focal flex power 2120
TRANSCRIPT
FOCAL FLEX POWER 2120 S t e r e o m i x i n g a m p l i f i e r
Applications
Bar, restaurant, hotel, place of worship, meeting room, conference room, classroom, lecture hall, commercial premises, gymnasium, fitness room, swimming-pool, multi-purpose room, multimedia library, waiting room, reception, theme park, private house.
The Focal Flex Power 2120 is an integration stereo mixing amplifier that was made to meet all the “public address” sound system requirements with the guarantee of the Focal sound.Polyvalent, flexible and rackable, low-consumption in full power as well as in standby, easy installation and user-friendly, ultra-robust, the Flex Power 2120 suits any situation, from the simplest configuration to the most sophisticated, thanks to the numerous exclusive functions. Everywhere where the needs in the highest quality sound and perfect intelligibility prevail.
- Stereo power component class D Hypex
Characteristics
- Exceptional Focal sound quality- Only one device for multiple applications- Simplicity and ergonomics- Full stereo mixing inputs 2 x 120 Watts- Exclusive limiter and automatic level control, low saturation risks- Exclusive voice filter system for perfect intelligibility. - 70V/100V and 25V output line- Level control through VCA or 0-10V controller- Two output zones- High efficiency, low energy consumption, silence (no fan)- Extra front auxiliary input
Focal® is a trademark of Focal-JMlab® - www.focal-fr.com - BP 374 - 108, rue de l'Avenir - 42353 La Talaudière cedex - France - Tel (+33) 04 77 43 57 00 - Fax (+33) 04 77 43 57 04- SCAB - 091218/1
6 pin Euroblock driver outputs • Nominal power 2 x 120 Watts RMS
• Bandwidth 40Hz – 30kHz in Max. power (4/8Ω outputs) DHT <0.2%
• Bass/midrange/treble adjustments ± 9dB @ 100Hz / 1kHz / 10kHz
9 pin Euroblock line outputs
Microphone • Sensitivity / Impedance 1mV / 3kΩ
• Signal/noise ratio - 70dB
• Phantom power supply 48V/6.8kΩ
• Permanent voice / Commutable Voice Boost filter - 6dB @ 180Hz and 15kHz / + 5dB @ 3.7kHz
• Voice priority (input 1) Response 50ms / recovery 2.5s
Stereo symmetric / Stereo asymmetric • Impedance 20kΩ / 10kΩ
• Sensitivity 850mV
• Signal/noise ratio - 90dB
Stereo 3.5mm jack front input • Impedance 7.5kΩ ( 1.5kΩ in Boost mode)
• Sensitivity 250mV ( 50mV in Boost mode )
• Signal/noise ratio - 85dB
RCA stereo Amp input • Sensitivity / Impedance 1V (0dBV) / 10kΩ
Symmetrical 6 pin Euroblock Zone 2 output • Output level / Impedance 1.3V (+4dBu) / 680Ω
Stereo RCA Record line output • Output level / Impedance 350mV (-10dBV) / 680Ω
Stereo RCA Pre-Out output • Output level / Impedance 1V (0dBV) / 680Ω
4 pin Euroblock VCA control • Live control 12V built-in output
Compatible with 0 – 10V controller Control through 10kΩ potentiometer
Power supply / Consumption • Local supply voltage 230 / 115V, ± 15%, 50 / 60Hz
• Consumption in max. power 300VA
• Consumption via standby mode < 2 Watts
General • Weight 30.2lb (13.7kg)
• Chassis dimensions (HxLxD) 31/2 x 1613/16 x 137/8 " (89.5 x 427 x 353mm)
• Conformity CEM 89 / 336 / EEC and 73 / 23 / EEC
• Temperature of use -10 to +35°C
• Storage temperature -40 to +70°C
1
2
3 4 5 6 7
1314
12
11
8 9
10
48V
48V
48V
Voice filterTone
equalizerG/M/A
Limiter
Voice filter
Zone 2
Zone 1
REC
Micro
Micro
Line
Line
VCA
Line BoostAux. input
Zone 1 / zone 2mixingswitch
Clip
Power supply
Pre Out. Amp In
100V
100V
4/8Ω
4/8Ω
70V
70V
25V
25V
low and high impedance outputs
(isolated)
Focal Limiter. Intelligent controle of the incoming
and outgoing signals
Input1
Micro
48V
Voice filter
Auto priority
Voice filter
Line
VoxPriority input
Micro
Line
Input 2
Input 3
Input 4
High dynamics on micro input
Exclusive Focalvoice filters,
always intelligible voices
Sound level remote control through optional
VCA and 0-10V controller
Mixing inputs allocated to outputs
Zone 1 and 2
Insertion loop for audio processor.
Class D amplifier. High efficiency,
high performance
3.5mm jack input infront panel
4 stereo zones / 8 inputs including 1 with Vox priority control
Synoptic
Front panel description
1 On / off / standby
2 On/Off switch
3 Clipping and signal diodes
4 Sound level potentiometer
5 Clippind diodes
6 Sound level potentiometer
7 Bass, Midbass, Treble potentiometer
8 Sound level potentiometer
9 Input auxiliary
10 Gain switch of auxiliary input
11 Mono mode switch
12 Mono Diode
13 Zone 1 switch
14 Zone 2 switch
12 3 4 5 7
910 11
6
1514
8
121316
Key points
w Class D amplifiers Thanks to its amplification components Class D Hypex, the Flex Power 2120 benefits from an excellent energetic efficiency, which doesn’t
consume much in full power as well as in standby and reproduces an outstanding sound quality.
w Exclusive limiter and voice filters The sophisticated limiter was designed to avoid the full saturation of the amplifiers even in the case of excessive use. The exclusive voice filters are the guarantee of a perfect intelligibility and they are coupled with high dynamics micro inputs, with
anti-clipping functions.
w Mixing inputs, 2 output zones The Flex Power 2120 was designed to transport the stereo signals of its 4 input zones (total: 8 inputs plus a front panel with 4 micro
with priority detection on input 1) on the two output zones. An output for the sound recorder and a loop that permit the insertion of an audio-processor (anti-larsen effect, EQ, DSP...) are also available.
w High-power in stereo 2 x 120W are available in low impedance outputs (4Ω / 8Ω), but also in high impedance (25V / 70V / 100V) with almost the same
performance. Thanks to its hybrid connection mode, the Flex Power 2120 can work simultaneously with high and low-impedance loudspeakers (stereo configuration with two 8Ω monitors plus 100V reinforcements for example). The high impedance outputs on the transformer are entirely isolated.
Back panel description
1 Micro gain potentiometer
2 Inputs 1 to 4 Dipswitch
3 VCA
4 Zone 2
5 Speaker Zone 1 (left)
6 Line 25 / 70 / 100V
7 Standby remote
8 115V / 220V
9 Power supply cord plug with fuse
10 Line 25 / 70 / 100V
11 Speaker Zone 1 (right)
12 Record
13 Pre-Out / Amp-in
14 Input 1 to 4
15 Vox potentiometer
16 Priority