front end housings - premier-mfg.com · pdf file- never attempt weld repair of damaged or worn...
TRANSCRIPT
- Never attempt weld repair of damaged or worn drawbar eyes or front end housings
- Clean and inspect drawbar eyes and eye housings for damage or excessive wear before each and every use
- All welds should be performed by a certified welder skilled in structural welding practices
- Drawbar structure as well as welds attaching front end housing to drawbar must be of sufficient strength to withstand the load rating of the drawbar eye
- Do not bind-up (Jackknife) any application as stresses can cause damage to products or components, resulting in failure and detachment of the trailer while in use
IMPORTANT GUIDELINES that apply to all Premier Front End Housings
PREMIER MANUFACTURING COMPANY 1-800-255-5387 • www.premier-mfg.com62
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
640S/640SA Front End Housing
340S/340SA Front End Housing
646
348 BUSHING
349WASHER
348BUSHING
13°
3/8
4 1/4 3 1/2
7 3/4 9
6 3/8
4 1/2
3 3/4 2 1/2
3 5/8
2 17/32
6 13/32
1 11/16
8 21/32
2
7
3 11/32
436
437 BUSHING
349WASHER
437BUSHING
0 TO 15
8 1/4 9 3/4
4 1/4
1 5/8 3/8
4 1/4
9 15/16
4 1/16 6 1/16
2 1/2 3 13/16
5 5/8
9 3/8
2
3 15/32
13°
2 in� (51 mm)3 1/2 in� (89 mm)3 1/2 in� (89 mm)26�3 lbs� (11�9 kg)
Inside Diameter:Outside Diameter:
Length:Unit Weight:
435/435A Front End Housing
Front End Housings
Accepts 3 in� (76 mm) standard channel or square tubing�
Parts Included:- 346 Housing- 349 Washer- 348 or *348A Bushings
*340SA comes with 348A Poly Bushings
Accepts 2 1/2 in� (64 mm) round tubing�
Parts Included:- 646 Housing- 349 Washer- 348 or *348A Bushings
*640SA comes with 348A Poly Bushings
Accepts 2 in� x 4 in� (51 mm x 102 mm) rectangular tubing or standard channel�
Parts Included:- 436 Housing- 349 Washer- 437 or *437A Bushings
*435A comes with 437A Poly Bushings
348 (Rubber) or 348A (Poly)207S, 307S or 405SSwivel Drawbar Eyes Only
Bushing Replacement:Designed For Use With:
2 in� (51 mm)4 1/4 in� (108 mm)4 1/2 in� (114 mm)36�7 lbs� (16�6 kg)
Inside Diameter:Outside Diameter:
Length:Unit Weight:
437 (Rubber) or 437A (Poly)207S, 307S or 405SSwivel Drawbar Eyes Only
Bushing Replacement:Designed For Use With:
2 in� (51 mm)3 1/2 in� (89 mm)3 1/2 in� (89 mm)18�7 lbs� (8�5 kg)
Inside Diameter:Outside Diameter:
Length:Unit Weight:
348 (Rubber) or 348A (Poly)207S, 307S or 405SSwivel Drawbar Eyes Only
Bushing Replacement:Designed For Use With:
346
348 BUSHING
349WASHER
348BUSHING
2 1/2 3 3/4
3 19/32
4 1/4
3 1/2
4 9/16
1 11/16
3/8
6 1/2
3
3 3/32
10
7 3/4 9
5
6 1/8
4 TO 23
4 7/32
2
4 5/16
25°