for pathways / courtyards / entrances · external vertical grooves align with vertical members on...

Low Level Luminaires

BOLLARDSCB Compact BollardsVRB Round BollardsVSB Square BollardsGEM GEM™ BollardsBNB Bounce® BollardsLE Era Lantern BollardsB30 Traditional BollardsSL Site Lightforms

F o r P a t h w a y s / C o u r t y a r d s / E n t r a n c e s

Low Level Luminaires

SITE / AREAPARKING STRUCTURE

ROADWAYARCHITECTURAL FLOOD

ACCENTLANDSCAPE

MAILING ADDRESS:P.O. BOX 60080

CITY OF INDUSTRY, CA91716-0080

BUSINESS ADDRESS:16555 EAST GALE AVENUE

CITY OF INDUSTRY, CA 91745U.S.A.

PHONE 626 / 968 - 5666FAX 626 / 369 - 2695

ENTIRE CONTENTS© COPYRIGHT 2009 KIM LIGHTING, INC.

ALL RIGHTS RESERVEDREPRODUCTION IN WHOLE OR IN PART

WITHOUT PERMISSION IS STRICTLY PROHIBITED.U.S. PATENTS: D443,094, D313,482

D312,890, 4,231,080, D410,553, D473,333 S

www.kimlighting.com

Printed in U.S.A.5507009327

Version 2.2 (11/09)

Low Level LuminairesThis extensive line of Low Level Luminaires hasbeen designed to provide specifiers with a broadspectrum of lighting solutions for pedestrianareas. Each Luminaire provides unique featuresfor brightness control, vandal resistance, andarchitectural compatibility. In addition, each fixturehas an aesthetic relationship to various Kim polemounted luminaires, following the Kim Theory ofRelativity as a matrix for providing the properscale and visual logic to the overall outdoorlighting scheme.

Since Low Level Luminaires can be subject tovandalism in unsecured areas, most of thesefixtures have been engineered to provide superiorstrength through extra thick components, andbase-to-grade connections that withstandconsiderable force. Outstanding performance isprovided by reflector and/or lens designs thatdelivers broad illumination with low brightness. In combination, the performance, design, andruggedness of these Kim luminaires is unmatchedin the lighting industry.

Table of Contents

Relativity 2-3

CB Compact Bollards 4-7

VRB Vandal ResistantRound Bollards 8-15

VSB Vandal ResistantSquare Bollards 16-23

GEM™ Bollards 24-29

BNB Bounce® Bollards 30-35

LE Era® LanternBollards 36-39

B30 Bollards 40-43

SL Site Lightforms® 44-59

Photometrics 60-68

Lamp and Electrical Guide 69

KimNOW!

5-Day Shipping Quality On DemandSee Ordering Information Pages

KIM LIGHTING 1

Product Line Selection Criteria Configurations Page

CB Compact Bollards

• Compact size for smaller gardens and pathways.• Suitable for commercial or residential applications.• Full louvers provide low fixture brightness. No direct light above horizontal.• Not recommended for vandal-prone areas.

VSB Vandal ResistantSquare Bollards

VRB Vandal ResistantRound Bollards

• Rugged construction is suitable for public areas where vandalism may occur.• Round form complements curvilinear Kim site luminaires, or architectural

elements.• Full high-angle louvers provide low fixture brightness with broad light

distribution. No direct light above horizontal.• Vertical wall-wash feature on VRB2 and VRB4.• Concrete shaft models available with complementary unlighted

barrier model.

GEM™ PerformanceBollard

• Rugged construction for public areas with security.• Round form complements curvilinear Kim site luminaires, or architectural

elements.• Gem-like optical configuration provides broad light distribution with

attractive lens presence.• Grade-level Pathway Marker also available.• Specify compact fluorescent, HID, or LED sources.

B30 TraditionalBollard

• Traditional bollard for secure areas. Not recommended for vandal-prone areas.• Reflector/Louver optical system provides broad light distribution,and

higher brightness than louvered bollards. Higher illumination is providedfor objects taller than the bollard.

SL Site Lightforms

• Rugged construction for public areas. SL5 and SL6 utilize polycarbonatelenses for vandal-prone areas.

• Strong architectural forms complement a wide variety of architectural styles.• Full cutoff optics in SL1 - SL4. Very low brightness.• Specify compact fluorescent, HID, or LED sources.

• Rugged construction is suitable for public areas where vandalism may occur.• Square form complements rectilinear Kim site luminaires, or architectural

elements.• Full high-angle louvers provide low fixture brightness with broad light

distribution. No direct light above horizontal.• Vertical wall-wash feature on VSB2.• Concrete shaft models available with complementary unlighted

barrier model.

4-7

44-59

40-43

24-29

16-23

8-15

Alternate Flat Topavailable on lighted models.

BNB Bounce®

Bollard30-35

LE Era® Lantern Bollard

36-39

• Rugged construction is suitable for public areas where vandalism may occur.

• Transitional design allows for installation in traditional or contemporary settings.• Matches Kim Lighting’s Bounce and Mini-Bounce pedestrian and wall

mounted luminaires.• Specify compact fluorescent, pulse start metal halide, or LED sources.• Three unique shaft designs.

• Rugged construction is suitable for public areas where vandalism may occur.

• Traditional design matches Kim Lighting’s Era Lantern series of highperformance site, pedestrian, and wall mounted luminaires.

• Specify compact fluorescent, pulse start metal halide, or LED sources.• Three unique shaft designs.• Full-cutoff optics are dark-sky approved.

0303

View of Architectureunobstructedby poles

ACP 21"

ACA27"

BNS

PEDESTRIAN ZONEAs you leave the parking lot and transition to pedestrian areas, poles should decrease in height to 10' - 16'. In addition, luminaires should decrease in scale, and can have more decorative features to be appreciated at the pedestrian level.

SITE / ROADWAY ZONEParking lots and roadways require luminaires on 20' - 40' poles to efficiently light these large areas. Therefore, this lighting becomes dominant, and sets the design and style for all other lighting as you progress towards the building.

As Distance to Architecture Decreases, Luminaire Height and Scale Also Decreases

Luminaire design and style remain constant to unify the lighting scheme

2 KIM LIGHTING

Kim Theory of Relativity

The Relationship of Outdoor Lighting to Site and Architecture

KIM THEORY OF RELATIVITYThe purpose of this guideline is to bring a cohesive look to outdoorl ighting, maximizing l ighting eff iciency while preserving thearchitectural experience. Simply stated, the Kim Theory of Relativitysays “Poles belong in parking lots. And, once you leave the parkinglot, the outdoor lighting should become less and less conspicuous until it becomes an integral part of the architecture.” In addition, theluminaire style and geometry should remain consistent. If this guideline is utilized, the outdoor lighting will enhance the site andarchitecture, bringing unity to the outdoor lighting scheme.

LTV

WD

WF

SW

AFL

GEM

LANDSCAPE / PATH ZONENear the building, luminaires should begin to disappear, blending into the landscape and hardscape elements.

BUILDING / PERIMETER ZONENo pole mounted luminaires should ever be used near the building, as they will dominate the architecture. The only exception would be the use of decorative luminaires to delineate entrances to the structure. Building mounted, architecturally compatible fixtures should be almost invisible.

KIM LIGHTING 3

CB VRB VSB GEM™

BNB LE B30 SL

KIM LIGHTING 5

CB

Features Compact Bollards

OpticsThe success of the Compact Bollard’s performance is due to full overlapping louvers which provide total source cutoff above horizontal. A soft glow from the louvers provides sufficient vertical illumination for surrounding plants or pedestrians.

The glass globe is completely gasketed and utilizes prismatics to optimize and control the light. With recommended coated lamps,a smooth wash of light is achieved with no shadows from the vertical supports. Electrical ComponentsAll HPF ballasts and components are factory mounted and prewired to a single bracket for field installation within the riser.

Anchor BaseTo ensure fixture strength and stability in adverse conditions, the base is heavy cast aluminum and secures the riser with four flush stainless steel sockethead screws finished to match fixture.

Louver AssemblyIndividual louver components, top, and base are constructed of heavy die-cast aluminum, connected as one unit with four concealed stainless steel screws within the vertical supports.

For relamping, these screws are removed and the interlocking louvers lifted as one unit, providing access to the glass enclosure and lamp.

Louver base is die-cast aluminum and secures internally to the riser with four concealed stainless steel screws.

Extruded Aluminum Riser5" diameter .125" thick aluminum extrusion available in two lengths for overall fixture heights of 24" and 32". Vertical groove detail aligns with the vertical fixture supports and serves to strengthen and unify the design. Thick internal ribs at the mounting screw locations provide increased strength.

24"

or32"

overallheight

2K"

MIN

INSTALLATION IN PAVING OR HARDSCAPE INSTALLATION IN SOIL

INSTALLATIONBollards are installed with anchor bolts imbedded in a poured-in-place concrete footing (by others). Internal anchor base is leveled prior to placing the riser. When installing in soil or landscaping, the concrete footing should be raised at least 2K" to avoid corrosive contact between fixture and soil or standing water.

6"

6 KIM LIGHTING

CB

Compact Bollards Specifications

6 KIM LIGHTING

Dimensions

6" DIA.(152.4 mm)

6" DIA.(152.4 mm)

32"(812.8 mm)

26"(660.4 mm)

LIGHTCENTERHEIGHT

6"(152.4 mm)

CB Models50 to 70 wattMedium Base Lamps42 watt Compact Fluorescent

CB32Maximum weight: 20 lb

CB24Maximum weight: 17 lb

BASE PLANCB

2E" (73.0 mm) BOLT CIRCLE DIA.

1L" DIA.(44.5 mm)CONDUITOPENING

5" DIA.(127.0 mm)

5" DIA.(127.0 mm)

24"18"

LIGHTCENTERHEIGHT

6"

5" DIA.(127.0 mm)

2K" MIN.(63.5 mm)

(152.4 mm)

(609.6 mm)(457.2 mm)

2K" MIN.(63.5 mm)

Top and Louvers: Interlocking die-cast, low-copper (<0.6% Cu)aluminum sections fasten together with concealed stainless steel screws.Louver base assembly fastens internally to riser with 4 concealed screws.

Riser: Extruded aluminum, 5" diameter, .125" typical wall thickness,external vertical grooves align with vertical members on louver assembly.Attaches to anchor base with 4 countersunk stainless steel flat sockethead screws finished to match fixture.

Anchor Base: Heavy sand cast, low-copper (<0.6% Cu) aluminum, fullyconcealed within riser shaft. Three C" x 10"+ 2" zinc plated anchor bolts,each with two nuts and washers, and a rigid pressboard template.

Globe: Internally fluted, clear tempered glass, fully gasketed.

Socket: Porcelain medium base rated 4KV for HID and incandescent.Fluorescent is13W-GX23-2; 42W-G24q-4 - Universal Socket.

Ballast: Factory mounted to rigid harness suspended from fixture headwithin the Riser. Wire leads supplied to base. HID: High power factor withstarting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting. 26W, 32W, 42W Fluorescent: 120V through 277V High power factor withstarting temperatureof 0°F.

Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,Platinum Silver, or White. Custom colors are available.

CAUTION: Fixtures must be grounded in accordance with national, stateand/or local electrical codes. Failure to do so may result in seriouspersonal injury.

Listings and RatingsULcUL 1598 IP46 Rated CE 25C Ambient

IESNA Rated - Cut OffIDA Rated - Full Shielded

KIM LIGHTING 7

CB

Ordering Information Compact Bollards

142PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).

NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.

NOTE: For CB32 model only.

NOTE: For CB32 model only.

50PMH120 70PMH120 50HPS120 70HPS12050PMH208 70PMH208 50HPS208 70HPS20850PMH240 70PMH240 50HPS240 70HPS24050PMH277 70PMH277 50HPS277 70HPS277

70PMH347 70HPS347

100INC120 13PL120 42PL1201

13PL277 42PL2081

42PL2401

42PL2771

Lamp Lamp LineWatts Type Volts

50 PMH 277

LuminaireFixture Electrical Module Finish Option

CB32 / 50PMH277 / WH / HS1 2 3 4

3 Luminaire Finish:Super TGIC powder coat paint over titanated zirconiumconversion coating.

Ordering Example:

1 Fixture:Cat. No. designates CB fixture.

2 Electrical Module:PMH = Pulse Start Metal Halide

HPS = High Pressure Sodium

INC = Incandescent

PL = Compact Fluorescent

See lamp and electrical data onpage 69 for ballast types andcharacteristics.

Cat. No.: CB24Cat. No.: CB32

NOTE: 70W PMHand HPS are notrecommended forCB24 due toextreme light levelsat fixture base.

4 Optional HousesideShield:

Cat. No.: HS 180° trimmable houseside shield that inserts inside lamp enclosure .032" thick naturalaluminum, trimmable in field.

Color: Black Dark Bronze Light Gray Stealth Gray™ Platinum Silver White Custom ColorsCat. No.: BL DB LG SG PS WH CC

Consultrepresentativefor custom colors.

5 Optional EmergencyBattery Back-up:For Compact Fluorescent only.

Cat. No.: EM Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for26, 32 or 42 watt compact fluorescent lamps.

6 Optional Cold-PackEmergency Battery Pack:

Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.

Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplementallight. See table at right for max. lumens output by lamps.

Lamp (4-Pin) 1 lamp lumens42W 75032W 57526W 450

KIM LIGHTING 9

VRB

Configurations Vandal Resistant Round Bollards

Dual Function LuminaireVRB2 and VRB4 Horizontal louvers provide 210° of cutoff down-lighting, and vertical louvers provide 150° of non-cutoff accent lighting.Designed for lighting walkways where adjacent building facades, wallsor landscaping may be enhanced by a vertical wash of light. Fixturesshould be viewable from the walkway only. See page 10.

Single Function LuminaireVRB1 and VRB3 Horizontal louvers provide 360° of down-lightingwith total lamp source cutoff above 90° horizontal. Designed forlighting walkways, entrances, courtyards, and landscaped areaswhere fixtures are viewable from all directions. See page 10.

10 KIM LIGHTING

VRB

Vandal Resistant Round Bollards FeaturesVRB1 and VRB3 Single Function Luminaire

360° Horizontal Louvers

360°

65° Louver AngleCompact glass lamp enclosureallows deep horizontal louvers witha high angle for greater light throw.Closed vertical spacing eliminatesdirect viewing of the light sourceabove horizontal, ensuring glare-free, efficient illumination.

High-Angle Light ThrowExcellent light uniformity andfixture spacing is achieved asa result of the high-angle lightthrow. Peak candlepower is at67.5°.

Total Source Cutoff Above 90°

Vertical Wash Option (VRB2and VRB4)150° of unobstructed illuminationprovides accent light on buildingfacades, walls or landscaping.Vertical louvers provide protectionand shielding along this non-cutoffsegment of the fixture.

Vertical Section

Shadowless LightingInternal flutes in the glass lampenclosure eliminate shadows byrefracting light around structuralsupports and vertical louvers.Phosphor coated lamps are recommended, and VRB2 andVRB4 models should belocated at least 10' from thevertical surface for best results.

Internally fluted, tempered and gasketed glass lamp enclosure.

Horizontal Sectionat Light Center

210° 150°

VRB2 and VRB4 Dual Function Luminaire

210° Horizontal Louvers, 150° Vertical Louvers

KIM LIGHTING 11

VRB

Features Vandal Resistant Round Bollards

Vandal ResistantConstructionLuminaire components areheavy-wall aluminum castings.The top cap is available in eitherdomed or flat-top configuration,and the louver modules areone-piece castings whichprovide greater strength thanindividually stacked louvers.

Concealed AccessAdded security againstvandalism is provided byconcealed access screws. A standard allen wrenchloosens screws, allowingaccess for lamp replacement bytwist-lock removal of the topcap. Complete removal ofscrews is not required.

Air CoolingNatural air currents provideflow-through ventilation, coolingthe exterior metal surfaces andinterior optical compartment,thereby minimizing excessiveheat build-up.

Installation and Mounting Base Details

Installation in SoilInstallation inPaving or Hardscape

Electrical components are factory mounted and prewired to a rigid bracket, bolted to the anchor base.

Aluminum shaft bollards are installed with anchor bolts in a poured-in-place footing (by others). Internal anchor base is leveled prior to installing the shaft.

Aluminum shaft twist-locks to the base casting and secures with two recessed allen screws.

Aluminum Shaft

SoilPaving


Electrical components are factory mounted and prewired to a rigidharness, suspended within the shaft.

Concrete shaft bollards are installed with anchor bolts embedded in a below grade, poured-in-place footing (by others). Leveling nuts make installation and alignment fast and accurate. All fastening hardware must not contact soil or other corrosive elements.

When mounting in soil, anchor bolt fasteners and other hardware must be protected from soil by grouting.

Concrete Shaft

Soil Paving

Wiring and footing (by others).


12 KIM LIGHTING

VRB1 / VRB3

Vandal Resistant Round Bollards SpecificationsVRB1 and VRB3Top Cap: One-piece, low-copper (<0.6% Cu) aluminum F" minimumthickness, secured to louvers by concealed allen screws in keyhole slots. Forrelamping access, allen screws shall not require complete removal. VRB1: Domed Top VRB3: Flat TopLouvers: Die cast, low-copper (<0.6% Cu) aluminum horizontal louvers withfour vertical ribs for concealed mounting hardware. 65° upward pitch andprovides fully shielded lamp. Louver casting shall be secured to shaft by fourinternal tie rods.Lamp Enclosure: One-piece tempered molded glass with internal flutes andfull gasketing at bottom edge.Socket: Porcelain medium base socket rated 4KV for HID and incandescent.Plastic socket for Fluorescent.Fixture Head: Allows flow-through ventilation around and above the lamp enclosure.Shaft: One-piece extruded aluminum, .125" wall thickness with a heavy castaluminum twist-lock anchor base concealed within the shaft. Concealed setscrews shall lock shaft onto the cast anchor base.Ballast: VRB1 and VRB3 - Factory mounted to rigid harness attached to theanchor base. Wiring shall be supplied from the socket for field connection tothe prewired ballast components. HID: High power factor with startingtemperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,42W Fluorescent: High power factor with starting temperature of 0°F.VRB1C and VRB3C - Factory mounted to rigid harness for field wiring andsuspension from fixture head within the concrete shaft. Wire leads supplied tobase. HID: High power factor with starting temperatures of -20°F. for PMH and-40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factorwith starting temperature of 0°F.Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,washers and a rigid pressed board template.Finish/Color: Finish is Super TGIC thermoset polyester powder coat paint, 2.5mil nominal thickness, applied over a titanated zirconium conversion coating;A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are Black,Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver, or White. Custom colorsare available.CAUTION: Fixtures must be grounded in accordance with national, state and/orlocal electrical codes. Failure to do so may result in serious personal injury.

VRB1C and VRB3C Concrete Shaft SpecificationsMaterial: Cement shall conform to current specifications for “PortlandCement.” ASTM C150, Type I or II. Aggregates shall meet currentrequirements of “Specifications for Concrete Aggregates,” ASTM C33. Watershall be clean and free from deleterious amounts of silt, oil, acids, alkalies ororganic materials. Wire for reinforcement shall conform to ASTM A185. Steel forlugs and plates shall conform to ASTM A36, or A283 grade D.Surface: Medium sand-blasted with anti-graffiti sealer. Available colors areCharcoal, Brown, Natural Gray or White, integral in concrete mix.Cure and Strength: Allows for completion of the hydration process, and resultin a 28 day compressive strength of not less than 4,500 psi.Manufacture: Fiberglass molds used to insure uniform parts. Mold partinglines may be slightly visible in finished parts.Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zincelectroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,two washers, and a rigid pressed board template.Shipment: Palletized with adequate hold-downs to prevent load movement in transit.VRBC same as VRB1C except:No fixture, electrical elements, or conduit openings. Flat top not available.

1K"(38.1 mm)

ANCHOR BOLT PROJECTION

VRB Models70 to 100 wattMedium Base Lamps42 watt Compact Fluorescent

VRB1 - Single Function Luminaire (Aluminum Shaft)Maximum weight: 30 lb

VRB1C - Single Function Luminaire (Concrete Shaft)Maximum weight: 115 lb

VRBC - Unlighted Concrete BollardMaximum weight: 150 lb

BASE PLANVRB

ALUMINUM SHAFT

*30" OR 36" OVERALL HEIGHTAVAILABLE - CONTACT KIM REPRESENTATIVE

(27K" ABSOLUTE MINIMUM)

30"(762.0 mm)MINIMUMHEIGHTABOVEGRADE

6"(152.4 mm)

42"(1066.8 mm)MAXIMUMHEIGHTABOVEGRADE

8"(203.2 mm)

DIA.

5" (127.0 mm) BOLT CIRCLE DIA.

BASE PLANVRB

CONCRETE SHAFT

8"(203.2 mm)

DIA.

3C"(85.7 mm)CONDUITOPENING

9K" (241.3 mm) BOLT CIRCLE DIA.

BASE PLANVRBC

8"(203.2 mm)

DIA.

9K" (241.3 mm)BOLT CIRCLE DIA.

9"(228.6 mm)

8"(203.2 mm)

DIA.

42"*(1066.8 mm)

9"(228.6 mm)

8"(203.2 mm)

DIA.

36"(914.4 mm)

LIGHTCENTERHEIGHT

6"(152.4 mm)


3L"(95.3 mm)CONDUITOPENING

1616"(406.4 mm)(406.4 mm)MAXIMUMMAXIMUM

BURIAL DEPTH BURIAL DEPTH

16"(406.4 mm)MAXIMUM

BURIAL DEPTH



KimNOW! Available Configurations:

KN-VRB1/100PMH/DB*,KN-VRB1/100PMH/WH*,KN-VRB1/42PL/DB**,KN-VRB1/42PL/WH** * Multi-tap ballast (120, 208, 240, or 277 volts)** Variable voltage ballast (120 thru 277 volts)

KIM LIGHTING 13

VRB1 / VRB3

Ordering Information Vandal esistant ound Bollards

ConcreteTop Cap Shaft

Fixture Electrical Module Finish Finish Option

VRB1C / 70PMH120 / BL / CH-C/ HS1 2 3 4 5

ConcreteFixture Finish

VRBC / CH-C1 4

142PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.



70 PMH 120Coated lamps recommended.



PL = Compact FluorescentSee lamp and electrical data onpage 69 for ballast types andcharacteristics.


Ordering Example:

1 Fixture:Cat. No. designates VRB1 andVRB3 fixture and shaft.

Top Caps available:

UnlightedConcrete BollardFixture with Concrete Shaft


VRB1/ 70PMH120/ BL / HS1 2 3 5

Fixture with Aluminum Shaft

Cat. No.: VRB1 VRB3Domed Top Flat Top

Cat. No.: VRB1C VRB3CDomed Top Flat Top

Cat. No.: VRBC

42PL1201

42PL2081

42PL2401

42PL2771

70PMH120 100PMH120 70HPS120 100HPS12070PMH208 100PMH208 70HPS208 100HPS20870PMH240 100PMH240 70HPS240 100HPS24070PMH277 100PMH277 70HPS277 100HPS27770PMH347 100PMH347 70HPS347 100HPS347

NOTE: Black and Dark Bronze colors will produce slightly less louverbrightness than Light Gray or White. See below.

VRB1 and VRB3 models areprovided with matching powdercoat paint finishes on fixtureand shaft. Standard colors areas follows:

VRB1 - Domed Top

VRB3 - Flat Top



Ballast for aluminumshaft

Ballast for concreteshaft



4 Concrete Finish: Color: Brown Charcoal Natural Gray WhiteCat. No.: BR-C CH-C NG-C WH-C

Cat. No.:Color:

BLBlack

DBDark Bronze

LGLight Gray

PSPlatinum Silver

WHWhite

SGStealth Gray™





Available colors areintegral in concrete mix.


14 KIM LIGHTING

VRB2 / VRB4

Vandal Resistant Round Bollards SpecificationsTop Cap: One-piece, low-copper (<0.6% Cu) aluminum F" minimumthickness, secured to louvers by concealed allen screws in keyhole slots. Forrelamping access, allen screws shall not require complete removal. VRB2: Domed Top. VRB4: Flat Top.Louvers: One-piece, low-copper (<0.6% Cu) aluminum with horizontal andvertical blades. Horizontal louvers shall provide 210° of downlighting withsource cutoff above horizontal. Vertical louvers shall provide 150° of non-cutofflighting. Horizontal louver blades shall have a 1L" depth with a 65° upwardpitch from horizontal. Vertical louver blades shall have a 1L" depth with 30°spacing. Louver casting shall be secured to shaft by four internal tie rods.Lamp Enclosure: One-piece tempered molded glass with internal flutes andfull gasketing at bottom edge.Socket: Porcelain medium base socket rated 4KV for HID and incandescent.Plastic socket for Fluorescent.Fixture Head:Allows flow-through ventilation around and above the lamp enclosure.Shaft: One-piece extruded aluminum, .125" wall thickness with a heavy castaluminum twist-lock anchor base concealed within the shaft. Concealed setscrews shall lock shaft onto the cast anchor base.Ballast: VRB2 and VRB4 - Factory mounted to rigid harness attached to theanchor base. Wiring shall be supplied from the socket for field connection tothe prewired ballast components. HID: High power factor with startingtemperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,42W Fluorescent: High power factor with starting temperature of 0°F.VRB2C and VRB4C - Factory mounted to rigid harness for field wiring andsuspension from fixture head within the concrete shaft. Wire leads supplied tobase. HID: High power factor with starting temperatures of -20°F. for PMH and-40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factorwith starting temperature of 0°F. Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,washers and a rigid pressed board template.Finish/Color: Finish is Super TGIC thermoset polyester powder coat paint, 2.5mil nominal thickness, applied over a titanated zirconium conversion coating;A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors areBlack, Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver, or White.Custom colors are available.CAUTION:Fixtures must be grounded in accordance with national, state and/orlocal electrical codes. Failure to do so may result in serious personal injury.VRB2C and VRB4C Concrete Shaft SpecificationsMaterial: Cement shall conform to current specifications for “PortlandCement.” ASTM C150, Type I or II. Aggregates shall meet currentrequirements of “Specifications for Concrete Aggregates,” ASTM C33. Watershall be clean and free from deleterious amounts of silt, oil, acids, alkalies ororganic materials. Wire for reinforcement shall conform to ASTM A185. Steel forlugs and plates shall conform to ASTM A36, or A283 grade D.Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are:Charcoal, Brown, Natural Gray or White, integral in concrete mix.Cure and Strength: Allows for completion of the hydration process, and resultin a 28 day compressive strength of not less than 4,500 psi.Manufacture: Fiberglass molds used to insure uniform parts. Mold partinglines may be slightly visible in finished parts.Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zincelectroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,two washers, and a rigid pressed board template.Shipment: Palletized with adequate hold-downs to prevent load movement in transit.VRBC sameas VRB2C: No fixture, electrical elements, or conduit openings. Flat top not available.

1K"(38.1 mm)


VRB Models70 to 100 wattMedium Base Lamps42 watt Compact Fluorescent

VRB2 - Dual Function Luminaire (Aluminum Shaft)Maximum weight: 30 lb

VRB2C - Dual Function Luminaire (Concrete Shaft)Maximum weight: 115 lb

36"(914.4 mm)

LIGHTCENTERHEIGHT

VRBC - Unlighted Concrete BollardMaximum weight: 150 lb

BASE PLANVRB

ALUMINUM SHAFT


6"(152.4 mm)


8" (203.2 mm)

DIA.


BASE PLANVRB

CONCRETE SHAFT

8" (203.2 mm)

DIA.



9"(228.6 mm)

8" (203.2 mm)

DIA.

42"*(1066.8 mm)

9"(228.6 mm)

8"(203.2 mm)

DIA.

6"(152.4 mm)


BASE PLANVRBC

8" (203.2 mm)

DIA.





1616" (406.44 mm) (406.44 mm)MAXIMUMMAXIMUM

BURIAL DEPTHBURIAL DEPTH

16" (406.44 mm)MAXIMUM

BURIAL DEPTH



70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347

100PMH120 100HPS120100PMH208 100HPS208100PMH240 100HPS240100PMH277 100HPS277100PMH347 100HPS347



KIM LIGHTING 15

VRB2 / VRB4

Ordering Information Vandal esistant ound Bollards

Cat. No.: VRB2 VRB4Domed Top Flat Top

Cat. No.: VRB2C VRB4CDomed Top Flat Top

Cat. No.: VRBC

Lamp Lamp LineWatts Type Volts100 HPS 120





ConcreteTop Cap Shaft

Fixture Electrical Module Finish Finish

VRB2C /100HPS120/ LG /NG-C1 2 3 4

LuminaireFixture Electrical Module Finish

VRB2/100HPS120/ LG1 2 3Fixture with Aluminum Shaft


VRBC /NG-C1 4

Unlighted ConcreteBollardFixture with Concrete Shaft

Ordering Example:

70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347




Coated lamps recommended.

1 Fixture:Cat. No. designates VRB2 andVRB4 fixture and shaft.

Top Caps available:

VRB2 - Domed Top

VRB4 - Flat Top










VRB2 and VRB4 models areprovided with matching powdercoat paint finishes on fixtureand shaft. Standard colors areas follows: Cat. No.:

Color:BLBlack

DBDark Bronze

LGLight Gray

PSPlatinum Silver

WHWhite

SGStealth Gray™

Dual Function LuminaireVSB2 Horizontal louvers provide 270° of cutoff down-lighting, andvertical louvers provide 90° of non-cutoff accent lighting. Designedfor lighting walkways where adjacent building facades, walls orlandscaping may be enhanced by a vertical wash of light. Fixturesshould be viewable from the walkway only. See page 18.

KIM LIGHTING 17

VSB

Configurations Vandal Resistant Square Bollards

Single Function LuminaireVSB1 Horizontal louvers provide 360° of down-lighting with totallamp source cutoff above 90° horizontal. Designed for lightingwalkways, entrances, courtyards, and landscaped areas where fixtures are viewable from all directions. See page 18.

18 KIM LIGHTING

VSB

Vandal Resistant Square Bollards FeaturesVSB2 Dual Function Luminaire

270° Horizontal Louvers, 90° Vertical Louvers

Superior Illumination and Glare ControlA compact glass lamp enclosureallows deep horizontal louvers angledfor maximum light throw. Closevertical spacing of the louversprovides a 90° cutoff angleeliminating direct viewing of the lightsource above horizontal. This ensuresglare-free, efficient illumination with a peak candlepower of 67.5°, while still allowing for maximum spacingbetween luminaires.

Total Source Cutoff Above 90°Vertical Wash Option (VSB2)90° of illumination

Vertical Section

Shadow ControlInternal flutes in the glass lamp enclosure decrease shadowing by diffusing or scattering light around theVSB’s structural supports. Phosphorcoated lamps are recommended,and VSB2 models should be locatedat least 10' from the vertical surfacebeing illuminated by the verticallouver fixture segment.

Internally fluted, tempered and gasketed glass lamp enclosure.

Horizontal Sectionat Light Center

270° 90°

VSB1 Single Function Luminaire

360° Horizontal Louvers

360°

KIM LIGHTING 19

VSB

Features Vandal Resistant Square Bollards

Vandal ResistantConstructionLuminaire components utilizeheavy-wall aluminum castings.The gabled top not only withstands high impact, but thedesign also discourages its useas a resting place. The designof the VSB louver modulesprovide greater strength thanindividually stacked louvers.Each louver module interlocksforming a rugged, highlyvandal-resistant fixture head.

Heat ControlExcessive heat build-up is minimized by the VSB’s openlouver architecture. Natural aircurrents provide flow-throughventilation, cooling the top metalsurfaces and interior opticalcompartment. Yet, the lampcompartment is totally sealedfor weatherproof operation.





Aluminum shaft locks to the base casting and secures with four hex socket stainless steel screws.

Aluminum Shaft

SoilPaving





Concrete Shaft

Soil Paving



Concealed AccessAdded security againstvandalism is provided byconcealed access screws. A standard allen wrench is theonly tool needed to loosenhidden screws, allowing for easyaccess to the lamp enclosure.Complete removal of screws is not necessary. A twist andlock top casting is simplyremoved to allow accessfor re-lamping.

20 KIM LIGHTING

VSB1

Vandal Resistant Square Bollards SpecificationsTop Cap: One-piece die-cast, low-copper (<0.6% Cu) aluminum F" minimumthickness, secured to louvers by concealed stainless steel allen screws in keyhole slots. For relamping access, allen screws shall not require complete removal.Louvers: One-piece die-cast, low-copper (<0.6% Cu) aluminum with verticalsupport ribs at 90° intervals. Horizontal louver blades shall have a 1L" depth,and be angled 25° from the horizontal. Louvers shall provide light sourcecutoff above horizontal. Louver castings shall be secured to shaft by fourinternal tie rods.Lamp Enclosure: One-piece tempered molded glass with internal flutes andfull silicone gasketing at bottom edge.Socket: Porcelain medium base socket rated 4KV for HID Plastic socket for Fluorescent.Fixture Head: Allows flow-through ventilation around and above the lamp enclosure.Shaft: One-piece extruded aluminum, .156" minimum wall thickness with aheavy cast aluminum anchor base concealed within the shaft. Hex socketstainless steel screws shall lock shaft onto the cast anchor base.Ballast: VSB1- Factory mounted to rigid harness attached to the anchor base.Wiring shall be supplied from the socket for field connection to the prewiredballast components. HID: High power factor with starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42WFluorescent: High power factor with starting temperature of 0°F.VSB1C - Factory mounted to rigid harness for field wiring and suspension fromfixture head within the concrete shaft. Wire leads supplied to base. HID: Highpower factor with starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factorwith starting temperature of 0°F. Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,washers and a rigid pressed board template.Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,Platinum Silver, or White. Custom colors are available.CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in seriouspersonal injury.

VSB1C Concrete Shaft SpecificationsMaterial: Cement shall conform to current specifications for “Portland Cement.”ASTM C150, Type I or II. Aggregates shall meet current requirements of“Specifications for Concrete Aggregates,” ASTM C33. Water shall be clean andfree from deleterious amounts of silt, oil, acids, alkalies or organic materials. Wirefor reinforcement shall conform to ASTM A185. Steel for lugs and plates shallconform to ASTM A36, or A283 grade D.Surface: Medium sand-blasted with anti-graffiti sealer. Available colors areCharcoal, Brown, Natural Gray or White, integral in concrete mix.Cure and Strength: Allows for completion of the hydration process, and resultin a 28 day compressive strength of not less than 4,500 psi.Manufacture: Fiberglass molds used to insure uniform parts. Mold partinglines may be slightly visible in finished parts.Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zincelectroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,two washers, and a rigid pressed board template.Shipment: Palletized with adequate hold-downs to prevent load movement in transit.

VSBC same as VSB1C except:No fixture, electrical elements or conduit openings.

VSB Models70 to 100 wattMedium Base Lamps42 watt Compact Fluorescent

VSBC - Unlighted Concrete BollardMaximum weight: 175 lb


8"(203.2 mm)


8"(203.2 mm)

DIA.

10"(254.0 mm)

10"(254.0 mm)




8"(203.2 mm)

DIA.

8"(203.2 mm)



BASE PLANVSBC

8"(203.2 mm)


43"(1092.2 mm)

1K"(38.1 mm)


7"(177.8 mm)

VSB1 - Single Function Luminaire (Aluminum Shaft)Maximum weight: 35 lb

VSB1C - Single Function Luminaire (Concrete Shaft)Maximum weight: 120 lb

36"(914.4 mm)

LIGHTCENTERHEIGHT

7"(177.8 mm)

BASE PLANVSB

ALUMINUM SHAFT

BASE PLANVSB

CONCRETE SHAFT



1515" " (381.0 mm)(381.0 mm)MAXIMUMMAXIMUM

BURIAL DEPTHBURIAL DEPTH


BURIAL DEPTH





KIM LIGHTING 21

VSB1

Ordering Information Vandal esistant S uare Bollards

Ordering Example:

1 Fixture:Cat. No. designates VSB fixtureand shaft.

Cat. No.: VSB1 Cat. No.: VSB1C Cat. No.: VSBC

3 Luminaire Finish:Super TGIC powder coat paint over titanated irconiumconversion coating.

ConcreteLuminaire Shaft

Fixture Electrical Module Finish Finish Option

VSB1C/ 70PMH120/ BL / CH-C/ HS1 2 3 4 5


VSBC / CH-C1 4Unlighted

Concrete BollardFixture with Concrete Shaft


VSB1/ 70PMH120/ BL / HS1 2 3 5

Fixture with Aluminum Shaft


70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347



Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental light. See table at right for max. lumens output by lamps.


70 HPS 120





70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347










VSB1 models are provided withmatching powder coat paintfinishes on fixture and shaft.Standard colors are as follows:

Cat. No.:Color:

BLBlack

DBDark Bronze

LGLight Gray

PSPlatinum Silver

WHWhite

SGStealth Gray™



22 KIM LIGHTING

VSB2

Vandal Resistant Square Bollards SpecificationsTop Cap: One-piece die-cast, low-copper (<0.6% Cu) aluminum F" minimumthickness, secured to louvers by concealed stainless steel allen screws in keyhole slots. For relamping access, allen screws shall not require complete removal.Louvers: One-piece die-cast, low-copper (<0.6% Cu) aluminum with horizontaland vertical blades. Horizontal louvers shall provide 270° of down-lighting withsource cutoff above horizontal. Vertical louver shall provide 90° of non-cutofflighting. Horizontal louver blades shall have a 1L" depth, and be angled 25° fromthe horizontal. Vertical louver blades shall have a 1L" depth with a 45° spacing.Louver castings shall be secured to shaft by four internal tie rods.Lamp Enclosure: One-piece tempered molded glass with internal flutes and fullsilicone gasketing at bottom edge.Socket: Porcelain medium base socket rated 4KV for HID and incandescent.Plastic socket for Fluorescent.Fixture Head: Allows flow-through ventilation around and above the lamp enclosure.Shaft: One-piece extruded aluminum, .156" minimum wall thickness with a heavycast aluminum anchor base concealed within the shaft. Hex socket stainlesssteel screws shall lock shaft onto the cast anchor base.Ballast: VSB2 - Factory mounted to rigid harness attached to the anchor base.Wiring shall be supplied from the socket for field connection to the prewiredballast components. HID: High power factor with starting temperatures of -20°F.for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: Highpower factor with starting temperature of 0°F. VSB2C - Factory mounted to rigidharness for field wiring and suspension from fixture head within the concreteshaft. Wire leads supplied to base. HID: High power factor with startingtemperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,42W Fluorescent: High power factor with starting temperature of 0°F.Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,washers and a rigid pressed board template.Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,Platinum Silver, or White. Custom colors are available.

CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in seriouspersonal injury.

VSB2C Concrete Shaft SpecificationsMaterial: Cement shall conform to current specifications for “Portland Cement.”ASTM C150, Type I or II. Aggregates shall meet current requirements of“Specifications for Concrete Aggregates,” ASTM C33. Water shall be clean andfree from deleterious amounts of silt, oil, acids, alkalies or organic materials. Wire forreinforcement shall conform to ASTM A185. Steel for lugs and plates shall conformto ASTM A36, or A283 grade D.Surface: Medium sand-blasted with anti-graffiti sealer. Available colors areCharcoal, Brown, Natural Gray or White, integral in concrete mix.Cure and Strength: Allows for completion of the hydration process, and result ina 28 day compressive strength of not less than 4,500 psi.Manufacture: Fiberglass molds used to insure uniform parts. Mold parting linesmay be slightly visible in finished parts.Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zincelectroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts, twowashers, and a rigid pressed board template.Shipment: Palletized with adequate hold-downs to prevent load movement in transit.

VSBC same as VSB2C except:No fixture, electrical elements or conduit openings.

VSB Models70 to 100 wattMedium Base Lamps42 watt Compact Fluorescent

VSBC - Unlighted Concrete BollardMaximum weight: 175 lb


8"(203.2 mm)


8" (203.2 mm)

DIA.




8"(203.2 mm)

DIA.

8"(203.2 mm)



BASE PLANVSBC

8"(203.2 mm)


43"*(1092.2 mm)

1K"(38.1 mm)


VSB2 - Dual Function Luminaire (Aluminum Shaft)Maximum weight: 35 lb

VSB2C - Dual Function Luminaire (Concrete Shaft)Maximum weight: 120 lb

10"(254.0 mm)

7"(177.8 mm)

36"(914.4 mm)

LIGHTCENTERHEIGHT

10"(254.0 mm)

7"(177.8 mm)

BASE PLANVSB

ALUMINUM SHAFT

BASE PLANVSB

CONCRETE SHAFT




BURIAL DEPTH



KIM LIGHTING 23

VSB2

Ordering Information Vandal esistant S uare Bollards

ConcreteLuminaire Shaft

Fixture Electrical Module Finish Finish

VSB2C / 70PMH277 /LG / NG-C1 2 3 4

Ordering Example:

1 Fixture:Cat. No. designates VSB fixtureand shaft.


VSB2 / 70PMH27 / LG1 2 3


VSBC / NG-C1 4

Cat. No.: VSB2 Cat. No.: VSB2C Cat. No.: VSBC

Fixture with Aluminum Shaft Unlighted ConcreteBollardFixture with Concrete Shaft



3 Luminaire Finish:Super TGIC powder coat paint over titanated irconiumconversion coating.


70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347





70 HPS 120





70PMH120 70HPS120 42PL1201

70PMH208 70HPS208 42PL2081

70PMH240 70HPS240 42PL2401

70PMH277 70HPS277 42PL2771

70PMH347 70HPS347










VSB2 models are provided withmatching powder coat paintfinishes on fixture and shaft.Standard colors are as follows:

Cat. No.:Color:

BLBlack

DBDark Bronze

LGLight Gray

PSPlatinum Silver

WHWhite

SGStealth Gray™



26 KIM LIGHTING

GEM™

Performance Bollards FeaturesClear lamp placed high in the optical systemPlacement of the lamp high in the optical system places the arc-tube above the horizontal illuminance plane. This reducesrefractor brightness while increasing luminaire efficiency in thedesired luminous zone at 60° from vertical.

Hydro-formed ReflectorHydro-formed reflector redirects light down onto pathways, awayfrom viewers’ eyes. Special design features direct light around thelamp to increase illuminance while eliminating streaks and shadowsin the beam pattern.

Fluted Glass RefractorPrecision molded tempered glass refractor spreads light evenly inthe beam pattern and eliminates shadows from the luminaire’ssupport structure.

Stepped Body BaffleThe stepped design of the lower body reduces surface brightnessand provides an attractive texture. Die-cast construction producessharp detailing.

Split Beam OpticsReflector design redirects light away from the lamp and into theuseable beam pattern. This provides high illuminance, withoutunnecessary brightness. The optical system is sealed top andbottom to eliminate the intrusion of dirt and insects.

Shadow-less LightingWorking in tandem with the upper reflector, the refractor spreadsilluminance laterally. This produces a smooth and even beampattern with no shadows from the fixture’s structural elements.

GEM™ BollardThe GEM™ is designed to produce high levels of illuminance and anattractive lens presence. The visible lens produces a point ofinterest and attracts attention. Particularly well suited where bollardsare used to identify and highlight entries or important walkways.

Louvered Bollards (VRB and VSB)Louvered bollards produce minimal brightness, wide low-levelillumination, and incorporate an optical system protected by heavycast louvers. The robust louvered bodies are well suited to vandalprone areas, and where fixture brightness is undesirable.(Data is shown for white fixture.)

GEM™ Performance vs. Louvered Bollards

70WMH

3'

13.4 Fc6'

5.4 Fc9'

1.7 Fc12'

0.5 Fc70WMH

3'

2.4 Fc6'

4.5 Fc9'

1.6 Fc12'

0.61 Fc

KIM LIGHTING 27

GEM™

Features Performance Bollards


Aluminum

TitanatedZirconiumConversionCoating

Powder Coat

•Eight Stage Finish1. Power wash and degrease.

2. Detergent tank bath.

3. Clear water rinse bath.

4. Premium titanated zirconiumconversion coating as used inthe automobile industry.

5. Clear water rinse bath.

6. Dry off oven.

7. Powder coating, 2.5 milnominal thickness.

8. Bake for 20 minutes at410°F.

Durable Powder Coat FinishKim’s state-of-the-art powder coat paint system is engineered toprovide the highest quality finish with absolute paint adhesion underweather extremes. The Super TGIC thermoset polyester powdercoat finish is applied over a titanated zirconium conversion coating.This finish system exceeds the A.S.T.M. 1000 hour salt spray test,enduring over 2500 hours without failure.

Standard Super TGICColorsBL Black

DB Dark Bronze

LG Light Gray

SG Stealth Gray™

PS Platinum Silver

WH White

ConstructionThe GEM™ lighted head is constructed of die-cast aluminum, with amolded glass refractor. Four captive, stainless steel fasteners areconcealed from view, yet provide easy access for routinemaintenance. The lens is not disturbed during re-lamping. The fixture head is secured to the shaft with heavy-duty stainlesssteel rods.

Installation inPaving or Hardscape


Aluminum shaft twist-locks to the base casting and secures with two recessed allen screws.

Aluminum Shaft

SoilPaving

Installation inSoil

Installation inPaving or Hardscape




Concrete Shaft

Soil Paving

Installation in Soil




•

•

28 KIM LIGHTING

GEM™

Performance Bollards SpecificationsGEM1Top Cap: Die-cast, low-copper (<0.6% Cu) aluminum secured to ribbody by captive stainless steel allen cap screws. For lamp access, allenscrews shall not require complete removal.Supports: Die-cast, low-copper (<0.6% Cu) aluminum supports securedin place as a complete cage assembly. The top section provides a cutofflamp compartment. The supports are secured to the shaft by fourstainless steel tie rods.Refractor: Thermally tempered soda lime glass sealed with siliconegaskets top and bottom.Socket: Porcelain medium base socket rated 4KV for HID Plastic socketfor Fluorescent.Shaft: One-piece aluminum extrusion, .125" minimum wall thickness witha heavy cast aluminum anchor base concealed within the shaft. Hex socket stainless steel set screws shall lock the shaft onto the cast frangible anchor base. See below for GEM1C concrete shaft specifications.Ballast: GEM1 - Factory mounted to rigid harness attached to the anchorbase. Wiring shall be supplied from the socket for field connection to theprewired ballast components. HID: High power factor with startingtemperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W and32W Fluorescent: High power factor with starting temperature of 0°F.GEM1C - Factory mounted to rigid harness for field wiring and suspensionfrom fixture head within the concrete shaft. Wire leads supplied to base.HID: High power factor with starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W and 32WFluorescent: High power factor with starting temperature of 0°F. LED: Atotal of 9 LED emitters configured in a rectangular array comprisedtogether as a module. Two (2) modules for 30 watt version; three (3)modules for 45 watt version; and four (4) modules for 60 watt version.Available in “Halogen White” (approx. 3500K). Emitters are directlyattached to the electronic driver.LED Driver: Constant current electronic driver. Rated for 30 watt, 45 watt or 60 watt. Available in 120 volt or 277 volt input.0°F. starting temperature. All drivers are Underwriters Laboratoriesrecognized. 120V versions are dimmable.Anchor Bolts: Four C" x 10" + 2" zinc plated J-bolts, each with two nuts,washers and a rigid pressed board template.Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,Platinum Silver, or White. Custom colors are available.CAUTION: Fixtures must be grounded in accordance with national, stateand/or local electrical codes. Failure to do so may result in seriouspersonal injury.

GEM1C Concrete Shaft Specifications:Material: Cement to conform to current specifications for “PortlandCement.” ASTM C150, Type I or II. Aggregates meet current requirementsof “Specifications for Concrete Aggregates,” ASTM C33. Water to be cleanand free from deleterious amounts of silt, oil, acids, alkalies or organicmaterials. Wire for reinforcement to conform to ASTM A185. Steel for lugsand plates to conform to ASTM A36, or A283 grade D.Surface: Medium sand-blasted with anti-graffiti sealer. Available colors areCharcoal, Brown, Natural Gray or White, integral in concrete mix.Cure and Strength: Allows for completion of the hydration process, andresults in a 28 day compressive strength of not less than 4,500 psi.Manufacture: Fiberglass molds used to insure uniform parts. Moldparting lines may be slightly visible in finished parts.Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2"

zinc electroplated J-bolts. Each anchor bolt is supplied with two nuts, twowashers, and a rigid pressed board template.Shipment: Palletized with adequate hold-downs to prevent load movement in transit.

9K"(241.3 mm)

9K"(241.3 mm)

9K"(241.3 mm)

DIA.

5K"(139.7 mm) 3K"

(88.9 mm)

42K"*(1079.5 mm)

1K"(38.1 mm)


37K"(952.5 mm)

LIGHTCENTERHEIGHT

5"(127.0 mm)

8" DIA.(203.2 mm)

GEM™ Models70 to 100 watt HIDMedium Base Lamps32 watt Compact Fluorescent

GEM1Maximum weight: 28 lb

GEM1CMaximum weight: 114 lb

8"(203.2 mm)

DIA.

9K" (241.3 mm)

DIA.

30K"(774.7 mm)MINIMUMHEIGHTABOVEGRADE

5"(127.0 mm)

OPTIONALHOUSESIDESHIELD

42K"(1079.5 mm)MAXIMUMHEIGHTABOVEGRADE

8"(203.2 mm)

DIA.





BASE PLANGEM

ALUMINUM SHAFT

BASE PLANGEM

CONCRETE SHAFT



8"(203.2 mm)

DIA.


BURIAL DEPTH


IESNA Rated - Semi Cut Off

KIM LIGHTING 29

GEM™

Ordering Information Performance BollardsConcrete Optional

Luminaire Shaft HousesideFixture Electrical Module Finish Finish Shield

GEM1C / 70PMH277 / PS / NG-C / HS1 2 3 4 5


70 PMH 277

Ordering Example:

1 Fixture:Cat. No. designates GEM™

fixture and shaft.

OptionalLuminaire Houseside

Fixture Electrical Module Finish Shield

GEM1 / 70PMH277 / PS / HS1 2 3 5




LED = Light Emitting Diode


70PMH12070PMH20870PMH24070PMH27770PMH347100PMH120100PMH208100PMH240100PMH277100PMH347

32PL1201

32PL2081

32PL2401

32PL2771

70HPS12070HPS20870HPS24070HPS27770HPS347100HPS120100HPS208100HPS240100HPS277100HPS347

Fixture with Aluminum Shaft Fixture with Concrete Shaft

132PL operates one 26 or 32 watt lamp at120 thru 277 volts (50-60 Hz).NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.

4 Shaft Finish: Aluminum Riser (Shaft):Shaft is finished to match fixture with superTGIC powder coat paint over t i tanatedzirconium conversion coating.

Cat. No.: Concrete Riser (Shaft):CH-C CharcoalBR-C BrownNG-C Natural GrayWH-C White


Houseside Shield

Cat. No.: GEM1 Cat. No.: GEM1C

Cat. No.: HS 90° trimmable houseside shield .032" thick aluminum, painted to match fixture.


Clear lamps recommended.



30LED12030LED27745LED12045LED27760LED12060LED277

IESType1

IESType3

IESType5







70PMH12070PMH20870PMH24070PMH27770PMH347100PMH120100PMH208100PMH240100PMH277100PMH347

32PL1201

32PL2081

32PL2401

32PL2771

70HPS12070HPS20870HPS24070HPS27770HPS347100HPS120100HPS208100HPS240100HPS277100HPS347

30LED12030LED27745LED12045LED27760LED12060LED277

IESType1

IESType3

IESType5

KIM LIGHTING 31

BNB

Configurations Bounce Bollard

Era Lantern Bollards also meet strict IES and IDA full cutoff darksky standards, and are constructed with Kim Lighting’s legendaryreputation for quality and durability to last a lifetime.

KimLighting.com offers lighting professionals unlimited access to the entire Era Lantern series, including specifications, photometry data, and design tools. Contact your Kim Lighting representative for additional assistance.

Era Lantern Bollard. This is outdoor lighting perfection. This is KimLighting.Kim Lighting’s exclusive Bounce Bollard series has beenbroadened to include several new shaft styles and design detailsto further complement Kim Lighting’s extensive Bounce® series ofarea, pedestrian scale, and wall-mounted luminaires. And now,new energy efficient LED modules, up to 60W, are now availablefor all Bounce Bollard models.

Unlike typical lantern products that emit themajority of their light in the horizontal plane, theKim Lighting Bounce series employs aningenious patented cutoff optical system forefficient distribution of illumination onto the ground andincorporates a controlled up-light feature for a comfortable, subtle, and unique nighttime presence. KimLighting’s Bounce Bollard series is perfect for pedestrian zones,congregation points, pathways, perimeters, or other lower-mountand landscape applications, and is ideal for traditional orcontemporary architecture requiring a striking European accent.

Visit www.kimlighting.com for complete specification, ordering, and photometry information on the entire Bounce family of luminaires.

New LED and Traditional Styling Options

BNB1 BNB2 BNB3

BNB4 BNB5 BNB6

KIM LIGHTING 33

BNB

Features Bounce Bollard

Easy Re-lampingLamp access is easily achievedby hinging open the hood. Thehood is retained by a stainlesssteel hinge, and three stainlesssteel captive screws concealedfrom normal view. Hood is fullysealed against moisture andinsects by a one-piece siliconegasket, creating a totally sealedoptical chamber.

Performance OpticsFor glare control, the BounceBollard utilizes a flat lens,horizontal lamp optical system.The cap produces bounce lightto illuminate pedestrians orsurrounding vertical elements.Due to the low mounting height,coated lamps are recommendedfor optimum uniformity on theground.

Optional Matte Black CapFor locations where completecutoff is desired, an optionalmatte black cap is available. If a very low nighttime fixturepresence is desired, it isrecommended that a black ordark bronze finish be used forthe entire bollard.

Quick and Easy InstallationA heavy-duty cast aluminumbase plate is mounted to fouranchor bolts and leveled withleveling nuts. Field wireconnections are made to theattached electrical componentsbefore the bollard shaft isinstalled. A pressed boardtemplate is provided to secureand position the anchor boltsduring the concrete pour.

Heavy-Duty BaseA heavy cast aluminum base ismechanically fastened to theextruded shaft for superiorstrength, and elimination ofunsightly welds. The base, andentire bollard, fastens to the pre-mounted base plate by fourblackened stainless steel bolts.

34 KIM LIGHTING

BNB

Bounce Bollard SpecificationsHood and Lens Frame: Die-cast, low copper (<0.6% Cu) aluminum alloywith stainless steel hinge. Hood is opened by loosening one stainlesssteel captive button-head socket cap screw. F" thick clear flat temperedglass lens seals against the lens frame by a one-piece molded siliconegasket. Lens frame seals against the hood by a one-piece extruded andvulcanized silicone gasket. Reflector Module: Specular Alzak® optical segments are rigidly mountedwithin an aluminum frame and fastened securely to the hood. A porcelainmedium base socket rated 4KV is provided for HID, and a GX24q-4universal socket is provided for fluorescent. Body Support: BNB1, BNB2, BNB3: Die-cast, low copper alloy (<0.6%Cu) aluminum flanges compress a ribbed extruded aluminum chamber.The four heavy wall extruded aluminum support rods are mechanicallyfastened to the lens frame with stainless steel fasteners. The support rodsare held in position through die-cast arms and mechanically fastened atthe bottom with a custom aluminum bolt. The electrical wiring ischanneled through a support rod with a brass bushing. BNB4, BNB5,BNB6: Heavy low copper alloy (<0.6% Cu) cast aluminum wiringchamber. The four extruded aluminum support rods are mechanicallyfastened between the lens frame and wiring chamber with stainless steelbolts. The wiring is channeled through the support rods.Body Cap: Die-cast, low copper (<0.6% Cu) aluminum, retained by twocaptive stainless steel screws. Optional matte black finish to eliminatebounce light. See page 35.Shaft: BNB1, BNB4: One-piece aluminum extrusion, .125" minimum wallthickness and two internal F" - 16 mounting rods sandwich shaftbetween base and head. Four internal stainless steel hex-head boltssecure the shaft to the anchor base plate. BNB2, BNB5: One-piecefluted aluminum extrusion, .188" minimum wall thickness and two internalF" - 16 mounting rods sandwich shaft between base and head. Fourinternal stainless steel hex-head bolts secure the shaft to the anchor baseplate. BNB3, BNB6: One-piece cast aluminum.188" minimum wallthickness and two internal F" - 16 mounting rods sandwich shaftbetween base and head.Anchor Base Plate: A heavy cast aluminum anchor base is provided formounting to the four C" x 10" + 2" zinc plated J-bolts, each with two nutsand washers. A rigid pressed board template is provided to secure theanchor bolts during concrete pour (5" B.C.D.)Electrical Module: Factory mounted to a rigid harness attached to theAnchor Base. HID: High Power Factor with starting temperatures of -20°F for PMH and -40°F for HPS lamp modes. Fluorescent: High PowerFactor with starting temperature of 0°F. LED: A total of 9 LED emittersconfigured in a rectangular array comprised together as a module. Two(2) modules for 30 watt version; three (3) modules for 45 watt version; andfour (4) modules for 60 watt version. Available in “Halogen White”(approx. 3500K). Emitters are directly attached to the electronic driver.LED Driver: Constant current electronic driver. Rated for 30 watt, 45 wattor 60 watt. Available in 120 volt or 277 volt input. 0°F. startingtemperature. All drivers are Underwriters Laboratories recognized. 120Vversions are dimmable.Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; 2500 hour salt spray test endurance rating. Standardcolors are Black, Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver,or White. Custom colors are available.CAUTION: Fixtures must be grounded in accordance with national, stateand/or local electrical codes. Failure to do so may result in seriouspersonal injury.

12" DIA.(304.8 mm)

3C"(85.7 mm)

12B"(308.0 mm)

5F" DIA.(131.8 mm)

12" DIA.(304.8 mm)

3C"(85.7 mm)

11"(279.4 mm)

5" DIA.(127.0 mm)

BNB 1/2/3 BNB 4/5/6

28"(711.2 mm)

28"(711.2 mm)

28"(711.2 mm)

5" DIA.(127.0 mm)

5" DIA.(127.0 mm)

5" DIA.(127.0 mm)

2G" x 3O"CONDUIT OPENING

8N" DIA.(217.5 mm)

5" BOLT CIRCLE DIA.

3L" x 1L"CONDUIT OPENING

10B" DIA.(257.2 mm)

9C" DIA.(238.1 mm)

9C" DIA.(238.1 mm)

10L" DIA.(273.1 mm)

Straight - BNB 1/4 Fluted - BNB 2/5 Traditional - BNB 3/6

5" BOLT CIRCLE DIA.

BNB Model70 to 100 watt PMH70 to 100 watt HPSMedium Base Lamps42 watt CFL30 to 60 watt LED


IESNA Rated - Full Cut OffIDA Rated - Full Shielded

KIM LIGHTING 35

BNB

Ordering Information Bounce Bollard

Cat. No.: HS Optional shield made of stamped louvered aluminum allows streetside light to pass whileblocking houseside light. Blackened reflector panels within the reflector also reduces thehouseside reflection.

Cat. No.: BNB1 BNB2 BNB3 BNB4 BNB5 BNB6


1 Fixture:Cat. No. designates BNB fixture.

2 Electrical Module:PMH = Pulse Start Metal HalideHPS = High Pressure Sodium

PL = Compact FluorescentLED = Light Emitting DiodeSee lamp and electrical data onpage 69 for ballast types andcharacteristics.

Ordering Example: LuminaireFixture Electrical Module Finish Options

BNB1 / 70PMH120 / BL / HS1 2 3 4-5

5 Optional Fusing:


Houseside Shield

6 Optional StarView™

Matte Black Body Cap:

Optional Cap



70PMH120 100PMH120 70HPS120 100HPS120 42PL1201 30LED12070PMH208 100PMH208 70HPS208 100HPS208 42PL2081 30LED27770PMH240 100PMH240 70HPS240 100HPS240 42PL2401

70PMH277 100PMH277 70HPS277 100HPS277 42PL2771 45LED12070PMH347 100PMH347 70HPS347 100HPS347 45LED277

60LED12060LED277


NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your localKim representative.

Cat. No.: BBC For locations where complete cutoff optical control is desired, an Optional Matte Black BodyCap can be specified. This significantly reduces the indirect up-light distribution, providingcomplete cutoff. To further reduce the nighttime visual presence of the fixture, specify Black orDark Bronze luminaire finish.


Consult representativefor custom colors.

IESType1

IESType3

IESType5

Line Volts: 120V 208V 240V 277V 347VCat. No.: SF DF DF SF SF





Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplementallight. See table at right for max. lumens output by lamps. Lamp (4-Pin) 1 lamp lumens

42W 75032W 57526W 450

KIM LIGHTING 37

LE

Configurations Era® Lantern Bollard

Choose One of Three Shaft StylesTimeless, high performance historical lighting integrationthroughout the site is now possible with Kim Lighting’s EraLantern luminaire collection, which now includes anauthentically detailed replica bollard series to complete the class.

Traditionally, “form before function” was the conventionalapproach to historic luminaire design, however Era LanternBollard optics are unmatched by any other period pathwayluminaire. Era Lantern Bollards feature high 95% reflectivity,precise light distributions, advanced Pulse Start Metal Halide,HPS, CFL and LED options, and battery back-up modules foremergency illumination.

Era Lantern Bollards also meet strict IES and IDAfull cutoff dark sky standards, and areconstructed with Kim Lighting’s legendaryreputation for quality and durability to last a lifetime.

KimLighting.com offers lighting professionals unlimited access to the entire Era Lantern series, including specifications, photometry data, and design tools. Contact your Kim Lighting representative for additional assistance.

Era Lantern Bollard. This is outdoor lighting perfection. This isKim Lighting.

LE1 LE2 LE3

38 KIM LIGHTING

LE

Era® Lantern Bollard SpecificationsHood and Lens Frame: Die-cast, low copper (<0.6% Cu) aluminumalloy with stainless steel hinge. Hood is opened by loosening one stainless steel captive button-head socket cap screw. F" thick clearflat tempered glass lens seals against the lens frame by a one-piecemolded silicone gasket. Lens frame seals against the hood by a one-piece extruded and vulcanized silicone gasket.

Arm: Double curved die-cast, low copper aluminum alloy with internal wiring chamber supports the hood and lens frame.

Hub: Die-cast, low copper aluminum alloy with a die cast accesscover. The hub is designed to support the arms.

Reflector Module: Specular Alzak® optical segments are rigidly mountedwithin an aluminum frame and fastened securely to the hood. A porcelainmedium base socket rated 4KV is provided for HID, and a GX24q-4universal socket is provided for fluorescent. No reflector provided for LED.

Anchor Base Plate: A heavy cast aluminum anchor base plate isprovided for mounting to the four C" x 10" + 2" zinc plated J-bolts,each with two nuts and washers. A rigid pressed board template is provided to secure the anchor bolts during concrete pour. 5" B.C.D.rods sandwich shaft between base and head.

Electrical Module: Factory mounted to a rigid assembly attached to theanchor base. HID: High Power Factor with starting temperatures of -20°F for PMH and -40°F for HPS lamp modes. Fluorescent: High PowerFactor with starting temperature of 0°F. LED: A total of 9 LED emittersconfigured in a rectangular array comprised together as a module.Two (2) modules for 30 watt version; three (3) modules for 45 wattversion; and four (4) modules for 60 watt version. Available in“Halogen White” (approx. 3500K). Emitters are directly attached tothe electronic driver.LED Driver: Constant current electronic driver. Rated for 30 watt, 45 watt or 60 watt. Available in 120 volt or 277 volt input.0°F. starting temperature. All drivers are Underwriters Laboratoriesrecognized. 120V versions are dimmable.

Riser: Smooth – The Riser assembly is a one-piece smooth aluminum extrusion (.188" minimum wall thickness) and a heavy castaluminum base cover. Two internal C" mounting rods sandwich riserbetween base and hub. Fluted – The riser assembly is a one-piecefluted aluminum extrusion (.188" minimum wall thickness) and aheavy cast aluminum base cover. Two internal C" mounting rodssandwich riser between base and hub. Traditional – The riser is aheavy cast aluminum base cover. Two internal C" mounting rodssandwich riser between base and hub.

Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Platinum Silver, orWhite. Custom colors are available.


5" BOLTCIRCLE DIA.

2G" x 3O"CONDUIT OPENING

8N" DIA.(217.5 mm)

5" BOLTCIRCLE DIA.

3L" x 1L"CONDUIT OPENING

10B" DIA.(257.2 mm)

28"(711.2 mm)

28"(711.2 mm)

28"(711.2 mm)

11K" DIA.(292.1 mm)

4N"(115.8 mm)

9D"(244.5 mm)

5B" DIA.(130.2 mm)

9C" DIA.(238.1 mm)

5" DIA.(127.0 mm)

9C" DIA.(238.1 mm)

10L" DIA.(273.1 mm)

5" DIA.(127.0 mm)

5" DIA.(127.0 mm)

Smooth - LE1 Fluted - LE2 Traditional - LE3

LE 1/2/3

LE Model70 to 100 watt PMH70 to 100 watt HPSMedium Base Lamps42 watt CFL30, 45 or 60 watt LED

Listings and RatingsULcUL 1598

1IP46 Rated CE 25C Ambient

IESNA Rated - Full Cut OffIDA Rated - Full Shielded

1Suitable for wet locations.


Internal Cold-Pack emergency battery pack provides upto 90 minutes of supplemental light. See table at right for

max. lumens output by lamps.

KIM LIGHTING 39

LE

Ordering Information Era Lantern Bollard


1 Fixture:Cat. No. designates BNB fixture.



PL = Compact FluorescentLED = Light Emitting DiodeSee lamp and electrical data onpage 69 for ballast types andcharacteristics.


LE1 / 70PMH120 / BL / HS1 2 3 4-5



Cat. No.: LE1 LE2 LE3

Cat. No.: HS Optional shield made of stamped louvered aluminum allows streetside light to pass whileblocking houseside light. Blackened reflector panels within the reflector also reduces thehouseside reflection.

5 Optional Fusing:


Houseside Shield

6 Lantern Enclosures:

Line Volts: 120V 208V 240V 277V 347VCat. No.: SF DF DF SF SF

Cat. No.: LS Lexan molded high transmission luminous white enclosure replaces standard glass lens.

Cat. No.: A Acrylic molded high transmission luminous white acrylic enclosure replaces standard glass lens.

Optional lanternenclosure

70PMH120 100PMH120 70HPS120 100HPS120 42PL1201 30LED12070PMH208 100PMH208 70HPS208 100HPS208 42PL2081 30LED27770PMH240 100PMH240 70HPS240 100HPS240 42PL2401

70PMH277 100PMH277 70HPS277 100HPS277 42PL2771 45LED12070PMH347 100PMH347 70HPS347 100HPS347 45LED277

60LED12060LED277


NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your localKim representative.

IESType1

IESType3

IESType5


Consult representativefor custom colors.





KIM LIGHTING 41

B30

Features Traditional Bollard

High Performance and Low GlareThe exclusive Kim opticalLouver system achieves abroad light distribution with low glare. A high degree ofvisibility is attained, allowinglower wattages and greaterfixture spacings for energyconservation and cost reduction.

Clean DetailingKim bollards are clean, simple,unobtrusive forms that look as good up close as they dofrom a distance. A precisionlook is attained with carefulattention to detail such as flushjoints, counter sunk fasteners,and quality components.

Quick and Easy installationBollards utilize a mounting ringcontaining the ballast andrelated electrical components.This ring is attached to the anchor bolts, leveled, and field wire connections are made prior to mounting the fixture.

Easy Re-lampDirect access to the lamp isachieved by simply removingthe top.

Simple MaintenanceWith the top removed, all major components are readilyaccessible for cleaning or replacement. Reflectors aremounted as a completely self-contained sub-assembly.

Concealed MountingBollard mounting hardwareutilizes a twist-lock baseconnection with concealedfasteners and set-screws.

42 KIM LIGHTING

B30

Traditional Bollard SpecificationsB30Top Cap: One-piece heavy gauge spun aluminum retained by two countersunk captive socket head fasteners, braced at outer edges byoptical assembly. L" thick insulation provided above lamp.Plastic Enclosure: V825-HID acrylic, optically clear, J" nominal wall, one-piece injection molded retained in an unstressed position by internalsupport through reflector assembly.Optical Assembly: Precision hydroformed optical louvers with specularAlzak® finish, removable as a one piece self-contained unit.Socket: Porcelain with nickel plated socket shell, rated 600 volts. 4KV pulse rated socket. Fluorescent is 42W-G24q-4 - Universal Socket.Shaft: One-piece extruded aluminum, wall thickness, .125" with heavycast aluminum twist-lock anchor base concealed within post. Post locksto base with (2) C" stainless steel cone point set screws.Gasketing: Fixture is silicone gasketed for weathertight operation.Wiring: Supplied with high temperature socket leads for field connectionto the prewired ballast components.Ballast: Factory mounted to rigid harness attached to the anchor base.Wiring shall be supplied from the socket for field connection to the prewiredballast components. HID: High power factor with starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42WFluorescent: High power factor with starting temperature of 0°F.Anchor Bolts: Four C" x 10" + 2" zinc electro-plated L-hook anchor bolts,each with two nuts and washers and a rigid pressboard template.



9"(228.6 mm)

8" DIA.(203.2 mm)

42"*(1066.8 mm)

1K"(38.1 mm)

ANCHOR BOLTPROJECTION

36"(914.4 mm)

LIGHTCENTERHEIGHT

6"(152.4 mm)

B30 Model70 to 100 watt Pulse Start Metal Halide 70 to 100 watt High Pressure SodiumMedium Base Lamps42 watt Compact Fluorescent

B30Maximum weight: 30 lb

BASE PLANB30


OPTIONALHOUSESIDESHIELD

8" DIA.(203.2 mm)


160°



IESNA Rated - Non Cut Off

KIM LIGHTING 3

B30

Ordering Information Traditional Bollard

Cat. No.: HS Eliminates backlight in unwanted areas such as ad acent property, or wherever an asymmetriclight distribution is desired. Constructed of sheet aluminum covering a 160° arc. Finished tomatch the fixture. Shield is fully ad ustable about a 360° rotation.

Cat. No.: B30


1 Fixture:Cat. No. designates B30 fixture.






B30-8R / 70HPS120 / BL / HS1 2 3 4-5


Houseside Shield

Cat. No.: LC Clear Polycarbonate

CAUTION: Use only when vandalism is anticipated to be high. Useful life is limited due toyellowing caused by UV from sunlight and HID lamps.

5 OptionalPolycarbonateEnclosure:

Polycarbonate enclosure


70 HPS 120Coated lamps recommended.

70PMH120 100PMH120 70HPS120 100HPS12070PMH208 100PMH208 70HPS208 100HPS20870PMH240 100PMH240 70HPS240 100HPS24070PMH277 100PMH277 70HPS277 100HPS27770PMH347 100PMH347 70HPS347 100HPS347

42PL1201

42PL2081

42PL2401

42PL2771



142PL operates one 26, 32, or 42 watt lamp at120 thru 277 volts (50-60 Hz).

NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kimrepresentative.


Internal Cold-Pack emergency battery pack provides upto 90 minutes of supplemental light. See table at right for

max. lumens output by lamps.





46 KIM LIGHTING

SL

Site Lightforms® FeaturesFull Cutoff Optics in SL1 - SL4For projects requiring full cutoff pole-mounted luminaires for lighttrespass or dark-sky considerations, the SL1 - SL4 maintains thistheme at the pedestrian level. Each SL fixture has an optical moduleengineered to produce an asymmetric light distribution using ahorizontal lamp, and flat tempered glass lens. Because of the lowmounting height, coated HID lamps are recommended for optimumuniformity of illumination.

Heavy-Wall Cast Aluminum HeadsKim SL fixtures are specifically designed and engineered tocombine contemporary form with rugged vandal-resistantconstruction. Low level luminaires are often subject to abusebecause of their proximity to pedestrian traffic. To combat this, allfixture heads are heavy-wall one-piece aluminum castings. SL models use concealed mechanical head-to-shaft connections forgreater strength and clean detailing. SL1 - SL4 models use flattempered glass lenses, and SL5 and SL6 models use flatpolycarbonate lenses.

One-Piece Extruded Aluminum ShaftsTo achieve a clean sharp-cornered architectural appearance withsuperior strength, all SL shafts are one-piece heavy-wall aluminumextrusions. Integral mounting tracks are incorporated for mechanicalattachment of the head and base, which provides superior strengthover welding.

Low Profile, High Strength BaseThe SL mounting base is unique in the lighting industry, combiningsuperior strength with a low-profile design. The shaft-to-baseattachment is by concealed bolts threaded into the shaft extrusion.Kim tests show this method to be twice the strength of a weldedconnection. Anchor bolts are provided with couplings, allowingstandard black stainless steel bolts to secure the base andeliminate unsightly protruding anchor bolts.

See page 47 for anchor bolt and installation details.

Template screw. Replaced with black stainless steel bolt at fixture installation.

Template

Female Coupling

Jam Nut

Anchor Bolt

Anchor Bolt Installation, Standard Base.

Anchor Bolt Installation, Concealed Base.

FinishedGrade

Level template and footing

FinishedGrade

Template

ConduitSystem(by others)

Concrete and Soil Engineering (by others) Finished

Installation, Standard Base.

Finished Installation, Concealed Base.

ExpansionJoint

ExpansionJoint

Paving


Level template and footing


Anchor Bolt Installation

Concrete and Soil Engineering (by others)

Template

FinishedGrade Ground

Cover

TopSoil


Finished Installation

KIM LIGHTING 47

SL

Installation Details Site Lightforms®

Anchor Bolts and TemplateAll SL models are suppliedcomplete with anchor bolts andrigid template. The unique anchorbolt system employs femalethreaded couplings that allowthe standard black stainless steelbolts to secure the base,eliminating unsightly protrudinganchor bolts.

Installation in Planted AreasWhen SL fixtures are to be installedin planted areas, slightly elevate the base to avoid prolongedsubmersion during heavy rains orirrigation. Allow ground cover orshrubbery to conceal the base. In this application, the templateelevation must allow for any top soilor mulch that will be added. The SL template is the same sizeas the fixture base, and can beused to shape the concrete footingto blend with the base casting. A carefully leveled template willprovide a smooth flat mountingsurface and a level fixture.

Installation in Paved AreasSL fixtures are easily installed inpaved areas with an option of astandard or concealed base detail.For standard base installations, the concrete footing is poured withthe template at finished grade level.While the SL base casting is verylow in profile, it can also be totallyconcealed by paving up to thefixture shaft. Although a concealedbase detail is aesthetically veryclean, it must be remembered that future removal will be difficult if required.

48 KIM LIGHTING

SL1

Site Lightforms® Specifications

8" (203.2 mm)

8E" (225.4 mm) 3B"

(79.4 mm)

42"*(1066.8 mm)

4K" (114.3 mm)

SL1 Model50 to 70 watt HIDMedium Base Lamps42 watt Compact Fluorescent

BASE PLAN SL1

*36" OVERALL HEIGHT AVAILABLE - CONTACT KIM REPRESENTATIVE

8" (203.2 mm)


9D" (244.5 mm)

37K" (952.5 mm)

LIGHT CENTER HEIGHT

SL1 Maximum weight: 37 lb


IESNA Rated - Full Cut Off

IDA Rated - Full Shielded

Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wallthickness with external reveal unifying head and shaft. Attachment toshaft is by four bolts concealed within the head.

Shaft: One-piece extruded aluminum with internal tracks for attachinghead and base.

Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured toshaft by four concealed stainless steel bolts.

Reflector and Socket: Formed specular Alzak® reflector panels securedto a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),or two single-ended twin tube sockets (13W Fluorescent).

Lens: Clear flat B" thick tempered glass retained by two stainless steelbrackets, and four stainless steel, hex socket cap screws, fully gasketed.

Ballast: Factory mounted to rigid harness suspended from fixture headwithin the shaft. Wire leads supplied to base. HID: High power factor withstarting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting. 26W, 32W, 42W Fluorescent: High power factor with startingtemperature of 0°F. LED: A total of 9 LED emitters configured in arectangular array comprised together as a module. Two (2) modulesfor 30 watt version; and four (4) modules for 60 watt version.Available in “Halogen White” (approx. 3500K). Emitters are directlyattached to the electronic driver.LED Driver: Constant current electronic driver. Rated for 30 watt, or 60 watt. Available in 120 volt or 277 volt input.0°F. starting temperature. All drivers are Underwriters Laboratoriesrecognized. 120V versions are dimmable.

Anchor Bolts: Four C"x 10"+2" zinc plated L-hooks complete withleveling nuts, washers, couplings, rigid pressed board template andblack stainless steel bolts.



KIM LIGHTING 9

SL1

Ordering Information Site Lightforms

1Two lamps re uired per fixture.242PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).


50PMH120 70PMH120 50HPS120 70HPS12050PMH277 70PMH277 50HPS277 70HPS277

60INC120 13PL1201 42PL1202 30LED120 60LED12013PL2771 42PL2082 30LED277 60LED277

42PL2402

42PL2772


50 PMH 277


SL1 / 50PMH277 / WH1 2 3


Ordering Example:

1 Fixture:Cat. No. designates SL fixture.



INC = Incandescent




Cat. No.: SL1










50 KIM LIGHTING

SL2


8" (203.2 mm)

21" (533.4 mm)

42"*(1066.8 mm)

4K" (114.3 mm)


BASE PLAN SL2

*36" OVERALL HEIGHTAVAILABLE - CONTACT KIM REPRESENTATIVE

8" (203.2 mm)


9D" (244.5 mm)

37K" (952.5 mm)

LIGHT CENTER HEIGHT


3B" (79.4 mm)




Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wallthickness with external reveals to unify head and shaft. Attachment toshaft is by four bolts concealed within the head.



Reflector and Socket: (Typical of two) Formed specular Alzak® reflectorpanels secured to a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent), or two single-ended twin tube sockets (13W Fluorescent).



Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete withleveling nuts, washers, couplings, rigid pressed board template andblack stainless steel bolts.



KIM LIGHTING 51

SL2


1Two lamps re uired per fixture.2Four lamps re uired per fixture.342PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).


50PMH1201 70PMH1201 50HPS1201 70HPS1201

50PMH2771 70PMH2771 50HPS2771 70HPS2771

60INC1201 13PL1202 42PL1201,3 60LED120 120LED12013PL2772 42PL2081,3 60LED277 120LED277

42PL2401,3

42PL2771,3


50 PMH 277


SL2 / 50PMH277 / WH1 2 3


Ordering Example:




INC = Incandescent



Cat. No.: SL2










52 KIM LIGHTING

SL3


8" (203.2.mm)

8E" (225.4 mm) 3B"

(79.4 mm)

42L"*(1085.9 mm)

5J" (133.4 mm)


BASE PLAN SL3

*36L" OVERALL HEIGHT AVAILABLE - CONTACT KIM REPRESENTATIVE

8" (203.2.mm)


9D" (244.5 mm)

37K" (952.5 mm)

LIGHT CENTER HEIGHT





Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wallthickness with external reveal unifying head and shaft. Attachment to shaftis by four bolts concealed within the head.



Reflector and Socket: Formed specular Alzak® reflector panels securedto a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),or two single-ended twin tube sockets (13W Fluorescent).






KIM LIGHTING 53

SL3






42PL2402

42PL2772


50 PMH 277


SL3 / 50PMH277 / WH1 2 3


Ordering Example:




INC = Incandescent




Cat. No.: SL3










54 KIM LIGHTING

SL4


(1085.9 mm)

8" (203.2 mm)

21" (533.4 mm)

42L"*

5J" (133.4 mm)


BASE PLAN SL4

*36L" OVERALL HEIGHT AVAILABLE - CONTACT KIM REPRESENTATIVE

8" (203.2 mm)


9D" (244.5 mm)

37K" (952.5 mm)

LIGHT CENTER HEIGHT


3B" (79.4 mm)




Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wallthickness with external reveals to unify head and shaft. Attachment toshaft is by four bolts concealed within the head.



Reflector and Socket: (Typical of two) Formed specular Alzak® reflectorpanels secured to a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent), or two single-ended twin tube sockets (13W Fluorescent).






KIM LIGHTING 55

SL4


1Two lamps re uired per fixture.2Four lamps re uired per fixture.342PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).


50PMH1201 70PMH1201 50HPS1201 70HPS1201

50PMH2771 70PMH2771 50HPS2771 70PHS2771

60INC1201 13PL1202 42PL1201,3 60LED120 120LED12013PL2772 42PL2081,3 60LED277 120LED277

42PL2401,3

42PL2771,3


50 PMH 277


SL4 / 50PMH277 / WH1 2 3


Ordering Example:




INC = Incandescent




Cat. No.: SL4










56 KIM LIGHTING

SL5


8" (203.2 mm)

42"*(1066.8 mm)

9" (228.6 mm)


BASE PLAN SL5


8" (203.2 mm)


9D" (244.5 mm)


33" (838.2 mm)

LIGHT CENTER HEIGHT

4J" (108.0 mm)

4J" (108.0 mm)



Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wallthickness, attached to shaft by four bolts concealed within the head, fullygasketed.

Shaft: One-piece extruded aluminum with internal tracks for baseattachment. Cast aluminum top cap internally secured and fully gasketed.


Reflector and Socket: Formed specular Alzak® reflector panel securedto a harness which holds a porcelain medium base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),or GX23-2 socket (13W Fluorescent).

Lens: Clear flat F" thick polycarbonate retained by three captivepressure-limiting allen head shoulder screws, fully gasketed.





KIM LIGHTING 57

SL5


142PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).




42PL2401

42PL2771


50 PMH 277


SL5 / 50PMH277 / WH1 2 3


Ordering Example:




INC = Incandescent




Cat. No.: SL5










58 KIM LIGHTING

SL6


8" (203.2 mm)

42"*(1066.8 mm)

9" (228.6 mm)


BASE PLAN SL6


8" (203.2 mm)


9D" (244.5 mm)


33" (838.2 mm)

LIGHT CENTER HEIGHT

4L" (120.7 mm)

4L" (120.7 mm)

3B" (79.4 mm)



Head: (Typical of two) One-piece cast, low-copper (<0.6% Cu)aluminum, F" wall thickness attached to shaft by four bolts concealedwithin each head, fully gasketed.Shaft: One-piece extruded aluminum with internal tracks for baseattachment. Cast aluminum top cap internally secured and fully gasketed.Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured toshaft by four concealed stainless steel bolts.Reflector and Socket: Formed specular Alzak® reflector panels securedto a harness which holds a porcelain medium base 4KV socket (HID andIncandescent), GX24q-4 - Universal Socket (42W Fluorescent), or twosingle ended twin tube sockets (13W Fluorescent).Lens: (Typical of two) Clear flat F" thick polycarbonate retained by threecaptive pressure-limiting allen head shoulder screws, fully gasketed.Ballast: Factory mounted to rigid harness suspended from fixture headwithin the shaft. Wire leads supplied to base. HID: High power factor withstarting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting. 26W, 32W, 42W Fluorescent: High power factor with startingtemperature of 0°F. LED: A total of 9 LED emitters configured in arectangular array comprised together as a module. Two (2) modulesfor 30 watt version; and four (4) modules for 60 watt version.Available in “Halogen White” (approx. 3500K). Emitters are directlyattached to the electronic driver.LED Driver: Constant current electronic driver. Rated for 30 watt, or 60 watt. Available in 120 volt or 277 volt input.0°F. starting temperature. All drivers are Underwriters Laboratoriesrecognized. 120V versions are dimmable.

Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete withleveling nuts, washers, couplings, rigid pressed board template andblack stainless steel bolts.Finish/Color: Finish is Super TGIC thermoset polyester powder coatpaint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,Platinum Silver, or White. Custom colors are available.


KIM LIGHTING 59

SL6






42PL2402

42PL2772


50 PMH 277


SL6 / 50PMH277 / WH1 2 3


Ordering Example:




INC = Incandescent




Cat. No.: SL6










60 KIM LIGHTING

CB

Compact Bollards Photometrics

CB24 LuminaireWattage Lamp Initial Lumens

A 100W. INC. A21 I.F. Medium Base 1690B 13W. PL GX23 Base 900C 42W. PL G24D-3 Base 3200D 50W. PMH ED-17 Medium Base, Coated 2688E 50W. HPS ED-17 Medium Base, Coated 3800

Typical QuadrantInitial HorizontalFootcandles for24" Bollard(20.4" Light Center)

2'2' 4' 6' 8'

2'2'

4'

6'

CB32 LuminaireWattage Lamp Initial Lumens

A 100W. INC. A21 I.F. Medium Base 1690B 13W. PL GX23 Base 900C 42W. PL G24D-3 Base 3200D 50W. PMH ED-17 Medium Base, Coated 2688E 70W. PMH ED-17 Medium Base, Coated 5400F 50W. HPS ED-17 Medium Base, Coated 3800G 70W. HPS E-17 Medium Base, Coated 5985

Typical QuadrantInitial HorizontalFootcandles for32" Bollard(28.4" Light Center)

A B C D E F G0.12 0.06 0.19 0.24 0.39 0.27 0.43

0.31 0.16 0.51 0.62 0.98 0.69 1.09

1.31 0.66 1.92 2.63 4.18 2.94 4.63

7.75 3.94 9.79 15.60 24.78 17.44 27.46

2'2' 4' 6' 8'

2'2'

4'

6'

A B C D E0.04 0.02 0.07 0.09 0.10

0.12 0.06 0.17 0.25 0.28

0.49 0.25 0.77 0.98 1.10

5.23 2.66 7.59 10.53 11.77

KIM LIGHTING 61

VRB

Photometrics Vandal Resistant Round Bollards

Non-Cutoff Side(Vertical Louvers)

Cutoff Side(Horizontal Louvers)

TYPICAL CANDLEPOWER DISTRIBUTION CURVE FOR 100 WATT MH

0°10° 10°20° 20°30° 30°40° 40°

50°

60°

80°

90°

100°

110°

50°

60°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

7070°70°7070°70° 400400

600600

800800

400

600

800

200200200

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'


0°10° 10°20° 20°30° 30°40° 40°

50°

60°

80°

90°

100°

110°

50°

60°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

7070°70°7070°70°

200200

400400

600600

800800

200

400

600

Cutoff SideCutoff SideCutoff Side Non-Cutoff SideNon-Cutoff SideNon-Cutoff Side

800

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'Non-Cutoff Side

Cutoff Side

VRB1 and VRB3 Single Function LuminaireWattage Lamp Initial Lumens

A 70W. HPS E-17 Medium Base, Coated 5985 B 100W. HPS E-17 Medium Base, Coated 8800C 70W. PMH ED-17 Medium Base, Coated 5400 D 100W. PMH ED-17 Medium Base, Coated 8000E 100W. INC. A21 I.F. Medium Base 1690F 42W. PL G24D-3 Base 3200Black and Dark Bronze colors will produce less louver brightness and illumination levelsthan Light Gray or White.

Typical HalfInitial HorizontalFootcandles for42" Bollard(36" Light Center)

VRB2 and VRB4 Dual Function LuminaireWattage Lamp Initial Lumens


Typical HalfInitial HorizontalFootcandles for42K" Bollard(37K" Light Center)

A B C D E F

2.1 3.2 2.4 3.5 .47 1.13

3.8 6.8 4.5 6.6 1.2 2.13

1.4 2.2 1.6 2.3 .37 .76

.51 .81 .61 .90 .12 .29

.23 .39 .27 .40 .06 .13

.12 .20 .13 .20 .04 .07

.07 .12 .07 .11 .02 .03

A B C D E F

2.1 3.2 2.4 3.5 .47 1.13

3.8 6.8 4.5 6.6 1.2 2.13

1.4 2.2 1.6 2.3 .37 .76

.51 .81 .61 .90 .12 .29

.23 .39 .27 .40 .06 .13

.12 .20 .13 .20 .04 .07

.07 .12 .07 .11 .02 .03

NOTE: All photometric tests wereconducted using white fixtures withcoated lamps. Clear High PressureSodium lamps may be used if slightlouver shadows are acceptable.

TYPICAL CANDLEPOWER DISTRIBUTION CURVE FOR 100 WATT PMH


62 KIM LIGHTING

VSB

Vandal Resistant Square Bollards Photometrics

Non-Cutoff Side(Vertical Louvers)

Cutoff Side(Horizontal Louvers)


0°10° 10°20° 20°30° 30°40° 40°

50°

60°

80°

90°

100°

110°

50°

60°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

7070°70°7070°70° 400400

600600

800800

400

600

800

200200200

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'


0°10° 10°20° 20°30° 30°40° 40°

50°

60°

80°

90°

100°

110°

50°

60°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

7070°70°7070°70°

200200

400400

600600

800800

200

400

600

Cutoff SideCutoff SideCutoff Side Non-Cutoff SideNon-Cutoff SideNon-Cutoff Side

800

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'Non-Cutoff Side

Cutoff Side

VSB1 Single Function LuminaireWattage Lamp Initial Lumens

A 70W. HPS E-17 Medium Base, Coated 5860 B 100W. HPS E-17 Medium Base, Coated 8800C 70W. PMH ED-17 Medium Base, Coated 5300 D 100W. PMH ED-17 Medium Base, Coated 8500E 100W. INC. A21 I.F. Medium Base 1710F 42W. PL Gx24q-3 Base 3200Black and Dark Bronze colors will produce less louver brightness and illumination levelsthan Light Gray or White.


VSB2 Dual Function LuminaireWattage Lamp Initial Lumens



NOTE: All photometric tests wereconducted using white fixtures withcoated lamps. Coated lamps mustbe used to minimize shadows fromthe luminaire structural supports.

A B C D E F

5.6 8.4 5.1 8.2 1.6 3.6

5.2 7.8 4.7 7.6 1.5 3.7

1.7 2.5 1.6 2.5 .50 1.3

.62 .93 .56 .90 .18 .53

.27 .41 .25 .40 .08 .27

.13 .20 .12 .20 .04 .13

.06 .10 .06 .10 .02 .01

A B C D E F

5.6 8.4 5.1 8.2 1.6 3.6

5.2 7.8 4.7 7.6 1.5 3.7

1.7 2.5 1.6 2.5 .50 1.3

.62 .93 .56 .90 .18 .53

.27 .41 .25 .40 .08 .27

.13 .20 .12 .20 .04 .13

.06 .10 .06 .10 .02 .01



KIM LIGHTING 63

GEM™

Photometrics HID


0°10° 10°20° 20°30° 30°40° 40°

50°

80°

90°

100°

110°

50°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

70°

60°

70°

60°

70°

60°

70°

60°900900

12001200

300300

600600

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'


HOUSE SIDEPATH SIDE0°10° 10°20° 20°30° 30°40° 40°

50°

80°

90°

100°

110°

50°

60°

70°

80°

90°

100°

110°

120° 120°130° 130°140° 140°150° 150°170° 170°160° 160°

70°

60°

70°

60° 900900

12001200

300300

600600

0' 3' 6' 9' 12' 15' 18' 21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'

GEM1 LuminaireWattage Lamp Initial Lumens

A 70W. HPS E-17 Medium Base, Clear 6300 B 100W. HPS E-17 Medium Base, Clear 9500C 70W. PMH ED-17 Medium Base, Clear 6200D 100W. PMH ED-17 Medium Base, Clear 9000


A B C D

15.7 23.6 13.4 24.9

6.4 9.6 5.4 10.1

1.9 2.9 1.7 3.1

0.6 0.9 0.5 1.0

0.2 0.4 0.2 0.3

0.1 0.2 0.1 0.2

GEM1 Luminaire with Houseside ShieldWattage Lamp Initial Lumens

A 70W. HPS E-17 Medium Base, Clear 6300 B 100W. HPS E-17 Medium Base, Clear 9500C 70W. PMH ED-17 Medium Base, Clear 6200D 100W. PMH ED-17 Medium Base, Clear 9000


A B C D

6.7 10.2 5.8 10.7

2.1 3.1 1.8 3.2

0.7 1.0 0.6 1.0

0.3 0.4 0.2 0.4

0.1 0.2 0.1 0.2



64 KIM LIGHTING

GEM™

GEM Performance Bollard Photometrics

4.31.40.40.20.1

1.40.40.20.1

50

5050

100

100100150

150150200 200200

6060° 6060°

0°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°5050

100100150150

2002006060° 6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°5050

100100150150

2002006060° 6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°

50

50

100

100150

150200 200

60° 60°

120° 150°150° 120°

90°

30° 30°

90°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°

0'15'18'21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'

3'6'9'12'

50

50

100

100150

150200 200

60° 60°

0°

120° 150°150° 120°

90°

30° 30°

90°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°

0'15'18'21'

0'

3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'

3'6'9'12'

50

5050

100

100100150

150150200 200200

6060° 6060°

0°0°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°5050

100100150150

2002006060° 6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°5050

100100150150

2002006060° 6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°50

100150

20060° 60°

120° 150°150° 120°

90°

30° 30°

90°

GEM1 LuminaireWattage Lamp Initial Lumens32W. PL GX24q-3 Base 2400

GEM1 Luminaire with Houseside ShieldWattage Lamp Initial Lumens32W. PL GX24q-3 Base 2400



TYPICALCANDLEPOWERDISTRIBUTIONCURVE FOR 32 WATT PL

TYPICALCANDLEPOWERDISTRIBUTIONCURVE FOR 32 WATT PL

GEM1 Luminaire with LED Module

1.02.01.00.50.20.1

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

30°

43438686

129129

4386

12960° 60°

120° 150°150° 120°

90°

30°

90°

0°

0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'

.

Typical Halffor 30 Watt LEDInitial HorizontalFootcandles for42K" Bollard(37K" Light Center)

TYPICALCANDLEPOWERDISTRIBUTIONCURVE FOR 30 WATT LED

2.05.02.01.00.50.20.1

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

30°

8282164164

246246

82164

24660° 60°

120° 150°150° 120°

90°

30°

90°

0°

0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'



2.0

5.02.01.00.50.20.1

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

30°

8686172172

258258

86172

25860° 60°

120° 150°150° 120°

90°

30°

90°

0°

0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'



KIM LIGHTING 65

BNB / LE

Photometrics Bounce® Bollard / Era® Lantern Bollard

BNB & LE Luminaires w/ Houseside Shield

60° 60°

0°

9601280

320640

60°

120° 120°

90° 90°

30° 30°

150° 150°

0'3'6' 3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

3'

6'

3'

6'

0'

9'

9'

12'

15'

18'

21'

0°

600800

200400

30° 30°

60° 60°

90° 90°

120° 120°150° 150°

0'3'6'9'12'15'18'21'

0'

3'3'

6'

9'

12'

15'

18'

21'

3'

6'

9'

12'

15'

18'

21'

House Side

Path Side

PATH SIDE HOUSE SIDE0°0°0°

600600600800800800

200200200400400400

30°30° 30°30°

60°60° 60°60°

90°90° 90°90°

120°120° 120°120°150°150° 150°150°

30° 30°

60° 60°

90° 90°

120° 120°150° 150°

3'

A 70W PMH, ED-17 Med. Base, Coated, 5300 initial lumensB 100W PMH, ED-17 Med. Base, Coated, 8500 initial lumensC 70W HPS, ED-17 Med. Base, Coated, 5860 initial lumensD 100W HPS, ED-17 Med. Base, Coated, 8800 initial lumensE 42W PL-T, GX24q-4 Base, 3200 initial lumens

Typical HalfInitial Horizontal Footcandles for 42K" Bollard (39F" Light Center)

Typical HalfInitial HorizontalFootcandles for42K" Bollard (39F" Light Center)

A B C D E17.1 27.4 18.9 28.4 8.14

3.45 5.53 3.81 5.73 2.920.62 0.99 0.68 1.02 0.68

0.13 0.21 0.15 0.22 0.17

0.04 0.06 0.05 0.07 0.050.02 0.03 0.02 0.03 0.02

0.01 0.01 0.01 0.01 0.01

60°60°60° 60°60°

0°0°0°

96096012801280

320320640640

9601280

320640

60°

120°120° 120°120°

90°90° 90°90°

30°30° 30°30°

150°150° 150°150°

60°

120° 120°

90° 90°

30° 30°

150° 150°

0'

9'

9'

A B C D E21.3 34.2 23.6 35.4 12.0

3.82 6.13 4.23 6.34 2.88

0.80 1.29 0.89 1.34 0.70

0.21 0.34 0.24 0.35 0.20

0.08 0.12 0.09 0.13 0.07

0.03 0.06 0.04 0.06 0.03

0.02 0.03 0.02 0.03 0.02

TYPICALCANDLEPOWERDISTRIBUTIONCURVE FOR 100 WATT PMH

TYPICALCANDLEPOWERDISTRIBUTIONCURVE FOR 100 WATT PMH

A 70W PMH, ED-17 Med. Base, Coated, 5300 initial lumensB 100W PMH, ED-17 Med. Base, Coated, 8500 initial lumensC 70W HPS, ED-17 Med. Base, Coated, 5860 initial lumensD 100W HPS, ED-17 Med. Base, Coated, 8800 initial lumensE 42W PL-T, GX24q-4 Base, 3200 initial lumens

BNB & LE Luminaires

03'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'

PATH SIDE0°0°

25255050

7575100100

HOUSE SIDE

120°120° 120°120°

90°90° 90°90°

60°60° 60°60°

30°30° 30°30°

150°150° 150°150°

0°

2550

75100

120° 120°

90° 90°

60° 60°

30° 30°

150° 150°

BNB & LE Luminaires with LED Module


1.002.002.001.0000.500.200.10.050.020.01

Typical Half for 30 Watt LEDInitial Horizontal Footcandles for42K" Bollard (39F" Light Center)

Typical Halffor 45 Watt LEDInitial HorizontalFootcandles for42K" Bollard(39F" Light Center)


0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'

0°PATH SIDE

0°0°

5050100100

150150

200200

HOUSE SIDE

60°60°

90°90°

120°120° 150°150°

30°30°

60°60°

90°90°

120°120°150°150°

30°30°0°

50100

150

20060°

90°

120° 150°

30°

60°

90°

120°150°

30°

5.005.00

1.000.500.200.100.05

0.02

0.01

2.00

Typical Halffor 60 Watt LEDInitial HorizontalFootcandles for42K" Bollard(39F" Light Center)


0'9'12'15'18'21'

12'

15'

18'

21'

9'

9'

12'

15'

18'

21'

6' 3'6' 3'

3'

3'

6'

6'

0'

3'

3'

6'

6'

0'

0°0°PATH SIDE

100100200200

300300400400

100200

300400

HOUSE SIDE30°30° 30°30°

60°60° 60°60°

90°90° 90°90°

120°120° 120°120°150°150° 150°150°

0°

100200

300400

30° 30°

60° 60°

90° 90°

120° 120°150° 150°

10.05.002.001.000.500.200.100.05

0.02

IES Type1 IES Type3 IES Type5

66 KIM LIGHTING

B30

High Performance Bollard Photometrics

Candela Diagrams

A B C D E

4.2 12 17 8.5 14

1.4 4.7 6.5 2.8 4.5

.54 1.7 2.3 1.1 1.8

.26 .71 .95 .55 .88

.14 .38 .50 .29 .47

.08 .20 .32 .17 .27

- .11 .16 .10 .16

- .07 .10 .06 .10

NOTE: The multiplication factor for correction of footcandles andcandlepower with optional clear Polycarbonate Enclosure: 0.92B30 Luminaire

Wattage Lamp Initial LumensA 42W. PL GX24q-3 Base 2400 B 70W. HPS E-23K Mogul Base, Coated 5985C 100W. HPS E-23K Mogul Base, Coated 8800 D 70W. PMH ED-17 Medium Base, Coated 5000E 100W. PMH ED-17 Medium Base, Coated 8000

9' 12' 15' 18' 21'

9'

12'

15'

18'

21'

6'6'3'3' 6'0'0'0'

3'3'

6'6'

3'

0'0'0'

6'

3'

75150

225300

100200

300400

100300

500700

200400

600

100200

300400

100300

500200

400600

10° 20° 30° 40° 50° 60°

70°

80°

90°

10° 20° 30° 40° 50° 60°

70°

80°

90°

10° 20° 30° 40° 50° 60°

70°

80°

90°

10° 20° 30° 40° 50° 60°

70°

80°

90°

10° 20° 30° 40° 50° 60°

70°

80°

90°

32W. Compact Fluorescent 70W. High Pressure Sodium, Coated 100W. High Pressure Sodium, Coated

70W. Metal Halide, Coated 100W. Metal Halide, Coated

6'3'0'

3'

6'

0'

7575150150

225225300300

150225

300

100100200200

300300400400

75 200300

400

100100300300

500500700700

200200400400

600600100

100100200200

300300400400

200300

400

100300

500700

200400

600

100100300300

500500200200

400400600600

100300

500200

400600

100

42W. Compact Fluorescent

KIM LIGHTING 67

A B C D E F G

19 40 15 30 9 16 4.511 20 8.3 16 5 8.8 2.57.5 10 4.7 9 2.5 4.4 1.52.7 4 1.8 3.5 .90 1.6 .451.3 2 .93 1.8 .40 .72 .25.55 1 .41 .80 .20 .36 .12.25 .40 .18 .35 10 .19 .05.12 .20 .08 .16 .05 .08 .02.06 .10 .04 .07 .02 .04 .01

SL1 / SL3 LuminairesWattage Lamp1 Initial Lumens

A 50W. HPS ED17 Medium Base, Coated 3800B 70W. HPS ED17 Medium Base, Coated 5985C 50W. PMH ED17 Medium Base, Coated 2688D 70W. PMH ED17 Medium Base, Coated 5184E (2) 13W. PL GX23 Base 900 eachF 42W. PL GX24q-3 Base 3200G 60W. INC. T10 I.F. Medium Base 745

Typical HalfInitial HorizontalFootcandles for42" Fixture(37K" Light Center)

0'

3'

6'

9'

12'

15'

3'

6'

0' 3' 6' 9' 12' 15' 18'

SL2 / SL4 LuminairesWattage Lamp1 Initial Lumens

A (2) 50W. HPS ED17 Medium Base, Coated 3800 eachB (2) 70W. HPS ED17 Medium Base, Coated 5985 eachC (2) 50W. PMH ED17 Medium Base, Coated 2688 eachD (2) 70W. PMH ED17 Medium Base, Coated 5184 eachE (4) 13W. PL GX23 Base 900 eachF (2) 42W. PL GX24q-3 Base 3200 eachG (2) 60W. INC. T10 I.F. Medium Base 745 each

Typical QuadrantInitial HorizontalFootcandles for42L" Fixture(37K" Light Center)

A B C D E F G

50 100 31 60 25 43.9 1530 40 18 35 10 17.9 517 25 10 20 5 8.8 38 15 5.2 10 3.5 6.3 1.84 7 2.6 5 1.5 2.7 .752 3.5 1.6 3 .75 1.3 .501 2 .78 1.5 .38 .68 .30

.45 .80 .26 .50 .18 .32 .10

.20 .35 .15 .28 .08 .15 .05.12 .20 .08 .15 .05 .08 .03

0'

3'

6'

9'

12'

15'

0' 3' 6' 9' 12' 15' 18'

SL

Photometrics Site Lightforms®1NOTE:Coated lamps recommended.

SL1 SL3

SL2 SL4

SL

Site Lightforms® Photometrics

68 KIM LIGHTING

1NOTE:Coated lamps recommended.

A B C D E F G

12 20 11 18 4 14.9 77 11 6.3 10 2 7.4 3.5

3.8 6 3.8 6 .75 2.8 1.81.5 3 1.8 2.8 .35 1.3 .70.75 1.2 .88 1.4 .15 .56 .38.35 .70 .34 .54 .07 .27 .18

.15 .25 .19 .30 .03 .11 .07

.07 .12 .09 .15 .01 .04 .02

.03 .05 .03 .05 .01 .04 .01

SL5 Luminaire SL6 LuminaireInitial

Wattage Lamp1 LumensA 50W. HPS ED17 Medium Base, Coated 3800B 70W. HPS ED17 Medium Base, Coated 5985C 50W. PMH ED17 Medium Base, Coated 3400D 70W. PMH ED17 Medium Base, Coated 5400E (2) 13W. PL GX23 Base 900 eachF 42W. PL GX24q-3 Base 3200G 100W. INC. A19 I.F. Medium Base 1750

InitialWattage Lamp1 Lumens

A 50W. HPS ED17 Medium Base, Coated 3800B 70W. HPS ED17 Medium Base, Coated 5985C 50W. PMH ED17 Medium Base, Coated 3400D 70W. PMH ED17 Medium Base, Coated 5400E 13W. PL GX23 Base 900F 42W. PL GX24q-3 Base 3200G 100W. INC. A19 I.F. Medium Base 1750

Typical HalfInitial Horizontal Footcandles for 42" Fixture (33" Light Center)

0'

3'

6'

9'

12'

15'

3'

6'

6' 9' 12' 15' 18'3'3'0'0'0' 3'

A B C D E F G

6 10 4.4 7 2 7.4 22.5 4 2.2 3.5 .75 2.8 1.21.5 2 1.1 1.8 .50 1.9 .70.65 1 .57 .90 .28 1 .38

.30 .42 .25 .40 .14 .59 .15.15 .20 .12 .19 .08 .29 .07.07 .10 .06 .09 .04 .15 .03

Typical QuadrantInitial Horizontal Footcandles for 42" Fixture (33" Light Center)

0'

3'

6'

9'

12'

15'

0' 3' 6' 9' 12' 15' 18'

SL5 Luminaire with LED Module

10.05.02.01.00.50.20.1

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

30°

100100200200

300300

100200

30060° 60°

120° 150°150° 120°

90°

30°

90°

0°0°

0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'

Typical Halffor 30 Watt LEDInitial HorizontalFootcandles for42" Fixture(33" Light Center)


20.010.05.02.01.00.50.20.1

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

12020° 15050°15050° 12020°

9090°

3030° 3030°

9090°

6060°

30°

240240480480

720720

240480

72060° 60°

120° 150°150° 120°

90°

30°

90°

0°0°

0'3'6'9'12'15'18'21'

3'

6'

12'

15'

18'

21'

3'

6'

0'

9'

9'

12'

15'

18'

21'

212

100

Typical Halffor 60 Watt LEDInitial HorizontalFootcandles for42" Fixture(33" Light Center)


Lamp

50PMH 120 0.63 1.16 0.87 1.16ED-17 Coated 50 M98 15000 3500 208 0.40 0.67 0.51 0.67Medium Base 240 0.35 0.57 0.47 0.57

277 0.33 0.50 0.32 0.50347 0.24 0.48 0.21 0.48


277 0.35 0.80 0.25 0.80347 0.28 0.65 0.20 0.65

70PMH 120 0.80 1.90 0.55 1.90ED-17 Clear 70 M98 15000 6000 208 0.46 1.00 0.30 1.00Medium Base 240 0.40 0.90 0.25 0.90

277 0.35 0.80 0.25 0.80347 0.28 0.65 0.20 0.65


277 0.50 1.00 0.60 1.00347 0.40 1.00 0.40 1.00

100PMH 120 1.15 2.30 1.20 2.30ED-17 Clear 100 M90 15000 9000 208 0.66 1.40 0.80 1.40Medium Base 240 0.58 1.15 0.65 1.15

277 0.50 1.00 0.60 1.00347 0.40 1.00 0.40 1.00

50HPS 120 0.55 1.24 0.58 1.24ED-17 Coated 50 S68 24000 3800 208 0.33 0.60 0.35 0.60Medium Base 240 0.30 0.52 0.31 0.52

277 0.26 0.45 0.25 0.4570HPS 120 0.81 1.45 0.75 1.45

ED-17 Coated 70 S62 24000 5860 208 0.47 0.85 0.45 0.85Medium Base 240 0.40 0.75 0.37 0.75

277 0.35 0.65 0.35 0.65347 0.30 0.55 0.30 0.55

70HPS 120 0.81 1.45 0.75 1.45ED-17 Clear 70 S62 24000 6300 208 0.47 0.85 0.45 0.85Medium Base 240 0.40 0.75 0.37 0.75

277 0.35 0.65 0.35 0.65347 0.30 0.55 0.30 0.55

100HPS 120 1.15 2.20 1.30 2.20ED-17 Coated 100 S54 24000 8800 208 0.67 1.25 0.75 1.25Medium Base 240 0.58 1.10 0.65 1.10

277 0.50 0.85 0.60 0.85347 0.39 0.70 0.45 0.70

100HPS 120 1.15 2.20 1.30 2.20ED-17 Clear 100 S54 24000 9500 208 0.67 1.25 0.75 1.25Medium Base 240 0.58 1.10 0.65 1.10

277 0.50 0.85 0.60 0.85347 0.39 0.70 0.45 0.70

13PL Coated 120 – – – 0.30GX23-2 Base 13 – 10000 860 277 – – – 0.13

32PL 120 – – – 0.31Coated 32 – 10000 2400 208 – – – 0.18GX24q-3 Base 240 – – – 0.15

277 – – – 0.1342PL 120 – – – 0.41

Coated 42 – 10000 3200 208 – – – 0.24GX24q-4 Base 240 – – – 0.20

277 – – – 0.18

30LED LED 120 – – 0.25 –30 – 50000+ 1200 277 – – 0.11 –

45LED LED 120 – – 0.38 –45 – 50000+ 1800 277 – – 0.16 –

60LED LED 120 – – 0.50 –60 – 50000+ 2400 277 – – 0.22 –

KIM LIGHTING 69

Lamp and Electrical Guide

1All initial lumen values shown may vary, from one manufacturer to another. Consult lamp manufacturer’s data for exact lumen and life data.NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.WARNING: All fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in seriouspersonal injury.Lamps by others.

Lam

pW

atts

AN

SIB

alla

stTy

pe

Life

(Hou

rs)

Initi

alLu

men

s1

Volta

ge

Oper

atin

gA

mps

.

Ope

nC

ircui

t

Star

ting

Am

ps.

Max

.A

mps

.

PULSE START METAL HALIDE

HIGH PRESSURE SODIUM

COMPACT FLUORESCENT

LED – 75CRI, 3500K

for pathways / courtyards / entrances · external vertical grooves align with vertical members on...

Documents