flyer elc 2015 · 2019. 6. 29. · control port profibus harmonic current distortion thdi 33%...

ELC®

Electronic Lamp Control

eta plus electronic gmbh

part of the IST METZ group, Lauterstrasse 29, D-72622 Nuertingen, Germany

tel: +49 (0)7022 60 02 813; fax: +49 (0)7022 60 02 888

@: [email protected] www.eta-uv.de Stand: Sept.13

2/1

9/2

015

2

ELC® general information

The electronic lamp control units ELC®

are designed to power UV medium

pressure discharge lamps. In four

different series we offer fully integrated

electronic lamp control solutions for UV

lamps from 3 kW to 35 kW.

Various air and water based cooling

options offer most flexible and reliable

power system integration. Special

versions are designed for marine

applications such as BWMS, ballast

water treatment on ships.

The ELC® control strategies allow easy

PLC connection via PROFIBUS, Modbus

or analog signals, and supports smart

lamp control, safety and servicing

options.

Technology:

All ELC® are based on a high

frequency resonant power converter to

precisely power the medium pressure

lamps. This topology combines highest

efficiency at lowest electromagnetic

interference. The fully insulated lamp

output allows perfect lamp matching as

well as short circuit and earth fault

resistant operation.

Our MP lamps:

Our customer-specific in-house lamp

development and manufacturing permits

the optimum component match for your

UV system. Coupled with the consistent

quality strategy, we supply the

industries most reliable and efficient UV

components available on the UV-

market.

� system reliability- smart soft ignition

- highest lamp lifetime

� efficiency

- low heat exhaust - highest ambient temperature

- energy savings

� step less lamp control - dimming range 20% - 100%

- precisely controlled and monitored lamp status

� mains compliance- high power factor- low harmonic distortion

- symmetric load- no inrush current

- no start-up over-current

� safety features

- insulated lamp output- integrated earth fault detection- short circuit proof

ELC® is a registered trademark of IST Metz GmbH

2/1

9/2

015

3

ELC® N series

• nominal lamp power: 4 kW to 32 kW

• analog / digital PLC control port

• highest efficiency

• protection IP 20

• air cooled

ELC® P series


• PROFIBUS control

• highest efficiency


• air cooled

ELC® X series

• lamp power: 6 kW, 8 kW, 4kW, 12kW*

• Modbus and PROFIBUS control

• wide input voltage range 360 V to 528 V

• lowest harmonic distortion THDi


• integrated heat exchange

• X_B series option for marine applications

ELC® IP series


• field bus (PROFIBUS) control


• water cooled

ELC® series

* 12kW under development

2/1

9/2

015

4

ELC® X series

CE, EN 50 178, (UL and IMO under development)*approvals

built-in safety relay for emergency stopsafety interrupt

45 °C (X_B series 55°C)max. ambient temperature

voltage, current, power, statuslamp monitoring

470mm x 125 mm (w x h)

depth: X4: 260mm, X6: 320mm, X8: 420mm, X12: 420mm

dimensions

X6: 14 kg, X8: 19 kg *weight

stacking option allows cabinet-free installation of up to 12

modules in one tower

special feature

standardearth fault detection

40m (standard), (100m with special lamp cable)*max. distance to lamp

IP66protection

forced air cooling, no air filter requiredcooling

typ. 0.98power factor

16% to 100%*lamp dimming range

PROFIBUS and Modbuscontrol port

< 10%harmonic current distortion THDi

typ. 94%efficiency

wide input range 360V - 528V, 2 phase mains voltage

1100 V

800 V

600 V

400 V

Lamp voltage

Appendix A12 kWELC X12-110*

Appendix A8 kWELC X8-80

Appendix A4 kWELC X4-40

Dimensions seeLamp powerType

6 kW Appendix AELC X6-60

The result of intense in-house R&D and market experience; The X series combines ideal mains compatibility with a highly innovative cooling principle for best reliability and maximum installation flexibility. The field bus allows smart control and in-field diagnostics.

* under development

* preliminary data, subject to technical alterations, data may vary over types

2/1

9/2

015

5

ELC® X_B series

Appendix A

Appendix A

Appendix A

Appendix A

Dimensions see

1100 V

800 V

600 V

400 V

Lamp voltage

12 kWELC X12B-110*

8 kWELC X8B-80

4 kWELC X4B-40*

Lamp powerType

6 kWELC X6B-60

For marine applications like BWMS; This version of ELC X series is designedin compliance with IMO MEPC174(58) regulation.

* under development

subject to technical alterations, data may vary over types

� max. temperature 55°C

� vibration proof

� humidity proof (IP66 rated design)

� built-in heat exchange

� included harmonic filter optimized for generator supply

� wide supply input 360 to 528 V, fully covers 440V ±20%

� advanced lamp ignition for low temperatures

� lamp distance up to 100m

� highest power density

� designed according to MEPC174(58)

2/1

9/2

015

6

ELC® P series

CE, EN 50 178approvals

yessafety interrupt

40 °C to 50 °C (depending on ELC type)max. ambient temperature

voltage, current, powerlamp monitoring

see table abovedimensions

typ. 15 kg to 37 kgweight


15 to 40m (depending on ELC type)max. distance ELC® to lamp

IP20protection

forced air coolingcooling

P type: typ. 0.93, PE type: typ. 0.90power factor

20% to 100%lamp dimming range

PROFIBUScontrol port

P type: 33%, PE type: typ. 36% *harmonic current distortion THDi

P type: typ. 96%, PE type: typ. 94%efficiency

400 V or 480 V, ± 10%, 3 phase, 50/60 Hzmains voltage

on request

on request

on request

on request

ELC P10-480-80*

ELC P5HV-480-40

Type

480 V version

Appendix C2200V22 kWELC PE22-400-220

Appendix D800V10 kWELC P10-400-80

Appendix D400V5 kWELC P5HV-400-40

2800V

1400V

1100V

Lamp

voltage

Dimensions

see

Lamp

power

Type

400 V version

32 kW

16 kW

12 kW

Appendix CELC PE32-400-280

Appendix BELC PE16-400-140

Appendix BELC PE12-400-110

Based on the N series, the P series offers a smart digital field bus control combined with highest power density in a compact and efficient design. The field bus control enables in-field diagnostics, and significantly reduces wiring.

subject to technical alterations

* PE type requires additional mains choke UK = 4%

* under development

2/1

9/2

015

7

ELC® N series

CE, EN 50 178, (UL depending on ELC type)approvals

nosafety interrupt

40 °C to 50 °c (depending on ELC type)max. ambient temperature

current, powerlamp monitoring

see table abovedimensions

typ. 15 kg to 37 kgweight



IP20protection

forced air coolingcooling

N type: typ. 0.93, NE type: typ. 0.88power factor


analog 0-10V, digital I/O, PLC compatiblecontrol port

N type: 33%, NE type: typ. 45% *harmonic current distortion THDi

N type: typ. 96%, NE type: typ. 94% (depending on ELC type)efficiency

400 V or 480 V, ± 10%, 3 phase, 50/60 Hzmains voltage

Appendix D400Vtwo times 4 kWELC N2x4-480-40ELC N2x4-400-40

Appendix D400V4 kWELC N2x4-480-40ELC N4HV-400-40

on request

on request

on request

on request

ELC N10-480-80

ELC N8-480-80

ELC N6-480-75

ELC N5HV-480-40

ELC N3HV-480-30

Type

480 V version

Appendix C2200V22 kWELC NE22-400-220

Appendix D800V10 kWELC N10-400-80



Appendix D400V5 kWELC N5HV-400-40

Appendix D300V3 kWELC N3HV-400-30

2800V

1400V

1100V

Lamp

voltage

Dimensions

see

Lamp

power

Type

400 V version

32 kW

16 kW

12 kW

Appendix CELC NE32-400-280

Appendix BELC NE16-400-140

Appendix BELC NE12-400-110

A modular ELC® concept offering the highest efficiency and process stability for all applications. The analog control port offers easy connection to any PLC.

subject to technical alterations * NE type requires additional mains choke UK = 4%

2/1

9/2

015

8

ELC® IP series

CE, EN 50 178approvals

standardsafety interrupt

35 °C max. water temperature

voltage, current, powerlamp monitoring

approx. 540 x 130 x 235 mm (h x w x d)dimensions

approx. 15 kgweight



IP65protection

water 3L / mincooling

typ. 0.93power factor


PROFIBUScontrol port

33%harmonic current distortion THDi

typ. 96%efficiency

400 V or 480 V, 3 phase , ± 10%, 50/60 Hzmains voltage

ELC P10IP-480-80*

ELC P5IP-480-40*

Type

480 V version

800V10 kWELC P10IP-400-80

400V5 kWELC P5IP-400-40*

Lamp

voltage

Lamp

power

Type

400 V version

Perfectly protected water-cooled ELC® for harsh operating conditions. This series is controlled via PROFIBUS, allowing smart control and in-field diagnostics.

subject to technical alterations

* on request

2/1

9/2

015

9

Appendix A: ELC® X series

ELC® X4

ELC® X6

ELC® X8, X12

2/1

9/2

015

10

Appendix B: ELC® NE12, NE16, PE12 , PE16

501 m

m

min

. 150

540 m

m

31 mm 31 mm

650 m

m

200 mm

Obentop

min

. 150

261 mm

263,5

mm

control connector

Lampenstecker lampconnection

Netzanschlußline input

Luftaustrittair exhaust

Steckerleiste für Steuersignale

Lufteintrittair entrance

2/1

9/2

015

11

501 m

m

min

. 150

540 m

m

31 mm 31 mm

650 m

m

200 mm

Obentop

min

. 150

261 mm

control connector

Lampenstecker lampconnection

Netzanschlußline input


Steckerleiste für Steuersignale


484 m

m



Appendix C: ELC® NE22, NE32, PE22, PE32

2/1

9/2

015

12

Appendix D: ELC® N3 to N10, P5 to P10

Back mounting(see manual for further info)

Side-by-side rack mounting(see manual for further info)

321 mm

130 m

m

min

. 20

min

. 50

top

473 m

m

min

. 100

min

. 100

520 m

m

539 m

m

80 mm23 mm

M8 (4x)

Lamp feeder connection

mains connection

pin-and-socket connectorfor control signals

flyer elc 2015 · 2019. 6. 29. · control port profibus harmonic current distortion thdi 33%...

Documents