fx65-fx80-fx105-fx135-fx180-fx240-fx280
TRANSCRIPT
FX range
65 - 80 – 105 - 135 - 180 – 240 - 280
High spin, freestanding washer extractors
Product Sales Guide
Version: 4.0
Cabinet
* optional stainless steel AISI 304
• Front panel: Gray - standard Stainless steel - option
• Top panel: Stainless steel
• Ornamental plate: Black painted
• Side panels: Gray - standard Stainless steel - option
Side panels
• Painted side panels
• Reinforcement in side panels for extra strenght: - U-profile: FX65/80/105 1x FX135/180/240/280 2x
Cross and bearing house
• Modular bearing house design
• Star shape cast steel out of 1 piece:
- Sandblasted and degreased
• Red painted
• 1+1 bearing on model FX65/80/105/240/280
1+2 bearing on model FX135/180
Advantage: Long life span & easy service
Bearing house construction
• Bearing house is mounted at back of the tub inside the frame shell
• Vibrations are optimally diverted to the suspension
Frame shell
Bearing house
Outer tub
Bearings
• High quality bearings SKF:
- Ball bearings
- Roller bearing (FX280)
Advantage: Easy to replace bearings
FX180 bearings
Drain
• Directly under the tub: - Low water consumption - No wasted chemicals
• Standard 3“ drain valves:
- Small objects are evacuated • 90°drain valve:
- Auto-rinsing effect behind the valve
• Easy service: - Access from the front of machine
• 2nd drain valve optional for water recuperation
Drain under tub
Option: - Drain pump for FX65 and FX80
Suspension
• Soft springs for high G-force
• Optimized balance:
- No anchoring required
• Easy installation
Frontal double suspension FX180/240/280
Frontal suspension FX65/80/105/135
Side suspension FX135/180
Side suspension FX240/280
Water inlets
• Standard 2 inlet valves
• Optional 3rd
• Standard cool down
• ¾“ inlet valves
• Easy to remove filter without having to remove the valve: service friendly
• FX280 is equiped with 2 high capacity water inlets (option for FX180-240)
Water inlets
High capacity water inlets
High capacity water inlets
FX180 Option
FX240 Option
FX280 Standard
V-belts
• 1 micro V-belt per machine
• FX65-80: V-belt with 6 ribs
• FX105-135: V-belt with 8 ribs
• FX180-280: V-belt with 10 ribs
• Belts are mechanically tensioned by bolt
Close up V-belts
V-belt on motor drive
Safety switch
• 1 safety switch positioned below the tub in the front
• Steel spring is activated during high unbalances
• Is positioned in the factory
• With extreme unbalances: - The machine will repeat maximum 10 times (is not changeable)
• Activated when unbalances occur during:
- Low spin - High spin
Note: During installation & service always check if the tilt switches are well positioned
Unbalance switch
Soap box
• 4 compartments on middle of the top - 2 for powder and 2 for liquid soap
• Scandinavian design • Ergonomical position:
- Front and center
• Easy service: - 4 compartments next to each other: No confusion
Soap box Lid of soap box
- Plastic top of soap box is fully flexible, thus preventing any damage during handling
• Anti-damage protection
Soap box
Soap box – connection to the tub
• Chemicals enter the tub between the back plate of the tub and the drum
• No agressive chemicals directly on the linen
• Soap mixer is a standard feature on the FX line
• Liquid soap pumps can be connected to the mixer
• Chemicals are diluted before entering the tub
• No hot water directly on the linen
Soap box - mixer
Mixer
Liquid soap connection
Easy-Soap®
• Standard for FX line
• Electrical board with connection to the liquid soap inlets is added
• Easy service: - Machine remains unopened
For fixation plastic box with PCB board and 8 LED please unscrew cover on rear bridge
• Up to 13 liquid soap pumps possible*, connected to the soap box by hose: - 2x Ø19mm - 3x Ø14,5mm - 8x Ø11,5mm
• Connected to liquid soap (inlets are parts of mixer)
• No hot water directly on the linen
• Holes of the liquid soaps inlets must be drilled through the detergent suppliers according to their requirements
Easy-Soap®
* Maximum 8 could be controled by the PCB board
FX65 FX80 FX105 FX135 FX180 FX240 FX280
Volume (l) 65 75 105 135 180 240 280
Capacity (kg) 7 8 11 14 18 24 28
(lbs) 15 18 25 30 40 55 65
Diameter (mm) 530 620 750
Depth (mm) 305 350 450 410 545 620
Perforation (mm) 3.5
Inner drum
• 3 lifting ribs for ideal mechanical action
• Stainless steel AISI 304
• Perforated ribs („PowerWash™“)
• New perforation („Cascade™“) Rib in inner drum
Inner drum - Cascade™
• Extraction over 400G* » not sticky linen to the drum
• More perforations » optimized water evacuation
• Less residual water » lower rest humidity
• Cascade shape of holes » better washing results
* FX280 has 350 G-factor
Motor
• Frequency controlled drive
• New motor:
- Higher torque
- High extraction speed
- Rubber housing Motor
FX65 FX80 FX105 FX135 FX180 FX240 FX280
Motor power (kW) 0,75 1,1 1,5 2,2 3
Wash speed (rpm) 49 42
Extraction speed (rpm) 1165 1075 980 915
G force dB(A) 400 350
Noise - wash dB(A) 52 55
Noise - extraction dB(A) 63 63,6 66,4 65
=> Lower noise
=> Less unbalances
Shafts
• High quality steel for Xtreme strength
• Oversized diameters
• Welded on the drum for long life span
Shaft (FX65-135) Shaft (FX180-280)
Frames - clinch technology
• New technology
• Not welded
• Stronger assembly of parts
• First time use on FX platform
Clinch technology - benefits
• Strength of the connections is same as by spot welding
• Connection does not rust
• Increasing productivity
• Shorter lead times
Outer tub
• High quality stainless steel
• Easy assembly of front panel
• Rubber seal with O cross section Outer tub (FX65-135)
Outer tub seal Outer tub seal Outer tub (FX180-280)
Door handle, door lock
• Ergonomic door knob for easy opening
• Scandinavian design
• Strong overdimensioned door lock for safety
Door knob
Door lock
Door handle, door lock
• Safety system to protect destroying of the handle during operation
- System (due to the possibility of slipping in both extreme positions) prevents accidental damage when using greater force
Door
• Xtreme big door openings
• Easy loading & unloading
• Opening to 180°
FX65 FX 80 FX 105 FX 135 FX 180 FX 240 FX 280
Door opening (mm) 330 410 460
Door material Aluminium (gray gloss)
Floor to door (mm) 349 342 477
Door – comparison*
FX65 FX 80 FX 105 FX 135 FX 180 FX 240 FX280
Door diameter (mm) 330 330 410 410 460 460 460
FX135:
Primus
Girbau
Electrolux Primus
Electrolux
Miele
FX65: FX180:
Primus
Girbau
Electrolux
Image
Electrolux 310 310 365 395 435 435 435
IPSO 300 300 300 400 400 400 400
Girbau - 322 - 327 426 400 -
UniMac - 300 300 - 400 400
Image - - - - 370 - 450
Miele 300 n/a 370 370 370 430 -
* according to available data
Miele
Primus
UniMac
Electrolux
FX280:
Image
Hinges
• Oversized hinges for long life span
• Integrated in the new design
Open door hinges Open door hinges
Hinges
Close up hinges
Control panel
• Slanted „nose“ shape
• Easy access to control board
• Top panel doesn´t have to be removed
• Safe for coin op version
Half open facia Open facia
Controls
XControl (standard):
• OPL / Vend • 15 pre-set programs • + 20 languages
XControl+ (option):
• OPL • 20 pre-set programs (up to 99) • + 20 languages • Numeric keypad • SmartLoad feature
XControl XControl+
7 + 2 hidden Number of buttons 21
Navigation horizontal
Navigation vertical
Select
Start
Stop
Cancel
Detail program information
Numeric keypad (0-9)
Extra functions selection
Delayed start
Servicing information
Controls - buttons
Guiding information
Navigation Select Cancel Start
Extra functions selection Hidden navigation buttons (for menu)
Graphical display - Anti-reflexive foil (sunshine) - Anti-vandal protection
• 7 buttons + 2 hidden
XControl
1. Program selection 2. Soap information
3. Price information 4. Run information
XControl
• Well-arranged screens for simple control
XControl
• Main features – Wash programs
• 15 free adaptable programs (5 in Coin version)
• Factory pre-programmed programs:
- 5x Intensive
- 4x Standard
- 4x Eco
- 2x Extraction
• Extra wash / drain steps:
- Spray - Static drain
- Cool down - Reverse drain
- Soak
• Possibility to update wash programs:
- Manually on machine
- Through USB memory stick
- With PC and TraceTech SW
XControl
• Main features – Wash process
• Consumption (water, energy) reduction by:
- Precise water level measurement (step 0,1 unit)
- Exact temperature measurement (step 0,1 °C)
• New spin sequence to reduce residual humidity
XControl
• Main features – TraceTech connection
• Washer management tool – TraceTech SW:
- Machine set-up
- Wash programs update
- Monitoring + alarms (e-mails, SMS)
- Traceability
- Location management
- Sales overview
- Reports, statistics
• Connection:
- Wired RS485
- Wireless WiFi
XControl
• Main features – Other
• Extra functions: Prewash, Soak, No spin, Gentle wash, Delay start
• Texts can be shown in 23 languages
• 8 liquid soap signals (7 signals with Central payment system)
• Ready for connecting water recycling kit
• Buzzer signal to inform about significant events (end of cycle, error,...)
• Simple firmware update through USB memory stick
Detail program information
Navigation Select Cancel Start
Stop
Navigation
Graphical display - Anti-reflexive foil (sunshine) - Anti-vandal protection
Numeric keypad
• 21 buttons
XControl+
XControl+
• Additional features
• Up to 99 programs
• Factory pre-programmed settings:
- 5x Intensive
- 4x Standard
- 4x Eco
- 2x Extraction
- 5x Special (Sport, Mops, Jeans,..)
• - Semi-automatic weighing
Coin operated
• Electronical or mechanical coin meter
• Large integrated coin box
• Central payment as an alternative
Coin box
Coin box facia panel
Inside the machine: (standard) Back side of the machine: (option)
• Connection inside of the machine (standard) or on rear panel (option)
• Export programmes from the machine
• Import* programmes to the machine
• Copy of the machine settings from machine (machine parametres)
• Import machine settings and programmes to the machine (created in TraceTech)
• Simple firmware update
USB
* You can copy and import programmes just from the same model of washer – for example from FX80 just to FX80
Programmes
No. Name Temp. °C Description Prewash Rinses
1 Hot wash - Intensive 90 Normally to heavily soiled laundry. Good temperature for white and light coloured
cotton, such as bed linen Yes 3
2 Warm wash - Intensive 60 Normally soiled laundry. Good for clothes worn next to skin Yes 3
3 Color wash - Intensive 40 Normally soiled laundry, whites and colors Yes 3
4 Bright - Intensive 30 For delicate blended materials and permanent press cotton. Suitable for shirts and
blouses No 3
5 Woolens 15 A gentle laundry program for wool, silk and garments that should be washed by
hand. Short spin No 3
6 Hot wash - Standard 90 Normally to heavy soiled laundry with less water consumption No 3
7 Warm wash - Standard 60 Normally soiled laundry with less consumption No 3
8 Color - Standard 40 Normally soiled laundry, whites and colors. With less water consumption No 3
9 Bright - Standard 30 For delicate blended materials and permanent press cotton. Suitable for shirts and
blouses. With less water consumption No 3
10 Eco hot 90 Ecology program for normal to heavy soiled laundry No 2
11 Eco warm 60 Ecology program for normal soiled laundry No 2
12 Eco color 40 Ecology program for normal soiled laundry, whites and colors No 2
13 Eco bright 30 Ecology program for delicate blended materials and pernament press cotton.
Suitable for shirts and blouses No 2
14 Low spin - Extraction Suitable for laundry that just needs to be dampened No 1
15 High spin - Extraction Suitable for laundry that just needs to be dampened No 1
16-20 Special (only ) Special programmes for sport garments, jeans, mops, etc
Washing results
FS7 FX80
Wash water (l) 30,2 23,4
Total water (l) 68,73 49,7
Energy (kWh) 1,88 1,31
Time (min) 0:38:20 0:52:38
Rest humidity (%) 63,8 47,7
Comparison of washing results - program No.11 (60°C Eco) - A gentle laundry program for wool, silk and garments that should be washed by hand
* Tested in Primus lab according to the international norm EN60456
Difference
- 22,52%
- 27,69%
- 30,32%
+ 37,12%
- 25,24%
Seal
• 3 radial seals FKM
• 1 hardened sleeve
• Long life span
• Easy service:
- Quick replacement time
Seals
Detail of seal
Safety
• FX machines correspond to all CE and EMC directives, WRAS approval
• Noise level below 65 dB
• Standard: Emergency button (none on coin and CPS machines)
• One mainswitch
• Buzzer signal at end of cycle
Emergency button Main switch
FX65 FX80 FX105 FX135 FX180 FX240 FX280
kW 6 / 9 (4,6) 6 / 9 (4,6) 6 / 9 / 12 9 / 12 12 / 18 18 22
Heating - electrical
• Positioned in front of the machine • Easy access for quick service • Short wash cycles
Heating element (FX65-135)
Heating elements in the front
Heating element (FX180-280)
Heating - steam
• Direct steam
• 1-8 bars
• Positioned in the back
• Combination with electrical heating is possible
• Switch between steam and electrical heating is on the back panel
Steam injector Steam opening
Voltages
Phase Voltage (V)
Frequency (Hz)
Heating (kW)
1 200-240 50/60 0
3 200-240 50/60 6 / 9 / 12
3 380-415+N 50/60 6 / 9 / 12
3 380-415 50/60 0 / 6 / 9 / 12
3 440-480 50/60 0 / 6 / 9 / 12
Phase Voltage (V)
Frequency (Hz)
Heating (kW)
1 200-240 50/60 0
3 200-240 50/60 12 / 18 / 21.9
3 380-415+N 50/60 12 / 18 / 21.9
3 380-415 50/60 0 / 12 / 18 / 21.9
3 440-480 50/60 0 / 12 / 18 / 21.9
Cap
acit
y 7
– 1
4 k
g C
apac
ity
18
– 2
8 k
g
Net weight Gross weight Dimensions (HxWxD*)
Transport dimensions
(HxWxD) Volume
(kg) (kg) (mm) (mm) (m3)
FX65 170 180 1115x710x740 1235x735x825 0,74 FX65
FX80 185 200 1115x710x790 1235x735x825 0,74 FX80
FX105 210 235 1225x795x795 1340x820x825 0,9 FX105
FX135 255 275 1225x795x945 1350x820x970 1,06 FX135
FX180 380 395 1410x970x970 1590x1110x1100 1,95 FX180
FX240 430 450 1410x970x1105 1590x1110x1240 2,18 FX240
FX280 495 515 1410x970x1185 1590x1110x???? FX280
Transport
Eco3 wash technology
20% less energy consumption
15% less water consumption
25% less residual moisture
Unbalance detection system especially for FX range
Ultra Balance Technology
o Anti-vibration system -> Ultra Balance detects any unbalance and adapts the spin speed accordingly
o Weighning system -> automatic adjusting of water level and soap dosage according to a measured weight of the load
Advantages: the machine is optimally protected against unbalances,
which results in a longer lifetime the noise level is reduced even more optimised stability during the entire cycle lower water and detergents consumption
Total solution:
FX creating team
• Objective:
- Brand new range of washer extractors
- Combine design and efficiency
- Continue in Xtreme Concept
- Develop new patents
- Be the best on the market
FX team - Engineering
• New assembly line for FX • Use of new CLINCH technology
• Tested and certified by Research Institute
• Scandinavian design
• Industrial design: - Assembly - Installation - Service after sales
• References: - Bang & Olufsen A/S - Jamo A/S - Nortec Systems A/S - Vestfrost A/S
Design cooperation
Distributors involvement
• Product made to the market demands
• Technical input from distributors • Interviews with end users
Marketing support
Special FX brochure
New design for FX Tech Spec
Successful presentation at ExpoDetergo
1. CascadeTM drum & PowerWashTM
Gentle drum for care applications & perforated lifters for better wash efect
2. ECO3 wash technology 20% less energy, 15% water, 25% moisture then previous generation
3. 400 G force Less than 50% of residual moisture
4. Ergonomic design for user & operator Large door openings >12 kg: 41cm door >20 kg: 46cm door Easy access to all vital parts
5. XControl+TM
Free programmable timer by USB, laptop or controller
6. Very silent operation Noise of extraction is about 65 dB(A)
7. Clinch technology Next gen. technology => no weldings => same strong connection => faster production
Top benefits
Language versions: English French Dutch Czech Russian German Italian Spanish Chinese
Discover more @ the Primus website
Follow us on:
FX video
Watch the FX video on: http://bit.ly/videofx
* This is a non-binding and indicative tool made available to Primus distributors for internal use only. Proprietary rights with regard to this tool belong to Alliance CE s.r.o. No guarantee can be given that its results are up-to-date and accurate and it should
therefore be used with particular circumspection. This tool should by no means be transmitted to any third party or otherwise made public. Please inform Primus’ marketing team of any remark you have in respect of this tool.
© 2015 Alliance CE s.r.o. All rights reserved.