gas cleaning technology - paul wurthbrochures.paulwurth.com/iron/technologies/brochures/...annular...
TRANSCRIPT
-
Gas Cleaning Technology
Environmental Technologies
-
High-effi ciency Gas Cleaning Systems are vital for the reliable operation and long campaign life of high temperature hot blast systems and steam generation facilities, and allow the opera-tors to meet the relevant pollution control standards.
Thanks to the expertise of Paul Wurth Umwelttechnik GmbH, the Group’s competence centre for the development of envi-ronmental protection technologies for the metals industry, we design and supply the full range of gas cleaning systems, gas distribution equipment and processes designed to the high-est levels of cleaning effi ciency, safety and reliability as well as providing the best possible environmental protection.
Dry Dust Separation Technology
In the fi eld of dry dust separation, the Paul Wurth solution can be based on the following technologies:
Dustcatcher
Tangential Cyclone
Axial Cyclone
The axial cyclone technology, successfully introduced by Paul Wurth for the dry separation in blast furnace top gas cleaning, shows how operational and economic aspects can be perfectly combined. The high separation effi ciency of up to 90 % helps to minimise the operational cost and to optimise the residue handling downstream of the plants.
Variable design:
With or without inlet isolation valve
Wear lining to guarantee long service life
Dust discharge system
We propose individual and fl exible concepts, which are perfectly adapted to the customer’s environmental, economic and operational requirements:
EPC (Engineering, procurement & construction) contracts, on a turn-key basis
Supply of single equipment items
Revamping concepts for existing plants
Concepts allowing a variable plant layout
Salzgitter Flachstahl
Stahlwerke Bremen
Axial cyclone
Gas Cleaning Technology
-
Wet Separation Technology
In the fi eld of wet gas cleaning techniques, the Paul Wurth Annular Gap Scrubber is the state-of-the-art technology for blast furnace gas cleaning and top pressure control. It is designed as a two-stage scrubbing unit in one single vessel. A demister installed downstream guarantees a minimal droplet content at the outlet.
Pre-Scrubber stage
Cooling and pre-cleaning of the gas
Variable solution against corrosion and dust deposits
AGE-Scrubber stage
Top pressure control with annular gap elements
Fine cleaning of gas below 5 mg/m3 i.N.
Gritzko® valve
Annular Gap Scrubber and Demister
Paul Wurth spray nozzle
Thanks to the Paul Wurth Gritzko® valve, the dust discharge system offers new advantages:
Very precise control of discharge fl ow rate
Better sealing tightness due to infl atable seals
Less wear and longer life due to hard faced protection
Annular Gap Element
Wear protected surface for long service life
Maintenance-free operation due to improved stuffi ng box design
Droplet separation
External swirl-type vertical or inclined demister
Free droplet content of clean gas below 5 g/m3 i.N.
-
Primary Converter Dedusting with Paul Wurth Annular Gap Scrubber
Converter dedusting
Annular Gap Element for converter dedusting
Pressure control for converter dedusting
Given the high accuracy of pres-sure control and the effi ciency of gas cleaning, annular gap elements can also be implemented for other tasks, i.e. for primary converter dedusting.
Relying on an excellent knowledge of the process, combined with operational expertise, the energy consumption can be decreased with accurate air factor control and the clean gas dust content at the fl are stack reduced to less than 50 mg/m3 i.N.
The high fl exibility of the equipment design helps to fi t into existing structures in the frame of revamping projects as well as into new plants.
Gas Cleaning Technology
-
Energy & Cost-saving Technologies
Energy recovery by using top gas recovery tur-bines (TRT) is the most proven technology for blast furnace plants. Integrated solutions can be easily realized and included into the process.
If the blast furnace gas cleaning plant is additionally equipped with bag fi lter technology, the energy output of the TRT is also increased by approx. 15-20 %. Individual solutions for high temperature applications are possible.
Bearing in mind the present and future ecological challenges and further energy and cost-saving re-quirements, our efforts in the fi eld of industrial gas cleaning will focus on combining existing solutions and new technologies. One of our future projects will concentrate on the carbon dioxide (CO2) capture by using scrubber and regeneration technology.
We keep on fi nding the best solution!
For a further increased energy recovery, blast furnace gas preheating can be added. The energy output can be increased by 75 % by using excess gases or exhaust gases from neighbouring plants.
Blast furnace gas pre-heating
Top gas recovery turbine
Bag fi lter for dry blast furnace gas cleaning
-
Paul Wurth S.A.32, rue d’AlsaceL-1122 LuxembourgPhone: (+352) [email protected]
Group members:
EUROPE
Paul Wurth Italia S.p.A.Genova, ITALYPhone: (+39) 010 640 [email protected]
Paul WurthRefractory & Engineering GmbHMainz-Kastel, GERMANYPhone: (+49) 6134 606 [email protected]
Paul Wurth Umwelttechnik GmbHEssen, GERMANYPhone: (+49) 201 [email protected]
Paul Wurth, a.s.Ostrava, CZECH REPUBLICPhone: (+420) 595 155 [email protected]
Paul WurthMoscow Representation Offi ceMoscow, RUSSIAPhone: (+7) 495 721 [email protected]
Paul Wurth KovrovKovrov, Vladimir region, RUSSIAPhone: (+7) 49232 [email protected]
Paul WurthUkraine Representation Offi ceMariupol, UKRAINEPhone: (+380) 629 41 18 [email protected]
Paul Wurth International Site ServicesLuxembourg, LUXEMBOURGPhone: (+352) 4970 [email protected]
CTI Systems S.A.Lentzweiler, LUXEMBOURGPhone: (+352) 2685 [email protected] • www.ctisystems.com
Joint company ofDango & Dienenthal and Paul Wurth:
TMT - Tapping Measuring TechnologySiegen, GERMANYPhone: (+49) 271 4014 0
Luxembourg, LUXEMBOURGPhone: (+352) 261920 [email protected] • www.tmt.com
AMERICAS
Paul Wurth Inc.Valparaiso, Indiana, USAPhone: (+1) 219 756 [email protected]
Paul Wurth do BrasilBelo Horizonte, M.G., BRAZILPhone: (+55) 31 3228 [email protected]
Paul Wurth de Chile LtdaProvidencia, Santiago, CHILEPhone: (+56) 2 470 [email protected]
Paul Wurth de Mexico SA de CVAtizapan, MEXICOPhone: (+52) 55 1106 [email protected]
ASIA
Paul Wurth Metal Technology(Beijing) Co., LtdBeijing, P.R. CHINAPhone: (+86) 10 8405 [email protected]
Beijing Paul Wurth Trading Co., LtdBeijing, P.R. CHINAPhone: (+86) 10 8405 [email protected]
Paul Wurth India Pvt. LtdGurgaon, INDIAPhone: (+91) 124 [email protected]
Paul Wurth International S.A.Taiwan BranchKaohsiung, TAIWANPhone: (+886) 7 33 93 [email protected]
Paul Wurth International S.A.Korea BranchSeoul, KOREAPhone: (+82) 2 553 [email protected]
Paul Wurth Vietnam Co., LtdHo Chi Minh City, VIETNAMPhone: (+84) 8 73 000 [email protected]
Joint company ofIHI Corporation and Paul Wurth:
PAUL WURTH IHI Co., Ltd.Tokyo, JAPANPhone: (+81) 3 6204 [email protected]
AFRICA
Paul Wurth International S.A.South Africa BranchJohannesburg, SOUTH AFRICAPhone: (+27) 11 794 [email protected]
VCA**CERT
IF
IED SAFETY SYSTEM
VINCOTTE
ISO 9001ISO 14001
BUREAU VERITASCertification
N° BXL 05000141 / N° BEL BXL 153669
The Paul Wurth Group is today one of the world leaders in the design and supply of complete plants, systems and processes as well as specialised mechanical equipment for
the iron & steel industry: Blast Furnaces & Auxiliary PlantsCoke Making PlantsAgglomeration Plants Direct Reduction PlantsEnvironmental Protection, Recycling & Energy-Saving Technologies
other industries:Systems & Equipment for Non-Ferrous Pyrometallurgy, Electrometallurgy & Residue TreatmentIntralogistics Solutions for Heavy LoadsEngineering & Project Management for Civil Construction and Infrastructure Projects
Feasibility Studies – Conceptual, Basic and Detail Engineering – Project Management – Plant and Components Supply – Turnkey Projects – Assistance in Plant Assembly and Commissioning – Technology and Operations Consultancy – On-site and Remote Operational Assistance – After-sales Services
Engineering & Technology worldwide
© Copyright 2013 Paul Wurth S.A. – all rights reserved
Non Contractual Data: Paul Wurth believes that the data contained in this folder are correct and accurate, but cannot guarantee same or better performances for any specific site without a detailed quote. Patents and Patents pending. — Paul Wurth equipment and processes are protected in many countries by patents.
Paul Wurth, the Paul Wurth Logo and Gritzko are trademarks of Paul Wurth S.A. and may be registered in your jurisdiction.