fs timber-coatings-brochure
TRANSCRIPT
FIRE SECURITY SYSTEMS
Wood Fire Protection1 KS & 2 KS
Exc
elle
nce
in T
echn
olog
y
Thin-film intumescent coatings for Timber (wood) surfaces
DESCRIPTION
Hensotherm 1 and 2 KS, are wood (timber) coatings applied to the surface to stop flame spread.
1 KS is a transparent intumescent fire protection coating. The natural surface of the wooden materials remains visible. 1 KS is an environmentally friendly building material according to LEED valuation.
2 KS Outdoor protects wooden building com-ponents outside.
2 KS Indoor is designed for interior use on wooden materials. In combination with top coat HENSOTOP both coatings are good for accents of creative colour.
1 and 2 KS are normally spray applied and are classified according to European Stan-dard, SBI-Test DIN EN13501-1
WHERE TO USE 1 & 2 KS
1 & 2 KS can be applied in residential, com-mercial and industrial construction where you would like to have a highly decorative finish while continuing to use your timber.
Why Use 1 & 2 KS?
Fire Protection with Aesthetic Appeal for wood.
1 & 2 KS has been designed to allow fire protection of wood without compromising aesthetic appeal or function-ality:- Complete primer, fireproofing and topcoat solution,- Applied as a thin layer that does not compromise intri-cate designs and shapes created by timber,- Easy over coating with a wide range of coloured (RAL) finishes.
REQUIRED DATA
Product Spread of Flame Approval 1 KS SBI-Test DIN EN13501-12 KS SBI-Test DIN EN13501-1Approvals SBI-Test DIN EN13501-1 - Spread of Flame
Transport / Storage - Transport and store free from frost- preferably at a minimum of +5oC to a maximum of +30oC.- shelf-life of unopened pails: 12 month from date of manufacture.- Opened pails must be re-sealed.
Packaging - 12.5 and 25 kg net weight- Plastic pails- Other sizes on request
Surface Preparation Please refer to the Technical Data Sheet
Application Please refer to the Technical Data Sheet
Drying Time Please refer to the Technical Data Sheet
Top Coats Please refer to the Technical Data Sheet
Safety and the Environment Please refer to the Technical Data Sheet
Provides intumescent fire protection to wood structures and materials while maintaining architectural aesthetics for commercial infra-structure assets including:
- Homes- Airports- Stadiums and Leisure Facilities- Office Buildings- Retail Complexes- Cinemas- Residential low and Highrise Apartments- Atriums
Provides intumescent fire protection to w
TYPICAL APPLICATIONS
Manufactured by Rudolf Hensel GmbH, Germany
FIRE SECURITY SYSTEMSNorway :
Skibåsen 20b -4636 Kristiansand NorwayTel:+ 47 95 47 80 00 Fax: +47 38 02 15 31
Canada:PO Box 21096, Coquitlam BC V3E 3P9 Canada
Tel:+1 604 941 1001 Fax: +1 604 648 [email protected]
www.Fire-Security.net
Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry out sufficient tests in order to ensure that Fire Security products are suitable for the intended purpose and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials.
UAE :PO Box 40068
Ajman - United Arab EmiratesTel: +971 6 7478842 Fax: +971 6 7478843