general catalog general catalong rev 11_09.pdf · preventing waste—not simply recycling...
TRANSCRIPT
When you only want the best, we’ll be there.
GENERAL CATALOG
PR
OUDLY MADE IN
THE USA FOR 60 YEA
RS
2683_2009VPIcatalogrevise.qxd 11/5/09 9:38 AM Page 1
2
The VPI Story
Since day one, it’s about quality, serviceand innovation
Whether you’re an architect, designer,distributor, or installer, you can depend on VPI to provide three important things:
1. Great flooring products
2. World-class service
3. Industry expertise and technical excellence
We’re known for the creation of the industry’s original static
control flooring— Conductile® and Statmate™— way back in
1949. We’re also known for precision and quality in all of our
products: flooring tile, wall base, rubber flooring, and accessories
to complete the job.
Through the years, we’ve become more than just a flooring vendor,
but a partner and consultant. Maybe that’s because we hold our
products up to levels of performance that exceed industry norms.
The same goes for our people—you’ll see it first-hand in our
service and knowledge.
Today, we continue to offer the industry’s best flooring products
and everything that goes with them: The best choices, options,
warranties, and service. From stringent testing procedures and
quality checks to incredible precision in the end product, it’s what
you expect, and what we demand.
So whether this is your first specification of VPI products
or if you’ve been counting on us for decades, one thing
remains true:
When you only want the best, we’ll be there.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:38 AM Page 2
3
Seeing Green
Just How Green Is Green? VPI Goes to the Next Level.Our up-front focus on quality means our products aredurable and tough, with a very long life cycle in theirintended applications. The result? A diminished need to extract new resources and expend energy in themanufacture of replacement products.
It’s certainly no surprise that environmental concerns havecome to the forefront of virtually every aspect of modernlife. At VPI, we remain committed to this importantdirective, and fully understand the role we play working in partnership with you.
We also understand that environmentalresponsibility is a complex subject, oftenrequiring us to consider many differentperspectives.
When manufacturers tout the benefits ofrecycling, they often overlook the impact of the recycling process: Energy isconsumed, waste is created, and additionalresources are used. Granted, this process mayuse less energy and resources than creating newproducts, but an overall negative impact on theenvironment is often the result. So while recycling istypically presented as an environmentally responsiblepractice, there’s a bigger question: Isn’t continued useof a high-quality product better than recycling?
Sustainability Is ParamountConsider a typical paper coffee cup, one that’s made ofrecycled material and is also recyclable. Unquestionably, it offers sound environmental responsibility. But isn’t aceramic mug—one that can be used repeatedly fordecades—an even better environmental choice?Preventing waste—not simply recycling waste—is the realsolution to a healthy planet. Unlike many flooring productsavailable today, our tile lasts decades, not just a few years.And that means replacement and recycling isn’t required. Instead, we offer sustainability, a solution that makes sensefrom financial and environmental perspectives. Simply, our belief is that while recycling is better than throwingsomething away, the greenest solution is using a productthat lasts and lasts.
Our Facility: Setting the Standard • We generate almost no waste for landfills (less than
2%). All product trim and rework is reused within the product, other products, or used within othermanufacturing processes.
• We don’t use heavy metals in pigments or stabilizers.• We meet all applicable guidelines of the State
of Wisconsin’s progressive environmental and refuse laws.
• We recycle water used in the manufacturing processin a closed-loop system.
• We use recycled packaging for our products,containing up to 100% recycled content.
Our Products: Sustainability for the Long Haul
• Durability and outstanding qualityprovides a long life cycle, without theneed to use new products.
• No waxing requirements means noenvironmental impact from waxing, and no damage caused by corrosivestripping.
• Most of our adhesives have zero to very low emissions of Volatile OrganicCompounds (VOCs). (Please refer toour website for specific details.)
Our Standards: More than Just a PromiseYear after year, we maintain our commitment to strict eco-compatible manufacturing, packaging andrecycling programs. Unlike others, we’ve made sure our compounds contain no asbestos, cadmium, CFCs, lead or formaldehyde. Simply, at VPI, giving customers eco-friendly options is our way of doing business.
How a quality product that’s built to last is ultimately the best environmental choice
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 3
4
Static Control Flooring
Product Standards That Lead the Industry
TOXICHEAVY METAL
TOHEAVY
TALLEADLEADMADE INTHE USA UV
RESISTANT
As the first-ever manufacturer of static control flooring, we bringexperience and insight no one else can match. Developed decadesago and in continual refinement, Conductile® and Statmate™ are stillthe premier static flooring solutions on the market. In fact, VPIStatic Control Tile installed over 60 years ago still performs to thesame specifications as the day it was installed, retaining itsconductive and dissipative properties indefinitely. For applicationsthat require electrostatic discharge protection and/or low outgassing(like electronics assembly, health care, and clean rooms), VPI StaticControl Flooring is a perfect choice.
FeaturesComplianceVPI tiles meet or exceed all federal, ASTM and ESDAssociation specifications for electrical resistance. Afterinstallation, a Certificate of ESD Compliance can alsobe issued for complete peace of mind in the mostdemanding and critical applications.
Lifetime “forever” electrical warrantyOur ESD tiles are guaranteed to work as long as the tileis installed!
75-year wear warrantyVPI tiles are warranted for 75 years regarding failuredue to workmanship or materials. This is the longestwarranty in the industry for any resilient floor.
Top-quality materialsVPI ESD control tiles are made only from certifiedhigh-quality materials to assure a lifetime of reliableand consistent technical performance.
Superior physical resistanceOur ESD tiles can endure loads of up to 2,500 psioffering unmatched durability. They offer a lifetime ofabrasive resistance to chipping and marring, unlike otherproducts with lower vinyl content.
Extreme resistance to many chemicalsIncluding betadine, acids, strong alkalis, alcohols, aliphaticsolvents and a variety of organic and synthetic fats.
Eco-consciousnessVPI tiles are the greenest resilient tiles on the markettoday. Sustainable and earth friendly, VPI tiles createless carbon foot printing through the product lifecycle
than many other more expensive, lower quality “greenwash” products.
Ease of installation and a beautiful appearanceConforming to subfloor irregularities without crackingor breaking, our “Micro Squared” highly flexible tilesare extremely easy to install. And after installation, theappearance simply blossoms. In fact, many customerschoose our tiles when they don’t need static control—just a great-looking floor that lasts a lifetime andrequires very little maintenance.
Variety of installation choices:12 x 12 x 1⁄8
24 x 24 x 1⁄8
36 x 36 x 1⁄8
Pre-grooving available (24’s and 36’s only)Access flooring tiles available
Adhesive is includedAll orders include appropriate amounts of VPI #150Conductive Epoxy Adhesive or VPI #160 ConductiveAcrylic Adhesive.
No copper strip grid requiredThe VPI system only requires a single two-foot copperstrip every 2,000 square feet to ensure completegrounding. Other ESD systems require an extensivegrid system to be installed before tile installation.
No wax requirementsUnlike other flooring tiles, our static control tiles do not require wax or glaze to maintain their electricalproperties. No wax is also great for the environment.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 4
PLATINUM 17
ROSE 905
LIGHT BROWN 904
LIGHT BLUE 909
BLACK 901
WHITE 902
RUST 924
SANDSTONE 913
DARK BROWN 914
OFF WHITE 912
JADE 918
GRAY 906
LIGHT GRAY 916
DARK GRAY 915
BLACK ICE 10
WHITE 2
RAIN FOREST21
WINTER W
HITE 152
PATRIOT92
GLACIER 9
EGGPLANT30
BONE 153 SeamlessInstallation
Choose from 13 colors of Seam Welding Bead to
complement our tile.
For static control flooring productspecifications and performanceproperties, see pages 18–19.
5
CLOUD 16
STORM 93
L E E D C R E D I T SVPI Tile contributes towards:IEQ Credit 4.1 – Low-emitting materials: VPI #150 and #160 adhesives – 0 VOCIEQ Credit 4.3 – Low-emitting materials: VPI tile is FloorScore certifiedMR Credits 4.1, 4.2: Recycled content: 10.4% pre-consumer recycled contentMR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
Note: Due to color variations in printing, please refer to actual samples for accurate color.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 5
6
With the same physical and installation properties, there are key differences between VPI Conductile® and Statmate™ ESD tiles:
Static Control Flooring
Conductive Tile• 25,000 to 1,000,000 ohms resistance• Fastest static decay—up to 20 times
faster than static dissipative tiles• For use with highly sensitive
equipment and critical applications• Suited for printed circuit and chip
manufacturing• 2,500 psi load rating
Static Dissipative Tile• 1,000,000 to 100,000,000 ohms
resistance• Slower static decay—up to 20 times
slower than conductive tiles• Not for use with highly sensitive
equipment and critical applications• Not suited for uses with exposed
circuits or chips• 2,500 psi load rating
Conductile® vs. Statmate™: Which Is the Right Tile for You?
To understand the differences and the choices between staticdissipative and conductive tiles, it’s important to understandthe history of static control flooring.
Originally, VPI invented “no-wax” static control tile back inthe late 1940s, primarily as a spark arresting floor. Althoughthe newly invented floor material reduced static electricity,the real focus was on preventing sparking in hospitaloperating rooms.
Equally important, in the 1950’s and even into the 1960’s,many buildings were not properly grounded. To provideprotection against shock hazards, we evolved our staticcontrol tile into no-wax “static dissipative” tile, branded as STATMATE™. This new material quickly became astandard in many facilities and is frequently used today insome high-voltage applications and/or where inadequategrounding could be a concern.
Then a new challenge emerged. As high-tech electronicsmanufacturing became common, smaller and faster systems were more susceptible to damage caused by static electricity—and thus required much greater protection.For the first time, static levels imperceptible to humans couldactually cause significant problems for sensitive electronics.The hallmark “shock” we traditionally felt was far and abovethe levels that would damage and disrupt electronicsmanufacturing.
Continuing its mission as an industry leader, VPI addressedthis issue by inventing no-wax conductive tiles, branded asCONDUCTILE®. With up to 20 times greater protectionthan all other waxed static dissipative tile, impregnated tilesor poured static dissipative options, CONDUCTILE® set thestandard in the industry, and continues to do so today.
So which one to choose? Static dissipative tiles arerecommended where electronic equipment is operated—for example, in control rooms or computer server rooms.Alternatively, conductive flooring is recommended for areaswhere electronic components (such as circuit boards) areeither serviced or manufactured.
While there are some limited exceptions, ESD flooringexperts increasingly support the viewpoint that conductiveflooring can and should be used everywhere.
In today’s world, highly sensitive components need moreprotection, electronic equipment is much better insulated and grounded than it was in the past, and a flooringinvestment should be preserved well into the future.Therefore, CONDUCTILE® is the optimal solution in most applications.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 6
7
Wall BaseWhen you want a product with a level of quality thatassures your creative vision will last a lifetime—whether installed in an office, conference room,classroom or hallway—choose VPI Wall Base.
With superb flexibility, scratch and scuff resistance,stringent specifications, quality control checkpointsthroughout each phase of production, and superiorperformance properties that meet the requirements ofdesigners and installers, our Wall Base products meetvirtually any challenge.
No lead or heavy metals
Ribbed back designFor more secure adhesion
Porous backingAllows quicker, better adhesion
UV resistanceWon’t fade like some other products on the market
Tougher surface finishesLooks better longer because of thicker, denser pigmentation
Quick and easy installationWith superior flexibility, our Wall Base is quick and easy to install
Matching outside cornersUnlike other brands, our outside cornersare guaranteed to match every time
Micro-Squared™ “up” cutsMinimize joint visibility
No color drift/no dye lotsEnjoy stable color consistency over time,especially important when installing preformed outside corners
Consistent height and toe dimensionsAssures premium and professionalappearance
Reinforced coveFor greater durability in the toughestapplications
Compliance with ASTM standards...for flame spread (ASTM E84), smokedensity and development (ASTM E662),critical radiant flux (ASTM E648), andhardness, dimensional stability andchemical resistance (ASTM F1861)
SpecificsRubber (TPR)1⁄8" Gauge Vinyl1⁄8" and .080" Gauge Rolls or Lengths21⁄2", 4", or 6" heightsCove (Toe) or Straight (Toeless)
Product Standards That Lead the Industry
MADE INTHE USA UV
RESISTANT
As a standard VPI design feature, thereinforced toe providesadditional strength fortougher applications.
To ease installation and ensure a snug fit from top to toe,VPI Wall Base has aribbed back forming a mechanical key forpositive and lastingadhesion.
L E E D C R E D I T SVPI Wall Base contributes towards:IEQ Credit 4.1 – Low-emitting materials: VPI #600 adhesive – 0 VOCIEQ Credit 4.3 – Low-emitting materials: VPI Wall Base is FloorScore certifiedMR Credits 4.1, 4.2: Recycled content: 32% pre-consumer recycled contentMR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
For Wall Base product specifications and performance properties see page20.
TOXICHEAVY METAL
TOHEAVY
TALLEADLEAD
Features
Serving the Flooring Industry
for over 60YEARS
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 7
8
Wall Base
SPRING G
REEN 31
CYPRESS 16
MARIN
ER GREEN 3
4
IVY
89
MIN
TLE
AF 38
RAIN F
OREST93
PATRIOT
56
STORM 1
3
LIGHT
TEAL17
TEALDUSK 1
5
OLIVE G
ROVE 37
PICKLE
69
ROYALBLU
E 08
MOROCCAN B
LUE 11
AURORA09
MEDIT
ERRANEAN
BLUE 1
2
INKW
ELL21
ARCTIC N
IGHT
29
LONDON G
RAY98
FIELD
STONE 2
6
BUFFALO
NIC
KEL06
ALLOY
33
PEWTER 0
4
CHARCOALSLA
TE 03
TUDOR GRAY
86
LONDON F
OG 05
SILVER S
ABLE 3
6
DOVE GRAY
46
CHARCOAL66
GRAPHITE 3
5
All Colors Available in:• TPR (Rubber) or Vinyl
• Heights of 21⁄2", 4" or 6"
• Cove (toe) or Straight (toeless)
• 4' lengths or 96', 120' and 160' rolls
• 1⁄8" Gauge (TPR Rubber or Vinyl)
• .080" Gauge (Vinyl)DARTM
OOR SHALE
02
JET
01
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 8
9
SAHARA23
FAW
N 97
PAPYRUS 74
MIL
KWEED 3
2
POLARIS
67
EGG SHELL
49
CAFÉ AU L
AIT48
MUSTA
RD SEED 7
9
CORDITE 4
2
TAN 6
0
SUN RAY
45
DIJON 4
7
SMOKE 6
3
CAMELB
ACK 70
NUTBROW
N 57
CLUB C
HAIR 4
1
SPICE 4
3
TOAST50
TAUPE 1
4
TERRACOTTA80
ROASTED C
HESTNUT
39
BURNTUM
BER 54
BLACK B
ROWN 9
4
CHOCOLATE 6
4
CAPPUCCINO 9
0
SANDSTONE 40
TAUPE M
IST
24
MANHATTA
N TAUPE 2
2
RUBYROUGE 2
5
RED COAT
51
PLUM
WIN
E 59
RAISIN
83
ALSATIA
N BERRY
20
CLAYM
ORE 27
LAVENDER C
RUSH 19
LIGHT
OLIVE 9
2
MIN
T30
EGGPLANT
10
Super Match Colors are colorcoordinated and available inrubber tile, rubber treads, wallbase and accessories.
For Wall Base product specifications and performance properties see page20.Note: Due to color variations in printing, please refer to actual samples for accurate color.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 9
Rubber Flooring
10
Decorative Rolled Flooring
PERIWIN
KLE 8
32
FRESH LIL
ACS 831
CRUSHED GRAPES 8
30
SOFTSKIN
829
CREAMY
PEACH 828
TEALSURPRIS
E 824
MIS
TYGREEN 8
25
SPRING D
AY82
6
SPARKLING S
UN 827
SEAWEED 8
23
MARSHY
GREEN 822
RAINY
DAY81
8
SPARKLING W
ATER 817
CLOUDY
DAY81
9
STONE RID
GE 820
FADED G
LORY
821
STARRY
NIGHT
816
MID
NIGHT
BLUE 8
15
ROCK ISLA
ND 812
ROUGH BARK 8
11
GARDEN PATH 8
13
SPICY
BROWN 8
14
SOFTSAND 8
10
SANDYBEACH 8
09
HEAVENLYTA
UPE 808
QUARTZITE 8
05
BLENDED S
TONE 806
THICK F
OG 804
MIX
ED GRAPHIT
E 802
BURNTSIE
NNA80
3
SPOTTED FAW
N 807
MAJE
STIC B
LACK 8
01
Note:: Due to color variations in printing, please referto actual samples for accurate color.
VPI Decorative Rolled Rubber Flooring is as easy on theeye as it is to install. With an array of calming color tonesand patterns, you can address the critical applications ofsensitive medical spaces. And since there are fewer seamsfor bacteria and microbes to gather and grow, it’s a perfectchoice for healthcare facilities and daycare operations.From safety perspectives, we’ve got you covered:
Our rubber flooring is void of harmful asbestos, cadmium, CFCs, formaldehyde or halogens. In addition to pleasingaesthetics, 1200 psi load resistance ensures remarkabledurability and toughness for years and years. Comes in rolls approximately 60" x 50', with matching rubberwelding bead available separately.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 10
Rubber Flooring
3511⁄16" x 3511⁄16" (905 mm x 905 mm)
Micro-Squared™
1713⁄16" x 1713⁄16" (452 mm x 452 mm)
Slate0.125" (3.17 mm)
11
CALM S
EAGREEN 7
30
CUCUMBER 7
31
SEATURTLE
736
BLUE M
OON 729
MIS
TYFA
LLS 7
28
ALMOND B
EIGE 7
24
ROCKYROAD 7
23
SMOKY
BREEZE 725
SEAM
IST
726
RAIN C
LOUD 7
27
WIN
TER WHEAT
722
REDWOOD 7
21
MIL
KWEED 7
09
DESERTKHAKI 7
07
SANTAFE 7
10
ORANGE BLO
SSOM 7
20
GRAYQUARTZ 7
06
CELTIC
BRUSH 7
05
MYSTIC
BLU
E 702
MARIN
ER GREEN 3
4
SAND OF A
RABIA70
0
MOROCCAN B
LUE 11
CHARCOALSLA
TE 03
LONDON F
OG 05
GRAYFLA
NNEL70
1
DARTMOOR S
HALE 0
2
Decorative Slate
For Rubber Flooring product specifications andperformance properties see page 21–22.
L E E D C R E D I T SVPI Rubber Adhesives contributes towards IEQ Credit 4.1 – Low-emittingmaterials: VPI #225 adhesive (low VOC) and #100 adhesives (0 VOC).For more information visit us at www.vpiflooring.com.
VPI Decorative Slate Flooring is the perfect choice for high-traffic walkways in healthcare facilities, schools, offices andlobbies. With low-noise characteristics, fire resistance, andlow-smoke density, our ADA-compliant rubber flooring givesyou the performance you need while maintaining the designintegrity you desire.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 11
12
Note: Due to color variations in printing, please refer to actual samples for accurate color.
3511⁄16" x 3511⁄16" (905 mm x 905 mm)Micro-Squared™
1713⁄16" x 1713⁄16" (452 mm x 452 mm)Hammered
0.125" (3.17 mm)
Sports Flooring
JET 01 LONDON FOG 05 MOROCCAN BLUE 11 FOREST GREEN 733 CAFÉ AU LAIT 48
BLUE M
OON 729
MIS
TYFA
LLS 7
28
CALM S
EAGREEN 7
30
CUCUMBER 7
31
SEATURTLE
736
RAIN C
LOUD 7
27
SEAM
IST
726
ROCKYROAD 7
23
WIN
TER WHEAT
722
ALMOND B
EIGE 7
24
SMOKY
BREEZE 725
REDWOOD 7
21
ORANGEBLO
SSOM 7
20
SANTAFE 7
10
GRAYQUARTZ 7
06
DESERTKHAKI 7
07
CELTIC
BRUSH 7
05
GRAYFLA
NNEL70
1
MYSTIC
BLU
E 702
MIL
KWEED 7
09
SAND OF A
RABIA70
0
Rubber Flooring Decorative Hammered Flooring
For Rubber Flooring product specifications andperformance properties see page 21–22.
Our Decorative Hammered Flooring creates a current of ebband flow, giving any environment a continuous distinctivestyle. It’s ideal for high rolling traffic areas like health carefacilities, school hallways and conference centers. Integralfor smoke, fire and noise resistance, and a critical componentfor creative space fabrication.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:39 AM Page 12
MOROCCAN BLUE 11 RUBY ROUGE 25 ROASTED CHESTNUT 39 SAND CASTLE 44 CAFÉ AU LAIT 48
JET 01 DARTMOOR SHALE 02 CHARCOAL SLATE 03 PEWTER 04 LONDON FOG 05
FALL HARVEST 52 BURNT ORANGE 53 DOLPHIN BLUE 58 OLIVE GREEN 61 LIME GREEN 62
SEA GREEN 65
VPI Classic Raised Round Flooring offers perpetual motifs that complement even the most challenginginteriors. With superior impact resistance, it’s an excellent choice for high-traffic areas, includingbuilding entrances and exits.
Super Match Colors are color-coordinated and available in rubber tile, rubber treads, wall base and accessories.
3511⁄16" x 3511⁄16" (905 mm x 905 mm)Micro-Squared™
1713⁄16" x 1713⁄16" (452 mm x 452 mm)Round
0.125" (3.17 mm)
LIGHT TAUPE 735
VPI Sports Flooring is built to succeed where others fail. Made of thefinest pressure-sensitive compounds and anti-scratch attributes, SportsFlooring is the preferred choice in arenas, clubhouses and locker roomsworldwide. Two profiles, square edge or interlocking designs, andmultiple color choices offer a winning combination for any sports floor.
Interlocking Edge35" x 35" (889 mm x 889 mm)
Sports0.281" (7.5 mm)
Rubber Flooring Classic Raised Round Flooring
13
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 13
14
FALL HARVEST 52 BURNT ORANGE 53 DOLPHIN BLUE 58 OLIVE GREEN 61 LIME GREEN 62
SEA GREEN 65
MOROCCAN BLUE 11 RUBY ROUGE 25 ROASTED CHESTNUT 39 SAND CASTLE 44 CAFÉ AU LAIT 48
DARTMOOR SHALE 02 CHARCOAL SLATE 03 PEWTER 04 LONDON FOG 05
Offering the ultimate in resilience, VPI Harsh Environment Flooring is impervious to toxicchemicals, abrasions and grease, and includes enhanced safety properties. Now even the mostforeboding interiors can become more inviting and striking. Minimum production requirements apply for all Harsh Environment Flooring. Inquire for stock and availability.
3511⁄16" x 3511⁄16" (905 mm x 905 mm)Micro-Squared™
1713⁄16" x 1713⁄16" (452 mm x 452 mm)Harsh Environment
0.125" (3.17 mm)
TACTILESpecial Order
DECK POINTSpecial Order
3511⁄16" x 3511⁄16" (905 mm x 905 mm)
0.125" (3.17 mm)
3511⁄16" x 3511⁄16" (905 mm x 905 mm)Pattern height = 1.03 mm Overall Thickness = 3.17 mm
0.125" (3.17 mm)
3511⁄16" x 3511⁄16" (905 mm x 905 mm)
Tactile Deck Point
Specialty Flooring
LARGE SQUARESpecial Order
CLASSIC RAISEDSQUARE
Special Order
Special order items have minimum production requirements. Available in the same16 colors as Classic Raised Round Flooring. Inquire for complete details.
Micro-Squared™
1713⁄16" x 1713⁄16" (452 mm x 452 mm)
Pattern height = 0.635 mm Overall Thickness = 3.17 mm
0.125" (3.17 mm)
3511⁄16" x 3511⁄16" (905 mm x 905 mm)
Square
Rubber Flooring Harsh Environment Flooring
Note:: Due to color variations in printing, please refer to actual samples for accurate color.
JET 01
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 14
15
Decorative and Classic Stair Treads
Regular, Round Profile
Regular, Square Profile**
Decorative and Classic Stair Treads for the Visually Impaired*Harsh Environment Stair Treads for the Visually Impaired*
One Piece Tread/Riser Combination, Round Profile
Decorative and Classic Stair Treads for the Visually Impaired*
Regular, Round Profile
Regular, Square Profile**
Nosing
Stringer/Riser Combination
*Carborendum Strip Colors: White, Glowing White, Yellow, Red or Jet.** Minimum production requirements apply.
Our collection of accessories is color-coordinatedwith most VPI Rubber Flooring patterns. Simplifystairwell installations with a one-piece StairTread/Riser combination, or select from our largeportfolio of regular stair treads. All accessories are available in the same 16 colors as the ClassicRaised Round Flooring.
RUBBER STAIR TREADS
Product Standards That Lead the Industry
TOXICHEAVY METAL
TOHEAVY
TALMADE INAMERICA LEADLEAD
Rubber Flooring Rubber Stair TreadsStringers/Risers, Nosing
1/8"
1/8"
Radius1/4" 1/8"
1-7/
8"
12-3/8"
1/8"
1/8"
Radius1/4" 1/8"
1-7/
8"
12-3/8"
3/32"1/8"
1/8"
1-7/
8"
One-Piece Stair Tread for General Applications.19"
Radius1/4"
1/8"
Radius1/4" 19"
1/8" 3/32"
1-7/
8"
One-Piece Stair Tread for the Visually Impaired.
1/8"1-7/8"
3"
3/8"
10-1/4"
.081"
Serving the Flooring Industry
for over 60YEARS
Decorative and Classic Stair TreadsClassic Stair Treads for Harsh Environments
One Piece Tread/Riser Combination, Round Profile
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 15
16
No part of your floor needs to be stronger and more rugged than the transitions.Why? Because they take nearly constant abuse. Gurney wheels. Carts. Handtrucks.Heels. While flooring tiles lay flat and wall base stands upright, the transitions takethe brunt of day-to-day wear. That’s why our manufacturing objective is simple:Build the toughest transition products on the market.
Proprietary TP Rubber formulations and the longest warranty in the industry meanyou can depend on any of our transitions products for even the most rigorousapplication. With tight tolerances for a snug fit, they’re shrink-proof, crack-proof,and won’t fade—even in direct sunlight.
ACC18M Metal Track with Pins (aluminum finish, no color) 20 pieces/carton, Length: 12'
11⁄4"
1"
ACC01Tile-Carpet Joiner 1⁄8"20 pieces/carton, Length: 12'
1⁄8"1⁄4"
11⁄4"
ACC02Carpet Reducer 1⁄4" 20 pieces/carton, Length: 12'
1⁄4"2"
ACC14Underslung Reducer20 pieces/carton, Length: 12'
1⁄8"
15⁄8"
ACC05 Snap-Down Divider 11⁄2" 20 pieces/carton, Length: 12'
11⁄2"
1⁄2"11⁄16"
ACC07MPinless Metal Track (aluminum finish, no color)20 pieces/carton, Length: 12'
11⁄4"
1⁄8"1⁄4"
3⁄4" 13⁄8"
15⁄8"
ACC12Resilient-Carpet Joiner20 pieces/carton, Length: 12'
5⁄16"
ACC03Carpet Reducer 5⁄16" 20 pieces/carton, Length: 12'
5⁄16"115⁄16"
1
ACC15Reducer Strip 1⁄4"20 pieces/carton, Length: 12'
1⁄4"
11⁄4"
ACC17 Snap-Down Divider 2" 20 pieces/carton, Length: 12'
2"
7⁄8"
ACC13Carpet Cove Cap 20 pieces/carton, Length 12'
5⁄8"
5⁄16"
11⁄2"
ACC09Tile Reducer Strip 1⁄8"50 pieces/carton, Length: 3'
1"1⁄8"
ACC04 Snap-Down Divider 11⁄8" 20 pieces/carton, Length: 12'
11⁄8"
7⁄16"
1⁄2"
ACC16 Snap-Down Divider Low Profile 11⁄2" 20 pieces/carton, Length: 12'
11⁄2"
5⁄8"
ACC06Cove Stick (natural color only)20 pieces/carton, Length: 12'
7⁄8"
7⁄8" ACC20Stair Nosing20 pieces/carton, Length: 12'
13⁄8"
11⁄8"
1⁄8"
Installation Accessories
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 16
Don’t settle for “close enough” or a color that’s almost a match. At VPI, eventhough we offer a rainbow of color choices, we’ve also made sure that popularcolors are available for the entire job—including the accessories. Choose fromthese seven colors to ensure a dead-on match to your floor tiles, wall base andrubber treads.
Super Match
RAIN F
OREST93
RAISIN
83
BLACK B
ROWN 9
4
FAW
N 97
CHARCOAL66
TOAST50
CAFÉAU L
AIT48
INKW
ELL21
SAHARA23
TAUPE 1
4
LONDON F
OG 05
MOROCCAN B
LUE 11
ROASTED C
HESTNUT
39
PEWTER 0
4
CHARCOALSLA
TE 03
JET
01
MOROCCAN B
LUE 11
LONDON F
OG 05
ROASTED CHESTNUT
39
CAFÉAU L
AIT48
PEWTER 0
4
CHARCOALSLA
TE 03
JET
01
Note: Due to color variations in printing, please refer to actual samples for accurate color.
Super Match Colors are color coordinated andavailable in rubber tile, rubber treads, wall baseand accessories.
17
Super Match Colors are color-coordinated and available in rubber tile,rubber treads, wall base and accessories.
L E E D C R E D I T SVPI Installation Accessories contributes towards MR Credits 5.1, 5.2: Regional materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
Color Coordinated Across Full Product Line
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 17
18
Properties and Specs
Static Control Flooring Performance Properties
* Adhesive and trowel size depends on sub floor. Please refer to VPI’s Installation and Maintenance Instructions for proper trowel size selection.
** VPI’s Exclusive Warranty is valid only when tile is installed with VPI #150 Conductive Epoxy or VPI #160 Conductive Acrylic Adhesive. * New and longer term Betadine stains can be removed from VPI floors by
using abrasive buffing pads during the cleaning process. Please see the VPI web site for details.
ELECTRICAL/ELECTROSTATIC PROPERTIESESD STM 7.1: Resistance of
Flooring Materials
Point to Point & Point to GroundASTM F-150: Point to Ground 1,000,000 –
Electrical Resistance 25,000 – 1,000,000 100,000,000 Ohms Ohms
AATCC–134: Electrostatic Propensity < 12 Volts < 30 Volts
FTMS 101C: Static Decay, Method 4046
at 15% RH
OTHER PROPERTIES ASTM F-1700: Solid VinylFloor Covering MaterialsANSI/UL 779: Electrically
Conductive Floor CoveringsNFPA 101: Life Safety Code
ASTM E-648: Critical Radiant Flux CRF (W/cm2)
ASTM E-662: Smoke DensityASTM E-84: Fire Resistance
( (Steiner Tunnel)
ASTM F-970: Static Load
NFPA 99: Standard for Health Care Facilities
ASTM F-925: Chemical Resistance
CONSTRUCTIONHomogeneous solid vinyl tile that has
encapsulated conductive elements of the carbon family distributed
throughout the structure.Gauge 1⁄ 8" (3mm)
12" x 12", 24" x 24", 36" x 36" Custom sizes, pre-grooved available
INSTALLATION
Adhesive* & Spread Rate
Trowel Size*
Adhesive* & Spread Rate
Trowel Size*
Grounding Material(Supplied with order)
Maintenance
Free from defects inworkmanship and materials
Electrical Performance **
CONDUCTILE® STATMATE™
Conforms
Meets UL Standard
Passes
> 1.0 W / cm2
< 450
< 75 (Class I)
< 0.001" RI @ 250 psi (1.125" dia. ft.)2,500 psi @ 0.005” RI (0.5” dia. ft.)
Passes
Excellent (Acids, Alkalis, Household Chemicals)
VPI 150 Conductive Epoxy Adhesive covers approx. 135 sq. ft/gallon
1/16”x 1/16” Square Notch with 1/16”Flats OR 1/16” Half Circular Notch
with 1/32” Flats
VPI 160 Conductive Acrylic Adhesivecovers approximately 135 square
feet/gallon1/8” V-Notch with 1/16” Flats
One 2”x 24” copper strip installed every 2,000–2,500 sq. ft.
No Wax
75 year Warranty
Lifetime Warranty
Composition
Size
Conforms
5,000 – 0 Volts in< 0.01 seconds
5,000 – 0 Volts in< 0.20 seconds
Static Control Flooring Chemical Resistance Properties
per ASTM F925 Methodology
Chemical 1 Minute 24 Hour
Acetic Acid Conc. 0 SA2
Acetone SA1 SA3
Household Ammonia 0 0
Ammonium Hydroxide 20% 0 0
Amyl Acetate 0 SA3
Acetonitrile SD1 SA3
Benzene 0 SA2
Betadine* 0 CC3
Butyl Alcohol 0 SA2
Butyl Methyl Ether 0 SA1
Buffer, phenol red CC2 CC3
Carbon Tetrachloride 0 SA1
Chloroform 0 SA2
Creosote CC2 CC3
Cresol 0 SA3
Dichlormethane 0 SA1
Dimethyl Sulfoxide SA3 SA3
Dimethyl Formamide SA1 SA3
Ether SD1 SD3
Ethyl Acetate 0 SA3
Ethyl Alcohol 0 0
Ethyl Ether 0 SA1
Forane - 113C SD3 SA2
Forane - 113E SD2 SA2
Forane - MES SD2 SA2
Formaldehyde 40% 0 0
Freon 0 0
Unleaded Gasoline 0 0
Hexane SD1 SA1
Heptane SD1 SA1
Hydrochloric Acid 5% 0 SA2
Hydrochloric Acid 36% 0 SA3
Hydrochloric Acid Conc. 0 SD1
Hydrofluoric Acid Conc. 0 0
Categories:SD = Surface Dulling -
loss of glossCC = Color Change -
discoloration, bleaching, staining, etc.SA = Surface Attack -
softening, warping, blistering, etc.
Chemical 1 Minute 24 Hour
Hydrogen Peroxide 30% 0 SD1
Hydrogen Chloride 0 SA1
Iodine CC1 CC3
Isopropyl Alcohol 0 SD3
Kerosene 0 SA1
Methyl Alcohol 0 0
Methyl Ether Ketone SA1 SA3
Methylene Chloride SA3 SA3
Methyl -2-pyrrolidone SA1 SA3
Mineral Oil 0 0
Nitric Acid 5% 0 SA2
Nitric Acid Conc. 0 SD3
Olive Oil 0 0
Perchloroethylene SD3 SA3
Phenol 0 SA2
Silver Nitrate 5% 0 CC3
Sodium Hydroxide 5% 0 0
Sodium Hydroxide 50% 0 0
Sodium Metasilicate 0 0
Sulfuric Acid 5% 0 0
Sulfuric Acid 77% 0 CC2
Sulfuric Acid Conc. 0 CC2
Tetrahydrofuran SA3 SA3
Turpentine 0 CC2
Thimerosal 0 CC3
Toluene SD3 SA3
Tribasic Sodium Phosphite 0 0
Trichloroethane SA3 SA3
Trichloroethylene SA1 SA2
Triethylamine 0 CC2
Trifluoroacetic Acid 0 SA2
Vinegar 0 0
Xylene 0 SA2
Ratings0 = No change1 = slight change2 = moderate change3 = severe change
For more information visit www.vpif looring.com
WARRANTY
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 18
Static Control Flooring SpecificationsGENERAL
REFERENCESA. ASTM F-1700: Solid Vinyl Floor TileB. ASTM F-150-06: Electrical PropertiesC. ESD STM 7.1-2001 Electrical PropertiesD. ANSI/ASTM FISCO: Electrical Properties of Static Control FlooringE . ANSI/UL 779: Electrically Conductive FlooringF . NFPA 99: Standard for Health Care FacilitiesG. NFPA 101: Life Safety CodeH. ASTM E-662: Smoke DensityI. ASTM E-648 / NFPA 253: Fire ResistanceJ. ASTM E-84: Fire Resistance (Steiner Tunnel)
WARRANTYA. Provide manufacturer’s warranty under provisions of Section [01700l.] [01740.]B. Warranty: Include a 5-year warranty that products are free from defects in materials and workmanship. Include lifetime warranty for electrical resistance.
PRODUCTS
ACCEPTABLE MANUFACTURERSA. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALSA. Conductive Resilient Floor Tile: Electrical Resistance; 25,000 – 1,000,000 ohms; VPI Conductile®: 12”x 12”, 24”x 24” & 36”x 36” square edge; 24”x 24”
& 36”x 36” pre-grooved; available in 1/8” (3mm) thickness, color selected.B. Static Dissipative Resilient Floor Tile: Electrical Resistance; 1,000,000 – 100,000,000 ohms; VPI Statmate™: 12”x 12”, 24”x 24” & 36”x 36” square edge;
24”x 24” & 36”x 36” pre-grooved; available in 1/8” (3mm) thickness, color selected.MANUFACTURING TOLERANCES
A. Micro-Squared™ 12”x12” tile to plus or minus 0.002” inch; cut vertical edges perpendicular to tile surface.B. Precision control gauge to assure consistent surface with no high edges.
ADHESIVESA. Flooring Adhesives: VPI #150 Conductive Epoxy or VPI #160 Conductive Acrylic Adhesive as required for specific use.B. Use trowel and roller specified in the Installation and Maintenance Instructions as required per specific use.
EXECUTION
EXAMINATIONA. Verify that stranded ground wire is in place at floor-wall juncture, and is properly connected to ground OR a steel column in area is suitable for grounding.
CONSULT WITH MANUFACTURER FLOOR PREPARATION GUIDE FOR PRECAUTIONS WHEN SUBSTRATE IS LIGHTWEIGHT AGGREGATE CONCRETE, MAGNESITE FLOORING, OR FOR BELOW-GRADE CONDITIONS.
B. Verify that concrete sub floors on- or below-grade are installed over a suitable moisture retardant membrane.C. Ensure concrete floors are dry and exhibit alkalinity levels between 5 & 9 pH with adequate carbonization and no dusting.
Maximum moisture-emission: 5 lbs./1,000 sq. ft./24 hours. MOISTURE TESTS ARE RECOMMENDED.
D. Ensure floor surfaces are smooth and flat with maximum variation of 1/8 inch in 10 feet.E. Ensure floor surfaces are clean and free from dust, paint, oil, grease, curing agents, parting compounds, surface hardeners, sealers, solvents, old adhesives and other
extraneous substances.F. Beginning of installation means acceptance of surface and conditions.
INSTALLATIONA. Install flooring in accordance with manufacturer’s printed instructions.
GROUNDINGA. Connect copper grounding strip provided by VPI to a stranded ground wire, cut off excess and recess into the wall.
ORB. Ground to a column or beam by drilling and tapping the column and affixing the grounding strip to the column in accordance with the manufacturer’s instructions.C. Lay the balance of the grounding strip into the adhesive covering it with additional adhesive. Install the flooring over the grounding strip.
PROTECTIONA. Prohibit traffic on finished floor for 48 hours after installation.
CLEANINGA. Remove excess adhesive from floor, base, and wall surfaces without damage, while adhesive is still wet.B. Clean floor and base surfaces in accordance with manufacturer’s instructions.
STATIC CONTROL SYSTEMA. Precisely distributed conductive elements provide through-tile conductivity.B. Conductive adhesive links elements and provides tile-to-tile conductivity.C. The tile and adhesive create a pathway of moderate electrical conductivity to ground.
FIELD QUALITY CONTROLA. Test completed instructions by representative in presence of Architect and Owner; in accordance with the test procedures of ESD STM 7.1, NFPA 99 or ASTM F-150.
K. ASTM D-3389: Abrasion ResistanceL. ASTM D-2240: HardnessM. ASTM D-2047: Static Coefficient of FrictionN. ASTM F-970: Static LoadO. ASTM D-297: DensityP. ASTM D-412: TensileQ. ASTM D-412: ElongationR. ASTM D-624: Tear DieS. ASTM F-925: Chemical ResistanceT. ASTM F-1515: Light AgingU. ASTM F-1514: Heat Aging
19
L E E D C R E D I T SVPI Tile contributes towards:IEQ Credit 4.1 – Low-emitting Materials: VPI #150 & #160 adhesives – 0 VOCIEQ Credit 4.3 – Low-emitting Materials: VPI Tile is FloorScore certifiedMR Credits 4.1, 4.2: Recycled Content: 10.4% pre-consumer recycled contentMR Credits 5.1, 5.2: Regional Materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 19
20
GENERAL
REFERENCESA. ASTM F 1861-02: Wall Base – Vinyl Type TV; TPR (Rubber) Type TP
WARRANTYA. Provide manufacturer‘s warranty under provisions of Section [01700.] [01740.]B. Warranty: Include one year warranty that products are free from defects in
materials and workmanship.
PRODUCTS
ACCEPTABLE MANUFACTURERSA. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALSA. Base: [ASTM F 1861-02] VPI Wall Base; top set coved, [21⁄2] [4] [6] inches high,
[1⁄8] [0.080] inch thick, color [selected.] [scheduled.] (Rubber available in 1⁄8 inchgauge only.)
Pricing for wall base is determined by color. Specify color.
MANUFACTURING TOLERANCES A. Precision control gauge to assure smooth surface with no high edges.
ADHESIVESA. Wall Base adhesive: VPI No. 600 Acrylic Copolymer Wall Base Adhesive
qualifies for LEED Credit IEQ Credit 4.1: Low-Emitting Adhesives (0 VOC).
ENVIRONMENTALA. No lead.B. No heavy metals.C. Qualifies for LEED Materials & Resources Credits 4.1 & 4.2: Recycled Content
(32% Pre-Consumer Content)..
EXAMINATIONA. Ensure contact wall surface to 1⁄2 inch below top of base is clean and free
from dirt, paint, oil, grease, wall covering, old adhesives, and other extraneoussubstances.
B. Beginning of installation means acceptance of surfaces and conditions.
INSTALLATIONA. Fit top set base joints tight and vertical. Install base on solid backing;
adhere tightly to wall surfaces. Miter and form internal and external cornersas detailed in manufacturer’s installation and maintenance instructions.(www.vpiflooring.com)
B. Scribe and fit to door frames and other obstructions.
PROTECTIONA. Prohibit traffic on finished floor for 48 hours after installation.
CLEANINGA. Remove excess adhesive from floor, base, and wall surfaces without damage,
while adhesive is still wet.B. Clean floor and base surfaces.
* The use of any other adhesive will void VPI’s warranty.
PROPERTY VINYL – Wall Base TPR (RUBBER) – Wall BaseTEST DATA
ASTM 1861-02 Conforms Conforms
Flame Propagation (UL 992) <2.0 <2.0
Smoke Density Test (ASTM E 662) <450 <450
Critical Radiant Flux (ASTM E 648 or NFPA 253) Class I (>0.45 W/cm2) Class I (>0.45 W/cm2)
CONSTRUCTION
Composition High grade resin, thermoplastic binders, fillers, and pigments High grade resin, thermoplastic binders, fillers, and pigments
Gauge 1⁄8" .080" 1⁄8" Feet Per Carton (1 length = 4')
21⁄2" or 4" 120' Lengths 120', Rolls 160' 120'6" 96' 96' 96'
Height 2 1⁄2", 4", 6" 2 1⁄2", 4", 6"
Style Cove or Straight Toe Cove or Straight Toe
Outside Corners 2 1⁄2", 4", 6" (30 per carton) n/a 2 1⁄2", 4", 6" (30 per carton)Environmental No lead, no heavy metals. Wall Base qualifies for LEED Materials & Resource Credits 4.1 & 4.2: Recycled Content
(32% Pre-Consumer content). Adhesive qualifies for LEED IEQ Credit 4.1: Low emitting Adhesives (0VOC).
INSTALLATION
Adhesive & Spread Rate #600 Wall Base Adhesive; Covers approximately: #600 Wall Base Adhesive; Covers approximately: 75 linear feet of 4" base per 30 oz. cartridge 75 linear feet of 4" base per 30 oz. cartridge
275 linear feet of 4" base per gallon 275 linear feet of 4" base per gallon1100 linear feet of 4" base per 4 gallon container 1100 linear feet of 4" base per 4 gallon container
Trowel Size 3⁄32" x 3⁄32" triangular notch with 3⁄32" flats. 3⁄32" x 3⁄32" triangular notch with 3⁄32" flats. If applying adhesive with cartridge gun, use a 2-hole If applying adhesive with cartridge gun, use a 2-hole
nozzle for a 2 1⁄2", 3-hole nozzle for a 4", nozzle for a 2 1⁄2", 3-hole nozzle for a 4", and a 5-hole nozzle for 6". and a 5-hole nozzle for 6"
WARRANTY
One Year*
Wall Base Performance Properties
Wall Base Specifications
Properties and Specs For more information visit www.vpif looring.com
L E E D C R E D I T SVPI Wall Base contributes towards:IEQ Credit 4.1 – Low-emitting Materials: VPI #600 adhesive – 0 VOCIEQ Credit 4.3 – Low-emitting Materials: VPI Wall Base is FloorScore certifiedMR Credits 4.1, 4.2: Recycled Content: 32% pre-consumer recycled contentMR Credits 5.1, 5.2: Regional Materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 20
Rubber Flooring Performance Properties
Gauge
Sizes
Profiles & Colors
0.125"
3511⁄16" x 3511⁄16"
1713⁄16" x 1713⁄16" Micro-Squared™
Decorative Slate
Decorative Hammered
Classic Raised Round
Classic Raised Square
Large Square
Deck Point
3.17 mm
905 mm x 905 mm
452 mm x 452 mm Micro-Squared™
26 colors
21 colors
16 colors
16 colors
16 colors
16 colors
ASTM F-1344 - Std Specification for Rubber Floor Tile
ASTM E-648 / NFPA 253 - Fire Resistance
Critical Radiant Flux CRF (W/cm2)
ASTM E-662 - Smoke Density
ASTM E-84 - Fire Resistance (Steiner Tunnel)
New York State Fire Prevention Code
New York City Fire Prevention Code
ASTM D-3389 - Abrasion Resistance (H-18 500g @ 1,000 cycles)
ASTM D-2240 - Hardness
ASTM D-2047 - Static Coefficient of Friction
ASTM F-970 - Static Load (modified)
ASTM D-297 - Density
ASTM D-412 - Tensile
ASTM D-412 - Elongation
ASTM D-624 - Tear Die
ASTM F-925 - Chemical Resistance
ASTM F-1515 - Light Aging
ASTM F-1514 - Heat Resistance
Adhesive VOC (Volitale Organic Content)
Limited Wear Warranty
Exceeds Requirements
Class 1
<1.10
Class 1 ≤ 450
Class 2
Filed in Compliance w/ Article 15, Part 1120
Accepted under Section 27-348
0.5g
≥ 85 Shore A.54 (with specified conditioner)
1,100 psi
1.72 g/cc
1,000 psi
170%
190 lb/in
Complies (Available on request)
Better than ΔE = 8.0
Better than ΔE = 8.0
Very Low
10 Years
DECORATIVE SLATE, DECORATIVE HAMMERED, CLASSIC RAISED ROUND/SQUARE
Gauge
Wear Layer/Backing
Size
Profiles & Colors
Resistance to Golf Spikes, Cleats and Skateboards
Safety
ASTM D-2240 - Hardness Shore A
Cigarette Burn Resistance
Limited Wear Warranty
0.281" overall
2 mm Natural rubber/5.5 mm Recycled Rubber
35" x 35" (889 mm x 889 mm)
Slate (Square Edge or Interlocking), 6 colors
Excellent
Compliant to ADA Guidelines
85
Excellent
5 Years
7.5 mm overall
SPORTS FLOORING
Gauge
Size
Profiles & Colors
Recycled Content
ASTM F-1859 - Rubber Sheet Flooring W/O Backing
ASTM E-648 - Critical Radiant Flux CRF (W/cm2)
ASTM E-662 - Smoke Density
ASTM E-84 - Fire resistance (Steiner Tunnel)
ASTM D-3389 - Abrasion resistance
ASTM F-970 - Static Load
ASTM F-1515 - Light Aging
ASTM F-1514 - Heat Aging
ASTM D-2047 - Static Coefficient of Friction
Limited Wear Warranty
Maintenance
0.080"
60" x 50' approx. (1.5 m x 15.2 m) roll
Paper textured look; 32 colors
Recycled post-manufacturing decorative chips
Complies - Type 1
> 0.45 - Class 1
≤ 450
Class 2
Exceeds Requirements
Complies/Exceeds
Complies
Complies
Meets and Exceeds ADA Guidelines
10 years
No Wax
2 mm
DECORATIVE ROLLED
Gauge
Sizes
Profiles & Colors Round Low Profile With Chamfered Edges - 16 colors
HARSH ENVIRONMENT
3.17 mm Stud Height: 0.5 mm
910 mm x 910 mm
454 mm x 454 mm Micro-Squared™
0.125"Stud Height: 0.020"
3513⁄16" x 3513⁄16"
177⁄8" x 177⁄8" Micro-Squared™
Stair Treads Available in 36", 48" and 72" Lengths
ASTM D-471 - Oil & Grease Resistance
ASTM F-925 - Resistance to Chemicals
ASTM D-2240 - Hardness Shore A
ASTM E-648 - Critical Radiant Flux
ASTM E-84 - Flame Development
ASTM E-662 - Smoke Density
ASTM D-3389 - Abrasion Resistance Taber Abrasion(H-22 Wheel @ 1000 Cycles / 1.0 Kg Load)
ASTM D-2047 - Static Coefficient of Friction
Cigarette Burn & Solder Resistance
Limited Wear Warranty
VOCs (Volatile Organic Content)
ASTM Oil #1: Excellent ASTM Oil #3: Excellent
Excellent (Acids, Alkalis, Solvents)
≥85
≥0.45
Class 1
≤450
Exceeds Requirements
Exceeds ADA Guidelines
Excellent
10 Years
Very Low
Rubber Flooring SpecificationsGENERAL
All VPI Rubber Flooring; Decorative Slate, Decorative Hammered, Classic Raised Round and Square shown on the finish schedule, or otherwise listed here within, shall be furnishedby VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081. All VPI Rubber Flooring shall comply with ASTM F-1344 and meet Class 1 Fire Rating Standards as tested to ASTME-648/ASTM E-662 and ASTM E-84, Class 2. All VPI Rubber Flooring shall be (specify: Decorative Slate, Decorative Hammered, Classic Raised Round and Square) profiles in 1713⁄16" x 1713⁄16" (452 mm x 452 mm) Micro-Squared™ or 3511⁄16" x 3511⁄16" (905 mm x 905 mm) sizes and 0.125" (3.17 mm) thickness in the color(s) specified.All VPI Harsh Environment Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081.All VPI Harsh Environment Flooring shall comply with ASTM F-1344 and meet Class 1 Fire Rating Standards as tested to ASTM E-84, ASTM E-648/ASTM E-662. All VPI Harsh Environment Flooring shall be (specify: Round) profile in 177⁄8" x 177⁄8" (454 mm x 454 mm) or 3513⁄16" x 3513⁄16" (910 mm x 910 mm) sizes and 0.125" (3.17 mm) thickness in the color(s) specified.All VPI Decorative Rolled Rubber Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI53081. All VPI Decorated Rolled Rubber Flooring shall comply with ASTM F-1859 and meet Class 1 Fire Rating Standards as tested to ASTM E-648/ASTM E-662 and ASTM E-84 Class2. All VPI Decorative Rolled Rubber Flooring shall be 60" x 50' (1.5 m x 15.2 m) size and 0.080 (2.00 mm) thickness in the color(s) specified.All VPI Sports Flooring shown on the finish schedule, or otherwise listed here within, shall be furnished by VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081. All VPISports Flooring shall comply with ASTM F-1344. All VPI Sports Flooring shall be 35" x 35' (889 mm x 889 mm) 0.281" (7.5 mm) thickness in the color(s) specified.INSTALLATION & MAINTENANCE
All VPI Rubber Flooring, Decorative Slate, Decorative Hammered, Classic Raised Round and Square, Decorative Rolled Rubber, Harsh Environment and Sports Flooring must be installedin accordance with manufacturer’s specifications, including subfloor preparation and recommended adhesive. Refer to “VPI Rubber Flooring Installation and Maintenance” for completedetails. Copies can be obtained by calling 800-874-4240, at www.vpiflooring.com, or by writing: VPI Corporation, 3123 South 9th Street, P.O. Box 451, Sheboygan, WI 53082-0451.
.67 (bare floor surface)
21
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 21
22
Rubber Flooring Chemical Resistance Properties
per ASTM F925 Methodology
Immersion Time
Chemical 1 Minute 24 HourBetadine cleanser (povidone 7.5%) No change Slight change
Betadine solution (povidone 10%, iodine 1%) Slight change Stain
Coal tar (bitumen) Slight stain Stain
Household ammonia solution (5%) No change No change
Household bleach solution (5.25%) No change Whitening
Hydrochloric acid solution (5%) Very slight discoloration Discoloration
Iodine solution (tincture of iodine 2.5%) Yellow stain Yellow stain
Kerosene Yellow stain Slight Swelling
Olive oil (light) No change No change
Phenol (5%) No change No change
Phenox #6925 – 5% as recommendedPhenolic germicidal detergent (o-phenyphenol 0.45% No change No changeo-Benzyl-p-Chlorophenol 3.30%)(contains: 0.48% / 3.30%) Lalema
Phenox #6925 – pure solution 100%Phenolic germicidal detergent(o-phenyphenol 0.48% No change No changeo-Benzyl-p-Chlorophenol 3.30%)(contains: 0.48% / 3.30%) Lalema
Polyquat #6750 – 1% as recommendedGermicidal fungicidal virucidal detergent No change No change(Didecyl dimethyl ammonium chloride)(contains: 3.85%) Lalema
Polyquat #6750 pure solution 100%Germicidal fungicidal virucidal detergent(Didecyl dimethyl ammonium chloride) No change No change
(contains: 3.85%) Lalema
Rubbing alcohol (70%) No change No change
Silver nitrate (normal) Brown stain Dark brown stain
Sodium Hydroxide solution (5%) No change No change
Sulfuric acid solution (5%) Very slight discoloration Discoloration
Unleaded gasoline (regular grade) Slight swelling Swelling
Wright’s Blood Stain** - applied directly to floor Blue Stain Blue Stain
White mineral oil (medicinal grade) No change No change
White vinegar (5%) No change No change
Note: Tests have been done on #33 color gray compound. The results can vary for other colored products.
GENERAL
REFERENCES A. ASTM F-1344: Rubber Floor Tile B. ASTM E-648: Fire Resistance C. ASTM E-662: Smoke Density D. ASTM E-84: Flame Development E. ASTM D-3389: Abrasion Resistance
WARRANTY A. Provide manufacturer’s warranty under provisions of Section [01700.]
[01740.] B. Warranty: Include a 10-year warranty that products are free from
defects in materials and workmanship.
PRODUCTS
ACCEPTABLE MANUFACTURERS A. VPI Corporation, 3123 South 9th Street, Sheboygan, WI 53081
FLOOR COVERING MATERIALS A. Rubber Stair Treads: [ASTM F-1344] [VPI Rubber Decorative and Classic
Stair Treads][VPI Rubber Classic Stair Treads for Harsh Environments][VPI Rubber Decorative and Classic Stair Treads for the VisuallyImpaired][VPI Rubber Harsh Environment Stair Treads for the VisuallyImpaired]; [One-Piece, Round Profile][Regular, Round Profile][Regular,Square Profile]; [19 5⁄16" by 36, 48 or 72"][12 3⁄4" by 36, 48 or 72"] by 0.138" thick; color [selected.]
B. VPI Rubber Stringer/Riser Combination; 10 1⁄4" x 24' with a 3⁄8" toe by 0.081" thick; color [selected].
C. VPI Rubber Nosing; 3" x 1 7⁄8" x 12' x 0.125" thick; color [selected.]
MANUFACTURING TOLERANCES A. Precision control gauge to assure consistent surface with no high edges.
ADHESIVES A. Flooring Adhesives: [VPI No. 225 Acrylic Adhesive] [VPI No. 100 Solvent
Free 2pt. Epoxy Adhesive][VPI No. AS-M or AS-L Adhesive Tape] as required for specific use.
EXECUTION
EXAMINATION Consult with manufacturer Installation & Maintenance Instructions forflooring preparation, and Floor Preparation Guide for precautions whensubstrate is lightweight aggregate concrete, magnesite flooring, or for below-grade conditions. A. Verify that concrete sub floors on- or below-grade are installed over a
suitable moisture retardant membrane. B. Ensure concrete floors are dry and exhibit alkalinity levels between
5 & 8 pH with adequate carbonization and no dusting. Maximum moistureemission: 3 lbs./1,000 sq. ft./24 hours. Moisture tests are recommended.
C. Ensure floor surfaces are smooth and flat with maximum variation of 1⁄8 inch in 10 feet.
D. Ensure floor surfaces are clean and free from dust, paint, oil, grease,curing agents, parting compounds, surface hardeners, sealers, solvents,old adhesives and other extraneous substances.
E. Beginning of installation means acceptance of surface and conditions.
INSTALLATION A. Install stair treads in accordance with manufacturer’s printed instructions. B. Use adhesive recommended by floor tile manufacturer.
PROTECTION A. Unless VPI No. AS-M or AS-L adhesive tape is used, prohibit traffic on
finished floor for 48 hours after installation.
CLEANING A. Remove excess adhesive from floor, base and wall surfaces without
damage, while adhesive is still wet. B. Clean stair treads, stringer/riser and nosing surfaces in accordance with
manufacturer’s instructions.
Rubber Stair Treads, Stringer/Riser Combination, Nosing
Specifications
Properties and Specs For more information visit www.vpif looring.com
L E E D C R E D I T SVPI Rubber Adhesives contributes towards IEQ Credit 4.1 – Low-emittingMaterials: VPI #225 adhesive (low VOC) & #100 adhesives (0 VOC)For more information visit us at www.vpiflooring.com.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 22
23
PROPERTIES PERFORMANCE
Durometer (ASTM D 2240)
Flame Propagation (UL 992)
Smoke Density Test (ASTM E 662)
Flame Spread (ASTM E 84)
Critical Radiant Flux (CRF)(ASTM E 648 or NFPA 253)
Chemical Resistance (ASTM F 925)
Slip Resistance (ASTM D 2047)
CONSTRUCTION
Composition
Environmental
Gauge
Linear Feet per Carton
Width
INSTALLATION
AdhesiveAdhesive Application
Adhesive Coverage
Installation Accessories Performance Properties
83 +/- 3 Shore A
< 2.0
< 450
Class II
Class I (> 0.45 W/cm2)
Passes
0.5 SCOF
Thermoplastic rubber/vinyl alloy,binders, fillers and pigments
No lead or other toxic heavy metals
Varies; precision control to ensure fit
Inquire; usually 240
Varies
#180 Contact Cement*Brush; both surfaces
120 SF/1Gal. or Approx. 2 Cartons/1 Gal.
GENERAL
WARRANTY A. Warranty: Includes one-year warranty that products are free from defects in materials
and workmanship.
PRODUCTS
ACCEPTABLE MANUFACTURERS A. VPI Corporation, 3123 South 9th Street. P.O. Box 451, Sheboygan, WI 53082-0451
MANUFACTURING TOLERANCES A. Precision control gauge to assure consistent surface with no high edges.
ADHESIVES A. Accessories adhesive: VPI #180 Contact Cement.
ENVIRONMENTAL A. No lead.B. No heavy metals.
MATERIAL A. Thermoplastic Rubber (TPR)/Vinyl Alloy to ensure durability.
TECHNICAL PERFORMANCE A. Hardness: ASTM D 2240 – Shore A Durometer 83 +/- 3B. Fire Resistance: ASTM E648/NFPA 253 – Critical Radiant Flux – Class 1C. Smoke Density: ASTM E 662 - <450D. Chemical Resistance: ASTM F 925 – PassesE. Slip Resistance: ASTM D 2047 – 0.5 SCOF
EXECUTION
EXAMINATION A. Ensure sub-floor is clean and free from dirt, paint, oil, grease, old adhesives and other
extraneous substances.B. Beginning of installation means acceptance of surfaces and conditions.
INSTALLATIONA. Sub-floor and Accessories shall be maintained at a temperature of at least 65F for 24 hours
before installation.B. Cut to proper length.C. Follow instructions on VPI #180 label.D. Avoid getting adhesive on visible surfaces.E. Roll accessories after installation with a hand roller to ensure good bonding.
PROTECTION A. Prohibit heavy traffic for 24 hours after installation.
CLEANING A. Clean with mild detergent and water or Isopropanol.B. Do not use solvents to clean transitions.
Installation Accessories Specifications
(Transitions, Joiners, Reducers, Cove Cap & Cove Stick)
L E E D C R E D I T SVPI Installation Accessories contributes towards MR credits 5.1, 5.2:Regional materials: Manufactured in Sheboygan, WIFor more information visit us at www.vpiflooring.com.
* Compatibility and performance using any other adhesive cannot beguaranteed by VPI Corporation.
The Need for LEEDHow the LEED Standard Encourages Sustainable Building Practices and Materials
The Leadership in Energy and Environmental Design (LEED)Green Building Rating System is a voluntary standard thatprovides a number of norms and practices for environmentallysustainable construction. The LEED standard does several things:
• It defines the term “green building” by establishing acommon standard of measurement
• It promotes integrated, whole-building green designpractices
• It recognizes environmental leadership in the buildingindustry
• It stimulates green competition• It raises consumer awareness of green building benefits• It transforms the building market with greater
environmental awareness
LEED-certified buildings use key resources more efficientlywhen compared to conventional buildings. LEED-certifiedbuildings provide healthier work and living environments, whichcontributes to higher productivity and improved employee healthand comfort. Different versions of the rating system are availablefor specific types of construction projects. For example, differentversions exist for new construction, existing buildings,commercial interiors, homes, schools, and so forth.
The LEED Scoring System and CertificationThe different LEED versions use a point scoring system, basedon an array of formalized standards in six major categories:
• Sustainable Sites (SS)• Water Efficiency (WE)• Energy and Atmosphere (EA)• Materials and Resources (MR)• Indoor Environmental Quality (IEQ)• Innovation and design process (I)
After passing a minimum required point level, LEED certificationbecomes more detailed. For instance, in LEED NC v2.2 (newconstruction) there are 69 possible points. When the points aretallied,a building can qualify for one of four levels of certification:
Certified: 26-32 points. (The lowest level of certification).Silver: 33-38 pointsGold: 39-51 points
Platinum: 52-69 points. (The highest level of certification).
Throughout this catalog, LEED credits are indicated next to eachproduct.
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 23
Surfacing EverywhereHealthcare | Electronics | Education | General Purpose
For more information visit us at www.vpiflooring.comContact us at 800-874-4240 or email [email protected]
VPI Corporation3123 South 9th Street, P.O. Box 451, Sheboygan, WI 53082-0451Phone: 920-458-4664 Fax: 920-458-1368
Complete product information including: architect’s material specifications, installation instructions and maintenance,recommended adhesives, code and regulation compliance, warranty information and more is available at www.vpiflooring.com.
VPI Product samples are available upon request:
Phone: 800-874-4240 Fax: 920-451-5894 E-mail: [email protected] Visit: www.vpiflooring.com
Static Control Flooring Wall Base Rubber Flooring Accessories
11MK8015-11/09
2683_2009VPIcatalogrevise.qxd 11/5/09 9:40 AM Page 24