1

Full Curriculum Vitae

of Ir Prof. S. L. Chan M.Sc., Ph.D., FHKIE, MIStructE, CEng, FHKISC, RPE Appointment Lecturer 1987, Senior Lecturer (1990), Reader (1995), Professor (1996) and Chair Professor in Computational Structural Engineering (2013) at Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University Adjunct professor of Tongji University Shanghai, CHINA since 2007, Adjunct Professor at Harbin Institute of Technology, CHINA since 2004, Visiting Professor at Southeast University, Nanjing, CHINA since 1995, and Visiting Associate Professor at Purdue University, U.S.A. in 1993. Experience in practice Engineer in : Ove Arup and Partners (attachment)

Al-Handasah Consultant (London, U.K.) Gammon (Hong Kong)

Nationality : Hong Kong Chinese Citizen Academic Qualifications Ph.D. in Civil Engineering (Structures) at the University of Queensland, Australia in 1987 by an Australia scholarship M.Sc. Degree with rank 1st in class in Civil and Structural Engineering at the University of Wales, U.K. in 1983 Professional Qualifications Mainland China Class I Registered Structural Engineer Fellow of the Hong Kong Institution of Engineers (Structural Discipline), FHKIE Registered and Professional Engineer (RPE) Member of the Institution of Structural Engineers, U.K. (MIStructE) Chartered Engineer, U.K.(CEng) Award and Scholarship Queensland University Scholarship for the Ph.D. "Highly Commended" award by the Institution of Structural Engineers U.K. for model analysis in 1983. Research Fellowship by K.C. Wong Foundation Consultancy award in 2003 by PTec Ltd. Most active consultant merit award by PTec 2004. Supervisor of the student awarded the best ASCE (Hong Kong Chapter) project award in 2007. Supervisor of the student awarded the most outstanding PolyU student in 2008. PolyU Dean’s research award for RGC performance in 2007. PolyU Dean’s award for Outstanding Technology Transfer by the project for drafting of Code of Practice for Structural Uses of Steel 2005, Hong Kong. Structural award, HKIE, 2008 for the project MGM Macau, role as a structural designer for the glazed dome. Structural award, HKIE, 2008 for the project in Science Park, Hong Kong.

2

Class I awardbyTheMinistry of Education inMainlandChina forwork in nonlinearanalysisanddesignofhighrisebuildings. (教育部科技發展中心 -- 二零零八年度高等

學校科學研究優秀成果獎﹝科學技術﹞自然科學一等獎). Best paper award in transaction of the Hong Kong Institution of Engineers 2011 for the paper “Capacities of concrete-filled steel beams of unequal double spans by testing and code, vol., 18, no.1, March, 2011, pp.1-5”. Chief supervisor of the PhD Fellowship in 2011 which is an open bidding research grant for PhD candidature among all universities in Hong Kong. Supervisor of the student whose thesis entitled “Comparison Study between using linear first order analysis and second order analysis for a single layered dome” was given the ”Merit Award” by the ICE, HKA G&S Papers Competition 2011. Publications Two books and more than 300 papers in structural engineering including keynote papers and presentation papers in international conferences and book chapters. Selected examples of consultancy projects First principal consultant for the drafting of first edition “Code of Practice for structural uses of steel in buildings 2005”, Buildings Department, Hong Kong SAR Government. First principal consultant for the drafting of second edition “Code of Practice for structural uses of steel in buildings 2011”, Buildings Department, Hong Kong SAR Government. Consultancy award by PTec of PolyU in 2014. Design of a number of steel structures including the East Asia game in Macau, Tsuen Wan linking footbridges, Singapore Cloud Forest Conservatories, Transmission line towers in Myanmar, MGM space frames in Macau and others by the second-order direct analysis. Community Services and visiting Research Position . Member of committee of the new Mainland Chinese 内地的《钢结构设计规范》GB50017-

2003 which is a legal design code for steel structures in China - Director of Ove Arup and HKPolyU joint venture for drafting of “Limit State Design

Code for Steel Structures”, client : Buildings Department, Hong Kong SAR Government

- Director of Research Centre in Advanced Structural Engineering, The Hong Kong Polytechnic University http://www.cse.polyu.edu.hk/research/rcatise/home.htm .

- Worked previously as consultant of steel structure design for OVe Arup and Partners (Hong Kong) Limited, Siu Yin Wai and Associates Limited, Meinhardt Civil and Structural Engineering Consultant and AECOM Maunsell Consultant Limited. Editorial work of the following international / national journals Journal title Publisher Official title Remarks International Journal Advanced Steel Construction

the Hong Kong Institution of Steel Construction

Managing and chief editor

SCI

Steel and Composite Structures – an International Journal

Techno-press in Korea

Editor-in-chief for Asia-Pacific region and founding editor

SCI indexed. served from 2002-

3

2005 International Journal of Applied Mechanics and Engineering”

Technical University Press, Zielona Gora, Poland

Regional editor for Asia

Its members mostly in Europe

International Journal of Constructional Steel Research

Elsevier Science Member of editorial board

SCI

International Journal of Engineering Structures

Elsevier Science Member of editorial board

SCI

International Journal of Structural Stability and Dynamics

World Scientific Member of editorial board

SCI

Proceedings of the Institute of Civil Engineers - Civil Engineering

Chartered institution of Civil Engineers, U.K.

Member of the Editorial Advisory Panel

SCI

Advances in Structural Engineering

Multi-science Member of editorial board

SCI

“Steel Construction - Design and Research”

the European Convention for Constructional Steelworks, published by Ernst & Sohn (Wiley).

Member of editorial board

Its members mostly in Europe

Journal “Steel Structures” Beijing, China. Member of editorial board

in Chinese

Progress in Steel Building Structures

Tongi University, Shanghai, China (in Chinese)

Member of editorial board

in Chinese

International Journal of Advances in Civil Engineering

Hindawi Publishing Corporation.

Member of editorial board

/

- Founding and incumbent President of the Hong Kong Institute of Steel Construction

with more than 150 members, which also organized 25 seminars in the past two years, attracting an average of 80-100 participants for each event (web : www.hkisc.org )

- Member international expert panel of the American Institute of Steel Construction (AISC)

- Member of technical publication panel and research panel of The Institution of Structural Engineers, U.K. since 2011 - present

- Elected as a prestigious Honorary Fellow of the Singapore Structural Steel Society for year 2009. Other recipients include Professors Nethercot as Head of Civil and Environmental Engineering Department at Imperial College, WFChen as member of American Academician in Engineering, E.Bijlarrd as Chairman of Eurocode-3.

- Hong Kong Representative of the research panel of the Institution of Structural Engineers, http://www.istructe.org/members/committeemembers.asp?CID=51

- Presenter of seminars at Buildings Department on Glass Structures in December 96 and at Headquarters of Hong Kong Institution of Engineers on design of steel structures and glass structures

4

- Assessor, Quality Building Award, 2012. . External assessor for the Applied Research and Development Scheme for the Hong

Kong Government . Assessor for the Laboratory Assessments issued by the National Association of

Testing Authorities, Australia, which is also a HOKLAS assessor qualification . Assessor for research grant supported by Australian Research Grant (ARC) . One of the authors for the "Design Tables for Structural Use of Steel, 1987" which is

widely used by the Hong Kong engineers for practical design of steel structures in Hong Kong.

. Member in the review and drafting committee for the Code of Practice for the Design of Steel Buildings in Hong Kong, Buildings Department, Hong Kong.

. Member of the Appeal Board for safety of amusement equipment for the Recreation and Culture Department, Hong Kong Government.

. Examiner for Ph.D. and M.Phil. Students for the university of New South Wales, Hong Kong University, HKUST, City University, National University of Singapore, and Queensland University.

Member of international scientific committees of the following conferences 2nd International Conference on Thin-walled Structures organised by the

National University of Singapore 17th Australian Conference on the Mechanics of Structures and Materials,

June 2002, Goldcoast, Queensland, Australia. The MOUCHEL Centenary Conference on Innovation in Civil and Structural

Engineering, 2-4 December 1998, Cambridge, U.K., 19-21 August 97" "International Conference on Structural Stability and Design, 30 October - 1

November 95",University of Sydney, Australia. "Asia-Pacific conference on Shell and Spatial Structures, May 21-25, 1995,

Beijing, China A Rehabilitation, Renovation and Repairs of Structural Systems held at the

Andhra University, Visakhapatnam, India, January 1994 International Conference on Glass in building, Bath University, 1999. 2nd European Conference on Steel Structures, Praha, Czech Republic, May

26-29, 1999. 7th international Conference on Civil and Structural Engineering Computing,

13-15 September 1999, Oxford, England. 1st International Conference on Structural Stability and Dynamics,

December 7-9, 2000, organised by National Taiwan University 2nd International Conference on Structural Stability and Dynamics, 18-16

December 2002, Singapore, World Scientific. 9th International Conference on Computing in Civil and Building

Engineering (ICCCBE), Taipei, Taiwan, April 3-5, 2002 6th Pacific Structural Steel Conference, organised by China Steel

Construction Society, October 2001, Beijing, China. 2nd China, Taiwan and Hong Kong conference on steel structures, 2001,

Taipei, Taiwan, China International Conference Steel and Composite Structures in Seoul, Korea,

2004(The author is the Chairman of this conference) The first international conference on advances in experimental structural

engineering, 2005, Nagoya, Japan. International conference on metal structures, Poland, 2006 Third European Conference on Steel Structures 2002 ………

5

Services to professional and educational bodies and communities Chairman of Joint Structural Division of HKIE in 2013-2014 President of The Hong Kong Institute of Steel Construction which operates a SCI expanded journal and provide CPD courses to engineers regularly ( www.hkisc.org ) Consultant for government, leading consultants and contractors in Hong Kong which include Ove Arup and Partners (Hong Kong) Limited, AECOM-Maunsell Consultant, Gammon Construction, Buildings and Labour Departments of HKSAR Government … Examiner of candidates for Reciprocal recognition agreement between HKIE and National administration board of engineering registration (structural) for MHKIE/RSE-I in China Vice-chairman of the Structural Discipline Panel which assess applicants for structural discipline to The Hong Kong Institution of Engineers (HKIE) in 2014 Principal consultant for the Code of practice for structural uses of steel 2005 and 2011 editions, published by Buildings Department, Hong Kong SAR Government Member of examiner board for Registered Structural Engineers in Hong Kong SAR Government from 2011 to present Appointed member of Education and Examination Committee of HKIE Appointed member of Training Committee of HKIE Appointed member of Fire Discipline Advisory Panel of HKIE Appointed member of Structural Discipline Advisory Panel of HKIE Appointed committee member of Fire Division of HKIE from 2009 to present Deputy chairman of Joint Structural Division of HKIE in 2012-2013 Member, technical committee in The code of practice for structural uses of steel, 2010-2012 Member, technical committee in The code of practice in structural uses of concrete in 2012 Member, drafting committee of handbook for demolition works in 2010 published by HKIE External examiner of Department of Civil Engineering, Faculty of Science and Engineering at the CHU HAI College of Higher Education 2006 – 2010.

6

Performance of RGC competitive grant applications in the past 10 years Year Funding amount (HK$) Duration 2005 / 2006 $240,204 24 months 2006 / 2007 $654,000 36 months 2007/2008 $1,200,000 36 months 2008 / 2009 $779,628 36 months 2009/2010 / / 2010/2011 $697,221 36 months 2011/2012 $1,200,000 36 months 2012/2013 $500,000 36 months 2013/2014 $836,450 36 months 2014/2015 $692,894 36 months Funds from other sources in the past 2 years Year Funding amount

(HK$) Funding Organisations

Duration

2013 HK$1,361,600 CIC 36 months 2013 HK$600,000 ITF 36 months 2014 HK$930,350 ITF 36 months

7

SL Chan has been repeatedly invited by leading structural consultants to assist in structural design, not only in local but also in overseas projects. 

SL Chan organized conference series ICASS which has been held in Hong Kong, Shanghai and Singapore and edited the conference proceedings widely referred by researchers in steel structures. 

8

SL Chan is the chief, managing and founding editor of the SCI (Expanded)  journal on steel structures which is the only SCI journal in steel structures printed in Hong Kong. He is also an invited chief editor of other two journals and member of editorial board of seven others. 

SL Chan and his student Dr. Chui published a book on advanced design of steel structures in 2000. 

9

A publication is referenced in Load and Resistance Factor Design (2010) code for design of steel structures in USA .

10

Software Development Developer of the computer program NIDA, which is possibly the first commercial software for fully second-order integrated nonlinear design and analysis program using a curved element for simulation of member initial imperfection. Nida was also used by the Labour Department for collapse investigation of scaffolds and has been assessed and approved by Buildings Department of Hong Kong ( please see pre-accepted structural programs in the web as http://www.bd.gov.hk/english/inform/index_acp.html for practical design by the nonlinear analysis. Below are some of the users. Ove Arup and Partners (Hong Kong) Limited, Buildings Department of Hong Kong SAR Government, United Reliance Corporation Ltd., Canyon Scaffolding Limited, Wui Loong Scaffolding Limited, Yuan Long Technology Limited in Taiwan, Sucoot Scaffolding Limited in Taiwan, MSI Limited in Taiwan, Heriott-Watt University, Yuan Long Construction in Taiwan, Cardiff University, Queensland University, Leeds University, Hip Hing Contractor Ltd., Hong Kong University, City University in Hong Kong, Chayang University of Technology, National Yunlin University of Technology in Taiwan, Commonwealth Consultant Ltd. in Hong Kong, Slender structures Co. Ltd. in U.K., Hip Hing Contractor Ltd. and Pikitan SL Limited in Spain. The minimum residual displacement method in one of the author’s papers in 1988 (paper number 125) and incorporated in NIDA was also used as one the 4 numerical methods by the software OPENSEES developed by PEER operated ay the UC Berkerley in USA. (see web http://opensees.berkeley.edu/OpenSees/user/analysisCapabilities.php ).

11

PhD Supervison Supervisor of the following PhDs (in approximate chronological order for year of graduation) Dr. G.W.M Ho, PhD thesis title “Nonlinear analysis of semi-rigid steel frame” now Director in Ove Arup and Partners (Hong Kong) Limited. Dr. A.K.W. So, PhD title “Large deflection analysis of glass structures”, Director of the only accredited laboratory in fire testing in Hong Kong. Dr. Z.H. Zhou, Chief Engineer in a tension structure and glass company Dr. Benson Chan, Non-linear analysis of steel frames under non-proportional and fire loads Dr. P.T.T. Chui, Nonlinear and material, static and dynamic analysis of steel structures with semi-rigid connections. Dr. J.C.Y. Yiu Numerical simulation for structural steel member or framed structure at elevated temperature Dr. S.H. Cho Second-order analysis and design of angle trusses and frames Professor J.X. Gu, Large displacement elastic analysis of space frames allowing for flexural-torsional buckling of beams Dr. X. Sun, Design of unconventional slender steel structures by stability analysis Dr. L.X. Feng “Advanced nonlinear finite element analysis of concrete-steel composite structures”, and Dr. F.W. Wang in Southeast University in Nanjing, China. Dr. C.M. Koon, Chief Structural Engineer in Buildings Department and Dr. A.Y.,T. Chu of the same department Professor K.W. Chow (local supervisor) Associate professor of Department of Civil and Structural Engineering at the Hong Kong Polytechnic University, registered in Queensland University, Australia. Workshops and short courses 1-day workshop for Malaysian Structural Steel Society on “Second-order analysis to Eurocode-3” on 27th September 2005 in Kuala Lumpur. 1-day seminar on Key aspects of structural building steelwork design to BS5950 & Eurocode, 22nd August 2004 in Singapore and 20th August 2004 in Kuala Lumpur Advances in Structural Codification for buildings, Annual seminar of the Joint HKIE and IStructE annual seminar, 7th June 2005. 3-day workshop on Hong Kong Steel Code 2005 on 23, 24 and 25 November 2005 for government engineers in Hong Kong. 2-day workshop on steel and composite structures to Eurocode 3 and BS 5950, 17 and 18 November 2005, organised by Institution of Engineers, Malaysia, Kota Kinabalu, Sabah, Malaysia. Short course lecture at Leeds University on 1st February 2006 on “Advanced structural steel structure design”. Seminar at Headquarters of the Institution of Structural Engineers on April 2004.

12

PUBLICATIONS

Books 1. Chan, S.L. and Chui, P.P.T.,"Non-linear Static and Cyclic analysis of

semi-rigid steel frames", Elsevier Science, 2000, pp.336.

2. Chan, S.L. and Xian, X.J., “Engineering and mechanical properties of structural bamboo”, Research Centre in Advanced Technology in Structural Engineering, The Hong Kong Polytechnic University, May, 2004, pp.113.

3. Structural Uses of Glass in Buildings, published by the Institution of

Structural Engineers, December 1999 (Member of the task group for drafting of the guide which is widely used by consultants in Hong Kong and other commonwealth countries).

4. Code of Practice for the Structural Uses of Steel 2005, pp. 355 , published

by the Buildings Department of Hong Kong SAR Government (First principal consultant for this legal document used for design of steel structures in Hong Kong, jointly with Ove Arup and Partners Hong Kong Limited- a commissioned project for drafting the document of fee HK$3.2 million or about US$ 400,000).

Chapters in Books

5. Ho. G.W.M. and Chan, S.L., Techniques in Vibration Analysis of

Structural Steel Frames, on "Structural Dynamic Systems Computational Technique and Optimization", edited by C.T. Leondes of University of California at Los Angeles, U.S.A., Gordon and Breach International Series in Engineering, Technology and Applied Science, Chapter 1, pp.1-46,1999.

6. Chui, P.P.T. and Chan, S.L. Techniques in Transient Analysis of Semi-rigid

Steel Frames, "Structural Dynamic Systems Computational Technique and Optimization", edited by C.T. Leondes of University of California at Los Angeles, U.S.A., Gordon and Breach International Series in Engineering, Technology and Applied Science, Chapter 2, pp.47-98,1999.

7. Kitipornchai, S. and Chan, S.L., Stability and Nonlinear Finite Element

Analysis of Thin-walled Structures', chapter 4 in 'Finite Element Applications to Thin-walled Structures', edited by J.W.Bull, Elsevier Applied Science Publishers Limited, U.K., 1990, pp.89-129.

8. So, A.K.W., Lee, A. and Chan S.L., Chapter on “Glass structures”, Handbook

of Structural Engineering, USA, pp.29-129-18, CRC, 2004.

9. Y. P. Liu, S. L. Chan and Dennis Lam, Section V. Case Study for semi-rigid design, Section V, in Semi-rigid Connections Handbook, edited by Wai-Fah Chen, Norimitsu Kishi, and Masato Komuro–January 2011.

13

EDITORIAL

10. Chan, S.L.,Special Issue in "Dynamic behaviour of flexible joints and analysis of flexibly connected steel frames", Engineering Structures, vol. 17, no.8, 1995, pp.542-602.

11. Chan, S.L., Special issue in "Non-linear behaviour and design of steel frames

and members", Journal of Constructional Steel Research, vol.48, no.2/3, 1998, pp. 61-210.

12. Chan, S.L. and Teng, J.G., proceeding of the first international conference

"Advances in Steel Structures", vol. 1 and 2, Pergamon Press, 1997, U.K. 13. Chan, S.L. and Teng, J.G., proceeding of the second international conference

"Advances in Steel Structures", vol. 1 and 2, Pergamon Press, 1999, U.K. 14. Chan, S.L., Teng, J.G. and Chung, K.F., proceeding of the second

international conference "Advances in Steel Structures", vol. 1 and 2, Pergamon Press, 2002, U.K.

15. Chan, S.L., “Proceedings for technical seminar on Computer Methods for

Economical and Safe Structural Design”, published by Hong King Institute of Steel Construction, 29th August 2003.

16. Chung, K.F. and Chan, S.L., “Proceedings of International Seminar on

“Bamboo scaffolds in building construction”, for International network for bamboo and rattan (INBAR) Proceedings no.8, 2002, pp. 110.

17. 第 1 屆海峽兩岸及香港鋼及金屬結構技術研討會 2000. jointly organized

by Tongji University, National Taiwan University and The Hong Kong Polytechnic University.

18. 第 2 屆海峽兩岸及香港鋼及金屬結構技術研討會 2001. jointly organized by Tongji University, National Taiwan University and The Hong Kong Polytechnic University.

19. 第 3 屆海峽兩岸及香港鋼及金屬結構技術研討會 2003. jointly organized by Tongji University, National Taiwan University and The Hong Kong Polytechnic University.

20. Chan, S.L., Proceedings for technical seminar on ‘Construction, Analysis and

Design of Light-weight and Long-span Steel Structures’, published by Hong King Institute of Steel Construction 19th June 2004.

21. Chan, S.L., Chung, K.F., Kwan K.K. and Vesey, D., “Proceedings of

International Symposium of Worldwide codified design and technology in steel

14

structures”, The Hong Kong Institute of Steel Construction, Hong Kong, February, 2004, pp.223.

22. 第 4 屆海峽兩岸及香港鋼及金屬結構技術研討會 Shen Z.Y., Li, G.Q. and

Chan, S.L., “4th International Conference in Advances in Steel Structures 2005”, vol. 1 and 2, Elsevier, 13-15th June 2005, Shanghai, China, pp.917.

23. 第 6 屆海峽兩岸及香港鋼及金屬結構技術研討會 Chan, S.L., K.C. Tsai and G.Q. Li, “6th International Conference in Advances in Steel Structures 2005”, vol. 1 and 2, HKISC, December 2010, Hong Kong.

24. Chan, S.L., Proceedings of the second international symposium on “Innovative Design of Steel Structures”, edited by B. Young, HKU, 5 December 2008, Hong Kong also appeared in Proceedings of the regency steel Asia International Symposium on “Innovations in Structural Steel”, 1 December 2008, edited by SP Chiew, Nanyang University of Technology, Singapore.

25. Chan, S.L. and Fong, M., “Second-order analysis investigation and experimental tests on shallow domes”, International symposium on Advances in Steel and Composite Structures, 5th August 2009, Singapore, edited by JYR Liew, pp.21-38.

KEYNOTE / INVITED PAPERS & PRESENTATIONS

26. Chan, S.L., A Generalized Numerical Procedure for Nonlinear and

Buckling Analysis of Framed Structures, International Journal for Space Structures, invited paper on the special issue on Nonlinear Solution Strategies, vol.6, No. 2, 1991, pp. 99-114.

27. Chan, S.L. and Chen, W.F., Design of unbraced semi-rigid steel frames by

advanced analysis, invited paper at International Symposium on Strength Theories, Applications and Development, Xian, China, September, 1998, pp. 1001-1007.

28. Chan, S.L., F. Wong, F. So and S.W. Poon, Empirical Design and

Structural Performance of Bamboo Scaffolding, invited lecture for the 1-day Workshop on Bamboo and Metal Scaffolding, Hong Kong Institution of Engineers, Workshop Proceeding, October, 1998.

29. Chan, S.L. and Zhou, Z.H., Advanced Second-order Analysis combining

Analysis and Design, Invited lecture, Proceeding of Asia-Pacific on Shell and Spatial Structures, May 21-25, 1995, Beijing, China, pp.196-208

30. Ho, W.M.G. and Chan, S.L., An Accurate and Efficient Method for Large

Deflection Analysis of Frames with Semi-rigid Connections, invited paper in Special Issue on South East Asian Research of the Journal of Constructional Steel Research, vol.26, 1993, pp.171-191.

31. Chan, S.L., On the Non-linear Analysis of Space Frames, invited plenary

lecture on 6th National Conference on Spatial Structures, Guangzhou, December, 1992.

15

32. Chan, S.L., Koon, C.M. and Z.H.Zhou, Application of the second order analysis to practical design using a single element per member”, Keynote paper, 6th International Conference on Steel and Space Structures, Singapore, September, 1999, pp.1-9.

33. Chan, S.L., Shi G. P. and Luo Z.T., "Stability analysis and Parametric Study

of pre-stress stayed columns", invited/keynote paper, China, Taiwan and Hong Kong Conference on steel structures, Shanghai, May 2000, pp.111-124.

34. Chan, S.L. and Peng, J.L., “Performance-based design of steel scaffolding

systems by stability analysis”, Invited Lecture, International Conference on Structural Stability and Dynamics, 7-9 December 2000, Organised by National Taiwan University, proceeding edited by Yang, Y.B., Leu, L.J. and Hsieh, S.H., pp.205-210.

35. Chan, S.L. and B.H.M. Chan, “Refined plastic hinge analysis of steel frames

under fire”, Steel and Composite Structures, Inaugural issue, vol.1, no.1, March 2001, pp.111-130.

36. Chan, S.L. “Stability design of steel structures : Theory and Practice”,

Keynote paper, International Conference on Steel and Composite Structures, Proceedings, vol. 1, pp.43-55, edited by C.K. Choi and H.G. Kwak, 2001.

37. Chan, S.L., “Non-Linear behaviour and design of steel structures”, invited

review paper, Journal of Construction Steel Research, vol. 57, no.12, December, 2001, pp.1217-1232.

38. Chan, S.L., “Snap-through buckling and design of shallow domes with various

magnitude of imperfections”, STEEL & SPACE STRUCTURES, 7th International Conference on 2 - 3 October, 2002

39. Chan, S.L. ,”Second-order analysis in steel frames”, Seminar presentation at

Headquarters of the Institution of Structural Engineers in London, 2 April 2003, arranged by ISS Software Ltd. in U.K.

40. Chan, S.L., “Snap-through analysis and design of shallow roofs allowing for

various modes of imperfection”, Invited paper, International Conference of Structural Stability and Dynamics, proceedings, pp. 46-53.

41. Chan, S.L. and Ho, W.M.G., “Advanced numerical technique for analysis and

design of structures in new millennium”, Proceeding, Construction challenges into the next century, organised by the Hong Kong Institution of Engineers, 2003, pp.206-213.

42. Chan, S.L. et. al., “Pacific Structural Steel Conference, 2004”, Long Beach,

USA (supported by American Institute of Steel Construction USA). 43. Chan, S.L., “Direct analysis and design of steel frames allowing for Column

flexural and Beam Lateral-torsional buckling”, Keynote paper, International Symposium on Innovation and Advances in Steel Structures, Singapore, 30-31 August 2004, Singaporean Structural Steel Society annual lecture.

16

44. Chan, S.L. and Chan, S.T.P., “Proper second-order and advanced analysis of

steel frames”, proceedings for annual seminar 2005, Joint Structural Division, The Hong Kong Institution of Engineers and The Institution of Structural Engineers, 7 June 2005, Hong Kong Convention & Exhibition Centre, pp.53-66.

45. Chan, S.L., “Concept and application of member-based linear and system-

based nonlinear analysis in steel structure design, keynote lecture in 3rd International Conference on Steel and Composite Structures, Manchester, 30 July to 1 August, 2007, proceedings edited by Y Wang and C K Choi, pp.67-76.

46. Chan, S.L., “Theory and Practice of Advanced Analysis”, keynote lecture,

International Conference on Metal and Steel Structures, proceedings edited by D. Dubina and V. Ungureanu, Romania, 20-22 September 2006, pp. 15-20.

47. Chen, W.F. and Chan, S.L. , “Advanced Analysis – from Theory to Practice”,

Keynote Lecture, XI International Conference Metal Structures, June 21-23, 2006, Rzeszów, Poland.

48. Chan, S.L. and Peng, J.L., “Advanced stability design of scaffolding systems

by notional force and by buckling mode as imperfection mode methods, Keynote lecture, Steel and Aluminum Structures, ICSAS’07, edited by R.G. Beale, 24-27 July, Oxford, U.K., proceedings, pp.52-29.

49. Chan, S.L., Cho, S.H. and Chen, W.F., “Buckling strength of angle trusses in

experiment, by code and by second-order analysis”, invited lecture in special session on codification , 3rd International Conference on Steel and Composite Structures, Manchester, 30 July to 1 August, 2007, proceedings edited by Y Wang and C K Choi, pp.77-82.

50. Chan, S.L., “Structural design and common breakage causes of glass panes in buildings”, MATSEC conference organised by material division of the Hong ong Institution of Engineers, 13-15 June 2007, Nikko Hotel, Kowloon, Hong Kong (paper appears in proceedings of the conference).

51 Chan, S.L. and S.T.P.Chan, PROPER SECOND-ORDER AND ADVANCED ANALYSIS OF STEEL FRAMES”, Proceedings for annual seminar 2005 AAddvvaanncceess iinn SSttrruuccttuurraall CCooddiiffiiccaattiioonn ffoorr BBuuiillddiinnggss –– AA NNeeww EErraa ooff DDeessiiggnn aanndd CCoonnssttrruuccttiioonn ffoorr HHoonngg KKoonngg, Joint Structural Division, The Hong Kong Institution of Engineers and The Institution of Structural Engineers, 7 June 2007, Hong Kong Convention & Exhibition Centre, pp.53-66. 52 Chan, S. L.; Liu, Y. P.; Liu, S. W., Conference: 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC), JAN 26-28, 2011, PROCEEDINGS OF THE TWELFTH EAST ASIA-PACIFIC CONFERENCE ON STRUCTURAL ENGINEERING AND CONSTRUCTION (EASEC12) edited by, L.H. Fai, Series: Procedia Engineering Volume: 14 Pages: 1005-1012 DOI: 10.1016/j.proeng.2011.07.126 Published: 2011

53 Chan, S.L., Zhou, Z.H. and Liu Y.P., “Codified design of pre-tensioned glass

supporting truss systems”, HKIE/IStructE Joint Structural Division, Annual Seminar 2008, Proceedings of Innovative Light-weight Structures and Sustainable Facades, 7 May

17

2008, Convention Centre, Hong Kong. pp.39-49.

54 Chan, SL., Liu, Y.P. and Liu, S.W., “Design and second-order analysis of wall-framed structures”, Steel Construction, vol.24, no.128, 2009, pp.68-72. (in Chinese).

55 Chan, SL, Fong, M. and Liu, Y.P., “Advanced and second-order analysis of

composite columns, Keynote paper, International conference on steel concrete composite and hybrid structures, Leeds, 8-10 July 2009, pp.66-73.

56 Half-day seminar on “Design of Steel Structures according to Eurocode 3” in

3rd International Symposium on Innovative Design of Steel Structures”, held on 14 December 2010 (Tuesday) in Hong Kong, organised by Prof. Ben Young, University of Hong Kong.

57 Full-day seminar for the 4th annual symposium of Fire Division, HKIE, 3 May

2012on the lecture “Performance-based structural fire design and testing of structures”, pp. 52-67.

58 4th International Conference on Steel & Composite Structures, “Advanced Analysis

of Hybrid Frame Structures by Refined Plastic-Hinge Approach”, 21-23 July 2010, Powerhouse Museum, Sydney, edited by Brian Uy.

59 International conference on advance in steel concrete composite and hybrid structures, “Advanced analysis and design of complex and mega steel and composite structures”, 2-4 July 2012, Singapore, organized by the National University of Singapore.

JOURNAL PAPERS (* represents the corresponding author who is not the first author)

60 Liu, S.W., Liu, Y.P. and Chan, S.L.*, “Advanced analysis of hybrid steel and concrete frames, Part 1: Cross-section analysis technique and second-order analysis”, Volume 70, March 2012, Pages 326-336 (co-authors are my PhD students)

61 Liu, S.W., Liu, Y.P. and Chan, S.L.*, “Advanced analysis of hybrid steel and concrete frames, Part 2: Refined plastic hinge and advanced analysis”, Volume 70, March 2012, Pages 326-349. (co-authors are my PhD students)

62 Fong, M., Peng, Y.P. and Chan, S.L.*, “Second-order analysis and experiments of semi-rigid and imperfect domes”, Advances in Structural Engineering, 2013 (accepted for publication) (co-authors are my PhD students)

63 Tang, Y.Q., Zhou, Z.H. and Chan, S.L.*, “An accurate curved beam element based on

trigonometrical mixed polynomial function, Structural Stability and Dynamics, vol.13, No.4, 2013, (to appear).

64 Liu, Y.P. and Chan, S.L., “Second-Order and Advanced Analysis of Structures

Allowing for Load and Construction Sequences, Advances in Structural Engineering, vol. 14, No. 4, 2011, pp.635-646.

65 Peng, J.L., Wang, P.L., Chan, S.L.*, Chung-Ho Huang, C.H., “Load Capacities of

18

Single-Layer Shoring Systems – an Experimental Study”, Advances in Structural Engineering, accepted for publication.

66 Fong, M., Chan, S.T. and Chan, S.L.“Capacities of concrete-filled steel beams of

unequal double spans by testing and code, vol., 18, no.1, Transaction, HKIE, March, 2011, pp.1-5” (best paper award in 2011).

67 Y.P. Liu, S.L. Chan, Z.H. Zhou, D. So and R. Yu, “Second-Order Analysis and Design

of Wall-Framed Structures Allowing for Imperfections”, Advances in Structural Engineering, Volume 13 No. 3 2010, pp.513-524.

68 Fong, M., Chan, S.L. and Uy B., “Advanced design for trusses of steel and concrete-

filled tubular sections”, Engineering Structures, vol. 33, No. 12, 2011, pp.3162-3171.

69 Fong, M, S.H.H. Cho and Chan, S.L., “Design of angle trusses by codes and second-order analysis with experimental verification”, Journal of Constructional Steel Research, 65, 2009, pp. 2140-2147.

70 Fong, M. and Chan, S.L. , “Analytical and experimental studies of steel and

composite trusses”, Advanced Steel Construction, vol., 7, no.1, 2010, pp.17-20. 71 M. Fong, Y.P. Liu, S.L. Chan*, “Second-order analysis and design of imperfect

composite beam-columns”, Engineering Structures, 32, 2010, pp. 1681-1690. 72 Chan, Y.K., Iu, C.K, Chan, S.L.* and Albermani, F.G., “Performance-based structural

fire design of steel frames using conventional computer software”, Steel and Composite Structures, Vol. 10, No.,3, June 2010, pp. 207-222.

73 Chan, S.L., Liu, YP, and Andy Lee, “Nonlinear analysis of pre-tensioned glass wall

facade by stability function with initial imperfection”, Frontier Architecture and Civil Engineering, China, 2010, pp.376-382.

74 J.L. Peng, K.H. Chan, SL Chan* and W.T. Chen, “Experimental and analytical

investigations of scaffolds with anchor rods and planks”, International Journal of Structural Stability and Dynamics, vol.9, issue 2, June 2009, pp.307-332.

75 J.L. Peng, T. Yen, C.C. Kuo and S.L. Chan*, “Analytical and experimental bearing

capacities of system scaffolds”, Journal of Zhejiang University Science A, vol. 10, no. 1, 2009, pp.82-92.

76 S.W. Liu, S.P. Liu and S.L. Chan*, “Pushover analysis by one element per member

for performance-based seismic design”, International Journal of Structural Stability and Dynamics, vol. 10, no.1, March, 2010, pp. 111-126.

77 Y.P. Liu and S.L. Chan*, “Semi-empirical design of complex metal beams by

buckling analysis”, The IES Journal Part A: Civil & Structural Engineering, 1937-3279, Volume 2, Issue 1, 2009, Pages 85 – 96.

19

78 Y.P. Liu and S.L. Chan*, “Second-order analysis for design of glass-supporting and pre-tensioned trusses”, International Journal of Structural Stability and Dynamics, Vol. 9, no.3, September 2009, pp. 489-510.

79 J.L. Peng, K.H. Chen, S.L. Chan* and W.T. Chen, “Experimental and Analytical

Studies on Steel Scaffolds under Eccentric Loads”, Journal of Constructional Steel Research, vol. 65, 2009, pp.425-435.

80 J.L. Peng, S.L. Chan* et al. Experimental Study of Modular Falsework System with Wooden Shores Under Various Path Loads, Advances in Structural Engineering, vol. 11 no. 4, 2008, pp.369-382

81 Chan, S.L. and Cho, S.H., “Second-order analysis and design of angle trusses Part 1: Elastic analysis and design” Engineering Structures, 30, 2008, pp.616-625.

82 Chan, S.L. and Cho, S.H., “Second-order analysis and design of angle trusses Part 2: Plastic analysis and design” Engineering Structures, 30, 2008, pp.626-631.

83 Iu, C.K., Chen, W.F., Chan, S.L. and Ma, T.W., Direct second-order elastic analysis for steel frame design, KSCE Journal of Civil Engineering, Volume 12, Number 6, 2008, pp. 379-389.

84 Chan, S.L., “Codified simulation-based design of steel structures in the new Hong Kong Steel Code”, The Structural Engineer, 18 October 2005, pp. 16-18

85 J.L. Peng, S.L. Chan and C.L. Wu, Effects of geometrical shape and incremental loads on scaffold systems, Journal of Constructional Steel Research , Volume 63, Issue 4 , April 2007, Pages 448-459

86 Iu C.K., Chan, S.L. and Zha, X.X., “Material yielding by both axial and bending spring stiffness at elevated temperature”, Journal of Constructional Steel Research, 63 (5): 677-685 MAY 2007

87 Albermani, F., Goh, G.Y. and Chan, S.L., “Lightweight bamboo double layer grid system “, Engineering Structures, 29 (7): 1499-1506 JUL 2007

88 Wong, Y.L., Yu, T. and Chan, S.L., “A simplified analytical method for unbraced composite frames with semi-rigid connections”, Journal of Constructional Steel Research, 63 (7): 961-969, July, 2007

89 Law, S.S., BU, J.Q., Zhu X.Q. and Chan, S.L., “Vehicle condition surveillance on

continuous bridges based on response sensitivity”, Journal of Engineering mechanics, ASCE, 132 (1): 78-86 JAN 2006

90 Law, S.S., Wu, Z.M. and Chan, S.L., “Analytical model of a slotted bolted connection element and its behaviour under dynamic load”, JOURNAL OF SOUND AND VIBRATION 292 (3-5): 777-787 MAY 9 2006

91 Law, S.S., BU, J.Q., Zhu X.Q. and Chan, S.L, “Wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast”, WIND AND STRUCTURES 9 (5): 387-396 SEP 2006

92 Law, S.S., BU, J.Q., Zhu X.Q. and Chan, S.L, “Response prediction of a 50 m guyed mast under typhoon conditions”, WIND AND STRUCTURES 9 (5): 397-412 SEP 2006

93 Law, S.S., Zhu, X.Q. Bu, J.Q. and Chan, S.L. (2007). Moving load identification on a simply supported orthotropic plate. International Journal of Mechanical Sciences. 49(11), 1262-1275

94 F.W. Wang and S.L. Chan, “Optimization and sensitivity analysis of space frames allowing for large deflection”, Engineering Structures, no.10, vol. 28, 2006, pp.1395-1406.

95 S.L. Chan, Y.P. Liu and Z.H. Zhou, “Limitation of effective length method and

20

codified second-order analysis and design”, International Journal of Steel and Composite Structures”, vol. 5, no. 2-3, April-June, 2005, pp.181-192.

96 S.L. Chan and C.K. Iu, “On the advanced analysis of steel frames allowing for flexural, local and lateral-torsional buckling”, International Journal of Steel Structures, vol. 6, No. 2, March 2006, pp. 121-128.

97 S.H. Cho and S.L. Chan, “Practical second-order analysis and design of single angle trusses by an equivalent imperfection approach”, Steel and Composite Structures, vol. 5, no. 6, December, 2005, pp.443-458.

98 G.P. Shi, S.L. Chan and Z.T. Lu, “Second-order analysis and design of cables and

cable-frames”, International Journal of Structural Stability and Dynamics, vol.5, no.4, 2005, pp. 521-537.

99 S.L. Chan and W.F. Chen, “New dimension New Dimension in Structural Steel

Design in the 21st Century – Advanced Analysis in Practice”, Journal of Advanced Steel Construction, vol.1, no.2, 2005, pp.87-102.

100 EHW Chan, HCH Suen and S.L. Chan, “An integrated project extranet design

prototype: e-AEC for architects, engineers and contractors in Hong Kong and mainland China”, Journal of Construction Research, Volume 6, Issue 2, September 2005, Pages 253-271

101 Iu Chi-Kin, Chan, S.L. and XX Zha, “Nonlinear pre-fire and post-fire analysis of

steel frames”, Engineering Structures, vol.27, no.11, pp. 1689-1702, 2005.

102 Law S.S., Li X.Y., Zhu X.Q. and Chan, S.L. “Structural damage detection from wavelet packet sensitivity”, Engineering Structures, vol. 27, no.9, pp. 1339-1348, 2005.

103 Chan, S.L., Huang, H.Y. and Fang, L.X., “Advanced analysis of imperfect portal

frames with semi-rigid base connections”, Journal of Applied Mechanics, ASCE, vol. 131, Number 6, June 2005, pp. 633-640.

104 Chan, S.L. and Cho, S.H., “Second-order P- analysis and design of angle trusses

allowing for imperfections and semi-rigid connections”, International Journal of Advanced Steel Construction, vol.1, no.1, 2005, pp. 157-172.

105 Gu, J.X. and Chan, S.L., “A refined finite element formulation for flexural and

torsional buckling of beam-columns with finite rotations”, Engineering Structures, 27, 2005, pp.749-759.

106 Gu, J.X. and Chan, S.L., “Design of frames with imperfect members and global

geometry by second-order analysis with section capacity check”, International Journal for Numerical Methods in Engineering, vol. 62, 2005, pp.601-615.

107 Yu, W.K., Chung, K.F. and Chan, S.L., “Axial buckling of bamboo columns in

bamboo scaffolds”, Engineering Structures, vol.27, no.1, 2005, pp. 61-74.

108 Li, C.W. and Chan, S.L. , Directionality Reduction Effect of Design Wind Loads on Hong Kong Buildings, Transaction, vol.11, no.4, HKIE, December 2004.

21

109 Iu C.K. J. and Chan S.L., “A simulation-based large deflection and inelastic analysis

i. of steel frames under fire”, Journal of Constructional Steel Research, No. 60, 2004, pp.1495-1524.

110 Chan, S.L., A.Y.T. Chu and Albermani, F.G., “Stability and simulation-based design

of steel scaffolding without using the effective length method”, Structural Stability and Dynamics, vol.3 ,no.4, Dec. 2003, pp. 443-460.

111 Zhou, Z.H. and Chan, S.L., “Elastoplastic and large deflection analysis of steel

frames by one element per member. Part 1 : One hinge along member”, Journal of Structural Engineering, ASCE, April, 2004, vol. 130, No.4, pp.538-544.

112 Chan, S.L. and Zhou, Z.H., “Elastoplastic and large deflection analysis of steel

frames by one element per member. Part 2 : Three hinges along member”, Journal of Structural Engineering, ASCE, April, 2004, vol. 130, No.4, pp.545-553.

113 Trahair, N.S. and Chan, S.L., “Out-of-plane advanced analysis of steel structures”,

25, Engineering Structures, 2003, pp.1627-1637.

114 Li, J.J., Li, G.Q. and Chan, S.L., “A second-order inelastic model for steel frames of tapered members with slender web”, Engineering Structures, 25(8), 2003, pp.1033-1043.

115 Law, S.S., Wu Z.M. and Chan, S.L. “Vibration control study of a suspension

footbridge using hybrid slotted bolted connection elements”, Engineering Structures, 26(1), 2004, pp.107-116.

116 Law, S.S., Wu Z.M. and Chan, S.L, “Hybrid finite element with frictional joints for

dynamic analysis of steel frames”, Journal of Engineering Mechanics, ASCE, 129(5), 2003, pp.564-570.

117 Yu, W.K., Chung, K.F. and Chan, S.L., “Column buckling of structural bamboo”,

Engineering Structures, vol.25, 2003, pp.755-768.

118 Yu, W.K., Chung, K.F. and Chan, S.L., “Structural stability of multi-storey door-type modular steel scaffolds, Engineering Structures, 26, 2004, pp.867-881.

119 Siu, Y.W., Lai, B.S.L., Wang, W.F. , Zhou, Z.H. and Chan, S.L., “Optimisation of

structures by optimality criterion method”, Transaction, HKIE, vol. 10, no. 3, September 2003, pp. 48-53.

120 Li, J.J. and Chan, S.L., “An integrated analysis of membrane structures with flexible

supporting frames”, Journal of Finite elements in Analysis and Design, vol.40, 2004, pp.529-540.

121 Peng, J.L., Wu, C.L. and Chan, S.L., “Sequential pattern load modeling and warning

system plan in modular falsework”, Structural Engineering and Mechanics, vol.16, no.4, 2003, pp. 441-468.

122 Law, S.S., Wu Z.M. and Chan, S.L. “Vibration control study of a suspension

22

footbridge using hybrid slotted bolted connection elements”, Engineering Structures, 26(1), 2004, pp.107-116.

123 Law, S.S., Wu Z.M. and Chan, S.L, “Hybrid finite element with frictional joints for

dynamic analysis of steel frames”, Journal of Engineering Mechanics, ASCE, 129(5), 2003, pp.564-570.

124 Yu, W.K., Chung, K.F. and Chan, S.L., “Column buckling of structural bamboo”,

Engineering Structures, vol.25, 2003, pp.755-768.

125 Yu, W.K., Chung, K.F. and Chan, S.L., “Structural stability of mmulti-storey door-type modular steel scaffolds, Engineering Structures, 26, 2004, pp.867-881.

126 Chan, S.L., Koon, C.M. and Albermani, F.G., “Theoretical and experimental studies

of unbraced tubular trusses allowing for torsional stiffness”, Steel and Composite Structures, vol.2, no.3, 2002, pp.209-222.

127 Sun, X. and Chan, S.L., “Design and second-order analysis of trusses composed of

angle sections”, International Journal of Structural Stability and Dynamics, vol.2, no.3, 2002, pp.315-334.

128 So, A.K.W., Lai, B.S.L. and Chan, S.L., “Economical design of glass and aluminum

panels by the large deflection theory”, HKIE Transaction, vol.9, issue3, December 2002.

129 Chen, J.F., Teng, J.G. and Chan, S.L., “Design of biaxially loaded short composite

columns of arbitrary section” Journal of Structural Engineering, ASCE, June, 2001, vol.127, no.6, pp.678-685.

130 Chan, B.H.M., Chan, S.L. and Law, S.S., “Nonlinear behaviour of pitched roof steel

frames subjected to sequential loads”, Journal of Applied Mechanics and Engineering, Vol.5, no.4, 2000, pp.773-794.

131 Chan, S.L. and Gu, J.X., “Exact tangent stiffness for imperfect beam-column

members”, Journal of Structural Engineering, ASCE, 2000, vol.126, no.9, September, 2000, pp.1094-1101.

132 Chan, S.L., Shu, G.P. and Lu, Z.T., “Stability analysis and parametric study of pre-

stressed stayed columns”, Engineering Structure, Vol.24, No.1, January 2002, pp.115-124.

133 Fang, L.X., Wong Y.L. and Chan, S.L., “Strength analysis of semi-rigid steel

concrete composite frames”, Journal of Constructional Steel Research, vol.52, No.3, 1999, pp.269-292,

134 Fang, L.X., Chan, S.L. and Wong, Y.L., “Numerical analysis of composite frames

with partial shear-stud interaction by 1 element per member”, Engineering Structures, vol.22, no.10, October, 2000, pp. 1285-1300.

135 Peng, J.L., Chan, S.L. et al., Simplified modelling and analysis of pattern loading

23

effects on shoring systems during construction, Advances in Structural Engineering, vol. 1, no.3, 1998, pp. 203-218.

136 Chan, S.L. and Zhou, Z.H., On the development of a robust element for second-order

"Integrated Analysis and Design Approach", Journal of Constructional Steel Research, vol.47, no. 1/2, , 1998, pp.169-190.

137 Chan, S.L., and Zhou, Z.H., “Non-linear integrated design and analysis of skeletal structures by 1 element per member”, Engineering Structures, vol.22, 2000, pp. 246-257.

138 Peng, J.L., Pan, A.D.E. and Chan, S.L., “Simplified models for analysis and design of

modular falsework”, Journal of Constructional Steel Research, Vol.48, No.2/3, 1998, pp.189-210.

139 Chen, W.F. and Chan, S.L., Second Order Inelastic Analysis of Steel Frames by

Personal Computers, Journal of Structural Engineering, Vol.21, No. 2, July 1994, pp.99-106.

140 Zhou, Z.H. and Chan, S.L., Second-order analysis of slender steel frames under

distributed axial and member loads, Vol. 123, No.9, Journal of Structural Engineering, ASCE, September, 1997, pp.1187-1193.

141 Chan, S.L. and Chui, P.P.T., A generalized design-based elasto-plastic analysis of

steel frames by section assemblage concept, Journal of Engineering Structures, vol.19, no.8, 1997, pp. 628-636.

142 Chui, P.P.T. and Chan, S.L., Transient response of moment-resistant steel frames

with flexible and hysteric joints, Journal of Constructional Steel Research, Vol. 39, No. 3, 1996, pp.221-243.

143 Chui, P.P.T. and Chan, S.L., Vibration and deflection characteristics of flexibly

connected steel frames, Journal of Engineering Structures, vol. 19, no.12, 1998, pp. 1001-1010.

144 Chan, S.L., Large deflection dynamic analysis of space frames, Computers and

Structures, Vol.58, No.2, 1996, pp.381-387.

145 Shi, Y.J., Chan, S.L. and Wong, Y.L., Modeling for Moment-Rotation Characteristics of End-Plate Connections, Journal of Structural Engineering, ASCE, vol. 122, no. 11, November, 1996, pp. 1300-1306.

146 Peng, J.L., Pan, A.D., Rososky-D.V., Chen, W.F., Yen, T. and Chan, S.L., High

clearance scaffold systems during construction Part I : Structural modeling and modes of failure, Journal of Engineering Structures, vol.18, No. 3, 1996, pp.247-257.

147 Peng, J.L., Pan, A.D., Rososky-D.V., Chen, W.F., Chan, S.L. and Yen, T., High

clearance scaffold systems during construction Part II : Structural analysis and development of design guidelines, Journal of Engineering Structures, vol.18, No. 3, 1996, pp.258-267.

24

148 Peng, J.L., Chan, S.L. et. al, Analysis of concrete placement load effects using

influence surface, Structural Journal of American Concrete Institute, Vol. 93, No. 2, March-April, 1996.

149 Peng, J.L., Pan, A.D.E., Chen, W.F., Yen, T. and Chan, S.L., Structural modeling and

analysis of modular falsework systems, Journal of Structural Engineering, ASCE, Vol. 123, No.9, September, 1997, pp. 1245-1251.

150 So, A.K.W. and Chan, S.L., Stability and strength analysis of glass wall systems

stiffened by glass fins, Finite Element in Analysis and Design, 23, 1996, pp.57-75.

151 Peng J.L., Chan S.L. et al., Application and Ultimate analysis of steel scaffolding, Construction News Record, Journal of Taiwan Construction Technology Centre, vol. 158, March, 1996, pp. 13-22.

152 Wong, Y.L., Chan, S.L. and Nethercot, D.A., A simplified design method for non-

sway frames with semi-rigid connections, the Journal of The Structural Engineer, vol.74, no.2/16, January, 1996, pp.23-28.

153 So, A.K.W. and Chan, S.L., Nonlinear finite element analysis of glass panels, Journal

of Engineering Structures, Vol. 18, No.8, 1996, pp.645-652.

154 Chan, S.L. and Zhou, Z.H., Second order analysis of frame using a single imperfect element per member, Journal of Structural Engineering, ASCE, vol. 121, No. 6, June, 1995, pp.939-945.

155 Zhou, Z.H. and Chan, S.L., A self-equilibrium element for second-order analysis of

semi-rigid jointed frames, Journal of Engineering Mechanics, ASCE, vol. 121, no.8, 1995, pp.896-902.

156 Zhou, Z.H. and Chan, S.L., Refined second order analysis of frames with members

under lateral and axial loads, Journal of Structural Engineering ASCE, Vol. 122, No. 5, May, 1996, pp.548-554.

157Chan, S.L., Vibration and Modal Analysis of Steel Frames with Semi-rigid Connections, Journal of Engineering Structures, vol.16, No.1, 1994, pp.25-31.

158Chan, S.L., Nonlinear Static and Dynamic Analysis of Space Frames with Semi-rigid

Connections, International Journal of Space Structures, Vol.8, No.4, 1993, pp. 261-269.

159Yau, C.Y. and Chan, S.L., Inelastic and stability analysis of flexibly connected steel

frames by the springs-in-series model, Journal of Structural Engineering, ASCE, October, 1994, pp.2803-2819.

160Chen, W.F. and Chan, S.L., Second Order Inelastic Analysis of Steel Frames using

Element with Mid-span and End Springs, March, Vol.121, No.3, Journal of Structural Engineering, ASCE, 1995, pp. 530-541.

25

161Chan, S.L., Zhou, Z.H., Chen, W.F. and Peng, J.L., Stability analysis of semi-rigid

steel scaffolding, Special Issue Behaviour of flexible joints and analysis of steel frames with semi-rigid connections in Journal of Engineering Structures, edited by Chan S.L., vol.17, No.8, 1995, pp. 568-574.

162Chan, S.L. and Zhou, Z.H., A Pointwise Equilibrating Polynomial (PEP) Element for

Nonlinear Analysis of Frames, Journal of Structural Engineering, ASCE, Vol. 120, No. 6, June, 1994, pp.1703-1717.

163Chan, S.L. and Ho, W.M.G., Vibrational Analysis of Flexibly Connected Steel

Frames, Vol. 120, No.4, Journal of Structural Engineering, ASCE, April, 1994, pp. 1075-1087.

164Chan, S.L., A Nonlinear Numerical Method for Accurate Determination of Limit and

Bifurcation Points, International Journal for Numerical Methods in Engineering, vol. 36, 1993, pp.2779-2790.

165Chan,S.L., Large Deflection Kinematic Formulations for Three Dimensional Framed

Structures, Computer Methods in Applied Mechanics and Engineering, 95, 1992, pp. 17-36.

166Ho, W.M.G. and Chan,S.L., On the Effects of Nonlinearity and Joint Flexibility in the

Lateral Drift Determination of Steel Buildings, Transaction, Hong Kong Institution of Engineers, No.2, 1992, pp. 5-12.

167Yau, C.Y., Chan, S.L. and A.K.W.So, Biaxial Bending Analysis of Reinforced

Concrete Columns of Arbitrary Shape, Structural Journal of American Concrete Institute, Vol. 90, No.3, May-June, 1993, pp.269-278.

168Chan, S.L. and A.K.W. So, Buckling Behaviour and Design of Unrestrained Steel

Beams, Transaction of the Hong Kong Institution of Engineers, No.4, 1992, pp.23-26.

169So, K.W.A. and Chan,S.L., Buckling Analysis of Frames using 1 Element / Member, Journal of Constructional Steel Research, 20, 1991, pp. 271-289.

170So, K.W.A. and Chan,S.L., Automatic nonlinear analysis and design of steel frames by micro-computers, Steel Structures, Journal of Singapore Steel Society, Vol.5, No.1, Dec., 1994, pp. 61-69.

171Al-Bermani, F.G.A., Kitipornchai, S. and Chan, S.L.,Formex Formulation of

Transmission Towers, International Journal for Space Structures, 7(1), 1992, pp.1-10.

172Chan,S.L., Yau,C.Y. and So, K.W.Andrew, Development of an Educational and

User-Friendly Design Software for Steel Members --- SD449, Journal of Hong Kong Institute of Engineers, vol. 19, No. 6, June 1991, pp. 32-36.

173Chan, S.L., Kitipornchai, S. and Al-Bermani, F.G.A, Elasto-Plastic Large Deflection

26

and Post-Buckling Analysis of Box Beam-Columns including the Local Buckling Effects, Journal of Structural Engineering, ASCE, 117(7), 1991, pp. 1946-1962.

174Ho, W.M.G. and Chan, S.L., Semi-Bifurcation and Bifurcation Analysis of Flexibly

Connected Steel Frames, Journal of Structural Engineering, ASCE, 117(8), 1991, pp. 2299-2319.

175Chan, S.L., Strength of Cold-formed Box Columns with coupled Local and Global

Buckling, The Structural Engineer, vol. 68, No. 7, April, 1990, pp. 125-132.

176Kitipornchai, S., Al-Bermani, F.G.A. and Chan, S.L., Elasto-Plastic Finite Element Models for Angle Steel Frames, Journal of Structural Engineering, ASCE, vol. 116, No. 10, October, 1990, pp.2567-2581.

177Chan, S.L., Buckling Analysis of Structures comprised of Tapered Members, Journal

of Structural Engineering, ASCE, Vol. 116, No. 7, July, 1990, pp. 1893-1906.

178Chan, S.L. and Lai, K.H., A Numerical Procedure for Nonlinear Analysis of Space Frames and Trusses, Transaction, Journal of the Hong Kong Engineers, Vol. 2, 1990, pp. 39-45.

179Chan, S.L.,Inelastic Post-Buckling Analysis of Tubular Beam-Columns and Frames,

Journal of Engineering Structures, Vol. 11, 1989, pp.23-30.

180Chan, S.L.,Geometric and Material Nonlinear Analysis of Beam-Columns and Frames using the Minimum Residual Displacement Method, International Journal for Numerical Methods in Engineering, vol. 26, 1988, pp.2657-2669.

181Chan, S.L. and Kitipornchai, S.,Inelastic Post-Buckling Behaviour of Tubular Struts,

Journal of Structural Engineering, ASCE, vol. 114, No. 5, 1988, pp.1091-1105.

182Chan, S.L. and Kitipornchai, S.,Geometric Nonlinear Analysis of Asymmetric Thin-Walled Beam-Columns, Journal of Engineering Structures, 1987, vol. 9, pp. 243-254.

183Kitipornchai, S., Al-Bermani F.G.A. and Chan, S.L.,Geometric and Material

Nonlinear Analysis of Structures comprising Rectangular Hollow Sections, Journal of Engineering Structures, 1988, vol.10, pp.13-23.

184Chan, S.L. and Kitipornchai, S.,Nonlinear Finite Element Analysis of Angle and Tee

Beam-Columns, Journal of Structural Engineering, ASCE, vol.113, No.4, 1987, pp.721-739.

185Narayanan, R. and Chan, S.L.,Effective Widths of Plates under Uniformly Varying

Edge Displacements, International Journal of Mechanical Science, vol. 28, No.6, 1986, pp.393-409.

186Narayanan, R. and Chan, S.L.,Ultimate Capacity of Plates containing Holes under

Linearly Varying Edge Displacements, Computers and Structures, vol.21, No.4, 1985, pp.841-849.

27

187Chak, P.L. and Chan, S.L.,Formulae to Calculate an Offset Curve Parallel to a Spiral

Curve, Civil Engineering Surveyors, December 1981/January 1982, pp.21-23. Chinese Journal Papers

188Chan, S.L., “Stability Design of Steel Structures”, Progress in Structural Engineering, col.4, No.4, 2002, pp.12-17.

189Chen, S.F., Teng, J.G. and Chan, S.L., “Analysis and Design of Arbitarily Shaped-

Steel-Concrete Composite Columns”, Progress in Structural Engineering, vol.4, No.4, 2002, pp.25-30

190Codified second-order P- analysis of steel frames using program “”NIDA”, Steel

Structures and Buildings, vol. 5, No.1, May, 2005, pp. 8-11. Discussion Papers

191 Chan, S.L. and Ko, J.M.,Research in structural steel in Hong Kong Polytechnic, vol. 73, The Structural Engineer, 1995, p.294.

192 Discussion on Buckling Analysis of Structures composed of Tapered

Members, Journal of Structural Engineering, ASCE, vol.118, No.3, March, 1992, pp.868-870.

193 Discussion on Semi-bifurcation and bifurcation analysis of flexibly connected

steel frames, Journal of Structural Engineering, ASCE, vol.119, No.10, October, 1992, pp.3104-3106.

194 Discussion on Buckling and geometrically nonlinear analysis of frames using

one element / member, Journal of Constructional Steel Research, vol.32, No.2, 1995, pp.227-230.

195 Discussion on A simplified design method for non-sway composite frames

with semi-rigid connections, Journal of Structural Engineer, vol.74, No. 16, 20th August 1996, pp.275-278.

196 Discussion on “Column, sway frames and BS5950-2000”, 20 March 2007,

The Structural Engineer, on-line. Seminar papers / lecture note for engineers

197Chan, S.L. and Cho, S.H., “Buckling and design of tubular scaffolds to European Standard”, invited speaker at Malaysian Iron and Steel Industry Federation (MISIF), 12 and 13 September 2005. pp. 1-12

198Chiew, S.P. and Chan, S.L., Key aspects of building steelwork design to BS5950 and

Eurocode 3, Proceedings, Workshop organized by the Institution of Engineers, Singapore, 15 August 2005.

28

199Chan, S.L., “Codified second-order analysis and design of steel structures” in “Worldwide trend and development in codified design of steel structures 2006”, proceedings, 2-3 October 2006, Singapore, edited by Chiew, S.P., Ting, S.K. and Tan, T.C.

200Conference Papers

201Chan, S.L. and Cho, S.H., “Experimental evaluation of simulation design for light-angle trusses”, Proceedings of the First International Conference on Advances in Experimental Structural Engineering, Nagoya, Japan, July 19-21, 2005, pp. 951-958.

202Chan, S.L. and Liu, Y.P., “Contemporary and codified design by second-order P

elastic and plastic analysis”, Proceedings of 2nd international worldwide codified design and technology in steel structures”, 17 and 18 June 2005, pp.45-60.

203Chan, S.L., Iu J.K. and Yuen, S.W., “Partition fire tests in Hong Kong and numerical

modeling of beams and columns under fire”, Proceedings, International seminar on Fire Engineering and Composite Construction, March 2003, pp. 1/8-10/8.

204Chan, S.L. and Cho, S.H., “Design of steel frames using calibrated design curves for

buckling strength of hot-rolled members”, Proceedings, “Advances in Steel Structures”, edited by Chan, Teng and Chung, Elsevier, 2002, Elsevier Science, pp.1193-1199.

205Chan, S.L., Peng, J.L., and Chen, W.F., “ Preliminary studies of non-linear integrated

design and analysis applied to scaffolding systems”, 2nd China, Taiwan and Hong Kong symposium on steel structures, edited by Tsai, K.C., Li G.Q. and Chan, S.L., November 2001, pp.65-76.

206Chan, S.L. and Yuen, S.W., “Codified design of steel structures by stability analysis”, Proceeding of 6th Pacific Structural Steel Conference, Beijing, China, 15-17 October 2001, pp.53-60.

207Chan, S.L., “Performance-based and economical design of efficient and high-

performance structures by NIDA”, International Conference on Construction, organized by the Hong Kong Institution of Engineers, Hong Kong, Proceedings, vol. 1, 19-21 June 2001, pp.34-43.

208J.X. Gu, Chan, S.L. and Z.H. Zhou, “Exact element for advanced analysis of practical

steel frames”, proceedings of 2001 annual technical session and meeting, May 9-12, 2001, Fort Lauderdale, Florida, U.S.A., pp.549-564.

209Chan, S.L. and Zhou, Z.H., “Performance-based design approach for steel structures

using stability and non-linear analysis”, Proceedings of the International Conference on Engineering and Technological Science 2000, Session 5, Civil Engineering in the 21st Century, pp. 651-654.

210Chan, S.L. and Ho, G.W.M., “Advanced Numerical Techniaues for Analysis and

29

Design of Structures”, Proceedings of the International Conference on Engineering and Technological Science 2000, Session 5, Civil Engineering in the 21st Century, pp. 661-665.

211Chan, S.L. and Andy Lee, “Rigorous design, non-linear analysis and full-scale testing

of pre-tensioned glass wall systems”, proceedings in Glass in Buildings, 7 and 8, April 2005, Bath, U.K.

212Chan, S.L., Koon, C.M. and S. Sun, “Design of glazed trusses by buckling analysis”,

Proceeding of Glass in Building, University of Bath, U.K., 31March 99 B 1 April 99.

213Chan, B.H.M. , Fang, L.X. and Chan, S.L., “Ultimate strength of semi-rigid frames

under non-proportional loads”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.145-150.

214Chui, P.P.T. and Chan, S.L., “Second-order plastic analysis of steel frames”, ,

Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.151-155.

215Chan, S.L. and Gu, J.X., “Studies on the methods of stability function and finite element for second-order analysis of frame structures”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.193-200.

216Chen, S.F., Teng, J.G. and Chan, S.L., “Design of composite columns of arbitrary

cross-section subject to biaxial bending”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.443-450.

217Wong, Y.L., Wang, J.Y. and Chan, S.L., “Effects of loading conditions on behaviour

of semi-rigid beam-to-column composite connections”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.451-458.

218Chu, A.Y.T. and Chan, S.L. “Design of steel scaffolding by nonlinear integrated

design and analysis (NIDA) and the stability function”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.791-798.

219Chui, P.P.T. and Chan, S.L., “Nonlinear seismis analysis of flexibly connected steel

buildings”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.823-830.

220Chan, K.T., Chan, S.L. and Wei, X.X., “Hoop stress reduction by using reinforced

rivet in steel structures”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.1125-1132.

221Wang, J.Y., Wong, Y.L. and Chan, S.L., “Modeling hysteresis loops of composite

30

joints using neutral networks”, Proceeding, 2nd International Conference on Advances in Steel Structures ICASS’99, Elsevier, vol. 1, 15-17 December, 1999, pp.1167-1174.

222Chan, S.L. and Ho, G.W.M., “Design and analysis of conventional and pre-tensioned

steel structures by buckling analysis using NIDA”, Seminar on Construction Challenges into the Next Century, 2-3 December 99, organised by the Hong Kong Institution of Engineers.

223Chan, S.L. and Koon, C.M., AAdvanced analysis and design of space domes@,

Proceeding of International Congress on Lightweight Structures in Architecture, Engineering and Construction, 5-9 October 1998, Sydney.

224So, A.K.W., Yuen, S.W. and S.L. Chan, AStability analysis and testing of glass wall

system@, Proceedings of the the 1st Symposium on Testing Techniques for Building Engineering and Product Quality, Shanghai, China, 1998, pp. 271-276.

225Chan, S.L., A.K.W.So and S.W. Yuen, “Snap-through buckling of plastic glassy

sheeting”, Proceeding of 2nd International Conference on Thin-walled Structures, Singapore, 2-4 December 1998, pp.313-328.

226Chui, P.T.T. and Chan, S.L., A On the effect of connection stiffness in dynamic

behaviour of semi-rigid steel buildings@, 5th International Conference on Tall Buildings, Hong Kong, 9-11, December, 1998, Hong Kong.

227Chan, S.L. and Zhou, Z.H.,The Non-linear Integrated Design and Analysis Method

for Practical Steel Frames, 1997 Annual Technical Session and Meeting, Structural Stability Research Council, U.S.A., July 10-11, 1997.

228Chui, P.P.T. and Chan, S.L.,A comparative study of non-linear dynamic behaviour of

semi-rigid jointed steel buildings, 5th International Colloquium on Stability and Ductility of Steel Structures, July, 29-31, 1997, Nagoya, JAPAN.

229Chan, S.L. and Zhou, Z.H.,Second-order and advanced analysis, the Integrated

Design and Analysis Approach - From Theory to Practice, 5th International Colloquium on Stability and Ductility of Steel Structures, July, 29-31, 1997, Nagoya, JAPAN.

230Chui, P.P.T. and Chan, S.L.,Inelastic behaviour of moment resistant steel frames,

Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.195-200.

231Chui, P.P.T. and Chan, S.L.,Cyclic response of flexibly jointed frames, Proceedings

of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.201-206.

232Wong, Y.L., Chan, S.L. , Nethercot, D.A. and Wang, J.Y., “A simplified design

method for unbraced frames with semi-rigid connections”, Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.213-220.

233Wong, Y.L., Wang, J.Y. and Chan, S.L. , Analysis of Semi-rigid Composite Joints

31

with Bolted End-Plates under Hogging , Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.

234Y.J. Shi, S.L. Chan and Y.L. Wong, Ultimate strength analysis of composite plane

frames, Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.221-226

235J.L. Peng, T. Yen, A.D.E. Pan, W.F. Chen and S.L. Chan, Structural Modeling and

analysis of scaffolding systems, Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp.251-256

236A.Y.T. Chu, Z.H. Zhou, C.M. Koon, S.L. Chan, J.L. Peng and A.D. Pan, Design of steel scaffolding using an integrated design and analysis approach, Proceedings of International Conference on "Advances in Steel Structures", Pergamon, 1996, pp. 245-250.

237S.W. Poon, and S.L. Chan, Structural Behaviour of Bamboo for Access Scaffolding

in Hong Kong, South East Asia-Pacific Conference in Structural Engineering and Construction, January 14-16, 1998, Taipei, Taiwan, pp.2167-2172.

238P.P.T. Chui, Z.H. Zhou, S.L. Chan and A.D. Pan, Second order analysis of roof truss

and frame, Proceedings of International Symposium on Structures and Foundations in Civil Engineering, 1994, Hangzhou, China, pp.167-176.

239Chui, P.P.T. and Chan, S.L., Dynamic Analysis of Space Frames with Semi-rigid

Connections, Proceeding of Asia-Pacific on Shell and Spatial Structures, Nay 21-25, 1995, Beijing, China, pp. 644-659.

240Chan, S.L. and Zhou, Z.H., Towards second-order analysis of practical steel frames

by a single crooked element per member, International Conference on Structural Stability and Design, Sydney, Australia, November, 1995, pp. 197-200.

241Chan, S.L. and Zhou, Z.H., Frame analysis by one element per member, 4th Pacific

Structural Steel Conference, Singapore, October 1995.

242Chan, S.L. and So, A.K.W., Large deflection analysis of glass panels, International Conference on Building Envelope Systems and Technology, 7-8, December 1994, Singapore, pp.176-183.

243Chan, S.L., Yu, A.K.K. and Law, Y.C., Refined analysis and design of mullions and

transoms in curtain wall systems, International Conference on Building Envelope Systems and Technology, 7-8, December 1994, Singapore, pp. 291-298.

244Chan, S.L., Second order analysis of roof trusses and frames, Overseas Chinese

conference on structural and foundation engineering, 25th- 28th October 1994 abstract accepted.

245So. A.K.W. and Chan, S.L., Strength analysis of glass panels, Australasian Structural

32

Engineering Conference-94, 1994, pp.769-774.

246Wong, Y.L. and Chan, S.L. and Nethercot, D.A., A simplified design for beams with semi-rigid connections, Australasian Structural Engineering Conference-94, 1994, pp.981-988.

247Chan, S.L., Zhou, Z.H. and Chen, W.F., Towards efficient and robust nonlinear

analysis of steel frames, ASCE Structural Congress, 93/94, Atlanta, U.S.A.

248Chan,S.L. and Yau, C.Y., Nonlinear Analysis of Roof Truss composed of Pinned, Rigid and Semi-rigid Jointed Members, Proceeding of International Congress on Innovative Long Span Structures, Toronto, Canada, 13-17 July 1992, pp. 175-185.

249Ho., G.W.M. and Chan, S.L., Numerical Study on the Post-buckling Analysis of Steel

Arches, 6th International Conference in Australia on Finite Element Methods, July, 1991, University of Sydney, New South Wales, Australia. pp. 421-428.

250Chan, S.L. and Ho., G.W.M., Large Deflection and Post-Buckling Analysis of 3-

Dimensional Frames with Semi-rigid Connections, vol. 1, Proceeding of the Asian Pacific Conference on Computational Mechanics, December 1991, Hong Kong University, pp. 451-455.

251So, A.K.W and Chan, S.L., Geometrically Nonlinear Analysis of 3-Dimensional

Framed Structures using a Higher Order Element, Proceedings of the International Conference on Computational Engineering Science, 1991, ICES, pp.169-172.

252Chan, S.L., Nonlinear Finite Element Analysis of Box Sections with Local Buckling

Effects, Proceeding of the International Conference on Steel and Aluminium Structures (ICSAS), 1991, Singapore, pp.233-244.

253So, A.K.W., Ho, G.W.M. and Chan, S.L., User-Friendly Computer Analysis of Space

Trusses and Frames, 4th International Conference on Steel Structures and Space Frames, February 15-16, 1990, Singapore, pp.35-40.

254Chan, S.L. and Ho, G.W.M., A Comparative Study on the Nonlinear Numerical

Algorithms, 3rd International Conference on Advances in Numerical Methods in engineering, Theory and Applications, University College Swansea, U.K., January 7th-11th, 1990, pp.552-565.

255Ho, G.W.M., Chan, S.L. and Chan, W.M.K., Nonlinear Buckling Analysis of Beam-

Columns, Proceeding of the 4th International Colloquium on Structural Stability, Asian Session (ICSSAS'89), October, 1989.

256Chan, S.L., Numerical Strategy for Nonlinear Analysis of Framed Structures,

Proceedings of the 2nd East Asia-Pacific Conference on Structural Engineering and Construction, vol.2, Chiang Mai, Thailand, January, 1989, pp.1160-1167.

257Chan, S.L. and Kitipornchai, S., Inelastic Post-Buckling Behaviour of Tubular Struts,

International Conference on Steel and Aluminum Structures 87 , Department of Civil and Structural Engineering, University of Wales, Cardiff College, 1987.

33

258Kitipornchai, S. and Chan, S.L., Finite Element Analysis of Asymmetric Thin-walled

Beam-Columns, Proceeding of the 1st Asian Conference on Structural Engineering and Construction, Bangkok, Thailand, January, 1986, pp.118-129.

259Yau, C.Y. and G.W.M. Ho and Chan, S.L., Elastic-plastic large deflection analysis of

steel framed structures, Asia-Pacific Symposium on Advances in Engineering Plasticity and its Application, Hong Kong, 1992, pp. 763-770.

260Chan, S.L. and Chui, P.P.T., “Nonlinear Dynamic Analysis of Roof Trusses

connected by Rigid and Semi-rigid Joints”, Fourth International Conference on Space Structures, 6th September 1993, pp.406-412.

261Chan, S.L. and Kitipornchai, S., Ultimate Strength of Geometrically Imperfect Angle

Columns, Structural Stability Research Council meeting, April, 1993.

262Chui, P.P.T., Zhou, Z.H., and Chan, S.L., Second order analysis of roof truss and frame, Proceedings of International Symposium on Structures and Foundations in Civil Engineering, 1994, pp.167-176.

263Peng, J.L., Kung, C.H. and Chan, S.L., “Investigation of load-carrying capacity of

double-layer falsework”, International Conference on Structural Stability and Dynamics, 7-9 December 2000, Organised by National Taiwan University, proceeding pp.219-224.

264Chan, S.L. and Gu, J.X., “Snap-through analysis of toggle frame using software

package, NIDA, by 1 element per member”, Structural Failure and Plasticity, 7th International Symposium on Structural Failure and Plasticity, Implast 2000, 4-6th October 2000, Melbourne, Australia, Pergamon, pp. 787-794.

265Chan, S.L., Fang, L.X. and Wong, Y.L., “Strength analysis of a proposed benchmark

6-storey steel-concrete composite frames”, First International Conference on Steel and Composite Structures, Pusan, Korea, June 14-16, 2001, pp.327-334.

266‘Stability Analysis and Design of Steel Structures - using a second-order analysis

with section capacity check’, Proceedings for technical seminar on ‘Computer methods for economical and safe structural design’, 29th August 2003.

267淺穹頂的跳躍屈曲及其二階分析與設計,第三屆海峽兩岸及香港鋼及金屬結構技

術研討會會議刊物, 二零零三年十一月六日至七日, China, Hong Kong, Taiwan Steel Conference, 2003.

268‘Limitation of effective length method and codified second-order analysis and design’,

Proceedings for international symposium on ‘Worldwide Codified Design and Technology in Steel Structures’, 9th and 10th February 2004.

269Chan, S.L., C. Dymiotis and Zhou, Z.H., “Second-order analysis and design of steel

scaffold using multiple eigen-imperfection modes”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 321-330.

34

270Choy S.C. , Wong Y.L. and Chan, S..L., “Shear strength of prestressed concrete

encased steel beams with bonded tendons”, ”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 543-550.

271Gu, J.X., Chan, S.L. and Zhou, Z.H., “A higher order formulation for geometrically

nonlinear space beam element”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 1153-1160.

272Chau, K.T. and Chan, S.L., “Failure of a steel plate containing a circular rivet hole

with an emanating crack”, ”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 1017-1024.

273Li., J.J. and Chan, S.L., “Large deflection analysis of tensioned membrane structures

allowing for support flexibility”, ”, Proceeding, 3rd International Conference on Advances in Steel Structures, ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 1169-1176.

274Chan, S.L., S.H. Cho, “Design of steel frames using calibrated design curves for

buckling strength of hot-rolled members”, ”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 1193-1120.

275Chung, K.F., Yu W.K. and Chan, S.L. “Mechanical properties and engineering data

of structural bamboo”, Proceedings of International Seminar,” Bamboo scaffolds in Building Construction”, Hong Kong, May, 2002, pp.1-23.

276Chung, K.F., Yu W.K. and Chan, S.L. , “Practical design of bamboo scaffolds”,

Proceedings of International Seminar “Bamboo scaffolds in building construction”, Hong Kong, May, 2002, pp.65-88.

277Yu, W.K., Chung, K.F. and Chan, S.L. , “Column buckling in structural bamboo for

bamboo scaffolding”, Proceedings of 17th Australasian Conference on Mechanics of Structures and Materials, Gold Coast, Australia, June, 2002, pp. 555-560.

278Chung, K.F., Chan, S.L. and Wong W.F., “Numerical study of cold-formed steel

beam-column sub-frames with semi-rigid joints”, Proceedings of 17th Australasian Conference on Mechanics of Structures and Materials, Gold Coast, Australia, June 2002, pp. 569-573.

279Chung, K.F., Chan, S.L. and Yu W.K., “Recent development on bamboo scaffoldings

in building construction”, Proceedings of the International Conference on Advances in Building Technology, Hong Kong, December 2002, pp. 629-636.

280Chu, A.Y.T., Chan S.L. and Chung, K.F., “Stability of modular steel scaffolding

systems – theory and verification. Proceedings of the International Conference on Advances in Building Technology, Hong Kong., December, 2002, pp. 621-628.

35

281Yu, W.K., Chung, K.F. and Chan, S.L. , “Structural stability of modular steel scaffolding systems”, Proceedings of the 2nd International Conference on Stability and Dynamics, December 2002, Singapore, pp. 418-423.

282Law, S.S., Wu, Z.W., and Chan, S.L., “Frictional joints in dynamic analysis of a

portal frame”, ”, Proceeding, 3rd International Conference on Advances in Steel Structures ICASS’02, Elsevier, vol. 1, 15-17 December, 2002 , pp. 913-922.

283Chan, S.L., “Snap-Through Analysis and Design of Shallow Roofs with Special

consideration of Imperfections”, Semi-plenary session, The Second International Conference on Advances in Structural Engineering and Mechanics (ASEM'02) Busan Convention Center, 21-23 August 2002, Busan(Pusan), Korea. http://femlab.kaist.ac.kr/asem02/asemain.htm

284Chan, S.L. and Feng, L.X. “Advanced second-order and modified first-order analyses

for design of 2-bay portals”, Proceedings in Advances in Structures, edited by Hancock, GJ, Bradford, MA, Wilkinson, TJ, Uy, B. and Rasmussen, KJR, 2003, Sydney.

285Chan, S.L., ‘An Application of the Second-order P-- Analysis to Design of Long-

span Steel Structures’, Proceedings for technical seminar on ‘Construction, Analysis and Design of Light-weight and Long-span Steel Structures’, 19th June 2004.

286Chu, AYT, Chan, S.L., Albermani, F. and Chung, K.F., “Experimental and numerical

studies of double storey scaffolds, Proceedings of “4th International Conference in Advances in Steel Structures 2005”, 13-15 June 2005, Shanghai, China, pp. 333-342.

287Chan, S.L., “Second-order codified P- analysis for design of long-span roofs

allowing for and imperfections”, Proceedings of “4th International Conference in Advances in Steel Structures 2005”, 13-15 June 2005, Shanghai, China, pp. 351-360.

288Iu, C.K., Zha, X.X. and Chan, S.L. “Fire analysis accounting for cooling effects”,

Proceedings of “4th International Conference in Advances in Steel Structures 2005”, 13-15 June 2005, Shanghai, China, pp. 1083-1090.

289Cho, S.H. and Chan, S.L., “Nonlinear analysis of angle trusses”, Proceedings of “4th

International Conference in Advances in Steel Structures 2005”, 13-15 June 2005, Shanghai, China, pp. 1439-1444.

290Chan, S.L., Fong, M. and Cho, S.H., “Design of angle trusses – linear and second-order analysis”, Proceedings, 5th European Conference on Steel and Composite Structures, 2008, Graz, Austria, vol. B, pp. 1647-1652.

291F. Xie, G.P. Shu and S.L. Chan, “The second-order amplifier of simply supported I-beam”, Steel Construction, vol.24, no.128, 2009, pp.185-190. (in Chinese)

292G.P. Shu, J. Feng and S.L. Chan, “Study of typing force method in U.K. steel work

design code”, Steel Construction, vol.24, no.128, 2009, pp.277-282. (in Chinese)

36

293 Liu, Y.P and Chan, SL “Nonlinear analysis and design of wall-framed structures”, International conference on steel concrete composite and hybrid structures, Leeds, edited by D. Lam, 8-10 July 2009, pp.75-682.

294 Fong, M. and Chan, SL, “second-order analysis and experimental tests on

shallow domes”, International conference on steel concrete composite and hybrid structures, Leeds, edited by D. Lam, 8-10 July 2009, pp.709-714.

295 Chan, S.L., Liu, Y.P. and Liu, S.W., “Structural design in the post-effective length era”, 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), January 26-28, 2011, Hong Kong SAR, China, p. 341.

296 Liu, Y.P. and Chan, S.L., “Modern design method using NIDA for scaffolding systems”, International Conference on Tubular Structures XIII, edited Ben Young, CRC Press, 15-17 December 2010, Hong Kong. pp.443-447.

297 Liu, Y.P. and Chan, S.L., “Second-order plastic hinge analysis for seismic and static design of building Structures”, Proceedings of the One-day Symposium 2nd Contemporary Seismic Engineering – 2011, pp. 71-98.

298 Chan, S.L. , Pang PTC and Chan, W.T., “Direct analysis of steel and composite structures”, Third International Symposium on Computational Mechanics, ISCM III-CSE II, National Taiwan University, December 5-7, 2011, Taipei, Taiwan, pp. 446-447.