for the latest prices, please check automationdirect.com ... · festo numatics rotomation 5.1 3.2...

The NITRA CPS Series of cylinder position switches offers a robust, yet cost-effective, interface between pneumatic or hydraulic actuators and electrical control systems. Using state-of-the-art magnetic sensing technology, these switches are designed for use with cylinders that have a magnet incor-porated in the cylinder piston. They can be used to provide cylinder position indication, cycle count, or to confirm opera-tion.

NITRA cylinder position switches are now available in nine styles with accessories to fit many different styles of cylinders or actuators. The switches are designed for general purpose applications on most popular cylinder brands with sensor grooves, on round body cylinders using CPSB Series mounting bands or on tie rod cylinders using CPSA Series adapters. Harsh duty applications can use the CPSF Series switches with CPSS stainless steel mounting bands if needed.

NITRA cylinder position switches are available in 3-wire DC, PNP normally open, PNP normally closed, and NPN normally open electronic solid state configurations. Switches include integral cable with either an M8 or M12 wiring connector or wire leads. Integral LED indication provides switch status for speedy switch positioning and troubleshooting. Pre-tested for use with NITRA pneumatic cylinders, these switches are also suitable for use with other brands of cylinders with magnetic pistons.

Features• Electronic switch output, PNP (normally open or

normally closed) or NPN (normally open)• Solid state reliability, no moving parts for longer life• AMR sensing technology with small hysteresis for

precise sensing• GMR sensing technology for basic industrial applications• Compact and easy to mount on round body, tie rod,

and extruded body cylinders• LED switch status indication• Integral cable with M8 or M12 wiring connector or 2-meter

wire leads• Electronic switch performance at reed switch prices

CPS Series Cylinder Position Switches

Reed Switch vs. AutomationDirect CPS Series Electronic Switch

Mechanical Reed Switch AutomationDirect CPS Series Electronic Switch Details

Durability low (1-2 million cycles typical) high (virtually unlimited number of cycles) Reed switchs can stick, break, bounce and are prone to wear

Repeatability low high Mechanical wear of reed switches can lead to switch point drift

Response time low high Reed switches have a slower response time than electronic switches, resulting in lower switch accuracy

Sensitivity to magnetic fields low high Electronic sensors, more sensitive than reed switches, operate reliably

even with weak magnetic fields

Temperature stability high high Both switch technologies are extremely stable over the entire temperature range

Longevity low high Electronic sensors are insensitive to long term effects of magnetic fields. Reed switches can become permanently magnetized over time.

Response sensitivity medium high Electronic sensors have small hysteresis and are exceptional for short stroke cylinders

Price low lowReed switches are usually much less expensive than electronic

switches. The AutomationDirect CPS Series offers all the advantages of an electronic cylinder position switch at reed switch prices.

Technology Comparison

AMR vs. GMR TechnologyTwo solid state magnetic sensing technologies used for pneu-matic cylinder position are GMR (Giant Magnetoresistive) and AMR (Anisotropic Magnetoresistive). Both sensing technologies consist of layers of ferromagnetic material that change in elec-trical resistance when exposed to an external magnetic field.

AMR based switches have a higher sensitivity and narrower sensing field compared to less expensive GMR based switches. AMR switches are a better choice for cylinders with short strokes.

CPSB Band AssemblyCPSA Adapter Assembly E-series cylinder with switch

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-309

For the latest prices, please check AutomationDirect.com.


Position Switch Cross Reference Chart

NITRA Switch Type

Cylinder Brand (may fit some of these cylinders)

Photo Example Groove Illustration

CPSCPSF

NITRA A-Series, D-Series, F-Series

Adapter & Band(CPSB or CPSS Series)

Switch

RoundCylinder

Tie Rod Adapter (CPSA Series)

Switch

CPS9C

DE-STA-CORobohand

SMCCompact Air R 2.13 +/- 0.05

2.53 Min. +/- 0.1

3.05 +/- 0.1

CPS9DFabco

NumaticsRotomation

1.52 4.82

6.35

CPS9F

NITRA G-SeriesFabcoFesto

NumaticsRotomation

5.1

3.24.4

6.5

CPS9H NITRA E-SeriesNITRA H-Series

3.05

R 0.2

4.2

4.25.0

CPS9M Norgren

5.5 +/-0.1

R 3.255.1 +/-0.1

CPS9Q NITRA G-SeriesParker

5.1

3.24.4

6.5

CPS9T SMC

5.5

7.2

3.9

1.06

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-310


CPS-AN-A

CPS-xx-A CPS-xx-F


NITRA CPS Series Cylinder Position Switches

Part No. Description Price Weight (lbs)

CPS-AP-FMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally open, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 0.3 meter (1 ft) cable with M8 snap-fit connector. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$21.00 0.1

CPS-CP-FMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally closed, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 0.3 meter (1 ft) cable with M8 snap-fit connector. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$21.00 0.1

CPS-AN-FMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally open, 3-wire, 10-30 VDC, electronic NPN transistor output, status LED, 0.3 meter (1 ft) cable with M8 snap-fit connector. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$21.00 0.1

CPS-AP-AMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally open, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 2 meter (6.56 ft) cable with wire leads. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$20.00 0.1

CPS-CP-AMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally closed, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 2 meter (6.56 ft) cable with wire leads. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$20.00 0.1

CPS-AN-AMagnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, normally open, 3-wire, 10-30 VDC, electronic NPN transistor output, status LED, 2 meter (6.56 ft) cable with wire leads. Can be mounted on cylinders with T-slots or round body cylinders using a CPSB series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$20.00 0.1

NITRA CPS Series Cylinder Switch SpecificationsOperating Voltage 10-30 VDC

Voltage Drop < 2.5 V

Current Rating 100 mA (built-in overload protection)

Wire Size 26AWG (0.13mm²)

Short Circuit Protection Yes

Reverse Polarity Protection Yes

Overload Protection Yes

Leakage Current none

Sensing Technology AMR

Hysteresis < 1 mm

Function Display Switching status yellow

Switching Frequency > 6,000 Hz for 3-wire

Magnetic Sensitivity 2 millitesla (20 gauss)

Housing Materials polyamide and stainless steel

Operating Temperature -13°F to 185°F (-25°C to 85°C)

Protection Rating IP 67

Agency Approvals CE, cULus (Class 2 source required), file E328811

Wiring

1 DC+

LOADDC–

4

3

1

4

3

CPS-AP-F

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+

LOADDC–

BLK

BLU

CPS-CP-A

BRN DC+LOAD

DC–

BLK

BLU

CPS-AP-A

1 DC+LOAD

DC–

4

31

4

3

CPS-AN-F

1 DC+

LOADDC–

4

3

1

4

3

CPS-CP-F

Dimensionsmm [inches]

CPS-AP-F CPS-AP-A

Switches include switch stop and wire retainer for T-slot mounting

NITRA CPS Series cylinder position switches use AMR sensing technology for use with cylinders having a magnetic piston. The switches are deisigned to mount on cylin-ders with a 5mm square T-slot channel. Using CPSA adapters or CPSB mounting bands, they can be used with tie rod or round body style cylinders. 3-year warranty.

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-311


http://www.automationdirect.com/pn/CPS-AN-A

http://www.automationdirect.com/pn/CPS-AP-F

http://www.automationdirect.com/pn/CPS-CP-F

http://www.automationdirect.com/pn/CPS-AN-F

http://www.automationdirect.com/pn/CPS-AP-A

http://www.automationdirect.com/pn/CPS-CP-A

http://www.automationdirect.com/pn/CPS-AN-A


http://www.automationdirect.com/pn/CPS-CP-A


http://www.automationdirect.com/pn/CPS-AN-F

http://www.automationdirect.com/pn/CPS-CP-F



CPSF Series Cylinder Position Switches

CPSF-AP-H

NITRA CPSF Series Cylinder Position Switches


CPSF-AP-H

Magnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, IP69K, normally open, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 0.3 meter (1 ft) cable with M12 con-nector. Can be mounted on cylinders with T-slots or round body cylinders using a CPSS series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$25.00 0.1

CPSF-AP-A

Magnetic cylinder switch for position sensing of pneumatic or hydraulic cylinders, IP69K, normally open, 3-wire, 10-30 VDC, electronic PNP transistor output, status LED, 2 meter (6.56 ft) cable with wire leads. Can be mounted on cylinders with T-slots or round body cylinders using a CPSS series mounting band or on tie rod cylinders using a CPSA series rod adapter.

$23.00 0.1

NITRA CPSF Cylinder Switch SpecificationsOperating Voltage 10-30 VDC

Voltage Drop < 2.5 V

Current Rating 100 mA (built-in overload protection)


Short Circuit Protection Yes


Overload Protection Yes

Leakage Current none

Sensing Technology AMR

Hysteresis < 1 mm

Function Display Switching status yellow

Switching Frequency > 6,000 Hz for 3-wire


Housing Materials polyamide and stainless steel


Protection Rating IP 69K

Agency Approvals CE, cULus (Class 2 source required), file E328811

Wiring

1 DC+

LOADDC–

4

3

BRN DC+

LOADDC–

BLK

BLU


CPSF-AP-A

CPSF-AP-A

CPSF-AP-H

CPSF-AP-A

NITRA CPSF Series cylinder position switches are designed for food and beverage or washdown applications. The switches are designed to mount on cylinders with a 5mm square T-slot channel. Using CPSA adapters or CPSS all stainless steel mounting bands, they can be used with tie rod or round body style cylinders. 3-year warranty.

CPSF-AP-H

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-312


http://www.automationdirect.com/pn/CPSF-AP-H


http://www.automationdirect.com/pn/CPSF-AP-A






CPSA Series Cylinder Position Switches – Mounting Adapter

NITRA Cylinder Switch Mounting AdaptersPart No. Description Price Weight (lbs)

CPSA-03 Adapter bracket to secure a T-slot cylinder position switch to a 1/8 to 3/16 inch (3 to 5 mm) diameter tie rod $5.75 0.1

CPSA-04 Adapter bracket to secure a T-slot cylinder position switch to a 3/16 to 1/4 inch (5 to 7mm) diameter tie rod $5.75 0.1




NITRA CPSA Series mounting adapters are made of extruded aluminum. They are used to mount CPS or CPSF series T-slot switches to tie rod style cylinders. They come in five sizes to fit tie rods from 1/8 inch [3mm] to 3/4 inch [20mm] diameter.


CPSA-XX

Assembly photo shows CPSA mounting adapter with T-slot cylinder position switch.

Cylinder Switch Mounting Adapter Selector*Nitra Cylinder Bore Size CPSA-04 CPSA-07 CPSA-09

1-1/2” 4 4

2” 4

2-1/2” 4

3-1/4” 4 4

4” 4 4

* CPSA-03 and CPSA-12 mounting adapters are for cylinder sizes that are not currently available.

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-313


http://www.automationdirect.com/pn/CPSA-03










NITRA Cylinder Switch SS Mounting Bands with Plastic CapsPart No. Description Price Weight (lbs)

CPSB-07 Mounting band to secure a T-slot cylinder position switch to a 5/16 to 1/2 inch (8, 10, 12 mm) bore round body cylinder. $2.50 0.1

CPSB-14 Mounting band to secure a T-slot cylinder position switch to a 9/16 to 7/8 inch (16 & 20 mm) bore round body cylinder. $2.75 0.1

CPSB-20 Mounting band to secure a T-slot cylinder position switch to a 1-1/16 to 1-1/4 inch (25 & 32 mm) bore round body cylinder. $3.00 0.1

CPSB-24 Mounting band to secure a T-slot cylinder position switch to a 1-1/2 inch (40 mm) bore round body cylinder. $3.25 0.1

CPSB-32 Mounting band to secure a T-slot cylinder position switch to a 1-3/4 to 2 inch (50 mm) bore round body cylinder. $3.50 0.1

CPSB-40 Mounting band to secure a T-slot cylinder position switch to a 2-1/2 inch (63 mm) bore round body cylinder $3.75 0.1

CPSB-52 Mounting band to secure a T-slot cylinder position switch to a 3 inch (80 mm) bore round body cylinder $4.00 0.1

CPSB-64 Mounting band to secure a T-slot cylinder position switch to a 4 inch (100 mm) bore round body cylinder $4.25 0.1

CPSB and CPSS Series Cylinder Position Switches - Mounting Bands

CPSB-20

CPSS-52

NITRA Cylinder Switch All Stainless Steel Mounting BandsPart No. Description Price Weight (lbs)

CPSS-07Stainless steel mounting band to secure a T-slot cylinder position switch to a 7/16 to 9/16 inch (10 to 16 mm) bore round body cylinder

$5.25 0.1

CPSS-14Stainless steel mounting band to secure a T-slot cylinder position switch to a 7/8 to 1-1/16 inch (20 to 25 mm) bore round body cylinder

$5.50 0.1

CPSS-20 Stainless steel mounting band to secure a T-slot cylinder position switch to a 1-1/4 inch (32 mm) bore round body cylinder $5.75 0.1


CPSS-32 Stainless steel mounting band to secure a T-slot cylinder position switch to a 1-3/4 to 2 inch (50 mm) bore round body cylinder $6.50 0.1


CPSS-52 Stainless steel mounting band to secure a T-slot cylinder position switch to a 3 inch (80 mm) bore round body cylinder $7.00 0.1

CPSS-64 Stainless steel mounting band to secure a T-slot cylinder position switch to a 4 inch (100 mm) bore round body cylinder $7.25 0.1


CPSX-XX

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-314


http://www.automationdirect.com/pn/CPSB-07









http://www.automationdirect.com/pn/CPSS-52









CPS9C Series Cylinder Position Switches

Wiring

CPS9C-AP-FCPS9C-AP-A

NITRA CPS9C Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 4mm round slots. Position is fixed by using the supplied screw that is embedded in the switch body.

NITRA CPS9C Series Cylinder Position SwitchesPart No. Description Price Weight

(lbs)

CPS9C-AP-APneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 4mm round slots.

$15.00 0.2

CPS9C-AN-APneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 4mm round slots.

$15.00 0.2

CPS9C-AP-FPneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 4mm round slots.

$15.00 0.2

CPS9C-AN-FPneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 4mm round slots.

$15.00 0.2

NITRA CPS9C Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC

Voltage Drop 2.5 V @ 40 mA

Current Rating 0.5 Amps Max.


Cable Diameter 2.7 mm

Switching Power 14 watts Max.

Short Circuit Protection No


Overload Protection No

Leakage Current < 0.01 mA

Sensing Technology GMR

Off Delay Time 150-200 ms

Function Display PNP switching status yellow / NPN switching status red

Switching Frequency < 1000 Hz

Magnetic Sensitivity 4.0 millitesla (40 gauss)

Housing Materials Cable = PVC (Polyvinyl Chloride) / Sensor = PBT (Polybutylene Terephthalate), TPU (Thermoplastic Polyurethane)


Protection Rating NEMA 6 / IP 67

Agency Approvals CE, RoHS, REACH

CPS9C-AP-A

CPS9C-AN-A

CPS9C-AP-F

CPS9C-AN-F

25.51.00

3M[9.8FT]

CPS9C-XX-A

4.50.18

2.80.11

4.00.16

END DETAILSCALE 4:1

25.51.00

152.46.00

35.01.38

M8X1.0

CPS9C-XX-F

1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3

wire length tolerance +12” / - 0”

cable length tolerance w 1.5”


Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-315


http://www.automationdirect.com/pn/CPS9C-AP-A

http://www.automationdirect.com/pn/CPS9C-AP-F


http://www.automationdirect.com/pn/CPS9C-AN-A


http://www.automationdirect.com/pn/CPS9C-AN-F


http://www.automationdirect.com/pn/CPS9C-AN-A


http://www.automationdirect.com/pn/CPS9C-AN-F

CPS9D Series Cylinder Position Switches

Wiring

CPS9D-AP-FCPS9D-AP-A

NITRA CPS9D Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 1/4 inch 60 degree dovetail slots. The switches can be used with the CPS9D series dovetail adapters for mounting.

NITRA CPS9D Series Cylinder Position SwitchesPart No. Description Price Weight

(lbs)

CPS9D-AP-APneumatic cylinder switch, for position sensing, magnetic, dovetail, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 1/4 inch 60 degree dovetail slots or other dovetail grooves using CPS9D-D adapters.

$12.00 0.2

CPS9D-AN-APneumatic cylinder switch, for position sensing, magnetic, dovetail, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 1/4 inch 60 degree dovetail slots or other dovetail grooves using CPS9D-D adapters.

$12.00 0.2

CPS9D-AP-FPneumatic cylinder switch, for position sensing, magnetic, dovetail, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connec-tor. Can be mounted on cylinders with 1/4 inch 60 degree dovetail slots or other dovetail grooves using CPS9D-D adapters.

$12.00 0.2

CPS9D-AN-FPneumatic cylinder switch, for position sensing, magnetic, dovetail, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connec-tor. Can be mounted on cylinders with 1/4 inch 60 degree dovetail slots or other dovetail grooves using CPS9D-D adapters.

$12.00 0.2

NITRA CPS9D Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC

Voltage Drop 1.0 V



Switching Power 4.8 watts Max.

Switching Speed 4µs operate / 4µs release










Housing Materials Zytel




CPS9D-AP-A

CPS9D-AN-A

CPS9D-AP-F

CPS9D-AN-F

CPS9D-xx-A CPS9D-xx-F

1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3

wire length tolerance +12” / - 0” cable length tolerance w 1.5”


Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-316


http://www.automationdirect.com/pn/CPS9D-AP-A

http://www.automationdirect.com/pn/CPS9D-AP-F


http://www.automationdirect.com/pn/CPS9D-AN-A


http://www.automationdirect.com/pn/CPS9D-AN-F


http://www.automationdirect.com/pn/CPS9D-AN-A


http://www.automationdirect.com/pn/CPS9D-AN-F

CPS9D Series Cylinder Position Switch – Accessories

NITRA CPS9D Series Cylinder Position Switch Accessories


CPS9D-D12M Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 12mm 60 degree dovetail slot $1.75 0.2

CPS9D-D14M Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 14mm 60 degree dovetail slot $1.50 0.2

CPS9D-D38 Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 3/8 inch 60 degree dovetail slot $1.50 0.2

Accessories


CPS9D-D12M CPS9D-D38CPS9D-D14M

CPS9D-D12M CPS9D-D14M CPS9D-D38Photo example shows a CPS9D switch mounted in a dovetail groove adapter.

Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-317


http://www.automationdirect.com/pn/CPS9D-D12M






http://www.automationdirect.com/pn/CPS9D-D38



CPS9F Series Cylinder Position Switches

Wiring

CPS9F-AP-FCPS9F-AP-A

NITRA CPS9F Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 6.5 x 3.2 mm T-slots.

NITRA CPS9F Series Cylinder Position Switches


CPS9F-AP-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$12.00 0.2

CPS9F-AN-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$12.00 0.2

CPS9F-AP-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$12.00 0.2

CPS9F-AN-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$12.00 0.2

CPS9F-AP-A

CPS9F-AN-A

CPS9F-AP-F

CPS9F-AN-F

CPS9F-xx-A CPS9F-xx-F

NITRA CPS9F Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC

Voltage Drop 1.0 V














Housing Materials Zytel




1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3



Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-318


http://www.automationdirect.com/pn/CPS9F-AP-A

http://www.automationdirect.com/pn/CPS9F-AP-F


http://www.automationdirect.com/pn/CPS9F-AN-A


http://www.automationdirect.com/pn/CPS9F-AN-F


http://www.automationdirect.com/pn/CPS9F-AN-A


http://www.automationdirect.com/pn/CPS9F-AN-F

CPS9H Series Cylinder Position Switches

WiringCPS9H-AP-FCPS9H-AP-A

NITRA CPS9H Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 4mm square T-slots.

NITRA CPS9H Series Cylinder Position Switches


CPS9H-AP-APneumatic cylinder switch, for position sensing, magnetic, square, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 4mm square T-slots.

$21.00 0.2

CPS9H-AN-APneumatic cylinder switch, for position sensing, magnetic, square, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 4mm square T-slots.

$21.00 0.2

CPS9H-AP-FPneumatic cylinder switch, for position sensing, magnetic, square, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit con-nector. Can be mounted on cylinders with 4mm square T-slots.

$21.00 0.2

CPS9H-AN-FPneumatic cylinder switch, for position sensing, magnetic, square, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit con-nector. Can be mounted on cylinders with 4mm square T-slots.

$21.00 0.2

CPS9H-AP-A

CPS9H-AN-A

CPS9H-AP-F

CPS9H-AN-F

CPS9H-xx-A CPS9H-xx-F

NITRA CPS9H Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC











Function Display PNP switching status green / NPN switching status red



Housing Materials ABS




1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3



Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-319


http://www.automationdirect.com/pn/CPS9H-AP-A

http://www.automationdirect.com/pn/CPS9H-AP-F


http://www.automationdirect.com/pn/CPS9H-AN-A


http://www.automationdirect.com/pn/CPS9H-AN-F


http://www.automationdirect.com/pn/CPS9H-AN-A


http://www.automationdirect.com/pn/CPS9H-AN-F

CPS9M Series Cylinder Position Switches

WiringCPS9M-AP-FCPS9M-AP-A

NITRA CPS9M Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 1/4 inch round slots.

NITRA CPS9M Series Cylinder Position Switches


CPS9M-AP-APneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 1/4 inch round slots.

$15.00 0.2

CPS9M-AN-APneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 1/4 inch round slots.

$15.00 0.2

CPS9M-AP-FPneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit con-nector. Can be mounted on cylinders with 1/4 inch round slots.

$15.00 0.2

CPS9M-AN-FPneumatic cylinder switch, for position sensing, magnetic, round, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit con-nector. Can be mounted on cylinders with 1/4 inch round slots.

$15.00 0.2

CPS9M-AP-A

CPS9M-AN-A

CPS9M-AP-F

CPS9M-AN-F

CPS9M-xx-A CPS9M-xx-F

NITRA CPS9M Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC


















1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3



Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-320


http://www.automationdirect.com/pn/CPS9M-AP-A

http://www.automationdirect.com/pn/CPS9M-AP-F


http://www.automationdirect.com/pn/CPS9M-AN-A


http://www.automationdirect.com/pn/CPS9M-AN-F


http://www.automationdirect.com/pn/CPS9M-AN-A


http://www.automationdirect.com/pn/CPS9M-AN-F

CPS9Q Series Cylinder Position Switches

WiringCPS9Q-AP-FCPS9Q-AP-A

NITRA CPS9Q Series cylinder posi-tion switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with a 6.5 x 3.2 mm T-slot channel.

NITRA CPS9Q Series Cylinder Position Switches


CPS9Q-AP-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Low profile housing that can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$17.00 0.2

CPS9Q-AN-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Low profile housing that can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$17.00 0.2

CPS9Q-AP-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Low profile housing that can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$17.00 0.2

CPS9Q-AN-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Low profile housing that can be mounted on cylinders with 6.5 x 3.2 mm T-slots.

$17.00 0.2

CPS9Q-AP-A

CPS9Q-AN-A

CPS9Q-AP-F

CPS9Q-AN-F

CPS9Q-xx-A CPS9Q-xx-F

NITRA CPS9Q Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC

Voltage Drop 1.0 V














Housing Materials Ultem




1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3



Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-321


http://www.automationdirect.com/pn/CPS9Q-AP-A

http://www.automationdirect.com/pn/CPS9Q-AP-F


http://www.automationdirect.com/pn/CPS9Q-AN-A


http://www.automationdirect.com/pn/CPS9Q-AN-F


http://www.automationdirect.com/pn/CPS9Q-AN-A


http://www.automationdirect.com/pn/CPS9Q-AN-F

CPS9T Series Cylinder Position Switches

Wiring

CPS9T-AP-FCPS9T-AP-A

NITRA CPS9T Series cylinder position switches are general purpose switches for use with cylinders having a magnetic piston. The switches are designed to mount on cylinders with 7.2 x 3.9 mm T-slots.

NITRA CPS9T Series Cylinder Position Switches


CPS9T-AP-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 7.2 x 3.9 mm T-slots.

$21.50 0.2

CPS9T-AN-APneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 9.8 ft. (3.0m) cable with wire leads. Can be mounted on cylinders with 7.2 x 3.9 mm T-slots.

$21.50 0.2

CPS9T-AP-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic PNP transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 7.2 x 3.9 mm T-slots.

$21.50 0.2

CPS9T-AN-FPneumatic cylinder switch, for position sensing, magnetic, rectangular, normally open, 3-wire, 5-28 VDC, electronic NPN transistor output, status LED, 0.5 ft. (0.15m) cable with M8 snap-fit connector. Can be mounted on cylinders with 7.2 x 3.9 mm T-slots.

$21.50 0.2

CPS9T-AP-A

CPS9T-AN-A

CPS9T-AP-F

CPS9T-AN-F

31.41.24

3000.0118.11

5.70.22

5.40.21

6.50.26

3.1

0.12

31.41.24

35.01.38

5.7

0.22 5.4

0.21

116.64.59

M8X1 6.5

0.26

3.10.12

CPS9T-xx-A CPS9T-xx-F

NITRA CPS9T Series Cylinder Switch SpecificationsOperating Voltage 5-28 VDC











Function Display PNP switching status green / NPN switching status red







1 DC+

LOADDC–

4

3

1

4

3

BRN DC+LOAD

DC–

BLK

BLU

BRN DC+LOAD

DC–

BLK

BLU

1 DC+LOAD

DC–

4

31

4

3



Pneumatics 1 - 8 0 0 - 6 3 3 - 0 4 0 5tPNE-322


http://www.automationdirect.com/pn/CPS9T-AP-A

http://www.automationdirect.com/pn/CPS9T-AP-F


http://www.automationdirect.com/pn/CPS9T-AN-A


http://www.automationdirect.com/pn/CPS9T-AN-F


http://www.automationdirect.com/pn/CPS9T-AN-A


http://www.automationdirect.com/pn/CPS9T-AN-F

for the latest prices, please check automationdirect.com ... · festo numatics rotomation 5.1 3.2...

Documents