g-series systemsproductimageserver.com/literature/quickguide/32637qg.pdfscroll pause/resume color...
TRANSCRIPT
QuickReferenceGuide
G-SeriesSystems
GSeriesOpGuide.book Page 1 Tuesday, November 27, 2007 11:00 AM
2
Raymarine G-Series System
Quick Reference Guide
Document number: 86133-1
Date: November 2007
Trademarks and registered trademarks
Autohelm, HSB, Raymarine, RayTech, Sail Pilot, SeaTalk and Sportpilot are registered trademarks of Raymarine Limited.
Apelco is a registered trademark of Raymarine Holdings Limited (Registered in all major marketing territories).
AST, Autoadapt, Auto GST, Autoseastate, Autotrim, Bidata, Marine Intelligence, Maxiview, On Board, Raychart, Raynav, Ray-
pilot, Raystar, ST40, ST60, Seaclutter, Smart Route, Tridata and Waypoint Navigation are trademarks of Raymarine Limited.
Maptech is a registered trademark of Maptech.
All other product names mentioned are trademarks or registered trademarks (if applicable) of their respective companies.
© Raymarine plc 2007
GSeriesOpGuide.book Page 2 Tuesday, November 27, 2007 11:00 AM
SOFTKEY
Softkey 1
Softkey 2
Menu or pop-up screen
Softkey 3
Menu or pop-up screen
Softkey 1
Softkey 2
Softkey 1
Softkey 2
1
2
3
1
2
3
4
4
About this book
The Quick Reference guide summarises toolbars and menus available in the
G-Series system. The guide gives you an at-a-glance view of features
available and how you access them.
For more details, refer to the G-Series Reference Guide.
How to to read the toolbar diagrams
The toolbar diagrams show you all the options and features available under
the default toolbar for an active window. Some toolbars are split into two or
three diagrams.
A softkey press on the default toolbar in an active window is represented by a
colored highlight over the appropriate label. All the options available under
that softkey are shown. Only active softkeys are represented on the
diagrams. Read the diagrams downwards.
A keypress on the default toolbar is shown
by a highlight matching the on-screen label.
Subsequent softkey options, reading from
softkey 1 to softkey 5 down the page. Blanks
are ignored.
Menu or pop-up screens are represented
with a small square.
Toolbars can slope left or right, with softkey 1
at the top and softkey 5 at the bottom.
3
GSeriesOpGuide.book Page 3 Tuesday, November 27, 2007 11:00 AM
4
Power button
• Press power button once to open the power control toolbar.
• Press power button twice to switch off all radars even if the monitor is in
standby.
• Use softkeys to toggle radar operation states.
• Change monitor color palettes and control monitor power.
Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
Palette options
OSD Menu
Monitor power
RADAR 1TX STBY
RADAR 2TX STBY
MONITORCONTROLS
RADAR 1ON OFF
RADAR 2ON OFF
PWR
GSeriesOpGuide.book Page 4 Tuesday, November 27, 2007 11:00 AM
Advance waypoint
Stop goto
Restart XTE
Place waypoint
Goto waypoint
Waypoints (WPTS) &
Man Overboard (MOB)
• Press once to open the waypoints toolbar. Press again to place a
waypoint at your current position.
• Press and hold to place a man overboard marker. Press and hold again to
remove the MOB marker.
• Select waypoints to navigate to using Goto Waypoint Options toolbar.
Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
WAYPOINT ATCURSOR
WAYPOINT ATVESSEL
WAYPOINT ATLAT/LON
GOTO WAYPOINTOPTIONS
REVIEW AND EDITWAYPOINTS
WPTSMOB
5
GSeriesOpGuide.book Page 5 Tuesday, November 27, 2007 11:00 AM
Waypoints (WPTS) &
Man Overboard (MOB)Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
6
• Organize your waypoints.
• Access waypoint group options on the Review and Edit Routes toolbar.
Set up default symbol/group
Edit default
Sort list
Set default symbol and group
Waypoint groups
View and edit details
Erase waypoints
Move between groups
Rename group
Make new group
Erase groups
Edit group name
WAYPOINT ATCURSOR
WAYPOINT ATVESSEL
WAYPOINT ATLAT/LON
GOTO WAYPOINTOPTIONS
REVIEW AND EDITWAYPOINTS
WPTSMOB
GSeriesOpGuide.book Page 6 Tuesday, November 27, 2007 11:00 AM
Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
7
Page and data sets
• Select a page to view and change.
• Switch between active windows.
• Open application and system setup menus.
• Access data functions and views.
Select Page Set
Toggle active windows
Open application or system setup menus
Press once
Press
and hold
PAGE 1 PAGE 2 PAGE 3 PAGE 4 PAGE 5
RULERCHART
VECTORSARCHIVE AND
TRANSFERDATABAR
ON COMP OFF
PAGE
PAGE
ACTIVE
MENU
DATA
GSeriesOpGuide.book Page 7 Tuesday, November 27, 2007 11:00 AM
Setup menus Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
8
Current application Setup menu options
Chart Chart Setup
Cartography Setup
Radar Radar Setup
Fishfinder Fishfinder Setup
Engine monitor, Data, CDI Panel Setup Menu
3D Chart 3D Chart Setup Menu
Weather Weather Setup Menu
Video Video Setup Menu
GPS Status
Compass Setup
AIS Layer Setup
System Setup
Alarms Setup
Display Setup
Databar Setup
Select Page Set
System Diagnostics
Remove CF Card
All
• Access configuration menus for the application open in the active window.
• Open system-wide setup menus.
• Access setup menus and controls for optional external equipment.
DATA
GSeriesOpGuide.book Page 8 Tuesday, November 27, 2007 11:00 AM
9
FIND GOTO ROUTES TRACKS PRESENTATION
Goto cursor
Follow route options
Route list
Follow route
Reverse and follow
Goto waypoint options
Waypoint list
Sort list
Goto waypoint
Quick navigation
• Place a ' quick' waypoint to navigate to.
• Open waypoint and route lists.
• Access follow and goto functions.
Active
window
CHART
GSeriesOpGuide.book Page 9 Tuesday, November 27, 2007 11:00 AM
10
FIND GOTO ROUTES
Follow route options
Build new route
TRACKS PRESENTATION
Show/hide routes
Review and edit routes
Sort waypoint list
Insert waypoint
Use cursor
Make route
Place waypoint
Follow from here
Move waypoint
Save route
Goto waypoint
View and
edit details
Place waypoint
Use waypoint list
Use waypoint list
Save route
Follow (quick) route
Sort list by
Build a new route
• Use the route-building functions: place waypoints and open the waypoint list.
Active
window
CHART
GSeriesOpGuide.book Page 10 Tuesday, November 27, 2007 11:00 AM
11
Active
window
CHART
FIND GOTO ROUTES
Follow route options
Build new route
TRACKS PRESENTATION
Show/hide routes
Review and edit routes
Route list
Route on chart show/hide
Waypoint index on/offSort list by
Follow route
Reverse and follow
Show and follow routes
• Select which routes are displayed.
• Select routes to follow.
• Open the route list.
GSeriesOpGuide.book Page 11 Tuesday, November 27, 2007 11:00 AM
12
Active
window
CHART
Follow route options
Build new route
Show/hide routes
Review and edit routes
Route list
Place waypoint
Erase route
Amend route course
Route details
Edit name and color Route name
Edit color
Edit route
Time ETA/hours
SOG actual/planned
Set SOG
Review and edit routes
• Make changes to routes.
• View estimated time of arrival for a route.
FIND GOTO ROUTES TRACKS PRESENTATION
GSeriesOpGuide.book Page 12 Tuesday, November 27, 2007 11:00 AM
13
Active
window
CHART
Create route from track
Start track
Review and edit tracks
Show/hide tracks
Track list
Track list
Track listStop track
Discard track
Save track
Cancel stop command
Track starts
Track your journey
• Trace your current journey and save it as a track or route.
• To change the time or distance interval for track-points, open the Chart
Setup Menu.
FIND GOTO ROUTES TRACKS PRESENTATION
GSeriesOpGuide.book Page 13 Tuesday, November 27, 2007 11:00 AM
14
Active
window
CHART
FIND GOTO ROUTES
Chart view local/system
Declutter on/off
Chart layers
Chart mode and orientation
TRACKS PRESENTATION
Show/hide waypoints
Show waypoints
Show by sym/group
Aerial overlay
Radar overlay
Chart type
Chart symbology
AIS
Range rings
3D locator
On chart show/hide
Waypoint name
on/off
Find
Chart sync
Orientation
Motion mode
Vessel off set
View options
• Customize the data shown in a chart window.
• Customize how the chart is displayed.
GSeriesOpGuide.book Page 14 Tuesday, November 27, 2007 11:00 AM
15
Active
window
CHART
Chart Setup >
Cartography Setup > Chart Display
Chart Grid
Chart setup
• Make changes to chart and cartography preferences.
Chart Text
Chart Boundaries
Spot Soundings
Safety Contour
Depth Contour
Hide Rocks
Object Information
Vector Length
Vector Width
Record Vessel Track By
Track Interval
Datum
Chart Offset
About...
Navigation Marks
Navigation Marks Symbols
Light Sectors
Caution and Routing Data
Marine Features
Land Features
Colored Seabed Areas
Background Color
Business Services
Aerial Photo Overlay
Roads
Additional Wrecks
MENU
GSeriesOpGuide.book Page 15 Tuesday, November 27, 2007 11:00 AM
16
FIND SHIP GOTOADJUST ON
EYE CENTERADJUST
ROTATE PITCH
Route list
Waypoint list
PRESENTATION
Follow route options
Goto waypoint options
3D Navigation options Active
window
3D CHART
• Open the route or waypoint list while in a 3D chart window.
GSeriesOpGuide.book Page 16 Tuesday, November 27, 2007 11:00 AM
17
Chart layers
3D view options
View to forward/starboard/aft/port
Trans cone on/off
Depth scale on/off
Adjust exaggeration
Waypoint name on/off
Depth overlay on/off
Depth plane value
Waypoint name on/off
FIND SHIP GOTOADJUST ON
EYE CENTERADJUST
ROTATE PITCHPRESENTATION
3D presentation options
• Select view options.
Active
window
3D CHART
GSeriesOpGuide.book Page 17 Tuesday, November 27, 2007 11:00 AM
18
Active
window
3D CHART
3D Chart Setup > Center of View Indicator
Vessel Symbol
Vessel Size
Aerial Photo Overlay
Chart Text
Navigation Marks
3D chart setup
MENU
• Make changes to 3D chart preferences.
GSeriesOpGuide.book Page 18 Tuesday, November 27, 2007 11:00 AM
19
ADJUST P1SINGLE
PRESET 2DUAL
PRESET 3SHALLOW
PRESET 4DEEP
Gain
Power Auto/Man
PRESENTATION
VRM
View F1/F2/Both
Scroll pause/resumeScroll pause/resume
Color gain auto/manual
Gain mode auto/manual (low, medium, high)
TVG auto/manual
Color threshold
VRM range
VRM on/off
VRM depth
View F1/F2/Both
• Tune the fishfinder image.
• Customize views.
• Measure range and depth with VRM.
Active
window
FISHFINDER
FishfinderTuning the image (gain)
GSeriesOpGuide.book Page 19 Tuesday, November 27, 2007 11:00 AM
20
Adjust F1 / F2
Select option
Zoom full/split
Full/split
1/2/3
Range (rotary)
Bottom shift (rotary)
Zoom factor x2/3/4, custom (R)
Zoom position auto/manual
Zoom
Bottom lock
A-Scope
ADJUST P1SINGLE
PRESET 2DUAL
PRESET 3SHALLOW
PRESET 4DEEP PRESENTATION
Fishfinder display modes Active
window
FISHFINDER
• Select a frequency to view.
• Adjust display settings for selected preset.
• Select frequency for display mode adjustments.
GSeriesOpGuide.book Page 20 Tuesday, November 27, 2007 11:00 AM
21
Active
window
FISHFINDER
Range auto/manual
Range shift
Dual range
Select frequency high/low
RANGE
OUT
IN
• Alter range settings.
• Select frequency for range adjustment.
Fishfinder range settings
GSeriesOpGuide.book Page 21 Tuesday, November 27, 2007 11:00 AM
22
Active
window
FISHFINDER
Fishfinder Setup > Configure Preset Frequencies
Depth digit size
Depth Digit Position
Target Depth ID
Depth Lines
White Line
Bottom Fill
Color Palette
Manual Scroll Speed
Transducer Settings > Select Transducer
Select Speed Transducer
Frequency Calibration
Depth Offset (Waterline)
Speed Offset
Temperature Offset
DSM Settings > DSM Reset
Trip Counter Reset
Sonar Interference Rejection
2nd Echo Interference Rejection
Ping Rate Limit (per sec)
Ping Enable
Fishfinder setup
MENU
• Make changes to fishfinder preferences. Option availability depends upon
which DSM is installed (DSM300 or DSM 400).
GSeriesOpGuide.book Page 22 Tuesday, November 27, 2007 11:00 AM
23
VRM/EBLTARGET
TRACKINGGAIN
Adjust VRM
Adjust EBL
Adjust Float
Center
Floating EBL
Setup VRM/EBL 2
VRM/EBLon/off
ENHANCEECHOES
PRESENTATION
Radar: VRM & EBL
• Measure distance and bearing.
Active
window
RADAR
GSeriesOpGuide.book Page 23 Tuesday, November 27, 2007 11:00 AM
24
Acquire target
Monitor in zones
MARPA & AIS options
Zone 1 on/off
Setup zone 1
Zone 2 on/off
Setup zone 2
Options window
MARPA list window
Cancel all targets
Cancel target
MARPA list
Radar: track objects Active
window
RADAR
VRM/EBLTARGET
TRACKINGGAIN
ENHANCEECHOES
PRESENTATION
• Track targets using guard zones, MARPA and AIS.
GSeriesOpGuide.book Page 24 Tuesday, November 27, 2007 11:00 AM
25
Active
window
RADAR
Threshold auto/man
Super HD controls
Adjust harbour mode
Rain on/off
Coastal mode
Sea auto/man Offshore mode
Gain auto/man
Buoy mode
Power boost auto/manual
Antenna boost auto/manual
Tune the radar image
• Select the preset gain mode that best suits your location.
• Alter the sensitivity of radar reception to improve the image.
VRM/EBLTARGET
TRACKINGGAIN
ENHANCEECHOES
PRESENTATION
GSeriesOpGuide.book Page 25 Tuesday, November 27, 2007 11:00 AM
26
Active
window
RADAR
Expansion on/off
Wakes on/off
Scan to scan
on/off
Interference rejection on/off
Enhance the radar image
VRM/EBLTARGET
TRACKING GAINENHANCEECHOES PRESENTATION
• Adjust the image to suit different conditions.
• Interference rejection: reduce interference from nearby radars.
• Expansion: enhance the return for small objects.
• Wakes: highlight moving targets.
• Scan to scan: reduce sea clutter.
GSeriesOpGuide.book Page 26 Tuesday, November 27, 2007 11:00 AM
27
Active
window
RADAR
Radar mode and orientation
Range rings on/off
AIS layer on/off
Show/hide waypoints
Show waypoints menu
Show by symbol/group
On radar show/hide
Waypoint name on/off
Vessel offset 0, 1/3, 2/3
Motion mode true (TM)/relative (RM)
Orientation heading-up/north-up/course-up
Dual range long/short
Presentation options
VRM/EBLTARGET
TRACKINGGAIN
ENHANCEECHOES
PRESENTATION
• Customize the data shown in a radar window.
• Customize how the radar image is displayed.
GSeriesOpGuide.book Page 27 Tuesday, November 27, 2007 11:00 AM
28
Active
window
RADAR
Radar Setup > Select Scanner
Scanner Setup Dual Range
Color Palette
EBL Reference Tune
Timed Transmit Sea Clutter Curve
Transmit Period Parking Offset
Standby Period Scanner Size
Bearing Alignment
Radar Advanced Setup
Radar setup
MENU
• Select which radar is displayed in active window.
• Access and change radar preferences.
>
GSeriesOpGuide.book Page 28 Tuesday, November 27, 2007 11:00 AM
29
VRM/EBL
Forecast win/wav/pres
PRESENTATION
Animate type forecast/n-rad
Animate on/off
Pause on/off
Weather graphics pop-up
Weather graphics Active
window
WEATHER
DISPLAYGRAPHICS
ANIMATEWEATHER
WEATHERREPORTS
• Open weather graphics and animation options.
GSeriesOpGuide.book Page 29 Tuesday, November 27, 2007 11:00 AM
30
FIND DISPLAY GRAPHICS ANIMATE WEATHER WEATHER REPORTS PRESENTATION
Weather reports pop-up
Forecast at cursor/ship
Tropical statements
Marine warnings
Marine zone forecasts
Watchbox
warnings
Watchbox
show/hide
Marine zone
show/hide
Weather reports
and setup menu
Weather Setup Menu > Sirius Weather User ID
Wind Symbol
Marine Watchbox Alerts
Active
window
WEATHER
MENU
GSeriesOpGuide.book Page 30 Tuesday, November 27, 2007 11:00 AM
31
Video setup
Video Setup Menu > Setup Video Cycle
Setup Softkey Shortcuts
Configure Video System
Reset GVM <list>
Data panel setup
DATA • ENGINE MONITOR • CDI
Configure <application>
Number of Engines
Maximum Tachometer Range
Number of Gensets
Active
window
Active
window
VIDEO
MENU
MENU Panel Setup Menu >
GSeriesOpGuide.book Page 31 Tuesday, November 27, 2007 11:00 AM
32
>System Setup Position Mode
TD Setup
Simulator
Bearing Mode
MOB Data Type
Variation Source
Manual Variation
Language
Extended Character Set
Ground Trip Reset
Settings Reset
Settings and Data Reset
Date/Time Setup
Units Setup
System Integration
Waypoint Password Setup
System Configuration
System setup
MENU
Active
window
ANY
• Make changes to system-wide preferences.
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
GSeriesOpGuide.book Page 32 Tuesday, November 27, 2007 11:00 AM
33
Alarms Setup > System Alarms Setup > Anchor Alarm; Anchor Alarm Radius
Timer; Timer Period
Alarm Clock; Alarm Clock Time
Temperature Alarm
Lower Temp Limit; Upper Temp Limit
Navigation Alarms Setup Arrival Alarm Radius>
Offtrack Alarm
Offtrack Alarm XTE
Guard Zones Sensitivity
Fishfinder Alarms Setup
Radar Alarms Setup
Fish Alarm>
>
Fish Alarm Sensitivity
Fish Alarm Depth Limit
Shallow Fish Limit
Deep Fish Limit
Shallow Depth Alarm
Shallow Depth Alarm Value
Deep Depth Alarm
Deep Depth Alarm Value
AIS Alarms Setup > Dangerous Targets
AIS Alarms List
MENU
Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
Alarms setup
• Configure G-Series alarm behaviour.
GSeriesOpGuide.book Page 33 Tuesday, November 27, 2007 11:00 AM
34
Active
window
ANY
9WXYZ
8TUV
7PQRS
4GHI
5JKL
6MNO
ACTIVE
WPTSMOB
DATA
MENUPAGE
. 0
2ABC
3DEF
1
CANCELSTANDBYDODGE PILOT OK
RANGE
OUT
IN
ENTER
>Display Setup Softkey Autohide
Softkey Color Bar
Cursor Autohide
Font Size
Resolution and Rate
>Databar Setup Position
Top Databar Size
Compass Bar Mode
Configure
Select Page Set > <select set>
>System Diagnostics External Interfaces
Internal Interfaces
Software Services
Remove CF Card<
Display settings &
system diagnostics
MENU
GSeriesOpGuide.book Page 34 Tuesday, November 27, 2007 11:00 AM
GSeriesOpGuide.book Page 35 Tuesday, November 27, 2007 11:00 AM
Raymarine plcAnchorage Park, Portsmouth,Hampshire, PO3 5TD, UKTel: +44 (0) 23 9269 3611Fax: +44 (0) 23 9269 4642www.raymarine.com
Raymarine Inc.21 Manchester Street, Merrimack,New Hampshire 03054 USA,Tel: +1 603 881 5200Fax: +1 603 864 4756www.raymarine.com
GSeriesOpGuide.book Page 36 Tuesday, November 27, 2007 11:00 AM