7/27/2019 FP5121

1/5

FP5121

ELECTRONICS PVT. LT

RENU

FlexiPanels

12.1" TFT

Color Touch Scr

7/27/2019 FP5121

2/5

alient Features :-

12.1 Graphical Touchscreen TFT Color Display

Ladder editor with powerful instruction set

Support for Recipes and 32K color Bitmaps

Communication Ports:

Two serial ports to connect PLC at RS232 / 422 / 485 levels / Printer / Programming Port

One USB (Device) port as Programming Monitoring Port

One USB (Host) port to connect USB memory drive

One optional Ethernet port (10/100 Mbps. Modbus TCP/IP)

Dual Port communication supported

Data Logging, Transfer logged data on USB memory drive

Floating point support, Alarms and Trending (Real Time and Historical), RTC

Multilanguage (Unicode) support with true type Windows fonts for graphical models

IP66 design. CE, UL approved. RoHS compliant

Common Programming software for the entire FlexiPanels family.........FREE!!

7/27/2019 FP5121

3/5

Operations :-

e FlexiPanels support Operator interface as well as Programmable Logic Controller Counter-

tures. The user can implement logic, specific to application using standard Ladder Up counter UP Down Counter

ogramming. A PLC logic block can be executed at power up, during every scan, upon Program Control -eiving an interrupt on specific I/O pins or upon a timer interrupt. The FlexiPanels

Subroutine CALL Subroutine RET Forerator interface functions revolve around Screens and Tasks that can be assigned to

Next Master Control Set Master Control Reseteens and application.

Jump Control Set Jump Control Reset En Intr

Dis Intr DT Step sequence Inituch Keys Task Step sequence Input Step sequence outputuch Keys in FlexiPanels can be assigned Tasks for three instances: when the screen is

uched, while the screen is touched and when the screen is released. Multiple tasks can

Function -assigned to a touch key. In addition to above, tasks for data entry, alarm management

Moving Average Digital Filter PID1,4. can be defined. These definitions allow Complete flexibility in cursor control and key

Upper limit Lower limit Maximum Valueerations when changing data.

Average Value Function generator Minimum Value

arms Special -al time and historical Alarms can be defined in FlexiPanels . User-friendly Alarm object

Device Set Device Reset Register Setn be defined on the display. Alarms can be real time or historical.

Register Reset Set Carry Reset Carry

Encode Decode Bit Count Flip Flopcipes Direct I/O Set Calender Calender Operationcipes data is stored in the FlexiPanels memory. With one button stroke, a set of data

n be downloaded to the PLC. Once in the local memory, the recipes data can be edited

The execution of ladder logic is in microseconds. Ladder monitoring for debugging is alsong simple data entry objects.

supported in FlexiPanels configuration software.

maps / Wizards Multilanguage / Unicode Supportferent bitmaps can be embedded on the FlexiPanels screen. Transparent buttons can

All the languages are supported in the FlexiPanels (Color Touchscreen based models) . Theused for data entry and set points on bitmap images. Bitmaps can be imported into the

can now display messages, alarms in any regional language. All Windows fonts can also beplication and displayed on the FlexiPanels screens. In addition, several wizards arein an application.pported to create commonly used objects such as Analog meters, Lamps, Buttons and

r graphs. 32K colors are supported for bitmaps.

Communication Ports

FP5121 has two serial communication ports. Both the ports can be used for programming osy events logging and trend tracking FlexiPanels , printing screens (only text), connecting to third party serial devices (barcode5121 models support data logging feature. A part of FlexiPanels memory can be

readers, temp scanners etc.) or to connect to a PLC or drive.otted for data logging. Real time as well as Historical Trending is also supported. The

Dual port feature is supported for FP5121. User can configure these serial ports to connect er can also display multiple trends with different pen color on one screen.

different devices supporting different protocols, such as PLC / Drives / DCS / SCADA etc.

dder Support It has one USB (Device) port. The USB port can be used as a programming port or for laddexiPanels support ladder functionality. User can define logic in the unit using FlexiSoft

monitoring. The unit also has one USB (Host) port. The USB Host port can be used to conntware. The execution of ladder could be through communication port or through I/O. memory drive.ly HMI version of FlexiPanels also support ladder functionality. It is used for critical

plications where data is processed before sending it to controller. The FlexiLogics

Ethernet Portpport following different types of instructions :

FlexiPanels support optional Ethernet port (Modbus TCP/IP). It can be used to connect to a

and monitor machine / process status from remote location. The Ethernet port can also be uInstructions -

for remote programming of FP5121.O contact NC contact Output

ling Edge Rising Edge Inverter

Configuration Softwareverter Coil Positive Pulse Contact Negative Pulse Contact

FlexiSoft is a compact, Windows based software to configure the FlexiPanels units. Usersitive pulse coi l Negative Pulse Coi l

friendly configuration tools and easy approach, helps user create applications quickly and ea

ta Transfer -

OV word MOV DWORD Invert Transfer

ble Initialize Table Block Transfer Table Invert Transfer

ta Exchange Multiplexer Demultiplexer

ath-

dition Subtraction Multiplication

vision Addition with Carry Subtraction with Carry

crement Decrement

mpare -

eater than Greater than or equal Equal

t Equal Less Than Less than or Equal

gic -

D OR XOR

ift Rotate

To get started with FlexiPanels , user needs:ta Conversion -

1. FlexiPanels unit 2. FlexiSoft Softwarex to Ascii Ascii to Hex Absolute Value

3. USB Programming cable (Part no. PC-USBAB-00)segment decode Ascii conversion Binary Conversion

D conversion 2's complement word 2's complement Double word

OS requirements for FlexiSoft are:

mer - Windows Version : Microsoft Windows 2000 or above

N TOFF TSS

7/27/2019 FP5121

4/5

upported Task in FlexiPanels are :-

Driver FP5121

Allen Bradley DF1

Aromat FP Series

Danfoss Drive

ABB

Delta

Baldor

Fatek

GE Fanuc

GE SNP-X

Driver FP5121

Mitsubishi Q series (Serial)

LG Master K series

LG Master-K 300S

Modbus master

Mitsubishi FX

Idec

Omron Yaskawa Drive

Omron Host Link

Modbus slave

Driver FP5121

Toshiba T2 Link port

Serial Monitor

Siemens-S7-200

Siemens-S7-300

Toshiba Inverters

Universal Serial (ASCII)

Toshiba T1

UnitelwayTwido

Protocols Supported for :-

Write value to tag

Add constant to tag

Subtract constant from tag

Add tag B to Tag A

Subtract tag B from Tag A

Turn bit ON

Turn bit OFF

Toggle bit

Copy Tag B to Tag A

Swap Tag A and tag B

Copy HMI block to HMI/PLC block

Copy HMI/PLC block to HMI block

USB Data Log Upload

Print Data

Set RTC

Copy RTC to PLC block

Copy tag to STR

Go to screen

Go to next screen

Go to previous screen

GoTo Popup screen

Wait

Delay

Copy tag To LED

Task

Type

Power up Global Before

showing

While

showing

Screen

After

hiding

7/27/2019 FP5121

5/5

Dimensions :-

lease contact factor y for more information. We welcome an opportunity to develop new, custom drivers and customized units.

(Specifications subject to change without prior notice DS-FP5121

All dimensions are in mm.

An ISO 9001 : 2008 and ISO 14001 : 2004 certified company

FACTORY

Survey No. 2/6, Baner Road, Pune - 411045, India.

Tel : +91 20 2729 2840 Fax : +91 20 2729 2839

Email : info@renuelectronics.com

Website: www.renuelectronics.com

One D type port that supports RS232 and RS485 levels on different pins. Y type cable can be used for separate RS232 and RS485 levels simultaneously.

Model Comparison :-t Model PLC

Steps

Memory Screen

Memory

Logging

Memory

Serial**

Ports

USB RTCEthernet

Port

Power

Consumption

Weight Panel CBezel Dimensions (mm)

1

Display LCD LifeO

at 25 C

FP5121TDevice

and Host

Yes160 kUp-to

14 MB

293 W 312 W x 246 H x 48 D

(Drawing D)

1.680 Kg16WNo2YesUp-to

10 MB

800x600 SVGA

12.1" Color TFT

70000 hrs

Device

and Host

TS

Yes

Yes Yes160 kUp-to

14 MB

800x600 SVGA

12.1" Color TFTFP5121TN 293 W

312 W x 246 H x 48 D

(Drawing D)

Drawing D

1.680 Kg16WYes2YesUp-to

10 MB70000 hrs

312

200

225

246

293

238

Mounting Clamp

48

upported Printers :-

exiPanels support following Dot matrix serial printers :

EPSONSAMSUNGTVS

pecifications :-

wer : + 24V DC 15%, 16W Type of LCD : TFT Color Touch ScreenO

LCD Life : 70000 hrs at 25 Czel : IP66 rated Touch ScreenO O

perating Temperature : 0 to 50 C Supported Colors : 32K for Color TFT LCDO O

orage Temperature : -20 to 80 C Immunity to ESD : as per IEC61000-4-2

umidity : 10% to 85% (Non condensing) Immunity to Fast Transients : as per IEC61000-4-4

mmunication Ports : Two serial ports (RS232 / RS422 Immunity to Radiated

/ RS485 levels supported) Electromagnetic field : as per IEC61000-4-3

SB Device Port : As programming and monitoring port Immunity to

SB Host port : Supports USB Memory drive Conducted disturbances : as per IEC61000-4-6

hernet Port : For connecting to a PLC, Surge : as per IEC61000-4-5, Radiated emission : as per EN55011Programming of FlexiPanels a

third party device,Drive or remote

monitoring (10 / 100 MBPS).