gearless synchronous traction machines for mrl application
TRANSCRIPT
www.wittur.com
DRIVE SYSTEMS FOR ROPE AND BELT ELEVATORS
Gearless synchronous traction machinesfor MRL application WSG-T/S
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 1 17/09/15 08:47
45
2 WITTUR GROUP DRIVES
years of experience and value creation
+
We are your global solution
provider in the elevator world. Our experience reaches back 45
years in which we have developed
ourselves into a valuable supplier
for our numerous customers
in more than 60 countries
around the world.
The key to our success is based on the ideas, commitment and expertise of our more
than 3500 employees worldwide, who contribute to continuous improvement on all levels. Our
management as well as our staff are truly global and we encourage the interplay of different cultures
and nationalities in our project teams and offer international career paths. In each of our 10 manufacturing
sites we have committed ourselves to the same standards of excellence, assuring that our products are
of highest quality, produced efficiently by applying environmentally friendly manufacturing processes.
WELCOMETO WITTUR! YOUR GLOBAL PARTNER FOR COMPONENTS, MODULES AND SYSTEMS IN THE ELEVATOR INDUSTRY
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 2 18/09/15 07:45
3.500
10
60
DRIVES WITTUR GROUP 3
employees
manufacturing sites
countries
Wittur is Safety in Motion! We are a driving force for safety in the elevator industry and are always looking for possibilities
to improve our performance. The high level of safety we supply is not only reflected in our products and solutions but is also visible
at each of our manufacturing sites. It is our responsibility to assure that our employees return home safely every day. This holistic
safety standard is managed by the worldwide Wittur Production System: a structured process incorporating Concern Rooms to
handle feedbacks, Safety Corners to focus our employees on safety and Functional Excellence Management (FEM) Boards to publish
production trends and engage all members of the Wittur team in the accomplishment of quality, production and safety targets.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 3 18/09/15 07:45
4 WITTUR GROUP DRIVES
Drives WSG-T/SGEARLESS SYNCHRONOUS TRACTION MACHINES
Product range Page 05
Table for selection of standard motors Page 06
General features Page 08
Gearless synchronous traction machines WSG-TR Page 10
Gearless synchronous traction machines WSG-T0 Page 12
Gearless synchronous traction machines WSG-S1.3 Page 14
Gearless synchronous traction machines WSG-S1.5 Page 16
Gearless synchronous traction machines WSG-S2.2 Page 18
Gearless synchronous traction machines WSG-S2.3 Page 20
Gearless synchronous traction machines WSG-S2.4 Page 22
Gearless synchronous traction machines WSG-S3.5 Page 24
Gearless synchronous traction machines WSG-S3.6 Page 26
CONTENTS
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 4 17/09/15 08:47
MOTORfor rated
loads up to[kg]
ratedspeed[m/s]
tractionsheaves Ø
[mm]
perm.shaft load
[kN]
WSG-TR 1200 0,5 ... 1,6 100, 120 24
WSG-T0 675 0,5 ... 1,0 160 20
WSG-S1.3 1000 0,5 ... 1,75 160, 210, 240, 320 16 ... 20
WSG-S1.5 1400 0,5 ... 2,0 160, 210, 240 24 ... 26
WSG-S2.2 1350 0,5 ... 1,75 240, 270, 320 27 ... 30
WSG-S2.3 1275 0,5 ... 2,0 320, 400 33
WSG-S2.4 1600 0,5 ... 2,0 320, 400 45
WSG-S3.5 2050 0,63 ... 3,5 320, 400, 480, 520 55
WSG-S3.6 2750 0,63 ... 3,5 320, 400, 480, 520 63
DRIVES WITTUR GROUP 5
PRODUCT RANGE
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 5 17/09/15 08:48
Travel height [m]Duty cycleCompensationRated speed [m/s]
Q = 375 kg
P = 580 kg
Q = 450 kg
P = 700 kg
Q = 630 kg
P = 910 kg
Q =800 kg
P =990 kg
Q =1000 kg
P =1150 kg
Q =1275 kg
P =1440 kg
Q =1600 kg
P =1590 kg
Q =2000 kg
P =1675 kg
20S3-30%
NO
100
120
160
100
120
160
100
120
160
210
240
100
120
160
210
240
270
320
100
120
160
210
240
270
320
400
160
240
320
400
320
400
480
520
320
400
480
520
0,63TS Ø
Q = Max rated load P = Max car weight TS = Traction sheave diameter Q = Max rated load P = Max car weight TS = Traction sheave diameter
1 1,6
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.3
WSG-T0.3
WSG-S1.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.3
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.31)
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
12-13
10-11
10-11
10-11
12-13
10-11
12-13
14-15
14-15
10-11
10-11
14-15
16-17
16-17
18-19
18-19
10-11
10-11
14-15
16-17
16-17
18-19
18-19
20-21
16-17
18-19
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.3
WSG-T0.3
WSG-S1.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.3
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.31)
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
12-13
10-11
10-11
12-13
10-11
10-11
12-13
14-15
14-15
10-11
10-11
14-15
16-17
16-17
18-19
18-19
10-11
10-11
14-15
16-17
16-17
18-19
18-19
20-21
16-17
18-19
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
10-11
10-11
10-11
10-11
14-15
10-11
10-11
16-17
16-17
18-19
18-19
10-11
10-11
16-17
18-19
18-19
20-21
16-17
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
Shaft efficiency : 0,84 for v ≤ 2m/s (slider guide shoes); 0,90 for v ≥ 2,5m/s (roller guide)Motor installed above; 240s/h; balancing 50%; acceleration 0,5m/s2; single wrap (wrap angle 180°); central guidanceFor rope information (number and dimension) consult usThis table is to be used only for the very first extimation; for right calculation consult usDedicated motors for specific application are available on request1) only under shaft load special conditions
Roping 2:1
Table for selection of standard motors
Travel height [m]Duty cycleCompensationRated speed [m/s]
Q = 375 kg
P = 580 kg
Q = 450 kg
P = 700 kg
Q = 630 kg
P = 910 kg
Q =800 kg
P =990 kg
Q =1000 kg
P =1150 kg
Q =1275 kg
P =1440 kg
Q =1600 kg
P =1590 kg
Q =2000 kg
P =1675 kg
30S3-40%
NO
50S3-60%
YES
100
120
160
100
120
160
100
120
160
210
240
100
120
160
210
240
270
320
100
120
160
210
240
270
320
400
160
240
320
400
320
400
480
520
320
400
480
520
1,75 2TS Ø
2,5 32,5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
18-19
18-19
20-21
20-21
20-21
22-23
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S2.3
WSG-S2.4
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
20-21
22-23
22-23
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
24-25
24-25
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
24-25
24-25
24-25
26-27
26-27
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
26-27
26-27
26-27
26-27
Shaft efficiency : 0,84 for v ≤ 2m/s (slider guide shoes); 0,90 for v ≥ 2,5m/s (roller guide)Motor installed above; 240s/h; balancing 50%; acceleration 0,5m/s2; single wrap (wrap angle 180°); central guidanceFor rope information (number and dimension) consult usThis table is to be used only for the very first extimation; for right calculation consult usDedicated motors for specific application are available on request1) only under shaft load special conditions
Roping 2:1
Table for selection of standard motors
6 WITTUR GROUP DRIVES
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 6 17/09/15 08:48
Travel height [m]Duty cycleCompensationRated speed [m/s]
Q = 375 kg
P = 580 kg
Q = 450 kg
P = 700 kg
Q = 630 kg
P = 910 kg
Q =800 kg
P =990 kg
Q =1000 kg
P =1150 kg
Q =1275 kg
P =1440 kg
Q =1600 kg
P =1590 kg
Q =2000 kg
P =1675 kg
20S3-30%
NO
100
120
160
100
120
160
100
120
160
210
240
100
120
160
210
240
270
320
100
120
160
210
240
270
320
400
160
240
320
400
320
400
480
520
320
400
480
520
0,63TS Ø
Q = Max rated load P = Max car weight TS = Traction sheave diameter Q = Max rated load P = Max car weight TS = Traction sheave diameter
1 1,6
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.3
WSG-T0.3
WSG-S1.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.3
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.31)
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
12-13
10-11
10-11
10-11
12-13
10-11
12-13
14-15
14-15
10-11
10-11
14-15
16-17
16-17
18-19
18-19
10-11
10-11
14-15
16-17
16-17
18-19
18-19
20-21
16-17
18-19
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.2
WSG-T0.2
WSG-TR.2
WSG-TR.3
WSG-T0.3
WSG-S1.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.3
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.31)
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
12-13
10-11
10-11
12-13
10-11
10-11
12-13
14-15
14-15
10-11
10-11
14-15
16-17
16-17
18-19
18-19
10-11
10-11
14-15
16-17
16-17
18-19
18-19
20-21
16-17
18-19
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.2
WSG-TR.3
WSG-S1.3
WSG-TR.3
WSG-TR.5
WSG-S1.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-TR.5
WSG-TR.5
WSG-S1.5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S1.5
WSG-S2.3
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
10-11
10-11
10-11
10-11
10-11
10-11
14-15
10-11
10-11
16-17
16-17
18-19
18-19
10-11
10-11
16-17
18-19
18-19
20-21
16-17
20-21
20-21
20-21
22-23
24-25
24-25
24-25
24-25
26-27
26-27
Shaft efficiency : 0,84 for v ≤ 2m/s (slider guide shoes); 0,90 for v ≥ 2,5m/s (roller guide)Motor installed above; 240s/h; balancing 50%; acceleration 0,5m/s2; single wrap (wrap angle 180°); central guidanceFor rope information (number and dimension) consult usThis table is to be used only for the very first extimation; for right calculation consult usDedicated motors for specific application are available on request1) only under shaft load special conditions
Roping 2:1
Table for selection of standard motors
Travel height [m]Duty cycleCompensationRated speed [m/s]
Q = 375 kg
P = 580 kg
Q = 450 kg
P = 700 kg
Q = 630 kg
P = 910 kg
Q =800 kg
P =990 kg
Q =1000 kg
P =1150 kg
Q =1275 kg
P =1440 kg
Q =1600 kg
P =1590 kg
Q =2000 kg
P =1675 kg
30S3-40%
NO
50S3-60%
YES
100
120
160
100
120
160
100
120
160
210
240
100
120
160
210
240
270
320
100
120
160
210
240
270
320
400
160
240
320
400
320
400
480
520
320
400
480
520
1,75 2TS Ø
2,5 32,5
WSG-S2.2
WSG-S2.2
WSG-S2.3
WSG-S2.3
WSG-S2.4
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
18-19
18-19
20-21
20-21
20-21
22-23
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S2.3
WSG-S2.4
WSG-S2.4
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
20-21
22-23
22-23
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
24-25
24-25
24-25
24-25
26-27
24-25
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
24-25
24-25
24-25
26-27
26-27
26-27
26-27
26-27
WSG-S3.5
WSG-S3.5
WSG-S3.5
WSG-S3.6
WSG-S3.6
WSG-S3.6
WSG-S3.6
pag.
pag.
pag.
pag.
pag.
pag.
pag.
24-25
24-25
24-25
26-27
26-27
26-27
26-27
Shaft efficiency : 0,84 for v ≤ 2m/s (slider guide shoes); 0,90 for v ≥ 2,5m/s (roller guide)Motor installed above; 240s/h; balancing 50%; acceleration 0,5m/s2; single wrap (wrap angle 180°); central guidanceFor rope information (number and dimension) consult usThis table is to be used only for the very first extimation; for right calculation consult usDedicated motors for specific application are available on request1) only under shaft load special conditions
Roping 2:1
Table for selection of standard motors
DRIVES WITTUR GROUP 7
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 7 17/09/15 08:48
8 WITTUR GROUP DRIVES
General features
• Synchronous internal rotor elevator drive with brake system, traction sheave, measuring system (encoder)• Conformity certified and type test performed in accordance with Lift Directive 95/16/EC and 2014/33/EU• High efficiency value due to high perfomances PM • Thermal class F (155°C) with thermistors for temperature monitoring• Generous electromagnetic dimensioning for high usage & overload conditions• Special electromagnetic design to minimize noise and vibrations• Solid construction due to cast iron case • Compact and space saving design • Integrated fails safe brake , type-tested to EN 81-1 and EN 81-20, can be used for UCM solution, dual circuit, separately controllable• Groove profiles according to elevator system• Inverter compatible measuring devices (e.g. ECN 413; ERN 487)• Different electrical connection available for motor/brake/encoder to fit every application (terminal box, cables, connectors)• Variable options regarding voltage, speed, torque, measuring system, braking torque and traction sheaves paramenters• Manual release for brake available as option• Relevant acceptance documentation and detailed operating manuals
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 8 17/09/15 08:48
E ( 1 : 2 )
E
B
220
42.5
295
130
180
1914x M16x2-35/ 40 tief95.5 95.5
A 42.5
220
237
226
212.95C
42.5
60.5
140
50
100
50
2x M12
255.45
143ca.
36ca.
172ca.
266.
3
35
Z
220
140
280
DT
Ø Ø Ø
Ø
Ø
ØMotor WSG- TR.2 TR.3 TR.5
Ø DT 120 120 120
A 235 260 325
B 347,5 372,5 437,5
C 560,5 585,5 650,5
ZØ 123 123 123
weight mG [kg] 104 110 122
inertia
shaft loads up to
JG [kgm2] 0,056 0,061 0,071
FS [kN] 24
Reference values. Achievable nominal loaddepends on specific elevator system data.
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-TR.2
95
210
2 x 145
WSG-TR.3
115
255
2 x 145
WSG-TR.5
165
365
2 x 225
v[m/s]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
191241382611
1,92,43,86,1
6,08,5
10,014,0
159201318509
1,62,03,25,1
6,06,08,5
12,5
191241382611
2,32,94,67,4
7,09,5
11,516,5
159201318509
1,92,43,86,1
7,07,09,5
14,0
191241382611
3,34,26,6
10,6
9,513,015,524,5
159201318509
2,73,55,58,8
9,59,5
13,021,0
table applies for 2:1
100
up to 630
120
up to 500
100
up to 800
120
up to 630
100
up to 1200
120
up to 1000
WSG-TRGEARLESS SYNCHRONOUS TRACTION MACHINES
0,50,631,01,6
DIMENSION DRAWING
10 WITTUR GROUP DRIVES
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for ropes with plastic sheathing or polyropes/belts
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 10 17/09/15 08:48
E ( 1 : 2 )
E
B
220
42.5
295
130
180
1914x M16x2-35/ 40 tief95.5 95.5
A 42.5
220
237
226
212.95C
42.5
60.5
140
50
100
50
2x M12
255.45
143ca.
36ca.
172ca.
266.
3
35
Z
220
140
280
DT
Ø Ø Ø
ØØ
ØMotor WSG- TR.2 TR.3 TR.5
Ø DT 120 120 120
A 235 260 325
B 347,5 372,5 437,5
C 560,5 585,5 650,5
ZØ 123 123 123
weight mG [kg] 104 110 122
inertia
shaft loads up to
JG [kgm2] 0,056 0,061 0,071
FS [kN] 24
Reference values. Achievable nominal loaddepends on specific elevator system data.
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-TR.2
95
210
2 x 145
WSG-TR.3
115
255
2 x 145
WSG-TR.5
165
365
2 x 225
v[m/s]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
nN[rpm]
PN[kW]
IN[A]
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
191241382611
1,92,43,86,1
6,08,5
10,014,0
159201318509
1,62,03,25,1
6,06,08,5
12,5
191241382611
2,32,94,67,4
7,09,5
11,516,5
159201318509
1,92,43,86,1
7,07,09,5
14,0
191241382611
3,34,26,6
10,6
9,513,015,524,5
159201318509
2,73,55,58,8
9,59,5
13,021,0
table applies for 2:1
100
up to 630
120
up to 500
100
up to 800
120
up to 630
100
up to 1200
120
up to 1000
WSG-TRGEARLESS SYNCHRONOUS TRACTION MACHINES
0,50,631,01,6
DIMENSION DRAWING
DRIVES WITTUR GROUP 11
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 11 17/09/15 08:48
12 WITTUR GROUP DRIVES
Motor WSG- T0.2 T0.3
Ø DT 160 160
L 566,5 602
E 317,5 353
110 122weight mG [kg]
0,09 0,1inertia JG [kgm2]
20shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
Motor
torque, S3-30%, 180 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
v[m/s]
Motor currentsapplicable to500...620 V / 260...350 VDC link voltage
nN[rpm]
119
150
239
PN[kW]
1,7
2,1
3,4
IN[A]
7 / 11
8,7 / 13,5
10,3 / 17,5
nN[rpm]
119
150
239
PN[kW]
2,2
2,7
4,4
IN[A]
8,5 / 13,5
11 / 17
12,5 / 21
table applies for 2:1
WSG-T0.2
135
290
2 x 225
160
up to 500
WSG-T0.3
175
380
2 x 280
160
up to 675
WSG-T0GEARLESS SYNCHRONOUS TRACTION MACHINES
0,5
0,63
1,0
DT =
Ø 16
0
100
E
335
245200
16M
35 40
73 73
3232179
60
L
FS
DT =
Ø 16
0
100
E
335
245200
16M
35 40
73 73
3232179
60
L
FS
DIMENSION DRAWING
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for home-lift application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 12 17/09/15 08:48
DRIVES WITTUR GROUP 13
Motor WSG- T0.2 T0.3
Ø DT 160 160
L 566,5 602
E 317,5 353
110 122weight mG [kg]
0,09 0,1inertia JG [kgm2]
20shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
Motor
torque, S3-30%, 180 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
v[m/s]
Motor currentsapplicable to500...620 V / 260...350 VDC link voltage
nN[rpm]
119
150
239
PN[kW]
1,7
2,1
3,4
IN[A]
7 / 11
8,7 / 13,5
10,3 / 17,5
nN[rpm]
119
150
239
PN[kW]
2,2
2,7
4,4
IN[A]
8,5 / 13,5
11 / 17
12,5 / 21
table applies for 2:1
WSG-T0.2
135
290
2 x 225
160
up to 500
WSG-T0.3
175
380
2 x 280
160
up to 675
WSG-T0GEARLESS SYNCHRONOUS TRACTION MACHINES
0,5
0,63
1,0
DT =
Ø 16
0
100
E
335
245200
16M
35 40
73 73
3232179
60
L
FS
DT =
Ø 16
0
100
E
335
245200
16M
35 40
73 73
3232179
60
L
FS
DIMENSION DRAWING
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 13 17/09/15 08:48
14 WITTUR GROUP DRIVES
Motor WSG- S1.3Ø DT 160
130
548
118,5
145,5
0,19
16
210
120
525
99
141
0,22
20
240
92
505
85
141
0,24
20
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
WSG-S1.3GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
BT
L
C
320
105
510
91,5
150
0,46
20
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S1.3
230
575
2 x 280
table applies for 2:1
160
up to 1000
210
up to 750
240
up to 630
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
119150239
PN[kW]
2,93,65,8
IN[A]
9,410,414,5
nN[rpm]
91115182
PN[kW]
2,22,84,4
IN[A]
7,69,4
11,4
nN[rpm]
80100159255
PN[kW]
1,92,43,86,1
IN[A]
6,87,6
10,414,5
v[m/s]
0,50,631,01,6
1,75
320
up to 480
nN[rpm]
6075
119191209
PN[kW]
1,41,82,94,65,0
IN[A]
5,66,89,4
11,412,5
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 14 17/09/15 08:48
DRIVES WITTUR GROUP 15
Motor WSG- S1.3Ø DT 160
130
548
118,5
145,5
0,19
16
210
120
525
99
141
0,22
20
240
92
505
85
141
0,24
20
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
WSG-S1.3GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
BT
L
C
320
105
510
91,5
150
0,46
20
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S1.3
230
575
2 x 280
table applies for 2:1
160
up to 1000
210
up to 750
240
up to 630
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
119150239
PN[kW]
2,93,65,8
IN[A]
9,410,414,5
nN[rpm]
91115182
PN[kW]
2,22,84,4
IN[A]
7,69,4
11,4
nN[rpm]
80100159255
PN[kW]
1,92,43,86,1
IN[A]
6,87,6
10,414,5
v[m/s]
0,50,631,01,6
1,75
320
up to 480
nN[rpm]
6075
119191209
PN[kW]
1,41,82,94,65,0
IN[A]
5,66,89,4
11,412,5
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 15 17/09/15 08:48
16 WITTUR GROUP DRIVES
Motor WSG- S1.5Ø DT 160
130
659
126,5
195
0,26
24
210
120
633
104,5
193
0,3
26
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
WSG-S1.5GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
BT
L
C
240
92
614
90,5
193
0,33
26
160
Ø 290
277.5
40
204x M
200
253
387
190 C
L
BT
ØD
T
FS
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S1.5
330
750
2 x 450
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
v[m/s]
0,50,631,01,62,0
table applies for 2:1
160
up to 1400
210
up to 1200
nN[rpm]
119150239382
PN[kW]
4,15,28,3
13,2
IN[A]
10,513,019,529,0
nN[rpm]
91115182291364
PN[kW]
3,14,06,3
10,012,6
IN[A]
9,510,514,523,529,0
nN[rpm]
80100159255318
PN[kW]
2,83,55,58,8
11,0
IN[A]
9,510,513,019,523,5
240
up to 900
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 16 17/09/15 08:48
DRIVES WITTUR GROUP 17
Motor WSG- S1.5Ø DT 160
130
659
126,5
195
0,26
24
210
120
633
104,5
193
0,3
26
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
WSG-S1.5GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
BT
L
C
240
92
614
90,5
193
0,33
26
160
Ø 290
277.5
40204x M
200
253
387
190 C
L
BT
ØD
T
FS
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S1.5
330
750
2 x 450
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
v[m/s]
0,50,631,01,62,0
table applies for 2:1
160
up to 1400
210
up to 1200
nN[rpm]
119150239382
PN[kW]
4,15,28,3
13,2
IN[A]
10,513,019,529,0
nN[rpm]
91115182291364
PN[kW]
3,14,06,3
10,012,6
IN[A]
9,510,514,523,529,0
nN[rpm]
80100159255318
PN[kW]
2,83,55,58,8
11,0
IN[A]
9,510,513,019,523,5
240
up to 900
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 17 17/09/15 08:48
Motor WSG- S2.2Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
240
95
585
100,5
275
0,55
30
120
600
113
278
0,59
27
270
95
585
100,5
278
0,59
30
120
600
113
281
0,66
27
320
105
585
105,5
284
0,8
30
120
600
113
290
0,83
27
Reference values.Achievable nominal load depends on specific elevator system data.
WSG-S2.2GEARLESS SYNCHRONOUS TRACTION MACHINES
BT
L
C
235
300
DIMENSION DRAWING
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.2
500
1200
2 x 600
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
v[m/s]
0,50,631,01,6
1,75
table applies for 2:1
240
up to 1350
270
up to 1200
320
up to 1000
nN[rpm]
80100159
PN[kW]
4,25,28,3
IN[A]
13,015,519,5
nN[rpm]
7189
142226
PN[kW]
3,74,77,4
11,8
IN[A]
11,513,016,526,0
nN[rpm]
6075
119191209
PN[kW]
3,13,96,2
10,010,9
IN[A]
10,011,515,522,526,0
18 WITTUR GROUP DRIVES
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 18 17/09/15 08:48
Motor WSG- S2.2Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
240
95
585
100,5
275
0,55
30
120
600
113
278
0,59
27
270
95
585
100,5
278
0,59
30
120
600
113
281
0,66
27
320
105
585
105,5
284
0,8
30
120
600
113
290
0,83
27
Reference values.Achievable nominal load depends on specific elevator system data.
WSG-S2.2GEARLESS SYNCHRONOUS TRACTION MACHINES
BT
L
C
235
300
DIMENSION DRAWING
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.2
500
1200
2 x 600
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
v[m/s]
0,50,631,01,6
1,75
table applies for 2:1
240
up to 1350
270
up to 1200
320
up to 1000
nN[rpm]
80100159
PN[kW]
4,25,28,3
IN[A]
13,015,519,5
nN[rpm]
7189
142226
PN[kW]
3,74,77,4
11,8
IN[A]
11,513,016,526,0
nN[rpm]
6075
119191209
PN[kW]
3,13,96,2
10,010,9
IN[A]
10,011,515,522,526,0
DRIVES WITTUR GROUP 19
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 19 17/09/15 08:48
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.3
700
1470
2 x 900
table applies for 2:1
320
up to 1275
WSG-S2.3GEARLESS SYNCHRONOUS TRACTION MACHINES
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
6075
119191209
PN[kW]
4,45,58,7
14,015,3
IN[A]
12,515,020,530,030,0
nN[rpm]
486095
153167191
PN[kW]
3,54,47,0
11,212,214,0
IN[A]
12,512,517,525,525,530,0
v[m/s]
0,50,631,01,6
1,752,0
DIMENSION DRAWING
400
up to 1050
*) 6 mounting holes ø 28 #) and 4 threaded holes M24
Motor WSG- S2.3
Ø DT 320 400
345 360
1,0 1,6
33
weight mG [kg]
inertia JG [kgm2]
shaft loads up to FS [kN]Reference values. Achievable nominal loaddepends on specific elevator system data.
20 WITTUR GROUP DRIVES
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 20 17/09/15 08:48
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.3
700
1470
2 x 900
table applies for 2:1
320
up to 1275
WSG-S2.3GEARLESS SYNCHRONOUS TRACTION MACHINES
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
6075
119191209
PN[kW]
4,45,58,7
14,015,3
IN[A]
12,515,020,530,030,0
nN[rpm]
486095
153167191
PN[kW]
3,54,47,0
11,212,214,0
IN[A]
12,512,517,525,525,530,0
v[m/s]
0,50,631,01,6
1,752,0
DIMENSION DRAWING
400
up to 1050
*) 6 mounting holes ø 28 #) and 4 threaded holes M24
Motor WSG- S2.3
Ø DT 320 400
345 360
1,0 1,6
33
weight mG [kg]
inertia JG [kgm2]
shaft loads up to FS [kN]Reference values. Achievable nominal loaddepends on specific elevator system data.
DRIVES WITTUR GROUP 21
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 21 17/09/15 08:48
22 WITTUR GROUP DRIVES
WSG-S2.4GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
388
30
404
200
450
420
350306
495
L
DT
BT24#)
28*)
55
340104 104 66
Fs
C
*) 6 mounting holes ø 28#) and 4 threaded holes M 24
Motor WSG- S2.4Ø DT 320
45
120
869
107
447
1,06
105
854
100
445
1,03
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
BT
L
C
400
150
902
122
474
2,06
105
857
100
460
1,62
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.4
900
1700
2 x 1200
table applies for 2:1
320
up to 1600
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
6075
119191209
PN[kW]
5,77,1
11,218,019,7
IN[A]
18,021,029,546,046,0
nN[rpm]
486095
153167191
PN[kW]
4,55,79,0
14,415,718,0
IN[A]
18,018,024,538,038,046,0
v[m/s]
0,50,631,01,6
1,752,0
400
up to 1275
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 22 17/09/15 08:48
DRIVES WITTUR GROUP 23
WSG-S2.4GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
388
30
404
200
450
420
350306
495
L
DT
BT24#)
28*)
55
340104 104 66
Fs
C
*) 6 mounting holes ø 28#) and 4 threaded holes M 24
Motor WSG- S2.4Ø DT 320
45
120
869
107
447
1,06
105
854
100
445
1,03
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
Reference values. Achievable nominal loaddepends on specific elevator system data.
BT
L
C
400
150
902
122
474
2,06
105
857
100
460
1,62
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S2.4
900
1700
2 x 1200
table applies for 2:1
320
up to 1600
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
6075
119191209
PN[kW]
5,77,1
11,218,019,7
IN[A]
18,021,029,546,046,0
nN[rpm]
486095
153167191
PN[kW]
4,55,79,0
14,415,718,0
IN[A]
18,018,024,538,038,046,0
v[m/s]
0,50,631,01,6
1,752,0
400
up to 1275
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 23 17/09/15 08:48
WSG-S3.5GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
Motor WSG- S3.5Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
320 400 480 520
55
669
1,9
180
970
176
195
985
183,5
686
2,8
720
4,8
742
6,6
Reference values.Achievable nominal load depends on specific elevator system data.
BT
L
C
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S3.5
1200
2400
2 x 1800
table applies for 2:1
320
up to 2050
400
up to 1600
480
up to 1350
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
75119191239298
--
PN[kW]
9,415,024,030,037,4
--
IN[A]
25,537,059,570,586,0
--
nN[rpm]
6095
153191239286
-
PN[kW]
7,511,919,224,030,035,9
-
IN[A]
21,531,045,559,570,586,0
-
nN[rpm]
5080
127160200239279
PN[kW]
6,310,116,020,125,130,035,1
IN[A]
21,531,045,559,570,570,586,0
v[m/s]
0,631,01,62,02,53,03,5
520
up to 1250
nN[rpm]
4673
118147184220257
PN[kW]
5,89,2
14,818,523,127,632,3
IN[A]
21,525,537,045,559,570,586,0
*) 4 mounting holes Ø 35#) and 6 threaded holes M 30
DT
BT
C
L988max.
475385
105 105 87.5
60
30M #)35 *)360440
250
40
575
240240446
220
FS
24 WITTUR GROUP DRIVES
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
Especially developed for MRL application
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 24 17/09/15 08:48
WSG-S3.5GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
Motor WSG- S3.5Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
320 400 480 520
55
669
1,9
180
970
176
195
985
183,5
686
2,8
720
4,8
742
6,6
Reference values.Achievable nominal load depends on specific elevator system data.
BT
L
C
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S3.5
1200
2400
2 x 1800
table applies for 2:1
320
up to 2050
400
up to 1600
480
up to 1350
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
75119191239298
--
PN[kW]
9,415,024,030,037,4
--
IN[A]
25,537,059,570,586,0
--
nN[rpm]
6095
153191239286
-
PN[kW]
7,511,919,224,030,035,9
-
IN[A]
21,531,045,559,570,586,0
-
nN[rpm]
5080
127160200239279
PN[kW]
6,310,116,020,125,130,035,1
IN[A]
21,531,045,559,570,570,586,0
v[m/s]
0,631,01,62,02,53,03,5
520
up to 1250
nN[rpm]
4673
118147184220257
PN[kW]
5,89,2
14,818,523,127,632,3
IN[A]
21,525,537,045,559,570,586,0
*) 4 mounting holes Ø 35#) and 6 threaded holes M 30
DT
BT
C
L988max.
475385
105 105 87.5
60
30M #)35 *)360440
250
40
575
240240446
220
FS
DRIVES WITTUR GROUP 25
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 25 17/09/15 08:48
26 WITTUR GROUP DRIVES
Especially developed for MRL application
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
WSG-S3.6GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
Motor WSG- S3.6Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
320 400 480 520
63
669
2,0
180
970
176
195
985
183,5
716
2,9
750
4,9
772
6,7
Reference values.Achievable nominal load depends on specific elevator system data.
BT
L
C
*) 4 mounting holes Ø 35#) and 6 threaded holes M 30
DT
BT
C
L988max.
475385
105 105 87.5
60
30M #)35 *)360440
250
40
575
240240446
220
FS
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S3.6
1650
3200
2 x 2065
table applies for 2:1
320
up to 2750
400
up to 2500
480
up to 2000
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
75119191239
---
PN[kW]
13,020,633,041,3
---
IN[A]
39,055,085,5
104,5---
nN[rpm]
6095
153191239
--
PN[kW]
10,416,426,433,041,3
--
IN[A]
32,547,072,085,5
104,5--
nN[rpm]
5080
127160200239
-
PN[kW]
8,613,821,927,634,641,3
-
IN[A]
32,547,072,085,5
104,5104,5
-
v[m/s]
0,631,01,62,02,53,03,5
520
up to 1800
nN[rpm]
4673
118147184220
-
PN[kW]
7,912,620,425,431,838,0
-
IN[A]
32,539,055,072,085,5
104,5-
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 26 17/09/15 08:48
DRIVES WITTUR GROUP 27
All technical data, outputs, dimensions and weights stated in this catalogue can be changed without notice. The illustrations are not binding.
WSG-S3.6GEARLESS SYNCHRONOUS TRACTION MACHINES
DIMENSION DRAWING
Motor WSG- S3.6Ø DT
weight mG [kg]
JGinertia [kgm2]
shaft loads up to FS [kN]
320 400 480 520
63
669
2,0
180
970
176
195
985
183,5
716
2,9
750
4,9
772
6,7
Reference values.Achievable nominal load depends on specific elevator system data.
BT
L
C
*) 4 mounting holes Ø 35#) and 6 threaded holes M 30
DT
BT
C
L988max.
475385
105 105 87.5
60
30M #)35 *)360440
250
40
575
240240446
220
FS
Motor
torque, S3-40%, 240 S/h
max. torque
brake torque
traction sheave
for rated loads
suspension
MN [Nm]
Mmax [Nm]
Mbr [Nm]
Ø DT [mm]
Q [kg]
WSG-S3.6
1650
3200
2 x 2065
table applies for 2:1
320
up to 2750
400
up to 2500
480
up to 2000
Motor currentsapplicable to500...620 V DC link voltage(Serie “ECO“)
nN[rpm]
75119191239
---
PN[kW]
13,020,633,041,3
---
IN[A]
39,055,085,5
104,5---
nN[rpm]
6095
153191239
--
PN[kW]
10,416,426,433,041,3
--
IN[A]
32,547,072,085,5
104,5--
nN[rpm]
5080
127160200239
-
PN[kW]
8,613,821,927,634,641,3
-
IN[A]
32,547,072,085,5
104,5104,5
-
v[m/s]
0,631,01,62,02,53,03,5
520
up to 1800
nN[rpm]
4673
118147184220
-
PN[kW]
7,912,620,425,431,838,0
-
IN[A]
32,539,055,072,085,5
104,5-
DRIVES WSG T-S brochure gb_19may2015-fotoOK.indd 27 17/09/15 08:48