gems sensors & controls | level sensing techniques
DESCRIPTION
Gems™ Sensors & Controls is a leading manufacturer of level switches, pressure switches, pressure transducers, flow switches, miniature solenoid valves, proximity switches and liquid level control units for use in a broad range of fluids across industries.TRANSCRIPT
GEMS™ SENSORS & CONTROLS
Website: www.GemsSensors.com Call : 1-800-378-1600
LIQUID LEVEL SENSING TECHNOLOGIES
VARIOUS TECHNOLOGIES…..
Website: www.GemsSensors.com Call : 1-800-378-1600
Each of today’s liquid level sensing technologies excels in various roles and primarily includes the following types:
• Float or Buoyancy • Pressure• Conductivity • Load Cells• Capacitance • Piezo Resonant• Ultrasonic • Optical
FLOAT/BUOYANCY
Website: www.GemsSensors.com Call : 1-800-378-1600
Pros: Non-powered, proven, direct indicationCons: Invasive, contact fluids, moving partsTypical Applications: Water Tanks, saline, buffer, and reagent bottle content monitoring
CONDUCTIVITYPros: No moving parts, low costCons: Invasive, probe erosion, liquid needs to be conductiveTypical Applications: Boiler water, reagent monitoring
CAPACITANCE
Website: www.GemsSensors.com Call : 1-800-378-1600
Pros: No moving parts, can be non-invasive, accurateCons: Continuous calibration, needs resistive liquidsTypical Applications: Reagent, waste, and wash container levels
ULTRASONICPros: No moving parts, small, accurateCons: Expensive, invasiveTypical Applications: Large process tanks pharmaceutical
PIEZO-RESONANT
Website: www.GemsSensors.com Call : 1-800-378-1600
Pros: Non-invasive/non-contact, accurate, repeatable, and economicalCons: Powered, works only with plastic containers, wall thickness, temperature limitationsTypical Applications: Reagents, waste, diluents, wash, saline, pure water
ExOsense Piezo-Resonant Sensor
ELECTRO-OPTICAL
Website: www.GemsSensors.com Call : 1-800-378-1600
Pros: Compact, no moving parts, high temperature capabilityCons: Invasive, powered, and can be affected by dry or coating mediaTypical Applications: Reagents, waste, dialysate, detergent/wash, and coolant
ELECTRO-OPTIC OPERATING PRINCIPLE
Website: www.GemsSensors.com Call : 1-800-378-1600
•Contains an infrared LED and a light receiver•Light from the LED is directed into a prism which forms the tip of the sensor
•With no liquid, light from the LED is reflected within the prism to the receiver•When liquid immerses the prism, the light is refracted out into the liquid, leaving little or no light to reach the receiver•Sensing this change, the receiver actuates electronic switching within the unit to operate an external alarm or control circuit
FOR INQUIRIES
Website: www.GemsSensors.comPhone: 1-860-747-3000 | Fax: 860-747-4244Email: [email protected]: Gems Sensors & Control, One Cowles Road, Plainville, CT 06062-1198