freedom univ 2
DESCRIPTION
Freedom Universal 2.0 Display all photo- and videocamera's live and working, having MTI's Freedom Universal 2.0 installed means: (3 month trial from install date) more up-selling less returns better customer experience more insight into customer's behavior in store Check here for a short video presentation http://www.mti-interactive.com/Company/virtual-store-tourTRANSCRIPT
Freedom Universal 2.0
U2.0 Features: Base
2 new base options• Low-profile • 3” stem
Enhanced visual design• 30% physical size reduction to
highlight products not merchandising
U2.0 Features: Puck
Enhanced visual design• 360-degree viewable LED• 30% physical size reduction to
highlight products not merchandising
Improved puck performance• Puck can spin 360-degrees without any
retractor kink or bind• Puck will not get “stuck” in any
orientation
U2.0 features: Puck LED States
*LED will also be off if NO color dip switches are set
*
360-degree Rotating Swivel
Allows puck to rotate 360-degrees without retractor kink/bind
Embedded inside puck handle• Only internal swivel on market• Markets most robust swivel
- Tested for over 250k rotations
Extends lifespan of retractor
Alarm Modules
U2.0 Alarm Modules
35% smaller than U1.0 modules Incorporates built-in EDM
functionality; Onsite headers Supports optional battery back-up Contains series of dip switches
• Color switches activate light ring color options
• Group switches group banks of 4 positions for simplified Lift function
16-position
4-position
U2.0 Alarm Module: Overview
Light Ring Color Options
LED Color Selections (Universal 2.0 pucks only)360-degree light ring that will cause the puck to have a glow effect
Idle - puck is at rest in the baseActive - puck is picked up or in alarming stateAlarm
- Setting color options for both idle and active will result in a 2-color flash when in alarming state
- If only one color option is selected the system flashes between selected color and off
Using U2.0 with Lift
U2.0 will have 2 types of puck configurations• Puck with reedswitch and swivel
- New installations using both U2.0 pucks and U2.0 alarm modules
• Puck with magnet and swivel (Built to order)- Retrofitting current install base- Requires EDM for Lift
Puck with embedded reedswitch will function in new U2.0 lift configuration
Pucks with embedded magnet will function in current (U1.0) configuration• Multi-color LED ring function will be disabled
U2.0 Lift with Reedswitch Embedded in Puck
16-position Alarm Module Dims
Top View Side View
4-position Alarm Module Dims
Top View Side View
Available Accessories
Angled adapter (surfboard II)• Integrated primary sensor eliminating
requirement for secondary sensor
Flat cap (VHB attachment) Anti-rotation sliders Camcorder anti-rotation slider Clover-leaf adapter
Available Accessories
Standard mounting cap No product cap
• Keeps LED lit for unpopulated positions
Power riser cap Offset tripod mount anti-rotation Alarm module back cover plate Spacer for thin fixture tops
Standard Mount Configurations
Standard cap•Adjustable anti-rotation sliders•Main application is merchandising digital cameras
Empty position cap•Used when no product is available to merch•Keep LED lit and cleans-up look of display
Standard cap•Camcorder anti-rotation slider•Main application is merchandising camcorders
Accessory Caps
Angle Adapter•50-degree angle•Used with GPS, cell phones, MP3s, etc..•Integrates connection with primary sensor •Eliminates need for secondary sensor
Flat Adapter•VHB covered cap•Integrates connection with primary sensor•Eliminates need for secondary sensor
Power Riser Adapter•Requires secondary sensor•Used with products that have power connections on bottom of unit
Smart Fit Kits
Same/similar contents as U1.0 will be required to support all SKU categories• Cable, sensor, bracket, manual, etc…
Puck design efficiencies will allow for fewer brackets to be specified in kits• Fewer risers• Uses lower cost accessory pieces• Use of angle adapter for GPS will not require secondary sensor
Most of the existing U1.0 brackets are compatible with U2.0• Upon product release brackets will be designed with intent to function
with C, Univ 1.0 and Univ 2.0• Current SLR bracket not compatible with U2.0
- New SLR bracket in design to function with Freedom C, U1.0 & U2.0