forces in two dimensions - pbworks
TRANSCRIPT
![Page 1: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/1.jpg)
Chapter 7
Forces in Two Dimensions
equilibrium, projectile and circular motion
![Page 2: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/2.jpg)
Two problems*
*answers on Thursday
Table lift demo: “Force
applied at an angle to the
direction of motion yields
less of an effect on the
object’s motion than force
applied in a straight line
with the motion.”
Draw a vector diagram to
show the forces and explain
the experience of the test
subject.
Derek left his physics
book on top of a drafting
table. The table is inclined
at a 35° angle. Find the
net external force acting
on the book, and
determine whether the
book will remain at rest in
this position. (given: Fg = 22N. Ff = 11N, FN
= 18N)
![Page 3: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/3.jpg)
the Energy and force story
![Page 4: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/4.jpg)
a quick review
what you already know
![Page 5: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/5.jpg)
An 1850 kg car is moving right at a constant
velocity of 1.44 m/s. What is the net force on the
car?
0 as long as speed is constant
review problem
![Page 6: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/6.jpg)
review problem .
What net external force is required to give a
25 kg suitcase an acceleration of 2.2 m/s2 to
the right?
a = F/m
2.2 = F/25 55 N
![Page 7: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/7.jpg)
review problem
A boat moves through the water with two
forces acting on it. One is a 2.10 X 103 N
forward push by the motor, and the other is a
1.80 X 103 N resistive force due to the water.
What is the acceleration of the 1200 kg boat?
Fnet = ma
2.10 X 103 - 1.80 X 103 = (1200)(a)
.3 X 103 /1200 = a 0.25 m/s2
![Page 8: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/8.jpg)
review problem
A dog pulls on a pillow with a force of 5 N at an
angle of 37° above the horizon. Find the x and y
components of this force.
37°
5N
x = 5cos37 3.9 N
y = 5sin37 3 N
![Page 9: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/9.jpg)
Sec. 7.1 forces in 2 dimensions
An object is in equilibrium
when the net force on it is 0.
an object is motionless
When in equilibrium
an object moves with
constant velocity
![Page 10: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/10.jpg)
Equilibrium – Occurs when the resultant of three or
more forces equals a net force of zero.
A
B
C
If A+B+C=0
Then A, B & C
are at
equilibrium
A
B
C
![Page 11: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/11.jpg)
If an object is in equilibrium,
all of the forces acting on it
are balanced and the net force
is zero.
If the forces act in two
dimensions, then all of the
forces in the x-direction and y-
direction balance separately.
The 2 forces acting in the
same direction are additive.
![Page 12: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/12.jpg)
It is much more difficult for
the gymnast to hold his arms
out at a 45-degree angle.
each arm must still support
350 N vertically to balance
the force of gravity.
Use the vertical force vector
(y-component) to find the
total force in each of the
gymnast’s arms (x
component).
350N each arm
vertically
This is the same as in our table
demonstration from yesterday.
Using what you know about
forces and equilibrium, draw a
vector diagram to show the
forces and explain the
experience of the test subject.
![Page 13: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/13.jpg)
The ball carrier and
tackler collide and are
still moving forward.
How can a 2nd tackler
stop the forward
motion (produce
equilibrium)?
![Page 14: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/14.jpg)
When 2 forces are
acting on an object
and the sum is not 0
– a 3rd force can be
added that produces
equilibrium.
*a force that produces equilibrium
![Page 15: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/15.jpg)
finding the equilibrant:
15
To find this force, first find the sum of the two forces already being exerted on the object.
This single force that produces the same effect as the two individual forces added together, is the resultant force.
![Page 16: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/16.jpg)
finding the equilibrant of A and B
16
equilibrant in the
opposite direction
The equilibrant force is one with the same magnitude as the resultant force, but in the opposite direction.
Forces are balanced
and the net force is 0
![Page 17: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/17.jpg)
Review: Components of vectors
Going backwards to resolve a resultant vector into
the vectors that produced it (vector resolution)
R x
+x
+y
R y
q
17
![Page 18: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/18.jpg)
To find the x component, Rx: cos θ = a/h
cos 40 = Rx/5.0km Rx = 5.0km (cos 40)
Rx = 3.8 km
To find the y component, Ry: sin θ = o/h
sin 40 = Ry/5.0km Ry = 5.0km (sin 40)
Ry = 3.2 km
R x
+y
+x
R y
q = 40o
18
3.8 km
3.2 km
![Page 19: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/19.jpg)
A 168N sign is hanging motionless by two ropes
that make 22.5° angles with the horizontal. What
is the tension in the ropes?
22.5 22.5
First identify all the forces involved.
Example problem pg. 151
![Page 20: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/20.jpg)
Equilibrium Problem Solving
Draw all forces on the object
Break forces into (x,y) components
Combine forces that are in the same direction
The sum of the forces must equal zero
![Page 21: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/21.jpg)
Fa Fb
Fw
Fa Fb
Fw
Break forces into horizontal
and vertical components.
Fax
Fay Fby
Fbx
![Page 22: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/22.jpg)
Fa
Fax
Fay
Fb
Fby
Fbx
Fay=Fasin22.5
Fax=Facos22.5
Fby=Fbsin22.5
Fbx=Fbcos22.5
Fa Fb
Fw
Fax
Fay Fby
Fbx
![Page 23: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/23.jpg)
Resolve Forces By Direction
Fa Fb
Fw
Fax
Fay Fby
Fbx
Fnetx=0
Fnetx= -Fax+Fbx
0=-Facos22.5+Fbcos22.5
Facos22.5=Fbcos22.5
Fa=Fb
Fnety=0
Fnety= 0 = Fay + Fby - Fw
0 = 2Fasin22.5 - Fw
2Fasin22.5 = Fw
Fa = 168N/2sin22.5
Fa = 220N = Fb
![Page 24: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/24.jpg)
Practice problems 1-4, pg. 151/152
![Page 25: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/25.jpg)
problem 2, pg 151:
An 8.0 N weight has one horizontal rope exerting a
force of 6.0 N on it.
a. What are the magnitude and direction of the
resultant force on the weight?
b. What force (magnitude and direction) is
needed to put the weight into equilibrium?
Draw a vector diagram
(Draw all forces on the object)
Break forces into (x,y) components
Combine forces that are in the same direction
Determine the equilibrant
![Page 26: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/26.jpg)
6.0 N
An 8.0 N weight has one horizontal rope exerting a force of 6.0 N on it.
a. What are the magnitude and direction of the resultant force on the weight?
8.0 N
FR ?
ϴ?
FX2 + FY
2 = FR2
FR = √(6.0 N)2 + (8.0 N)2 = 10 N
ϴR = 270⁰ + ϴy
ϴy = tan-1 (6.0/8.0) = 37⁰ ϴR = 270⁰ + 37⁰ = 307⁰
ϴy
FR = 10 N at 310⁰
b. What force
(magnitude and
direction) is needed
to put the weight into
equilibrium?
FE = 10 N at (307⁰ - 180⁰) = 10 N at 127⁰
![Page 27: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/27.jpg)
Forces on an Incline
![Page 28: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/28.jpg)
remember:
• Define your coordinates
• Draw a FBD
• Identify all forces.
• Resolve into x- and y- components.
![Page 29: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/29.jpg)
How do you determine if a body is in equilibrium?
• Assign a coordinate system
• Resolve all forces into their x- and y-components
• When ΣFx = 0 AND ΣFy = 0, then the object is in
equilibrium. (velocity will not change)
θ?
Fg = 22 N
Ff = 11N
FN = 18N
![Page 30: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/30.jpg)
Remember: normal forces are always
directed perpendicular to the surface
that the object is on.
As shown in the diagram, there are always at least two
forces acting upon any object on an inclined plane - the
force of gravity and the normal force. The force of gravity
(weight) acts in a downward direction; yet the normal
force acts in a direction perpendicular to the surface
![Page 31: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/31.jpg)
Analyzing the forces acting upon objects on inclined planes
involves resolving the weight vector (Fgrav) into two
perpendicular components - one directed parallel to the
inclined surface and the other directed perpendicular to the
inclined surface.
Together the two components replace the affect of the
force of gravity.
![Page 32: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/32.jpg)
The perpendicular component of the force of gravity is directed
opposite the normal force (balances the normal force).
The parallel component of the force of gravity is not balanced by any
other force.
An object will accelerate down the inclined plane due to the presence
of an unbalanced force. It is the parallel component of the force of
gravity that causes this acceleration. The parallel component of the
force of gravity is the net force.
![Page 33: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/33.jpg)
inclined plane problems can be simplified through a
useful trick known as "tilting the head."
Once the force of gravity has been resolved into its two components and the inclined plane has been tilted, merely ignore the force of gravity (since it has been replaced by its two components) and solve for the net force and acceleration.
![Page 34: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/34.jpg)
The task of determining the
magnitude of the two
components of the force of
gravity is a matter of resolving
the (resultant) gravity vector into
its two components, x and y
![Page 35: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/35.jpg)
example problem pg. 152
A trunk weighing 562 N is resting on a plane inclined
at 30°. Find the components of the weight force
parallel and perpendicular to the plane.
Fg,x = mg x sinθ (562)(sin 30°) = 281 N
Fg,y = mg x cosθ (562)(cos 30°) = 487 N
Fg
FN
30°
remember: sinθ = Fg,x/Fg
Fg = W = mg
remember: cosθ = Fg,y/Fg
Fg = W = mg
X
Y
![Page 36: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/36.jpg)
the short cut equation
Once you understand how to derive the components –
use the “shortcut” equations
The equations for the parallel and
perpendicular components are:
F = mg x sin θ
F = mg x cos θ
X+
y+
![Page 37: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/37.jpg)
In the absence of friction and other forces the acceleration
of an object on an incline is the value of the parallel (x)
component (mg x sin θ) divided by the mass (m). This yields
the equation:
a = g x sin θ
F = ma
mg x sin θ = ma
mg x sin θ/m = a
g x sin θ = a
![Page 38: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/38.jpg)
a 1000-kg roller coaster on
the first drop of a roller
coaster ride is at an angle
of 45°.
Determine the net force on
the riders and acceleration
of the roller coaster car.
(Assume a negligible affect of
friction and air resistance.)
try an example…
![Page 39: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/39.jpg)
Fgrav = m • g = (1000 kg) • (9.8 m/s2) =
9800 N
The parallel and perpendicular components of the gravity force can be determined from their respective equations:
Fll(x) = mg • sin 45° = 6930 N Fperpendicular = mg • cos 45° = 6930 N
![Page 40: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/40.jpg)
There are no other forces to counteract the parallel component of gravity (x). the net force = the Fll value.
The forces directed perpendicular to the incline balance each other.
Fnet = 6930 N, down the incline (the force on the riders)
The acceleration: a = Fnet /m: = 6930 N/1000 kg
a = 6.93 m/s2, down the incline
![Page 41: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/41.jpg)
when other forces are involved…
The perpendicular component of force balances the normal force. Now the frictional force must also be considered when determining the net force of the X (parallel) component. The two parallel forces must be added to determine the net force. The parallel component and the friction force add together to yield 5 N. The net force is 5 N, directed along the incline towards the floor.
In the presence of friction (or other forces), the situation is slightly more complicated.
![Page 42: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/42.jpg)
will the physics book slide?
Known: unknown:
Fg = 22 N ΣFx = 0
Ff = 11N ΣFy = 0
FN = 18N
θ = 35°
need to determine the x and y components for the Fg
35°
Fg = 22 N
FN = 18N
![Page 43: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/43.jpg)
35°
Fg = 22 N
FN = 18N Ff = 11N Fx = mg x sin θ
Fy = mg x cos θ
Fy = 22 x cos 35
= 18 N
ΣFN – Fy = 0
The parallel forces determine if the book will slide
Fx= 22 x sin 35
= 12.6 N know Ff = 11N
ΣFx – Ff = 12.6 – 11 = Fnet of 1.6 N downward – the book will slide
![Page 44: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/44.jpg)
try another problem
a 100-kg crate is
sliding down an
inclined plane at an
angle of 30°.
The coefficient of
friction between the
crate and the incline is
0.3.
Determine the net force and acceleration of the crate.
![Page 45: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/45.jpg)
quick review – coefficient of friction
Ffriction = μFN Lee Mealone is sledding with his
friends when he becomes
disgruntled by one of his friend’s
comments. He exerts a rightward
force of 9.13N on his 4.68 kg sled
to accelerate it across the snow. If
the acceleration of the sled is
0.815 m/s2, what is the coefficient
of friction between the sled and
the snow?
![Page 46: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/46.jpg)
known: Fapplied = 9.13N,right m = 4.68 kg a = 0.815
m/s2 unknown: μ between sled and snow
FN = Fg
9.13N
Ffriction = μFN
Fg = ma
= (4.68)(9.8)
= 45.86 N
FN
Fg
Fnet = 0 because the sled has an acceleration
Fnet = (4.68)(0.815) = 3.81 N, right so Fapp > Ff
Ff = Fnet – Fapp = 3.81N – 9.13N = 5.32N, left
μ = Ff/FN = 5.32/45.86 = 0.116
![Page 47: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/47.jpg)
one more A 405N rightward force is used to drag a
large box across the floor with a constant
velocity of 0.678 m/s. The coefficient of
friction between the box and the floor is
0.795. Determine the mass of the box.
known:
Fapp = 405N,right μ = 0.795 a = 0
unknown: m of the box
405 N
Velocity is constant so all forces are balanced,
therefore: Fapp = Ffriction = 405 N AND FN = Fg
FN = Ff /μ = 405/0.795 = 509.43N
FN = Fg so 509.43N = m(9.8) = 51.98 kg
![Page 48: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/48.jpg)
back to a problem on an incline……
a 100-kg crate is sliding
down an inclined plane
at an angle of 30°.
The coefficient of friction
between the crate and
the incline is 0.3.
Determine the net force and acceleration of the crate.
![Page 49: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/49.jpg)
First: find the force of gravity acting on the crate and the components of this force parallel and perpendicular to the incline.
The force of gravity (W = mg) is 980 N The components of this force are Fll(x) = 490 N (980N • sin30°)
and Fy = 849 N (980 N • cos30°).
Now the normal force can be determined to be 849 N (it must
balance the perpendicular component of the weight vector).
100 kg
Determine the net force and acceleration of the crate.
![Page 50: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/50.jpg)
The net force is the vector sum of all the forces.
The forces directed perpendicular to the incline balance;
The forces directed parallel to the incline do not balance.
Fnet = 490 N - 255 N = 235 N
acceleration is Fnet/m = 235 N/100 kg) = 2.35 m/s2.
Determine the force of friction Ffrict = μFN = 0.3 x 849 N = 255 N
![Page 51: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/51.jpg)
Try another (example pg. 153)
A 62 kg person on skis is going down a hill sloped at
37°. The coefficient of kinetic friction between the
skis and the snow is 0.15. How fast is the skier
going 5.0 s after starting from rest?
37°
Fg = mg = 62(9.8) = 607.6
Fx = sin 37° x mg = 365.7N
Fy = FN = cos 37° x mg = 485.2N
Ffriction = μFN
= (.15)(485.2) = 72.78N
Fnet = Fx – Ff = 365.7 – 72.78 = 292.9N
![Page 52: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/52.jpg)
Fnet = Fx – Ff = 365.7 – 72.78 = 292.9N
a = Fnet/m
= 292.9/62
= 4.72 m/s2
Vf = V0 + at
= (4.72)(5s)
= 23.6 m/s
![Page 53: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/53.jpg)
Practice problems 5-8, pg. 154
Study guide problems
Worksheet problems
![Page 54: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/54.jpg)
Projectile Motion Sec. 7.2
The most common example of an object moving in two dimensions
is a projectile.
![Page 55: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/55.jpg)
After a projectile has been given initial thrust, it moves only by the force of gravity (ignoring air resistance).
If you know the initial thrust on a projectile your can figure out its trajectory**.
** its path
![Page 56: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/56.jpg)
types of projectiles
A projectile is any object that once projected continues in
motion by its own inertia and is influenced only by the
downward force of gravity.
![Page 57: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/57.jpg)
Remember: A force is not required to keep an object in motion. A force is only required to maintain an acceleration.
Gravity is the downward force on a projectile that influences
its vertical motion and causes the parabolic trajectory that is
characteristic of projectiles.
![Page 58: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/58.jpg)
Recap:
• A projectile is an object upon which the only force is
gravity.
• Gravity acts to influence the vertical motion of the
projectile, thus causing a vertical acceleration.
• The horizontal motion of the projectile is the result of
the tendency of any object in motion to remain in motion
at constant velocity.
• Due to the absence of horizontal forces, a projectile
remains in motion with a constant velocity. Horizontal
forces are not required to keep a projectile moving
horizontally.
The only force acting upon a projectile is gravity!
![Page 59: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/59.jpg)
There are the two components of the projectile's motion - horizontal and vertical motion (they are independent of each other).
Horizontal motion: Law of inertia (absence of gravity)
Vertical motion: acceleration of gravity
Only a vertical force acts on the projectile.
the projectile travels with a constant horizontal velocity and
a downward vertical acceleration.
![Page 60: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/60.jpg)
Horizontal motion
The ball’s horizontal velocity remains constant while it falls because gravity does not exert any horizontal force.
Since there is no force, the horizontal acceleration is zero (ax = 0).
The ball will keep moving to the right at 5 m/sec.
![Page 61: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/61.jpg)
Vertical motion
The vertical speed (vy) of the
ball will increase by 9.8 m/sec
after each second.
After one second has passed,
vy of the ball will be 9.8 m/sec.
After 2 seconds have passed,
vy will be 19.6 m/sec and so on.
![Page 62: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/62.jpg)
Remember for “cliff” problems:
Horizontal and vertical motion act independently
vtdx = 2
2
1atd y =
vfx = vix = constant vfy = viy - gt
![Page 63: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/63.jpg)
Projectile motion
is a combination
of horizontal and
vertical motion
but neither
affects the other
![Page 64: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/64.jpg)
ANALYSIS OF MOTION
ASSUMPTIONS:
• x-direction (horizontal): uniform motion
• y-direction (vertical): accelerated motion
• no air resistance
QUESTIONS:
• What is the trajectory?
• What is the total time of the motion?
• What is the horizontal range?
• What is the final velocity?
![Page 65: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/65.jpg)
Solving projectile problems: pg 156
Horizontal motion - same as constant velocity problems (1D)
a = 0 v = d/t dx = vt
Vertical motion – solve like a free fall problem
v = at a = v/t a = -g dy = -1/2at2
Time*
*solve for either -- same for both
![Page 66: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/66.jpg)
How fast is the ball thrown?
![Page 67: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/67.jpg)
Vertical dy = -1/2at2
5 = -.5(9.8)t2
t= 1 second
► Horizontal d = vt
► v = d/t
► v= 20m/1s
► v= 20 m/s
The ball is thrown at 20 m/s
![Page 68: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/68.jpg)
example pg. 157
A stone is thrown horizontally at 15 m/s from the
top of a cliff 44 m high.
a. How far from the cliff does it hit the ground?
b. How fast is it moving when it hits?
Know:
vx = 15 m/s
a = -g
vy = 0
Want to know:
x when y= - 44m
v at that time
a. Solve for t in the air t = √-2d/a t = √ -2(44 m) = 3 s dy = -1/2at2 -9.8 m/s/s
![Page 69: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/69.jpg)
b. How fast is it moving?
t = 3s
dx = vt = (15 m/s)(3.0 s) = 45 m
vy = -gt = (-9.8 m/s/s)(3.0s) = -29 m/s
v2net = v2x + v2y
v = √ (15 m/s)2 + (-29 m/s)2 = 33 m/s
vy
vx
![Page 70: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/70.jpg)
one more example (#11, pg 158):
A steel ball rolls with constant velocity across a tabletop
0.95 m high. It rolls off and hits the ground 0.352 m from
the edge of the table. How fast was it rolling?
vy = 0 y = -1/2gt2 t = √-2y/g
t = √ -2(-.95 m) = 0.44 s 9.8 m/s/s
vx = d/t v = 0.352 m/ 0.44s = 0.800 m/s
0.95 m
![Page 71: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/71.jpg)
another example problem
Wile E. Coyote accidentally runs off a cliff horizontally at
8.0 m/s. The cliff is 64 m high. How far from the base of
the cliff should the road runner find him?
![Page 72: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/72.jpg)
d = vxt = (8 m/s)(3.6s) = 28.8 m
Formulas: vx = d/t y = -1/2gt2
rearrange: d = vxt t = √2y/g
solve for time: t = √2(64) / 9.8 = 3.6 s
Use time to solve for dx
![Page 73: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/73.jpg)
Example problem
1. You know the initial speed and the time.
2. Use relationships: y = – ½ gt2 and x = vox t
3. The car goes off the cliff horizontally, so voy = 0. Solve:
y = – (1/2)(9.8 m/s2)(2 s)2 y = –19.6 m. (negative means the
car is below its starting point)
Use x = voxt, to find the horizontal distance: x = (20 m/s)(2 s)
x = 40 m.
A stunt driver steers a car off a cliff at a
speed of 20 meters per second. He
lands in the lake below two seconds
later. Find the height of the cliff and
the horizontal distance the car
travels.
![Page 74: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/74.jpg)
A cow walks off a bridge at a speed of 2 m/s. It takes 9
seconds for the cow to land.
a) How far away from the base of the
bridge will the cow land?
V = d / t
2 m/s = d / 9 s
d = 18 m
![Page 75: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/75.jpg)
Recall that the cow walked at a speed of 2 m/s and
took 9 seconds to land.
b) How tall is the bridge?
d = ½ g x t2
d = ½ (10m/s2) x 9 s2
d = 405 m
![Page 76: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/76.jpg)
While driving Eleanor his freshly boosted 1967 Shelby
Mustang, Randall “Memphis” Reines decides to
escape from Det. Castlebeck by jumping over a car
accident using the flat bed tow truck. The bed of the
tow truck is 4 m high and Eleanor is traveling at 44
m/s.
How long does it take for Eleanor to reach the ground on
the other side of the car accident?
How far horizontally from the
end of the tow truck bed did
Eleanor fly?
Gone in 60 seconds
![Page 77: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/77.jpg)
How long does it take for Eleanor to hit the ground on the
other side of the accident?
d = ½ g x t2
t = √2 d / g
t = √ 2 (4 m)/(10 m/s2)
t = 0.9 s
How far horizontally from the end
of the tow truck bed did Eleanor fly?
v = d / t . d = v x t
. d = 44 m/s x 0.9 s
. d = 39.6 m
![Page 78: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/78.jpg)
Be sure to have all these formulas:
Horizontal:
Vx = Vxo
x = Vxt
Vertical:
y = 1/2 gt2 (on the cliff problems only)
Vy = Vyo - gt
y = Vyot - 1/2 gt2
Vy2 = Vyo
2 - 2gy
![Page 79: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/79.jpg)
non-horizontally launched projectiles
(7.2 Projectile Motion at an angle)
How can you predict the range of a launched marble?
![Page 80: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/80.jpg)
Projectile Motion and the Velocity Vector
The path a projectile
follows is called its
trajectory.
The distance the
projectile travels is its
range.
![Page 81: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/81.jpg)
Projectiles launched at an angle
A soccer ball kicked off the ground is a projectile, but it starts with an initial velocity that has both vertical and horizontal components.
*The launch angle determines how the initial velocity divides
between vertical (y) and horizontal (x) directions.
![Page 82: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/82.jpg)
Calculating the components
of a velocity vector
1. Draw a free-body diagram
2. Use vx = v cos θ and vy = v sin θ.
3. Solve:
vx = (10 m/s)(cos 30o) = (10 m/s)(0.87) = 8.7 m/s
vy = (10 m/s)(sin 30o) = (10 m/s)(0.5) = 5 m/s
A soccer ball is kicked at a speed of 10
m/s and an angle of 30 degrees. Find
the horizontal and vertical components
of the ball’s initial velocity.
![Page 83: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/83.jpg)
practice problem:
finding vector components
Find the component velocities
for a helicopter traveling 95
km/hr at an angle of 35° to the
ground.
vx = v(cos θ) (95 km/hr)(cos 35) = 78 km/hr
vy = v(sin θ) (95 km/hr)(sin 35) = 54 km/hr
θ
95 km/hr
![Page 84: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/84.jpg)
Calculating acceleration on an incline
Calculate the y component of the submarine’s ascent:
vy = (10 m/s)(sin 35o) = 5.7 m/s Calculate the time to ascend 250 m
?s/5.7 m X 250 m = 43.8 s
A submarine is moving at 10 m/s
toward the surface at an angle of
35° from the ocean floor. How long
will it take to surface if it is 250 m
deep?
practice problem:
![Page 85: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/85.jpg)
The horizontal distance a projectile moves can be
calculated according to the formula:
![Page 86: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/86.jpg)
The vertical component of velocity alone is responsible for
giving the projectile its vertical height AND "hang" time.
y= -1/2gt2
![Page 87: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/87.jpg)
"Hang Time"
You can easily calculate your own hang time.
Run toward a doorway and jump as high as you can, touching the wall
or door frame.
Have someone watch to see exactly how high you reach.
Measure this distance with a meter stick.
The vertical distance formula can be rearranged to solve for time:
![Page 88: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/88.jpg)
Calculating range and velocity
punkin chunkin trailer
world record air cannon
George Fox
Univ.
Human powered
![Page 89: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/89.jpg)
Upwardly Launched Projectiles What’s missing?
What’s
staying the
same?
![Page 90: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/90.jpg)
What does gravity do to its horizontal speed?
NOTHING!!!!
But its vertical speed when it lands will equal the
speed at which at was launched.
![Page 91: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/91.jpg)
Example of a Cannon
![Page 92: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/92.jpg)
Which cat will go further?
A B C
![Page 93: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/93.jpg)
Which cat will go higher?
A B C
![Page 94: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/94.jpg)
Which cat will be in the air longer?
A B C
![Page 95: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/95.jpg)
What determines how far the projectile
will go?
The initial angle of the projectile and its
horizontal velocity determine its range.
![Page 96: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/96.jpg)
Projectiles launched at the same speed but
different angles.
What do you notice about the diagram?
![Page 97: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/97.jpg)
A ball launched at a
steep angle will have a
large vertical velocity
component and a small
horizontal velocity.
![Page 98: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/98.jpg)
A ball launched at a
low angle will have a
large horizontal
velocity component
and a small vertical
one.
![Page 99: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/99.jpg)
Which angle produces the largest range for the
projectile?
45o
Which angle will produce
the longest hang time
for the projectile?
90o
![Page 100: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/100.jpg)
The range of a projectile is calculated from the
horizontal velocity AND the time of flight.
If a ball is kicked at the same speed, angles that add up
to 90 degrees have the same range.
![Page 101: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/101.jpg)
In those cases in which the vertical displacement is zero,
the horizontal displacement (also known as range) can be
expressed in terms of initial launch speed and angle:
![Page 102: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/102.jpg)
Shot Put - 45º is not the ideal angle, why?
You are already off the ground 1-2 meters.
![Page 103: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/103.jpg)
boy, have we got problems!!!
take some of these on
![Page 104: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/104.jpg)
Be sure to have all these formulas:
Horizontal:
Vx = Vxo
x = Vxt hang time
Vertical:
y = - 1/2 gt2 (on the cliff problems only)
Vy = Vyo - gt
y = Vyot - 1/2 gt2
Vy2 = Vyo
2 - 2gy range
![Page 105: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/105.jpg)
An Australian football is kicked at an angle of 37.0° with a velocity of 20.0 m/s. Find: (a) the max height, (b) the time in air before striking the ground, (c) the horizontal distance traveled, (d) the velocity vector at the max height, and (e) the acceleration vector at max height.
![Page 106: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/106.jpg)
Horizontal Vertical
Displacement ? ?
Time ? ?
Initial Velocity Vo cos 37.0o Vo sin 37.0o
Average
Velocity ? ?
Final Velocity ? ?
Acceleration 0 9.8 m/s/s
Here’s what we know:
Where do you begin?
Look at the formulas again, they’re taunting you aren't they?
![Page 107: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/107.jpg)
set-up the table and we can see we can find initial velocity for both the horizontal and vertical:
Vxo = Vo cos 37.0o = (20.0 m/s)(0.799) = 16.0 m/s Vyo = Vo sin 37.0o = (20.0 m/s)(0.602) = 12.0 m/s
(a)The max height is attained where Vy = 0, this occurs when t = Vyo/a, ergo (12.0 m/s)/(9.80 m/s2) =
1.22 s
fill in the table as we go along
Time for another formula: y = Vyot -
1/2 gt2
= (12.0 m/s)(1.22 s) - 1/2(9.80 m/s2)(1.22 s)2 = 7.35 m.
![Page 108: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/108.jpg)
(b) To find the time it takes for the ball to return to the ground, we use the following equation and set y = 0 (for ground level).
y = Vyot - 1/2 gt2
0 = (12.0 m/s)t - 1/2(9.80 m/s2)t2
thus, t = 2(12. m/s)/(9.80 m/s
2 ) = 2.45 s
you might have found t = 0, this is a solution, congratulations, but it is wrong, it is 0 when the initial point y is zero.
![Page 109: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/109.jpg)
(c) The total distance traveled horizontally is found by applying the equation x = Vxot, remember: a = 0,
(remember from your table: Vxo = 16.0 m/s)
x = (16.0 m/s)(2.45 s) = 39.2 m
![Page 110: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/110.jpg)
(d) The velocity at max height At the max height there is no vertical component to the velocity, only horizontal.
so v = Vxo cos 37.0o = 16.0 m/s.
(e) The acceleration vector at max height The acceleration vector is always 9.80 m/s2 downward.
![Page 111: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/111.jpg)
are you ready??
Test – Wednesday!!!
![Page 112: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/112.jpg)
Calculating acceleration on an incline
1. You know the mass, friction force, and angle.
2. Use relationships: a = Fnet ÷ m and Fx = mg sinθ.
3. Calculate the x component of the skier’s weight:
Fx = (50 kg)(9.8 m/s2) × (sin 20o) = 167.6 N
Calculate the force: Fnet = 167.6 N – 30 N = 137.6 N
Calculate the acceleration: a = 137.6 N ÷ 50 kg = 2.75 m/s2
A skier with a mass of 50 kg is on a
hill making an angle of 20 degrees.
The friction force is 30 N. What is
the skier’s acceleration?
![Page 113: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/113.jpg)
Tuba Tony gets into a fight with his girlfriend Charity the
Cheer Queen at the last home football game of the year.
While Tuba Tony is on the field during the half time show,
Charity throws Tony’s class ring off the top of T-bird
Stadium. .
The stadium is 10 m high and the ring was thrown at a
velocity of 10 m/s. Tony, distraught over the loss of his
class ring decides to search for it. Let’s use physics to
determine where he should look!
How long does it take for Tuba Tony’s ring to hit the
ground?
How far horizontally from the base of the stadium does
Tuba Tony’s class ring land?
![Page 114: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/114.jpg)
How long does it take for Tuba Tony’s ring to hit
the ground?
y = ½ gt2
t = √ 2y/g
t = √2(10 m) / (10 m/s2)
t = 1.41 s
How far horizontally from the
base of the stadium does Tuba Tony’s
class ring land?
v = d / t d = v x t
. d = 10 m/s x 1.41 s
. d = 14.1 m
![Page 115: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/115.jpg)
Pirate monkeys on a boat are positioned at rest
100 m from the base of a 40 m high cliff. A
cannon sits on the cliff and fires horizontally at
the boat with a velocity of 35 m/s.
Will the cannonball hit the boat?
100 m
40 m
35 m/s
![Page 116: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/116.jpg)
How long will it take the cannonball to hit the water?
d = ½ g t2
t = 2d / g
t = 2(40m) / (10m/s2)
t = 2.83 s
How far will it travel horizontally
from the base of the cliff?
v = d / t . d = v x t
d = 35 m/s x 2.83 s
=
99.05 m
![Page 117: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/117.jpg)
A mountain climber encounters a crevasse in an ice field.
The opposite side of the crevasse is 2.75 m lower and is
separated horizontally by a distance of 12 m. To cross the
crevasse, the climber gets a running start and takes off
horizontally. What speed will the climber have to take off
to make it safely cross?
![Page 118: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/118.jpg)
Choose a formula:
y = – 1/2gt2
Solve for time:
-2.75 = -1/2gt2
t = 0.75 s
Calculate the horizontal velocity needed:
x = vxt v = x/t
= 12/.75 = 16 m/s
![Page 119: Forces in Two Dimensions - PBworks](https://reader033.vdocuments.us/reader033/viewer/2022042013/6255b05cf70e5d504c7bb052/html5/thumbnails/119.jpg)
A hunter aims his arrow directly at a target (on the same
level) 100 m away. If the arrow leaves the bow at a
speed of 75 m/s, by how much will it miss the target?
What should be the launch angle to hit the target?
1.3 s