folding stock unjam trouble shooting... · use the front sight adjustment tool. turning clockwise:...
TRANSCRIPT
01
02
01
01
02
0102
0304
05
01
0402
03 0605
0302
04
02
03
01
02
01
02
01
03
04
0506
07
091011
01
01
02
0304 05 06
07
0910
11
12
14
15
16
17
18
01
02
03
04
05
01
02
0304
05
07
06
11
0102
0304
0506
08
10
11
12
07
13
02
03
01
04
02
10
0908
01
02
03
0504
07
06
01
01
02
01
02
0304
01
0402
03 0605
0302
01
02
03
01
02
01
01
15
04
0506
07
08
01
01
02
0304 05 06
07
0910
11
12
14
19
15
16
17
18
01
02
03
04
05
04
12
09
10
11
02
13
02
03
10
0908
01
02
03
0504
01
02
08
1213
14
0808
03 06
04
05
0708
0910
11
01
02
GC300-16GC300-10
GC300-06
GC300-05
GC300-18 GC300-24
GC300-22
GC300-21
GC300-23
GC300-19
GC300-17
GC300-09
GC300-13
GC300-08
GC300-01
GC300-11
GC300-15
GC300-20
GC300-14
GC300-12
GC300-07
GC300-25GC300-04
GC300-03
UNJAMFOLDING STOCK
FRONT SIGHT ADJUSTMENT REAR SIGHT ADJUSTMENT
TROUBLE SHOOTING
Fold the stock to the left side of the gun.
Use the front sight adjustment tool. Turning clockwise: To correct high shots.Turning counterclockwise: To correct low shots.
Remove the magazine. Return the hop up dial to normal position and insert the cleaning rod from the lead edge of the inner barrel.
Be sure to have the rod facing down and reaching to the end to remove clogged pellets.
Use a screwdriver to adjust the screw at the bottom of the grip.
Check the wire set contact on the motor.
Make sure the battery is fully chargedand wires are properly connected.
Unscrew and take the fixing screws off to remove the front sight.
Unscrew and take the fixing screws off to remove the rear sight.
Selector lever is set to safety.Adjust screw when the gearnoise becomes shrilly.
No operation No operation
MOVABLE PARTS
Press the stock base with the thumb and pull up.
Small HoleUsed for precision firing.
Large HoleUsed for full automatic firing.
Windage knob (left / right adjustment)
WindageWindage
PRESS
PULL
DOWN UP
► The grouped parts may all be purchased from the G&G Support Department.
► E-Mail: support@guay2com
Tel : +886-2-2692-2000 Fax : +886-2-2692-400011F-3., No.27, Lane 169, Kangning St. Shijr City, Taipei County 22180, Taiwan (R.O.C.)
Taipei
Tel : +886-4-798-9000 Fax : +886-4-798-9900No.999, Zhonghua Rd. Shengang Township, Changhua County 50955, Taiwan (R.O.C.)
ChangHua
Headquarter
Sales Dept. [email protected] , [email protected] Support Dept. [email protected] Dept. [email protected]
GC300-01
GC300-03
GC300-04
GC300-05
GC300-06
GC300-07
GC300-08
GC300-09
GC300-10
GC300-11
GC300-12
GC300-13
GC300-14
GC300-15
GC300-16
GC300-17
GC300-18
GC300-19
GC300-20
GC300-21
GC300-22
GC300-23
GC300-24
GC300-25
Flash suppressor set
Outer barrel set (Long Type)
Outer barrel set (Short Type)
Inner barrel (Long Type)
Inner barrel (Short Type)
Handguard set
Hop-Up rubber set
Gear box set
Front sight set
Hop-Up set
Rear sight set
Upper receiver set
PARTS LIST
Dealer
G2-201412-03-英
Dust cover set
Lower receiver set
Charging handle
Magazine catch set
Rear receiver lock pin set
Selector lever set
Wire set
Grip bottom plate set
Grip set
Motor set
Magazine
Folding stock set
INSTRUCTION MANUALGC300 S /LGC300 S /L