for engineering applications · mems (micro-electromechanical systems) is a technology that...
TRANSCRIPT
MEMS (Micro-Electromechanical Systems) is a technology that integrated the mechanical elements, sensor, actuators, and
electronic on a common miniature substrates through micro fabrication technology. There are numerous current possible
applications of MEMS technologies, including:Mechanical, Aerospace, Electrical and Electronic, as well as
Chemical and Biomedical Engineering fields. However, due to the manufacturing requirements and cost
consideration on design and manufacturing, it pushedseveral limits further MEMS
applications.
Date :12 May 2014 (Monday)
Venue :Faculty of Bioscience and
Medical Engineering, (FBME)
UTM Johor Bahru.
FOR ENGINEERING APPLICATIONS
MEMS DEVICES:DESIGN ANDFABRICATION
ONE DAY HANDS-ON WORKSHOP ON
The recent development on textile-based MEMS technique opens more potential design and
manufacturing of a low cost MEMS device. This textile based MEMS concept has been successfully ACCEPTED
in the electronics and lab-on-a-chip societies. The objective of this workshop is to share and assist researchers and
engineers in the fields of microsystems, mechanical and electrical engineering, chemical and biomedical fields on how to design and
fabricating a low-cost MEMS system. Participants will be able to manufacture a simple MEMS device for their own future research and
academic purposes.
Medical Devices andTechnology Group (MediTeg), FBME UTM
Organizers:
FBME UTM
Dr. Dedy Hermawan Bagus Wicaksono,FBME Universiti Teknologi Malaysia, Johor Bahru.
Professor Toshiro Ohashi, Hokkaido University, Japan
Who should attend?Lecturers and TutorsRO/RA and techniciansBachelor and Postgraduate studentsIndustry
Course Contents:MEMS: current status and future applicationsLow Cost Textile-based MEMS devicesTextile-based MEMS technologyMEMS for engineering devices
Design and fabrication MEMS systemTesting and calibrationData collecting and errors
Facilitators
Toshiro Ohashi received B.Sc. from Tsukuba University in Japan in 1991, M.Sc. from Tsukuba University in 1994. He joined Tohoku University in Japan in 1994, serving as Research Associate from 1994 to 2002 and as Associate Professor from 2002 to 2009. During this period of time, he received Ph.D. from Tohoku University in 2000. He spent 1-year at Queen Mary University of London in the UK from 2004 to 2005 and spent 7-month at Royal Institute of Technology in Sweden in 2008 as Academic Fellow. Since 2009, he has been Full Professor at Hokkaido University in Japan. He was also appointed as Visiting Professor at Kyushu University in Japan in 2010 and as Visiting Lecturer at Kyoto University in Japan from 2012 to 2013. His main research areas involve cell/tissue biomechanics and bio-MEMS. He has published 67 peer reviewed scientific papers and has been honored with 11 national and international awards. His editorial appointments include Editor-in-Chief of Journal of Biorheology, Associate Editor of Journal of Biomechanical Science and Engineering and Editorial Board Member of Bio-Medical Materials and Engineering.
Dedy H.B. Wicaksono is a Senior Lecturer at the Department of Clinical Sciences, Faculty of Biosciences and Medical Engineering, FBME Universiti Teknologi Malaysia, Johor Bahru, Malaysia. He is also a full time researcher at Medical Devices and Technology (MEDITEG) Research Group and associate researcher at IJN-UTM Cardiovascular Engineering Centre (CEC UTM). He holds his Ph.D. degree in 2008 from Delft University of Technology (Delft, the Netherlands) on bio-inspired MEMS. From 2008 to 2010, he was a postdoctoral researcher at TU Delft, and was working on micro-optics integration to dental drill bit. Currently, his research focus is in biomaterials, textile-based biomedical devices, and fundamental sensing theory and mechanism. He has published numerous technical papers in conference proceedings and journals in the last 11 years of his research and teaching career, including in Lab-on-a-Chip, Analyst, J. Micromech and Microengineering and Biosensors and Bioelectronics. To date he has been involved in internally and externally funded research projects on MEMS and Biomedical Engineering. He has received more than 20 International and National awards from his inventions in the field of textile-based MEMS and Microfluidics.
For registration and inquiries:
Nor RafidahKhalid (UTMSpace) Tel : 07 521 5166 /07 521 8164 | H/P: +60 137934783
Dr Irza SukmanaTel : 07 55 58502 (Ext. 58502) | H/P: +60 167 209496
All crossed cheque / bank draft should be made payable to Account Name : UTMSPACEAccount Number : 8601518228 | Bank Name : CIMB ISLAMIC Bank Berhad | Branch : UTM Skudai, Johor
Authorised Signature* : Date :
Name : Designation :
Company’s Stamp
Organisation :
Co. Reg. No.* :
Address :
Contact Person :
Tel. No : Designation :
Fax No. : E-mail :
No. Name of Participant & E-mail Mobile No. NRIC (for HRDF claim) Fee (RM)
(Please attach a separate list if necessary)
For further information, please contact:
PROFESSIONAL DEVELOPMENT UNITSchool of Professional and Continuing Education
(UTMSPACE) Universiti Teknologi MalaysiaNo. 34-50, Jalan Kebudayaan 1, Taman Universiti
81300 Skudai, Johor Bahru, Johor : 07-5215166 / 8164 : 07-5211355 : www.utmspace.edu.my : [email protected] : NorRafidahKhalid Person
REGISTRATION FORM To confirm your registration, please complete this form including payment.YES! Please register the following participant(s) for this course
I am interested but unable to attend. Please put me on your mailing list
COURSE DETAILS
* Includes refreshment, lunch, course material and Certificate of Attendance.
Note: Participants have to bring their own Lab coat.
DETAILS OF THE PARTICIPANT ATTENDING THE COURSE
Sponsorship : Self-Sponsored Company-Sponsored
INDIVIDUAL / COMPANY DETAILS
Cancellations received in writing 30 days prior to the programme are eligible for a refund, subject to a 15% cancellation fee. Cancellations received less than 14 days from the date of the programme are not eligible for a refund. However, substitute attendees are welcome.
Please note that the speakers and topics are confirmed at the time of printing. However, circumstances beyond the control of organisers may necessitate substitutions or cancellations of speakers and/or topics. As such UTMSPACE reserves the right to alter or modify the advertised speakers and/or topics.
*Head of Department / Approving Manager
*if applicable
MODE OF PAYMENT
A. Cheque or Bank DraftCheque No. /Bank Draft No. :
Bank / Branch :
B. Telegraphic Transfer / Local OrderTransaction Date : Reference No. :
| Terms & Conditions Apply |
12 May 2014Bio-Inspired Medical Devices Lab and Material Preparation LabBlock V01, Wing B Level 4, FBME UTM, Johor Bahru.
MEMS DEVICES: DESIGN AND FABRICATION FOR ENGINEERING APPLICATIONS
Course Name :
Fee :
Date :Venue :
Please tick ( ) where applicable
Bachelor Students (limited seat): RM 200
Post Graduate students : RM 300
Lecturer/ RA/ RO : RM 500
Industry : RM 1000
RM100discountfor UTMStaff &
Studentswith ID