GeN2® NITROGEN GENERATOR

B L E N D E D G A S M I X E R

Dispensing draft beer with a mixed gas blend of

Carbon Dioxide (CO2) and Nitrogen (N2) helps

ensure the correct presentation and flavor. Quality

draft beer requires a precise, consistent supply

of Nitrogen and Carbon Dioxide. Chart’s GeN2®

Nitrogen Generator coupled with a Carbo-Mizer®

Bulk CO2 tank is the ideal system to provide the

correct blended gas mix. This system provides

a reliable, uninterrupted flow of individual or

mixed gas and eliminates the need to change out

smaller high pressure cylinders. The GeN2 system

brings industry leading technology to the nitrogen

generator for dependable, accurate, and cost

effective operation.

• MICROBREWERIES • BREW PUBS • RESTAURANTS • BARS

PRODUCT HIGHLIGHTS• Proven, continuous flow rate, rotary PSA system provides quick response to surge demands and eliminates the need for a large capacity N

2 storage

tank• Heavy duty compressor has a long lifecycle and is easy to maintain• Integrated, small five gallon surge tank reduces footprint and simplifies installation• Double hinged doors allow easy access for maintenance• Sleek, modern look blends with site decor• Self-diagnostic system helps service technicians identify scheduled maintenance or repairs

BeverageSystems

GeN2® NITROGEN GENERATOR

B L E N D E D G A S M I X E R

Chart Inc.U.S. : 1-800-247-4446Worldwide: 1-952-758-4484

©2017 Chart Inc.PN 20832858

www.chartbeverage.com

GeN2 Schematic

A INITIAL RELEASE NDG REV APPV ECR REVISION DESCRIPTION BY DATE

A

CHART INDUSTRIES, INC.CANTON, GEORGIA 30114

ORIGINAL ECR / ER

B-20786084DRAWING NO.

1 OF 11:16

NDG

B-20786084

N2 GENERATOR FINAL ASSEMBLYUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005

PROJ.ENGR.

CHECKED BY

DRAWN BY

REV:

DO NOT SCALEDRAWING

SHEET:SCALE:

DRAWING NO.

TITLE:

APP'VD DATE

PROJECT:

THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.

# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.

MAT'L

FINISH P/N

20786084

A INITIAL RELEASE REV APPV ECR REVISION DESCRIPTION BY DATE

NOMENCLATUREITEM DESCRIPTION PART NUMBER BUB SEQ #

V-1 NEEDLE VALVE 20807619 25V-2 PRESSURE REGULATING VALVE 20856482 12V-3 ISOLATION VALVE, CO2 IN 20733158 26V-4 ISOLATION VALVE, BACKUP N2 20733158 26V-5 ISOLATION VALVE, 70% BLEND 20733158 26V-6 ISOLATION VALVE, 25% BLEND 20733158 26V-7 ISOLATION VALVE, 100% N2 20733158 26V-8 CHECK VALVE, BACKUP N2 20807621 27V-9 CHECK VALVE, ATF INLET 20807621 27

RV-1 RELIEF VALVE, COMPRESSOR 20807543 29RV-2 RELIEF VALVE, TANK 20807543 29PI-1 PRESSURE INDICATOR, N2 20839423 45PI-2 PRESSURE INDICATOR, CO2 20806240 11T-1 SURGE TANK 20783899 7C-1 COMPRESSOR 20806217 10B-1 BLENDER 20858641 6

ATF-1 ATF 20752316 2M-1 N2 MANIFOLD 20839425 31HE-1 HEAT EXCHANGER, COIL HOSE 20806216 9AD-1 AIR DRYER 20806235 8PT-1 PRESSURE TRANSDUCER, COMPRESSOR N/A N/APT-2 PRESSURE TRANSDUCER, TANK N/A N/AF-1 AIR FILTER, COMPRESSOR 20808765 30S-1 SOLENOID VALVE 20856046 50

A

CHART INDUSTRIES, INC.CANTON, GEORGIA 30114

ORIGINAL ECR / ER

DRAWING NO.

1 OF 11:1

FINISH P/N

A-Draw1

MAT'L

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005

PROJ.ENGR.

CHECKED BY

DRAWN BY

REV:

DO NOT SCALEDRAWING

SHEET:SCALE:

DRAWING NO.

TITLE:

APP'VD DATE

PROJECT:

THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.

# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.

A-Draw1

Draw1

PT

PT

EXTERNAL

PT-2

PT-1

V-8

V-7

V-6

V-5

V-4

V-3

B-1

N2CO2PI-2PI-1

M-1

ATF-1

T-1RV-2

V-2

V-1

AD-1

HE-1

C-1RV-1

F-1

S-1

V-9

A INITIAL RELEASE NDG REV APPV ECR REVISION DESCRIPTION BY DATE

NOMENCLATUREITEM DESCRIPTION PART NUMBER

V-1 NEEDLE VALVE 20807619V-2 PRESSURE REGULATING VALVE 20856482V-3 ISOLATION VALVE, CO2 IN 20733158V-4 ISOLATION VALVE, BACKUP N2 20733158V-5 ISOLATION VALVE, 60% BLEND 20733158V-6 ISOLATION VALVE, 25% BLEND 20733158V-7 ISOLATION VALVE, 100% N2 20733158V-8 CHECK VALVE, BACKUP N2 20807621V-9 CHECK VALVE, ATF INLET 20807621

RV-1 RELIEF VALVE, COMPRESSOR 20807543RV-2 RELIEF VALVE, TANK 20807543PI-1 PRESSURE INDICATOR, N2 20839423PI-2 PRESSURE INDICATOR, CO2 20806240T-1 SURGE TANK 20783899C-1 COMPRESSOR 20806217B-1 BLENDER 20786777

ATF-1 ATF 20752316M-1 N2 MANIFOLD 20839425HE-1 HEAT EXCHANGER, COIL HOSE 20806216AD-1 AIR DRYER 20806235PT-1 PRESSURE TRANSDUCER, COMPRESSOR N/APT-2 PRESSURE TRANSDUCER, TANK N/AF-1 AIR FILTER, COMPRESSOR 20808765S-1 SOLENOID VALVE 20856046

A

CHART INDUSTRIES, INC.CANTON, GEORGIA 30114

ORIGINAL ECR / ER

B-Draw1DRAWING NO.

1 OF 11:2

NDG

B-Draw1

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005

PROJ.ENGR.

CHECKED BY

DRAWN BY

REV:

DO NOT SCALEDRAWING

SHEET:SCALE:

DRAWING NO.

TITLE:

APP'VD DATE

PROJECT:

THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.

# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.

MAT'L

FINISH P/N

Draw1

NOMENCLATURE