flow access module (fam) life of field ... - enpro subsea · universal subsea interface enpro...
TRANSCRIPT
do more ... with less
Project Specific “bespoke” Tree Standard Tree with Flow Access Module
The FAM solution is located ‘off the tree’, it is independent of all major subsea hardware decisions, thereby enabling fast-track procurement and optimum use of existing or stock hardware, including subsea xmas trees.
ESSI Flow Access Module (FAM) is a universal ‘open standard’ enhanced production solution that enables Operators to realise the maximum value from their assets. The FAM hub is deployed at multiple locations including jumper hub, PLET or manifold. It is a safe access port for well or pipeline operations and is either retrofitted into existing subsea hardware or considered as part of a new field development strategy. The FAM modules are deployed using standard ESSI topside equipment and tooling. The modules can be used individually, concurrently or in combinations to provide a range of production optimisation solutions.
Flow Access Modules (FAM)
Flow Access Modules(FAM)
do more ... with less
• EnhancedProductionthroughlifeoffieldusingstandardised Xmas tree and existing subsea hardware
• Lowcostfielddevelopmentstrategy• Enableswellstimulation,multiphasemetering,
samplingetcatmultiplelocations• Fasttrackprocurementusingstandard
components
DECOMEX
OPEXCAPEX
Flow Access Module (FAM)
٠ Multiphase Metering٠ Multiphase Pumping٠ Fluid Sampling٠ Fluid Intervention٠ Flow Assurance٠ Solids Management٠ HIPPS
٠ Characterization of trapped fluids٠ In Situ sampling / validation٠ Cell drilling operations٠ Liquid & sediment analysis٠ 3D cavity survey٠ Pumping / fluid extraction٠ Legacy condition monitoring٠ Project management٠ FEED & preFEED surveying services
٠ Fluid Intervention ◦ Acid Stimulation ◦ Organic scale removal (solvent treatments) ◦ Inorganic scale removal (CaCO3 & BaSO4) ◦ Pipeline hydrate removal ◦ Fines treatments ◦ Tubing washes (brines, acids, chelants) ◦ Flow line clean (brines, acids) ◦ Water injection tests (sea water) ◦ Production liquid & gas ◦ Produced water identification ◦ Scale squeeze inhibitor concentrations ◦ Multiphase flow meter calibration ◦ Commissioning i.e glycol / solids
٠ IRM
Flow Intervention Services (FIS)
Decom
Flow Thru Hub Metering Intervention
Sampling
HIPPS Pumping
Metering & InterventionSolids Removal
Chemical Injection / Flushing
Life of Field solutions from single interface
© 2016 Enpro Subsea Limited, 16 Abercrombie Court, Westhill, Aberdeen, Scotland, AB32 6FE. Tel: +44 (0) 1224 974000 www.enpro-subsea.com
UNIVERSAL SUBSEA INTERFACE Enpro Subsea supports all vendor configurations, manufacturers and regions. This ‘open standard’ enables safe access to hydrocarbon flow providing multiple production optimisation solutions throughout the life of field.
FLEXIBLE DEVELOPMENT STRATEGIESThe ESSI FAM hub allows the operator to delay procurement decisions until later in project life without impacting the overall schedule of delivery of critical hardware.
LOW COST DEVELOPMENT STRATGIESWhen the ESSI FAM hub is fabricated in to the jumper at the manufacturing stage it has minimal cost impact over the standard gooseneck or target tee that it replaces.
MULTIPLE APPLICATIONS The ESSI FAM system can be used for well stimulation, multiphase metering, multiphase pumping, sand control, HIPPS & fluid sampling.
MULTIPLE LOCATIONS The ESSI Flow Access Module (FAM) hub can be located at the Xmas tree jumper, the PLET or at the manifold.
WELL & PROCESS CONTROL One installed, the ESSI FAM system provides access for well control / well kill operations.
PIPELINE MAINTENANCE ACCESS The ESSI FAM system enables hydrate remediation and high volume flushing at the pipeline.
FAST TRACK PROCUREMENT The ESSI FAM hub is independent of subsea xmas tree or pipeline interface specification and requires no modification to the xmas tree and therefore enables ‘fast track procurement’ of associated hardware.
STANDARD COMPONENTS The patented ESSI system is comprised of industry proven pre-qualified, cost effective hardware. This enables rapid project delivery and operations.
FlowAccessModules(FAM)Advantages:
do more ... with less
FLUID INTERVENTION - squeeze, acid treatment, well control / kill
MULTIPHASE METERING - for fiscal and production management
FLOW ASSURANCE - for production injection and integrity
MULTIPHASE PUMPING - for production boosting
Metering
Sampling
Pumping
HIPPS
SAMPLING - for adjustable fluid take-off throughout Life of Field
HIPPS - for retrievable HIPPS system for early production and reuse
SOLIDS MANAGEMENT – retrievable solution for failed downhole screen
INTEGRATED FAM - for multiple services from a single hub
Metering,Sampling&Injection
FlowIntervention/Stimulation