During spring season, The water of Ice melting is carry detriatal

materials similar to rain.

Is the Rains, Torrent and Water of Ice Melting are Destructive or Constructive?.

d-Rivers:- Rivers are transported the sediments by one of ways:-

1- Deposits in Form of Dissolved Materials:- like salts (CaHCO3, CaCO3, CaSO4, NaCl).

2- Light Weight Deposits in Form of Suspended Materials:- like clay minerals , Silt,

Very small Particles of Different Rocks.

3- Heavy Deposits in Form of Jump, Roll and Sliding Deposits:- like relatively large grains of different sources.

Rivers have three stages from it s originated (Recharge Area) to mouth at sea (Discharge Area) :-

1- Youth Stage.

2- Mature Stage.

3- Old Stage.

52

53

1-Youth Stage

Properties of Youth Stage:-

a- the cross section of River at Youth Stage is V shape.b- Ability to Grave its Riverbed.c- Waterfalls are Present.d- The Branches of River are Short and Little.e- It can not be Navigation of Ships in this Stage.f- It is Good for Electricity Generation.g- Dijla River is represent this stage from (Armenia Highland) in Turkey to Mosel City in North Iraq.

Properties of Mature Stage :-

a- River is More Width and it had Gentle Slope on both sides, So the shape of Cross section is like half Cycle.b- The Branches is more than Youth and Longer.c- Velocity of Water is Moderate, So it is suitable for Navigation.d- Area between Mosel and Baghdad is represent Mature Stage.

Properties of Old Stage:-

a- River depth and Slope of both Sides are Little.b- Low Flow and much Deposits.c- Flood plain is Present on both sides of River. so the River was loosed its Energy for Graving, Thus the River is begin to Deposits to form Flood Plain.d- Meanders are Present in this Stage.e- Area between Baghdad and Basra is represent this Stage.

2-Mature Stage 3-Old Stage

Stages Of River

Flood Plains

53

54

Plate Tectonic Theory

Plate Tectonic is the study of the origin and arrangements of the broad structural features of earths surface, including not only folds and faults, but also mountains belt, continents and earthquakes belts.

The basic idea of Plate Tectonics is that, earth surface is divided into eight large Plates plus Few smaller Plates makeup the outer shell of Earth (Lithosphere). Plates are move slowly With intense geologic activity occur at plate boundary where plate moves away from one another.

2-Hypogene Processes (Interior Processes) Hypogene processes means all internal processes which is lead to either a quick processes like earthquakes and volcanoes or slow processes like

oroginic movement. plate tectonic theory explains this processes.

Inner Core

Outer Core

Asthenosphere (Lower Mantle)

Lithosphere(Earth Crust + Upper Mantle)

Oceanic Trench Mid- Oceanic Ridge(Rift Valley at Ridge Crest)

Convection Currents

Figure 4 Convection Currents

Volcano

54

55

Scientists believes that the source of internal thermal Energy in Mantle and Core is either:-

A- Heat of Planets Formation. B- Heat From the Decay of Radioactive Isotopes.

It is Forming very hot regions to Consist (Convection Current). Which is lead to horizontal Movement in Earth Crust (Figure 4 ) Floats on Asthenosphere (Lower Mantle).

Alfred Wegener A German Meteorologist At 1900 and Harry Hass An English Geologist At 1962 Suggests That:-

1- Our Continental can be collected together like Pieces of cutting Picture (Split begin about 130 million years ago). 2- Alfred Wegner noted that, south America, Africa, India Antarctica and Australia have almost identical the late Paleozoic rocks and Fossils. 3- Wegner also reconstructed old climate zones by steadying Coral Reef (Warm Water) Cross Bedding( Desert Environment) and Glacial Till (Cold Environment). 4- He found that, ancient Magnetism Poles were in different positions than the present Poles (Polar Wandering). 5-Harry Hass 1962 suggest that the Sea floor moves away from the Mid – Oceanic ridge as a result of Mantle Convection Currents. 6- He Suggests that, the Ridge Crest with Sea floor moving away from it on either side, ha been Called (Spreading Center). 7- The sliding of Sea floor beneath a Continent or Island Arc is named (Subduction). 8-The Sea floor moves at a rate of 1 – 24 centimeter per year.

Why Does the Sea Floor Move (Spreading)? Sea floor spreading is a result of deep, hot of Mantle Convection Current, since a hot Rocks is rising (Low Density), and Cold Rocks is descend (High density).

Hypogene Processes (Interior Processes) are Divided Into:-

A- Quick Processes:- 1-Earthquake. 2- Volcanoes. 3- Geysers and Hot Springs.

B- Slow Processes:- 1- Orogenic Movement. 2- Epeirogenic Processes.

55

56

A-Quick processes

1- Earth Quakes:- It Is shaking of earth surface, as a result of sudden discharge of energy which is stored in Earths Rock.

Figure4 A- Is show rocks under the stress by tectonic forces in the earth.

B- Is show rocks have a bending or deformation shape (Strain).

C-Is show rocks are break with discharge of energy is released as Seismic Waves which causes the earthquake.

The break of earth Rocks is called Fault with move past one another along a fault. Usually, the energy stored in the rocks is more enough to

break the rocks suddenly and making earthquakes. The move of rock through a fault may be vertical or horizontal or both.

There are two idea for faulting:-

1-Classic (Old) idea:-It must be a very large stress acting to break rocks along a fault because the faults are very hard.

2-New idea:- Fault are weak, so little stress is enough to make rupture then earthquakes.

stress

Earthquake

Fault Displacement

AB C

Figure 4

strain

56

57

Rocks behavior near earth surface is brittle, While at depth it subjected to more temperatureand pressure, which leads Rocks behave to be ductile rocks. This means there are a limit of depth for faulting. Usually earthquakes are happened with faults displacement, But in some earthquakes are not with surface faults displacement like earthquakes of eastern united states. Earthquakes also happened during volcanic activity.

Seismic Waves

The source of seismic waves is Focus, While the Epicenter is a point on earths surface vertically above

the Focus Figure 5. There are two kinds of seismic waves:-

A- Body Waves:-It is seismic waves travels through underground rocks in all ways, So it is divided

into two types:- 1- P-Waves (primary):-In this waves, Rocks are

shaking front and back parallel to direction of P waves. The properties of this waves are:-

a-Travel near earths crust at velocity about 6 kilometers per second(figure-6- A).

b- P- Waves is faster than other waves. c-It is first reaches the station of recording. d-It can pass through solid, liquid and gas.

Focus

Epicenter

Seismic

Waves

Fault T

race

Fault S

carp

Figure 5 Seismic Waves

s

57

58

2-S – Waves (Secondary):- In this Waves, Rocks are shaking up-down through direction of waves.

The properties of S Waves (Figure 6 B) are :- a-Velocity is about 3 kilometers per second (about half Velocity of P Waves).

b- S – Waves reaches station of recording after P- waves. c- It can pass through solid only.

B-Surface Waves:- Surface waves are more dangerous of P and S waves, because they toughs our life, building, railway, roads, power line, bridge. Generally

surface waves are slowest than P and S waves, So they can doing more damage by slow movement and (relatively) long time Through surfaces of earth.

There are two kinds of surface waves:-

1-Love Waves:-The properties of love waves (Figure 7 A) are:- a-Similar to S waves but no vertical replacement.

b-Direction of love waves are perpendicular to direction of love waves at two sides away. c-Love waves cannot travel through liquids (like S waves).

d-It attack building, highways at their supports.

2- Rayleigh Waves:-The properties of rayleigh waves (Figure 7 B) are:- a-The behavior of rayleigh waves are like ocean waves.

b-Rayleigh waves are causing movement in earth surface as cylindrical way in opposite direction to waves way.

c-Rayleigh waves are break and destroy the building because they results earth surface up – down movement for (relatively) long time.

58

59

Particle Motion

Expand Compress

Waves Propagation

Particle Motion

Waves Propagation

(Figure-6-Body Waves)

A-Primary-W

B-Secondary-W

Two Sid

es A

way M

otio

n

Rayleigh Waves Propagation

(Figure-7-Surface Waves)

A

B

Lov

e W

aves

Pro

pagat

ion

59

60

A-Measuring of Earthquakes

Measuring earthquakes includes amount of size, depth and location of earthquake.

Seismometer is the instrument used fore measuring of an earthquakes exactly (figure 8 – 9). The principle of the seismometer is to make a mass of heavy weight stable through the earth surface, moves as possible ,so the mass work like pointer (with pen) for determination

The amount of earth surface up-down motion. Always they put three seismometer in one container to detect the earth surface motion in X , Y and Z directions.

Seismograph is a recorder instrument for earth surface vibration which is detected by seismometer.

Seismogram (Figure 10 )is the paper record of earth surface vibration and can be used to calculate the earthquakes strength. almost all the countries have earthquake detection stations. after short time seismograph within stations starts to receive seismowaves , the P waves then S

waves, then the surface waves arrives to station of seismographs.

Finally the geologists calculated these seismowaves to get the site and magnitude of earthquakes.

B-Earthquakes Location P and S are two body waves migrate through earth body in different velocity, So they divergent and the first P Waves reach Earth quakes

station , Then S Waves after time interval. (here we can separated between the first time reach P Waves and S Waves). In Order to get Epicenter (surface point above Focus) Figure 10 and 11 , It must be find at least three seismogram record (Seismograph Stations). From time

interval (between two time travel curve), We can find the true distance on earth surface on special paper (seismogram paper), By drawing three intersect cycles on a map, the point of an Intersection is Epicenter.

Also from analysis of seismogram, We can calculate the depth of earthquakes.

According to focus depth, earthquakes are divided into three groups:-

1-Shallow Focus 0 – 70 kilometer 85% of Earthquakes. 2-Medium Focus 70 – 350 kilometer 12% of Earthquakes. 3-Deep Focus 350 – 760 kilometer 3% of Earthquakes.

Why?

60

61

NormalMoving Up

Moving Down

Ground Movement

Rock

Rock

Rock

Rock

Heavy WeightWireHard Tower

Figure 9 Seismograph Horizontal Movement

Rotating Drum

Constant, Pen Elevation

Figure 8 Seismograph – Vertical Movement

61

62

5

10

15

20

25

1000 2000 3000 4000

Baghdad

Moscow

London

London Moscow Baghdad

S

4 minuteinterval

6 minute interval

11 minute interval

P

Figure 10 SeismogramDistance From Epicenter (Kilometers)

Ear

thq

uak

e T

ime-

Min

ute

Epicenter 1-Distance between Epicenter and London :- 4 min x 60 x 6 km/ sec =1440 km

2-Distance between Epicenter and Moscow :- 6 x 60 x 7 km /sec = 2520 km

3-Distance between Epicenter and Baghdad :- 11 x 60 x 6 km/sec = 3960 km

Surface Waves

Figure 11 Location of Earthquakes 62

63

2-Volcanoes What is the Volcano?

When lava is being viscous and spread out of earth body as a flood, Lava is forming a hill or mountains named a Volcano Figure 12.

Table 1 is show characteristic of different type of Volcanoes.

Table 1 Types of Volcanoes

Type of Volcano

Form of Volcano Size

Type of Magma

Style of Activity Examples

1-Basalt Plateau Flat to gentle Slope Large and thick Basalt Gentle eruption from long fissure

Columbia River plateau

2-Shield Volcano Slope 2 – 6 Up to 9000 m high

Basalt Gentle, some fire fountains Hawaii

3-Cinder Cone Moderate slope 100 - 400 m high Basalt or Andesite Ejections of pyroclastic material

Paricutin Mexico

4-Caldera

Cataclysmic explosion leaving a circular depression Called Caldera

Less than 40 km in diameter

Granite Very Violent Yellowstone, San Juan Mountains

63

64

Lava Flow

Volcano Pipe

Volcano

Dike

Sill

Plutonic Body

Figure 12 Volcano Formation

Volcano Hill (Extinct)

Volcano Mountain

64

65

Why Rocks are being in melting state?

The upper mantle (depth 100 – 350 kilometer) is named Asthenosphere which is consist about 1 -2 % of mantle. asthenosphere is Molten layer. Three factors controls the upper part of asthenosphere to form Magma. 1-Temperature increasing:- At natural low, Solid is being melt when it being hot . So increasing of temperature will be melt a hot rock. Volume of melting magma will increase about 10% than original rock. 2-Pressure decreasing:-When minerals melts, atoms composed it becomes disordered and moves freely. The temperature in asthenosphere is enough to melt rock, but the high pressure prevents the rock to expand , and cannot melt .When the pressure decreases, big quantity of asthenosphere will melt. 3-Water steam under pressure:-Generally, wet rock melts at lower temperature than dry rock. 4-Minerals mixing ratio:-Experiments are explain that, melting temperature for quartz(SiO2 is about 1600C and orthoclase(KAlSi3O8) about 1300C. mixing 40% quartz and 60% orthoclase, The melting temperature is reduce to about 1000C.

When and how Magma is forming?

The composition of magma is control by geologic place. Basaltic Magma is associated with oceanic crust, While Granitic Magma is common in continental crust. Magma is forming in three Tectonic areas:-

1-Magma of spreading center:- When lithospheric plates are separate at spreading zone, viscous, hot asthenosphere leaks up way to fill the gap result of convection currents as at Figure 13. As asthenosphere rises, pressure is releases to form melting Basaltic Magma , moreover the magma is of lower density than surrounding rock, thus magma is up word to ocean surface as Lava flow. Ocean contains most Spreading center (Some spreading center. Like the African Rift occur in Continents with Basaltic magma too), and they forms the Mid-Oceanic Ridge system.

The Magma created at the spreading center erupts from the ridge beneath the sea floor and solidifies to form new Oceanic Crust as Lava Flow at a few places such as Islands, which is result of Ridge rises above Sea level, as Lava flow .

2-Magma of Mantle Plume-: The Magma Plume is rise because it is hotter than the surrounding Mantle and less dense and more floating. Since the plume is rise, pressure

– release melting enough beneath the Lithosphere to form Magma , Which is rise up to earths surface Figure 14 The Magma Plume may be occur in Continent like the (Yellowstone hot spot at Yellow stone National park), that the hot spot is responsible for the Volcanoes and hot springs. If the Mantle Plume rises bellow the Sea floor, Volcanoes Islands is build up like Hawaiian Island at Pacific Ocean. 65

66

Oceanic Crust

Spreading Center Mid - Oceanic Ridge

Magma

Rising Asthenosphere

Convection Current

Sea Level Lithosphere(Earth Crust + Upper Mantle)

Figure13– Magma of Spreading Center

3 -Magma of Subduction Zone:- The subductinn plate of oceanic crust is saturated with water. Through the subduction, the water forming stream into hot asthenosphere, As the subduction plate descends oceanic plate is slip asthenosphere rock down with it Figure 15. Rock from the Deeper

part in the Asthenosphere, then flow up word to replace the Sinking Rock, leaving zones of less Pressure at hot Rock rises. Also Friction between Oceanic Crust and Continental crust is Generate heat in Subduction zone. Now water Vapor, less pressure and frictional

heating plays together to melt Asthenosphere Rock. Volcanoes and Plutonic Rocks are the Result of Subduction Zone The Pacific North west is example of Volcano, So the Granitic Cliffs of Yosemite and Andes mountains are example of plutonic rocks

66

67

LithosphereOceanic Crust +Upper Mantle

Extinct Volcanoes

Asthenosphere

Oceanic Crust

Rising Mantle Plume

Magma Formation (Partial Melting)

Rising Mantle Plume

Figure 14 Magma of Mantle Plume

Volcano

LithosphereContinental Crust + Upper Mantle

Asthenosphere

Volcano Continental CrustSea Level

Water Rising By Heating of FractionRising Magma Fraction Zone

Granitic Plutone

Oceanic Crust

Figure15 Magma of Subduction Zone

67

68

Steam Empty Chamber

Figure 16 Geyser Formation

H o t B o d y

Narrow Neck

3-Geysers and Hot Springs

Ground Water may heated by:- A-Naturally earth Layers temperature is increase about 25-35 C per one kilometer depth in earth Crust, So if ground water is leakage down about 4 kilometer, it will heated to 100 C. The hot water will rise up because of low density, While the cold water is moves down. This type of hot springs is rare. B-At the regions of Volcanic activity, Magma is still near Earth Surface and it can heat Ground Water. Hot spring in This case is Familiar (like hot springs and Geysers in Yellowstone National Park – United States) Figure 16 . C- Some hot sprigs have disagreeable smell of H2S Gas dissolved in hot water, which results of reaction between hot water and sulfide minerals (Exothermic Reaction) like (Galena – PbS Pyrite – FeS2 Sphalerite – ZnS And Chalcopyrite – CuFeS2).

Aquifer

68

geological branches a-basic geology:- b-connected branches:- c- applied geology:-

Documents

geology geology

engineering geology

basic geology

meaning of geology

economic geology

petroleum geology

structural geology

mining geology