Spare Parts ListServo joint Frong-wheel height

adjustment block 4pcs A servoorientation-poles

C-gasket A C-gasket B

2 gaskets

Spare gasketsand nuts

4゜ left andright bear

2pcs "Z" bracket

Sping control block

B servoorientation-poles

rear-wheel heightadjust block 4pcs

connecting rod

place adjust A place adjust B

2 rear-wheelregulator

2 sphericitydrawbars

2 half balldrawbars 3 spare block front motherboard

4.8mm ball 1pcs

5.8mm ball 2pcs

M3 hexagon nuts 2pcs

M3X16 screw 2pcs

M3X22 screw 8pcs

M3X8 screw 4pcs

M3X8 sink screw 10pcs

M3X15 bolt 3pcs

M2.6X10 screw 2pcs spare rope 2pcs

front shaft A 1pcs

front shaft B 1pcs

"L" wrench 1pcs

metal wrench 1pcs

replace the part can adjustthe rear-wheel spacing

Model CarOperation Manual

Name:Model CarNo.:G768Manufacturer:Dongguan BDS Technology limitedAddress:3nd Liuhua Industrial District,Dongcheng District,Dongguan City,Guangdong Province,China

Product Parts Skeleton Drawwing

3.1 gasket 2pcs

Sewo assemble and adjust sketch map

Status fun days sener

1 You can choose different plastic parts atA or B place If you need.

.2 While use the different drivers you mustchoose the comfortable plastic parts at theC place

. ,

.

In choosing a right hole at the bottom ofthe car can coad the drivers reverse.

To drill a dia 2 8mm hole.

Notice procecding of assemble and adjust

Using a comfortable rope to fix battery

Installing different adjustment block to adjustthe height of the front wheel

With wrench clockwise or counter clock wiserotation adjustment nut can adjust thet i g h t n e s s d i f f e r e n t i a l y e a r s

,.

Installing a 4 obliquity rockerarm to adjustthe angle of the front wheel

,.

Installing height adjustment block to adjust

the height of the rear axle. Meson by adjusting the four different locationscan adjust the angle of different front

spongeassembly

assembly the tyres when youfirst load the sponge,if the

you can use glue sticktight them.

assembly the adjustment block toadjuslt the intensity of buffer spring

5.8mm ball 2pcs

M3 nut 2pcs

3.1 gasket 2pcs

M3X16 screw 2pcs

M3X8 sink screw 2pcs

The servo will is resupinate with theB serve orientation-pole,and haveappropriate angle

adjust the D or E,can adjust left andright front wheel's angle

4 ~6° °

2 ~3° °

0°

looseness

wrench tightenadjust the screwcan change thegear's placing.

tyres and wheels are wobble,