ford 5 - arthurs tractors … · used in same utility and industrial tractors as cylinder...
TRANSCRIPT
Steering WheelsREPLACES
2N3600 Steering wheel, 17-1/2" dia.,
keyed hub. For tractors 9N, 2N
(1939-1947).
Steering wheel, 17-1/2" dia., 36
spline hub. For tractors 8N
(1948-1952), NAA, 600, 700, 800,
900, 2000, 4000 4-cylinder
models (1953-1964).
8N3600
Steering wheel OEM style,
17-1/2" diameter, 36-spline hub.
Metal spokes. For tractors 8N
(1948-1952); NAA, 600, 700, 800,
900, 2000, 4000 4-cylinder
models (1953-1964).
8N3600-OE
Steering wheel, 18" dia. For
tractors 2000, 3000, 4000, 5000,
7000 (1965-1975); 2600, 3600,
4100, 4600, 5600, 6600, 7600
(1975-1981); 2610, 3610, 4110,
4610 (1981-); 5610, 6610 manual
steering (1981-). Replaces
D2NN3600 B.
D6NN3600B
Nut, steering wheel retaining. For tractors 2000,
3000, 4000, 5000, 7000 (1965-1975); 2600,
3600, 4100, 4600, 5600, 6600, 7600
(1975-1981); 2610, 3610, 4110, 4610 (1981-).
Replaces C5NN3N602A.
D5NN3N602A
Steering Wheel Cap & NutsREPLACES
C7NN3655B Cap, steering wheel. For tractors
2000, 3000 (except 3550), 4000,
5000, 7000 (1965-1975); 2600,
3600, 3900, 4100, 4600, 5600,
6600, 7600, 231, 233, 333, 335,
531, 532, 535 (1975-1981); 2310,
2610, 2910, 3610, 3910, 4110,
230A, 234, 334, 335, 530A
(1981-2/1990); 5610, 5900, 7610
(1981-1991); 8000, 9000, 8700,
9700, TW10, TW20, TW30
(1973-1982); 3230, 3430, 3930,
4130, 4630 (3/1990-); 4830, 5030
(7/1990-); 5610S, 6610S, 7610S
(1994-).
Nut, steering wheel ACORN
style. 11/16 -20. For tractors: 8N,
NAA {1948-1954}.
351114S
Nut, steering wheel ACORN style. 11/16 -20.
CHROME PLATED. For tractors: 8N, NAA
{1948-1954}.
351114CC
Nut, steering wheel ACORN style. 5/8 -18 For
tractors: 9N, 2N {1939-1947}.
351103S
Nut, steering wheel ACORN style. 5/8-18,
CHROME PLATED. For tractors: 9N, 2N
{1939-1947}.
351103CC
Washer, steering wheel for 4
spoke wheel {1.8 outside
diameter} For tractors: 9N
{1939-1942}.
9N3673
Vinyl Coated Wheel SpinnersREPLACES
WSV120B Blue spinner.
Complete wheel spinner
assortment: includes 2 blue, 2
green, 3 red, 2 yellow and 3
black. Universal.
WSV125A
Steering Gear Assemblies &
Parts
REPLACES
E4NN3503CA Steering gear assembly. For
tractors with manual steering less
cab 2600 except 2600V, 3600
except 3600V, 3900, 4100, 231,
233, 333, 335, 531, (1975 to
9-1978); 2810, 2910, 4110,
(10-1984 to 2-1990).
Steering gear assembly. For
power steering in tractors less
profile cabs 2310, 2610, 3610,
3910, 4110, 4610SU, 230A, 234,
334, 530A, (1981 to 2-1990).
Replaces E0NN3N503GA.
E4NN3N503CB
F-5-188www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633
WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
351114S
351114CC
351103S
351103CC
9N3673
2N3600
8N3600
8N3600-OE
D6NN3600B
D5NN3N602A
WSV120B
WSV125A
C7NN3655B
E4NN3503CA
Call for Price
E4NN3N503CB
"$1,982.64"
$30.27
$43.60
$7.68
$32.21
$2.87
$4.68
$4.68$45.84
$15.92
$15.92
$5.33
$6.20
$67.04
Steering gear assembly. For
tractors with power steering 4100
(8/1970-1975); 4600 less cab
(1975-1981); 340, 540
(1978-3/1981). Replaces
E1NN3N503AB.
E1NN3N503AC
Arm, steering gear. For power
steering on tractors 4100
(8/1970-1975); 4600 (1975-1981).
C7NN3590A
Steering shaft and nut assembly.
For manual and power steering
on tractors 4400, 4500, (1965 to
1975); for power steering on
tractors 515, 535, (1975 to
9-1978).
D2NN3A710E
Center arm, for power steering
pivot shaft on tractors 5000,
7000, (9-1970 to 1975); 5600,
6600, 7600, (1975 to 1981); 5610,
6610, 7610, (1981 to 3-1985).
D6NN3N670A
Steering gear assembly. For tractors with power
steering 5100, 7100 (9/1970-1975); 5600, 6600,
7600 less cab (1975-1981). Replaces
E1NN3N503BA, E1NN3N503BB.
E1NN3N503BC
Steering shaft and nut assembly.
For power steering on tractors
5610, 6610, 7610 (1981-3/1985);
5900 (1985-10/1991).
E0NN3A710BB
Arm, steering spindle, RH. For
power steering on tractors 5100,
7100 (1965-1975); 5600, 6600,
7600 (1975-1981); 5610, 6610,
7610 (1981-3/1985); 5900
(1985-1991).
C5NN3130A
Arm, steering spindle, LH. For
power steering on tractors 5100,
7100 (1965-1975); 5600, 6600,
7600 (1975-1981); 5610, 6610,
7610 (1981-3/1985); 5900
(1985-1991).
C5NN3131A
Steering Gear Set and PartsREPLACES
Steering gear set. Set contains one each of
9N3525, 9N3526, and 9N3527. For tractors 9N,
2N (1939-1947).
SGS3
Bushing, half-round, 4 required.9N3517
Shaft and pinion assembly.9N3525
Steering sector, right hand.9N3526
Steering sector, left hand.9N3527
Packing, shaft, 4 required.9N3670
Cup, steering gear thrust. For tractors 9N, 2n,
700, 900.
B3552
Cone, steering gear thrust. For tractors 9N, 2N,
700, 900.
68-3571A
Cone, steering gear sector. For tractors 9N, 2N.9N3573
Steering Sectors & BushingsREPLACES
Steering sector, RH, for double steering sector.
For tractors 8N S/N 216989 & up (1948-1952);
NAA, 600, 800, 2000, 4000 (1953-1964).
251293
Steering sector, LH, for double steering sector.
For tractors 8N, S/N 216989 & up (1948-1952);
NAA, 600, 800, 2000, 4000 (1953-1964).
251294
Bushing, steering gear sector {1-1/2 long}. For
tractors: 8N, 8NAN to s/n 216988 {1948-1949}.
{4 used}
8N3576A
Bushing, steering gear sector {.84 long}. For
tractors: 8N, 8NAN. NAA, NAB s/n 216988 &
up. {2 used}
8N3576B
F-5-189www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
SGS3
9N3517
9N3525
9N3526
9N3527
0N3670
B3552
68-3571A
$4.86
9N3573
E1NN3N503AC
"$1,571.90"
C7NN3590A
Call for Price
D2NN3A710E
Call for Price
D6NN3N670A
E1NN3N503BC
Call for Price
E0NN3A710BB
Call for Price
C5NN3130A
Call for Price
C5NN3131A
Call for Price
251293
251294
8N3576A
8N3576B
$143.90
$11.64
$176.99
$176.99
$7.97
$7.97
$417.72
$82.05
$171.42
$171.42
$20.06
$6.92
$3.93
Bushing, steering gear pitman
shaft. For tractors: 8N, NAA
{1949-1954}.
8N3553
Seal, felt dust seal for top of
steering column. For tractors: 8N,
NAA {1948-1954}.
8N3570
Steering SealsREPLACES
Seal, steering gear sector shaft. For tractors 8N
S/N 2616989 & up (1948-1952); NAA, 600, 800,
2000, 4000 (1953-1964).
D5UZ3591B
Repair Kit For Steering ShaftREPLACES
Repair kit for steering shaft. Services shafts
where upper seal has worn a groove into shaft
causing oil to leak from upper housing. For
tractors w/2-wheel drive 2100, 2110, 2120,
2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140
(1965-1975); 2600, 3600, 3900, 4100, 4600SU,
335, 532 (with or w/o cab 1975-3/1976; w/o cab
4/1976-1981); 2310, 2610, 2910, 3610, 3910,
3910SU, 4110SU, 4610SU, 230A, 234, 334,
530A (w/o cab 1981-9/1984).
SRK632AA
Steering Column Bushings &
Parts
REPLACES
C5NN3517A Bushing assembly, upper, for
steering column on tractors:2000, 3000, 4000 series 1965 &
up with power steering.
Bushing assembly, upper, for
steering column on tractors:2600, 3600, 4100, 4600 (4-1976
to 1981); 5600, 6600, 7600,
manual steering. (4-1976 to
1981); 2610, 3610, 4110, 4610
(1981 to -); 5610, 6610, 7610,
power steering (1981 thru
3-1985).
D5NN3517A
Spring, steering column dust seal.
EXACT of ORIGINAL. For
tractors: 9N, 2N (1939 to 1947).
9N3699
Retainer, steering gear dust seal.
EXACT of ORIGINAL. For
tractors: 9N, 2N (1939 to 1947).
9N3661
Steering column cap without
1/4-28 grease fitting hole. EXACT
of ORIGINAL. For tractors: 9N,
2N (1939 to 1947).|
9N3669A
Steering column cap with 1/4"-28
grease fitting hole.
EXACT of ORIGINAL. For
tractors: 9n, 2n(1939 to 1947).
9N3669B
Steering wheel washer. For
tractors: 8N, NAA (1948 to 1954).
356515S
Grommet, steering column. For tractors: NAA,
Jubilee {1953-1954}.
NAA3578B
F-5-190www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
C5NN3517A
D5NN3517A
9N3699
9N3661
9N3669A
9N3669B
356515S
NAA3578B
8N3553
8N3570
D5UZ3591B
SRK632AA
$5.33
$2.12
$7.29$4.89
$4.28
$7.97
$7.97
$3.90
$13.29
$55.43
$8.99
$8.99
Grommet, steering column to
instrumental panel. For tractors:
8N {1948-1952}.
8N3578
Gasket, steering gear housing
rear. For tractors: 9N, 2N,
{1939-1947}.
9N3593B
Seal, felt dust seal for steering
gear box sector shaft. For
tractors: {1948-1954}. {2 per pkg.}
8N, NAA.
8N3586
Gasket, steering gear housing
front. For tractors: 9N, 2N,
{1939-1947}.
9N3594
SEAL, STEERING COLUMN
DUST SEAL. FOR TRACTORS:
9N, 2N (1939-1957).
9N3660
SPRING, STEERING COLUMN
BEARING. FOR TRACTORS: 8N,
NAA, 600, 601, 700, 701, 800,
801, 900 (1948-1957).
8N3520
Bushing for Steering Gear
Rocker Shaft
REPLACES
Bushing, inner or outer. For tractors w/manual
steering 5000, 7000 (1965-1974); 5600, 6600,
7600 (1975-1981); 5610, 6610 (1981-); power
steering 5000, 7000 (1965-7/1970). Replaces
C5NN3N652A.
C5NN3N654B
Steering Gear Thrust BearingREPLACES
Mono-bearing. For steering shaft on tractors
with manual steering, 1948-1964. For tractors
8N, NAA, 600, 800. Not for Roiw Crop, Majors,
or Dextas. Replaces 1-8N3552 cup & 18N3571
cone. 2 required per tractor.
8N3571-52
Steering gear bearing for manual steering.
EXACT of ORIGINAL. For tractors; 8n, NAA
(1948 TO 1954).
8N3571-OE
Steering gear bearing kit. (Consist of 2-8N3552,
2-8N3571). EXACT of ORIGINAL. For tractors;8N, NAA (1948 TO 1954).
8N3505
Power Steering CylindersREPLACES
Power steering cylinder with 1/2" dia. rod, 7/16"
dia. threaded outer end. For tractors 601, 801,
2000AP & LCG, 4000AP & LCG, (1957 to 1964);
2000, 3000 except 3400, 4000 except 4410,
(1965 to 1975); 2600, 3600, 4600 if equipped
with cylinders w/female threads (1975 to -);
industrials 230A, 231, 234, 334, 530A, 531,
(1965 to -). Replaces OEM parts E2NN3A540BA
(RH) & E2NN3A547AA (LH).
E2NN3A540BA
Power steering cylinder with 5/8" dia. rod, 7/16"
dia. threaded end. Used on heavy-duty versions
using E2NN3A540BA. Replaces OEM parts
D4NN3A540A (RH) & D4NN3A547A (LH).
D4NN3A540A
Power steering cylinder with 5/8" dia. rod, 1/2"
dia. threaded outer end. For industrial tractors
335, 532, 3400, 4410 (1965-1975). Replaces
OEM parts C5NN3A739G (RH) & C5NN3C578B
(LH).
C5NN3A739G
F-5-191www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633
WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
8N3571-52
8N3571-OE
8N3505
8N3578
9N3593B
8N3586
9N3594
9N3660
8N3520
C5NN3N654B
E2NN3A540BA
D4NN3A540A
C5NN3A739G
$6.63
$4.01
$4.01
$11.32
$4.01
$4.01
$4.01
$5.24$256.52
$13.11
$42.21
$240.26
$256.52
Power Steering Cylinders 2REPLACES
Power steering cylinder, RH. For dual cylinder
applications on utility and industrial tractors 340,
340A, 340B, 540, 540A, 540B (4/1981-11/1988);
445, 445A, 450, 545, 545A (10/1978-11/1988),
345C, 445C, 545D (9/1992-).
D8NN3A540AB-HD
Power steering cylinder, LH, for dual-cylinder
applications. Used in same utility and industrial
tractors as cylinder D8NN3A540SB-HD.
D8NN3D547AB-HD
Power Steering Cylinder EndsREPLACES
C5NN3A302B Cylinder end with 7/16" internal
threads. For OEM & Tisco power
steering cylinders
E2NN3A5AOBA with 1/2" dia. rod
and D4NN3A54OA with 5/8" dia.
rod. For tractors 601, 801,
2000AP & LCG, 4000 AP & LCG
(1957-1964); 2000, 3000 except
3400, 4000 except 4410
(1965-1975); 2600, 3600, 4600
(1975-); industrials 230A, 231,
234, 334, 530A, 531 (1965-).
Cylinder end. For TISCO universal
power steering cylinders
C5NN3A739G, D4NN3A540A,
E2NN3A540BA. 5/8" threaded
end screws into cylinder head
and is rotated so cylinder can be
used for LH or RH applications.
Not for original OEM cylinders.
Fits C5NN3A302B installed on
tractors 601, 801, 2000AP &
LCG, 4000AP & LCG (1957-1964);
2000, 3000 except 3400, 4000
except 4410 (1965-1975); 2600,
3600, 4600 (1975-); industrials
230A, 231, 234, 334, 530A, 531,
532, 3400, 4410 (1965-1975).
E2NN3A540BJ
Cylinder end with 11/16" internal
threads. End screws onto rod. For
TISCO universal power steering
cylinders D8NN3A540AB-HD and
D8NN3D547AB-HD.
D8NN3A540BJF
Cylinder end, for power steering
cylinder, left end. For tractors
5700, 6700, 7700 (8/1976-1981);
6710 (1981-10/1985); 7710
(1981-1987).
D8NN3B539AB
Cylinder end with 11/16" internal
threads. End screws onto rod. For
TISCO universal power steering
cylinders D8NN3A540AB-HD and
D8NN3D547AB-HD. Replaces
TISCO cylinder end
D8NN3A540BJF.
D8NN3A540ABF
Cylinder end with 5/8" external
threads. End screws into cylinder
head. For TISCO universal power
steering cylinders
D8NN3A54OAB-HD and
D8NN3D547AB-HD. Replaces
TISCO cylinder end
D8NN3A54OBJM,
D8NN3D547BJM.
D8NN3D547ABM
Seal Kits and Repair Parts for
Power Steering Cylinders
REPLACES
Seal kit, for cylinder E2NN3A540BA. Piston rod
is retained with 1-5/8" snap ring.
E2NN3A-SK
Seal kit, for cylinder E2NN3A540BA. Piston rod
is retained with 1" snap ring and 1-3/4" threaded
spanner nut.
E2NN3X-SK
Replacement cylinder rod for E2NN3A540BA.ALX3008
Seal kit, for cylinders C5NN3A739G and
D4NN3A540A piston rod is retained with 1-5/8"
snap ring.
C5NN3A-SK
Seal kit, for cylinders C5NN3A739G and
D4NN3A540A piston rod is retained with 1" snap
ring and 1-3/4" threaded spanner nut.
C5NN3X-SK
Replacement cylinder rod for C5NN3A739G.ALX4008
Retro-Fit seal and piston kit. Contains piston &
head, seals, snap ring. Heavy-duty parts to
overhaul Tisco D8NN3A540AB &
D8NN3A547AB. Not for OEM cylinders.
D8NN3A540SKRF
Seal kit. Contains 4 seals, o-ring, and snap ring.
For servicing Tisco power steering cylinder
D8NN3D547AB-HD, D8NN3A540AB-HD. Not
for OEM cylinders.
D8NN3A540SKP-HD
F-5-192www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
D8NN3B539AB
D8NN3A540ABF
D8NN3D547ABM
D8NN3A540AB-HD
D8NN3D547AB-HD
C5NN3A302B
E2NN3A540BJ
D8NN3A540BJF
E2NN3A-SK
E2NN3X-SK
ALX3008
C5NN3A-SK
C5NN3X-SK
ALX4008
D8NN3A540SKRF
D8NN3A540SKP-HD
$397.16
$379.70
$51.00
$30.98
$33.48
$106.31
$38.45
$22.61
$27.00
$18.00
$21.83$40.58
$38.81
$38.81
$25.97
$438.51
Power Steering Pumps with
Reservoirs
REPLACES
E6NN3K514EA Power steering pump and
reservoir assembly, 2.74 gallons
at 1000 rpm. For tractors 3500,
3550 (5/1970-); 5100, 7100
(7/1970-); 4100 (4/1970-); 4600,
5600, 6600, 7600, industrial 420
(1975-1981).
Power steering pump and
reservoir assembly, 2.74 gallons
at 1000 rpm. For tractors 4500
(11-1970 to 3-1975). Replaces
D8NN3K514KB.
D8NN3K514KC
Power steering pump and
reservoir assembly. For tractors
TW5, TW15, TW25
(1983-2/1990). Replaces
E0NN3K514AB.
E0NN3K514AB
Power steering pump and
reservoir assembly. For tractors
5610, 6610, 7610
(4/1985-10/1991); 5900
(5/1985-10/1991); 5610S, 6610S,
7610S, 7810S (1/1994-). Replaces
E4NN3K514AB. E6NN3K514AA.
Not for power assist steering.
E6NN3K514AB
Filler Cap for Power Steering
Reservoir
REPLACES
Filler cap, non-vented, for power steering
reservoir body. For horizontal mounted pumps
on tractors 2000, 3000, 4000, 5000, 7000
(10/1968-1975); 2600, 3600, 4100, 4600, 5600,
5700, 6600, 6700, 7600, 7700, 231, 335, 420,
515, 531, 532 (1975-1981); 2310, 2610, 2810,
2910, 3610, 3910, 4110, 230A, 234, 334, 335,
530A (1981-2/1990); 5610, 5900, 6610, 6710,
7610, 7710 (1981-1991); 7810, 7910, 8210,
8530, 8830, TW5, TW15, TW25, TW35
(1982-10/1991); 8000, 9000, 8700, 9700, TW10,
TW20 (3/1973-1982); 3230, 3430, 3930, 4130,
4630 (3/1990-); 4830, 5030 (7/1990-); 5610S,
6610S, 7010S (1994-).
D2NN3A006B
Power Steering Seal KitREPLACES
Seal kit. For servicing power steering pumps:
E6NN3K514EA, D8NN3K514KC, E0NN3K514AB,
and E6NN3K514AB.
DHPN3A674B
F-5-193www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
D2NN3A006B
E6NN3K514EA
D8NN3K514KC
Call for Price
E0NN3K514AB
E6NN3K514AB
DHPN3A674B
$388.50
$763.14
$554.70
$3.24
$12.69
Power Steering FilterREPLACES
Power steering filter for pump reservoir. For
tractors 2000, 3000, 4000, 5000, 7000
(10/1968-1975); 2600, 3600, 4100, 4600, 5600,
5700, 6600, 6700, 7600, 7700, 231, 233, 333,
335, 420, 515, 531, 532 (1975-1981); 2310,
2610, 2810, 2910, 3610, 3910, 4110, 4610,
230A, 234, 334, 335, 530A (1981-2/1990); 5610,
5900, 6610, 6710, 7610, 7710 (1981-10/1991);
8000, 8700, 9000, 9700, TW10, TW20, TW30
(3/1973-1982); 7810, 7910, 8210, TW5, TW15,
TW25, TW35 (1982-2/1990); 8530, 8630, 8730,
8830 (3/1990-); 3230, 3430, 3930, 4130, 4630,
4830, 5030 (3/1990-10/1992); 5610S, 6610S,
7610S, 7810S (1/1994-). Replaces
E0NN3K758AA.
EDPN3K758A
Seals for Steering Gear
Rocker Shaft
REPLACES
Oil seal, inner for rocker shaft. For tractors
Major, Super Major (1952-1964); manual steering
4000 (1965-1975); 4600 (4/1976-1981); power
steering 4000 (1965-7/1970); manual steering
w/cab 2600, 3600, 4100 (4/1976-1981); 2610,
3610, 4110 (1981-); manual steering with or w/o
cab 4610 (1981-).
DDN3539
Oil seal, inner for rocker shaft. For tractors
w/manual steering 5000, 7000 (1965-1975);
5600, 6600, 7600 (1975-1981); 5610, 6610
(1981-); power steering 5000, 7000
(1965-7/1970).
C5NN3C615B
Oil seal, outer. For rocker shaft. 2 required. For
tractors, see DDN3539 & C5NN3C615B.
C5NN3528A
Power Steering BushingsREPLACES
Bushing, 1" long, for power steering center arm
pivot shaft. Tractors 5000, 7000, 2 used from
1965-1/1966; upper bushing for center arm pivot
shaft, 1 used on tractors 5000, 7000
(2/1966-1975); 5600, 6600, 7600 (1975-1981);
5610, 6610, 7610 (1981-3/1985).
C5NN3179A
Bushing, 1.38" long, for power steering center
arm pivot shaft, lower bushing. One used on
tractors 5000, 7000 (1965-1/1966); 5600, 6600,
7600 (1975-1981); 5610, 6610, 7610
(1981-3/1985).
C5NN3179B
Improved Power Steering
Hoses
REPLACES
FPH30 Single wire, braid hose assembly
with fittings, overall length 31".
For tractors 600, 700, 800, 900,
2000, 4000 (1957-1964); 2000,
3000 (1965-1975); 2600, 3600
(1975-1981); 2610, 3610, 3910
(1981-2/1991). Replaces
C0NN3A714B, C0NN3A717B,
C0NN3C769A, C0NN3C770A.
Single wire braid hose with
fittings; 35" long. For tractors
NAA, 600, 800 series (1957-).
Replaces power steering pump
pressure tube B8NN3A562A.
FPH34
F-5-194www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
C5NN3179A
C5NN3179B
EDPN3K758A
FPH30
FPH34
DDN3539
C5NN3C615B
C5NN3528A
$29.61
$31.20
$9.02
$6.35
$6.69
$1.38
$4.58
$6.47
Flexible power steering hose
designed to replace regrid Ford
tube assemblies. 54" Ing. 3/8" I.D.
SAE 100 R1A single wire braid
hose with 5/8"-18 thread 45
degrees SAE flare female swivel
on one end, 5/8"-18 thread SAE
straight inverted flare on other.
For tractors 2000, 3000, 4000,
(1965 & up); 5000, 7000, (9-1980
& up); 2600, 3600, 4600, 5600,
6600, 7600, (1975 & up). Can
replace tube assemblies
C5NN3A562C, C7NN3A562C,
C5NN3A541A, C7NN3A541A,
C7NN3A541B, D0NN3A562A.
FPH54
Front Axle Support PinsREPLACES
2N3126D Pin, front axle. OD 1.743", ID
1.310", L 4". For 9N, 2N (after S/N
164489), 8N.
Pin, front axle unthreaded. OD
1.743", ID 1.310", L 4". For NAA
(1953-1954).
NAA3126B
Pin, front axle, threaded. OD 1.750", L 4.50". For
all purpose and LCG (1953-1964).
NCA3127A
Flange, axle pin locking. All using
NCA3127A pin.
NCA3128A
Pin, front axle, heavy duty. All
purpose (7/1958-1964). 4.750"
total length, 4.00" usable length.
312659
Front axle pin, manual or power
steering. O.D. 1.750" I.D. 1.125",
L 4.960". For tractors 2000
(except 2300); 3000 (except
3300), 3400, 3500, 3550
(1965-7/1970).
C5NN3127B
Front axle pin, manual or power
steering. For tractors 2000, 3000
(8/1970-1975); 2600 (except
2600V), 3600 (except 3600V),
4100 (1975-1981); 2610 (except
2610V), 3610 (except 3610V),
4110 (except 4110V) (1981-). OD
2", ID 1.125", L 5.875". Uses
1-5/8" nut.
C7NN3127D
Front axle pin, front, manual or
power steering. For tractors
5000, 7000 (1965-1975); 5600,
6600, 7600 (1975-1981); 5610,
8610, 7610 (1981-3/1985). OD
1.875", L 8-7/8", head dia. 3-1/4"
and 1/2" hole.
C5NN3N159A
Front axle pin, rear, manual or
power steering. For tractors
5000, 7000 (1965-1975); 5600,
6600, 7600 (1975-1981); 5610,
6610, 7610 (1981-).
C5NN3N160A
Pivot shaft for center power
steering arm, 4.28" long. For
tractors 5000, 7000
(6/1966-1975); 5600, 6600, 7600
(1975-1981); 5610, 6610, 7610
(1981-3/1985).
C5NN3N703C
Front Axle Support Pin
Bushings
REPLACES
Bushing. Fits 4-cyl models with std. front axle
& manual or power steering (1939-1964). Not
for heavy front axles or industrial, grove, Majors,
or Dextas.
2N3039
Bushing for front axle pin, manual or power
steering. For tractors 2000 (except 2300), 3000
(except 3300), 3400, 3500, 3550 (1965-7/1970).
C5NN3153C
F-5-195www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
C7NN3127D
C5NN3N159A
C5NN3N160A
C5NN3N703C
FPH54
2N3039
C5NN3153C
2N3126D
NAA3126B
NCA3127A
NCA3128A
312659
C5NN3127B
$23.31
$7.99
$31.07
$20.87
$6.95
$7.10
$32.76
$47.87
$37.56
$31.85
$26.27
$51.00
$50.75
Bushing for front axle pin, manual or power
steering. For tractors 2000, 3000 (8/1970-1975);
2600 (except 2600V), 3600 (except 3600V), 4100
(1975-1981); 2610 (except 2610V), 3610 (except
3610V), 4110 (except 4110V) (1981-).
C7NN3153B
Bushing for front axle pin, front, manual or
power steering. For tractors 5000, 7000
(1965-1975); 5600, 6600, 7600 (1975-1981);
5610, 6610, 6710, 7610, 7710 (1981-).
C5NN3153A
Bushing for front axle pin, rear, manual or power
steering. For tractors 5000, 7000 (1965-1975);
5600, 6600, 7600 (1975-1981); 5610, 6610, 7610
(1981-).
C5NN3446A
Front axle support pin spacer. For tractors: 8N,
NAA {1948-1954}.
8N3024
Front Axle SupportsREPLACES
Front axle support. For tractor series 2000
(except 2300, 2310), 3000 (except 3300, 3310,
3400, 3500, 3550), 4140 (1965-7/1970).
C5NN3010D
Front axle center support. For tractor series 2000
(except 2300, 2310), 2100, 2110, 3000 (except
3300, 3310), 3100, 4100, 4110, 4140
(1965-1975); 2600 (except 2600N, V), 3600
(except 3600N, V), 3900, 4600SU, 231, 333, 335,
531 (1975-1981); 2610 (except 2610N), 2910,
3910, 230A, 234, 334, 335, 530A (1981-2/1990).
C7NN3010F
Front Axle Bolts & RodREPLACES
350789-KIT Bolt kit, front axle bolt, nut &
washer. Holds right and left axles
to center axle. For tractors: 9N,
2N, 8N {1939-1952}.
Radius rod to front axle pin. For
tractors: 8N, 8NAN {1948-1952}.
357623S8
Radius Rod Foot BoltREPLACES
Bolt, radius rod to front axle. L 5-1/2", 5/8" -18
thread, head OD 7/8". For all Ag models.
NAA3415B
Drag LinksREPLACES
Drag link for power steering, 50.50" center post
to center post. For tractors: 5000,
7000, (9-1970 to 1975); 5600, 6600,
7600, (1975 to 1981). Replaces
C7NN3304B.
E0NN3304CA
Drag Link EndsREPLACES
9N3270 End assembly, front, .687"-18 RH
thread,
3.187" to center of post. For
tractors 9N,
2N.
End assembly, front, .687" - 18 LH thread, 3.875"
to center of post. For tractors
w/manual steering NAA, 600, 800.
NAA3270A
End assembly, front, .687"-18 LH thread,
4.00" to center of post. For tractors 8N.
8N3270
End assembly, rear, .687"-18 RH
thread,
4.250" to center of post. For
tractors
w/manual steering 9N, 2N, 8N,
NAA, 600,
800.
NAA33271A
End front, for drag link
w/manual steering.
For tractors: Dexta,
Super Dexta (1957 to
1964), 2000, 3000,
(1965 to 1975); w/o
cab 2600, 3600, 4100, (1975 to 1981);
2610, 3610, (1981 to 9-1984)..687"-18
LH thread, 4.00" to center of post.
957E3290B
End, rear, for drag link w/manual
steering.
For tractors Dexta, Super Dexta
(1957 to
1964); 2000, 3000, (1965 to
1975); w/o
cab 2600, 3600, 4100, (1975 to
1981);
2610, 3610, (1981 to 9-1984). RH
thread.
957E3307B
F-5-196www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
E0NN3304CA
C7NN3153B
C5NN3153A
C5NN3446A
8N3024
9N3270
NAA3270A
8N3270
NAA33271A
957E3290B
957E3307B
C5NN3010D
C7NN3010F
350789-KIT
357623S8
NAA3415B
$3.91
$13.29
$6.93
$15.54
$13.46
$18.90
$4.71
$3.65
$170.34
$138.69
$5.33
$4.44
$16.25
$12.99
$13.05
$98.55
End, front, for drag link w/power steering.
For tractors 2000, 3000, (1965 to 1975);
w/o cab 2600, 3600, 4100, (1975 to
1981); 2610, 3610, (1981 to 9-1984).
.750"-16 LH thread, 3.310" to center of
post.
C5NN3A300B
End, rear, RH, 29.625" to center
of post, for drag link with power
steering. For tractors
2000, 3000, (1965 to 1975); 2600,
3600,
4100, less cab, (1975 to 1981);
2610,
3610, 4110, less cab, (1981 thru
9-1984).
C5NN3307G
End, rear, LH, 28.125" tube
length, for
drag link with power steering. For
tractors
2000, 3000, (1965 to 1975); 2600,
3600, 4100, less cab, (1975 to
1981); 2610,
3610, 4110, less cab, (1981 thru
9-1984).
C5NN3308E
End, front, 9.00" to center of post
for drag link with manual or
power steering. For
tractors 4000 (1965 to 1975),
4600 (1975
to 1981). Replaces C5NN3A300A.
D0NN3A300A
End, front, 8.75" to center of
post, for drag link w/manual or
power steering. For tractors
4610 (1981 to -).
E1NN3A300AA
End, rear, 41.25" to center of
post, for drag link with power
steering. For tractors 4000
(1-1972 to 1974), 4600 (1975 to
1981).
D0NN3307A
End, front, 1.00"-16, LH threads,
3.75" to center of post, for original
style drag link with threaded ends
& manual steering. For
tractors 5000, 7000, (1965 to
12-1967).
C5NN3308C
End, front, 1.00"-16, LH threads for drag link with
power steering, 3.75" to center of post.
For tractors 5000, 7000, (1965 to 8-1967).
Replaces C5NN3308D.
E3NN3308BA
End, rear, 1.00"-16, for drag link with power
steering 3.75" to center of post.
For tie rod with power steering, tractors 5000,
7000, (1965 to 8-1967). Wide adjustable axle,
tractors: 8200, 8600, 9200, 9600, (1968 to
7-1976). Replaces C5NN3307F.
E3NN3307AA
Drag Link Dust Covers and
Nut
REPLACES
8M3332 Dust cover, steering drag link
front ball joint. For tractors: 8N,
NAA, 600, 800 {1948-1957}.
Dust cover, steering drag link
front ball joint. For tractors: 9N,
2N, {1939-1947}.
783332
Dust cover, steering drag link
front ball joint. For tractors: 9N,
2N, 8N, NAA, 600, 800,
{1939-1957}.
9N3324
Nut, steering drag link clamp for
tractors: 9N, 2N, 8N, NAA
{1939-1954}. Also for running
board to running board bracket
bolt. For tractors: 8N, NAA
{1948-1954}.
350947S
Bolt, steering drag link clamp. For tractors: 9N,
2N, 8N, NAA {1939-1954}.
357344S
Bolt kit, steering drag link clamp,
bolt, nut & washer kit {set of 4}.
For tactors: 9N, 2N, 8N, NAA
{1939-1954}.
357344-KIT
F-5-197www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
E3NN3307AA
C5NN3A300B
C5NN3307G
C5NN3308E
D0NN3A300A
E1NN3A300AA
D0NN3307A
C5NN3308C
E3NN3308BA
8M3332
783332
9N3324
350947S
357344S
357344-KIT
$28.19
$2.66
$8.19
$9.27
$24.05
$100.77
$98.55
$25.62
$34.83
$87.09
$22.98
$25.08
$2.66
$1.29
$1.29
Tie Rod EndsREPLACES
End, RH offset, threaded, 8-3/4" to center of
post. For tractors with short wheel base,
adjustable axles 8700, 9700, (8-1976 to 1978);
exc HD & wide axle on TW10, TW20, (1979 to
1982); 6710, 7710, (1981 to 10-1991); exc HD
& wide axle on TW5, TW15, TW25, TW35, (1983
to 2-1990). For tractors with long wheel base,
end LH, offset, threaded 8-3/4" to center of post.
Adjustable LH axles, 8700, 9700, (8-1976 to
1978); 6710, 7710, (1981 to 10-1991); 7910,
8210, (1982 to 10-1991).
E1NN3289AA
End, LH outer, 19.00" to center of post, for tie
rod with manual or power steering. For
tractors 4000 (LH & RH 1965 to 5-1967;
LH only 6-1967 to 1975);
4600 (1975 to 1981); 4610
(1981 to -).
C5NN3278A
End, RH outer, .750"-16 thread, 3.75" to center
of post, for tie rod with manual or power
steering. For tractors 4000 (6-1967
to 1975); 4600
(1975 to 1981);
4610 (1981 to -).
C5NN3289C
End, LH, straight, drilled, 8 holes, 31" to center
of post. For tractors with short wheel base,
adjustable axles 8700, 9700 (8-1976 to 1978);
exc HD & wide axle on TW10, TW20, (1979 to
1982); 6710, 7710, (1981 to 10-1991); exc HD
& wide axle on TW5, TW15, TW25, TW35, (1983
to 2-1990). For tractors with long wheel base,
adjustable axles. End, RH, straight, drilled, 8
holes, 31" to center of post. For tractors 8700,
9700, (8-1976 to 1978); 6710, 7710, (1981 to
10-1991); 7910, 8210, (1982 to 10-1991).
E1NN3280AA
End, LH outer, 15.375" to center of post, for tie
rod with power steering. For tractors
5000, 7000, (1965 to 1974); 5600, 6600,
7600 except front wheel drive, (1975 to
1981); 5610, 6610, 7610 except front wheel
drive, (1981 to 3-1985).
C7NN3281A
End, outer, notched (9), 19-5/8" to center of post.
For tractors with wide adjustable & all-
purpose axles 8200, 8600, 9200, 9600,
(1968 to 7-1976).
C7NN3280D
End, RH outer, 15.375" to center of post, for tie
rod with power steering. For tractors
5000, 7000, (1965 to 1975); 5600, 6600,
7600 except front wheel drive, (1975 to
1981); 5610, 6610, 7610
except front wheel drive,
(1981 to 3-1985).
C7NN3280E
End, rear, 1.00"-16, for drag link with power
steering 3.75" to center of post.
For tie rod with power steering, tractors 5000,
7000, (1965 to 8-1967). Wide adjustable axle,
tractors: 8200, 8600, 9200, 9600, (1968 to
7-1976). Replaces C5NN3307F.
E3NN3307AA
F-5-198www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
E1NN3280AA
C7NN3281A
C7NN3280D
C7NN3280E
E3NN3307AA
E1NN3289AA
C5NN3278A
C5NN3289C
$33.18
$77.30
$25.08
$30.36
$23.67
$35.45
$31.89
$35.79
End, tie rod, RH outer, RH threads, 4.250" to
center of post. For manual steering on
tractors 5000, 7000, (6-1967 to 1975);
5600, 6600, 7600, (1975 to 1981); 5610,
6610, (1981 to 1991). Replaces
C5NN3289D.
C7NN3289E
End, tie rod, LH outer, 17.500" to center of post.
For manual steering on tractors 5000,
7000, (6-1967 to 1975); 5600, 660, 7600,
(1975 to 1981); 5610, 6610, (1981 to
1991). Replaces C5NN3280N.
C7NN3280F
End, RH inner, 1.00"-16 thread, for tie rod with
power steering, 3.75" to center of post.
For tractors 5000, 7000, (9-1970 to 1975);
5600, 6600, 7600, (1975 to 1981); 5610,
6610, 7610, (1981 to 3-1985).
C7NN3289D
End, LH inner, for tie rod with power
steering, 18.125" to center of post. For
tractors 5000, 7000, (9-1970 to 1974);
5600, 6600, 7600, (1975 to 1981); 5610,
6610, 7610, (1981 to 3-1985).
C7NN3B161A
Tie rod end, LH outer, 5" to
center of post. For the tie
rod with power steering on
tractors 5610, 6610, 7610,
7810, (4-1985 to 10-
1991); 5610S, 6610S, 761OS, (1-1994
to -): 701OS (4-1996 to -)
E3NN3289AA
Tie rod end, RH outer, 1.27" dia.,
17.750" to center of
post. For tie rod with
power steering on tractors 5610, 6610
7610, (4-1985 to 10-1991); 7810 (2-1986
to 10-1991); 561OS, 661OS, 761OS,
781OS, (1-1994 to -), 7010S (4-1996 to -).
E3NN3278AB
F-5-199www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
C7NN3289E
C7NN3280F
C7NN3289D
C7NN3B161A
E3NN3289AA
E3NN3278AB
$43.05
$31.89
$25.13
$34.74
$68.31
$116.58
Front Spindles, Bushings & Thrust BearingsREPLACES
Thrust Bearing (C)Bushing (B)
Upper (U) or Lower (L)
Bushing Kit
(K)
Spindle (A)
Left
Spindle (A)
Right
Application
C0NN3123B2N31092N31062N3105Tractor: 9N, 2N5/16" x 1-1/8" keyway
C0NN3123B2N31098N3106B8N3105BTractor: 8N1/4" x 3/4" keyway
C0NN3123B2N31098N3106B8N3105BTractor: NAAC0NN3123B2N3109SBK5364NCA3106BNCA3105BTractor: 600, 700, 800, 900, 2000, 4000
NCA3110AC0NN3123B2N3109SBK5364957E3106957E3105Tractor: DEXTA, SuperDEXTA
NCA3110AC0NN3123B2N3109SBK5364C5NN3106RC5NN3105UTractor: 2000, 3000, 4000
NCA3110A(Except vineyard)2N3109C5NN3106NC5NN3105TTractor: 4000
(Except Orchard)C0NN3A299AC5NN3109ASBK6581C5NN3106JC5NN3105MTractor: 5000, 7000
C5NN3110A(Except hi clearance & orchard) (Not for10 x 16 front tires)
C0NN3A299AC5NN3109ASBK6581Tractor: 5000, 7000C5NN3110A(Except hi clearance & orchard) (For 10 x
16 front tires)C0NN3123B2N3109SBK5364C5NN3106RC5NN3105UTractor: 2600, 3600, 3900, 4100, 4600SU
NCA3110A(less cab/not for vineyard) 5/16" x 1-3/8"keyway
D4NN3106AD4NN3105ATractor: 4600(except SU, orchard, vineyard)
C0NN3A299AC5NN3109ASBK6581C5NN3106JC5NN3105MTractor: 5600, 6600, 7600C5NN3110A(Except hi clearance & orchard) (Not for
10 x 16 front tires)C0NN3A299AC5NN3109ASBK6581Tractor: 5600, 6600, 7600
C5NN3110Afor tractors with power steering(Except hiclearance & orchard) (For 10 x 16 fronttires)
C0NN3A299ATractor: 5700, 6700, 7700C0NN3A299AC5NN3109ASBK6581Tractor: 6600C, 7600C
C5NN3110AD4NN3106AD4NN3105ATractor: 4610
(except SU, orchard, vineyard)C0NN3A299AC5NN3109ASBK6581C5NN3106JC5NN3105MTractor: 5610, 6610, 7610
C5NN3110A(except hi clearance & orchard)C0NN3A299ATractor: 6710, 7710
F-5-200www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
SEE NEXT PAGE FOR PRICES
F-5-200-A
SPINDLE (A) RIGHT
2N3105 $74.60
8N3105B $84.06NCA3105B $85.46
957E3105 $85.46C5NN3105U $89.69
C5NN3105T $79.37
C5NN3105M $96.08
D4NN3105A $118.52
SPINDLE (B) LEFT
2N3106 $89.06
8N3106B $84.06NCA3106B $85.46
957E3106 $85.46
C5NN3106R $85.31
C5NN3106N $79.37
C5NN3106J $96.08
D4NN3106A $118.52
BUSHING KIT (K)
SBK5364 $13.83SBK6581 $17.12
BUSHING (B) UPPER (U) OR LOWER (L)
2N3109 $3.86
NCA3110A $2.97
C5NN3109A $4.46C5NN3110A $4.28
THRUST BEARING (C)
C0NN3123B $8.52
C0NN3A299A $13.82
CONN3123B $8.52
REPLACES Front Wheel Bearing KitsKits contain inner and outer cups and cones and oil seal. Complete
for one wheel.
Hub (J)Kit (I)Outer Bearings
Cup (H)
Outer Bearings
Cone (G)
Inner Bearings
Cup (F)
Inner Bearings
Cone (E)
Seal (D)Application
CBPN1200AB1217B1216B1202B1201NCA1190ATractor: 9N, 2N,8N, NAA 091960907415250
CBPN1200B8A1216A8A1216A8A1202A8A1201BNCA1190ATractor: 600, 700,800, 900 091950906715245
C9NN1104FCBPN1200CD5NN1217AD5NN1216AD5NN1202AD5NN1201ANCA1190ATractor: 601, 701,801, 901, 2000,4000
LM11910LM11949LM67010LM67048
C9NN1104FFW93WSD5NN1217AD5NN1216AD5NN1202AD5NN1201A957E1190ATractor: DEXTA,SuperDEXTA EHPN1200ELM11910LM11949LM67010LM67048
FW9814283352355XTractor: FORDSONMAJOR DIESEL
C9NN1104FFW93WSD5NN1217AD5NN1216AD5NN1202AD5NN1201A957E1190ATractor: 2000, 300EHPN1200ELM11910LM11949LM67010LM67048
C9NN1104EFW94WSD5NN1217AD5NN1216AC1VV1202AC1VV1201A310195Tractor: 4000EHPN1200CLM11910LM11949LM48510LM48548
C9NN1104DFW96WSC1VV1217AC1VV1216AWAA4222AWAA4221AE0NN1190AATractor: 5000, 7000EHPN1200DM12610M12649LM501310LM501349FW993125483125203125188L4221
024200247425521C9NN1104FFW93WSD5NN1217AD5NN1216AD5NN1202AD5NN1201A957E1190ATractor: 2600,
3600, 3900, 4100 EHPN1200ELM11910LM11949LM67010LM67048C9NN1104EFW94WSD5NN1217AD5NN1216AC1VV1202AC1VV1201A310195Tractor: 4600
EHPN1200CLM11910LM11949LM48510LM48548C9NN1104DFW96WSC1VV1217AC1VV1216AWAA4222AWAA4221AE0NN1190AATractor: 5600,
5700, 6600, 6700,7600, 7700
EHPN1200DM12610M12649LM501310LM501349
FW993125483125203125188L4221024200247425521
C9NN1104FFW93WSD5NN1217AD5NN1216AD5NN1202AD5NN1201A957E1190ATractor: 2610,3610, 3910, 4110 EHPN1200ELM11910LM11949LM67010LM67048
C9NN1104EFW94WSD5NN1217AD5NN1216AC1VV1201AC1VV1201A310195Tractor: 4610EHPN1200CLM11910LM11949LM48510LM48548
C9NN1104DFW96WSC1VV1217AC1VV1216AWAA4222AWAA4221AE0NN1190AATractor: 5610,6610, 6710, 7610,7710
EHPN1200DM12610M12610LM501310LM501349
Spindle SealsREPLACES
Felt seal, spindle felt seal.For tractors:
{1939-1947}. 9N, 2N.
9N3528
Seal spindle dust seal with groove and offset
rubber. For tractors: 8N, NAA, 600, 800
{1948-1957}.
8N3528
F-5-201www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
SEE NEXT PAGE FOR PRICES
F-5-201-A
SEAL (D)
NCA1190A $2.99
957E1190A $3.38
310195 $4.02
E0NN1190AA $4.41
INNER BEARINGS CONE (E)
B1201 $6.598A1201B $5.78
D5NN1201A $4.61
LM67048 $4.61355X $44.34C1VV1201A $5.06
LM48548 $5.06WAA4221A $4.89
8L4221 $8.87
LM501349 $4.89
INNER BEARING CUP (F)
B1202 $5.97
15250 $5.978A1202A $2.6315245 $2.63
D5NN1202A $2.00
LM67010 $1.89
352 $11.28
C1VV1202A $1.95LM48510 $1.95
WAA4222A $3.24LM501310 $3.24
312518 $8.46
25521 $8.46
OUTER BEARINGS CONE (G)
B1216 $10.4409074 $10.44
8A1216A $6.32
09067 $6.32
D5NN1216A $2.49
LM11949 $2.49
C1VV1216A $4.58
M12649 $4.58
312520 $13.8802474 $13.88
M12610 $1.83
OUTER BEARINGS CUP (H)
B1217 $3.4809196 $3.48
8A1216A $6.3209195 $3.60
D5NN1217A $1.47
LM11910 $1.47
14283 $35.31
C1VV1217A $1.83M12610 $1.83
312548 $8.45
02420 $8.45
KIT (I)
CBPN1200A $29.83
CBPN1200B $21.59CBPN1200C $14.60
FW93WS $12.90
EHPN1200E $12.90FW98 $65.58 FW94WS $14.48
FW96WS $16.35EHPN1200D $16.35
FW99 $39.50
EHPN1200C $14.48
FW93WS $12.90
HUB (J)
C9NN1104F $50.04C9NN1104E $50.30
C9NN1104D $60.18
SPINDLE SEALS
9N3528 $1.97
8N3528 $4.97
Wheel Clamp Lock NutREPLACES
Clamp lock nut, 3/4"-16 thread. For all Ford
models to date except some row crop.
LN10-2
Clamp lock nut, rear axle, 1-1/4". For tractors
8N, NAA.
LN10-21
Front Wheel Hubs & Caps
Hubs with bolts, less cups & bearings.
REPLACES
C9NN1104F Hub, front wheel. For tractors
Dexta, Super Dexta, for 6 hole
4.50" X 16" wheel (1957 to 1964);
for 6 hole 4.00 X 16" wheel on
tractors 2000, 3000, (1965 to
1975); 2600, 3600, 4100, (1975
to 1981); 2610, 3610, (1981 to -).
Uses bearing & seal kit
FW93-WS; wheel bolt
C5NN1107F & nut C5NN1012B.
Replaces 95731110,
C5NN1104B.
Hub, front wheel. For 6 hole 4.00
x 16" wheel on tractors 4000,
(1965 to 1975); 4600, (1975 to
1981); 4100, 4610, (1981 to -);
uses bearing & seal kit
FW94-WS; wheel bolt
C5NN1107F & nut C5NN1012B.
Replaces C5NN1104H.
C9NN1104E
Hub, front wheel. For 6 hole 5.50"
x 16" or 5.50" x 18" wheel on
tractors 5000, 7000 (1965-1975);
5600, 5700, 6600, 6700, 7600,
7700 (1975-1981); 5610, 6610,
6710, 7610, 7710 (1981-). Uses
bearings and seal kit FW96-WS;
wheel bolt C5NN1107F & nut
C5NN1012B. Replaces
C5NN1104F.
C9NN1104D
Hub cap, with grease fitting. For front wheel
with weight holes; 4.50" x 16" - 2500lb. capacity.
6 bolt-6" circle with 4.62" pilot for 5.50" x 6.00"
x 16" tires. Universal.
957E1139WF
Hub cap. For front wheel hub C9NN1104D.C5NN1130A
Cap, front wheel, EXACT of ORGINAL. For
tractors; 9n, 2n, 8n, NAA, 501, 600, 700, 800,
900, (1939 TO 1957).
2N1139B
Seal, front hub grease. For
tractors: 9N, 2N, 8N, NAA
{1939-1954}.
9N1190B
Front WheelsREPLACES
Front wheel, 5 lug. For tractors: 9N, 2N, (1939
to 1947). 9-3/4" center hole. Wheel uses 4.00 x
19 tire.
9N1015A
Front wheel, 6 lug. For tractors: 8N (1948 to
1952). Wheel uses 4.00 x 19 tire.
8N1015A
Front wheel with weight holes;
4.50" x 16"-2500 lb. capacity. 6
bolt-6" circle with 4.62" pilot for
5.50" x 6.00" x 16" tires.
Universal
8N1015D
Front wheel with weight holes;
5.50" x 16"-3300 lb. capacity. 6
bolt-6" circle with 4.62" pilot for
7.50" x 16" tires. Universal
C5NN1007A
Front wheel 8" x 16" ; 6 bolt, 6" circle, 4.62" pilot.D5NN1007A
Front Wheel Bolt & NutREPLACES
2N1012 Nut, front wheel. For trctors: 9N,
2N, 8N, NAA {1939-1954}.
Nut, front wheel, EXACT ofORIGINAL.Hex style 11/16" O.D. For
tractors; 9n, 2n (1939 to 1944).
9N1012
F-5-202www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
957E1139WF
C5NN1130A
2N1139B
9N1190B
LN10-2
LN10-21
C9NN1104F
C9NN1104E
C9NN1104D
9N1015A
8N1015A
8N1015D
C5NN1007A
D5NN1007A
2N1012
9N1012
$9.18
$58.67
$11.12
$20.55
$50.04
$50.30
$60.18
$7.46
$67.67
$4.95
$5.33
$126.30
$126.30
$102.38
$4.01
$3.66
Bolt, front wheel, 1/2"-20 x 1-3/4"
with serrated shoulder. For
tractors (1953-1985). Also used
with hubs C9NN1104D,
C9NN1104E, C9NN1104F.
C5NN1107F
Nut. Used for wheel bolt
C5NN1107F & others
(1939-1985).
C5NN1012B
Rear Wheel Rims, Bolts, Studs,
& Nuts
REPLACES
NCA1020B Rim, 10" x 28" wide base
demountable rim with 6 loop
clamps.
Bolt, rear rim center disc to rim,
for 28" wheels. 5/8"-18 x 2-3/4",
CGH head.
370938S36
Rim, 11" x 28" wide base demountable rim with
6 loop clamps.
C5NN1050E
Nut, 5/8"-18. For NCA1020B &
C5NN1050E wheels.
33806S7
Rim, 9" x 28" wide base
demountable rim with 6 loop
clamps. Fits tire size 11.2" x 28"
.
NCA1020C
Stud, with serrated shoulder for
rear brake drum. For tractors 8N,
NAA, 600, 700, 800, 900, 2000,
4000 (1958-1964).
312696
Rim, 12" x 28" , 6 loop clamps.
For tractors 80 and H.D. industrial
(optional) (1958-1962); 3055,
3100, 3120, 3150, 3190, 3300,
3310, 3400, 3500 (1965-1975);
3600 (1975-1981); 4100, 4600
(1978-1981); 2310, 2610, 3610,
4110, 4610, 340A, 340B, not for
square disc (1981-12/1985); 3230,
3930, not for square disc
(3/1990-1994). Replaces 313197,
31319729Z.
31319712G
Bolt, rear axle shaft to disc, for
6-bolt wheel. 3/4"-16 x 2-1/4". For
tractors Major, Super Major,
4000, 4100, 4110, 4600, 4610,
5000, 5600, 5610, 6000, 6700,
6710, 7000, 7600, 7610, 7700,
7710 (1965-1991).
C5NN1N118J
Nut, 5/8"-18, tapered. For rear
wheel disc to brake drum on
tractors 8N (1948-1952).
For rear wheel disc to rim on
tractors NAA, 600, 700, 800, 900,
2000, 4000 (1948-1964).
8N1134
Nut, 3/4"-16 x 1-1/2" hex.
Chamfered. For tractors Major,
Super Major, 4000, 4100, 4110,
4600, 4610, 5000, 5600, 5610,
6000, 6610, 6700, 6710, 7000,
7600, 7610, 7700, 7710
(1965-1991).
D3NN1120B
Bolt, 5/8"-18 x 2-3/16" rear axle
shaft to wheel disc and drum. For
tractors 2000, 4110 with
differential lock or less differential
lock (4/1965-1975); 3000 (except
3055 &3550) (1965-1975); 2600,
3600, 231, 234, 334, 531
(1981-4/1983). Use with nut
C5NN1120F.
C5NN1117R
Wheel Nut, 5/8"-18. Use with
wheel bolt C5NN1117R.
C5NN1120F
Flat washer kit, 5/8, rear wheels
and front axle bolts. Set of 16. For
tractors: {1939-1954}. 9N, 2N, 8N,
NAA.
351505K16
F-5-203www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
31319712G
C5NN1N118J
8N1134
D3NN1120B
C5NN1117R
C5NN1120F
351505K16
C5NN1107F
C5NN1012B
NCA12020B
370938S36
C5NN1050E
33806S7
NCA1020C
312696
$1.70
$0.45
$164.92
$157.11
$137.95
$1.67
$0.61
$2.22
$0.87
$1.07
$176.76
$3.90
$2.90
$2.21
$9.27
Flat washer kit, 5/8, rear wheels
and front axle bolts. Set of 6. For
tractors: {1939-1954}. 9N, 2N, 8N,
NAA.
351505K6
Flat washer, 5/8, rear wheels and
front axle bolts. For tractors;
{1939-1954}. 9N, 2N, 8N, NAA.
351505S8
Bolt, rear rim center disc to rim,
5/8x 18 x 2.282. For tractors:9N,
2N, 8N, NAA {1939-1954}.
350719S8
Rear Wheel DiscREPLACES
Disc, rear wheel 28" & 32", 8-bolt hub, 6-bolt rim.
For tractors: 8N (1948 to 1952), NAA, 600, 700,
800, 900, 2000, 4000, (1953 to 1964), 2000,
3000, 4000, (1965 to 1975), 2600, 3600, 3900,
4100, 4600, 5600, 5700, 6600, 6700, 7600,
7700, 231, 233, 333, 335, 420, 515, 531, 532,
535 (1975 to 1981), 2310, 2610, 2810, 2910,
3610, 3910, 4110, 4610, 230A, 234, 334, 530A
(1981 to 2-1990).
D9NN1036CA
Rear Wheel Power Adjust
Rims, Clamp, & Attaching
Parts
REPLACES
PAR10X28 Power adjust rim, 10" x 28", 4 rail
type. For double ramp clamp.
Holes in rail for stop body screw
are drilled parallel to axle (not at
angle). Use with stop body
C0NN1057A, stop body screw
C0NN1058A, clamp
E5NN1043AA.
Stop body, for power adjust rims
PAR10X28 and C5NN1050J. Use
with double ramp clamp
E5NN1043AA.
C0NN1057A
Screw, for stop body. Use with
power adjust rims PAR10X28 and
C5NN1050J.
C0NN1058A
Power adjust rim, 12" x 28", 4 rail
type. For double ramp clamp.
Holes in rail for stop body screw
are drilled parallel to axle (not at
angle). For tractors 3000
(1965-1975); 3600 (1975-1981);
2610, 3610, 4110 (1981-2/1990).
Use with stop body C0NN1057A
stop body screw C0NN105BA,
clamp E5NN1043AA.
C5NN1050J
Power adjust rim, 11" x 28", 4 rail
type. For double ramp clamp.
Holes in rail for stop body screw
drilled parallel to axle (not at
angle). Fits tire size 12.4" x 28",
13.6" x 28" . Use with stop body
screw C0NN1058A, clamp
E5NN1043AA.
C5NN1050H
Wheel clamp, disc to rim. Double
ramp type for power adjustable
rims. For 28" rim on tractors
2000, 3000, 4140 (10/1968-1975);
2600, 3600, 4100, 4600SU
(1975-1981); 2310, 2610, 2910,
3610, 3910, 4110, 4610, 4610SU
(except Baseldon models
(1981-3/1990); 3230, 3430, 3930,
4130, 4630, 4830LCG (3/1990-).
Use with rims PAR10X18 and
C5NN1050J.
E5NN1043AA
F-5-204www.tiscoparts.com fax: 800-356-5487 tel: 800-338-0145
© 2005 Woods Equipment Company. All rights reserved.
5WHEELS AND
AXLES
Replacement parts to fit
FORD
Arthur’s Tractors ~ www.ArthursTractors.com • 877-254-FORD (3673) • Fax: 724-349-3633 WE ARE NOT RESPONSIBLE FOR MIS-PRINTS OR PRICE CHANGES
C5NN1050J
C5NN1050H
E5NN1043AA
351505K6
351505S8
350719S8
D9NN1036CA
PAR10X28
C0NN1057A
C0NN1058A
$3.39
$0.66
$4.01
$184.04
$530.81
$20.25
$11.82
$507.98
$551.42
$22.10