formulation guide - ajiaminoscience.eu · many natural ingredients are used for the formulation....

32
2018 FORMULATION GUIDE

Upload: others

Post on 10-Aug-2020

29 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

2018FORMULATION

GUIDE

Page 2: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

・・・・・・・・・・・・・・・・

・・・・・・・・・・・・・・・・・・・・・・

・・・・・・・・・・

The infinity “A” The “A” incorporates the infinity symbol and represents the “A” of taste (“Aji”) and Amino acids. It signifies our infinite ambitions to pursue, master and popularize this taste (“Aji”), to drive the evolution of and develop the value of Amino acids using leading-edge bioscience and fine chemical technologies, and to promote global sustainability.

The line from the bottom of “j” extending upward to the right This line expresses the future growth and development of the AJINOMOTO® Group.technologies, and to promote global sustainability.

The line from “A” to “j” The “j” represents a person, suggesting people joining together and finding joy in cooking, eating and comfortable life styles enriched by taste (“Aji”) and Amino acids.

Page 3: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

CONTENTS

4AMINO ACID CONCEPT: PRODEW®

12COACERVATION

18INSTANT FOAMING CLEANSER

22NEW TRENDS

27FORMULATION FINDER

Page 4: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient
Page 5: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

AMINO ACID CONCEPT: PRODEW®

Page 6: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

AMINO ACID CONCEPT FOR

HAIR CARE

AJINOMOTO® Group being the specialist in amino acids technology, our Amino Acid cocktails “Prodew®” use this knowhow to enhance your hair care and skincare formulations.

Prodew® 500Prodew® 500 is an Amino acid blend modeled after the protein composition of the Cell Membrane Complex (CMC)

*Cys and Met are excluded. J. A. Swift et. al., Journal of Society of Cosmetic Chemist. 25. 355. (1974)

Asp

Ser

Gly

Val

His

Glu

Pro

Ala

IIe

Lys

Thr

Tyr

Leu

Phe

Arg

Constituent amino acids of protein in CMC* Amino Acids Mix of PRODEW® 500

MAIN PROPERTIES: Efficient moisturizer & Conditioner Synergetic uptake of PCA and Amino Acids by hair and scalp Provides Color retention of dyed hair Increases hair luster

Controls Hair damage❖ Increases Hair hydrophobicity❖ Increases Hair tensile strength

Preservative free

Hair Tresses treated with Prodew® 5000% 2% 5%

6

Page 7: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

ACAC-SH-150724-1

PEARL SILICONE-FREE HAIR SHAMPOO

Amisoft® ECS-22W maintains hair moisture and prevents damage of hair cuticle. Eldew® PS-203R and Prodew® 500 improve hair hydrophobicity and shine

and prevent dry scalp.

Part Ingredient (wt % ) Function Trade name / Supplier

A Amisoft® ECS -22W (30%) 25,00 Primary surfactant AJINOMOTO CO. INC.

COCAMIDOPROPYL BETAINE (30%) 10,00 Foam booster DEHYTON K / BASF

SODIUM LAUROAMPHOACETATE( 32%) 15,00Secondary surfactant

MIRANOL L-32 / SOLVAY

DECYL GLUCOSIDE (50%) 4,00 Foam booster PLANTACARE 2000UP / BASF

Eldew® PS-203R 0,20 Emollient AJINOMOTO CO. INC.

WATER balance

B ACRYLATES CROSSPOLYMER-4 6,50 ThickenerCARBOPOL AQUA SF-2 /

LUBRIZOL

WATER 15,00

C Prodew® 500 (50%) 2,00 Moisturizer AJINOMOTO CO. INC.

D GLYCOL DISTEARATE 1,50 Pearlizing agent

E PRESERVATIVE q.s.

F CITRIC ACID (30%) aq. to pH 5.8 3,57 pH-adjusterThe level of Citric acid is

presented as a rough guide

1. Mix part A with gentle stirring at room temperature.2. Add part B to mixture at room temperature.3. Add part C at room temperature. 4. Heat mixture of part ABC to 70-80°C.5. Add part D at 70-80°C.6. Cool down to room temperature.7. Add part E and F at room temperature and keep stirring until uniform.

PROCEDURE:

pH: 5.80Viscosity: 3,800-5,500 mPa.s (64, 30rpm, 30 sec., 25°C).Stability: 1, 25, 45, 50oC, Cycle(-5<=> 40°C) for 3 months.

TECHNICAL INFORMATION:

7

Page 8: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

ASC 27-116-1

AMINO CONDITIONER

This conditioner features amino-derived materials that provide smoothing and detangling, enhance the appearance and feel, and improve the overall

condition of the hair.

Part Ingredient (wt % ) Function Trade name / Supplier

A Water 87.40 DiluentDeionized Water / Kewpie Co,

dist. by AJINOMOTO® NA

Amisafe® AL-01 0.10 Amino acid conditioning agent / Smoothing, control AJINOMOTO CO. INC.

Prodew® 500 1.00Amino acid coctail /

Smoothing, color protection, shine, luster

AJINOMOTO CO. INC.

B Stearalkonium Chloride 1.50 Cationic Conditioner Ammonyx 4B / Stepan

Cetrimonium Chloride 1.00 Cationic ConditionerAmmonyx CETAC /

Stepan

CAE 0.50 Amino Acid based Cationic Conditioner AJINOMOTO CO. INC.

Eldew®PS-203R 0.50 Amino Acid Based Emollient/ Damage care AJINOMOTO CO. INC.

Emulsifying Wax NF 0.70 Emulsifier Polawax / Croda

C Phenoxyethanol, Ethylhexyl Glycerin 1.00 Preservative Euxyl PE-9010 / Schülke & Mayr

Charge batch vessel with water and begin heating to 75°C with stirring. Add Amisafe® AL-01 and Prodew® 500. Combine Phase B and add to Phase A at 75ºC. Allow to mix 20 minutes at 75°C then begin cooling while maintaining controlled mixing. When batch reaches 50 ºC, add preservative. Continue cooling and mixing to room temperature.

PROCEDURE:

pH: 4.2 - 4.7Viscosity: 11,000 mPa.s at 3 rpm, spindle #3, 25ºC, 30 sec (Brookfield).Stability: >3 weeks at 25, 40, 45°C.

TECHNICAL INFORMATION:

8

Page 9: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

9

Prodew® 600Prodew® 600 is an Amino acid blend modeled after the Natural Moisturizing Factor (NMF) in the Stratum Corneum.

Amino Acid compositionof NMF

H.W.Spier, G.Pascher, Der Hautarzt, Vol.7, 55-60 (1956)

NeutralAmino Acids,

44.7%

BasicAmino Acids, 13.7%

CyclicAmino Acids, 0.9%

HydroxylAmino Acids,

31.3%

AcidicAmino Acids, 9.4%

Amino Acid compositionof Prodew® 600

NeutralAmino Acids,

44.8%

BasicAmino Acids, 13.7%

CyclicAmino Acids, 0.9%

HydroxylAmino Acids,

31.3%

AcidicAmino Acids, 9.3%

COMPOSITION NMF (%)

Amino Acids 42.2

PCA 12.2

Lactic Acid 11.3

Urea 6.7

Others 27.6

MAIN PROPERTIES: The Amino Acid composition of Prodew® 600 is almost the same as the NMF

Prodew® 600 in a skin toner and skin cream strongly reduces fine wrinkles

Penetrates into the Stratum Corneum and improves the water content in the skin

Improves the skin barrier function Preservative free

Before application After application

AMINO ACID CONCEPT FOR

HAIR CARE

Page 10: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

NST-2

SKIN TONER

A skin toner for dry skin, formulated with Prodew® 600(Technical Data Sheet No.1002-0380E ~ 0470E)

Part Ingredient (wt % ) Function Trade name / Supplier

A Sodium Hyaluronate 0,03 MosturizerFCH-120 / KIKKOMAN

BIOCHEMIFA

B Water 76,80

C Prodew® 600 5,00 Mosturizer AJINOMOTO CO. INC.

Butylene Glycol 4,00 Mosturizer

PEG-8 8,00 Mosturizer

Alcohol 3,00

Preservative q.s.

D 5% NaOH 1,10

1. Add part A to part B while stirring2. After confirmation of dissolution, add part C to part A while stirring.3. Add part D to part A to adjust the pH.

PROCEDURE:

pH: 5.5Stability: 50°C, 45°C, 25°C, 0°C, -5°C, Cycle(-5°C~40°C) for one month.

TECHNICAL INFORMATION:

10

Page 11: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

11

CRP-3

MOISTURIZING CREAM

Prodew® 600 imparts a long lasting moisturizing effect(Technical Data Sheet No.1002-0380E, 0390E, 0400E, 0410E, 0440E, 0450E, 0460E, 0470E)

Part Ingredient (wt % ) Function Trade name / Supplier

A Squalane 3,00 Emolient

Microcrystalline Wax 2,00 EmolientRefined Microcrystalline Wax /

NIKKO RIKA

Isopropyl Myristate 5,00 EmolientIPM / KOKYU ALCOHOL

KOGYO

Dimethicone 0,50 Emolient KF-96A-10CS / SHIN-ETSU

Cetyl Alcohol 3,00 Emolient KALCOL 6098 / KAO

Behenyl Alcohol 1,00 Emolient KALCOL 6098 / KAO

Glyceryl Stearate 3,50 EmulsifierNIKKOL TS-10V / NIKKO

CHEMICALS

Polysorbate 60 2,00 EmulsifierNIKKOL TS-10V / NIKKO

CHEMICALS

B Amisoft® HS-11P 0,30 Co-emulsifier AJINOMOTO CO. INC.

Glycerin 8,00 Moisturizer

Butylene Glycol 4,00 Moisturizer

Prodew® 600 2,00 Moisturizer AJINOMOTO CO. INC.

5% NaOH 0,80

Preservative q.s.

Water balance

1. Dissolve part A at 80oC.2. Dissolve part B at 80oC.3. Add part B to part A while stirring and emulsify with homomixer at 3000rpm, 5min.4. Cool down to room temperature while stirring.

PROCEDURE:

pH: 5.5Viscosity: 25,000-45,000 mPa.s (B type, rotor No.4, 12rpm, 30sec., 25°C).Stability: 45°C, 25°C, 0°C, -5°C, Cycle(-5°C~40°C), for one month.

TECHNICAL INFORMATION:

Page 12: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient
Page 13: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

COACERVATION

Page 14: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

COACERVATION How to get conditioning effect and damage care prevention on Hair.

Our solution :Formulate an Amino-Shampoo combining Amisoft® CS-22 and cationic polymer.

Composition of a basic Hair Shampoo:

14

AMINO-SHAMPOO CONTAINS AMINO ACID SURFACTANTS Key words Non-silicone Sulfate-free Natural concept Gentle

- Silicone causes "built-up effect" on our hair.- Shampoo without Silicone has a problem of "squeaky feeling"

when it is rinsed. ➞ The solution is Amino Acid surfactant / "COACERVATION"

Scalp care Absorption Moisture

Action (wt % ) Example

Water 60~80

Foaming cleansing surfactant

15~20 Anionic surfactantAmphoteric surfactant

Foam booster 2~5 Fatty acid alkanolamidesBetaine

Thickening polymer 0.5~2 Xantham gum, cellulose

Conditioning agents

0.1~1Quaternaty ammonium compounds, Quaternized polymer

Preservative -

Others -Citric acid, NaOHEDTA

pH 4.8~6.8

Lipophilic part

Anionic surfactantHydrophobic part Counter Ion

- +

Amphoteric surfactant

-+

Ex.: Cocamidopropyl betaine

Ex.: Polyquaternium

Ex.: SLES, Amisoft®, Amilite

+++ +

+Cationic polymer

+++ +

+Cationic polymer

Lipophilic part

Anionic surfactantHydrophobic part Counter Ion

- +

INTERACTION

COACERVATION

+ ++

++

Page 15: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

Start of rinsing

End of rinsing

15

+ ++

++

1. Solubilization

2. Saturation

Dilution

Dilution

Dilution

3. Hydrophobicity

4. electrostatic / molecular attraction

➞➞

➞➞

➞➞

Sphericalmicelle

Cationicpolymer

CationicpolymerHemi micelle

++

+

++ +

+

++

++

+

++ +

+

++

++

+ ++

Monomer

1. Soluble

2. Soluble

4. Soluble

3. Insoluble = Coacervation

Making complex of hemimicelles of

surfactants and cationic polymers = Coacervate

AMISOFT® CAN ENABLE EASIER COACERVATION THAN OTHER ANIONIC SURFACTANTS.

Page 16: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

16

COACERVATE ON HAIR DURING WASHING PROCESS

MEASUREMENT OF KINETIC FRICTION DEMONSTRATES BENEFITS OF USING AMISOFT® IN A SHAMPOO FORMULATION:

SLES SHAMPOOAMINO SHAMPOO

SLES SHAMPOOAMINO SHAMPOO

SEM picture of hair

Natural hair tresses about 15cm long (1g weight) tested on a Friction tester (KES-SE Katotech)

Amisoft® Shows good smoothness during rinsing

Force-VoltageTransducer

The coacervate of Amisoft® can stay on hair better than SLES's, and can prevent hair damage.

Page 17: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

17

CSAN-220CP

TRANSPARENT HAIR SHAMPOO

Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel.

Part Ingredient (wt % ) Function Trade name / Supplier

A Amisoft® CS-22 (25%) 10,0 Foaming cleansing surfactant AJINOMOTO CO. INC.

Amisoft® MS-11 1,0 Foaming cleansing surfactant AJINOMOTO CO. INC.

DECYL GLUCOSIDE 8,0Foaming cleansing

surfactant

DISODIUM COCO-GLUCOSIDE CITRATE(30%) 5,0 Solubilizer Plantacare 2000up / BASF

GLYCERIN 5,0 Humectant

Ajidew® NL-50 (50%) 2,0 Conditioning agent AJINOMOTO CO. INC.

Amisafe® AL-01 0,2 Conditioning agent AJINOMOTO CO. INC.

WATER Balance Balance

PRESERVATIVE q.s. q.s.

B2% GUAR HYDROXYPROPYLTRIMONIUM

CHLORIDE26,6 Conditioning agent

JAGUAR EXCEL / Solvay Novecare

B 2% XANTHAN GUM 15,0 Thickening polymer Keltrol CG-SFT / CP Kelco

C CITRIC ACID 10% aq. 2,8 pH adjustmentThe level of citric acid is

presented as a rough guide

1. Heat part A to 80o C while stirring and dissolve.2. Add part B to A while stirring slowly and mix well at 80o C3. Add part C to A+B while stirring slowly and mix well at 80o C4. Add part D and mix well.

PROCEDURE:

pH: 5.90Viscosity: 4,000 mPa.s (B type, rotor No.3, 12rpm, 30sec., 25°C).Stability: -5°C, 25°C, 45°C, Cycle(-5, 40°C) for 3 months.

TECHNICAL INFORMATION:

Page 18: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient
Page 19: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

INSTANT FOAMING CLEANSER

Page 20: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

INSTANT FOAMING CLEANSER

SP-01-CS

FACIAL CLEANSER PUMP

In addition to efficiency and mildness, end users’ expectations for facial cleansers now include ease of use and rich foam. The below formulation combined with a suitable dispenser meets these expectations.

Amisoft® based self-foaming type facial cleanser. Ajidew® NL-50 leaves smooth skin-feel after washing.

Part Ingredient (wt % ) Function Trade name / Supplier

A Amisoft® CS-22 (25%) 33,0 Foaming surfactant AJINOMOTO CO. INC.

DECYL GLUCOSIDE 4,0 Foaming surfactant PLANTACARE 2000UP / BASF

BUTYLENE GLYCOL 5,0 Moisturizer

PEG-40 HYDROGENATED

CASTOR OIL PCA ISOSTEARATE 2,0 StabilizerPYROTER CPI-40 / Nihon emulsion

B Ajidew® NL-50 (50%) 1,0 Moisturizer AJINOMOTO CO. INC.

PRESERVATIVE q.s.

WATER balance balance

1. Dissolve all ingredients at 70-80oC while stirring.2. Cool down to 30oC.

PROCEDURE:

pH: 6.80Viscosity: 3 mPa.s (B type, rotor No.1, 30rpm, 30sec., 25°C).Stability: -5°C, 25°C, 45°C, Cycle (-5°C~40°C) for one month.

TECHNICAL INFORMATION:

20

Page 21: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

ACAC-DMS-18

FOAMING MAKE-UP REMOVER

Easy-to-use self foaming-type make-up remover. Amilite® GCK-12H is employed for its foamability and fresh skin afterfeel.

1. Mix part A until uniform at room temperature.2. Mix part B until uniform at room temperature.3. Add part B to part A slowly and continuously.4. Keep stirring until clear.5. Heat the mixture and add part C about 60-70°C.6. Keep stirring ang heating until uniform.7. Cool down to room temperature.

PROCEDURE:

pH: 7.54Stability: 1, 25, 45°C, Cycle(-5, 40°C) for 3 months.

TECHNICAL INFORMATION:

21

Part Ingredient (wt % ) Function Trade name / Supplier

A HYDROGENATED POLYISOBUTENE 1.1 Make up cleansing PERLEAM EX / NOF

PEG-20 GLYCERYL TRIISOSTEARATE 2.7 Emulsifying agentEMALEX GWIS320 / NIHON

EMULSION

B WATER balance

DIPROPYLENE GLYCOL 10.0 Solubilizer

GLYCERIN 10.0 Humectant

Amilite® GCK-12H (30%) 10.0 Cleansing agent AJINOMOTO CO. INC.

LAURAMIDOPROPLY HYDROXYSULTAINE(30%) 10.0 Cleansing agentSOFTAZOLINE LSB / KAWAKEN

FINE CHEMICAL

LAURYL GLUCOSIDE (50%) 2.0 Foam booster PLANTACARE 1200 UP / BASF

C DISODIUM EDTA 0.1 Chelating agent

Preservatives qs Preservative

Page 22: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient
Page 23: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

NEW TRENDS

Page 24: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

NEW TRENDS

FMABP-8-32G

FACIAL MASK SHEET

We have prepared three guide formulations following recent trends from the market: new habits in our day to day cleansing/ caring ritual (Face Mask), innovative product format (fragrance stick) and eco-friendly cleanser (Powder facial wash).

A moisturizing facial mask sheet using Ajidew® NL-50. The Emollient and Humectant ingredients are derived from amino acids, they provide super

moisture feeling without greasiness

Part Ingredient (wt % ) Function Trade name / Supplier

A WATER Balance

CARBOMER 0.50 Thickener Carbopol 980 Polymer / Lubrizol

B BUTYLENE GLYCOL 0.50 Humectant

PROPANEDIOL 0.50 Humectant

XANTHAN GUM 0.05 Thickener Keltrol CG-SFT / CP Kelco

C Eldew® PS-203R 0.50 Emollient-Quasi- intercellular lipid AJINOMOTO CO. INC.

PEG-40 HYDROGENATED CASTOR OIL 3.00 Solubilizer EMALEX HC-40 / NIHON Emulsion

BUTYLENE GLYCOL 2.00 Humectant

D WATER 36.00

E Ajidew® NL-50 2.00 Skin natural moisturizer AJINOMOTO CO. INC.

SODIUM HYALURONATE (1% Soln.) 0.50 Sensory improver Hyaluronic acid FCH-201P / Kikkoman biochemifa

F WATER 10.00

L-Arginine C-Grade 0.76 pH adjuster AJINOMOTO CO. INC.

DISODIUM EDTA 0.05 Stabilizer Dissolvine S-NA2-S / Akzo Nobel

G PRESERVATIVE q.s.

FRAGRANCE q.s.

1. Make a homogeneous dispersion of part A using disperse mixer.2. Mix the part B at room temperature.3. Add part B to part A while stirring at 85°C until be a homogeneous liquid.4. Mix the part C at 85°C.5. Add part C to part D slowly with stirring at 85°C to make solubilized liquid.6. Add part C to part A with gentle stirring at 85°C until white liquid obtained.7. Cool down to 45°C while stirring then add part E.8. Add the part F to main part while stirring to neutralize.9. Add part G to main part while stirring.10. Cool down to room temperature.

PROCEDURE:

Appearance: Translucent low viscous liquid pH: 6.0 (Direct measurment)Viscosity: 600-1,200 mPa.s (B-type, rotor No.3, 30 r.p.m., 30 sec., 25°C)Stability: -5, 5, 25, 40, 45, 50°C, Cycle(5-45°C)/1month

TECHNICAL INFORMATION:

24

Page 25: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

ASC 30-66

AMINO BLOSSOM FRAGRANCE

This transparent solid fragrance not only has an enticing cherry blossom scent but also a unique appearance. A hard clear gel is produced by using a pair of low molecular weight amino acid-derived gelling agents that combine to form a stable network in the chosen oils. The resulting clear solid gel traps the

fragrance and releases it upon contact with the skin. Eldew® SL-205 is a light amino emollient ester that contributes to glide on the skin while

Eldew® PS-203 acts as a stability enhancing agent and effective ceramide-like emollient.

Part Ingredient (wt % ) Function Trade name / Supplier

A GELATINIZATION AGENT GP-1 3.00 Pre-gel Mixture. Stick Strength and structure AJINOMOTO CO. INC.

GELATINIZATION AGENT EB-21 2.00 AJINOMOTO CO. INC.

Octyldodecanol 20.00 Risonol 20SP / Kokyu Alcohol

B Hydrogenated Polyisobutene 5.00 High Viscosity Oil Panalane H300E / Lipo Chemicals

Hydrogenated Polyisobutene 9.00 Low Viscosity Oil Panalane L14E / Lipo Chemicals

Eldew® SL-205 10.00 Light Ester, Moisturization AJINOMOTO CO. INC.

Diisostearyl Malate 9.00High MW ester, Stability,

MoisturizationSchercemol DISM Ester / Lipo Chemicals

C12-15 Alkyl Benzoate 11.00Light Emollient,

Clarity improvement, Moisturization

Liponate NEB / Lipo Chemicals

C Isostearyl Isosterate 10.00 Schercemol 1818 Ester / Lubrizol

Eldew® PS-203R 7.00 Stabilizing Agent, Emollient, Moisturizer AJINOMOTO CO. INC.

Fragrance 12.00 Fragrance Cherry Blossom Fragrance / Firminech

Clementine Essential Oil 2.00 Fragrance Clementine CO2 Essential Oil

Heat Phase A to 95°C, mix until dissolved, then add to the heated to 95°C Phase B, mix thoroughly while maintaining temperature. Upon cooling to 85°C, slowly add mixed Phase C. Maintain temperature at 85°C and pour into molds, then let cool to room temperature.

PROCEDURE:

Appearance: Clear gel stickSolidification point: ~75°C.

TECHNICAL INFORMATION:

25

Page 26: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

26

PWT-310

POWDER FACIAL WASH

Ingredient (wt % ) Function Trade name / Supplier

Amisoft® LS-11 15,0 Cleansing surfactant AJINOMOTO CO. INC.

Amisoft® MS-11 15,0 Cleansing surfactant AJINOMOTO CO. INC.

MANNITOL 10,0 Humectant MARINE CRYSTAL / MARINE CRYSTAL

TALC 20,0 Dispersing agent MICROACE P-3 / NIPPON TALC

ZEA MAYS (CORN) STRACH 23,5 Vehicle ST STARCH C(W) / NIPPON STARCH CHEMICALS

GLUCOSE 15,0 Vehicle

Amihope® LL 1,0 Sensory improvement AJINOMOTO CO. INC.

AGAR 0,5 Foam stabilizer

Mix all ingredients and mill.PROCEDURE:

pH: 5.5 (1% aq.)TECHNICAL INFORMATION:

Facial wash in powder format using mild surfactants Amisoft® LS-11 and MS-11. Product has to be emulsified in the hands and then applied on the face for mild

cleansing. Amihope® LL imparts soft sensory feeling.

Page 27: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

27

FORMULATION FINDER

Product category Product Formulation ref Application Page

Amilite® GCK-12H ACAC-DMS-18Foaming make-up

remover21

Amisoft® ECS-22W ACAC-SH-150724-1Pearl silicone free

hair Shampoo7

ANIONIC SURFACTANT

Amisoft® CS-22

CSAN-220CPTransparent hair

shampoo17

SP-01-CSFacial Cleanser

pump20

Amisoft® HS-11P CRP-3 Moisturizing cream 11

Amisoft® LS-11 PWT-310 Powder facial wash 26

Amisoft® MS-11CSAN-220CP

Transparent hair shampoo

17

PWT-310 Powder facial wash 26

AMPHOTERIC SURFACTANT Amisafe® AL-01

ASC 27-116-1 Amino conditioner 8

CSAN-220CPTransparent hair

shampoo17

CATIONIC SURFACTANT CAE ASC 27-116-1 Amino conditioner 8

Ajidew® NL-50

CSAN-220CPTransparent hair

shampoo17

SP-01-CSFacial Cleanser

pump20

FMABP-8-32G Facial Mask Sheet 24

HUMECTANT Prodew® 500ACAC-SH-150724-1

Pearl silicone free hair Shampoo

7

ASC 27-116-1 Amino conditioner 8

Prodew® 600NST-2 Skin Toner 10

CRP-3 Moisturizing cream 11

Page 28: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

28

Product category Product Formulation ref Application Page

ACAC-SH-150724-1Pearl silicone free

hair Shampoo7

EMOLLIENT Eldew® PS-203R ASC 27-116-1 Amino conditioner 8

FMABP-8-32G Facial Mask Sheet 24

ASC 30-66Amino Blossom

Fragrance25

Eldew® SL-205 ASC 30-66Amino Blossom

Fragrance25

FUNCTIONAL POWDER Amihope® LL PWT-310 Powder facial wash 26

GELATINIZATION AGENTS GP-1 ASC 30-66Amino Blossom

Fragrance25

EB-21 ASC 30-66Amino Blossom

Fragrance25

Note: The information is provided based upon our technical data and present knowledge. However, we make no warranties, expressed or implied, and assume no liabilities in connection with any use of the information with respect to specific property, safety and suitability for a specific application. It is also not guaranteed that use of the information does not fall within the scope of any intellectual property rights.

Page 29: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

S.A. Ajinomoto OmniChem N.V.

Axis Parc Rue Emile Francqui, 7

1435 Mont-Saint-Guibert, Belgium

TEL:+32 (0) 10 48 41-22

[email protected]

URL: http://www.ajiaminoscience.eu/personal-care

CONTACT

29

Page 30: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

30

NOTES

Page 31: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient

31

Page 32: FORMULATION GUIDE - ajiaminoscience.eu · Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel. Part Ingredient