functional inks and pastes - fraunhofer
TRANSCRIPT
F R A U N H O F E R I N S T I T U T E F O R m A N U FA c T U R I N g T E c H N O l O g y A N d A d vA N c E d m AT E R I A l S I FA m
FUNCTIONAL INKS AND PASTES
Various inks and pastes are needed for
functionalization of parts and components.
These include both commercially available
materials and internally developed inks
and pastes that we formulate to meet your
requirements. We utilize our extensive
technical and analytical resources for this
purpose. After the printing process, the
applied structures are thermally activated in
order to increase their electrical conductivity
and mechanical strength by removing any
organic parts, thus producing functionally
integrated components.
Printable inks and pastes
| Metals: Ag, Au, Cu, alloys (CuNiMn,
NiCr)
| Insulators: ceramics (TiO2, SiO2, Al2O3),
polymers
| Dielectric materials
| Biological materials: enzymes, proteins,
DNA, cells, bioceramics
| Thermocouples (types T, K, and J) and
resistor pastes (heating structures)
| Graphene and graphene composites
characterization
| Viscosity and sedimentation stability
| Surface tension and interface energy
| Particle size and distribution
| Material and phase analysis (EDX, XRD,
SEM, TEM)
Printing methods
| Screen printing
| Pad printing
| Dispensing valve technologies
| InkJet printing
| Aerosol Jet® printing
Fraunhofer Institute for
manufacturing Technology and
Advanced materials IFAm
Shaping and Functional Materials
Prof. Dr.- Ing. Matthias Busse
Wiener Strasse 12
28359 Bremen | Germany
Contact
Mario Kohl
Phone +49 421 2246-174
Cindy Behrens
Phone +49 421 2246-229
www.ifam.fraunhofer.de/en/printing
© Fraunhofer IFAM
1 Preparationoffunctionalmaterials.
2 Inks.
3 CuNiMnalloyinknanoparticles.
1 2 3