gantry truck and car wash machine cambus net 2 one cambus-net2-one_12.2017... · cambus wi-fi...
TRANSCRIPT
Cambus
Stainless steel electrical
board box
New electrical board
Standard configuration
Inverter on gantry movement
FULL configuration
Inverter on:
Gantry movement
Right vertical brush movement
Left vertical brush movement
Up/down horizontal brush
Updated programs setting•Selection of the water to be used during the wash cycle
•Selection of the vehicle type to be washed
•Selection of the functions to activate or deactivate during the wash cycle
Exemple•Deactivation detection of the pedestrian mirror wash program
•Deactivation brushing on the rear part of the vehicle
•Deactivate horizontal brush on the front of the vehicle
• Wash cycle managementUpdate of the personalization of the different functions settings
Update of management of the winter discharge and set-up
• Activation of the washing speed increase on the sides of the vehicleWhen a threshold valuechanges, the control resets automatically in standard
configuration.
Manual controls to simplify the setting/ regulation operations and
maintenance.
• Password personalized by the user
• Registration of the alarms.
To interact with the gantry in a DYNAMIC and INTUITIVE way.
Operator board Touch screen
Cambus
Cambus
Wi-Fi connection
Connection, on the car wash machine site, by the use a Wi-
Fi router
It is possible to visualise with proper license, on
smartphone or tablet with operating system (android/ios2),
the operator panel of the machine
.All the controls and functions on the XBT operator panel
are active on smartphone and tablets.
Cambus
Configuration of
water collector
with CHEMICAL
PREWASH option
Configuration
STANDARD water
collector
STANDARDProducts pneumatic
dosing pumps
OPTION
Products electrical
dosing pumps
NET 2
Stinless steel AISI 304 outfitting for
the version :
“ NET 2 ”
“ FLY 2 “
•Components of the machine in stainless steel for a maximum durability along the time out
Internal parts of the
construction
Equipment basis
Vertical brushes
Movement beam
Trolley plates and components
Top drying
Top blower
Plates of support
InverterTowing
Up/down
CONTOUR drying
PLC M340CAN – Open technology
1 st Gantry
Drying / High pressure
2 nd Gantry
Washing
InverterTowing
Up/down Horizontal brush
Right vertical brush movement
Left veritical brish movement
PLC M340CAN – Open technology
NEW CONFIGURATION
ELECTRICAL BOARD
NET 2
1 st GantryLeft upper part
NET 2
2 nd GantryLeft upper part
Water system
High Pressure
A
E3
E4
S-D
M2
MF
AL
2B
2R
2R
2Sa
2Sb
NET 2Ethernet Connection
Remote connection by secomea modem
The data modem sends the following information:
•Equipment during discharge
•Equipment in block
•Equipment restarted
•Temperature
By email sending, possibility to configure up to 5 email
addresses through the XBT).
It is possible to visualise, with the proper license, the
equipment operator panel on smartphone or tablet with
operating system (android/ios2).
It is NOT possible to make from remotely the following
controls:
•Restart
•Reset
•Start of washing cycle
When this connection is active those controls are disabled
both on the operator panel and on the connected device.
MODEM Operator panel
Tablet
Wi-Fi connection
Connection, on the car wash machine site, by the use a Wi-
Fi router
It is possible to visualise with proper license, on
smartphone or tablet with operating system (android/ios2),
the operator panel of the machine
.All the controls and functions on the XBT operator panel
are active on smartphone and tablets.
NET 2
NET 2
CONTOUR top high pressure
MOTORIZED TILTING
DISCOVER
Proper piston pump
of 7,5 kW
MOTORIZED OSCILLATING
SIDE high pressure
• DOUBLE piston oump (7.5 kW + 7.5 kW 60 liter/min 60 bar)
A pump feeds in one passage:
• CONTOUR top high pressure, positioned on the top dryer blower with
front/back tilting system
in a second passage
• SIDE high pressure
•The second pump feeds the DISCOVER system
HIGH PRESSURE
Management with:
• single piston pump 15 kW 100 liter/mint80 bar
Supply of side and top high pressure in TWO gantry
separated passages
“ POWER HP ”CONTOUR top high pressure
With percussion nozzels
CONTOUR top chemical prewash arch
NET 2
ONEComponenents in stainless steel
Front door
Side cladding
towing
Support in
stainless steelNEW FIXING
Beam and trolley plates
vertical brushes
CONTOUR
Blower dryer
SIDE dryer
blower
Wheel
washer
support
ONESIDE DRYER UPDATE
The side dryer blowers are no longer anchored directly on the side upper part of the gantry in a fix position
but by the use of spacers, in order to allow the passage of the air during the aspiration and to position its
to a variable height according to the washing height.
Direct fixing on
equipment side upper
part
Fixing through spacers
ONE
Solenoid valve group
Regulators of
Dosing pumps
Right side partPLC M340
Ethernet connectionLeft side part
PLC EXPANSION
In external board
Ethernet connection
ONESIDE HIGH PRESSURE
Piston pump for
high pressure50 let/min - 50 bar - 5.5kW
Inside the gantry(Right side of the gantry)
Side high pressure
Integrated in the
wheelwasher
Side High pressure
ONE
Loading dimensions H. 28
For the loading, if the machine will
be loaded with a space required of
3080 mm, the machine will be
shipped all assembled with the
upper part included
For the loading, if the machine will be loaded with
a space required of 2580 mm, you must dismantle,
beside the horizontal brush guides and the top
dryer, also the side dryer blowers
Horizontal brush guide
Top dryer guide
Side dryer blowers
Loading dimensions H. 25
For the loading, if the machine will
be loaded with a space required of
2850 mm, the machine will be
shipped all assembled with the
upper part included
For the loading, if the machine will be loaded with
a space required of 2580 mm, you must dismantle,
beside the horizontal brush guides and the top
dryer, also the side dryer blowers
Horizontal brush guide
Top dryer guide
Side dryer blowers
ONE
ONE
Loading dimensions H. 23
For the loading, if the machine will
be loaded with a space required of
3100 mm, the machine will be
shipped all assembled with the
upper part included
For the loading, if the machine will
be loaded with a space required of
2580 mm, the machine will be
shipped all assembled with the
upper part included