fsr fire-resistant poke-thru floor boxescdn-docs.av-iq.com › brochure › fsr lit1458 fl-frk...
TRANSCRIPT
MADE IN USA
244 Bergen Boulevard · Woodland Park, NJ 07424800.332.FSR1 · 973.785.4347 · F: 973.785.3318W: fsrinc.com · E: [email protected] LIT1458© 2013 FSR, Inc. All Rights Reserved. Specifications subject to change.
SmartFit 4”
• Easy installation, simply drill a 4” hole and install• “Step down” installation clips allow the fitting to beremoved from the floor from above
• Stationary fire barrier expands during fire conditionsto provide an upper fire seal
• Adjustable fire barrier accommodates concrete thickness from 3” to 6”
• Features dual 1” EMT or 3/4” and 11⁄2” EMT conduit for increased cable capacity
• Accepts FSR SmartFit cover for both carpet and tile applications
• UL Listed for use in 1-4 hour rated floors
FSR Fire-Resistant Poke-Thru Floor Boxes
FSR’s Fire- Resistant“Poke-Thru” floor boxesprovide capacity, aestheticsand installation ease.
Designed for use in fire
rated floors, these sturdycore hole products are available in 4”, 6” and 8” diameters.
All models combineflexibility via recessedmounting bracketry to accommodate a wide assortment of power, dataand audio video connectionoptions. A complete line ofsub-plates for devicemounting and connectorsare available.
Covers are available in three architectural finishes:
• Brushed Aluminum• Brushed Brass • Black
The cover technology exceeds UL scrub watertesting requirements.
SmartFit 6”
• Easy installation, simply drill a 6” hole and install• Drop down cable access doors to reduce trip hazards• Furniture feed option (6” core hole) for up to thirtyCAT 6a data cables and ten 10 AWG power wires
• Pre-pour sleeve eliminates the need for core hole drilling• Sub-plates accept IPS Plates and third party devices• Features 3/4” and 2” EMT conduits tubes• UL Listed for use in 2 hour rated floors
SmartFit 8”
Same features as SmartFit 6” plus...
• Easy installation, simply drill a 8” hole and install
• Drop down cable access doors to reduce trip hazards• Pre-pour sleeve eliminates the need for core hole drilling• Sub-plates accept IPS Plates and third party devices• Multiple conduit tube options are available.(See spec sheet)
• UL Listed for use in 2 hour rated floors
The Fire-Resistant Kit is offered in two sizes:
the FL-500P-6-FRK and FL-605P-6-FRK. Both
models include a UL listed 3-hour Fire-Resistant
Floor Box system comprised of a FireStop box,
and four FL-FRK 1½” Intumescent-lined
Conduit Assemblies, hardware and installation
instructions. A temporary cover is included and
protects the floor boxes interior during
installation.
The systems are approved for installations using
either light or normal weight concrete. The floor
box height position can be adjusted accordingly
to bring the floor box to the proper level before
the pour. When the pour box cavity is filled, the
concrete thickness around the floor box meets or
exceeds the UL fire-resistant ratings of the floor.
The support structure of the decking must be
designed by a Structural Engineer to assure
conformance to local building codes. The
FL-FRK FireStop Box is affixed to the decking
by means of welding, or TEK screws.
Our Floor Boxes combine rugged construction
and an elegant design for use in carpet, tile or
wood covered floors over poured concrete
applications. They are perfect for ballrooms,
convention spaces and high traffic areas.
Detailed spec sheets on these systems can
be found in FSR’s document library.
There is ample compartment room to
accommodate power, audio, video,
telecommunications and data in these elegant
and practical boxes. The floor boxes include
all the necessary internal plates and brackets
to make “pre” and “post” pour compartment
changes quick and easy. Using this system,
both high and low voltage gang configurations
along with compartment isolation can be
implemented “on the fly”. This makes just about
any cabling/connector scenario possible using
FSR’s IPS or other connector sources.
FL-500P-6-FRK Fire-Resistant Transformable Floor Box Systems
• Leveling feet• Removable center divider for passing cables through compartments• Up to 8-gang capacity undivided. If divided any combination that totals 3 to 4 gangs per side is permissible• 11-gauge steel temporary construction cover included• Internal plates and brackets included
FL-605P-6-FRK Fire-ResistantTransformable Floor Box Systems
Same features as the FL-500P-6-FRK plus additional space and gang openings.• Up to 12-gang capacity undivided. If divided any combination that totals 4 to 5 gangs per side is permissible
Elegant Cover Choices for Carpet, Wood and Tile Floors
NEW!Larger Capacity
BLP - Brass Carpet Flange
BSQ - Brass Square Flange
BLK - BlackFlat Hinged
PLP - Clay PaintedCarpet Flange
SLP - AluminumCarpet Flange
SS - StainlessSteel
SLD - Solid CoverAvailable in Aluminum,Black, Clay, and Gray
SSQ - AluminumSquare Flange
PLP - Gray PaintedCarpet Flange
There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications and different finishes.The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover toremain in place after connections are made and cables are routed through it. The 0.25” raised edge style covers are UL scrub water approved.
Fire Resistant Floor Box Kit Includes:
(1)FL-605P-6 Floor Box
(1) FL-FRK-605P-6 FireStop Box Assembly Kitincludes (4) FL-FRK 1½” Conduit Assemblies,
Hardware, Leveling Feet,Temporary ConstructionCover and Manual
FSR FL-605P-6 shownUL Listed Floor Box
(4) FL-FRK 1½”Intumescent-LinedConduit Assemblies
Steel Decking(not provided)
6” depth shown
FL-FRK-605PFireStop Box Assembly
Other depths available consult an FSR sales associate
FL-500P-6-FRK and FL-605P-6-FRKbox interior view. (FL-500P-6-FRK shown)
GANG PLATE DIVIDERS Add and remove as needed toform a multitude of gang arrangement possibilities
CENTER DIVIDERSRemove to run cables across compartments (in ” deep back boxes)
COMPARTMENT DIVIDERSRemove or arrange as needed to isolatecompartments
WARNING: Must be usedon a compartment where line voltage wiring is present
Pour in Place Floor Box Solutions
FSR FL-500P-6 shownUL Listed Floor Box
(4) FL-FRK 1½”Intumescent-LinedConduit Assemblies
Steel Decking (not provided)
FL-FRK-500PFireStop Box Assembly
6” depth shown
Fire-Resistant Floor Box Kit Includes:
(1)FL-500P-6 Floor Box
(1) FL-FRK-500P FireStop Box Assembly Kitincludes (4) FL-FRK 1½” Conduit Assemblies,
Hardware, Leveling Feet, Temporary ConstructionCover and Manual