forteza series granite kitchen sinkpdf.lowes.com/installationguides/846639028608_install.pdfwe would...
TRANSCRIPT
Forteza™ SeriesGranite Kitchen Sink
KGD-50 / KGD-52 / KGD-54 / KGU-55
INSTALLATION MANUAL
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. November 2, 2017
1
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
2
Prior to Installation:
• Make sure that you have all necessary parts by checking the parts list. If any part is
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Inspect the sink prior to installation to make sure that it has not been damaged
during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
Please note:
• KGUs can be installed undermount only (Option B)
• KGDs can be installed topmount & undermount (Options A & B)
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
3
Parts List
• Cut-Out Template
• Mounting Hardware
• Drain
NOTE: Specialized tools may be necessary to install Kraus granite sinks with
countertop materials other than wood, marble, or granite
Tools and Required Materials
Pencil
Screwdriver
Safety Goggles
Hole SawHammer
Drill
Masking Tape
Silicone Adhesive Jig Saw
Tape Measure
Adjustable wrench Phillips screwdriver
Tools You Will Need
Hex wrench Silicone Sealant
A
I
D
JF
B
G
C
H
E
4
Hardware (Included)
Important
• Instructions may vary depending on countertop material. Read all instructions
carefully, and ensure that counters are compatible with sink installation before
proceeding
• Follow the plumber’s code and builder’s code effective in your area
• Shut off water valves prior to installation
• Open sink packaging and verify that the sink is in perfect condition. Put sink back
into packaging to protect it until time of installation
• To replace an existing sink, make sure that the cut-out hole in the counter is of an
adequate size to fit the new sink
Kit for Drop-In Installation
Kit for Undermount Installation
5
Dimensions
KGD-5033” X 22” X 9 1/2” Min Cabinet Size: 36”Drain Model #: ST-2 x (2)
KGU-5531 3/4” x 19 1/8” ” x 9 1/2”Min Cabinet Size: 36”Drain Model #: ST-1G
KGD-5233” X 22” 9 3/4”Min Cabinet Size: 36”Drain Model #: ST-2 x (2)
KGD-5433” x 22” x 9 5/8”Min Cabinet Size: 36”Drain Model #: ST-1G
15 5/16'' 12 7/8''
18 1
/2''
16 1
/16'
'
33''
22''
18 3/16''
9 1/
2''
8 13
/16'
'
9 11
/16'
'9'
'
14 1/4'' 14 1/4''
17 1
/8''
33''
22''
6
Option A: DROP-IN INSTALLATION1. Trace Opening
• Locate the drop-in template in the box• Cut carefully along the dotted lines. Keep the inside portion of the
template. It contains important information concerning care and maintenance for your new sink
• Place the template on the counter, in the location where you will be installing the sink. When placing the template, note the location of cabinet doors and panels to ensure that they are compatible with sink installation. Make sure that there is enough space for water supply installation. Identify the location of the faucet and soap dispenser
• Fix the template to the counter using masking tape• Trace the inside of the template with a pencil. Remove the template
from the countertop OR
• Turn the sink upside down and place it on top of the counter. Note the location of cabinet doors and panels to ensure that they are compatible with sink installation. Make sure that there is enough space for water supply installation. Identify the location of the faucet and soap dispenser
• Trace the outer edge of the sink with a pencil, then remove the sink• Measure 7mm from the initial sink measurement and trace another line
on the inside of the drawing. This second line will be the cutting line
7
2. Cut Opening
• Using the drill, make a small starting hole of about ½” on the inside of the cutting line
• Drill a second time in the same hole with a larger bit to enlarge the hole so that the jigsaw can be inserted properly
• Put masking tape on the outer side of the cutting line. This will protect the counter from scratches and shattered fragments caused by the jigsaw
• Using the jigsaw, trim the inside of the cutting line• Insert the sink and adjust the opening if necessary
8
3. Add Additional Faucet Hole (Optional)
• Determine the location of the faucet• Place the sink upside down on a suitable flat surface• Using the 32mm (1 ¼”) diamond hole saw at high power (1500tr. per
min), break through in the desired location
CAUTION: This procedure will cause the metal saw to become very hot. Please handle with care
9
4. Install Sink
• Clean and dry the surface around the opening of the sink• Verify that the sink fits correctly in the opening. The edge of the sink
must sit on the counter• Turn the unit upside down to apply sealant. Apply silicone-based sealant
(not included) underneath the edge of the sink• Ensure that the plastic flap holding the screw underneath the sink is
partially opened, as shown• Insert the sink into the opening• Fix the sink to the counter by swiveling the mounting brackets, as
shown• Tighten the screws in the front of the sink, followed by the ones in the
back and on the sides of the sink• Remove excess silicone-based sealant
COUNTER
SINK
SILICONEBASED SEALANT
SINK
10
5. Install Drain
• Insert the metal strainer into the rubber seal, and then into the drain hole• Insert the rubber gasket and the main drain body underneath the sink• Using the screw, tighten the main drain body and the metal strainer
into place• Insert the basket on top of the drain installation
6. Install Pipes
• Install the faucet following the manufacturer’s instructions• Make proper water and waste pipe connections
Installation Manual
5. Drains installation
· Insert the metal strainer into the rubber seal, and then into thestraining hole.· Install the rubber gasket and the main drain body underneath thesink.· Using the screw, tighten the main drain body and the metal strainerinto place.· Install the basket on top of the drain installation.· Repeat the some procedure for the Installation of the seconddraining hole.
Note : Plumber putty is not required for the installation of these drains.
Rubber gasket
Main body
BASKET
SCREW
METAL STRAINER
RUBBER SEAL
RUBBER GASKET
MAIN BODY
11
Option B - UNDERMOUNT INSTALLATl ON1. Trace Opening
• Locate the undermount template in the box• Cut carefully along the dotted lines. Keep the inside portion of the
template. It contains important information concerning care and maintenance for your new sink
• Place the template on the counter, in the location where you will be installing the sink. When placing the template, note the location of cabinet doors and panels to ensure that they are compatible with sink installation. Make sure that there is enough space for water supply installation. Identify the location of the faucet and soap dispenser
• Fix the template to the counter using masking tape• Trace the inside of the template with a pencil. Remove the template
from the countertop
12
2. Cut Opening
• Using the drill, make a small starting hole of about 1/2” on the inside of the cutting line
• Drill a second time in the same hole with a larger bit to enlarge the hole so that the jigsaw can be inserted properly
• Put masking tape on the outer side of the cutting line. This will protect the counter from scratches and shattered fragments caused by the jigsaw
• Using the jigsaw, trim the inside of the cutting line
1/2”
13
3. Add Additional Faucet Hole (Optional)
• Determine the location of the faucet• Place the sink upside down on a suitable flat surface• Using the 32mm (1 ¼”) diamond hole saw at high power
(1500tr. per min), break through in the desired location
CAUTION: This procedure will cause the metal saw to become very hot. Please handle with care
14
4. Install Sink
• Turn the sink upside down. Align the sink with the cutting line on the counter • Using a pencil, mark 10 spots around the frame at a distance of about 1”
(25.4mm) from the edge of the sink• For a solid installation, it is recommended that all 10 mounting clips are used• Drill ¼” fixation holes at a depth of 3/8” in the indicated location• Insert the brass inserts by tapping them into the holes, split end first• Thoroughly clean the top portion of the sink edge. Clean underneath the
counter and around the cutting line using denatured alcohol• Apply a small quantity of silicone-based sealant (not included) around the
cutting line, 1/8” away from the edge of the counter.• Align the sink and fix the mounting clips as shown. Firmly tighten the screw
into the brass insert• Once the sink is correctly installed, tighten the wing nuts to fix it into place• Complete the installation of the counter• Remove any excess sealant on the inside of the bowls
Underneath the counter
15
4. Install Sink (Continued)
Underneaththe Counter
1/4 poDiameter
DepthStop
3/8”
BRASS INSERT
SUPPORT
METAL SCREW
SEALANT
16
5. Install Drain
• Insert the metal strainer into the rubber seal, and then into the drain hole
• Install the rubber gasket and the main drain body underneath the sink• Using the screw, tighten the main drain body and the metal strainer into
place• Install the basket on top of the drain installation
Installation Manual
5. Drains installation
· Insert the metal strainer into the rubber seal, and then into thestraining hole.· Install the rubber gasket and the main drain body underneath thesink.· Using the screw, tighten the main drain body and the metal strainerinto place.· Install the basket on top of the drain installation.· Repeat the some procedure for the Installation of the seconddraining hole.
Note : Plumber putty is not required for the installation of these drains.
Rubber gasket
Main body
BASKET
SCREW
METAL STRAINER
RUBBER SEAL
RUBBER GASKET
MAIN BODY
17
6. Install Pipes
• Install the faucet following the manufacturer’s instructions• Make proper water and waste pipe connections
Maintenance
Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the sink. Do not leave sharp objects on the surface of the sink for an extended period of time. Do not use abrasive cleaning products, sanding tools, steel wool, or bleaching products
ST-1G / ST-2
1 2
18
Codes/Standards Applicable:
Kitchen Sink WarrantyKraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
RestrictionsThis warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations. This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages. Due to the nature of drain usage, there is no finish warranty on any drain product (including pop-up drains, lavatory drains, and kitchen drains)
This warranty does not cover Marine or Outdoor Installation. Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial WarrantyKraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY 11050Toll-free [email protected]
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected]
In requesting warranty service, please be ready to provide:
Scan to Register Onlin e
R E G I S T E R Y O U R P R O D U C T T O D AY
Please take a moment to share your experience.
Visit www.kraususa.com and let us know what you think.
Contact Us To Learn More
1.800.775.0703 / www.kraususa.com / [email protected]
Like & Follow KrausUSA
We’re always looking for ways to improve.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY 11050Toll-free [email protected]
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected]
In requesting warranty service, please be ready to provide:
1. Proof of purchase2. A description of the problem
www.kraususa.com