FTX-aggregatECO 375 TS/TL

10-1

5

ECO 375 TS ECO 375 TL

Elanslutning 1 x 230V +N +PE 10A, 50 Hz

FläktarØ175 mm.

Bakåtböjda skovlarØ146 mm.

Framåtböjda skovlar

Motor EC-motor med integrerad elektronik

Isoleringsklass B B

Kapslingsklass IP 54 IP 54

Varv 3740 varv/min 3168 varv/min

Upptagen effekt (max pr. motor)

85 W 170 W

Strömförbrukning 0,8 A 1,2 A

Mått (H x L x D) 596 x 595 x 895 mm

Vikt 40 kg

Kanalanslutning Ø160 mm

Beslag För väggmontage 6,5 mm hål

MotströmsvärmeväxlareFinns i både aluminium eller PET-plast

med temperaturintervall på -20°C till +50°C

Kondensavlopp Ø15 mm ABS Ø15 mm ABS

Filter G4-filter (till- och frånluft) - M5/F7-filter tillval

Ljudnivå45 dB(A)

vid 229 m3/h, 50 Pa40 dB(A)

vid 383 m3/h, 50 Pa

Energiklass A A

595

307,4

307,4

172

,2

278

143,5

161x 4

A1

2

3

4

600

944

DETAIL ASCALE 1 : 5

13

electronicConnection

179

5

6

7

8-9

10

11-12

Revision: 1

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

1Revision:

KgWeightDescription:

Part No.:

Page 1 off 1 A3

170.82

010630

ECO 375 R_1

General tolerance where no other written: ISO 2768-m Scale: 1:10

Revision Date:14-08-2015

Lokation:

Produkts: Energy ECO 375TRevised By:

TTH

ECO 375 TL ECO 375TSElectrical connection 1 x 230V +N +PE 10 A, 50 HzFans Ø146 mm forward curved blades Ø175 mm backward curved blades Motor EC motor with integrated electronicsInsulation class for fan BProtection class for fan IP 54Fan speed 3168 revolutions per minute 3740 revolutions per minuteAbsorbed power (max per motor) 170 W 85 WPower consumption for fan: 1.2 A 0.8 ADimensions (h x l x d) excl. duct connections 596x595x895 mm

HousingExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Duct connection Ø160 mm

FrontExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Wall mount Wall mounting plate with 6.5 mm holesCounterflow heat exchanger Aluminium or PET plastic (both types are available)Work area counterflow exchanger -20 °C to +50 °CCondensation drain 32 mm ABSFilters G4 filter (fresh air), G4 filter (exhaust air) – F7 accessory filterSound pressure level (LW) at 1 m 40 dB(A) @ 383 m3/h, 50 Pa 45 dB(A) @ 229 m3/h, 50 PaWeight 40 kgEnergy class A

Technical data

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

Dimensions diagram

Dimensions in mm.

1. Fresh air 2. Extract air 3. Exhaust air 4. Supply air 5. Heat exchanger 6. Supply air fan 7. Extract air fan 8. Filter fresh air 9. Filter exhaust air10. Electrical connection11. Condensation tray12. Condensation drain

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

595

307,4

307,4

172

,2

278

143,5

161x 4

A1

2

3

4

600

944

DETAIL ASCALE 1 : 5

13

electronicConnection

179

5

6

7

8-9

10

11-12

Revision: 1

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

1Revision:

KgWeightDescription:

Part No.:

Page 1 off 1 A3

170.82

010630

ECO 375 R_1

General tolerance where no other written: ISO 2768-m Scale: 1:10

Revision Date:14-08-2015

Lokation:

Produkts: Energy ECO 375TRevised By:

TTH

ECO 375 TL ECO 375TSElectrical connection 1 x 230V +N +PE 10 A, 50 HzFans Ø146 mm forward curved blades Ø175 mm backward curved blades Motor EC motor with integrated electronicsInsulation class for fan BProtection class for fan IP 54Fan speed 3168 revolutions per minute 3740 revolutions per minuteAbsorbed power (max per motor) 170 W 85 WPower consumption for fan: 1.2 A 0.8 ADimensions (h x l x d) excl. duct connections 596x595x895 mm

HousingExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Duct connection Ø160 mm

FrontExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Wall mount Wall mounting plate with 6.5 mm holesCounterflow heat exchanger Aluminium or PET plastic (both types are available)Work area counterflow exchanger -20 °C to +50 °CCondensation drain 32 mm ABSFilters G4 filter (fresh air), G4 filter (exhaust air) – F7 accessory filterSound pressure level (LW) at 1 m 40 dB(A) @ 383 m3/h, 50 Pa 45 dB(A) @ 229 m3/h, 50 PaWeight 40 kgEnergy class A

Technical data

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

Dimensions diagram

Dimensions in mm.

1. Fresh air 2. Extract air 3. Exhaust air 4. Supply air 5. Heat exchanger 6. Supply air fan 7. Extract air fan 8. Filter fresh air 9. Filter exhaust air10. Electrical connection11. Condensation tray12. Condensation drain

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

595

307,4

307,4

172

,2

278

143,5

161x 4

A1

2

3

4

600

944

DETAIL ASCALE 1 : 5

13

electronicConnection

179

5

6

7

8-9

10

11-12

Revision: 1

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

1Revision:

KgWeightDescription:

Part No.:

Page 1 off 1 A3

170.82

010630

ECO 375 R_1

General tolerance where no other written: ISO 2768-m Scale: 1:10

Revision Date:14-08-2015

Lokation:

Produkts: Energy ECO 375TRevised By:

TTH

ECO 375 TL ECO 375TSElectrical connection 1 x 230V +N +PE 10 A, 50 HzFans Ø146 mm forward curved blades Ø175 mm backward curved blades Motor EC motor with integrated electronicsInsulation class for fan BProtection class for fan IP 54Fan speed 3168 revolutions per minute 3740 revolutions per minuteAbsorbed power (max per motor) 170 W 85 WPower consumption for fan: 1.2 A 0.8 ADimensions (h x l x d) excl. duct connections 596x595x895 mm

HousingExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Duct connection Ø160 mm

FrontExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Wall mount Wall mounting plate with 6.5 mm holesCounterflow heat exchanger Aluminium or PET plastic (both types are available)Work area counterflow exchanger -20 °C to +50 °CCondensation drain 32 mm ABSFilters G4 filter (fresh air), G4 filter (exhaust air) – F7 accessory filterSound pressure level (LW) at 1 m 40 dB(A) @ 383 m3/h, 50 Pa 45 dB(A) @ 229 m3/h, 50 PaWeight 40 kgEnergy class A

Technical data

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

Dimensions diagram

Dimensions in mm.

1. Fresh air 2. Extract air 3. Exhaust air 4. Supply air 5. Heat exchanger 6. Supply air fan 7. Extract air fan 8. Filter fresh air 9. Filter exhaust air10. Electrical connection11. Condensation tray12. Condensation drain

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

595

307,4

307,4

172

,2

278

143,5

161x 4

A1

2

3

4

600

944

DETAIL ASCALE 1 : 5

13

electronicConnection

179

5

6

7

8-9

10

11-12

Revision: 1

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

1Revision:

KgWeightDescription:

Part No.:

Page 1 off 1 A3

170.82

010630

ECO 375 R_1

General tolerance where no other written: ISO 2768-m Scale: 1:10

Revision Date:14-08-2015

Lokation:

Produkts: Energy ECO 375TRevised By:

TTH

ECO 375 TL ECO 375TSElectrical connection 1 x 230V +N +PE 10 A, 50 HzFans Ø146 mm forward curved blades Ø175 mm backward curved blades Motor EC motor with integrated electronicsInsulation class for fan BProtection class for fan IP 54Fan speed 3168 revolutions per minute 3740 revolutions per minuteAbsorbed power (max per motor) 170 W 85 WPower consumption for fan: 1.2 A 0.8 ADimensions (h x l x d) excl. duct connections 596x595x895 mm

HousingExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Duct connection Ø160 mm

FrontExterior: Galvanised steel plate 0.7 mm powder coated

Interior: Neoprene/EPS

Wall mount Wall mounting plate with 6.5 mm holesCounterflow heat exchanger Aluminium or PET plastic (both types are available)Work area counterflow exchanger -20 °C to +50 °CCondensation drain 32 mm ABSFilters G4 filter (fresh air), G4 filter (exhaust air) – F7 accessory filterSound pressure level (LW) at 1 m 40 dB(A) @ 383 m3/h, 50 Pa 45 dB(A) @ 229 m3/h, 50 PaWeight 40 kgEnergy class A

Technical data

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

Dimensions diagram

Dimensions in mm.

1. Fresh air 2. Extract air 3. Exhaust air 4. Supply air 5. Heat exchanger 6. Supply air fan 7. Extract air fan 8. Filter fresh air 9. Filter exhaust air10. Electrical connection11. Condensation tray12. Condensation drain

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

Måttskiss Mått angivna i mm.

1. Friskluft

2. Frånluft

3. Avluft

4. Tilluft

5. Motströmsvärmeväxlare

6. Tilluftsfläkt

7. Frånluftsfläkt

8. Filter tilluft

9. Filter frånluft

10. Elanslutning

11. Kondenstråg

12. Kondensavlopp

Genvex ECO 375 TS och TLECO 375T ett aggregat med hög kapacitet och de optimala måtten. Aggregatet är utformat med samma mått som

en garderob och passar därför perfekt tillsammans med ex. tvättstugans inredning.

Med högeffektiva, energieffektiva EC-motorer uppnår ECO 375T temperaturverkningsgrad på upp till 96 %. Mot-strömningsvärmarna kan levereras i aluminum eller PET-plast. PET-plasten ger generellt en högre verkningsgrad,

medan aluminum är energisnålare. ECO 375T levereras med Optima 251, med Optima 260 som möjligt tillval.

Fäktkapacitet

Kapacitetlinjerna är baserade på medelvärdet av till och frånluft i aggregatet. Kurvorna visar det genomsnittliga tryck som är vid specifikt luftflöde.

Styrenhet: Optima DesignEn av de viktigaste faktorerna för att en ventilationsanläggning ska fungera

energi effektivt är en intelligent styrning. Den väggmonterade styrenheten Optima Design har en lång rad funktioner och en överskådlig skärm som säkerställer att inomhusklimatet alltid är behagligt och hälsosamt.

FilterMöjlighet att stänga av filterlarmet.

HastighetMöjlighet att ställa in fläkthastigheten till nivåerna 0 – 1 – 2 – 3 – 4.

EftervärmeMöjlighet att sätta på eller stänga av den kompletterande eftervärmen.

InformationMöjlighet att få en god överblick över anläggningens aktuella driftstillstånd.

Förlängd driftMöjlighet att ställa in timern för forcerad drift mellan 0 och 9 timmar.

HuvudmenyMöjlighet att komma in i huvudmenyn där undermenyn är tillgänglig.

TemperaturMöjlighet att ställa in rumstemperaturen.

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

CapacityThe capacity graphs are based on a mean value of the supply air and exhaust air volume in a unit. The graphs indicate the average external pressure available with a given air volume.

Temperature efficiency"Dry" temperature efficiency according to EN 308 and with identical air flow on the fresh air and exhaust air side. Potential formation of ice on the heat exchanger at low outside temperatures has not been accounted for.

Temperature efficiency according to EN308%

PET

ALU

78

80

82

84

86

88

90

92

94

100 150 200 250 300 350 400 450 500 550 6000

m3/h

SEL factors ECO 375 TL – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

MAXSEL1000SEL1620SEL1800SEL 2100

SEL factors ECO 375 TS – measured according to EN13141-7 (G4/F7:ALU)Pa

m3/h0

100

200

300

400

500

600

0 50 100 150 200 250 300 350 400 450 500

SEL1000MAXSEL800SEL1620SEL1800SEL2100

Note:SEL/3600 = SPI [W/m3]

Kapacitet

Kapacitetlinjerna är baserade på medelvärdet av till och frånluft i aggregatet. Kurvorna visar det genomsnittliga tryck som är vid specifikt luftflöde.

SEL-faktorer ECO 375 TL - mått enligt EN13141-7 (G4/F7:ALU)

SEL-faktorer ECO 375 TS - mått enligt EN13141-7 (G4/F7:ALU)

Temperaturverkningsgrad enligt EN308

Verkningsgrad

Verkningsgrad enligt EN 308 vid jämt luftflöde vid tilluft och frånluft.