ge advanced materials silicones rtv silicone rubber

RTV SiliconeRubber Product selector guide

GE Advanced MaterialsSilicones

RTV Silicone is a liquid silicone rubber developed forpotting, adhesion, sealing, and coating for use in electronic, electrical, automotive, and general industrialapplications. GE Advanced Materials Silicones applies itsmany years of experience and technical excellence inthe development of its RTV products, and offers its customers a level of performance critical to achieving long term integrity and reliability in a wide range of applications.

RTV

Room

Temperature

VulcanizingCONTENTSRTV Silicone Overview P. 3Industries / Applications P. 4-5Product Index P. 6-7Property Selection Guide P. 8Product List Adhesion and Sealing RTV’s 1 Part Condensation Cure P.9-10 1 Part Addition Cure P. 11 2 Part Addition Cure P. 12 2 Part Condensation Cure P. 12 Coatings RTV’s 1& 2 Part Condensation Cure P. 13 1 Part Addition Cure P. 14 Potting RTV’s 1 Part /2 Part Potting Gels/ P. 15 1 Part Potting Rubber P. 15-16 2 part Potting Rubber P. 17 Silicone Junction Coatings P. 18 Heat Conductive RTV’s P. 19 Heat Conductive Silicone Grease P. 20Low Volatility Grades P. 20UL Recognized Products P. 21Product Packaging and Color P. 22-24Technical Information Curing Properties P. 25-26 Adhesion P. 27 Chemical Resistance P. 28 Electrical Properties P. 28 Heat Resistance / Precaution for use P. 29 Dispensing Equipment P. 30GE Silicones / GE Bayer Silicones Information P. 31

RTV Overview

Sil

ico

ne

Addition (heat) Cure

Condensation Cure1Part

2 Part

Silicone Oil

MillableSilicone Rubber

SiliconeVarnish UV Cure

RTV

Addition (heat) Cure

Condensation Cure

RTV Silicone ProfileRTV silicones consist of Condensation Cure, Addition (heat) Cure, and UV Cure grades. Selection of the appropriate type of RTV depends upon the required manufacturing process, handling requirements, curing conditions, equipment, and material properties.

Condensation Cure RTV: Cures to form an elastic silicone rubber when exposed to moisture in the envrionment at room temperatures. One part RTVs are categorized into Alkoxy Oxime, or Acetoxy, based upon the by-products that occur during cure.

Addition Cure RTV: Cures to form an elastic silicone rubber when exposed to either heat or room temperature.

UV Cure RTV: Cures to form and elastic silicone rubber when exposed to UV light.

RTV silicones exhibit high performance under many harsh operating environments. They also provide strong primerless adhesion to many substrates including metals, plastics, glass, and ceramics.

Benefits and Characteristics

Property Silicone RTV Epoxy Urethane

* As a base material, silicone demonstrates flame retardant properties comparable to UL94HB. Refer to page 22 for information on UL recognized products.

Temperature Range -50 ~ +200 -50 ~ +150 -30 ~ +120

Flame Retardancy* Excellent None None

UV Stability Excellent Poor Poor

Ozone Stability Excellent Poor Poor

Modulus Low High High

Heat Resistance Excellent Poor Poor

oC oC oC

3

GE Bayer Silicones

Industries / Applications

Electronics

GE Advanced Materials Silicones RTVs are used extensively in the Electronic and Electric industries to ensurelong term, reliable performance of critical components and electronic circuit assemblies. Silicone adhesives,sealants, conformal coatings, potting gels / rubber, encapsulants, and thermal management materials playa vital role in many of today’s demanding electronic applications.

Typical Applications:

- Power Module - PCB Fixing & Sealing - Photo Couplers - Converter - High Voltage Part Insulation - Solar Cell - Sensors - Hybrid IC - Membrane Switches - Micro-Electronic - LEDs

Home Appliances


- Flat Panel Display Sealing - Gas Stoves - CRT Wedges, Bases, Anode - Heaters, Ovens - Microwave Oven Doors, Box Sealing - Control Panel Insulation - Steam Iron Plate Seal - PCB Fixing & Sealing - Air Conditioner Units

RTVs are commonly used in a wide variety of consumer goods and home appliance products. In addition tostrong adhesion performance to many substrates, silicones provide heat resistance, flame retardancy, andmoisture / dirt protection that make silicone an ideal material for a variety of sealing, bonding, and insulationapplications.

4

Automotive


Aerospace


The Automotive Industry plays a critical role in integrating new electronic technologies. As more and morecomponents migrate to electronic solutions, RTVs play an increasingly vital role in delivering material solutions toprovide design flexibility, protection, and long-term component reliability under harsh operating conditions.

- ECU Potting, Sealing, Coating - Wire Connector Potting - Alternator Voltage Regulators - Actuators - HVAC Systems

- Air Flow Meters- Pressure Sensors- Temperature Sensors- Rotation Sensors- Ultrasonic Sensors

- Headlamp Seals- LED Lamp Potting- Airbag Coating- Engine FIPG Gaskets

Electronic component and frame assembly needs in the Aerospace Industry are served through RTV adhesives,potting, coating, encapsulation, and sealing materials that withstand stress and termperature extremes.

- Cockpit Instrument - Engine Electronics Potting - Ventilation Ducts - Electronic Power Equipment - Cargo Door Seal - General Maintenance - Circuit and Terminal Protection - Window Assembly Sealants - Wire Sealant - Weather Strip Adhesive - Engine Gasketin - Lighting Sealants

5

- Sensor Potting, Sealing

GE Bayer Silicones

Selection Guide

Product Index

Type Product Code Cure Type CharacteristicAdhesive

/ Seal Coating Potting ThermalMgmt.

GeneralPurpose

TSE392 Condensation Alkoxy Non-Flowable, Low Volatility P.9TSE3925 Condensation Alkoxy Non-Flowable, Low Volatility P.9TSE397 Condensation Alkoxy Flowable P.9 P.13TSE3971 Condensation Alkoxy Flowable P.9 P.13TSE3972 Condensation Alkoxy Flowable P.9 P.13TSE3975 Condensation Alkoxy Flowable, Low Volatility P.10 P.13TSE399 Condensation Alkoxy Flowable P.13 P.15TSE3991 Condensation Alkoxy Flowable P.13 P.15TSE3995 Condensation Alkoxy Flowable, Low Volatility P.13 P.15TSE3996 Condensation Alkoxy Flowable, Low Volatility P.13 P.15

TSE3212 Addition Heat Semi-Flowable P.14TSE322 Addition Heat Flowable P.11TSE322S Addition Heat Semi-Flowable, UL94HB P.11TSE3221S Addition Heat Flowable P.11

P.14TSE325 Addition Heat FlowableP.14 P.15TSE3250 Addition Heat Flowable

TSE3251 Addition Heat Semi-Flowable P.14TSE3251-C Addition Heat Semi-Flowable P.14TSE3251H Addition Heat Semi-Flowable P.15TSE3251H-C Addition Heat Semi-Flowable P.15

FlameRetardant

TSE3854D Condensation Alkoxy Non-Flowable, UL94 V-0 P.9TSE3941M Condensation Alkoxy Non-Flowable P.9

TSE3944 Condensation Alkoxy Semi-Flowable, UL94 V-0, Low Volatility P.9 P.13TSE3945 Condensation Alkoxy Non-Flowable, UL94 V-0, Low Volatility P.9TSE3946 Condensation Alkoxy Non-Flowable, UL94 V-1, Low Volatility P.9XE11-A5133S Condensation Alkoxy Flowable, UL94 V-1, Low Volatility P.13

HeatResistant

Condensation Acetoxy Non-Flowable P.10Condensation Acetoxy Flowable, Self-Leveling P.10

TSE3976-B Condensation Alkoxy Flowable, UL94HB, Low Volatility P.10 P.13

TSE326 Addition Heat Flowable P.11P.11

TSE3260 Addition Heat Flowable, UL94HB P.11TSE3261-G Addition Heat Flowable P.11

TR

AP

EN

O

TSE3051 Addition Heat Gel

RTV142RTV160RTV162RTV5242/5243/5249 IS802/803/806/808

RTV102/106/108/109

RTV112/118RTV1473RTV157RTV159FRV1106RTV6424

CondensationCondensationCondensationCondensationCondensationCondensation

CondensationCondensationCondensationCondensationCondensation

Addition

Flowable,UL94HBFlowable,UL94HBNon-Flowable, UL94HB

Non-Flowable

Non-Flowable, UL94HB Non-Flowable, UL94HB

FlowableNon-Flowable, Oil ResistanceNon-FlowableNon-FlowableNon-FlowableNon-Flowable

P.9

P.10P.10P.10P.10P.10P.10P.10P.10P.10P.11

Alkoxy

Alkoxy

Alkoxy

AlkoxyAcetoxy

Acetoxy

Acetoxy

Acetoxy

Acetoxy

Acetoxy

AcetoxyHeat

RTV106RTV116

TSE326MEX Addition Heat Flowable

P.15

P.11

P.19P.19

6

P.15

P.15

P.9

Application

TSE3941 Condensation Alkoxy Non-Flowable, UL94 V-1 P.9 P.19

P.14

P.13 P.19

Product Index

Type Product Code Cure Type CharacteristicApplication

Adhesive / Seal Coating Potting Thermal

Mgmt.

ThermallyConductive

TSE3941 Condensation Alkoxy Non-Flowable, UL94 V-1 P.9 P.18TSE3941M Condensation Alkoxy Flowable P.9 P.13 P.19

XE11-B5320 Condensation Alkoxy Non-Flowable, Low Volatility P.10 P.19TSE3280-G Addition Heat Flowable P.11 P.19TSE3281-G Addition Heat Flowable, High Thermal Conductivity P.11 P.19TSE3282-G Addition Heat Flowable, High Thermal Conductivity P.11 P.19YG6111 - - Silicone Grease, Low Volatility P.20YG6240 - - Silicone Grease, Low Volatility P.20YG6260 - - Silicone Grease, Low Volatility P.20YG6260V - - Silicone Grease, Low Volatility P.20TSK5303 - - Silicone Grease, Low Volatility P.20

JunctionCoating

TSJ3155 Addition Heat P.18TSJ3156 Addition Heat

Rubber, Semi-Flowable

P.18TSJ3185 Addition Heat P.18TSJ3186 Addition Heat P.19TSJ3187 Addition Heat P.18

Gel, Semi-Flowable

Gel, Semi-Flowable

GeneralPurpose

TSE3663 Condensation Flowable P.12 P.17

Junction Coatings

TR

AP

EN

OT

RA

P O

WT

TSE3946 Condensation P.9XE11-A5133S Condensation P.13

RoomTemperature

Alkoxy Non-Flowable, UL94 V-1, Low Volatility

Alkoxy Flowable, UL94 V-1, Low Volatility

P.19P.19

Rubber, Semi-Flowable

Gel, Semi-Flowable

RTV11RTV511RTV560RTV566RTV567RTV577RTV8111RTV8112RTV8262RTV60RTV88D1-SEA210RTV6428RTV615RTV655RTV6166RTV6196LVG342

Condensation

Condensation

Condensation

Condensation

Condensation

Condensation

CondensationCondensationCondensation

CondensationCondensation

Condensation

Addition

Addition

Addition

Addition

Addition

Addition

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

Heat / RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

Heat

HeatHeat / RoomTemperatureHeat / RoomTemperature

Heat

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Flowable

Semi-FlowableSemi-Flowable

Non-Flowable

Non-Flowable, UL94HB

Flowable, Low Volatility

Flowable

P.16P.17P.17

P.17P.17P.17P.17

P.16P.16

P.12

P.16P.16P.16

P.12

TSE3331 Addition Heat Flowable, UL94 V-0 P.14 P.17 P.19TSE3331K-EX Addition Heat Flowable, Non-Adhesive, UL94 V-0 P.17TSE3431-H Addition Heat Flowable, Non-Adhesive, UL94 V-0 P.17

TSE3331 Heat Flowable, UL94 V-0 P.14 P.17 P.19

Heat

TSE3380 Addition Heat Flowable, High Thermal Conductivity P.12 P.18

TSE3032 Addition Flowable, Non-Adhesive P.17TSE3033 Addition Flowable P.14 P.17TSE3062 Addition Heat Flowable, Gel, P.15XE14-7393 Addition Heat Flowable, Gel, Low Volatility P.16

TSE3070 Addition Heat Flowable, Gel, High-Elongation P.16

Heat

XE14-B7892 Addition Heat Flowable, Non-Adhesive, UL94 V-0 P.17

TSE3080 Addition Heat Semi-Flowable, UL94 V-1 P.15TSE3081 Addition Heat Semi-Flowable, UL94 V-1 P.15

TSE3380

Addition

TSJ3175 Addition Heat Gel, Semi-Flowable P.18XE14-B5778 Addition Heat Rubber, Semi-Flowable P.18

TSE 3080TSE 3081

Addition Heat Semi-Flowable,

Addition Heat Semi-Flowable P.15

P.15

7

P.19

Heat Flowable, High Thermal Conductivity P.12 P.18

GE Bayer Silicones

P.17P.16

P.16P.16

P.14

P.19P.19

TSE3364 Condensation Flowable, UL94 V-0RoomTemperature P.12 P.17

TSE350 Condensation Flowable

TSE3331K-EX Heat Flowable, UL94 V-0Addition P.14 P.17 P.19

P.17

P.12TSE3320 Addition Semi-FlowableRoomTemperature

Addition

ThermallyConductive

FlameRetardant

RoomTemperature

Selection Guide / Product List

1 Part Condensation Cure Property and Feature Matrix

RTV silicone adhesives and sealants are widely used in adhesion, coating, and potting applications.Viscosity and flowablility of the material are key factors in the selection of the right RTV grade for each application. GE Advanced Materials Silicones offers a wide range of grades in various levels of flowability.

Non-Flowable High Viscosity Solvent TypeFlowableLow Viscosity

FlowableExtra-Low Viscosity

Flowable

Standard Grades Low Volatility Grades

GeneralPurpose

FlameRetardant

HeatResistant

ThermallyConductive

GeneralPurpose

FlameRetardant

HeatResistant

ThermallyConductive

TSE392 TSE3854D TSE3941 TSE3925 TSE3945 TSE3946

RTV 162 TSE3946

TSE3941

TSE399 TSE3995

TSE3991 TSE3996

Feature

Property

elba

wol

F-n

oN

Med

ium

RTV 142

IS802/803/806/808

RTV102/103/108/109

RTV1473

RTV157

RTV159

RTV1106

RTV106

TSE3944

Sem

i-Fl

owab

le

TSE397 TSE3941M TSE3975 XE11-A5133S TSE3976-B

TSE3971

TSE3972

RTV160

XE11-A5133S

Hig

hVi

scos

ity

RTV112 RTV116Flow

able

Alkoxy Acetoxy

8

Low

Visc

osity

Extr

a Lo

wVi

scos

ity

Adhesion and Sealing

9

Adhesion and Sealing 1 Part Condensation Cure

Cure Type Alkoxy

Product Code TSE3941M TSE3944 TSE3945 TSE3946 TSE397 TSE3971 TSE3972

Feature General Flame Retardant Flame Retardant Flame Retardant General Purpose General Purpose General Purpose

Property Flowable Semi-Flowable Non-Flowable Non-Flowable Flowable Flowable Flowable

Viscosity (23°C) Pas {P} 50 {500} - - - 50 {500} 100 {1000} 50 {500}

Tack Free Time min 5 5 5 5 10 10 5

Density (23°C) 1.64 1.31 1.45 1.70 1.04 1.04 1.04

Hardness 63 38 51 68 20 16 15

Tensile Strength 3.2 {33} 1.5 {15} 2.9 {30} 3.9 {40} 1.2 {12} 1.5 {15} 1.3 {13}

Elongation % 70 170 200 100 300 350 350

Adhesive Strength 1.4 {14} 1.0 {10} 1.5 {15} 1.6 {16} 1.0 {10} 1.2 {12} 1.2 {12}

Linear Expansion 1/K - - - - 2.1x10-4 2.1x10-4 2.1x10-4

Thermal Conductivity 0.83 {2.0x10-3} 0.36 {8.0x10-4} 0.34 {8.0x10-4} 0.83 {2.0x10-3} 0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4}

Volume Resistivity 4.0x1014 1.0x1015 1.0x1015 4.0x1014 2.0x1015 2.0x1015 2.0x1015

Dielectric Strength kV/mm 21 22 22 23 22 21 21

Dielectric Constant (60Hz) 4.0 3.8 4.5 4.0 2.9 2.9 2.9

Dissipation Factor (60Hz) 0.04 0.02 0.05 0.04 0.005 0.005 0.005

Remarks - UL94 V-0 UL94 V-0 UL94 V-1 - - -

Low Volatility Low VolatilityLow VolatilityPurpose

g/cm3

W/(mK) {cal/(cms °C}

ohm cm

GE Bayer Silicones

Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.

(shore A)


Cure Type Alkoxy

Product Code RTV142 RTV160 TSE3854D TSE392 TSE3925 TSE3941

Feature General Purpose General Purpose Flame Retardant General Purpose Flame Retardant

Property Non-FlowableLow Valatility

FlowableUL94HB

Non-Flowable Non-Flowable Non-Flowable Non-Flowable

Viscosity (23°C) Pas {P} Spreadable paste 38 {380} - - - -

Tack Free Time min 240 240 15 5 5 5

Density (23°C) 1.09 1.04 1.32 1.04 1.04 1.65

Hardness 34 25 40 26 30 60

Tensile Strength 3.8 {39} 1.9 {19} 2.7 {28} 1.6 {16} 1.6 {16} 2.9 {30}

Elongation % 400 230 260 430 350 100

Adhesive Strength MPa {kgf/cm2} - - 2.2 {22} 1.3 {13} 1.3 {13} 1.4 {14}

Linear Expansion 1/K 27x10-5 27X10-5 - 2.1x10-4 - 1.6x10-4

Thermal Conductivity W/(mK) {cal/(cms°C)}. 0.21 0.21 0.34 {8.0x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.83 {2.0x10-3}

Volume Resistivity 4.5x1015 4x1014 2.0x1014 2.0x1015 2.0x1015 4.0x1014

Dielectric Strength kV/mm 20 20 25 22 22 22

Dielectric Constant (60Hz) 2.8 2.8 3.1 2.9 2.9 4.0

Dissipation Factor (60Hz) 0.001 0.001 0.02 0.005 0.005 0.04

Remarks - - UL94 V-0

Low Volatility

UL94 V-1

. ohm cm

g/cm3

-UL94HB

General Purpose

(shore A)

MPa {kgf/cm2}

MPa {kgf/cm2}

MPa {kgf/cm2}

Product List


10


Cure Type Alkoxy

Product Code

Feature

Property Viscosity (23°C) Pas {P}

Tack Free Time min

Density (23°C)

Hardness

Tensile Strength MPa {kg/cm2}

Elongation %

Adhesive Strength MPa {kg/cm2}

Linear Expansion 1/K

Thermal Conductivity W/(mK) {cal/(cms°C)}.

Volume Resistivity

Dielectric Strength kV/mm

Dielectric Constant (60Hz)

Dissipation Factor (60Hz)

Tested at 1kHz

ohm cm

g/cm3


Cure Type Acetoxy

Product Code

Feature

Property Viscosity (23°C) Pas {P}

Tack Free Time min

Density (23°C)

Hardness

Tensile Strength MPa {kgf/cm2}

Elongation %

Adhesive Strength



Volume Resistivity




Tested at 1 kHz

ohm cm

g/cm3

TSE3975 TSE3976-B XE11-B5320

General Purpose Heat Resistant Thermally

Flowable Flowable Non-Flowable

33 {330} 100 {1000} -

10 5 5

1.05 1.08 2.59

25 30 80

1.2 {12} 1.7 {17} 3.6 {37}

220 170 40

1.2 {12} 1.8 {18} 1.3 {13}

- - -

0.21 {5.0x10-4} 0.18 {4.4x10-4} 1.3 {3.1x10-3}

2.0x1015 1.0x1015 2.0x1015

23 20 17

2.9 3.5 2.6

0.005 0.01 0.005

Low Volatility Low VolatilityConductive

Low Volatility

RTV162 RTV5242RTV 5243/RTV 5249

IS802/803/808

General Purpose

Non Flowable -

240 45

1.09 1.5

35 40

3.8 {39} 2.2 {22}

400 425

- -

27x10-5 -

0.21 -

3.0x1015 3.0x1015

18 20

2.8 2.8

0.001 0.001

General Purpose

UL94HB

General Purpose

Non-FlowableUL94HBUL94HB

-

25

1.04

23

-

450

1.0 {10}

30x10-5

0.21

2.5x1014

20

2.9

0.0026

20

1.05

30

2.8{29}

450

-

27x10-5

0.21

3.1015

20

2.8

0.001

General Purpose

Non-Flowable

RTV102/103RTV108/109 RTV112/118

General Purpose

Flowable

20

1.05

25

2.3{23}

325

-

27x10-5

0.21

6.1014

16

2.8

0.001

20 {200}

Non-Flowable

45

1.09

28

6.9{70}

825

-

27X10-5

0.21

7.5x1014

20.7

2.9

0.0009

Paste

Non-Flowable

45

1.09

28

7.2{73}

825

-

27x10-5

0.21

1.1x1015

19.7

2.6

0.0007

Paste

Non-Flowable

20

1.45

39

3.3{34}

200

-

-

-

-

-

-

-

Paste

RTV157 RTV159 FRV1106

High Strenght High Strenght

30

1.05

22

1.7{17}

425

0.5 {5.4}

30x10-5

0.21

2.2x1014

20

2.9

0.002

Acetoxy

RTV106

Non-Flowable

20

1.07

30

2.6 {26}

400

1.4

27x10-5

3.0x1014

20

2.8

0.001

RTV116

Heat Resistant

FlowableSelf-Leveling

Red

30

1.09

20

2.5{25}

350

0.7

27x10-5

2.0x1014

16

2.8

0.001

Non-FlowableUL94HB

spreadable paste

General Purpose

IS806

0.21 0.21


(shore A)

(shore A)

25 {250}Soft,

spreadable paste

Heat Resistant

MPa {kgf/cm2}

High Strenght

RTV1473

General Purpose

Non-FlowableOil Resistance

25

1.06

30

3.1{31}

500

1.4 {14}

-

-

-

-

-

-

-

Soft paste


11

GE Bayer Silicones

Adhesion and Sealing 1 Part Addition Cure

Cure Type Heat Cure

Product Code

Feature

Property

Viscosity (23°C) Pas {P}

Cure condition °C/Hr

Density (23°C)

Hardness


Elongation %

Adhesive Strength MPa {kgf/cm2}


Thermal Conductivity W/(mK) {cal/(cms°C)}

Volume Resistivity




Flame Retardant

ohm cm

g/cm3

Appearance

TSE3212 TSE322 TSE322S TSE3221S

General Purpose General Purpose General Purpose General Purpose

Semi-Flowable Flowable Non-Flowable Flowable

White Light Blue, Black Light Blue Translucent

TSE326 TSE326MEX

Heat Resistant

Flowable Flowable

Reddish Brown Reddish Brown

TSE3260

Heat Resistant

Flowable

Reddish Brown

280 {2800} 180 {1800} 70 {700} 58 {580}

150/1 150/1 150/1 150/1

1.26 1.27 1.26 1.03

52 45 37 28

3.7 {38} 3.4 {35} 3.6 {37} 2.8 {29}

240 230 230 370

2.6 {26} 2.5 {25} 2.5 {25} 2.5 {25}

1.9x10-4 1.9x10-4 2.1x10-4 2.1x10-4

0.29 {6.9x10-4} 0.29 {6.9x10-4} 0.29 {6.9x10-4} 0.18 {4.4x10-4}

2.0x1015 2.0x1015 1.0x1015 6.0x1015

20 20 25 23

3.2 3.1 3.1 2.8

0.001 0.006 0.006 0.001

- - UL94V1

28 {280} 16 {160}

150/1 200/0.5

1.45 1.46

43 38

3.4 {35} 2.9 {30}

170 180

2.0 {20} 1.5

1.7x10-4 1.1x10-4

0.41 {9.7x10-4} 0.41

2.0x1015 2.0x1015

22 22

3.3 3.3

0.02 0.02

23 {230}

150/1

1.34

35

1.7 {17}

250

0.5 {5}

1.9x10-4

0.18 {4.4x10-4}

1.0x1015

25

3.1

0.01UL94HB

ULTI 190°C

General Purpose

- -


Cure Type Heat Cure

Product Code

Feature

Property


Tack Free Time min

Density (23°C)

Hardness


Elongation %




Volume Resistivity




ohm cm

g/cm3

Appearance

RTV6424

General Purpose

Non-Flowable

White

Paste

150/1

1.17

30

4.6 {47}

550

2.0

-

-

1.0x1015

20

2.9

0.003

TSE3261-G

Heat Resistant

Flowable

Gray

80 {800}

150/1

1.48

54

4.9 {50}

160

1.8 {18}

1.7x10

0.41 {9.7x10-4}

2.0x1015

22

3.3

0.02

TSE3280-G

Flowable

Gray

60 {600}

150/1

2.10

62

3.2 {33}

110

2.0 {20}

2.2x10-4

0.88 {2.1x10-3}

2.5x1014

21

4.3

0.002

TSE3281-G

Flowable

Gray

60 {600}

150/1

2.70

84

4.5 {46}

50

2.5 {25}

1.4x10-4

1.68 {4.0x10-3}

4.8x1014

15

5.2

0.002

TSE3282-G

Flowable

Gray

20 {200}

150/1

2.70

80

4.0 {41}

50

2.5 {25}

1.4x10-4

2.0 {4.8x10-4}

4.8x1014

23

5.5

0.001

High ThermalConductivity


ThermalConductive

Acetoxy

1 Part Condition Cure


(shore A)

(shore A)

LVG342

Low Volatile

Thixo Paste

White

10:1

12

150/1

1.19

4.5 {46}

275

-

-

1.1x1014

20

-

-

Thixotropic paste

-

40

Product List


12


Cure Type Room Temperature Cure

Product Code

Feature

Property

Density (23°C)

Hardness


Elongation %




Volume Resistivity




Frenquency Tested

ohm cm

g/cm3

Appearance

Curing Conditions

Pot Life

Viscosity (after mixing) Pas{P}

Mixing Ratio ((A):(B))

TSE3380

High Thermal

1.4x10-4

2.1x106

Conductivity

Flowable

Grey

100:100

8

160/0.6

2.70

70

2.6 {26}

100

1.6 {16}

1.68 {4.0x10}

16

6.7

40 {400}

0.002

-


Cure Type Room Temperature

Product Code

Feature

Property

.

Appearance

Density (23°C)

Hardness


Elongation %



Volume Resistivity




g/cm3

Curing Conditions

Pot Life



Tack Free Time

Low viscosity/Self Bonding

Flowable

Off-White

100:2

0.5

23/72

1.19

35

1.4 {14}

130

1.9x10-4

0.29

1.0x1015

20

3.1

0.025

4.0 {40}

-

(23°C) hr

min.

°C/Hr

(23°C) hr

°C/Hr

ohm cm


(shore A)

(shore A)

TSE3320

Flame Retardant

Flowable UL94 V-0

Grey

100:7.5

-

0.1

23/72

1.41

65

4.0{40}

0.42 }1.0x10-3}

-

5x1015

26

3.1

0.01

3.0 {30}

-

TSE3664

General Purpose

1.7x10-4

1.5x1015

Semi-Flowable

White

100:100

4

100/1.0

1.54

70

5.9 {60}

100

2.0 {20}

0.63 {1.5x10-4}

23

3.3

65 {650}

0.0007

-

TSE3663 D1-SEA210

Self Bonding

Non-Flowable

Dark Grey

100:8

35

0.6

RT/24

-

37

2.1{21}

-

-

-

-

-

-

Thixotropic paste

255

-

Coating Silicones

13

Coating Silicones 1 Part Condensation Cure

Cure Type Alkoxy

Product Code

Feature

Property


Tack Free Time min

Density (23°C)

Hardness

Tensile Strength

Elongation %



Thermal Conductivity W/(mK) {cal/(cm°C)}.

Volume Resistivity




Flame Retardant

ohm cm

g/cm3

TSE3941M TSE3944 TSE397 TSE3971 TSE3972 TSE3975 TSE3976-B

GeneralPurpose

Flame Retardant Fast Cure Fast Cure Fast Tack Free Heat Resistant

Flowable Paste Semi-Flowable Semi-Flowable Flowable Flowable Flowable

50 {500} - 50 {500} 100 {1000} 50 {500} 33 {330} 100 {1000}

5 5 10 10 5 10 5

1.64 1.31 1.04 1.04 1.04 1.05 1.08

63 38 20 16 15 25 30

3.2 {33} 1.5 {15} 1.2 {12} 1.5 {15} 1.3 {13} 1.2 {12} 1.7 {17}

70 170 360 350 350 220 170

1.4 {14} 1.0 {10} 1.0 {10} 1.2 {11} 1.2 {10} 1.2 {12} 1.8 {18}

Low Volatility

0.83 {2.0x10-3} 0.36 {8.0x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.21 {5.0x10-4} 0.18 {4.4x10-4}

4.0x1014 1.0x1015 2.0x1015 2.0x1015 2.0x1015 2.0x1015 1.0x1015

21 22 22 21 21 23 20

4.0 3.8 2.9 2.9 2.9 2.9 3.5

0.04 0.02 0.005 0.005 0.005 0.005 0.01

UL94 V-0 - - - UL94HB

Low VolatilityLow Volatility

- -

2.1x10 -4 2.1x10 -4 2.1x10 -4- - - -

Coating Silicones 1 Part Condensation Cure

Cure Type Alkoxy

Product Code

Feature

Property


Tack Free Time min

Density (23°C)

Hardness

Tensile Strength

Elongation %

Adhesive Strength



Volume Resistivity




Flame Retardant

ohm cm

TSE399 TSE3991 TSE3995 TSE3996

Fast Cure Ultra Low viscosity Fast Cure Fast Cure

Flowable Flowable Flowable Flowable

2.5 {25} 1.5 {15} 2.5 {25} 1.7 {17}

10 10 10 10

1.04 1.03 1.04 1.03

25 19 25 23

1.3 {13} 0.7 {7} 1.3 {13} 1.2 {12}

140 150 140 150

0.3 {3} 0.2 {2} 0.5 {5} 0.3 {3}

Low Volatility Low Volatility

0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4} 0.18 {4.4x10-4}

2.0x1015 2.0x1015 2.0x1015 2.0x1015

2.9 2.9 2.9 2.9

0.005 0.005 0.005 0.005

- -

XE11-A5133S

Flame Retardant

Flowable

60 {600}

10

1.64

63

3.9 {40}

100

1.3 {13}

Low Volatility

0.83 {2.0x10-3}

4.0x1014

4.0

0.04

UL94 V-1- -

- - -

20 18 23 20 20

GE Bayer Silicones


(shore A)

g/cm3

(shore A)

MPa {kgf/cm2}

MPa {kgf/cm2}

MPa {kgf/cm2}

-

13 {130}

Product List

Coating Silicones

14

Coating Silicones 1 Part Addition Cure

Cure Type Heat Cure

Product Code

Feature

Property


Density (23°C)

Hardness


Elongation %




.

Volume Resistivity




ohm cm

g/cm3

Appearance

Curing Condition

TSE3250

Low Viscosity

Flowable

Transparent

1.3 {13}

150/1

0.97

12

-

-

0.1 {1}

2.5x10-4

0.17 {4.1x10-4}

2.0x1015

21

2.8

0.001

TSE3251

General Purpose

Semi-Flowable

White

8.5 {85}

150/1

1.02

16

0.7 {7}

200

0.4 {4}

0.18 {4.3x10-4}

2.0x1015

20

2.8

0.002

TSE3251-C

General Purpose

Semi-Flowable

Translucent

7.0 {70}

150/1

1.02

16

0.7 {7}

200

0.4 {4}

0.18 {4.3x10-4}

2.0x1015

20

2.8

0.001

TSE3212 TSE3221S

General Purpose General Purpose

Semi-Flowable Flowable

White Translucent

280 {2800} 58 {580}

150/1 150/1

1.26 1.03

52 28

3.7 {38} 2.8 {29}

240 370

2.6 {26} 2.5 {25}

1.9x10-4 2.1x10-4

0.29 {6.9x10-4} 0.18 {4.4x10-4}

2.0x1015 6.0x1015

20 23

3.2 2.8

0.001 0.001

TSE325

Low Viscosity

Flowable

White

4.0 {40}

150/1

1.02

12

0.7 {7}

200

0.4 {4}

2.1x10-4

0.18 {4.3x10-4}

2.0x1015

21

2.9

0.001

Coating Silicones 1 Part Addition Cure

Cure Type

Product Code

Feature

Property


Pot Life (25°C) hr

Density (23°C)

Hardness


Elongation %




.

Volume Resistivity




ohm cm

g/cm3

Appearance

Curing Condition

TSE3251H TSE3251H-C

General Purpose General Purpose

Semi-Flowable Semi-Flowable

White Translucent

13 {130}

150/1 150/1

1.03 1.03

17 17

1.0 {10} 1.0 {10}

220 220

0.6 {6} 0.6 {6}

2.1x10-4 2.1x10-4

0.18 {4.3x10-4} 0.18 {4.3x10-4}

2.0x1015 2.0x1015

20 20

2.8 2.8

0.001 0.001

13 {130}


(shore A)

(shore A)

Self Bonding

Flowable

Transparent

6

150/0.5

1.01

30

1.0 {10}

130

0.3 {3} (glass)

2.3x10-4

0.17 {4.1x10-4}

2.0x1015

21

2.8

0.001

Flame Retardant Flame Retardant

Flowable Flowable

Gray Black

8 4

120/1 120/1

1.51 1.43

60 50

2.9 {30} 3.0 {30}

50 270

1.3 {13} 3.9 {40}

1.7x10-4

0.63 {1.5x10} 0.53 {1.3x10-3}

2.0x1014 6.0x1015

26 22

3.4 3.1

0.017 0.015

13 {130}13 {130}

TSE3033 TSE3331 TSE3331K-EX

2 Part Addition Cure

Heat Cure

1 Part Rubber

Alkoxy

TSE399 TSE3991 TSE3995 TSE3996

Fast Cure Ultra Low viscosity Fast cure Fast cure

Flowable Flowable Flowable Flowable

2.5 {25} 1.5 {15} 2.5 {25} 1.7 {17}

10 10 10 10

1.04 1.03 1.04 1.03

25 19 25 23

1.3 {13} 0.7 {7} 1.3 {13} 1.2 {12}

140 150 140 150

0.3 {3} 0.2 {2} 0.5 {5} 0.3 {3}

Low Volatility Low Volatility

} 0.18 {4.4x10-4} 0.18 {4.4x10-4 0.18 {4.4x10-4} 0.18 {4.4x10-4

2.0x1015 2.0x1015 2.0x1015 2.0x1015

2.9 2.9 2.9 2.9

0.005 0.005 0.005 0.005

- - -

XE11-A5133S

Flame Retardant

Flowable

60 {600}

10

1.64

63

3.9 {40}

100

1.3 {13}

Low Volatility

0.83 {2.0x10-3}

4.0x1014

4.0

0.04

UL94 V-1- -

- - - -

20 18 23 23 20

Addition Cure

TSE325

Low Viscosity

Flowable

4.0 {40}

150/1

1.02

12

0.7 {7}

200

0.4 {4}

2.1x10-4

0.18 {4.3x10-4}

2.0x1015

21

2.9

0.001

TSE3250

General Purpose

Flowable

1.3 {13}

150/1

0.97

-

-

0.1 {1}

2.5x10-4

0.17 {4.1x10-4}

2.0x1015

21

2.8

0.001

-

9

Potting Silicones

15

GE Bayer Silicones

Cure Type

Product Code

Feature

Mixing Ratio ((A)(B))


Density (23°C)

Volume Expansion 1/K


Volume Resistivity




ohm cm

g/cm3

Appearance

Pot Life (23°C) min

Curing Conitions

Penetration

2 Part Gels

Addtion Cure

TSE3062 XE14-B7393 TSE3070

General Purpose High Elongation

Transparent Transparent Transparent

100:100 100:100 100:100

60 30 4

70/0.5 23/24 70/0.5

0.97 0.97 0.98

1.0x10-3 1.0x10-3 1.0x10-3

0.17 {4.1x10-4} 0.17 0.17 {4.1x10-4}

2.0x1015 1.0x1015

18 18 18

2.7 2.7 2.7

0.001 0.002

1.0 {10} 6.5 {65} 0.8 {8}

55

Low Volatility

65

2.0x1015

100

Potting Rubber Cure Type

Product Code

Feature

Property


Tack Free Time min

Density (23°C)

Hardness


Elongation %




Volume Resistivity




Remarks

ohm cm

g/cm3

°C/Hr

0.1 mm

Potting Gels


(shore A)

TSE3051

Heat Cure

Transparent

0.7 {7}

0.97

85

1.0x10-3

0.17

1x1015

18

2.8

0.001

125/2

1 Part Gels

Addition Cure

-

-

-


Black

100:100

20.0 {200}

1/100

2.5

-

-

1.26 {3.0x10-3}

1.0x1015

22

5.0

0.003

3

TSE3081

ThermalConductivity

Black

100:100

7.0 {70}

1/100

1.5

-

0.63 {1.5x10-3}

1.0x1015

22

3.3

0.04

3

TSE3080

--

-

33x10-5

1.2x1015

240

100/1

1.04

45

6.5 {66}

120

-

0.2

19.7

2.7

0.0004

RTV655 RTV6166 RTV6196

General PurposeGel

Flowable

Clear

1:1

120

150/0.5

0.98

-

-

-

27x10-5

0.19

1.0x1015

20

2.8

0.001

1kHz

0.75 {7.5}

General PurposeGel

Flowable

Clear

1:1

15

150/0.5

0.98

-

-

-

27x10-5

0.19

1.0x1015

20

2.8

0.001

1kHz

0.75 {7.5}

Flowable

Clear

10:1

5.2 {52}

1kHz

Low Temperature Resistant

- -

Product List

Potting Silicones

16

Potting Rubber 2 Part Rubber

Cure Type Addition Cure

Product Code

Feature

Property

Density (23°C)

Hardness


Elongation %




Volume Resistivity




Frenquency Tested

ohm cm

g/cm3

Appearance

Curing Conditions

Pot Life



RTV6428

Flame Retardant

Flowable

Dark Grey Clear

1:1 10:1

4

100/1

-

62

3.3 {34}

60

-

21.6x10-5 27.0x10-5

0.31 0.2

5.7x1014 1.8x1015

20.9

3.09

0.0061

RTV615

240

100/1

1.02

44

6.5 {66}

120

-

19.7

2.7

0.0006

1kHz

1.3 {13} 4 {40}

1kHz


Cure Type Condensation Cure

Product Code

Feature

Property Appearance

RTV567

Low Outgassing

Flowable

Translucent

100:0.1

1260

9

RT/168

1

20

-

25x10-5

0.29

1.1x1015

20.3

3.3

0.006

3.9 {39}

Density (23°C)

Hardness


Elongation %



Volume Resistivity




Frenquency Tested

g/cm3

Curing Conditions

Pot Life



Tack Free Time

-

RTV560

Low TemperatureResistant

Flowable

Red

100:0.5

-

2.25

25/24

1.42

55

4.8 {49}

20x10-5

0.31

2.0x1014

3.9

0.02

30 {300}

120

21.2

1kHz 1kHz

min.

min.

°C/Hr

(25°C) hr

°C/Hr

ohm cm


General Purpose

Flowable

(shore A)

(shore A)

RTV88

High Temperature

Spreadable paste

Red

-

-

0.75

RT/24

1.47

58

6.0 {60}

20x10-5

0.31

2.8x1014

4.3

0.03

880 {8800}

120

17.4

-

RTV60

High Temperature

Flowable

Red

-

-

2

RT/24

1.48

57

7.0 {71}

20x10-5

0.31

4.4x1014

4.0

0.02

47 {470}

120

17.7

-

TSE3663

Self Bonding

Flowable

Off-White

100:2

0.5

23/72

1.19

35

1.4 {14}

130

0.9 {9}

1.9x10-4

0.29 {6.4x10-4}

1.0x1015

20

3.1

0.025

4.0 {40}

-

Potting Silicones

17


Cure Type Addition Cure

Product Code

Feature

Property

Density (23°C)

Hardness


Elongation %




Volume Resistivity




Remarks

g/cm3

Appearance

Curing Conditions

Pot Life

Viscosity (after mixing) Pas{p}


TSE3033

Self Bonding

Flowable

Transparent

100:100

6

150/0.5

1.01

30

1.0 {10}

130

0.3 {3} (glass)

2.3x10-4

0.17 {4.1x10-4}

2.0x1015

21

2.8

0.001

1.0 {10}

TSE3032

General Purpose

Flowable

Transparent

100:10

4

100/1

1.02

35

4.5 {46}

210

-

2.3x10-4

0.17{4.1x10-4}

2.0x1015

21

2.8

0.001

4.0 {40}

AdhesiveNon-Adhesive

TSE3331 TSE3331K-EX

Flame Retardant Flame Retardant

Flowable Flowable

Gray Black

100:100 100:100

8 4

120/1 120/1

1.51 1.43

60 50

2.9 {30} 3.0 {30}

50 270

1.3 {13} 3.9 {40}

1.7x10-4

0.63 {1.5x10} 0.53 {1.3x10-3}

2.0x1014 6.0x1015

26 22

3.4 3.1

0.017 0.015UL94 V-0

3.5 {35} 3.0 {30}

Adhesive Adhesive

TSE3431-H

Flame Retardant

Flowable

Black

100:10

1.5

100/1

1.52

74

4.1 {42}

60

-

1.7x10-4

0.63 {1.5x10-3}

5.0x1014

27

3.5

0.01UL94 V-0

4.0 {40}

Non-Adhesive

XE14-B7892

Flame Retardant

Flowable

Black

100:100

2

60/1

1.39

60

3.5 {36}

100

-

1.9x10-4

2.5x1015

27

3.1

0.01UL94 V-0

1.3 {13}

Non-Adhesive

0.44 {1.1x10-3}

ohm cm

°C/Hr

Condensation Cure

(23°C) hr


(shore A)

ohm cm


Cure Type Condensation Cure

Product Code

Feature

Property

Density (23°C)

Hardness


Elongation %




Volume Resistivity




Frenquency Tested

g/cm3

Appearance

Curing Conditions

Pot Life

Viscosity (after mixing) Pas{p}


RTV511

General Purpose

Flowable

White

100:0.5

1.5

25/24

1.21

42

2.7 {28}

170

-

22x10-5

2.0x1014

20.5

3.6

0.005

1kHz

16 {160}

0.26

RTV566

Low Outgassing

Flowable

Red

100:0.1

1.5

RT/24

1.49

61

5.6 {57}

120

-

20x10-5

21.2

3.9

0.02

42.7 {427}

0.31

RTV577


Paste

white

100:0.5

2

25/24

1.35

48

3.1 {32}

150

-

20x10-5

18.5

3.9

0.02

700 {7000}

0.31

RTV8111

MIL-S-23586 E

Flowable

white

100:2

0.5

25/24

1.18

45

2.5 {25}

160

-

19.7

3.3

0.0055

9.9 {99}

2.0x1014 5.6x1014 1.0x1015

1kHz1kHz1kHz

25x10-5

0.29

RTV8112

MIL-S-23586 E

Flowable

white

100:5

2

25/24

1.19

42

2.1 {21}

160

-

18.7

4.02

0.007

11 {110}

2.7x1015

1kHz

25x10-5

0.29

RTV8262

MIL-S-23586 E

Flowable

red

100:5

2

25/24

1.47

52

4.1{42}

150

-

18.5

3.98

0.017

47 {470}

4.4x1014

1kHz

20x10-5

0.31

°C/Hr

(25°C) hr

RTV11


Flowable

White

100:0.5

1.5

25/24

1.19

41

3.6 {36}

190

-

25x10-5

1.0x1015

20.3

3.3

0.006

1kHz

11 {110}

0.29

(shore A)

Flowable

Stone White

100:0.5*

1

23/72

1.18*

47

2.5 {25}

170

1.0x1014

22

3.1

0.025

12 {120}

General Purpose

TSE350

-

-

-

-

Flame Retardant

Flowable UL94 V-0

Grey

100:7.5

0.1

23/72

1.41

65

4.0{40}

0.42 }1.0x10-3}

-

5x1015

26

3.1

0.01

3.0 {30}

-

-

TSE3664

-

GE Bayer Silicones

*Tested at 23°C

Product List

Heat Conductive Silicone Grease

20

Low Volatility Grades

0.84 {2.0x10 0.84 {2.0x10

Heat Conductive Silicones Cure Type

Feature

Appearance

Density (23°C)

Thermal Conductivity

Volume Resistivity ohr cm



Silicone Grease

Penetration (JISK2220)

Bleed

Evaporation

WhiteWhite White

-3}0.84 {2.0x10-3} 0.84 {2.0x10-3} -3}

2.45

310

0.5

0.4

5.4

0.005

2.0x1014

2.46

290

0.0

0.4

5.0

0.006

2.0x106

2.50

300

0.2

0.2

5.0

0.005

2.0x1014

2.62

340

0.1

0.1

5.0

0.006

2.46

330

2.11)

0.41)

5.0

0.005

1.5x1014

Low VolatilityGood

Paintability

White

Low Volatility

(150 , 24h)

(150 , 24h)

oC

oC

g/cm3

. .soW/(m K) {cal/(cm C)}.

Low Volatility

Low Bleed High ThermalConductivity

1.00 {2.4x10 -3}

3.0x106

Heat ResistantLow Volatility

Typical property data values should not be used as specifications. 1) 200°C, 24Hr.

%

%

Low Molecular Weight Siloxane Content

Type Product CodeLow Molecular

Siloxane (D3-D10)wt%

TSE3925 0.028

TSE3944 0.028

TSE3945 0.025

TSE3946 0.025

TSE3975 0.028

TSE3976-B 0.025

TSE3995 0.028

TSE3996 0.028

XE11-A5133S 0.025

XE11-B5320 0.020

Grease

YG6240 0.003

YG6260 0.003

1 Part Condensation

Cure

YG6111 0.010

YG6260V 0.010

TSK5303 0.0015

Low molecular weight siloxane refers to cyclic dimethyl polysiloxane that due to its volatility, sublimates during and after cure. Low molecular weightsiloxane is known to cause electrical point interference. Low volatility grades are developed to limit the levels of low molecular weight siloxane.

Test Method: Gas ChromatographyEquipment: Capillary Gas Chromagraph

Hewlett-Packard HP 6890Column Temperature: 40°C - 310°CInjection Temperature: 260°C

Injection Amount: 1 micron 1

Extraction Menstruum: n-hexane


YG6260YG6111 YG6260V TSK5303 Product Code YG6240

White

UL Status

21

The following products are recognized by Underwriters Laboratories Inc.

IS802 White 1.2 only 105 105 4 HB 0 0 5 0IS803 Black 1.2 only 105 105 4 HB 0 0 5 0IS806 Red 1.9 only 105 105 - HB - - - -IS808 Translucent 1.2 only 105 105 4 HB 0 0 5 0

- -- -3 0- -- -3 0- -- -3 01 00 0- -- -

94V-1 - -94V-1 0 -94V-0 0 094V-0 - -94V-0 0 -94V-0 0 094V-1 - -94V-0 0 -94V-0 0 094V-0 0 094V-1 0 094HB - -94HB - -

TSE3941 White 0.75 - - -TSE3941 White 1.5 105 105 2TSE3941 White 3.0 105 105 1TSE3944-G Gray 0.75 105 105 -TSE3944-G Gray 1.5 105 105 0TSE3944-G Gray 3.0 105 105 0TSE3944-W White 0.75 105 105 -TSE3944-W White 1.5 105 105 0TSE3944-W White 3.0 105 105 0TSE3945 Gray 3.3 105 105 2TSE3946 White 3.0 105 105 1TSE3976-B Black 0.64 - - -TSE3976-B Black 1.5 - - -TSE3976-B Black 3.0 - - - 94HB - - - -

0D1-SEA210 Gray 2.5 only 105 105 3 HB 0 0 5 0TSE3331 Black 1.0 105 105 - 94V-0 - 0 0TSE3331 Black 1.6 105 105 2 94V-0 0 - - -TSE3331 Black 2.0 105 105 - 94V-0 - - - -TSE3331 Black 3.0 105 105 0 94V-0 0 - - -

TSE3431-H Gray 1.0 105 105 0 94V-0 0 0 1 1TSE3431-H Gray 1.5 105 105 - 94V-0 - - - -TSE3431-H Gray 2.5 105 105 0 94V-0 0 - - -TSE3431-H Gray 3.0 105 105 - 94V-0 - - - -XE14-B7892 Black 2.0 105 105 - 94V-1 - - - -XE14-B7892 Black 3.0 105 105 - 94V-0 - - - -

File No. E56745 and File No. E36952

PLC: Performance Level Category HWI: Hot Wire Ignition HAI: High-Current Arc Ignition HVTR: High-Voltage Arc Tracking RateD495: D495 High-Voltage Dry Arc Resistance CTI: Comparative Tracking Index

0 - - -0 - - -0 1 1 0- - - -0 - - -0 - - -0 0 5 00 - - -0 0 5 00 - - -0 0 5 00 - - -

- - - -

0 - - -0 - - -0 0 3 03 - - -

0 0 5 0

- - - -

HBHBHBHBHBHBHBHBHBHBHBHB

94V-1

94V-094V-094V-094V-0

HB

94v-0

RTV160 White 0.75 105 105 4RTV160 White 1.5 105 105 3RTV160 White 2.5 105 105 3RTV160 White 3.0 105 105 -RTV162 White 0.91 105 105 -RTV162 White 1.5 105 105 3RTV162 White 3.0 105 105 2RTV5242 White 1.5 105 105 3RTV5242 White 3.0 105 105 3RTV5243 Black 1.5 105 105 3RTV5243 Black 3.0 105 105 3RTV5249 Gray 1.5 105 105 3

XE11-A5133S White 3.0 105 105 -

TSE3854D-G Gray 0.75 105 105 0TSE3854D-G Gray 1.50 105 105 0TSE3854D-G Gray 3.0 105 105 0TSE3854D-W White 1.5 105 105 0

RTV5249 Gray 3.0 105 105 3

TSE3854D-W White 3.0 0105 105

GE Bayer Silicones

TSE3331K*EX Black 2.5 105 105 - 94V-0 - - - -TSE3331K*EX Black 3.0 105 105 - 94V-0 - - - -

TSE3664 Grey 1.0 105 105 - 94V-1 - - - -TSE3664 Grey 2.0 105 105 - 94V-0 - - - -TSE3664 Grey 3.0 105 105 - 94V-0 - - - -

HVTR(PLC)

CTI(PLC)

D495(PLC)

HWI(PLC)

UL94FlameClass

HAI(PLC)

Temperature

Elec. Mech.

oCMinimumThickness

mmProduct Code Color

TR

AP

EN

OT

RA

P O

WT

Type

Product List

1 Part Condensation Cure

22

ProductTube Can Pail

W B

YG6111YG6240YG6260YG6260VTSK5303

Package

roloC W W

esaerG

(200g) (1kg) (20kg)

(200g) (1kg) (20kg)

(200g) (1kg) (20kg)

(2kg)(1kg)(8kg)

Color Key: W: WhitePackaging: 200g Tube (20 per box) 1kg, 2kg Can (10 cans per box)

Silicone Grease

Product333ml Cartridge 1kg Can Can Pail Bttl

W C W C W C C C

Package

roloC

esopruP larene

Gtnadrate

R emalF

Hea

tRe

sist

ant

Ther

mal

ly C

ondu

ctiv

e

Color Key: W: White / C: Clear * TSE3876: Dark Brown

Packaging: 100g Tube (20 per box) 333ml Cartridge (10 x 5 boxes per case) 1kg Can (10 cans per box) Can (4 cans per box) 100g Bottle (20 per box) 500g Bottle (10 per box)

100g TubeW C

ColorW

Drum

TSE3877-BTSE3976-BTSE3876TSE3941 (150g)

TSE3941M (150g)

TSE3946 (150g)

XE11-A5133S (150g)

XE11-B5320

TSE397 (4kg)

TSE3971TSE3972TSE3975TSE399 (4kg)

TSE3991TSE3995TSE3996TSE3854DTSE3941 (150g)

TSE3944 (130g)

TSE3945TSE3946 (150g)

XE11-A5133S (150g)

(130g)(230g)

Legend5GP Pail (40.0LBS-18.16KG)55F Drum (540.0LBS-245.16KG1GP Pail (10.0LBS-4.54KG)5GP Pail (50.0LBS-22.7KG)55G Drum (450.0LBS-204.30KG)001 Kit (1.0LBS-0.457KG)002 Kit (2.0LBS-0.908KG)010 Pail Kit (10.0LBS-4.54KG)012 Pail Kit (12.1LBS-5.477KG)018 Pail Kit (18.0LBS-8.17KG)040 Pail (40.0LBS-18.16KG)044 Pail Kit (44.0LBS-19.97KG)080 Pail Kit (80.0LBS-36.32KG)440 Kit (440.0LBS-199.76KG)495 Kit (495.0LBS-224.73KG)06S Cartridge (0.39OLBS-0.177KG)

RTV142 White 06S RTV160 White 12C 5GPRTV162 White 12C 5GP 55GRTV5242 White 12C 5GP 55F RTV5243 Black 12C 5GP 55FRTV5249 Gray 12C 5GP 55FISO802 White 3TG 12C 5GP 55GISO803 Black 12C 5GP 55GISO808 Translucent 12B 5GP 55GISO806 Red 3TG 12C 5GP 55GRTV102 White 12T 12C 5GP 55GRTV103 Black 85G 12C 5GP 55GRTV108 Translucent 06S 55G 5GPRTV109 Aluminum 12B/12CRTV112 White 85G 12T 5GPRTV118 Translucent 85G 12T 5GP 55GRTV1473 Black 3TG 12C 5GP 55GTRV157 Grey 3TG 06S 55GRTV159 Red 3TG 06S/177G

FRV1106 Red 06S

TSE392TSE3925

1 Part Addition Cure

23

Product333ml Cartridge 1kg Can Pail BttlW C W C C C

Package

roloC

esopruP larene

G

taeHRe

sist

ant

Color Key: W: White / C: Clear * TSE3876: Dark Brown

Packaging: 100g Tube (20 per box) 333ml Cartridge (10 x 5 boxes per case) 1kg Can (10 cans per box) Can (4 cans per box) 100g Bottle (20 per box) 500g Bottle (10 per box)

100g TubeW C

ColorW

Drum

RTV6424 White - 06S

TSE3250TSE3251

TSE3251-CTSE3251HTSE3251H-CTSE326

TSE3260TSE3261-GTSE3280-G

TSE3281-GTSE3282-GTSJ3155

TSE3212TSE322TSE322STSE3221STSE325 (18kg)

TSE3051TSE3051-G

(20kg)

Ther

mal

lyCo

nduc

tive

Junctioncoating


TSE326MEXRedRed

Gray

Gray

GE Bayer Silicones

(140g) (310ml)

(25KG)(1.5KG)

1kg Can Can Pail Bottle

GeneralPurpose

AdditionCure

Packaging: 1kg, 1.5kg, 2kg Can (10 cans per box) 4kg, 5kg, 6kg Can (4 or 2 cans per box) 10g Bottle (100 per box) 30g, 100g Bottle (20 per box) 500g Bottle (10 per box)

Color DrumProductType

Product List / Technical information

2 Part Condensation and Addtion Cure

24


D1-SEA210 Dark Grey 1GP/5GP/10 55FRTV88 Red 001 012/050RTV60 Red 001 012/050RTV8262 Red 012RTV8111 White 001 012RTV8112 £White 012RTV577 White 012RTV567 Red 001RTV566 Translucent 001RTV560 Red 012RTV511 White 001 012RTV11 White 001 012/050 500TSE3331 (A/B: 1kg, 1.5kg ea) (A/B: 6kg ea) (A/B: 25kg ea)TSE3431-H (A: 1kg / B: 2.0, 2.5kg) (A: 20kg, 25kg) (B: 100g)XE14-B7892 (A/B: 1kg ea)

TSE3331 (A/B: 1kg, 1.5kg ea) (A/B: 6kg ea) (A/B: 25kg ea)TSE3380 (A/B: 1kg ea)

TSJ3175 (A/B: 500g ea)XE14-B3445XE14-B5778

(A/B: 500g ea)

(A/B: 500g ea)

RTV6428 Dark Grey 002 100RTV615 Clear 01 010/044/5GP 440RTV655 Clear 001 010RTV6166 Clear 002 018/080RTV6196 Clear 002 080LVG342 White 040

FlameRetardant

ThermallyConductive

Junction Coating

Heat Resistant

TSE3663 (A: 1kg) (A: 18kg) (B: 30g, 500g)TSE3032 (A: 1kg) (A: 15kg) (B: 100g, 500g)TSE3033 (A/B: 1kg ea) (A/B: 18kg ea)

TSE3062 (A/B: 1kg ea) (A/B: 5kg ea) (A/B: 18kg ea)XE14-B7393 (A/B: 1kg ea)

TSE3070 (A/B: 1kg ea)

TSE3380 (A/B: 1kg ea)

TSE3431 (A: 18kg) (B: 100g)(A: 1kg / B:1.8kg)

CondensationCure

Curing Properties: 1 Part Condensation Cure

25

Test Conditions Rate of Cohesive Failure%

Initial Measurement 150+°C, 1h 100

80°C, 90RH, 250h 100

)A epyT( ssend ra

H

0

10

20

30

40

50

54321Cure Time h

Hardness and Cure Time

6 7 8

150

120100

80

oC

oC

oC

oC

0

1

2

3

4

5

6

12096724824Cure Time h

mm htpe

D eruC

TSE392 (Alkoxy)

30 ,60%RHoC20 ,90%RHoC20 ,60%RHoC20 ,30%RHoC10 ,60%RHoC

One part condensation cure silicone adhesives and sealantscure when exposed to atmospheric moisture. The cureprocess begins from the outer surface, and therefore time isrequired for deep section cure. The cure time is affected bythe reaction mechanism and viscosity. At 25 oC, 50%RH, itgenerally requires 10-60 minutes for the surface to becometack free, allowing the workpiece to proceed to the nextprocess. Sufficient adhesion is achieved after 5-15 hours,allowing the workpiece to be moved. Elasticity is achievedafter 1-3 days of cure time, and full material properties suchas electronic performance is achieved after 7 days.

Curing performance of addition cure silicone adhesives and sealants is demonstrated by changes in hardness and adhesion strength of TSE322 at temperatures between 80 and 150°C.

0

1

2

3

54321Cure Time h

aP

M htgnertS evisehd

A rae hS

Shear Adhesive Strength and Cure Time

6 7 8

150

120100

80

oC

oCoC

oC

Curing Properties: Addition Cure

TSE322 shear adhesive strength in relation totemperature / humidity

GE Bayer Silicones


Technical Information

Curing Properties: 1 Part Condensation Cure

26

10mm1mm

25mm

substrate

sealant

Shear Adhesion Test Method

Shear adhesive strength is measured at a pull rate of 10mm/min,using test pieces curred according to specific conditions and time.

0

0.1

0.2

0.3

0.4

10987654321Cure Time h

aP

M htgnertS evis ehd

A raehS

T S E 392 (Alko

xy)

Adhesion Conditions: Aluminum substrate 20 ,60%RH Primerless

Test Speed: 10mm/min

oC

0

0.3

0.6

0.9

1.2

1.5

151413121110987654321Cure Time days

aP

M htgne rtS evi sehd

A rae hS

Adhesion Conditions: Aluminum substrate 20 ,60%RH PrimerlessTest Speed: 10mm/min

oC

Adhesion strength gradually emerges after 2-10 hours. Full adhesion occurs at approximately 7 days.

TSE392 Adhesive S trength and Curing T ime

TSE392 shear adhesive strength test using an aluminum substrate.

Manifest ation of Adhesive Strength

Pros and Cons of Curing MechanismOne part condensation cure RTVs are categorized into Alkoxy,Oxime and Acetoxy, based on by-products of the curemechanism. The pros and cons of each need to be consideredduring material selection.

Pros

Alkoxy

Adhesion

No irritating odor

Cons CorrosionStorageStability

Cure Speed

tsaFeru

Cwol

Ser u

C

Acetoxy

No corrosionFast cure

No irritating odorNo corrosion

High strengthStrong AdhesionGood transparencyFast cure

Fast

Slow

Fast

Solvent crack onpolycarbonate

Acetic acid odor

Slow Cure

Corrosion ofmetals and stones

excellent good poor

SS4004P SS4044P SS4120 SS4155

Appearance Pink Light YellowClear,

Colorless Blue

SpecificGravity

0.85 0.85 0.82 0.82

Solid Content, %. 15 15 3 10

Primer Properties

SS4179

Clear,Colorless

0.98

6

Flash Point(Pensky-Martin

Closed Cup)

Dry Time,Minutes

30 30 30 30

Flammability

RecommendedRTVs

-3°C (27°F)-12°C (10°F) -12°C (10°F) -05.°C(31°F) 37°C (98°F)

15

Flammable FlammableFlammableFlammableFlammable

1 & 2 PartCondensation

1 PartCondensation

All1 & 2 PartAddition

1 & 2 PartCondensation

Solvent(s)Acetone

IsopropanolXylene N-butanol

AcetoneIsopropanolXylene N-butanol

EthanolMethanol

Mineral Spirit

EthylAcetatetoluene

Methanol

Surface PreparationAll surfaces to be bonded should first be thoroughly cleaned. A cloth or industrial tissue saturated with naphtha or methyl ethyl ketone (MEK) may be used to remove dirt, oil or greasefrom non-plastic surfaces. Isopropanol is a commonly used solvent for preparation of plastic surfaces to avoid crazing of the substrate. When practical, surfaces should be wiped dry before applying the primer coating. Abrasion of the surface will also often improve adhesion.

When solvents are used as described, proper safety precautions must be observed.

Priming ProcedurePrimers may be applied by brushing, wiping or dipping. (Spraying may sometimes produce erratic results.) A thin uniform primer coating of approximately 0.01 to 0.02 mm (0.5mil) thickness usually provides the strongest bond. Care should be taken with plastic substrates such as polystyrene or polycarbonates (LEXAN®) which may tend to craze or become sticky when primer is applied. Crazing can be minimized if the primer is applied with a single, continuous stroke.

For most primers, a drying time of at least 30 minutes at room temperature is suggested prior to application of the RTV silicone rubber adhesive sealant. On porous surfaces, a second coat of primer may be required. Allow at least 30 minutes drying time between coats.

SS4179 primer must be allowed to air dry for at least 15 minutes at room temperature before applying the RTV silicone rubber adhesive sealant.

For all of these silicone primers sufficient humidity must be available for proper drying. A minimum of 25% relative humidity is suggested for all but SS4155 primer for which a minimum of 40% is suggested. Formation of a chalky white haze indicates adequate drying of the S4155 primer. Do not remove or contaminate such film prior to application of the RTV silicone rubber compound.

Primers may be left to dry for up to 24 hours before application of the sealant without loss of bonding effects. However, the primed surface must be covered to prevent dirt or contaminant pick-up.


Adhesion to Various Substrates: 1 Part Condensation Cure

27

Copper

Steel

Mild Steel

Brass

Stainless Steel

Aluminum

Corrosion Resistant Aluminum

Galvanized Steel

Tin

Acrylic Resin

Phenol Resin

Epoxy Resin

Polycarbonate

Soft Polyvinyl Chloride

Rigid Polyvinyl Chloride

Polyester Film

Unsaturated Polyester

Polyamide

Nylon 66

PBT

PPS

ABS Plastic

Polypropylene

Polyethylene

Fluorocarbon Resin

Silicone Resin Laminate

Silicone Resin Gl ass Cloth

Chloroprene Rubber

Nitrile Rubber

Styrene Butadiene Rubber

Ethylene Propylene Rubber

Silicone

Glass

Mortar

ALC

Ceramic

Cedar

Cypress

Lauan

: Adheres completely: Adheres, but separates from the surface when pulled : Does not adhere

*1: YP9341*2: Cracking may occur under some usage conditions.

TSE392 (Alkoxy)Silicone Rubber

Primer

Substrate

Met

als

*2

*1

*1

*3

*3

*3: XP80-A5363

Primerless ME121 ME123 XP80-A5363YP9341

*2

*1

*1

GE Bayer Silicones


Plas

ticRu

bber

Inor

gani

cW

ood

Technical Information

Adhesion: Addition Cure

28

Shear Adhesion of TSE322:Method:JIS K 6850Adhesive Surface Area:10 X 25mmAdhesive Thickness:1mm

SubstrateShear Adhesive

StrengthMPa {kgf/cm2}

Rate of CohesiveFailure

%

Aluminum (JIS H 4000) 2.5 {25} 100

Copper (JIS H 3100) 1.7 {17} 100

Brass 2.1 {21} 100

Stainless Steel 1.9 {19} 100

Nickel Plating 2.2 {22} 100

Solder Plate 2.0 {20} 100

PPS 2.1 {21} 100

PBT 1.5 {15} 100

Epoxy Resin 1.7 {17} 100

Polyester 1.6 {16} 100

Bakelite 2.5 {25}

TSE322 shear adhesive strength in relation to oil resistance

Test ConditionsAdhesiveStrength

MPa {kgf/cm2}Failure

%

Initial Measurement 2.0 {20} 100

Engine Oil (SAE20) 130°C, 200h 1.6 {16} 100

Substrate: Ceramic

2 4 5

htgnertS cir tc el ei

Dm

m /Vk

Elapsed Time h

25

20

10

1 30

Dielectric Strength and Cure Time

TSE392

Dielectric Strength Test Method

Equipment: Dielectric voltage gauge for grease

Voltage Rise: 1kV/s

Terminal Gap: 1mm (JIS C 2110)

Measurement Time: 5 hours after application

1mm

12.5mmsealant

Point Interference

Test Method: 1ml and 5ml of sealant was applied to an airtight container turned with a micrometer. Time required to come to a complete stop was measured.

TSE392

Motor Operation Time (60°C)

1ml

100 200 300 400 500 1000 2000 3000 4000

5ml

1ml5ml

TSE3925Low Volatile

505204

35001241

Low Volatility Effect on Motor Terminals

Oil Resistance: Addition Cure

100

Chemical ResistanceElectrical PropertiesChemical Volume Change

Concentrated Hydrochloric Acid

Hydrochloric Acid (3%)

Concentrated Sulphuric Acid Decomposition

Sulphuric Acid (10%)

Concentrated Nitric Acid

Nitric Acid (7%)

Glacial Acetic Acid

Acetic Acid

Hydrofluoric Acid Decompositon

Citric Acid

Phosphoric Acid

Concentrated Ammonia

Ammonia (10%)

Potassium Hydroxide (20%)

Sodium Hydroxide (1%)



Sodium Chloride (10%)

Sodium Carbonate (2%)

Sodium Carbonate (20%)

Hydrogen Peroxide (3%)

ASTM No.1 Oil (150°C, 70h)

ASTM No.3 Oil (150°C, 70h)

Mineral Oil

Castor Oil

Flax Seed Oil

Silicone Oil (35°C, 70h)

Acetone

Butyl Alcohol

Ethyl Alcohol

Gasoline

Mineral Spirit

Toluene

Water (room temperature)

Boiling Water (70h):<10%, : 10-25%, : 25-75%, : >75%

Test Method: Volume change of cured liquid silicone rubber afterimmersing 1week at 25°C

Acid

Alka

liIn

orga

nic

Salin

eSo

lutio

nO

ilSo

lven

tW

ater

Electrical Properties during Cure


Heat Resistance: 1 Part Condensation Cure

29

Change in Physical Properties with Heat Exposure

1h 10h 100h15min 30min

%

Elapsed Time h

1mm thickness5mm thickness

10mm thickness1mm thickness5mm thickness

10mm thickness

100

233

2

1

0

TSE392 Weight Change During Cure

1d 2d 3d 7d5h

oC

oC

4

Heat Resistance: Addition Cure

Test Method: Hardness and adhesive strength are measured using a test sample that has been returned to room temperature after being exposed to heat for a specified period of time.

100

200

300

400

4321Storage Time months

y tiso cs iVaP

TSE322 Viscosity and Storage Temperature

5 6

5

25 oC

oC

Storage StabilityStoring under low temperature conditions is extremelyimportant, particularly for one-part addition cure RTVs.High temperature storage may increase viscosity.

Precautions for UseStore in a cool, dry place, and avoid exposure to direct sunlight. Please store one-part products below 10°C to prevent a rise in viscosity. Return to room temperature before opening toavoid condensation.Curing of one-part products below 100°C requires time, and adhesive strength may not fully develop. If the substratecan withstand heat exposure, heat should be applied at temperatures over 100°C. Please consider the substrate’scapacity to withstand heat and allow for adequate heat exposure time.Adequate ventilation should be maintained in the workplace at all times.Avoid prolonged contact of uncured material to skin as this may cause irritation.Surfaces containing water, sulphur, nitrogen compounds, organic metal compounds, or phosphate compounds mayinhibit curing. A sample patch test should always be conducted before proceeding. (Particular care is required forapplications involving organic rubber, flux, amin cured epoxy resin, waxes, and condensation cure silicone rubber.)Keep out of reach of children.

Elapsed Time h

ssendraH

)A epyT(

100

80

60

20

0

40

5.0

4.0

3.0

2.0

1.0

0200 400 600 800 1000

250

htgnertS noiseh d

A a

PM

TSE326 Hardness

250

TSE326 Adhesion

oC

oC

200 400 600 800 1000

GE Bayer Silicones


Elapsed Time days

504030

100

20

-10

4020 0

-10-20

20 0-20

-60-80

-40

7 14 30 90 180 360

20150200

TSE392 (Alkoxy)oCoCoC

Har

dnes

s ch

ange

%Ad

hesi

on c

hang

e %

Elon

gatio

n ch

ange

%

Dispensing Equipment

30

Tube Type

Cartridge Type

Pail Type Drum Type

Cartridge Type

GE Bayer Silicones

Americas

GE SiliconesWorldwide HQ:Waterford, NY• R&D• Application development• Basic manufacturing• Finishing • Corporate R&D

(Schenectady, NY)

Europe

GE Bayer SiliconesJV 50,1 % GE : 49.9 % BayerEuropean HQ: Leverkusen, Germany• R&D• Application development• Basic manufacturing• Finishing

Asia/Pacific

GE Toshiba SiliconesJV 51 % GE : 49.% ToshibaAsian HQ: Ohta, Japan• R&D• Application development

Basic manufacturing

• Finishing

50.1 % GE, 49.9 % Bayer in Europe, Middle East, Africa, India

800 peopleHeadquartered in Leverkusen, Germany

Major locationsLeverkusen (Monomer, Intermediates, Finishing)

Bergen op Zoom , NL (Sealants Finishing) & European Logistics Center

Lostock , UK (HTV Rubber Compounding Center)

Bangalore , India (Sealants Packging, Rubber Compounding , Fluids Finishing)

•

•

•

•

••

•

•

31

©2005 General Electric Company. All rights reserved.

March 2005Version 1 SB/fk

The materials, products and services of GE Advanced Materials, Silicones and its parent, subsidiaries and affiliates (“Supplier”) are sold subject to the Supplier’s Standard Terms and Conditions of Sale which are available upon request. Although the information, recommendations or advice contained herein is given in good faith, supplier makes no warranty or guarantee, express or implied, (i) that the results described herein will be obtained under end-use conditions, or (ii) as to the effectiveness or safety of any design incorporating supplier’s materials, products, services, recommendations or advice. Each user bears full responsibility for making its own determination as to the suitability of Supplier’s materials, products, services, recommenda-tions or advice for its own particular purpose. Because actual use of products by the user is beyond the control of Supplier, such use is within the exclusive responsibility of the user, and Supplier cannot be held responsible for any loss incurred through incorrect or faulty use of its products. Further, no statement contained herein concerning a possible or suggested use of any material, product, service or design is intended or should be construed to grant any license under any patent or other intellectual property right of Supplier or any of its subsidiaries or affiliated companies, or as a recommendation for the use of such material, product, service or design in the infringement of any patent or other intellectual property right. Nothing in this or any other document shall alter, vary, supersede or operate as a waiver of any of the Supplier’s Standard Terms and Conditions of Sale.

Principal Locations

Regional Information Phone Fax

North AmericaWorld Headquarters187 Danbury RoadWilton, CT 06897, USA 800.295.2392 607.754.7517

Latin AmericaAv. Nove de Julho, 5229 7º andar01407-907 São Paulo SP, Brazil + 55.11.3067.8671 + 55.11.3067.8680

Europe, Africa and Middle EastGE Bayer Silicones GmbHBuilding V7D-51368 Leverkusen Germany + 49.214.30.1 + 49.214.30.31924

PacificGE Toshiba Silicones6-2-31 RoppongiMinato-kuTokyo 106-8550 Japan + 81.3.3479.5361 + 81.3.3479.5391

Customer Service Centers

North America Specialty FluidsSouth Charleston, WV 25303, USA 800.523.5862 304.746.1654E-mail: [email protected] UA, Silanes, Resins, and Specialties 800.334.4674 304.746.1623 RTV Products-Elastomers 800.332.3390 304.746.1623

Sealants and Adhesives and Construction

877.943.7325 304.746.1654

Canada Within U.S. & Canada 800.363.0496 + 450.974.0380St-Eustache, Quebec Outside U.S. & Canada + 450.974.0899

Latin AmericaArgentina and Chile + 54.23.2055.2857 + 54.23.2055.2811Brazil + 55.11.3067.8671 + 55.11.3067.8680Mexico and Central America + 52.55.5257.6042 + 52.55.5257.6094Venezuela, Ecuador, Peru, Colombia, and Caribbean + 58.21.2902.5167 + 58.21.2902.5158E-mail: [email protected]

Europe, Africa and Middle EastGE Bayer Silicones GmbH 800.4321.1000 + 31.164.293156GE Specialty Materials (Suisse) Sarl + 41.22.989.2111 + 41.22.989.2393E-mail: [email protected]

PacificJapan +81.276.20.6182E-mail: [email protected] + 86.800.820.0202Korea +82.2.530.6400Singapore + 65.6326.3918

Worldwide Hotline 800.295.2392 + 607.786.8131 + 607.754.7517

ge advanced materials silicones rtv silicone rubber

Documents