Fluke ConnectFluke Corp.

FLUKE 43x-II S/N 23703125

Bobs

Defaut

A01234B5678C9101D2345

linksys

Connect

0

1 2 3

1 2 3 4

4

5

5

SAVESCREEN

SAVESCREEN

iOS

ANDR

OID

43x-II FC

Fluke ConnectTM for Power Quality Analyzer

PN 4758947 February 2016© 2016 Fluke Corporation. Product specifications are subject to change without notice. All rights reserved. All trademarks are the property of their respective owners.

The Fluke ConnectTM app works with Apple and Android mobile products. The app is available for download from the Apple App Store and Google Play.

Fluke ConnectTM

Smart phone, wireless service and data plan not included with purchase. First 5 GB of storage is free. Compatible with iPhone 4x and up running iOS 7 or higher, iPad (in an iPhone frame on iPad); Samsung Galaxy S4 running Android™ 4.3.x or higher and Samsung Galaxy S, Nexus 5, HTC One and One M8 running Android™ 4.4.x or higher. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

1. Download the Fluke Connect app.2. Turn on the Analyzer.

The internal WiFi SD Card is enabled when the Analyzer is on.

See Users Manual for “Safety Information” and User information.

Go to www.fluke.com to register your product and find more information.

1. Go to Settings > WiFi.2. Turn on WiFi.3. Select Fluke 43x-II<s/n>.

1. Open Fluke Connect™ app.2. Select Connect.

Select Fluke 430-II<s/n>.

1.

For more information about how to use Fluke Connect™, go to http://connect.fluke.us.

1. Open Fluke Connect™ app.2. Select Connect.

Select Fluke 430-II<s/n>. 1. For more information about how to use Fluke Connect™, go to http://connect.fluke.us.

2.

2.

Quick Start Guide

Regulatory Statements for FC-SD 8 GB-C Fluke Connect Wireless SD Card

United StatesFederal Communications Commission (FCC) Notice (USA)

FCC ID: ZVZP42350FA2

FFC-SD 8 GB-C Fluke Connect Wireless SD Card

Capacity 8 GB

Speed Class 10

Network encryption WEP, WPA, or WPA2

Wireless LAN IEE801.11b/g/n (2.4 GHz SISO, 20 MHz)

Weight Approx. 2 g

Dimensions 32.0 mm x 24.0 mm x 2.1 mm

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and the

receiver. ● Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. ● Consult the dealer or an experienced radio or television

technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To comply with the FCC RF exposure

compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity for Products Marked with the FCC Logo (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This devicemay not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

MexicoIFETEL: RCPFLFC15-0842

La operación de este equipo está sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

CanadaIC ID: 9906A- P42350FA2

This device complies with the Canadian ICES-003 Class B specifications and RSS-210 of Industry Canada. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Avis CanadienCet appareil est conforme a la norme canadienne NMB-003 classe B et CNR-210 d’Industrie Canada. Ce dispositif numerique de classe B respecte toutes les exigences du Reglement canadien materiel brouilleur. Fonctionnement sans fil est soumis a deux conditions. La premiere est que l’appareil sans fil peut ne pas provoquer des interferences. La seconde est que le dispositif sans fil doit accepter toute interference, y compris les interferences qui peuvent causer un mauvais fonctionnement de l’appareil. Pour se conformer aux exigences de conformite RF canadienne l’exposition, cet appareil et son antenne ne doivent pas etre co-localises ou fonctionnant en conjonction avec une autre antenne ou transmetteur.

BrazilEste produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n° 242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referente a campos elétricos, magnéticos e eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informações, consulte o site da Anatel www.anatel.gov.br

Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.