fujitsu p42hha10 service manual

P42HHS10WP42HHA10WP-SU4H10W

C o p y P r o h i b i t e d

F U J I T S U G E N E R A L P r o p r i e t a r y

C O N T E N T S

IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SETTING SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

VIDEO MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

RGB MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

TROUBLESHOOTING USING LED AND OSD . . . . . . . . . . . . . . . . . . . 47

TROUBLESHOOTING FLOWCHART . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

VS AND Vd ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

GENERAL CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . 66

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71DISASSEMBLY .

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

TRANSPOR

VOLTAGE OF EACH CONNECTOR

TATION AND HANDLING RESTRICTIONS . . . . . . . . . . . 103

- 2 -

IMPORTANT INFORMATION

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THISPRODUCT TO RAIN OR MOISTURE.

Please use a screen saver to prevent burning of an after-image on the screen.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your

personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.

In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation,

use and service. Please read these "Important Safeguards" carefully before use.

Read all the safety and operating instructions before operating the unit.

Retain the safety and operating instructions for future reference.

Adhere to all warnings on the unit and in the operating instructions.

Follow all operating instructions.

Unplug the unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Do not use attachments not recommended by the manufacturer as they may be hazardous.

Do not use the unit near water. Do not use the unit immediately after moving it from a low temperature to a high

temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.

Do not place the unit on an unstable cart, stand, or table. The unit may fall, causing serious injury to a child or adult, and

serious damage to the unit. Mount the unit according to the manufacturer's instructions, using the mount recommended by

the manufacturer.

When the unit is used on a cart, avoid quick stops, excessive force, and uneven

surfaces which may cause the unit and cart to overturn, damaging the unit or

causing possible injury to the operator.

When transporting by car, place the unit as shown in the figure.

Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation and protect the unit from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the unit

on a bed, sofa, rug, or similar surface. The unit should not be placed in a built - in installation such as a bookcase or rack

unless proper ventilation is provided and the manufacturer's instructions are adhered to.) For proper ventilation, separate

the unit from other equipment, which may obstruct ventilation. Keep the unit at least 10cm from other equipment.

Operate only with the type of power source indicated on the label. If you are not sure of the type of power supply to your

home, consult your dealer or local power company.

This unit is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you cannot insert the plug

into the outlet, have an electrician install the proper outlet. Do not defeat the safety purpose of the grounded plug.

Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay

particular attention to cords at doors, plugs, receptacles, and where they exit from the unit.

For added protection during a lightning storm, or when the unit is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the cabling. This will prevent damage to the unit by lighting and power line

surges.

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in fire or

electric shock.

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-circuit

parts that could result in a fire or electric shock. Never spill liquid of any kind onto the unit.

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages and

other hazards. Have all service done by qualified service personnel.

Unplug this unit from the wall outlet and have it serviced by qualified service personnel in the following cases:

a) If the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen onto the unit.

c) If the unit has been exposed to rain or water.

d) If the unit does not operate normally by following the operating instructions. Adjust only those controls that are

covered by the Operation Manual, as improper adjustment of controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to normal operation.

e) If the unit has been dropped or damaged in any way.

f) A distinct change in performance indicates that service is required.

When required, be sure the service technician uses replacement parts specified by the manufacturer or parts with the

same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Upon completion of any service of repairs, ask the service technician to perform safety checks to determine that the

unit is in proper operating condition.

Place the unit more than one foot away from heat sources such as radiators, heat registers, stoves, and other devices

(including amplifiers) that produce heat.

When connecting other devices such as VCR's and personal computers, turn off the power to this unit to protect

against electric shock.

Do not place combustibles such as cloth, paper, matches, aerosol cans or gas lighters that prevent special hazards

when overheated behind the cooling fan.

Use only the accessory cord designed for this unit to prevent shock.

The power supply voltage rating of this unit is AC100-240V, but the attached power cord conforms to the following

power supply voltage. Use only the Power Cord designated by our dealer to ensure Safety and EMC.

When used with other power supply voltages, the power cable must be changed.

Consult your local dealer.

Power Cord

Power supply voltage : AC 100 - 125 V AC 200 - 240 V AC-240V(SAA TYPE)

- 3 -

- 4 -

SPECIFICATIONS

Power requirement110-240V, 50/60Hz110-240V, 50/60Hz

4.3A-1.8A0.4A

PDP UNIT

Current drainSELECTOR UNIT

SELECTOR UNITPDP UNIT

Display panelScreen size 92.2(W) X 52.2(H) [cm]

UB type

36.3(W) X 20.6(H) [inch]Aspect ratio 16 : 9Number of pixels 1,024(H) X 1024(V) pixelsPixel pitch 0.90mm X 0.51mmContrast ratio 1000 : 1Luminance 1000 cd/m2Viewing angle Max. 160 degrees

Input/Output Terminals ofPDP unit

Input/Output Terminals ofSELECTOR unit

DVI input DVI-D terminal (HDCP)Differential Input 0.5 10%(RXC , RX0 , RX1 , RX2 )

Display frequency Horizontal : 33.75MHzVertical : 60HzDot clock : 40.5MHz

Digital(optical) audio input-27dB to -14.5dBLevel terminal10W+10W (L/R), 6

Effective max.output

Optical Input

1.0V /75Video input RCA terminal

S terminalY signal : 1.0V /75P-P

P-P

C signal : 0.286V /75P-P

Three RCA terminals(one system)

Component video input

Video input (E model)

Digital RGB1 input

Analog RGB2/RGB3 input

mD-sub : 15pin(3 row type)

SYNC signal : TTL level

DVI-D terminal (HDCP)

SCART terminal1.0V /75VideoY signal : 1.0V /75C signal : 0.286V /75

S video

G : 0.7V /75RGB

8 memories (each RGB1,2,3)User set mode

Display frequency

Digital RGB1 output

Analog audio input

Digital(optical) audioinput

Digital(optical) audiooutput

for Displayfor audio amp

PDP UNIT

PDP UNIT

PDP UNIT

SELECTOR UNIT

SELECTOR UNIT

SELECTOR UNIT Power cordRemote controllerBatteries (Type AA x 2)

Optical Input

Optical Input

-24dB to -14.5dB

Two RCA terminals(one system)500mVrms/22K

DVI-D terminal (HDCP)

Horizontal : 15.63 to 80.0MHzVertical : 50.0 to 120HzDot clock : 50MHz Max.

XGA 68MHz

-21dB to -15dB-21dB to -15dB

Environment (Operating)Temperature 0 to 40Relative humidity 20 to 80%Pressure 800 to 1,114 hPa

AccessoriesUser's manual

User's manual (only E model)

Power cordFerrite core (2)System cable (Video)System cable (Audio)

S video input

Color system NTSC/PAL/SECAM/N-PAL/M-PAL/4.43NTSC/PAL60

Display colors 16.7 million (256 each for R.G.B.)

Outer dimensionsWidth : 103.7cm (40.8 inch)Height : 64.2cm (25.3 inch)Depth : 8.5cm (3.3 inch)Width : 43.0cm (16.9 inch)Height : 9.5cm (3.7 inch)Depth : 37.0cm (14.6 inch)

Net weight28.5kg4.5kg

Y : 1.0V /75P-PPb/B-Y : 0.7V /75P-PPr/R-Y : 0.7V /75P-P

P-P

P-P

P-P

P-P

+

Differential Input 0.5 10%+

+ + + +

Differential Input 0.5 10%(RXC , RX0 , RX1 , RX2 )

++ + + +

(RXC , RX0 , RX1 , RX2 )+ + + +

Video : 0.7V /75P-P

B : 0.7V /75P-PR : 0.7V /75P-P

Model : P42HHS10W/E

- 5 -

EN55013EN55020

20011994

OptionsStand P-TT4200Wall mounting unit P-WB4200

P-CT4200

P-SP4200

0 to 15 mounting angle

0 to 15 mounting angleHanging unit

SpeakerP-ST4200Speaker stand

Standards

P42HHS10WSP42HHS10ES

P-SU4H10WSP-SU4H10ES

ASSafety : IEC60065 IEC60065EMC : AS/NZS 3548 AS/NZS 1053

EN60065 CE

Safety: EN60065

UL,CSASafety:UL6500 UL6500

C-UL C-ULEMC: FCC Part15 Class B FCC Part15 Class BICES-003 Class B ICES-003 Class B

EMC : EN55022EN61000-3-2 1995EN61000-3-3, 1995EN55024 1998

1998

EN61000-4-2, 1995EN61000-4-3, 1996EN61000-4-4, 1995EN61000-4-5, 1995EN61000-4-6, 1996EN61000-4-8, 1993EN61000-4-11,1994

- 6 -

Power requirement 110-240V, 50/60Hz4.4-1.9ACurrent drain

Display panelScreen size 92.0(W) X 51.8(H) [cm]

UB type

36.2(W) X 20.4(H) [inch]Aspect ratio 16 : 9Number of pixels 1,024 (H) X 1024 (V) pixelsPixel pitch 0.90mm X 0.51mm

Contrast ratio P42HHA10 1000 : 1 (typ.)Luminance 1000 cd/m (ryp.)Viewing angle Max. 160 degrees

2

EN55022 A1/A2Class BEN61000-3-2, 1995EN61000-3-3, 1995EN55024 1998EN61000-4-2, 1995EN61000-4-3, 1996EN61000-4-4, 1995EN61000-4-5, 1995EN61000-4-6, 1996EN61000-4-8, 1993EN61000-4-11, 1994

Input TerminalsVideo input BNC connector

1.0VP-P /75

S video input S terminalY signal:1.0VP-P /75C signal:0.286VP-P /75

Component Three BNC terminalsvideo input Y : 1VP-P /75

Pb /B-Y: 0.7VP-P /75Pr /R-Y: 0.7VP-P /75

RGB 2 input mD-sub:15pin (3 row type)Video : 0.7VP-P /75SYNC signal : TTL level

RGB 3 input BNC terminal x 5R: 0.7VP-P/75G: 0.7VP-P/75B: 0.7VP-P/75H: TTL level or 0.3VP-P /75V: TTL level or 0.3VP-P /75

User set mode 8 memories (each RGB1,2,3)Display frequency Horizontal :15.63 to 80.0MHz

Vertical : 50.0 to 120HzDot clock:50MHz Max

XGA 68MHz Max

RS-232C D-sub 9 pin terminal

Color system NTSC/PAL/SECAM/N-PAL/M-PAL/4.43NTSC/PAL60

Display colors 16.7 million (256 each for R.G.B.)

Audio input 2 pin terminals(three system)500mVrms/22k

Effective max. Level terminal 20W+20W (L/R), 4output

Dimensions Width : 103.5cm (40.7 inch)Height: 64.2cm (25.2 inch)Depth : 8.5 cm ( 3.3 inch)

Net weight 28.5kg

Environment (Operating)Temperature 0 to 40 CRelative humidity 20 to 80%Pressure 800 to 1,114 hPa

Accessories User's manualRemote controllerBatteries (Type AA x 2)Power cordFerrite core (2)

OptionsStand P-TT4200Wall mounting unit

P-WB4200mounting angle

mounting angle

0 to 15

Hanging unit

Speaker P-SP4200Speaker stand P-ST4200

P-CT4200

StandardsP42HHA10WP42HHA10E

ASSafety : I60065 A1/A2/A3/A4 I60065 A1/A2/A3/A4EMC : AS/NZS 3548 AS/NZS 3548

EN60065 1992A1 1993A2 1993A3 1995A4 1997

CESafety: EN60065 1992

A1 1993A2 1993A3 1995A4 1997

UL,CSASafety:UL6500 UL6500

CSA C22.2 No. CSA C22.2 No.EMC: FCC Part15 Class A FCC Part15 Class BICES-003 Class A ICES-003 Class B

EMC : EN55022 A1/A2Class AEN61000-3-2, 1995EN61000-3-3, 1995EN55024 1998EN61000-4-2, 1995EN61000-4-3, 1996EN61000-4-4, 1995EN61000-4-5, 1995EN61000-4-6, 1996EN61000-4-8, 1993EN61000-4-11,1994

0 to 15

RGB 1 input 24Pin DVI-D (HDCP) Differential Input 0.5V 10%(RXC , RX0 , RX1 , RX2 )

++ + + +

Model : P42HHA10W/E

SETTING SIGNALS

- 7 -

This display can store parameter settings for eight additional signals for RGB. To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters.When you finish, the settings will be automatically stored.

FACTORY SET SIGNALS (RGB MODE)

Main corresponding signals (RGB mode)

* With some input signals, Out of range may appear even when the horizontal and vertical frequencies are within their permissible ranges. Makesure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.

640 x 480 31.47 59.94 VGA

640 x 480

640 x 480

37.50 75.00 VGA 75 Hz

43.27 85.01 VGA 85 Hz

720 x 400 31.47 70.09 400 lines

800 x 600 37.88 60.32 SVGA 60 Hz

800 x 600

800 x 600

46.88 75.00 SVGA 75 Hz

53.67 85.06 SVGA 85 Hz

1024 x 768

48.36 60.00 XGA 60 Hz1024 x 768

1024 x 768

1024 x 768

60.02

68.68

75.03

84.99

XGA 75 Hz

XGA 85 Hz

1280 x 1024 63.98 60.02 SXGA 60 Hz

1280 x 1024 79.98 75.03 SXGA 75 Hz

1600 x 1200 75.00 60.00

106.25 85.00 UXGA 85 Hz

UXGA 60 Hz

1600 x 1200

1360 x 768

848 x 480 31.02 60.00

852 x 480 31.72

47.71

59.97

60.01

720 x 485 15.73 59.94 60 fields

720 x 575 15.63 50.00 50 fields

Signal DVD-IDisplay (dots x lines) Horizontal frequency (kHz) Vertical frequency (Hz)

- 8 -

Horizontalfrequency (kHz)

Verticalfrequency (Hz)

Signal

15.73 SDTV 480i

15.63 SDTV 576i

31.47 SDTV 480p

31.25 SDTV 576p

45.00 HDTV 720p

37.50 HDTV 720p

33.75 HDTV 1,080i

28.13 HDTV 1,080i

FACTORY SET SIGNALS (Component video mode)

Pin No. Input signal Pin No. Input signal

1 Red 9

2 Green 10 Ground

3 Blue 11

124

5 Ground 13 Horiz. sync

6 Ground 14 Vert. sync

7 Ground 15

8 Ground Outer side Ground

Horizontalfrequency (kHz)

Verticalfrequency (Hz)

Signal

15.73 NTSC

15.63 PAL

15.63 SECAM

15.63 PAL 60

15.63 N-PAL

15.73 M-PAL

15.73 4.43 NTSC

FACTORY SET SIGNALS (Video, S-video mode)

The dedicated graphics card is optional.In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction andinterpolation. Also note that on-screen information is also displayed in reduced size." Out of range" appears if the display receives a signal whose characteristic does not fall within the display'spermissible range.You can check the input signals with "Information" on the OTHERS Menu screen.

The sync switch (TTL/ANALOG switch) is onthe rear of the 13-pin horizontal sync and14-pin vertical sync terminals.

Pin No.

RGB INPUT TERMINAL

Pin No. No. signal

1 DCD (Data Carrier Detect)

2 RD (Receive Data)

3 TD (Transmit Data)

4 DTR (Data Terminal Ready)

5 GND (Ground)

6 DSR (Data Set Ready)

7 RTS (Request To Send)

8 CTS (Clear To Send)

9 RI (Ring Indication)

RS-232C INPUT TERMINAL

DVI-D INPUT TERMINAL

50.00

59.52

59.95

59.94

50.00

50.00

59.94

50.00

60.00

50.00

60.00

50.00

59.94

50.00

59.94

- 9 -

SCART TERMINAL

26101418

37111519

48121620

159131721

Pin No. Input Signal

1

2 Right audio

3

4 Audio ground

5 Blue ground

6 Left audio

7 Blue


8

9 Green ground

10

11 Green

12

13 Red ground

14


15 Red/chrominance

16

17

18 Composite video ground

19

20 Composite video/Y

21 Ground

Selector

3-pin outlet

3-pin outlet

DisplaySpeaker (optional)

CONNECTION

Model : P42HHS10W/E

BASIC SYSTEM CONNECTIONS

1. Connect the following items to the selector and the display

Selector and display

Connect these two with the provided system connection cable. (For details, see the page on the right.)a

Speakers

For how to connect speakers, see the instructions provided with the speakers.

2. Connecting the power cord

Connect the power plug of the display and selector power cords to a 3-pin outlet.

- 10 -

- 11 -

AUDIOINPUT

VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2

DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEOVIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S

Rear side of display

Left speaker cable Right speaker cable

RedBlack

Display input terminalPower input

Audio

To AC outlet

Rear side of selector

terminalPictureterminal

CONNECTING THE DISPLAY AND THE SELECTOR

Model : P42HHS10W

Remotecontrol

Display Speaker (optional)Speaker

Selector

VCR

DVD player

Amplifier

Satellite tuner

Video camera

Videogame machine

PC

EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS

Model : P42HHS10W/E

- 12 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S

To video output

To video input


To S-videooutput

To audio outputs

To audio inputs

To S-video input

VCRConnect the video signal cable to either the S-video input terminal or the video input terminal.

- 13 -

Model : P42HHS10W

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S


To digital audio input

To analog audio input

To analog audio output To digital audio output

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S


To S-videooutput

To componentvideo output

To video output

To audio outputs

To audioinputs To video input

To component video inputTo S-video input

DVD PLAYER

AMPLIFIER

Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.

Connect the audio signal cable to either the digital output or the analog audio output.The signal input as digital input is not output as analog audio.The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.In the case of outputs with another frequency, connect to an audio system (amplifier) .

If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

- 14 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S

To S-videooutput

To componentvideo output

To video output

To audio outputs

To audioinputs To video input

To component video input

To S-video input

SATELLITE TUNERConnect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

- 15 -

To S-video input

To video and audio outputs

To S-video output

To video and audio inputs

To S-video input

To video and audio outputs

To S-video output

To video and audio inputs

Front side of selector

VIDEO CAMERA

VIDEOGAME MACHINE

A video camera can conveniently be connected to the Video 3 input on the front side.Connect the video signal cable to either the S-video input terminal or the video input terminal.If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.

As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine.Connect the video signal cable to either the S-video input terminal or the video input terminal.Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on thescreen for an extended period, the brightness of that part of the screen may change and image burn-in may leavean after-image on the screen.If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to theS-video terminal.

Model : P42HHS10W/E

- 16 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S

PCAs the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.The PC can be connected to either the front side or the rear side, whichever is most convenient.

To RGB output (mD-sub)

To audio output

To audio input (mD-sub)To RGB3 input

When connecting to the front side of the selector

When connecting to the rear side of the selector

To RGB output (mD-sub)To audio output To audio

input

To RGB1 input(DVI-D)

To RGB2 input(mD-sub)

To RGB output (DVI-D)

- 17 -

Model : P42HHS10W

- 18 -

Model : P42HHS10E

AUDIOINPUT

VIDEO5 VIDEO6 RGB1 RGB2

DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART

Rear side of display

Left speaker cable Right speaker cable

RedBlack

Display input terminalPower input

Audio

To AC outlet


terminalPictureterminal

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART

To SCART output

To SCART input


VCR

Connect the video signal cable to the SCART terminal.

- 19 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART


To digital audio input

To analog audio input

To analog audio output To digital audio output

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART

To component videooutput

To audio outputs

To audio inputs

To componentvideo input


To SCART output

To SCART input

DVD PLAYER

AMPLIFIER

Connect the video signal cable to either the component video terminal or the SCART terminal.If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

Connect the audio signal cable to either the digital output or the analog audio output.The signal input as digital input is not output as analog audio.The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.In the case of outputs with another frequency, connect to an audio system (amplifier) .

- 20 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART

To SCART output

To To audio inputs

To audio outputs

To component videooutput


SCART input

SATELLITE TUNER

Connect the video signal cable to either the component video terminal or the SCART terminal.If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.


- 21 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART


To RGB output (mD-sub)

To audio output

To RGB output (mD-sub)To audio output To audio

input

To RGB1 input To RGB2 input(DVI-D) (mD-sub)

To RGB output (DVI-D)

To audio input (mD-sub)To RGB3 input

When connecting to the front side of the selector

When connecting to the rear side of the selector

- 22 -

- 23 -

Model : P42HHA10W/E


Remotecontrol


VCR

DVD player

Satellite tuner

PC

To S-video output

To video output

To audiooutputs

To audio inputs To S-video input To video input

VCR

Connect the video signal cable to either the S-video input terminal or the video input terminal.

Bottom of Display (Ex.: P42VHA10)

- 24 -

Model : P42HHA10W

To S-video outputTo component video output

To video output

To S-video outputTo component video output

To video output

To audiooutputs

To audio outputs

To audioinputs

To video input

Tocomponentvideo input

To S-videoinput

To audioinputs

To video inputTo S-videoinput



DVD PLAYER

SATELLITE TUNER

Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

- 25 -



To RGB output (DVI-D)To RGB output (mD-sub)

To audio output

To audio

To RGB2input(mD-sub)

inputTo RGB1 input(DVI-D)

- 26 -

An example of the underside of the display(with the P-TE1010E installed in the P42VHA10)

To video output

To S-video output

To audio output

To video inputTo S-video inputTo audio input

VCR

Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)

To SCART output

To SCART input


- 27 -

Model : P42HHA10E

DVD PLAYERConnect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)Connect the video signal cable to the component video input terminal, S-video input terminal, or thevideo input terminal. (When the P-TE1010E is installed.)If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

To SCART output

To component video output

To audio output

To audio input


To SCART input




To video output

To S-video output

To audio output

To audio input To S-video inputTo componentvideo input

- 28 -


To audio output

To audio input


To SCART output

To SCART input




To audio output

To S-video output

To video output

To audio inputTo componentvideo inputTo S-video input

To video input

SATELLITE TUNERConnect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)Connect the video signal cable to the component video input terminal, S-video input terminal, or thevideo input terminal. (When the P-TE1010E is installed.)If the component to be connected is equipped with component video output terminal, it is recommended to connect to thecomponent video terminal.

- 29 -


PC

As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.The PC can be connected to either the front side or the rear side, whichever is most convenient.


To audio output

To audio input

To RGB2

To RGB1 input(DVI-D)

input(mD-sub)

- 30 -

Remotecontrol


PC


- 31 -




To audio output

To audio input To RGB1 input(DVI-D)

To RGB2input(mD-sub)

- 32 -

[MODE]Input mode selector button

Power indicator lamp

Remote control signal receiver

Input mode selector button[MODE]

Switches between picture input modes.VOL + buttonVOL - buttonAdjusts the sound volume.Wide screen selector button [WIDE]Switches the screen over to a desired wide screen.ON/OFF buttonTurns the power "ON" and "OFF (standby state)".

(Right section)

Control Panel (Right side of display)

DISPLAY SECTION FRONT

This lamp shows the state of the power supply.Lit (red): Stand-byLit (green): Power ONLit (orange): Power saving (DPMS: Power saving

Flashing (red): Malfunction (Flashes differently dependingfunction) mode ON

on the type of malfunction.)

Receives signals from the remote control.

PART NAMES AND FUNCTIONS

- 33 -

power switchWhen pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and thepower can be turned "ON" or "OFF" by the remotye control or on the control panel of the display. When passed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state.Display input (picture) terminalConnect this terminal to the display output terminal on the tuner using the special cable provided.Display input (audio) terminalConnect this terminal to the display output terminal on the tuner using the special cable provided.External speaker output terminal (EXT SP)Connect this terminal to the optionally available speaker.When connecting a cable, attach a ferrite core to the cable.*See the speakerer instruction manual for more information. Power input terminalConnect this terminal to the power cable supplied with the display.

DISPLAY SECTION LOWER PART

Model : P42HHS10W/E

- 34 -

/I power switchWhen pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the powercan be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state,the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied.RS-232C terminal (RS-232C)This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.When connecting a cable, attach a ferrite core to the cable.RGB1 input terminal (RGB1 INPUT/DVI-D)Connect this terminal to the PC's display (digital RGB) output terminal.*The connection cable No.88741-8000 made by molex Inc. is recommanded.RGB2 input terminal (RGB2 INPUT/mD-sub)Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.Power input terminalConnect this terminal to the power cable supplied with the display.When connecting a cable, attach a ferrite core to the cable.External speaker output terminal (EXT SP)Connect this terminal to the optionally available speaker.When connecting a cable, attach a ferrite core to the cable.*See the speaker instruction manual for more information.Audio1 input terminal (AUDIO1 INPUT)Audio2 input terminal (AUDIO2 INPUT)Audio3 input terminal (AUDIO3 INPUT)Connect this terminal to the sound output terminal of your VCR, etc.

Bottom


Model : P42HHA10W

- 35 -

Component video input terminal (VIDEO3 INPUT)Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.S-Video input terminal (VIDEO2 INPUT)Connect this terminal to the S-video output terminal of your VCR.Video input terminal (VIDEO1 INPUT)Connect this terminal to the video output terminal of your VCR.Component video input terminal (VIDEO4 INPUT)Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

/I power switchWhen pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned"ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goesout and the display is placed in the "OFF" state where power is still partly supplied.RS-232C terminal (RS-232C)This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.When connecting a cable, attach a ferrite core to the cable.RGB1 input terminal (RGB1 INPUT/DVI-D)Connect this terminal to the PC's display (digital RGB) output terminal.*The connection cable No.88741-8000 made by molex Inc. is recommanded.RGB2 input terminal (RGB2 INPUT/mD-sub)Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.Power input terminalConnect this terminal to the power cable supplied with the display.When connecting a cable, attach a ferrite core to the cable.External speaker output terminal (EXT SP)Connect this terminal to the optionally available speaker.When connecting a cable, attach a ferrite core to the cable.*See the speaker instruction manual for more information.Audio3 input terminal (AUDIO3 INPUT)Audio2 input terminal (AUDIO2 INPUT)Audio1 input terminal (AUDIO1 INPUT)Connect this terminal to the sound output terminal of your VCR, etc.

+ RGB3 input terminal (RGB3 INPUT/BNC)Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.*When RGB3 input terminal is connected, Comp.video mode is not available.Component video input terminal (VIDEO4 INPUT)Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.*When Comp.video input terminal is connected, RGB3 mode is not available.RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 ))This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 .

TTL : Does not terminate. ANALOG (75 ): Terminates.

Bottom

VideoboardP-TE1000E type P-TE1010E type

Model : P42HHA10E

DISPLAY SECTION - LOWER PART

- 36 -

Video1 input terminal (VIDEO1 INPUT/P-TE1000E)Connect this terminal to the SCART terminal of your VCR or DVD, etc.S-Video input terminal (VIDEO2 INPUT/P-TE1010E)Connect this terminal to the S-video output terminal of your VCR.Video input terminal (VIDEO1 INPUT/P-TE1010E)Connect this terminal to the video output terminal of your VCR.Component video input terminal (VIDEO3 INPUT/P-TE1010E)Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.

/I power switchWhen pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the powercan be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state,the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied.RS-232C terminal (RS-232C)This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.When connecting a cable, attach a ferrite core to the cable.RGB1 input terminal (RGB1 INPUT/DVI-D)Connect this terminal to the PC's display (digital RGB) output terminal.*The connection cable No.88741-8000 made by molex Inc. is recommanded.RGB2 input terminal (RGB2 INPUT/mD-sub)Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.Power input terminalConnect this terminal to the power cable supplied with the display.When connecting a cable, attach a ferrite core to the cable.External speaker output terminal (EXT SP)Connect this terminal to the optionally available speaker.When connecting a cable, attach a ferrite core to the cable.*See the speaker instruction manual for more information.Audio3 input terminal (AUDIO3 INPUT)Audio2 input terminal (AUDIO2 INPUT)Audio1 input terminal (AUDIO1 INPUT)Connect this terminal to the sound output terminal of your VCR, etc.

Bottom


- 37 -

RGB3 input terminal (RGB3 INPUT/BNC)Connect this terminal to the PCs display (analog RGB) output terminal.RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 ))This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 .

TTL : Does not terminate.ANALOG (75 ) : Terminates.

Power indicator lampThis lamp shows the state of the power supply.

Lit (red): Stand-byLit (green): Power ONLit (orange): Power saving (DPMS: Power saving function) mode ONFlashing (red): Malfunction

Remote control signal receiverReceives signals from the remote control.POWER buttonTurns the power "ON" and "OFF".* Even when the power is "OFF", some parts are still powered.Video3, S-video input terminal *Connect this terminal to the S-video output terminal of your VCR, etc. Video3, video input terminal *Connect this terminal to the video output terminal of your VCR, etc.Audio input terminals (L/R)These are the audio input terminals for the Video3 and RGB3 terminals.Input the audio for the video to be seen here.RGB3 input terminalConnect this terminal to your PC's mD-sub output terminal.

* On selecting the video input format

SELECTOR SECTION FRONT

Model : P42HHS10W/E

- 38 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR


mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

S S S

Audio input terminalsInput audio through the terminals corresponding to the used video input terminals.The digital input terminals can be matched as desired with the remote control.Audio output terminalsFor use when the sound from an audio system (amplifier) is used.Video1 input terminalVideo2 input terminalVideo4 input terminalConnect this terminal to the component video output terminal, S-video output terminal, or video output terminal ofyour VCR or DVD, etc.Video5 input terminalVideo6 input terminalConnect this terminal to the component video output terminal of your DVD, etc.RGB1 input terminalConnect this terminal to the monitor (DVI-D) output terminal of your PC.RGB2 input terminalConnect this terminal to the monitor (mD-sub) output terminal of your PC.Display output terminals (Picture/Audio)Connect these terminals to the picture input terminal and audio input terminals on the display.Power input terminalConnect this terminal to the power cable supplied with the display.

SELECTOR SECTION REAR

Model : P42HHS10W

- 39 -

AUDIOINPUT


DIGITAL1 DIGITAL2

VIDEO1

PICTUREINPUT

DIGITAL

AUDIOOUTPUT

DISPLAY OUTPUT

VIDEO2 VIDEO4

mD-sub

PICTURE AUDIO

VIDEO5 VIDEO1

Y PB/CB PR/CR

COMPONENT VIDEO

Y PB/CB PR/CR

COMPONENT VIDEORGB2

RGB1DVI

SCART SCARTSCART

Audio input terminalsInput audio through the terminals corresponding to the used video input terminals.

* The digital input terminals can be matched as desired with the remote control.

Audio output terminalsFor use when the sound from an audio system (amplifier) is used.Video1 input terminalVideo2 input terminalVideo4 input terminalConnect this terminal to the SCART terminal of your VCR or DVD, etc.

Video5 input terminalVideo6 input terminalConnect this terminal to the component video output terminal of your DVD, etc.

RGB1 input terminalConnect this terminal to the monitor (DVI-D) output terminal of your PC.RGB2 input terminalConnect this terminal to the monitor (mD-sub) output terminal of your PC.Display output terminals (Picture/Audio)Connect these terminals to the picture input terminal and audio input terminals on the display.

Power input terminalConnect this terminal to the power cable supplied with the display.

Model : P42HHS10E

SELECTOR SECTION REAR

- 40 -

button Switches between power ON and standbystate.

DISPLAY OFF button For showing on-screen-information.PICTURE MODE button Switches the picture mode.AUDIO IN button Selects the input audio.Video input mode selector button[VIDEO 1 - 6] Selects VIDEO 1 - 6RGB input mode selector button[RGB 1 - 3] Selects RGB 1 - 3.Menu button [MENU] Use this button to display a desired menufor adjusting the picture.Enter button [ENTER] Press this button to finalize the selection ofa desired menu or option within a menu.

STILL button Displays a still picture during viewing.MUTE button Temporarily mutes the sound.PICTURE MEMORY button Recalls the PICTURE MEMORY.WIDE button Switches the screen over to a desired widescreen.

OFF-TIMER Sets when the power should be turned of f.Volume adjustment buttons[VOL +/- ] Adjust the volume.Press the + button to increase the volume.Press the - button to reduce the volume.

Adjustment buttons [ / / / ]

Use these buttons to scroll through optionsin a menu.

REMOTE CONTROL

Model : P42HHS10W/E

- 41 -

button Switches between power ON and standbystate.

DISPLAY OFF button For showing on-screen-information.

PICTURE MODE button Switches the picture mode.

RGB input mode selector button[RGB 1 - 2] Selects RGB 1 - 2.

Video input mode selector button[VIDEO 1 - 3] Selects VIDEO 1 - 3.

Menu button [MENU] Use this button to display a desired menufor adjusting the picture.Enter button [ENTER] Press this button to finalize the selection ofa desired menu or option within a menu.

MUTE button Temporarily mutes the sound.

PICTURE MEMORY button Recalls the PICTURE MEMORY.

WIDE button Switches the screen over to a desired widescreen.

RGB3/VIDEO4 input mode selectorbutton [RGB3/VIDEO4] Selects RGB3 or VIDEO4.

Volume adjustment buttons[VOL +/ - ] Adjust the volume.Press the + button to increase the volume.Press the - button to reduce the volume.

Adjustment buttons [ / / / ]Use these buttons to scroll through optionsin a menu.

Model : P42HHA10W/E

REMOTE CONTROL

- 42 -

- 43 -

VIDEO MODE ADJUSTMENT

MENU

ENTERVIDEO 1

Normal

Wide 1

Wide 2

Position Horizontal "-"

Horizontal "+"

Vertical "-"

Vertical "+"

Size Width "-"

Width "+"

Height "-"

Height "+"

Zoom 1

Zoom 2

PICTURE

POSITION/SIZE

REMOTE CONTROLLER

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

RGB 1

RGB 2

RGB 3

VOL. +

VOL. -

STILL

MUTE

DISPLAY

PICTURE MODE DynamicFineReal 1Real 2Static

PICTURE MEMORY

AUDIO IN

OFF-TIMER

WIDE

DynamicFineReal 1Real 2Static

OffMin.Std.Max.

OffMin.Mid.Max.

Horizontal {-30 to +30 (Comp. video -16 to +16)}

{-3 to +12 (Comp. video -2 to +16)}

{-6 to +6}

{-6 to +6}

{-10 to +10}

{-3 to +12 (Comp. video -2 to +16)}

{-7 to +7 (Zoom -15 to +15) (Comp. video -16 to +16)}Vertical

Off30min.60min.90min.120min.

Analog AudioDigital Audio 1Digital Audio 2

Contrast {-30 to +30}

{-30 to +30}

{-16 to +16}

{-60 to +60}

{-60 to +60}

Brightness

Color

Tint

Sharpness

Picture Mode

Precision Setting

Picture Memory

Noise Reduction

NormalAutoWide 1Wide 2Zoom 1Zoom 2

FEATURES

Function

On Screen Menu

Input Terminal

Others

AUDIO

Luminance {40 to 100%}

{-15 to +15}

{-3500 to +3500}

Can be set when Fine isselected as the Picture Mode.Black Level

Colour Temp.

User Color Temp.

Video Input 1

Video Input 2

Video Input 3

Video Input 4

DVI Input

Power saver

OSD

Language

Name Select

24 Frame Mode

Jaggies Filter

FACTORY DEFAULT

Treble

Bass

Balance

Loudness

Load

Save

Execute

Position

Adjustment* Clamp Position* *Only Comp. Video{-8 to +8}

Size WidthHeight

YesNo

Default

White Screen

YesNo

YesNo

Default

Auto Off - UNTOUCH

Auto Off - NO SIG.

Red {0 to 255}{0 to 255}{0 to 255}

GreenBlue

OnOff

DVI 1DVI 2

OnOff

OnOff

OnOff

ModeFreq. Scan ModeInput SignalFreq.

OnOff

On(OSD : bright)On(OSD : dark)Off

}

Exhibition Mode

Illumination

Information

Memory 1Memory 2Memory 3Memory 4Memory 5Memory 6Memory 7Memory 8

EnglishDeutschEspanolFrancaisItalianoPortugues

Video 1

Video 2

Video input

Video Format

Video 3

Video 4

Video 5

Video 6

Video 1DVD 1DVD 2VCR 1VCR 2GAMECamcorderSTBSatelliteCable TV

Load

Save

Memory 1Memory 2Memory 3Memory 4Memory 5Memory 6Memory 7Memory 8

~

~

fujitsu p42hha10 service manual

Documents