gb explosives notified body, health & safety laboratory ... dec 201… · ec type examination...

ENB09 – Issue 5 – 17/12/99 of 2

GB Explosives Notified Body, Health & Safety Laboratory, Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom Tel: +44 (0)1298 218150 Fax: +44 (0)1298 218180 Email: [email protected] www.hsl.gov.uk

EC TYPE EXAMINATION CERTIFICATE

NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/D/080/003 Issue 1 1. Product Type: Detonator. 2. Product Name: PROGRAMMABLE ELECTRONIC DELAY DETONATORS as

listed in Annex 1 to this certificate. 3. Manufacturer's Name: DELTA CAPS OMNIA Division, Republic of South Africa. 4. Applicant's Name: DELTA CAPS OMNIA Division, Republic of South Africa. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 5 September 2003

ENB09 – Issue 5 – 17/12/99 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/D/080/003 Issue 1 DELTADET II



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/D/123/009 Issue 4 1. Product Type: Detonator. 2. Product Name: SDI ELECTRONIC IGNITION MODULE as listed in

Annex 1 to this certificate. 3. Manufacturer's Name and Address: Special Devices Incorporated, USA. 4. Applicant's Name and Address: Special Devices Incorporated, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr P Shelley Director, GB Explosives Notified Body 2 December 2009

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/D/123/009 Issue 4 SDI Electronic Ignition Module (SDI EIM) and the components of the SDI Electronic Initiation System listed below. *Dan-Mar DLG1600-1-N Digital Logger, *Dan-Mar DLG1600-100 Digital Logger, *Dan-Mar DBM1600-2-KN Digital Blasting Machine, *Dan-Mar LM-1 Current Leakage Meter. *Manufactured by Dan-Mar Company Inc, 10319 Wikel Road, Huron, Ohio 44839, USA.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/084/004 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: STYPHNIC ACID as listed in Annex 1 to this certificate. 3. Manufacturer's Name: BAE Systems, United Kingdom. 4. Applicant's Name: BAE Systems, United Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 16 June 2004

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/084/004 Issue 1 STYPHNIC ACID, SPECIAL and RECRYSTALLIZED.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

GB Explosives Notified Body, Health & Safety Laboratory, Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom

Tel: +44 (0)1298 218150 Fax: +44 (0)1298 218180 Email: [email protected] www.hsl.gov.uk


NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/094/04 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: BULK EMULSION EXPLOSIVES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name and Address: Moura Silva & Filhos S.A., Portugal. 4. Applicant's Name and Address: Moura Silva & Filhos S.A., Portugal. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Head, GB Explosives Notified Body 7 October 2004

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/094/04 Issue 1 GEMUGRANEL



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/039/002 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: SHAPED CHARGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Owen Oil Tools LP, USA. 4. Applicant's Name: Owen Oil Tools LP, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 1 October 2003

ENB09 – Issue 5 – 17/12/99 Page 1 of 4

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/039/002 Issue 2 See table below

ENB09 – Issue 5 – 17/12/99 Page 2 of 4

PART NUMBER PRODUCT DESIGNATION

021-1562-204 1 9/16”, RTG PLUS,TAL, DP, 3250F

021-1562-280 1 9/16”, RTG PLUS, CML, BH, 3250F

021-2000-204 2”, RTG PLUS, TAL, DP, 3250F

021-2000-280 2”, RTG PLUS, CML, BH 3250F

021-2500-204 2 1/2”, RTG PLUS, TAL, DP, 3250F

021-2500-280 2 1/2”, RTG PLUS, CML, BH, 3250F

022-3125-092 3 1/8”, XII-GM, HSC, PML, BH, 3250F

022-3125-102 3 1/8”, X-GM, HSC, TAL, DP, 3250F

022-3125-102C 3 1/8”, X-GM, HSC, Type C, DP, 3250F

022-3125-110 3 1/8”, XVI-GM, HSC, PML, DP, 3250F

022-3125-116 3 1/8”, XII-GM, HSC, TAL, DP, 3250F

022-3125-118 3 1/8”, XII-GM, HSC, APT, DP, 3250F

022-3375-121 3 3/8”, XVI-GM, HSC, TAL, DP, 3250F

022-4000-102 4”, XIX-GM, HSC, TAL, DP, 3250F

022-4000-102C 4”, XIX-GM, HSC, Type C, DP, 3250F

022-4000-124 4”, XXIII-GM, HSC, CML, BH, 3250F

022-4000-142 4”, XVI-GM, HSC, PML, DP, 3250F

022-4000-177 4”, XXIII-GM, HSC, TAL, DP, 3250F

022-4000-177C 4”, XXIII-GM, HSC, Type C, DP, 3250F

022-5000-102 5”, XXIII-GM, HSC, PML, DP, 3250F

022-5000-109 5”, XXXII-GM, HSC, TAL, DP, 3250F

022-5000-110 5”, XXXII-GM, HSC, CML, BH, 3250F

022-5000-112 5”, XXXII-GM, HSC, CML, BH, 3250F

022-2750-102 2 3/4”, 6 SPF, ECG, TAL, DP, 3250F

022-3750-402 2 3/4”, ECG, APT, 3250F 022-3375-506 22.7 GM, ECG, DP, 3250F

022-3375-308 22.7 GM, ECG, APT, DP, 3250F

022-4500-210 19 GM, ECG, TAL, DP, 3250F

022-3375-361 3 3/8”, 4 SPF, ECG, TAL, DP, 3250F

022-3375-502 3 3/8”, 6 SPF, ECG, TAL, DP, 3250F

022-3375-300 3 3/8”, 22.7 GM, ECG, DP, 3250F

022-3375-506 22.7 GM, ECG, DP, 3250F

022-4500-210 19 GM, ECG, TAL, DP, 3250F

022-4510-536 4 1/2”, 22.7 GM, ECG, DP, 3250F

022-5000-311 32 GM, ECG, TAL, DP, 3250F

022-4000-500 34 GM, ECG, TAL, DP, 3250F

022-4000-346 26 GM, ECG, TAL, DP, 3250F

022-4500-557 4”, 8 SPF, ECG, TAL, DP, 3250F

ENB09 – Issue 5 – 17/12/99 Page 3 of 4

022-7000-500 4”, ECG, APT, 3250F

022-5000-241 5”, ECG, DP, 3250F

022-5000-319 5”, 36 GM, ECG, DP, 3250F

022-5000-300 5”, 34 GM, ECG, DP, 3250F

022-6000-506 6”, 12 SPF, ECG, TAL, DP, 3250F

022-7000-505 7”, 12 SPF, ECG, TAL, DP, 3250F

022-2750-106 2 3/4”, 6 SPF, ECG, CML, BH, 3250F

022-3375-370 3 3/8”, 22.7 GM, ECG, BH, 3250F

022-3375-397 3 3/8”, 6 SPF, ECG, CML, BH, 3250F

022-5000-326 5”, 32 GM, ECG, BH, 3250F

022-4500-561 26 GM, ECG, CML, BH, 3250F

022-6000-515 6”, 12 SPF, ECG, CML, BH, 3250F

022-7000-510 7”, 12 SPF, ECG, CML, BH, 3250F

022-3375-308 22.7 GM, ECG, APT, DP, 3250F

022-5000-376 19 GM, ECG, CML, BH, 3250F

022-2500-283 3 1/8”, SLICKWALL, BH, 3250F Shaped Charges Made by GOEX International for Baker-Atlas

022-2875-202 Baker-Atlas Part Number H06-77507-00








ENB09 – Issue 5 – 17/12/99 Page 4 of 4



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/055/003 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: RDX ENCAPSULATED SHAPED CHARGES as listed in Annex

1 to this certificate. 3. Manufacturer's Name: Owen Oil Tools LP, USA. 4. Applicant's Name: Owen Oil Tools LP, USA. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 1 October 2003

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/055/003 Issue 2 1 11/16” Innovator, TAL, Strip, 300 0F, Part No. 020-1687-800SS 1 11/16” Innovator, TAL, Strip, 300 0F, Part No. 020-1687-800HP 1 11/16” Innovator, TAL, Wire/Link, 300 0F, Part No. 020-1687-804 1 11/16” Innovator, TAL, Link, 300 0F, Part No. 020-1687-870 2 1/8” Innovator, TAL, Strip, 300 0F, Part No. 020-2125-800 2 1/8” Innovator, TAL, Wire/Link, 300 0F, Part No. 020-2125-804 2 1/8” Innovator, TAL, Link, 300 0F, Part No. 020-2125-870

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/132/007 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: PACKAGED EMULSION EXPLOSIVES as listed in Annex 1 to

this certificate. 3. Manufacturer's Name: Premier Georgia Ltd., Georgia. 4. Applicant's Name: Premier Georgia Ltd., Georgia. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 1 November 2007

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/132/007 Issue 1 Dynex-C

ENB09 – Issue 5 – 17/12/99 Page 2 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/071/003 Issue 1 1. Product Type: High (Blasting) Explosive. 2. Product Name: BLADE CUTTING CHARGES as listed in Annex 1 to this

certificate. 3. Manufacturer's Name: Royal Ordnance plc, United Kingdom. 4. Applicant's Name: Royal Ordnance plc, United Kingdom. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 9 May 2003

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/071/003 Issue 1 ECT63 g/m BLADE100 BLADE240 BLADE450 BLADE650 BLADE1150

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/B/028/04 Issue 2 1. Product Type: High (Blasting) Explosive. 2. Product Name: OIL WELL CARTRIDGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: The Ensign-Bickford Aerospace

and Defense Company 4. Applicant's Name and Address: The Ensign-Bickford Aerospace and Defense Company 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Head, GB Explosives Notified Body 15 October 2004

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/B/028/04 Issue 2 Oil Well Cartridge, HMX Bi-Directional, “Super” Booster Oil Well Cartridge, RDX Bi-Directional, “Super” Booster, Schlumberger Part Number H448841.

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/C/038/04 Issue 2 1. Product Type: Detonating Cord. 2. Product Name: PRIMACLAD METAL-CLAD DETONATING CORDS as

listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: The Ensign-Bickford Aerospace

and Defense Company. 4. Applicant's Name and Address: The Ensign-Bickford Aerospace and Defense Company. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Head, GB Explosives Notified Body 15 October 2004

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/C/038/04 Issue 2 87 Grain HNS Lead Round Detonating Cord, Stock No. A942002, Schlumberger Part Number H429816 40 Grain HNS Lead Ribbon Detonating Cord, Stock No. A943002, Schlumberger Part Number H304114 35 Grain HMX Lead Ribbon Detonating Cord, Stock No. A944002 40 Grain RDX Lead Ribbon Detonating Cord, Stock No. A941003, Schlumberger Part Number H106960



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/P/113/11 Issue 3 1. Product Type: Propellant. 2. Product Name: ROCKRACKER ROCK-BREAKING CARTRIDGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: RockTek USA Ltd. 4. Applicant's Name: RockTek USA Ltd. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Mr SJ Myatt Director, GB Explosives Notified Body 17 January 2011

ENB09 – Issue 5 – 17/12/99 Page 1 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/P/113/11 Issue 3 RocKracker Cartridges without an Ignition Aid RocKracker 27/10 S RocKracker 27/10 E RocKracker 27/30 S RocKracker 27/30 E RocKracker 27/60 S RocKracker 27/60 E RocKracker 42/60 S RocKracker 42/60 E RocKracker 42/100 S RocKracker 42/100 E RocKracker 60/100 S RocKracker 60/100 E RocKracker 60/200 S RocKracker 60/200 E RocKracker 60/300 S RocKracker 60/300 E RocKracker Cartridges with an Ignition Aid RocKracker 27.5/20(E) RocKracker 27.5/20(S) RocKracker 27.5/40(E) RocKracker 27.5/40(S) RocKracker 27.5/100(E) RocKracker 27.5/100(S) RocKracker 27.5/100(B) no igniter RocKracker 42/100(E) RocKracker 42/100(S) RocKracker 42/200(E) RocKracker 42/200(S) RocKracker 60/300(E) RocKracker 60/300(S) RocKracker 60/500(E) RocKracker 60/500(S) Notes Type E is fitted with an electric igniter. Type S is fitted with a shock tube igniter.

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ENB09 – Issue 5 – 17/12/99 Page 1 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/P/136/007 Issue 1 1. Product Type: Propellant. 2. Product Name: E-GUN CARTRIDGES as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Accurate Energetic Systems for Baker Atlas. 4. Applicant's Name: Accurate Energetic Systems. 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 29 November 2007

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/P/136/007 Issue 1 E-Gun Cartridge Family F199250-709 F039920-000 Cartridge Assembly E-Gun 3 1/4" F039555-000 Cartridge Assembly E-Gun 4.0" F138855-000 Cartridge Assembly E-Gun 3 1/4”, 1/4” Bullet E-Gun Powder Load Family F199250-710 F131631-009 Cartridge Powder Load Assembly E-Gun 9.0 Grams F131631-011 Cartridge Powder Load Assembly E-Gun 11.0 Grams F131631-014 Cartridge Powder Load Assembly E-Gun 14.0 Grams

ENB09 – Issue 5 – 17/12/99 Page 1 of 2




NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/P/011/06 Issue 4 1. Product Type: Propellant. 2. Product Name: VIHTAVUORI SINGLE AND DOUBLE BASE SMOKELESS POWDERS as listed in Annex 1 to this certificate. 3. Manufacturer's Name and Address: EURENCO Vihtavuori Oy, FI-41330 Vihtavuori, Finland. 4. Applicant's Name and Address: EURENCO Vihtavuori Oy, FI-41330 Vihtavuori, Finland. 5. Attachments to this Certificate: Annex 1: products covered by this certificate; Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Head, GB Explosives Notified Body 4 January 2006

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/P/011/06 Issue 4 N100- Series Single Base Smokeless Powders N105 N110 also known as R910 when sold by Dynamit Nobel GmbH1 N120 N125 N130 N132 N133 N160 N134 N161 N135 N165 N140 N170 N150 24N41 N151 20N29 N300- Series and 3N- Series Single Base Smokeless Powders N310 N322 N342 N32C N312 N324 N344 N315 N325 N347 N316 N326 N350 N317 N328 N360 N318 N330 3N17 N319 N331 3N36 N320 N338 3N37 N321 N340 3N38 N500- Series Double Base Smokeless Powders N525 N530 N540 N550 N560 N570 Notes

1. Dynamit Nobel GmbH, Explosivstoff- und Systemtechnik, Umweltschutz / Genehmigungen, Standort Stadeln, Kronacher Str. 63, D-90765 Fürth, Germany.

ENB09 – Issue 5 – 17/12/99 Page 1 of 2



NOTIFIED BODY NO: 0519 CERTIFICATE NO: ENB/P/092/004 Issue 1 1. Product Type: Propellant. 2. Product Name: GASGUN as listed in Annex 1 to this certificate. 3. Manufacturer's Name: Integral Engineering Inc 4. Applicant's Name: Integral Engineering Inc 5. Attachments to this Certificate: Annex 1: products covered by this certificate. Being a notified body in accordance with the GB Statutory Instrument No 2714 (1993) and Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses, the Explosives Notified Body certifies that the above type of product has been examined using Module B of the system for attesting conformity and has been found to conform with the manufacturer's specifications for the type and with the relevant requirements of the Statutory Instrument and the Directive. Dr R K Wharton Director, GB Explosives Notified Body 29 June 2004

ENB09 – Issue 5 – 17/12/99 Page 2 of 2

ANNEX 1 TO EC TYPE EXAMINATION CERTIFICATE ENB/P/092/004 Issue 1 GasGun Propellant Stimulation Tool (rubber canister), length 2 ft; GasGun Propellant Stimulation Tool (rubber canister), length 4 ft; GasGun Propellant Stimulation Tool (rubber canister), length 6 ft; GasGun Propellant Stimulation Tool (rubber canister), length 8 ft; GasGun Propellant Stimulation Tool (rubber canister), length 10 ft.

gb explosives notified body, health & safety laboratory ... dec 201… · ec type examination...

Documents