ford f150 supercrew & f150 super cab – part no. 09201 … · 2020. 5. 4. · 09201 2...

2
09201 2 SIDED.doc Rev: 0 FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201 INSTALLATION INSTRUCTION Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. NOTE: The Gear Box will not work with the rear under-seat subwoofer and the jack and jack bracket must be removed before installation. PACKAGE CONTENTS Gear Box – Part No: 09201 (1) Safety Strap with Strap Lock (1) Dividers (2) Installation Instructions (1) INSTRUCTIONS 1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and remove the jack and jack bracket with a 10mm socket and socket wrench (Figure 1 and 2). Figure 1 Figure 2 3) Reinstall the jack bracket bolts (Figure 3). 4) Install the safety strap through one of the slots on the backside of the Gear Box (Figure 4).

Upload: others

Post on 16-Aug-2020

13 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201 … · 2020. 5. 4. · 09201 2 SIDED.doc Rev: 0 FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201 INSTALLATION INSTRUCTION

09201 2 SIDED.doc

Rev: 0

FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201

INSTALLATION INSTRUCTION Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. NOTE: The Gear Box will not work with the rear under-seat subwoofer and the jack and jack bracket must be removed before installation. PACKAGE CONTENTS Gear Box – Part No: 09201 (1) Safety Strap with Strap Lock (1) Dividers (2) Installation Instructions (1) INSTRUCTIONS

1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and remove the jack and jack bracket with a 10mm socket and socket wrench

(Figure 1 and 2).

Figure 1 Figure 2

3) Reinstall the jack bracket bolts (Figure 3). 4) Install the safety strap through one of the slots on the backside of the Gear Box (Figure 4).

Page 2: FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201 … · 2020. 5. 4. · 09201 2 SIDED.doc Rev: 0 FORD F150 SUPERCREW & F150 SUPER CAB – PART NO. 09201 INSTALLATION INSTRUCTION

09201 2 SIDED.doc

Rev: 0

Figure 3 Figure 4 5) Position Gear Box under rear seat (Figure 5). 6) Install the safety strap under the center seat bracket and into the unused slot on the backside of the Gear Box. Feed the

strap through the strap lock, pull strap tight and fasten. Pull on the strap to make sure it is properly fastened (Figure 6).

Figure 5 Figure 6

7) Install the 2 dividers and you are ready to organize. If you are storing long items it may be necessary to remove the dividers. Also, small loose items can potentially roll around and become somewhat annoying. Simply place these items in a rag, towel, etc… roll them up and place in the Gear Box. If you have questions about your installation or any other Husky product, please call us at: 1-800-344-8759 M-F 8:00 am to 5:00 pm Central Time.