gas compressors - rix · pdf file · 2015-10-05o i l - f r e e o r o i l - l u b r...

2
OIL-FREE OR OIL-LUBRICATED GAS COMPRESSORS FOR RELIABLE CONTINOUS DUTY SERVICE RIX INDUSTRIES STANDARD AND CUSTOM- DESIGNED COMPRESSORS FEATURE: Single or Multi- Stage Compression Low Piston Speeds Continuous Duty Water Cooling Crosshead Construction Pressure-Lube Crankcase Smooth, Quiet Operation Compact, Easy to Maintain Design RIX 2M SERIES RIX 2M1BG-400 Booster RIX INDUSTRIES 4900 Industrial W ay Benicia, CA 94510 USA 707-747-5900 Phone 707-747-9200 Fax www.rixindustries.com ISO 9001 CERTIFIED I N D USTR I ES Piston Rings and Packings: RIX offers a wide selection of self-lubricating piston ring and packing materials. Products from various reputable manufacturers are available depending on the application. Piston Rods: Stainless steel or Tungsten carbide coated. Valves: Stainless steel plate type are used in most applications. PACKAGING Units are available partially or fully packaged to RIX standard configurations or to customer specifications. Electric motors are coupled via heavy duty V-belt drives. Customer defined accessories are routinely incorp- orated into RIX packages, and the units are fully factory tested at design pressures and flow. SPECIFICATIONS Horsepower Range: to 250 BHP Pressure Range: to 7500 PSIG (500 Bar) Displacement: RIX 2M compressors feature heavy-duty crosshead construction with two vertical cylinders and full water cooling. The guide cylinders and distance piece are cast into the crankcase for strength and rigidity. CONSTRUCTION Crankcase: Pressure lubricated with shaft-mounted oil pump and full flow oil filter. Auxiliary pump as required. Bearings: Tapered roller with sleeve type center main and connecting rod bearings. Bronze wrist pin bushings. Cylinders: Cast iron, or machined steel for higher pressures. Stainless liners available where required. Cooling: Efficient water cooling through large passageways in heads, cylinders, gas packings and guide cylinders. up to 1200 CFM (1 Stage) up to 700 CFM (2-3 Stage) up to 350 CFM (4 Stage) Cylinders: 1 to 4 Stages Diameters to 14 Single or double-acting Stroke: 6 inches (152 mm) Speed: 200 – 650 RPM Typical Gases: Oxygen, Hydrogen, Nitrogen, Argon, Helium, Natural Gas, Dry Air

Upload: phungmien

Post on 13-Mar-2018

217 views

Category:

Documents


2 download

TRANSCRIPT

O I L - F R E E O R O I L - L U B R I C AT E D

GAS COMPRESSORSF O R R E L I A B L E C O N T I N O U S D U T Y S E RV I C E

RIX INDUSTRIESSTANDARD AND CUSTOM-DESIGNEDCOMPRESSORSFEATURE:

Single or Multi-Stage Compression

Low Piston Speeds

Continuous Duty

Water Cooling

CrossheadConstruction

Pressure-LubeCrankcase

Smooth, QuietOperation

Compact, Easy toMaintain Design

R I X 2M S E R I E S

RIX 2M1BG-400 Booster

RIX INDUSTRIES4900 Industrial WayBenicia, CA 94510 USA707-747-5900 Phone707-747-9200 Faxwww.rixindustries.com

ISO 9001 CERTIFIED

I N D U S T R I E S

Piston Rings and Packings:RIX offers a wide selection of self-lubricating piston ringand packing materials.Products from variousreputable manufacturers areavailable depending onthe application.

Piston Rods: Stainless steel orTungsten carbide coated.

Valves: Stainless steel plate typeare used in most applications.

PACKAGINGUnits are available partially or fully packaged to RIX standard configurations or to customerspecifications. Electric motors are coupled via heavy duty V-belt drives. Customer definedaccessories are routinely incorp-orated into RIX packages, and theunits are fully factory tested atdesign pressures and flow.

S P E C I F I C A T I O N SHorsepower Range:

to 250 BHP

Pressure Range: to 7500 PSIG (500 Bar)

Displacement:

RIX 2M compressors featureheavy-duty crosshead constructionwith two vertical cylinders and full water cooling. The guidecylinders and distance piece are cast into the crankcase for strength and rigidity.

CONSTRUCTIONCrankcase: Pressure lubricatedwith shaft-mounted oilpump and full flow oil filter.Auxiliary pump as required.

Bearings: Tapered roller withsleeve type center mainand connecting rod bearings.Bronze wrist pin bushings.

Cylinders: Cast iron, ormachined steel for higherpressures. Stainless linersavailable where required.

Cooling: Efficient water cooling through large passageways inheads, cylinders, gas packingsand guide cylinders.

up to 1200 CFM (1 Stage)up to 700 CFM (2-3 Stage)up to 350 CFM (4 Stage)

Cylinders:1 to 4 Stages

Diameters to 14 Single or double-acting

Stroke:6 inches (152 mm)

Speed:200 – 650 RPM

Typical Gases:Oxygen, Hydrogen,

Nitrogen, Argon, Helium,Natural Gas, Dry Air

180 120

2M2 2M3

9022

GT-2M/09

R I X 2M S E R I E S