generating thermo-electricity using graphit and aluminum module
TRANSCRIPT
![Page 1: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/1.jpg)
Aluminum – Graphite Aluminum – Graphite Thermo-electric Thermo-electric
GeneratorsGeneratorsCharith S Suriyakula
Faculty of Applied SciencesRajarata University of Sri Lanka
![Page 2: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/2.jpg)
Simple theorySimple technologyLow cost Robust
![Page 3: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/3.jpg)
For what.....?For what.....?• Fossil fuel is a limited resource of Earth. Fossil
fuels are non-renewable and is a finite resource.• To meet the power demand of the world, people
have to discover renewable energy sources.• Using fossil fuel is damaging the environment and
also it is expensive
![Page 4: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/4.jpg)
2012 world electricity generation pie chart, from BP Statistical Review of World Energy 2013
![Page 5: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/5.jpg)
Renewable energy Renewable energy sourcessources• Main source is sunlight. Also known as Solar
energyo Can directly use to light, heat homes and other buildings.o Can be used to generate electricityo Hot water heating
• Wind energy is captured by wind turbines to generate electricity
• Hydro power is used to rotate turbines and generate electricity
• Some alternative energy generation methodo Geo-thermal energyo Thermo-electricity
![Page 6: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/6.jpg)
What we need……?What we need……?Heat energy from any source………Heat energy from any source………
• Mechanical engines, computers
• Stoves, lamps• Sun light • Radio active elements…….
![Page 7: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/7.jpg)
Heat Heat Electricity ? Electricity ?• Seebeck effect is the
phenomenon of inducing electricity from heat
• It was first discovered by Thomas Seebeck in 1821
• Modern technology use semiconductor materials to design TEG devices
![Page 8: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/8.jpg)
• To design and develop a low-cost and low-tech thermo-electric generator module.
Glass slidesCopper wires
plastic
wood
aluminum
adhesives paper
![Page 9: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/9.jpg)
Seebeck coefficients of some common Seebeck coefficients of some common metalsmetals
Metal / Alloy Seebeck Coefficient (µV/K) compared to
Platinum
Semiconductor Seebeck Coefficient (µV/K)
compared to Platinum
Antimony 47 Se 900Nichrome 25 Te 500Cadmium 7.5 Si 440Gold 6.5 Ge 300Silver 6.5 n-type Bi2Te3 -230Copper 6.5 p-type Sb2te3 185Lead 4.0 PbTe -180Aluminum 3.5 Pb06Ge39Se58 1670Carbon 3.0 Pb15Ge37Se58 -1990Mercury 0.6 PbBi4Te7 -53Platinum 0 SnSb4Te7 25Sodium -2.0 SnBi4Te7 120Bismuth -72 SnBi2Sb2Te7 151
Metal / Alloy Seebeck Coefficient (µV/K) compared to
Platinum
Semiconductor Seebeck Coefficient (µV/K)
compared to Platinum
Antimony 47 Se 900Nichrome 25 Te 500Cadmium 7.5 Si 440Gold 6.5 Ge 300Silver 6.5 n-type Bi2Te3 -230Copper 6.5 p-type Sb2te3 185Lead 4.0 PbTe -180Aluminum 3.5 Pb06Ge39Se58 1670Carbon 3.0 Pb15Ge37Se58 -1990Mercury 0.6 PbBi4Te7 -53Platinum 0 SnSb4Te7 25Sodium -2.0 SnBi4Te7 120Bismuth -72 SnBi2Sb2Te7 151
![Page 10: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/10.jpg)
![Page 11: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/11.jpg)
![Page 12: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/12.jpg)
• The following factors were considered when designing
o Minimized Heat conductivity from “hot” junction to “cold” junction.
o Maximized temperature difference between “hot” and “cold” junctions
o The contact points of two materials needs to be clearly specified.
o More couples = more power
![Page 13: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/13.jpg)
• More couples in a single glass slide.• Still the contact points were not clearly
visible.
![Page 14: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/14.jpg)
• The aluminum and graphite strips are connected using “L” shaped contact area.
![Page 15: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/15.jpg)
![Page 16: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/16.jpg)
![Page 17: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/17.jpg)
ResultsResults
![Page 18: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/18.jpg)
![Page 19: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/19.jpg)
![Page 20: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/20.jpg)
DiscussionDiscussion Strip width comparison
Cell #
Aluminum Graphite Number of junctions
Hot Junction Temp. (0C)
Cold Junction Temp. (0C)
Room Temp. (0C)
Generated voltage (mV)
Total resistance (kΩ)
Width (cm)
Height (cm)
Width (cm)
Height (cm)
05 0.5 3 0.5 3 4 37 22 29 0.24 45.6 0.5 3 0.5 3 4 45 24 29 0.52 50.4 0.5 3 0.5 3 4 54 26 29 0.78 55.2 0.5 3 0.5 3 4 67 28 29 1.27 60.113 1.0 3 1.0 3 4 43 23 28 0.26 39.7 1.0 3 1.0 3 4 54 27 28 0.58 47.6 1.0 3 1.0 3 4 98 42 28 2.1 48.1
![Page 21: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/21.jpg)
![Page 22: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/22.jpg)
Cell #
Aluminum Graphite Number of junctions
Hot Junction Temp. (0C)
Cold Junction Temp. (0C)
Room Temp. (0C)
Generated voltage (mV)
Total resistance (kΩ)
Width (cm)
Height (cm)
Width (cm)
Height (cm)
13 1.0 3 1.0 3 4 43 23 28 0.26 39.7
1.0 3 1.0 3 4 54 27 28 0.58 47.6
1.0 3 1.0 3 4 98 42 28 2.1 48.1
15 1.0 2 1.0 2 4 82 38 28 2.01 21.6
1.0 2 1.0 2 4 90 39 28 2.1 54.8
1.0 2 1.0 2 4 103 46 28 2.52 62.9
1.0 2 1.0 2 4 114 51 28 3.0 92.8
Strip height comparison
![Page 23: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/23.jpg)
![Page 24: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/24.jpg)
• Generated per couple voltage increases with the temperature difference between two junctions.
• Theoretically this is a linear relationship.
• Some reasons for the variation with the practical grapho Unevenly distributed graphite powdero Contact between the tow materials
• Temperature difference between the ‘hot’ and ‘cold’ junctions play an important role in generating a higher voltage.
![Page 25: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/25.jpg)
Future developmentsFuture developments• Introducing a proper cooling mechanism for the
‘cold’ junction.
• Experimenting on different materials to make the design more portable and to minimize the heat conductivity between the two junctions.
• Making the module more durable.
![Page 26: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/26.jpg)
AcknowledgementAcknowledgement• Dr. Deepal Subasinghe of Institute of
Fundamental Studies, Kandy for the opportunity given to conduct the project.
• Senior colleagues of Department of Earth Sciences, Institute of Fundamental Studies, Kandy for the continuous support and guidance given throughout the project.
• Dr. T. M. W. J. Bandara of Faculty of Applied Sciences, Rajarata University of Sri Lanka for the constant advice given to make this project a success.
![Page 27: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/27.jpg)
ReferencesReferences• 1. Van Herwaarden, A. W., & Sarro, P. M. (1986). Thermal sensors based on
the Seebeck effect. Sensors and Actuators, 10(3), 321-346.• 2. Harman, T. C., Cahn, J. H., & Logan, M. J. (1959). Measurement of thermal
conductivity by utilization of the Peltier effect. Journal of Applied Physics, 30(9), 1351-1359.
• 3. Iue.tuwien.ac.at. 2013. 3.5.12 Seebeck Coefficient. [online] Available at: http://www.iue.tuwien.ac.at/phd/mwagner/node47.html [Accessed: 20 Sep 2013].
• 4. Douglas-self.com. 2013. Thermo-Electric Generators. [online] Available at: http://www.douglas-self.com/MUSEUM/POWER/thermoelectric/thermoelectric.htm [Accessed: 20 Sep 2013].
• 5. Thermoelectrics.caltech.edu. 2013. History of Thermoelectrics. [online] Available at: http://www.thermoelectrics.caltech.edu/thermoelectrics/history.html [Accessed: 20 Sep 2013].
• 6. Kasap, S. (2001). Thermoelectric effects in metals: thermocouples. Canada: Department of Electrical Engineering University of Saskatchewan.
![Page 28: Generating Thermo-electricity using Graphit and Aluminum module](https://reader036.vdocuments.us/reader036/viewer/2022062503/5880a6b51a28abd8158b788d/html5/thumbnails/28.jpg)