Ford 289-351WPower Steering Bracket Kit

Driver Side 131108

For Use with Compressor Bracket Kit 131107 Only

900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 1 OF 7

18865 Goll St. San Antonio, TX 78266 ph: 210-654-7171 fax: 210-654-3113

2900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 2 OF 7

TM

Bracket Systems

-

Table of Contents 1. Cover 2. Table of Contents 3. Packing List/Parts Disclaimer 4. Power Steering Bracket Installation Figures 1 & 2 5. Power Steering Pump Installation 6. Belt Routing 7. Packing List

3900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 3 OF 7

TM

Bracket Systems

-

Packing List: Ford 289-351WDriver Side Power Steering Bracket Kit (131108)

No. Qty. Part No. Description

1.2.3.

** Before beginning installation, open all packages and check contents of shipment. Please report any shortages directly to Vintage Air within 15 days. After 15 days, Vintage Air will not be responsible for missing or damaged items.

111

136025136029191033

Ford 289-351W Driver Side Power Steering Front Bracket Ford 289-351W Driver Side Power Steering Rear BracketFord 289-351W Driver Side Power Steering Bracket Hardware Kit

1 2

3

4900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 4 OF 7

TM

Bracket Systems

-NOTE: Before tightening bolts, assemble all brackets loosely toengine. This will ensure proper alignment of all brackets.

1. Replace (1) 5.380” long spacer (provided with compressor bracket kit) (See Figure 1, below) with (1) 4.375” long spacer and (1) .875” long spacer (provided with power steering bracket kit) (See Figure 2, below). Install front and rear power steering brackets as shown.

Power Steering Bracket Installation

5.380 LSteel Spacer

Front Power SteeringBracket136025

Rear Power SteeringBracket136029

.875 LSteel Spacer

4.375 LSteel Spacer

NOTE: Do not tighten bolts untilpower steering pump is installedon front and rear brackets

Figure 1

Figure 2

5900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 5 OF 7

TM

Bracket Systems

-

Determine which power steering pump is being used, then install power steering pump to front and rear powersteering brackets as shown below.

Rear Power SteeringBracket136029

Rear Power SteeringBracket136029

Rear Power SteeringBracket136029

5/8-18 Jam Nut

(3) 3/8” x 3/4”Hex Bolts

1967-LaterPower Steering Pump

Pre-1967 FordPower Steering Pump

SaginawPower Steering Pump

1.

Power Steering Pump Installation

Front Power SteeringBracket136025

Front Power SteeringBracket136025

Front Power SteeringBracket136025

(3) 3/8” x 3/4”Hex Bolts

3/8” x 3/4”Hex Bolt

(2) .313” LSteel Spacers

3/8-16 x 1”Hex Bolt

3/8-16 x 2 ¾”Hex Bolt

2.090 L”Steel Spacer

(2) 3/8”Flat Washer

5/16”Nylon Locknut

6900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 6 OF 7

TM

Bracket Systems

-

Route belts as shown below. Vintage Air recommends using only Dayco, Gates or Goodyear brand reinforcedV-belts with this power steering bracket kit. Power Steering belt length of 53” is recommended. NOTE: Thiscan vary with the diameter of your water pump, crankshaft and power steering pump pulleys.

1.

Belt Routing

Crankshaft Pulley Grooves:

Front Groove ofWater Pump Pulley

Rear Groove ofCompressor Pulley

Power SteeringPump Pulley

Front Groove ofCrankshaft Pulley

Front

Balancer

1. Crankshaft, Water Pump, Compressor and Power Steering Pump2. Crankshaft, Water Pump and Alternator

1 2

900495 REV B 08/17/16 INSTRUCTIONS, BRACKET KIT 131108, PG 7 OF 7

TM

Bracket Systems

-

Checked By:Packed By:

Date:

Packing List: Ford 289-351WDriver Side Power Steering Bracket Kit (131108)

No. Qty. Part No. Description

1.2.3.

111

136025136029191033

Ford 289-351W Driver Side Power Steering Front Bracket Ford 289-351W Driver Side Power Steering Rear BracketFord 289-351W Driver Side Power Steering Bracket Hardware Kit

1 2

3