Introduction

Chemical users/handlers are highly prone to chemical

hazardous exposures . They have a ‘Right-To-Know’ of

their exposure to all the chemicals and scheduled

wastes involved, as per stated by Occupational Safety

Health Act 1994 and their regulations. They must be

fully aware, trained and provided with sufficient

personal protective equipment and engineering-

controlled devices to reduce their hazardous exposure

levels. It is also essential to control entrance of

unregistered chemicals and establish total chemical

management procedures at the workplace.

NSB/29/2020

TOTAL CHEMICAL MANAGTOTAL CHEMICAL MANAGTOTAL CHEMICAL MANAGEMENTEMENTEMENT

October 22-23, 2020 9.00AM – 5.00PM FMM NS Branch, S2

September 8, 2020 FMM NS/SOCSO SEMINAR ON

Course Content

Day 1

Ice-breaker and Introduction Safety as a Working Culture Discussion on your current chemical work-task &

processes? (Detailed explanation of chemicals-involved processes)

Basic Chemical Safety Important points on OSH (CLASS) Regulation 2013

(Duties of Supplier, Employer & Employee , SDS & Labels, ICOP & CIMS)

Important points on OSH (USCEHH) Regulation 2000 (Chemical Register @ Register of Chemicals Hazardous to Health, CHRA, Controlling Risk of Chemicals, LEV & Engineering Control, Training requirements, Medical surveillance program, USECHH Standard Entrance to Chemical Area Labelling, Transfer of records, Issues in Industrial Hygiene)

ICOP & Guidelines-related to Chemicals Safety Safety Data Sheet (SDS) – tips for better understanding Day 2

Towards Chemical Safety Management (Vendor selection, Chemical entrance to the workplace, Warehouse requirements, Chemical handling, mixing & disposal) Proper Selection and Usage of the Chemical PPEs Requirements for Chemical handling & spill

decontamination equipment Procedure for Chemical Spill Decontamination Response Multimedia presentation on Chemical Safety & Response Evaluation Test Q & A and Course Evaluation

Objectives

Upon completion of this program, participants will: Have a better knowledge on the existing regulations

on Chemical Usage and Exposure, Chemical Spill Response.

Be able to segregate chemical properly during storage and usage.

Be able to properly apply the PPE and Engineering control involved.

Be able to interpret Safety Data Sheet (SDS) Have better understandings on the existing/future

improved Chemical handling requirements , proper personal protective equipment, functions of Local exhaust ventilation and procedures on chemical spills/release.

Be familiar with the Chemical Spill Procedure and existing chemical spill equipment.

Target Participants

Safety Officer/Safety and Health Committee Members/Laboratory and Workshop-Related Lecturers and Technicians/

Security Supervisors/External Landscape Contractors/Canteen Supervisors/Housekeeping Supervisors

For enquiries, kindly contact:

FMM Negeri Sembilan Branch, Ms. Herdawaty, herdawaty@fmm.org.my /

Ms. Niza, niza@fmm.org.my Tel: 06-603 1626/1616 Fax: 06-603 1628

Participation Fee (fee is inclusive of SST at 6%)

Members : RM 948.70 per pax Non-Members : RM 1,075.90 per pax

5% Discount for Group Registration of three (3) or more participants from the same company.

*FMM will strictly observe the SOP from the National Security Council (NSC) related to the COVID-19 pandemic during the training.

REGISTRATION FORM

FMM Negeri Sembilan Branch Fax : 06-603 1628 Please Tick (/)

Name Designation Email Vegetarian

Meal

1. __________________________________ _________________________ ____________________________

2. __________________________________ _________________________ ____________________________

3. __________________________________ _________________________ ____________________________

Payment:

Full payment of RM___________ will be made via Cheque/bank draft Direct bank-in

Please Tick (/) FMM Member FMM Membership No :

Submitted By: NON– Member

Name : _________________________________________________ Designation : __________________________________

Company : ____________________________________________________________

Address : _____________________________________________________________

_____________________________________________________________________

Tel : ________________________________ Fax : ___________________________

Email : _____________________________________________ Company Stamp

FMM NS/SOCSO SEMINAR ON

TOTAL CHEMICAL MANAGTOTAL CHEMICAL MANAGTOTAL CHEMICAL MANAGEMENTEMENTEMENT

Upon faxing/mailing the completed Registration Form to FMM, you are deemed to have read and accepted the terms and conditions. The program would also be deemed as confirmed unless informed otherwise.

Registration will be based on first-come-first served basis. Must be made in writing to FMM. Cheque made payable to Federation of Malaysian

Manufacturers. All registration together with the payment should be made before the event date. Certificate will only be issued upon full payment.

Malayan Banking Berhad A/C No: 505176510151

FMM’ SST Registration No: W10-1901-32000105 Full payment charged for cancellation within 2 days prior

to the programme. 50% payment charged for cancellation between 3-6 days. No payment charged for cancellation within 7 days prior to

the programme. Participants who did not turn-up will be charged full

payment. Replacement can be accepted at no additional cost. FMM reserves the right to cancel or reschedule the

program.

Closing Date : October 15, 2020

Speaker’s Profile

Mr. Izil Kamal holds a Master of Occupational Safety and

Health Risk Management, MBA, B Eng (Hons.) in Chemical

Engineering, Diploma in Industrial Chemistry and

Certificate in Electrical Process Instrumentation . He had

also attended numerous Train-the-Trainer program from

NIOSH & HRDC (PSMB) Train-the-trainer and various risk,

safety, technical and management skill trainings. He is also

an ISO 9001, ISO 14001 lead assessor and an associate

member of Institution of Chemical Engineers. He initially

pursued his industrial careers with a tyre-making industry

as QA Engineer, then pursued a career in electronics storage

memory devices and Integrated circuit industries as

Facilities & EHS-senior department position. His previous

industrial responsibilities includes handling total Quality

and EHS management, Emergency Response Team, general

plant maintenance, plants utilities, X-ray Radiation

protection officer, Chemical Health Risk Assessor, general

housekeeping, operations of plant’s pollution control

equipment. Previously he was also a tutor for a university’s

Bachelor of Occupational Safety and Health program.

Currently he is one of the DOSH-approved trainers for

Certificate in Safety & Health Officer course, trainer for OSH

Coordinator (OSH-C) and trainer for Continuous Education

Program (CEP) for Safety and Health Officers trainings.

Registration & Payment

October 22-23, 2020 9.00AM – 5.00PM FMM NS Branch, S2