general care and safety guide - kiwislovegoldair.co.nz · • the dehumidifier must not be located...
TRANSCRIPT
This page is intentionally left blank.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an externalswitching device, such as a timer, or connected to a circuit that is regularlyswitched on and off by the utility.• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience andknowledge, unless they are supervised or have been given instructionconcerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with theappliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, itsservice agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this dehumidifier. Covering this
dehumidifier presents fire risk and will activate the safety fuse; permanentlydisabling the unit.
WARNING: Do not use this dehumidifier in small rooms when they are
occupied by persons not capable of leaving the room on their own, unlessconstant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
flammable material a minimum distance of 1 metre from the air outlet.
General Care and Safety Guide
• Use only the voltage specified on the rating label of the appliance.• The dehumidifier must not be located immediately below a socket outlet.
• Keep all objects at least 1 metre from the front, sides and rear of the appliance.
• This appliance is intended for household use only and not for commercial or industrial use.
• Indoor use only.
• Use this appliance only as described in this manual. Any other use is not recommended bythe manufacturer and may cause fire, electric shock or injury.
• Do not use the dehumidifier if it has been dropped or damaged.
• The common cause of overheating is deposits of dust or fluff in the appliance. Ensure thesedeposits are removed regularly by unplugging the appliance and vacuum cleaning the airvents and grills.
• Always unplug appliance when not in use.
• When the appliance has been unpacked, check it for transport damage and ensure all partshave been delivered. If parts are missing or the appliance has been damaged, contact theCustomer Services Team.
• Do not use if there are visible signs of damage to the dehumidifier.
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
• Never cover the dehumidifier and/or use the appliance to dry clothes.• Do not connect the appliance to mains supply until completely assembled and adjusted.• Ensure hands are dry before handling the plug or main unit.• Ensure dehumidifier is on a flat, stable, heat-resistant surface.• Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to
become a hazard.• Carry out regular checks of the supply cord to ensure no damage is evident• Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical person forexamination, electrical service or repair.
• Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation toweaken and split. Always ensure that all cord has been removed from any cord storage areaand is unrolled before use.
• It is recommended that this dehumidifier is plugged directly into the wall socket. Powerboards are not rated to supply power to high wattage appliances.
• A correctly specified, undamaged extension cord may be used with this dehumidifierprovided it is used in a safe manner.
• Do not remove plug from power socket until the appliance has been switched off.• Do not remove plug from power socket by pulling cord; always grip plug.• Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot
be tripped over.• Don’t place appliance on bedding or on thick & long carpet where the openings may get
blocked.• Switch off and use handle provided when moving• Do not place appliance close to radiant heat source.• Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the appliance.• Do not sit on the appliance.• Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.• Do not operate in areas where petrol, paint or other flammable liquids are used or stored.• Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming
pool or other liquids.• The appliance must not be immersed in any liquids.• There are no user serviceable parts installed in the unit.• Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.• This unit is not supposed to be used in or around locations where foodstuffs, works of art or
delicate articles of science, etc. are stored.• If your appliance does not work, or is not working properly, contact the place of purchase or
the Customer Services Team.
General Care and Safety Guide
Operating Your Appliance
Always choose a safe location for the dehumidifier, keeping in mind the safetyprecautions outlined. Ensure all packaging has been removed from the unit before use.Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the
dehumidifier.
WARNING: Keep all objects at least 20cm away from all the sides of the
appliance.
WARNING: Do not use this dehumidifier with a programmer, separate
timer, remote-control system or any other device that switches thedehumidifier on automatically, since a fire risk exists if the dehumidifier iscovered or positioned incorrectly.
WARNING: Never leave this dehumidifier unattended.
Ensure the dehumidifier is on a flat, stable, heat-resistant surface.
Once the dehumidifier is in a safe operating position and all switches are in the offposition, insert the power plug into the mains outlet. This dehumidifier is designed tobe used indoors in residential / small office spaces only.
On first use, run the dehumidifier continuously for 24 hours.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheatthe plug and socket and could result in fire.
DEHUMIDIFIER CONTROL PANEL
POWER BUTTONThis turns the dehumidifier on and off.
MODE BUTTONSwitch between SMART / HIGH / LOW / and FAN modes.
• SMART Mode: Maintains the room at an ideal domestic environment humidity of 50-55% relative humidity (RH) while saving electricity. The compressor will work until the desired humidity is reached and then will stop. The unit will operate and remain in this mode by default when turned on. The desired humidity cannot be changed in this mode.
• HIGH FAN Mode: This mode ensures the air in the room is processed and RH is correctly measured with the operating at fan at a higher speed. Adjust your desired humidity level by using the Up and Down Buttons.
• LOW FAN Mode: This mode ensures the air in the room is processed and RH is correctly measured with the operating at fan at a lower speed. Adjust your desired humidity level by using the Up and Down Buttons.
• FAN Mode: This mode only uses the fan – No moisture will be extracted while this mode is in operation. Filters like the “UV” and “Plasma Ioniser” can be used in this mode to improve the quality of the air processed and emitted through the unit.
OSCILLATING BUTTONPress once to make the louvre swing. Press again to lock the louvres at 45 degrees, another press will lock them at 90 degrees. The lights will indicate which option is selected.
TIMER BUTTONWhen in standby, press the timer button and the use [UP] and [DOWN] buttons to adjust the timer (1-24hrs) to select in how many hours you want the unit to start. To set the timer for when you want the unit stop and turn off, use the [UP] and [DOWN] buttons while the unit is on.
HUMIDITY INDICATOR LIGHTThe indicator light will turn on automatically when the appliance is turned on.You can turn off the light by pressing the Humidity Indicator Button.
The colour of the light will change accordingly to the humidity condition:• Red: High Humidity – RH is over 80%• Green: Comfortable – RH is between 60-80%• Orange: Air is dry – RH is under 60%
Operating your Appliance
Close any windows and doors where the unit is running.
Ensure that the water container is positioned correctly.
UV LIGHT BUTTON (For Air Purification)Pressing this button turns on the “UV” function. The indicator light to the right of the button will illuminate when turned on. The germicidal UV light improves the air quality by destroying germs, bacteria, and fungi. To turn of the “UV”, press the button again.
PLASMA IONISER BUTTON (Ionisation Function)Pressing this button turns on the “Plasma Ioniser” function. The indicator light to the right of the button will illuminate to show that it is active. The ioniser can refresh the air while killing viruses, dust mites, mould, and airborne allergens. To turn off this function, press the button again.
UP / DOWN BUTTONSThe UP / DOWN buttons allow you to select your desired relative humidity levels in all modes except SMART mode. The default Relative Humidity is set to 55%. When a Relative Humidity of 35% is selected, the compressor will not stop until the water tank is full.
INTELLIGENT DEFROST LIGHTTo prevent ice from building within the unit, the appliance will defrost automatically if the coil sensor detects that the temperature is too low. The Defrost Indicator light will illuminate to show that it is active. Once the defrosting process has finished, the appliance will return to its previous running mode.
TANK FULL LIGHTThe Tank Full indicator light will flash red and the unit will beep if the water tank is full. Please empty out the water tank to allow the dehumidifier to continue operation. The light will also illuminate if the tank is incorrectly fitted.
OPERATION LIGHTThe Operation light will illuminate when the compressor inside the unit is running to extracting moisture from the air. NOTE: The indicator light may not illuminate immediately when the unit starts as it needs to warm up. The light will turn off once the desired humidity is reached.
DISPLAY• When the unit is plugged in, the display will indicate the room humidity level.• When one of the UP / DOWN buttons are pressed, it will display the humidity
level you desire to set. After a few seconds, it will revert to show the current humidity level.
• When the Timer Button is pressed, it will indicate in how many hours the timer function will operate. After a few seconds, it will revert to show the current humidity level.
CARBON FILTER (FOR AIR PURIFICATION FUNCTION) Take out the carbon filter from the bag and insert it on the filter. We recommend cleaning the carbon filter every 2-3 weeks using a vacuum cleaner and changing them every 3-6 months to keep the room fresh and odour free.
Operating your Appliance
Operating your Appliance
WATER DRAINAGEThere are two ways to dispense collected water:
Internal Water Tank (Picture 1)1. When this tank is full, the unit will automatically stop running, and the Tank Full Indicator light will
begin to flash red.2. Grip the tank by its handle securely and carefully pull it out.3. Empty the water tank and reinsert it into the dehumidifier. It will operate again once the tank is
securely back in place in the correct position.
DO NOT remove the tank immediately after the unit stops. Please wait a while to avoid water dripping into the unit thus, damaging the unit or cause an electrical hazard.
DO NOT remove or damage the float switch in the water tank. This will cause the machine to not work properly and can result in overflowing the tank.
Continuous Drainage (Picture 2)1. Cut off the cover for the continuous drain, located on the back of the unit.2. Pull out the water tank and connect a water tube or plastic pipe with a 10mm inner diameter (Not
included) to the drain continuous drain hole. Ensure that the connection is tight.3. Return the water tank back into its normal position within the unit.
This allows the water to be automatically plumbed in or drained into a sink, a larger receptacle, or through the wall into an outside drain.
NOTE: The unit uses gravity fall to dispose water, so the drain should be lower than the dehumidifier water outlet. To ensure smooth water flow, run the pipe downward and DO NOT bend the pipe.
Picture 1
Picture 2
Care and Cleaning
CARE AND CLEANINGThe dehumidifier requires regular cleaning to ensure trouble free operation:• Unplug the dehumidifier from the mains supply before cleaning.• Ensure that the dehumidifier has been allowed to cool down completely before
cleaning.• The common cause of overheating is deposits of dust or fluff in the appliance. Ensure
these deposits are removed regularly by unplugging the appliance and vacuumcleaning the air vents and grills.
• Use a damp cloth (not wet) to wipe the exterior of the dehumidifier to remove dustand dirt.
• Never use solutions such as petrol, thinners or polishing agents.• Ensure the dehumidifier is dry before plugging back into the mains supply.
To prolong the life of the compressor, we recommend that you to let the dehumidifierrest for at least 10 minutes after operation.
TO CLEAN THE AIR FILTER1. Unplug the appliance from the mains supply.2. Remove the filter and tap any loose dust off.3. Clean the filter with a vacuum or with water. Dry the filter.4. Ensure the filter is completely dry before placing back in the unit.
Never use unit without the air filter.
Do not attempt to dismantle the appliance. There are no user serviceable parts. Forservice or repair, contact an authorised electrical service technician.
STORAGETo store the unit, remove the plug from the socket and empty the water container.Allow the container and the appliance to dry completely. Clean the air filter. Store thedevice in a dust-free location, preferably covered with a sheet of plastic.
Setting up WiFi
• Select your country code
• Enter your cellphone number
• Tap “Next”
You will then receive a text message with a
verification code.
Tap REGISTER near the bottom of the screen.
Download Goldair mobile APP• Open the APP Store or Google Play on your mobile phone.• Open “Search” and enter “Goldair"• Click “GET” and begin to download and install.
Once downloaded to your phone open the APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz capable
Note this dehumidifier will only work within your home WIFI system.This does not operate on 3G or 4G internet connections.You will need a connection to your home Wi-Fi.
Setting up WiFi
• Enter the verification code from your text message
• Create a password.
• Then tap confirm.
If you haven’t received a verification code via text message. Tap the resend button and when the verification code is received follow above steps.
Your APP is now registered and ready for pairing to your dehumidifier.
Pairing APP to dehumidifier
On your phone tap “ADD DEVICE” to connect to the dehumidifier.
Turn on your dehumidifier and then press and hold the MODE Button on the dehumidifier. Release it after it beeps 3 times. The unit is now ready to connect to your WIFI Network.
Tap ‘Next Step” on the phone.
Pairing APP to Dehumidifier
When the phone interface shows the addition issuccessful, and the WIFI indicator on the dehumidifier will stop flashing.
The dehumidifier pairing is complete and the maincontrol screen on your phone will appear showingthe dehumidifier as ON.
If the phone and dehumidifier fail to connect, then you will need to try to connect again as per the above process.
Choose/confirm which WiFi to connect to.Note: your phone may pick up other WiFi signals (e.g. neighbours) so you will need to choose.
Enter your WiFi password
XXXXXX
The phone will then connect to the dehumidifier.Ensure you have a good strong signal from your WiFirouter.
Note: The WiFi indicator on the dehumidifier may go off during this pairing process.
Once complete the screen showing the device has been successfully added will appear.
Rename the dehumidifier if desired.
Tap “Done” to continue.
Operating your dehumidifier from the APP
You can rename the dehumidifier.Tap the ‘pen’ icon on the top right of the control screen of the APP to take you to the next page.
Click “Device Location” and assign a location to the dehumidifier. Example: Bedroom 1, Dining Room etc. and tap save.Use the arrow on top left to return to the operation screen.
DEVICE SHARING SET UPThe person you add will need to have the Goldair APP installed on their phone.
Open the ‘APP and choose the appliance. Tap the ‘pen’ icon in the top right of the screen.
Tap ‘Shared Devices’ to enter the number of the person you want to include or tap the phone icon to select the persons phone number from your contacts. Tap “Confirm” to complete the addition.
DEVICE SHARING CANCELLATIONTap ‘Shared Devices’ to delete the number of the person you want to cancelTap “Confirm” to complete the addition.
NOTE: There can only be one user operating the dehumidifier at a time. The APP needs to be closed on all other devices to enable the sharing to work.
NOTE: If someone else sets up their phone on the same dehumidifier without using the “Device Sharing” the original phone will be disconnected and the dehumidifier will disappear from the device list.
XXXXXX
Operating your Dehumidifier from the APP
Mobile phone remote operation (connect dehumidifier power and turn on the side switch, so that the dehumidifier is in standby mode).
Open the “GOLDAIR" APP to select the dehumidifier (when using one mobile phone to control multiple appliances, you need to select the dehumidifier to be operated).
• Select the dehumidifier to be operated and enter the operation interface.
If the phone interface color is dark green, this indicates that the dehumidifier is in the OFF/Standby setting.
• Tap the ON icon and the dehumidifier will turn on.The display will change to bright green.• You can now control the dehumidifier.
• To turn the dehumidifier off again tap the OFF icon and the dehumidifier will revert to the dark screen.
HUMIDITY SETTING:The required humidity can be set from 35-80%.Tap the ‘Set Humidity’ button and then scroll through to set the required humidity then press OK to return to the main screen.When the set humidity is lower than the relative humidity, the dehumidifier begins to operate.If the set humidity is above the relative humidity the dehumidifier will be in standby mode and will not operate until the relative humidity increases above the set humidity.The current humidity is shown in the middle of the main screen.
The current room temperature is displayed at the bottom right of the screen.
Dark Green – Unit is Off Bright Green – Unit is On
MODEMode can be set to Auto, Fan, High or Low.
Press the ‘Mode’ icon to set the required operating mode.Auto Mode: Maintains the room at an ideal domestic environment humidity of 50-55% relative humidity (RH) while saving electricity. The compressor will work until the desired humidity is reached and then will stop. The unit will operate and remain in this mode by default when turned on. The desired humidity cannot be changed in this mode.
Fan Mode: This mode only uses the fan – No moisture will be extracted while this mode is in operation. Filters like the “UV” and “Plasma Ioniser” can be used in this mode to improve the quality of the air processed and emitted through the unit
High Mode: This mode ensures the air in the room is processed and RH is correctly measured with the operating at fan at a higher speed. Adjust your desired humidity level by tapping the ‘Set Humidity’ button to scroll through and select your desired humidity.
Low Mode: This mode ensures the air in the room is processed and RH is correctly measured with the operating at fan at a lower speed. Adjust your desired humidity level by tapping the ‘Set Humidity’ button to scroll through and select your desired humidity.
IONISER BUTTON (Plasma Ionisation Function)Pressing this button turns on the “Plasma Ioniser” function. The ioniser can refresh the air while killing viruses, dust mites, mould, and airborne allergens.To turn off this function, press the button again.
UV BUTTON (For Air Purification)Pressing this button turns on the “UV” function. The germicidal UV light improves the air quality by destroying germs, bacteria, and fungi.To turn of the “UV”, press the button again.
HUMIDITY INDICATORThis turns the colour changing humidity indicator on the front of the unit on and off. The indicator will turn on automatically when the appliance is turned on.You can turn off the light by pressing the Humidity Indicator Button.
Operating your Dehumidifier from the APP
OSCILLATING BUTTONPress this button to set the louvre position at 45 degrees, 90 degrees or to oscillate between both positions.
Operating your Dehumidifier from the APP
Operating your Dehumidifier from the APP
TIMER (SCHEDULE)In the main APP screen, scroll down to find the Schedule button under the dehumidifier controls.Press this button to set smart timer.The timer in the APP has far more functionality than the timer button on the unit.
Press the button to add a ‘Schedule’, then press ‘Add Schedule’ at the bottom.Select whether you want the unit turn Off or On.You can then set down to the minute when you want the unit to turn off or on.You can also set the timer to ‘Repeat’ the for specific/multiple days.When you have finished your desired settings, press ‘Save” to confirm and go back to the main APP screen.
You can also set up a Timer Schedule when the unit is in the Off/Standby setting.Press Schedule and follow instructions above.
To remove a set schedule, long press on the schedule and press ‘Delete’ when the confirmation prompt comes up.
Important Note: Make sure the Smartphone or Tablet Clock that you are using has the right time you are providing from the connection network to the Internet. Possible delay or non-activation of the timer may becaused by an incorrect time setting on the device you are using.
Adding Additional Dehumidifiers
Choose/confirm which WiFi to connect to.Note: your phone may pick up other WiFi signals (eg. neighbours) so you will need to choose.
Enter your WiFi password
XXXXXX
From the “Devices” page of the APP press “Add Device” and follow the steps below to pair the new appliance.
Adding Additional Dehumidifiers
Your Devices list will then show the additional dehumidifier that you have paired
The phone will then connect to the dehumidifier.Ensure you have a good strong signal from your WiFirouter.
Note: The WiFi indicator on the dehumidifier screen may disappear during this pairing process.
Once complete the screen showing the device has been successfully added will appear.
Rename the dehumidifier if desired.
Tap “Done” to continue.
Troubleshooting
Please refer to the Goldair website
http://www.goldair.co.nz/product-catalogue/heating/wifi-dehumidifiersOr free phone 0800 232 633 (NZ Only)
http://www.goldair.com.au/product-catalogue/heating/panel-dehumidifiersOr free phone 1300 GOLDAIR (1300 465 324) (Australia Only)
Troubleshooting your Dehumidifier
Problem Cause Solution
Hot or cold air being produced Normal operation
When the unit is in dehumidifying mode, it absorbs humid air from room and freezes it to reduce humidity. During the cold cycle, there should be cold air coming out of the unit. During the defrost cycle, hot air should be coming out of the outlet grill.
Unit does not operateIs the plug properly inserted in the socket?
Insert the plug into the socket and turn the switch on.
Is the “Tank Full” Indicator red?
The water tank is full, float displaced, or the tank is not properly inserted. Empty the tank, check the float, and make sure the tank is properly inserted in the unit.
Front louvres do not openLouvre motor is blocked
Check if anything is blocking the louvre. Try to move the louvres up and down gently while the unit is off. If the above fails, return the unit to our service centre.
Dehumidifier does not extract water
Is the unit set to a humidity level lower than the one in the room?
Set the humidity level on the humidistat below current humidity reading.
Is the temperature too low for water extraction to be efficient?
Increase temperature in the room or reposition the unit.
Is any intake grill or discharge blocked? Is the unit too close to the walls?
Remove any obstructions and restart the uni.Ensure a distance of at least 20 cm between the unit and walls.
Airflow seems weakIs filter dirty or clogged?
Please service the filters regularly as per manual.
Unit is noisy during operationIs the unit on uneven surface?
Please place on flat horizontal surface. A carpeted surface under the unit will also help reduce the noise caused by vibrations from the compressor.
Is the filter clogged?
Please service the filters regularly as per user manual.
Troubleshooting your Dehumidifier
Problem Cause Solution
E3 or E4Humidity sensor error
Ensure filters are clean, and use the unit within prescribed humidity range. Unplug the unit, rest and plug it back in. If error repeats, call for service centre.
E1 or E2Temperature sensor error
Ensure filters are clean, and use the unit within the prescribed temperature range. Unplug the unit, rest and plug it back in. If error repeats, call for service centre.
E5 or E6
Abnormal Coil sensor temperature or current
Ensure filters are clean, and use the unit within the prescribed temperature range. Unplug the unit, rest and plug it back in. If error repeats, call for service centre.
Defrost light on Unit is defrosting
Allow the unit to automatically defrost. The protection will clear after the unit defrosts. Increase temperature in the room if this repeats too often.
Tank full red lightWater tank full notification
Tank is full or is not in the right position –empty the tank and replace it in the right position.
Any other malfunctions will need to be reported to the service centre. Do not attempt unauthorised repairs, as these may invalidate the warranty.
Goldair – New ZealandMonday – Friday 8am-5pmPhone +64 (0)9 917 4000Phone 0800 232 [email protected]
Goldair – AustraliaMonday – Friday 8am-5pmPhone +61 (0)3 9365 5100
Phone 1300 465 [email protected]
SUPPORT AND TECHNICAL ADVICE
TECHNICAL SPECIFICATIONModel No: GPDH440Supply: 220-240VAC 50HzMax Wattage: 370WRated Input Power: 240WUnit Capacity: 20.0L/day max (30℃/80%RH)Tank Capacity: 4.0LRefrigerant: R134a/160g
PROOF OF PURCHASETo receive warranty retain receipt as proof of purchase.
Thank you for purchasing this Goldair Platinum product. Your product is warranted against faults and manufacture when used innormal domestic use for a period of three years. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during thewarranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyoneother than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in relation to thegoods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to areplacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are alsoentitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to amajor failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
Three Year Warranty
Goldair Three Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date Of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair – New ZealandCDB GoldairPO Box 100-707N.S.M.CAuckland
Phone +64 (0)9 917 4000Phone 0800 232 633www.goldair.co.nz
Goldair – AustraliaCDB Goldair Australia Pty
PO Box 574South MorangVictoria, 3752
Phone +61 (0)3 9365 5100Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au