for use in log-loading, road building and harvester ......hydraulic system open-center system, (2)...

Engine

Isuzu AH-6HK1XYSS Tier 3 turbocharged diesel engine with electronic fuel control, 6-cylinder, water-cooled, EGR with cooler, air-to-air intercooler, fuel cooler, auto idle start, neutral safety start, glow plugs, auto warm-up, EPF engine protection, dual stage fuel filtration, remote oil filter, green plug oil drain.SAE net horsepower .............. 271 HP (202 kW) @ 2,000 rpmDisplacement ................................................................... 7.8 LMaximum torque............... 797 lbf-ft (1,080 N-m) @ 1,500 rpmStarter..................................................................... 24V-5.0kWAlternator...................................................................... 50 ampBattery ............................................. (2) 12-volt 128 amp hours

Cab and Controls

Oregon OSHA certified side-entry forestry cab, KAB® 855 air-suspension seat with belt, Control panel with illuminated soft-touch switches, LCD monitor, Low-effort controls pre-wired for auxiliary hydraulics, Sliding 4-position tilting control consoles, Climate control, Sky roof, (2) Intermittent windshield wipers with washer, Single pedal travel, Travel alarm, Footrests, Cup holder, 12-volt outlet, Digital clock, 24-volt cigarette lighter, Ashtray, Dome lights, Coat hook, Adjustable horn, Mirror, Handrails with deflector, Floor mat, Emergency exit.Selectable working modes, Anti-theft password protection system, On-board self-diagnostic system with memory, Auto-idling system, One-touch decelerator, Auto power boost on RoadBuilder model, Gate lock safety shutoff.A/C output......................................................... 18,250 BTU/hrHeater output.................................................... 20,240 BTU/hr

Hydraulic System

Open-center system, (2) variable displacement axial piston pumps, (1) gear pump for pilot controls, (1) gear pump/valve for grapple rotate, Main control valve with one 4-spool valve and one 5-spool valve with auxiliary spool, Programmable auxiliary pump settings with single or double pump control, Double-acting auxiliary hydraulics and rotate circuits plumbed to boom foot, Grapple Circuit Control Valve for Live-Heel attachment (Squeeze circuit), Processor return line fitting, Oil cooler, O-ring face seals, High-performance 6-micron return filter, Firewall.Hydraulic PumpsMaximum flow .............................. 2 x 79.3 gpm (2 x 300 l/min)Pilot pump maximum flow ........................... 7.9 gpm (30 l/min)Auxiliary pump maximum flow.................. 9.7 gpm (36.8 l/min)Relief Valve SettingsBoom up/arm/tool....................................... 4,970 psi (343 bar) in Power-Boost Mode.............................. 5,410 psi (373 bar)Boom down ................................................ 3,970 psi (274 bar)Swing circuit ............................................... 4,260 psi (294 bar)Travel.......................................................... 4,970 psi (343 bar)Hydraulic Oil FiltrationReturn filter................................................................. 6 micronPilot filter..................................................................... 8 micronSuction screen....................................................... 105 micron

Swing

Planetary reduction powered by axial piston motor. Internal ring gear with grease cavity for swing pinion. Swing bearing is single-row shear type ball bearing. Mechanical disc swing brake. Auto power swing. Free swing control.Swing speed........................................................... 0 – 7.5 rpmTail swing..........................................................Swing torque ...................................

Undercarriage

High-Wide track gauge with x-pattern carbody, Full-length track guards, Sealed and strutted track chain, Sealed rollers and idlers, Idler mount reinforcement, Two-speed independent hydrostatic travel with compact planetary final drive, HD travel motor covers, Disc type brakes, Adjustable track tension, HD swivel guard - hinged.Carrier rollers............................................................ 2 per sideTrack rollers.............................................................. 9 per sideTrack link pitch.................................................Shoes ..................................................................... 50 per sideShoe width.......................................................Ground Pressure

......... 10.17 psi (.701 bar).... 8.14 psi (.561 bar)

Lubricant and Coolant Capacity

Fuel tank............................................... 153.22 gal. (580 liters)Hydraulic tank......................................... 46.23 gal. (175 liters)Hydraulic system.................................... 92.46 gal. (350 liters)Final drive (per side)................................ 2.91 gal. (11.0 liters)Swing drive.............................................. 2.77 gal. (10.5 liters)Engine oil............................................... 10.04 gal. (38.0 liters)Cooling system........................................ 7.93 gal. (30.0 liters)

Travel System

Two-speed independent hydrostatic travel with compact axial piston motors. Hydraulic motor powered output shaft coupled to a planetary reduction unit and track sprocket. All hydraulic components mounted within the width of side frame. Automatic downshift. Single pedal travel. Spring applied, hydraulically released disc parking brake built into each motor. Each travel motor equipped with counterbalance valve to prevent overspeeding down an incline.Max. travel speed .......................... 2.1 - 3.2 mph (3.3 - 5.1 km/h)Drawbar pull ................................................. 62,542 lbf (278 kN)Gradeability ................................................................ 70% (35°)

Logging Attachment with Live-Heel

Equipped with Anti-drift transportation valve, Arm cylinder guard, Grapple Circuit Control Valve (squeeze circuit)Boom................................................................Arm...................................................................

RoadBuilder Attachment

Equipped with High-Lift boom relocation bracketBoom................................................................Arm...................................................................

Butt-N-Top Attachment

Equipped with Anti-drift transportation valve, Arm cylinder guardBoom................................................................... 23´ 2 (7.06 m)Arm...................................................................... 16´ 4 (4.98 m)

Operating Weight

Working weight with OROSHA side-entry forestry cab,

............................................................. 99,848 lbs (45 290 kg)For rear-entry cab................................... Add 700 lbs (317 kg)

Working weight with OROSHA side-entry forestry cab,

................ 96,233 lbs (43 650 kg) ....................... Add 148 lbs (67 kg)

For Use in Log-Loading, Road Building

and Harvester Processing Applications

Working Ranges

Lift Point

11′ 11″3.64 m

16′ 11″5.17 m

51′ 5″15.7 m

11′ 5″3.49 m

12′ 1″3.7 m

4′ 9″1.46 m4′ 0″

1.2 m

2″40 mm

9′ 8″2.94 m

11′ 4″3.4 m

5′ 11″1.80 m

6′ 0″1.82 m

11′ 11″3.62 m

2′ 4″700 mm13′ 9″

4.18 m

4′ 2

″1.

26 m

2′ 4″723 mm

Machine equipped with

logging attachment

A.

B.

C

D

E

Lifting Capacities

´ ´Radius of Load

End Side End Side End Side End Side End Side End Side End Side

13.72 m (kg)

12.19 m (kg)

10.66 m (kg)

9.14 m (kg)

7.62 m (kg)

6.10 m (kg)

4.57 m (kg)

3.05 m (kg)

1.52 m (kg)Ground lbs

Line (kg)

-1.52 m (kg)

3.05 m (kg)

34,400* 34,400*15 604* 15 604*

6,870* 6,870*3 116* 3 116*

38,940* 38,940*17 663* 17 663*

22,070* 22,070*10 011* 10 011*56,880* 46,38025 800* 21 038*52,420* 42,65023 777* 19 34617,690* 17,690*8 024* 8 024*

13,390* 13,390*6 074* 6 074*

23,300* 23,300*10 569* 10 569*

35,400* 31,60016 057* 14 33435,520* 32,38016 112* 14 68733,430* 32,72015 164* 14 84229,560* 29,560*13 408* 13 408*27,270* 27,270*12 369* 12 369*29,960* 29,960*13 590* 13 590*42,130 29,43019 110 13 34940,300 27,80018 280 12 61038,970 26,62017 676 12 07538,290 26,02017 368 11 80234,030* 25,87015 436* 11 734

25,300* 21,76011 476 9 87030,870 22,33014 002 10 12930,570* 22,80013 866 10 34231,070* 22,77014 093 10 32830,920 22,37014 025 10 14730,160 21,68013 680 9 83429,210 20,81013 249 9 43928,280 19,96012 828 9 05427,540 19,28012 492 8 74527,100 18,88012 292 8 56426,790* 18,78012 152* 8 518

22,460 16,21010 188 7 35322,690 16,42010 292 7 44822,860 16,59010 369 7 52522,700 16,44010 297 7 45722,320 16,08010 124 7 29421,820 15,6209 897 7 085

21,310 15,1409 666 6 867

20,900 14,7509 480 6 690

20,650 14,5309 367 6 591

20,570 14,4509 330 6 554

17,320 12,4107 856 5 629

17,340 12,4307 865 5 638

17,220 12,3207 811 5 588

16,990 12,1007 707 5 488

16,740 11,8607 593 5 380

16,540 11,6707 502 5 293

16,460 11,6007 466 5 262

13,730 9,7006 228 4 400

13,630 9,6006 182 4 354

13,550 9,5306 146 4 323

13,540 9,5206 142 4 318

1. Lifting capacities shown should not be exceeded. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities for Log Loader attachment include a heel rack, but not grapple. Addition of grapple weight must be deducted from lift capacities.

2. Lifting capacities are based on machine standing

make allowances for job conditions such as soft or uneven ground.

3. Lifting capacities shown do not exceed 75% of mini-mum tipping loads or 87% of hydraulic capacities. Capacities marked with an asterisk (*) are limited by hydraulic capacities.

4. Least stable position is over the side.5. Operator should be fully acquainted with the Opera-

tor’s Manual & Operating Safety Booklet, furnished by LBX before operating the machine.

6. Capacities apply only to the machine as originally manufactured and normally equipped by LBX Company LLC.

Notes: Lifting capacities

Working Ranges

Travel Dimensions36′ 3″ (11.05 m)

11′ 2

″ (3.

40 m

)

11′ 11″ (3.62 m)

9″ ri

ser -

12′

5″ (

3.80

m)

15″ r

iser

- 12

′ 11″

(3.9

0 m

)

6′ 0″(1.82 m)

2′ 4″(700 mm)

4′ 2

″(1

.26

m)

4′ 9

″(1

.46

m)

5′ 11″(1.80 m)

2′ 4″(723 mm)

9′ 8″ (2.94 m)11′ 11″ (3.64 m)

24′ 10″ (7.56 m) 11′ 5″ (3.49 m)

13′ 9″ (4.18 m)

16′ 11″ (5.17 m)

50

-5

-10

-15

-20

-25 ft.

5

10

15

20

25

30

35

40 ft.

10152025303540 2000000000

Machine with boom in

High lift Standard

position position

A.

B.

C

D

E

F

G

H

High Lift Standard

50

-5

-10

-15

-20

-25 ft.

5

10

15

20

25

30

35

40

45 ft.

10152025303540 20000

Lift Point

Lifting Capacities

10´ ´

10´ ´

Radius of LoadCap at Max Reach

End Side End Side End Side End Side End Side End Side

Radius of LoadCap at Max Reach

End Side End Side End Side End Side End Side End Side

10.66 m (kg)

9.14 m (kg)

7.62 m (kg)

6.10 m (kg)

4.57 m (kg)

3.05 m (kg)


Line (kg)

-1.52 m (kg)

3.05 m (kg)

4.57 m (kg)

9.14 m (kg)

7.62 m (kg)

6.10 m (kg)

4.57 m (kg)

3.05 m (kg)


Line (kg)

-1.52 m (kg)

3.05 m (kg)

4.57 m (kg)

6.10 m (kg)

55,500* 55,500*25 174* 25 174*23,150* 23,150*10 501* 10 501*23,900* 23,900*10 841* 10 841*32,350* 32,350*14 674* 14 674*42,050* 42,050*19 074* 19 074*30,700* 30,700*13 925* 13 925*

46,350* 46,350*21 024* 21 024*23,150* 23,150*10 501* 10 501*23,900* 23,900*10 841* 10 841*32,350* 32,350*14 674* 14 674*42,050* 42,050*19 074* 19 074*47,400* 47,400*21 500* 21 500*33,950* 33,950*15 399* 15 399*

32,400* 32,400*14 696* 14 696*37,900* 37,900*17 191* 17 191*39,850* 39,850*18 076* 18 076*39,800* 39,800*18 053* 18 053*37,900* 37,900*17 191* 17 191*33,400* 33,400*15 150* 15 150*24,550* 24,550*11 136* 11 136*

22,800* 22,800*10 342* 10 342*26,700* 26,60012 111* 12 06628,700* 25,90013 018* 11 74828,850* 25,40013 086* 11 52127,850* 25,45012 633* 11 54424,750* 24,750*11 226* 11 226*16,950* 16,950*7 688* 7 688*

14,800* 14,800*6 713* 6 713*

16,300* 16,300*7 394* 7 394*

18,200* 18,200*8 255* 8 255*

20,400* 19,1509 253* 8 686

21,850* 18,5009 911* 8 391

22,150* 18,10010 047* 8 21021,350* 18,0509 684* 8 187

18,100* 18,100*8 210* 8 210*

12,500* 12,500*5 670* 5 670*

15,000* 15,000*6 804* 6 804*

15,950* 14,7507 235* 6 690

16,950* 14,3007 688* 6 486

17,650* 13,9508 006* 6 328

17,650* 13,7508 006* 6 237

15,650* 13,8007 099* 6 260

7,750* 7,750*3 515* 3 515*7,350* 7,350*3 334* 3 334*7,300* 7,300*3 311* 3 311*7,450* 7,450*3 379* 3 379*7,850* 7,850*3 561* 3 561*8,550* 8,550*3 878* 3 878*9,600* 9,600*4 354* 4 354*11,250* 11,250*5 103* 5 103*

8,600* 8,600*3 901* 3 901*7,750* 7,750*3 515* 3 515*7,350* 7,350*3 334* 3 334*7,300* 7,300*3 311* 3 311*7,450* 7,450*3 379* 3 379*7,850* 7,850*3 561* 3 561*8,550* 8,550*3 878* 3 878*9,600* 9,600*4 354* 4 354*

10,850* 10,850*4 921* 4 921*

29,650* 29,650*13 449* 13 449*37,700* 37,700*17 100* 17 100*40,650* 40,650*18 439* 18 439*40,300* 40,300*18 280* 18 280*37,900* 37,900*17 191* 17 191*32,750* 32,750*14 855* 14 855*24,400* 24,400*11 068* 11 068*

20,350* 20,350*9 231* 9 231*

23,500* 23,500*10 659* 10 659*26,800* 26,800*12 156* 12 156*29,050* 26,95013 177* 12 22429,250* 25,85013 268* 11 72528,050* 25,35012 723* 11 49924,800* 24,800*11 249* 11 249*18,600* 18,600*8 437* 8 437*

12,500* 12,500*5 670* 5 670*

17,000* 15,1507 711* 6 872

17,750* 14,7508 051* 6 690

18,050* 14,3008 187* 6 486

17,800* 13,9008 074* 6 305

16,450* 13,7007 462* 6 214

12,650* 12,650*5 738* 5 738*

12,200* 12,200*5 534* 5 534*

17,700* 17,700*8 029* 8 029*

19,800* 19,800*8 981* 8 981*

21,100* 19,9509 571* 9 049

22,300* 19,10010 115* 8 66422,450* 18,45010 183* 8 36921,500* 18,1009 752* 8 210

18,700* 18,0008 482* 8 165

12,600* 12,600*5 715* 5 715*








7. Lift capacity ratings for RoadBuilder attachment are based on SAE J1097. Lift capacity ratings for Log Loader attachment are based on SAE J2417.


Working Ranges

Machine equipped with

Butt-N-Top attachment

A.

B.

C

D

11′ 11″3.64 m

39′ 4″12.0 m

9′ 8″2.94 m

12′ 3″3.7 m 11′ 5″

3.5 m

4′ 0″1.2 m

6′ 0″1.8 m 4′ 9″

1.46 m

2″40 mm

13′ 9″4.2 m

11′ 5″3.49 m

16′ 11″5.17 m

50′ 9″15.5 m

2′ 4″700 mm

11′ 4″3.4 m

5′ 11″1.80 m

11′ 11″3.62 m

6′ 0″1.82 m

4′ 2

″1.

26 m

2′ 4″723 mm

0

-5

-10

5

10

15

20

25

30

35

50 ft.

-15 ft.

40

45

510152025303540

Lift Point

35353535 15151515

Butt-N-Top Capacities

16´ ´Radius of Load

End Side End Side End Side End Side End Side

12.19 m (kg)

10.66 m (kg)

9.14 m (kg)

7.62 m (kg)

6.10 m (kg)

4.57 m (kg)

3.05 m (kg)


Line (kg)

-1.52 m (kg)

3.05 m (kg)

Rear-Entry Forestry Cab

26′ 7″8.10 m

11′ 5″3.50 m

16′ 10″5.10 m

12′ 3″3.70 m

37,907* 37,907*17 194* 17 194*

19,081* 19,081*8 655* 8 655*

23,479* 23,479*10 650* 10 650*

31,996* 31,996*14 513* 14 513*34,486* 34,02515 643* 15 433

35,332* 33,91516 026* 15 38437,879* 33,01017 182* 14 97342,516* 31,60619 285* 14 33642,631 29,93519 337 13 57840,901 28,40218 552 12 88339,695 27,33318 005 12 39839,094 26,80117 733 12 15733,826* 26,73215 343* 12 125

30,227* 23,53013 711* 10 67332,208* 23,87514 609* 10 83032,352 23,73314 675 10 76531,812 23,23914 430 10 54130,983 22,48114 054 10 19730,010 21,59013 612 9 79329,084 20,74313 192 9 40928,375 20,09512 871 9 11527,972 19,72612 688 8 94827,113* 19,65812 298* 8 917

23,888 17,58110 835 7 97523,970 17,65710 873 8 00923,726 17,43010 762 7 90623,288 17,02110 563 7 72122,757 16,52710 322 7 49722,239 16,04410 087 7 27721,832 15,6659 903 7 106

21,606 15,4549 800 7 010

18,412 13,4728 352 6 111

18,474 13,5318 380 6 138

18,299 13,3668 300 6 063

18,035 13,1178 181 5 950

17,769 12,8668 060 5 836

17,572 12,6807 971 5 752

17,515 12,6277 945 5 728









Standard Equipment Options

LBX Company is the proud maker of quality Link-Belt excavators and is located in Lexington, KY. www.lbxco.comLitho in USA 9/10 #LBX2174® LBX and ® Link-Belt are registered trademarks. Copyright 2010. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.

SAE Width Bucket Number Arm Length

Type (yd3) (m3) (in) (mm) (lbs) (kg) Teeth 3.25 mHDP 1.22 0.93 30 762 2886 1309 4 H

1.54 1.18 36 914 3131 1420 4 H1.86 1.42 42 1067 3459 1569 5 H2.19 1.67 48 1219 3704 1680 5 H2.53 1.93 54 1372 4031 1828 6 H

XDP 1.12 0.86 30 762 3327 1509 4 H1.42 1.09 36 914 3620 1642 4 H1.73 1.32 42 1067 3994 1812 5 H2.04 1.56 48 1219 4287 1945 5 H

DITCH 2.20 1.68 72 1829 2971 1348 NA H

Approval Code For Arm/Bucket Combinations

HDP - Heavy duty plateXDP - Extreme duty plate

Bucket Sizes for Road Builder Attachment

for use in log-loading, road building and harvester ......hydraulic system open-center system, (2)...

Documents