fuel management system - romteck.com for fms v1.0.pdf · the fms system with smart rfid tags...
TRANSCRIPT
The Romteck Radio Frequency Identification (RFID) reader can provide a method of
long range identification and authentication of various plant and equipment, such as
Vehicles, Gensets, Lighting towers, pumps and more.
The FMS System with Smart RFID tags installed can obtain Engine Hours,
temperature or other sensor inputs from the equipment and pass that information back
to the Fuel Management System whilst refuelling.
ROMTECKROMTECK
FEATURESFEATURES ♦ Long Range - Up to 30 metres, if required depending on configuration.
♦ Flexible - Service vehicles or Fixed fuel farm and bowser systems.
♦ Large coverage - The Romteck RFID system utilises multiple patch antennas
providing 360° coverage around service vehicle or bowsers.
♦ Independent - The RFID tag does not require power from the vehicle to obtain or
pass engine hour information to the reader. This allows a fully isolated vehicle or
Genset to still be read by the FMS system.
♦ Simple Installation - The tags can be screw mounted or glued to the equipment.
The Engine Hours pickup, is a simple two wire connection.
Passive TagPassive Tag
Smart RFIDSmart RFID
Fuel Management System Fuel Management System
Smart TagSmart Tag
TagTag
TAGSTAGS There are two types of RFID tags available.
♦ The “Smart Tag” with a clock, logging memory and sensor
inputs.
♦ The “Passive Tag” works in a similar way to an ID card and
contains a unique identification number.
RFID ReaderRFID Reader
RFiD StandardRFiD Standard • ISO18000-6C (EPC Class 1 and 3) Gen.2
• 860 to 960MHz
PhysicalPhysical • Temperature range of –40 - 125°c
• IP67 (Waterproof)
• Dimensions - 160mm x 50mm x 22mm
• Intrinsically Safe, approval pending
InterfacesInterfaces • 4 Digital Inputs
• or 2 Analog Inputs
• or 1 Digital and 1 Analog Input.
(depends on custom specifications)
Perth Office
Romteck Pty Ltd
37 Collingwood Street,
Osborne Park
Western Australia 6017
Tel: +61 (0)8 9244 3011
Fax: +61 (0)8 9244 2649
Email: [email protected]
Brisbane Office
Romteck Pty Ltd Unit 106 - 193 South Pine Road,
Brendale, QLD 4500
Tel: +61 (0)7 3889 8244
Fax: +61 (0)7 3889 7833
Mobile: +61 (0)410 979 420
Email: [email protected]
• Records - Engine Hours
• Records - Tag Temperature
• Industrial design - IP67 rated.
• Long Range up to 30 metres*
• Wide operating temperature range
RFID ReaderRFID Reader • Can support 4 zones or areas of coverage (simultaneously) via 4 Independent antennas.
• Can support other various tag standards such as ISO 18000-6C or 6B (optional)
• Adjustable power up to 1.4 watt transmit power
• 900MHz ISM band for Australia
Reader System SpecificationsReader System Specifications
System FeaturesSystem Features
Smart Tag SpecificationsSmart Tag Specifications Data LoggingData Logging
• On-board real-time clock
• Time stamp logging
• On-board temperature sensor
*Depending on tag model
Passive Tag SpecificationsPassive Tag Specifications RFiD StandardRFiD Standard • ISO18000-6C (EPC Class 1 and 3) Gen.2
• 860 to 960MHz
PhysicalPhysical • Temperature range of –40 - 125°c
• IP67 (Waterproof) and Intrinsically Safe
• Dimensions - 155mm x 32mm x 10mm